Annotation of embedaddon/lighttpd/doc/config/Makefile.in, revision 1.1.1.2

1.1.1.2 ! misho       1: # Makefile.in generated by automake 1.14.1 from Makefile.am.
1.1       misho       2: # @configure_input@
                      3: 
                      4: # Copyright (C) 1994-2013 Free Software Foundation, Inc.
                      5: 
                      6: # This Makefile.in is free software; the Free Software Foundation
                      7: # gives unlimited permission to copy and/or distribute it,
                      8: # with or without modifications, as long as this notice is preserved.
                      9: 
                     10: # This program is distributed in the hope that it will be useful,
                     11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
                     12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
                     13: # PARTICULAR PURPOSE.
                     14: 
                     15: @SET_MAKE@
                     16: VPATH = @srcdir@
                     17: am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
                     18: am__make_running_with_option = \
                     19:   case $${target_option-} in \
                     20:       ?) ;; \
                     21:       *) echo "am__make_running_with_option: internal error: invalid" \
                     22:               "target option '$${target_option-}' specified" >&2; \
                     23:          exit 1;; \
                     24:   esac; \
                     25:   has_opt=no; \
                     26:   sane_makeflags=$$MAKEFLAGS; \
                     27:   if $(am__is_gnu_make); then \
                     28:     sane_makeflags=$$MFLAGS; \
                     29:   else \
                     30:     case $$MAKEFLAGS in \
                     31:       *\\[\ \  ]*) \
                     32:         bs=\\; \
                     33:         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
                     34:           | sed "s/$$bs$$bs[$$bs $$bs  ]*//g"`;; \
                     35:     esac; \
                     36:   fi; \
                     37:   skip_next=no; \
                     38:   strip_trailopt () \
                     39:   { \
                     40:     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
                     41:   }; \
                     42:   for flg in $$sane_makeflags; do \
                     43:     test $$skip_next = yes && { skip_next=no; continue; }; \
                     44:     case $$flg in \
                     45:       *=*|--*) continue;; \
                     46:         -*I) strip_trailopt 'I'; skip_next=yes;; \
                     47:       -*I?*) strip_trailopt 'I';; \
                     48:         -*O) strip_trailopt 'O'; skip_next=yes;; \
                     49:       -*O?*) strip_trailopt 'O';; \
                     50:         -*l) strip_trailopt 'l'; skip_next=yes;; \
                     51:       -*l?*) strip_trailopt 'l';; \
                     52:       -[dEDm]) skip_next=yes;; \
                     53:       -[JT]) skip_next=yes;; \
                     54:     esac; \
                     55:     case $$flg in \
                     56:       *$$target_option*) has_opt=yes; break;; \
                     57:     esac; \
                     58:   done; \
                     59:   test $$has_opt = yes
                     60: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
                     61: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
                     62: pkgdatadir = $(datadir)/@PACKAGE@
                     63: pkgincludedir = $(includedir)/@PACKAGE@
                     64: pkglibdir = $(libdir)/@PACKAGE@
                     65: pkglibexecdir = $(libexecdir)/@PACKAGE@
                     66: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
                     67: install_sh_DATA = $(install_sh) -c -m 644
                     68: install_sh_PROGRAM = $(install_sh) -c
                     69: install_sh_SCRIPT = $(install_sh) -c
                     70: INSTALL_HEADER = $(INSTALL_DATA)
                     71: transform = $(program_transform_name)
                     72: NORMAL_INSTALL = :
                     73: PRE_INSTALL = :
                     74: POST_INSTALL = :
                     75: NORMAL_UNINSTALL = :
                     76: PRE_UNINSTALL = :
                     77: POST_UNINSTALL = :
                     78: build_triplet = @build@
                     79: host_triplet = @host@
                     80: target_triplet = @target@
                     81: subdir = doc/config
                     82: DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
                     83: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
                     84: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
                     85:        $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
                     86:        $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
                     87:        $(top_srcdir)/configure.ac
                     88: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
