Annotation of embedaddon/lighttpd/doc/config/Makefile.in, revision 1.1.1.2
1.1.1.2 ! misho 1: # Makefile.in generated by automake 1.14.1 from Makefile.am.
1.1 misho 2: # @configure_input@
3:
4: # Copyright (C) 1994-2013 Free Software Foundation, Inc.
5:
6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16: VPATH = @srcdir@
17: am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
18: am__make_running_with_option = \
19: case $${target_option-} in \
20: ?) ;; \
21: *) echo "am__make_running_with_option: internal error: invalid" \
22: "target option '$${target_option-}' specified" >&2; \
23: exit 1;; \
24: esac; \
25: has_opt=no; \
26: sane_makeflags=$$MAKEFLAGS; \
27: if $(am__is_gnu_make); then \
28: sane_makeflags=$$MFLAGS; \
29: else \
30: case $$MAKEFLAGS in \
31: *\\[\ \ ]*) \
32: bs=\\; \
33: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
34: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
35: esac; \
36: fi; \
37: skip_next=no; \
38: strip_trailopt () \
39: { \
40: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
41: }; \
42: for flg in $$sane_makeflags; do \
43: test $$skip_next = yes && { skip_next=no; continue; }; \
44: case $$flg in \
45: *=*|--*) continue;; \
46: -*I) strip_trailopt 'I'; skip_next=yes;; \
47: -*I?*) strip_trailopt 'I';; \
48: -*O) strip_trailopt 'O'; skip_next=yes;; \
49: -*O?*) strip_trailopt 'O';; \
50: -*l) strip_trailopt 'l'; skip_next=yes;; \
51: -*l?*) strip_trailopt 'l';; \
52: -[dEDm]) skip_next=yes;; \
53: -[JT]) skip_next=yes;; \
54: esac; \
55: case $$flg in \
56: *$$target_option*) has_opt=yes; break;; \
57: esac; \
58: done; \
59: test $$has_opt = yes
60: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
61: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
62: pkgdatadir = $(datadir)/@PACKAGE@
63: pkgincludedir = $(includedir)/@PACKAGE@
64: pkglibdir = $(libdir)/@PACKAGE@
65: pkglibexecdir = $(libexecdir)/@PACKAGE@
66: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
67: install_sh_DATA = $(install_sh) -c -m 644
68: install_sh_PROGRAM = $(install_sh) -c
69: install_sh_SCRIPT = $(install_sh) -c
70: INSTALL_HEADER = $(INSTALL_DATA)
71: transform = $(program_transform_name)
72: NORMAL_INSTALL = :
73: PRE_INSTALL = :
74: POST_INSTALL = :
75: NORMAL_UNINSTALL = :
76: PRE_UNINSTALL = :
77: POST_UNINSTALL = :
78: build_triplet = @build@
79: host_triplet = @host@
80: target_triplet = @target@
81: subdir = doc/config
82: DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
83: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
84: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
85: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
86: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
87: $(top_srcdir)/configure.ac
88: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
89: $(ACLOCAL_M4)
90: mkinstalldirs = $(install_sh) -d
91: CONFIG_HEADER = $(top_builddir)/config.h
92: CONFIG_CLEAN_FILES =
93: CONFIG_CLEAN_VPATH_FILES =
94: AM_V_P = $(am__v_P_@AM_V@)
95: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
96: am__v_P_0 = false
97: am__v_P_1 = :
98: AM_V_GEN = $(am__v_GEN_@AM_V@)
99: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
100: am__v_GEN_0 = @echo " GEN " $@;
101: am__v_GEN_1 =
102: AM_V_at = $(am__v_at_@AM_V@)
103: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
104: am__v_at_0 = @
105: am__v_at_1 =
106: SOURCES =
107: DIST_SOURCES =
108: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
109: ctags-recursive dvi-recursive html-recursive info-recursive \
110: install-data-recursive install-dvi-recursive \
111: install-exec-recursive install-html-recursive \
112: install-info-recursive install-pdf-recursive \
113: install-ps-recursive install-recursive installcheck-recursive \
114: installdirs-recursive pdf-recursive ps-recursive \
115: tags-recursive uninstall-recursive
116: am__can_run_installinfo = \
117: case $$AM_UPDATE_INFO_DIR in \
118: n|no|NO) false;; \
119: *) (install-info --version) >/dev/null 2>&1;; \
120: esac
121: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
122: distclean-recursive maintainer-clean-recursive
123: am__recursive_targets = \
124: $(RECURSIVE_TARGETS) \
125: $(RECURSIVE_CLEAN_TARGETS) \
126: $(am__extra_recursive_targets)
127: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
128: distdir
129: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
130: # Read a list of newline-separated strings from the standard input,
131: # and print each of them once, without duplicates. Input order is
132: # *not* preserved.