                     89:        $(ACLOCAL_M4)
                     90: mkinstalldirs = $(install_sh) -d
                     91: CONFIG_HEADER = $(top_builddir)/config.h
                     92: CONFIG_CLEAN_FILES =
                     93: CONFIG_CLEAN_VPATH_FILES =
                     94: AM_V_P = $(am__v_P_@AM_V@)
                     95: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
                     96: am__v_P_0 = false
                     97: am__v_P_1 = :
                     98: AM_V_GEN = $(am__v_GEN_@AM_V@)
                     99: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
                    100: am__v_GEN_0 = @echo "  GEN     " $@;
                    101: am__v_GEN_1 = 
                    102: AM_V_at = $(am__v_at_@AM_V@)
                    103: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
                    104: am__v_at_0 = @
                    105: am__v_at_1 = 
                    106: SOURCES =
                    107: DIST_SOURCES =
                    108: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
                    109:        ctags-recursive dvi-recursive html-recursive info-recursive \
                    110:        install-data-recursive install-dvi-recursive \
                    111:        install-exec-recursive install-html-recursive \
                    112:        install-info-recursive install-pdf-recursive \
                    113:        install-ps-recursive install-recursive installcheck-recursive \
                    114:        installdirs-recursive pdf-recursive ps-recursive \
                    115:        tags-recursive uninstall-recursive
                    116: am__can_run_installinfo = \
                    117:   case $$AM_UPDATE_INFO_DIR in \
                    118:     n|no|NO) false;; \
                    119:     *) (install-info --version) >/dev/null 2>&1;; \
                    120:   esac
                    121: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
                    122:   distclean-recursive maintainer-clean-recursive
                    123: am__recursive_targets = \
                    124:   $(RECURSIVE_TARGETS) \
                    125:   $(RECURSIVE_CLEAN_TARGETS) \
                    126:   $(am__extra_recursive_targets)
                    127: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
                    128:        distdir
                    129: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
                    130: # Read a list of newline-separated strings from the standard input,
                    131: # and print each of them once, without duplicates.  Input order is
                    132: # *not* preserved.
                    133: am__uniquify_input = $(AWK) '\
                    134:   BEGIN { nonempty = 0; } \
                    135:   { items[$$0] = 1; nonempty = 1; } \
                    136:   END { if (nonempty) { for (i in items) print i; }; } \
                    137: '
                    138: # Make sure the list of sources is unique.  This is necessary because,
                    139: # e.g., the same source file might be shared among _SOURCES variables
                    140: # for different programs/libraries.
                    141: am__define_uniq_tagged_files = \
                    142:   list='$(am__tagged_files)'; \
                    143:   unique=`for i in $$list; do \
                    144:     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
                    145:   done | $(am__uniquify_input)`
                    146: ETAGS = etags
                    147: CTAGS = ctags
                    148: DIST_SUBDIRS = $(SUBDIRS)
                    149: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
                    150: am__relativize = \
                    151:   dir0=`pwd`; \
                    152:   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
                    153:   sed_rest='s,^[^/]*/*,,'; \
                    154:   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
                    155:   sed_butlast='s,/*[^/]*$$,,'; \
                    156:   while test -n "$$dir1"; do \
                    157:     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
                    158:     if test "$$first" != "."; then \
                    159:       if test "$$first" = ".."; then \
                    160:         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
                    161:         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
                    162:       else \
                    163:         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
                    164:         if test "$$first2" = "$$first"; then \
                    165:           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
                    166:         else \
                    167:           dir2="../$$dir2"; \
                    168:         fi; \
                    169:         dir0="$$dir0"/"$$first"; \
                    170:       fi; \
                    171:     fi; \