133: am__uniquify_input = $(AWK) '\
134: BEGIN { nonempty = 0; } \
135: { items[$$0] = 1; nonempty = 1; } \
136: END { if (nonempty) { for (i in items) print i; }; } \
137: '
138: # Make sure the list of sources is unique. This is necessary because,
139: # e.g., the same source file might be shared among _SOURCES variables
140: # for different programs/libraries.
141: am__define_uniq_tagged_files = \
142: list='$(am__tagged_files)'; \
143: unique=`for i in $$list; do \
144: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
145: done | $(am__uniquify_input)`
146: ETAGS = etags
147: CTAGS = ctags
148: DIST_SUBDIRS = $(SUBDIRS)
149: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
150: am__relativize = \
151: dir0=`pwd`; \
152: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
153: sed_rest='s,^[^/]*/*,,'; \
154: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
155: sed_butlast='s,/*[^/]*$$,,'; \
156: while test -n "$$dir1"; do \
157: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
158: if test "$$first" != "."; then \
159: if test "$$first" = ".."; then \
160: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
161: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
162: else \
163: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
164: if test "$$first2" = "$$first"; then \
165: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
166: else \
167: dir2="../$$dir2"; \
168: fi; \
169: dir0="$$dir0"/"$$first"; \
170: fi; \
171: fi; \
172: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
173: done; \
174: reldir="$$dir2"
175: ACLOCAL = @ACLOCAL@
176: AMTAR = @AMTAR@
177: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
178: AR = @AR@
179: ATTR_LIB = @ATTR_LIB@
180: AUTOCONF = @AUTOCONF@
181: AUTOHEADER = @AUTOHEADER@
182: AUTOMAKE = @AUTOMAKE@
183: AWK = @AWK@
184: BZ_LIB = @BZ_LIB@
185: CC = @CC@
186: CCDEPMODE = @CCDEPMODE@
187: CFLAGS = @CFLAGS@
188: CPP = @CPP@
189: CPPFLAGS = @CPPFLAGS@
190: CRYPT_LIB = @CRYPT_LIB@
191: CYGPATH_W = @CYGPATH_W@
192: DEFS = @DEFS@
193: DEPDIR = @DEPDIR@
194: DLLTOOL = @DLLTOOL@
195: DL_LIB = @DL_LIB@
196: DSYMUTIL = @DSYMUTIL@
197: DUMPBIN = @DUMPBIN@
198: ECHO_C = @ECHO_C@
199: ECHO_N = @ECHO_N@
200: ECHO_T = @ECHO_T@
201: EGREP = @EGREP@
202: EXEEXT = @EXEEXT@
203: FAM_CFLAGS = @FAM_CFLAGS@
204: FAM_LIBS = @FAM_LIBS@
205: FGREP = @FGREP@
206: GDBM_LIB = @GDBM_LIB@
207: GREP = @GREP@
208: INSTALL = @INSTALL@
209: INSTALL_DATA = @INSTALL_DATA@
210: INSTALL_PROGRAM = @INSTALL_PROGRAM@
211: INSTALL_SCRIPT = @INSTALL_SCRIPT@
212: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
213: LBER_LIB = @LBER_LIB@
214: LD = @LD@
215: LDAP_LIB = @LDAP_LIB@
216: LDFLAGS = @LDFLAGS@
217: LIBEV_CFLAGS = @LIBEV_CFLAGS@
218: LIBEV_LIBS = @LIBEV_LIBS@
219: LIBOBJS = @LIBOBJS@
220: LIBS = @LIBS@
221: LIBTOOL = @LIBTOOL@
222: LIPO = @LIPO@
223: LN_S = @LN_S@
224: LTLIBOBJS = @LTLIBOBJS@
225: LUA_CFLAGS = @LUA_CFLAGS@
226: LUA_LIBS = @LUA_LIBS@
227: MAKEINFO = @MAKEINFO@
228: MANIFEST_TOOL = @MANIFEST_TOOL@
229: MEMCACHE_LIB = @MEMCACHE_LIB@
230: MKDIR_P = @MKDIR_P@