                    172:     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
                    173:   done; \
                    174:   reldir="$$dir2"
                    175: ACLOCAL = @ACLOCAL@
                    176: AMTAR = @AMTAR@
                    177: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
                    178: AR = @AR@
                    179: ATTR_LIB = @ATTR_LIB@
                    180: AUTOCONF = @AUTOCONF@
                    181: AUTOHEADER = @AUTOHEADER@
                    182: AUTOMAKE = @AUTOMAKE@
                    183: AWK = @AWK@
                    184: BZ_LIB = @BZ_LIB@
                    185: CC = @CC@
                    186: CCDEPMODE = @CCDEPMODE@
                    187: CFLAGS = @CFLAGS@
                    188: CPP = @CPP@
                    189: CPPFLAGS = @CPPFLAGS@
                    190: CRYPT_LIB = @CRYPT_LIB@
                    191: CYGPATH_W = @CYGPATH_W@
                    192: DEFS = @DEFS@
                    193: DEPDIR = @DEPDIR@
                    194: DLLTOOL = @DLLTOOL@
                    195: DL_LIB = @DL_LIB@
                    196: DSYMUTIL = @DSYMUTIL@
                    197: DUMPBIN = @DUMPBIN@
                    198: ECHO_C = @ECHO_C@
                    199: ECHO_N = @ECHO_N@
                    200: ECHO_T = @ECHO_T@
                    201: EGREP = @EGREP@
                    202: EXEEXT = @EXEEXT@
                    203: FAM_CFLAGS = @FAM_CFLAGS@
                    204: FAM_LIBS = @FAM_LIBS@
                    205: FGREP = @FGREP@
                    206: GDBM_LIB = @GDBM_LIB@
                    207: GREP = @GREP@
                    208: INSTALL = @INSTALL@
                    209: INSTALL_DATA = @INSTALL_DATA@
                    210: INSTALL_PROGRAM = @INSTALL_PROGRAM@
                    211: INSTALL_SCRIPT = @INSTALL_SCRIPT@
                    212: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
                    213: LBER_LIB = @LBER_LIB@
                    214: LD = @LD@
                    215: LDAP_LIB = @LDAP_LIB@
                    216: LDFLAGS = @LDFLAGS@
                    217: LIBEV_CFLAGS = @LIBEV_CFLAGS@
                    218: LIBEV_LIBS = @LIBEV_LIBS@
                    219: LIBOBJS = @LIBOBJS@
                    220: LIBS = @LIBS@
                    221: LIBTOOL = @LIBTOOL@
                    222: LIPO = @LIPO@
                    223: LN_S = @LN_S@
                    224: LTLIBOBJS = @LTLIBOBJS@
                    225: LUA_CFLAGS = @LUA_CFLAGS@
                    226: LUA_LIBS = @LUA_LIBS@
                    227: MAKEINFO = @MAKEINFO@
                    228: MANIFEST_TOOL = @MANIFEST_TOOL@
                    229: MEMCACHE_LIB = @MEMCACHE_LIB@
                    230: MKDIR_P = @MKDIR_P@
                    231: MYSQL_CONFIG = @MYSQL_CONFIG@
                    232: MYSQL_INCLUDE = @MYSQL_INCLUDE@
                    233: MYSQL_LIBS = @MYSQL_LIBS@
                    234: NM = @NM@
                    235: NMEDIT = @NMEDIT@
                    236: OBJDUMP = @OBJDUMP@
                    237: OBJEXT = @OBJEXT@
                    238: OTOOL = @OTOOL@
                    239: OTOOL64 = @OTOOL64@
                    240: PACKAGE = @PACKAGE@
                    241: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
                    242: PACKAGE_NAME = @PACKAGE_NAME@
                    243: PACKAGE_STRING = @PACKAGE_STRING@
                    244: PACKAGE_TARNAME = @PACKAGE_TARNAME@
                    245: PACKAGE_URL = @PACKAGE_URL@
                    246: PACKAGE_VERSION = @PACKAGE_VERSION@
                    247: PATH_SEPARATOR = @PATH_SEPARATOR@
                    248: PCRECONFIG = @PCRECONFIG@
                    249: PCRE_LIB = @PCRE_LIB@
                    250: PKG_CONFIG = @PKG_CONFIG@
                    251: PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
                    252: PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
                    253: RANLIB = @RANLIB@
                    254: SED = @SED@
                    255: SENDFILE_LIB = @SENDFILE_LIB@
                    256: SET_MAKE = @SET_MAKE@
                    257: SHELL = @SHELL@
                    258: SQLITE_CFLAGS = @SQLITE_CFLAGS@
                    259: SQLITE_LIBS = @SQLITE_LIBS@
                    260: SSL_LIB = @SSL_LIB@
                    261: STRIP = @STRIP@
                    262: UUID_LIBS = @UUID_LIBS@
                    263: VERSION = @VERSION@
                    264: XML_CFLAGS = @XML_CFLAGS@
                    265: XML_LIBS = @XML_LIBS@
                    266: Z_LIB = @Z_LIB@
                    267: abs_builddir = @abs_builddir@
                    268: abs_srcdir = @abs_srcdir@
                    269: abs_top_builddir = @abs_top_builddir@
                    270: abs_top_srcdir = @abs_top_srcdir@
                    271: ac_ct_AR = @ac_ct_AR@
                    272: ac_ct_CC = @ac_ct_CC@
                    273: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
                    274: am__include = @am__include@
                    275: am__leading_dot = @am__leading_dot@
                    276: am__quote = @am__quote@
                    277: am__tar = @am__tar@
                    278: am__untar = @am__untar@
                    279: bindir = @bindir@
                    280: build = @build@
                    281: build_alias = @build_alias@
                    282: build_cpu = @build_cpu@
                    283: build_os = @build_os@
                    284: build_vendor = @build_vendor@
                    285: builddir = @builddir@
                    286: datadir = @datadir@
                    287: datarootdir = @datarootdir@
                    288: docdir = @docdir@
                    289: dvidir = @dvidir@
                    290: exec_prefix = @exec_prefix@
                    291: host = @host@
                    292: host_alias = @host_alias@
                    293: host_cpu = @host_cpu@
                    294: host_os = @host_os@
                    295: host_vendor = @host_vendor@
                    296: htmldir = @htmldir@
                    297: includedir = @includedir@
                    298: infodir = @infodir@
                    299: install_sh = @install_sh@
                    300: libdir = @libdir@
                    301: libexecdir = @libexecdir@
                    302: localedir = @localedir@
                    303: localstatedir = @localstatedir@
                    304: mandir = @mandir@
                    305: mkdir_p = @mkdir_p@
                    306: oldincludedir = @oldincludedir@
                    307: pdfdir = @pdfdir@
                    308: prefix = @prefix@
                    309: program_transform_name = @program_transform_name@
                    310: psdir = @psdir@
                    311: sbindir = @sbindir@
                    312: sharedstatedir = @sharedstatedir@
                    313: srcdir = @srcdir@
                    314: sysconfdir = @sysconfdir@
                    315: target = @target@
                    316: target_alias = @target_alias@
                    317: target_cpu = @target_cpu@
                    318: target_os = @target_os@
                    319: target_vendor = @target_vendor@
                    320: top_build_prefix = @top_build_prefix@
                    321: top_builddir = @top_builddir@
                    322: top_srcdir = @top_srcdir@
                    323: SUBDIRS = conf.d vhosts.d
                    324: EXTRA_DIST = lighttpd.conf modules.conf
                    325: all: all-recursive
                    326: 
                    327: .SUFFIXES:
                    328: $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
                    329:        @for dep in $?; do \
                    330:          case '$(am__configure_deps)' in \
                    331:            *$$dep*) \
                    332:              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
                    333:                && { if test -f $@; then exit 0; else break; fi; }; \
                    334:              exit 1;; \
                    335:          esac; \
                    336:        done; \
                    337:        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/config/Makefile'; \
                    338:        $(am__cd) $(top_srcdir) && \
                    339:          $(AUTOMAKE) --foreign doc/config/Makefile
                    340: .PRECIOUS: Makefile
                    341: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
                    342:        @case '$?' in \
                    343:          *config.status*) \
                    344:            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
                    345:          *) \
                    346:            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
                    347:            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
                    348:        esac;
                    349: 
                    350: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
                    351:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    352: 
                    353: $(top_srcdir)/configure:  $(am__configure_deps)
                    354:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    355: $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
                    356:        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
                    357: $(am__aclocal_m4_deps):
                    358: 
                    359: mostlyclean-libtool:
                    360:        -rm -f *.lo
                    361: 
                    362: clean-libtool:
                    363:        -rm -rf .libs _libs
                    364: 
                    365: # This directory's subdirectories are mostly independent; you can cd
                    366: # into them and run 'make' without going through this Makefile.
                    367: # To change the values of 'make' variables: instead of editing Makefiles,
                    368: # (1) if the variable is set in 'config.status', edit 'config.status'
                    369: #     (which will cause the Makefiles to be regenerated when you run 'make');
                    370: # (2) otherwise, pass the desired values on the 'make' command line.