231: MYSQL_CONFIG = @MYSQL_CONFIG@
232: MYSQL_INCLUDE = @MYSQL_INCLUDE@
233: MYSQL_LIBS = @MYSQL_LIBS@
234: NM = @NM@
235: NMEDIT = @NMEDIT@
236: OBJDUMP = @OBJDUMP@
237: OBJEXT = @OBJEXT@
238: OTOOL = @OTOOL@
239: OTOOL64 = @OTOOL64@
240: PACKAGE = @PACKAGE@
241: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
242: PACKAGE_NAME = @PACKAGE_NAME@
243: PACKAGE_STRING = @PACKAGE_STRING@
244: PACKAGE_TARNAME = @PACKAGE_TARNAME@
245: PACKAGE_URL = @PACKAGE_URL@
246: PACKAGE_VERSION = @PACKAGE_VERSION@
247: PATH_SEPARATOR = @PATH_SEPARATOR@
248: PCRECONFIG = @PCRECONFIG@
249: PCRE_LIB = @PCRE_LIB@
250: PKG_CONFIG = @PKG_CONFIG@
251: PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
252: PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
253: RANLIB = @RANLIB@
254: SED = @SED@
255: SENDFILE_LIB = @SENDFILE_LIB@
256: SET_MAKE = @SET_MAKE@
257: SHELL = @SHELL@
258: SQLITE_CFLAGS = @SQLITE_CFLAGS@
259: SQLITE_LIBS = @SQLITE_LIBS@
260: SSL_LIB = @SSL_LIB@
261: STRIP = @STRIP@
262: UUID_LIBS = @UUID_LIBS@
263: VERSION = @VERSION@
264: XML_CFLAGS = @XML_CFLAGS@
265: XML_LIBS = @XML_LIBS@
266: Z_LIB = @Z_LIB@
267: abs_builddir = @abs_builddir@
268: abs_srcdir = @abs_srcdir@
269: abs_top_builddir = @abs_top_builddir@
270: abs_top_srcdir = @abs_top_srcdir@
271: ac_ct_AR = @ac_ct_AR@
272: ac_ct_CC = @ac_ct_CC@
273: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
274: am__include = @am__include@
275: am__leading_dot = @am__leading_dot@
276: am__quote = @am__quote@
277: am__tar = @am__tar@
278: am__untar = @am__untar@
279: bindir = @bindir@
280: build = @build@
281: build_alias = @build_alias@
282: build_cpu = @build_cpu@
283: build_os = @build_os@
284: build_vendor = @build_vendor@
285: builddir = @builddir@
286: datadir = @datadir@
287: datarootdir = @datarootdir@
288: docdir = @docdir@
289: dvidir = @dvidir@
290: exec_prefix = @exec_prefix@
291: host = @host@
292: host_alias = @host_alias@
293: host_cpu = @host_cpu@
294: host_os = @host_os@
295: host_vendor = @host_vendor@
296: htmldir = @htmldir@
297: includedir = @includedir@
298: infodir = @infodir@
299: install_sh = @install_sh@
300: libdir = @libdir@
301: libexecdir = @libexecdir@
302: localedir = @localedir@
303: localstatedir = @localstatedir@
304: mandir = @mandir@
305: mkdir_p = @mkdir_p@
306: oldincludedir = @oldincludedir@
307: pdfdir = @pdfdir@
308: prefix = @prefix@
309: program_transform_name = @program_transform_name@
310: psdir = @psdir@
311: sbindir = @sbindir@
312: sharedstatedir = @sharedstatedir@
313: srcdir = @srcdir@
314: sysconfdir = @sysconfdir@
315: target = @target@
316: target_alias = @target_alias@
317: target_cpu = @target_cpu@
318: target_os = @target_os@
319: target_vendor = @target_vendor@
320: top_build_prefix = @top_build_prefix@
321: top_builddir = @top_builddir@
322: top_srcdir = @top_srcdir@
323: SUBDIRS = conf.d vhosts.d
324: EXTRA_DIST = lighttpd.conf modules.conf
325: all: all-recursive
326:
327: .SUFFIXES:
328: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
329: @for dep in $?; do \
330: case '$(am__configure_deps)' in \