                    371: $(am__recursive_targets):
                    372:        @fail=; \
                    373:        if $(am__make_keepgoing); then \
                    374:          failcom='fail=yes'; \
                    375:        else \
                    376:          failcom='exit 1'; \
                    377:        fi; \
                    378:        dot_seen=no; \
                    379:        target=`echo $@ | sed s/-recursive//`; \
                    380:        case "$@" in \
                    381:          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
                    382:          *) list='$(SUBDIRS)' ;; \
                    383:        esac; \
                    384:        for subdir in $$list; do \
                    385:          echo "Making $$target in $$subdir"; \
                    386:          if test "$$subdir" = "."; then \
                    387:            dot_seen=yes; \
                    388:            local_target="$$target-am"; \
                    389:          else \
                    390:            local_target="$$target"; \
                    391:          fi; \
                    392:          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
                    393:          || eval $$failcom; \
                    394:        done; \
                    395:        if test "$$dot_seen" = "no"; then \
                    396:          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
                    397:        fi; test -z "$$fail"
                    398: 
                    399: ID: $(am__tagged_files)
                    400:        $(am__define_uniq_tagged_files); mkid -fID $$unique
                    401: tags: tags-recursive
                    402: TAGS: tags
                    403: 
                    404: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
                    405:        set x; \
                    406:        here=`pwd`; \
                    407:        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
                    408:          include_option=--etags-include; \
                    409:          empty_fix=.; \
                    410:        else \
                    411:          include_option=--include; \
                    412:          empty_fix=; \
                    413:        fi; \
                    414:        list='$(SUBDIRS)'; for subdir in $$list; do \
                    415:          if test "$$subdir" = .; then :; else \
                    416:            test ! -f $$subdir/TAGS || \
                    417:              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
                    418:          fi; \
                    419:        done; \
                    420:        $(am__define_uniq_tagged_files); \
                    421:        shift; \
                    422:        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
                    423:          test -n "$$unique" || unique=$$empty_fix; \
                    424:          if test $$# -gt 0; then \
                    425:            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
                    426:              "$$@" $$unique; \
                    427:          else \
                    428:            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
                    429:              $$unique; \
                    430:          fi; \
                    431:        fi
                    432: ctags: ctags-recursive
                    433: 
                    434: CTAGS: ctags
                    435: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
                    436:        $(am__define_uniq_tagged_files); \
                    437:        test -z "$(CTAGS_ARGS)$$unique" \
                    438:          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
                    439:             $$unique
                    440: 
                    441: GTAGS:
                    442:        here=`$(am__cd) $(top_builddir) && pwd` \
                    443:          && $(am__cd) $(top_srcdir) \
                    444:          && gtags -i $(GTAGS_ARGS) "$$here"
                    445: cscopelist: cscopelist-recursive
                    446: 
                    447: cscopelist-am: $(am__tagged_files)
                    448:        list='$(am__tagged_files)'; \
                    449:        case "$(srcdir)" in \
                    450:          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
                    451:          *) sdir=$(subdir)/$(srcdir) ;; \
                    452:        esac; \
                    453:        for i in $$list; do \
                    454:          if test -f "$$i"; then \
                    455:            echo "$(subdir)/$$i"; \
                    456:          else \
                    457:            echo "$$sdir/$$i"; \
                    458:          fi; \
                    459:        done >> $(top_builddir)/cscope.files
                    460: 
                    461: distclean-tags:
                    462:        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
                    463: 
                    464: distdir: $(DISTFILES)
                    465:        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
                    466:        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
                    467:        list='$(DISTFILES)'; \
                    468:          dist_files=`for file in $$list; do echo $$file; done | \
                    469:          sed -e "s|^$$srcdirstrip/||;t" \
                    470:              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
                    471:        case $$dist_files in \
                    472:          */*) $(MKDIR_P) `echo "$$dist_files" | \
                    473:                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                    474:                           sort -u` ;; \
                    475:        esac; \
                    476:        for file in $$dist_files; do \
                    477:          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
                    478:          if test -d $$d/$$file; then \
                    479:            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
                    480:            if test -d "$(distdir)/$$file"; then \
                    481:              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
                    482:            fi; \
                    483:            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
                    484:              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
                    485:              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
                    486:            fi; \
                    487:            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
                    488:          else \
                    489:            test -f "$(distdir)/$$file" \
                    490:            || cp -p $$d/$$file "$(distdir)/$$file" \
                    491:            || exit 1; \
                    492:          fi; \
                    493:        done
                    494:        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
                    495:          if test "$$subdir" = .; then :; else \
                    496:            $(am__make_dryrun) \
                    497:              || test -d "$(distdir)/$$subdir" \
                    498:              || $(MKDIR_P) "$(distdir)/$$subdir" \
                    499:              || exit 1; \
                    500:            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
                    501:            $(am__relativize); \
                    502:            new_distdir=$$reldir; \
                    503:            dir1=$$subdir; dir2="$(top_distdir)"; \
                    504:            $(am__relativize); \
                    505:            new_top_distdir=$$reldir; \
                    506:            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
                    507:            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
                    508:            ($(am__cd) $$subdir && \
                    509:              $(MAKE) $(AM_MAKEFLAGS) \
                    510:                top_distdir="$$new_top_distdir" \
                    511:                distdir="$$new_distdir" \
                    512:                am__remove_distdir=: \
                    513:                am__skip_length_check=: \
                    514:                am__skip_mode_fix=: \
                    515:                distdir) \
                    516:              || exit 1; \
                    517:          fi; \
                    518:        done
                    519: check-am: all-am
                    520: check: check-recursive
                    521: all-am: Makefile
                    522: installdirs: installdirs-recursive
                    523: installdirs-am:
                    524: install: install-recursive
                    525: install-exec: install-exec-recursive
                    526: install-data: install-data-recursive
                    527: uninstall: uninstall-recursive
                    528: 
                    529: install-am: all-am
                    530:        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
                    531: 
                    532: installcheck: installcheck-recursive
                    533: install-strip:
                    534:        if test -z '$(STRIP)'; then \
                    535:          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
                    536:            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
                    537:              install; \
                    538:        else \
                    539:          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
                    540:            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
                    541:            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
                    542:        fi
                    543: mostlyclean-generic:
                    544: 
                    545: clean-generic:
                    546: 
                    547: distclean-generic:
                    548:        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
                    549:        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
                    550: 
                    551: maintainer-clean-generic:
                    552:        @echo "This command is intended for maintainers to use"
                    553:        @echo "it deletes files that may require special tools to rebuild."
                    554: clean: clean-recursive
                    555: 
                    556: clean-am: clean-generic clean-libtool mostlyclean-am
                    557: 
                    558: distclean: distclean-recursive
                    559:        -rm -f Makefile
                    560: distclean-am: clean-am distclean-generic distclean-tags
                    561: 
                    562: dvi: dvi-recursive
                    563: 
                    564: dvi-am:
                    565: 
                    566: html: html-recursive
                    567: 
                    568: html-am:
                    569: 
                    570: info: info-recursive
                    571: 
                    572: info-am:
                    573: 
                    574: install-data-am:
                    575: 
                    576: install-dvi: install-dvi-recursive
                    577: 
                    578: install-dvi-am:
                    579: 
                    580: install-exec-am:
                    581: 
                    582: install-html: install-html-recursive
                    583: 
                    584: install-html-am:
                    585: 
                    586: install-info: install-info-recursive
                    587: 
                    588: install-info-am:
                    589: 
                    590: install-man:
                    591: 
                    592: install-pdf: install-pdf-recursive
                    593: 
                    594: install-pdf-am:
                    595: 
                    596: install-ps: install-ps-recursive
                    597: 
                    598: install-ps-am:
                    599: 
                    600: installcheck-am:
                    601: 
                    602: maintainer-clean: maintainer-clean-recursive
                    603:        -rm -f Makefile
                    604: maintainer-clean-am: distclean-am maintainer-clean-generic
                    605: 
                    606: mostlyclean: mostlyclean-recursive
                    607: 
                    608: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
                    609: 
                    610: pdf: pdf-recursive
                    611: 
                    612: pdf-am:
                    613: 
                    614: ps: ps-recursive
                    615: 
                    616: ps-am:
                    617: 
                    618: uninstall-am:
                    619: 
                    620: .MAKE: $(am__recursive_targets) install-am install-strip
                    621: 
                    622: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
                    623:        check-am clean clean-generic clean-libtool cscopelist-am ctags \
                    624:        ctags-am distclean distclean-generic distclean-libtool \
                    625:        distclean-tags distdir dvi dvi-am html html-am info info-am \
                    626:        install install-am install-data install-data-am install-dvi \
                    627:        install-dvi-am install-exec install-exec-am install-html \
                    628:        install-html-am install-info install-info-am install-man \
                    629:        install-pdf install-pdf-am install-ps install-ps-am \
                    630:        install-strip installcheck installcheck-am installdirs \
                    631:        installdirs-am maintainer-clean maintainer-clean-generic \
                    632:        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
                    633:        ps ps-am tags tags-am uninstall uninstall-am
                    634: 
                    635: 
                    636: # Tell versions [3.59,3.63) of GNU make to not export all variables.
                    637: # Otherwise a system limit (for SysV at least) may be exceeded.
                    638: .NOEXPORT:

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>