331: *$$dep*) \
332: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
333: && { if test -f $@; then exit 0; else break; fi; }; \
334: exit 1;; \
335: esac; \
336: done; \
337: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/config/Makefile'; \
338: $(am__cd) $(top_srcdir) && \
339: $(AUTOMAKE) --foreign doc/config/Makefile
340: .PRECIOUS: Makefile
341: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
342: @case '$?' in \
343: *config.status*) \
344: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
345: *) \
346: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
347: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
348: esac;
349:
350: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
351: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
352:
353: $(top_srcdir)/configure: $(am__configure_deps)
354: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
355: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
356: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
357: $(am__aclocal_m4_deps):
358:
359: mostlyclean-libtool:
360: -rm -f *.lo
361:
362: clean-libtool:
363: -rm -rf .libs _libs
364:
365: # This directory's subdirectories are mostly independent; you can cd
366: # into them and run 'make' without going through this Makefile.
367: # To change the values of 'make' variables: instead of editing Makefiles,
368: # (1) if the variable is set in 'config.status', edit 'config.status'
369: # (which will cause the Makefiles to be regenerated when you run 'make');
370: # (2) otherwise, pass the desired values on the 'make' command line.
371: $(am__recursive_targets):
372: @fail=; \
373: if $(am__make_keepgoing); then \
374: failcom='fail=yes'; \
375: else \
376: failcom='exit 1'; \
377: fi; \
378: dot_seen=no; \
379: target=`echo $@ | sed s/-recursive//`; \
380: case "$@" in \
381: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
382: *) list='$(SUBDIRS)' ;; \
383: esac; \
384: for subdir in $$list; do \
385: echo "Making $$target in $$subdir"; \
386: if test "$$subdir" = "."; then \
387: dot_seen=yes; \
388: local_target="$$target-am"; \
389: else \
390: local_target="$$target"; \
391: fi; \
392: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
393: || eval $$failcom; \
394: done; \
395: if test "$$dot_seen" = "no"; then \
396: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
397: fi; test -z "$$fail"
398:
399: ID: $(am__tagged_files)
400: $(am__define_uniq_tagged_files); mkid -fID $$unique
401: tags: tags-recursive
402: TAGS: tags
403:
404: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
405: set x; \
406: here=`pwd`; \
407: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
408: include_option=--etags-include; \
409: empty_fix=.; \
410: else \
411: include_option=--include; \
412: empty_fix=; \
413: fi; \
414: list='$(SUBDIRS)'; for subdir in $$list; do \
415: if test "$$subdir" = .; then :; else \
416: test ! -f $$subdir/TAGS || \
417: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
418: fi; \
419: done; \
420: $(am__define_uniq_tagged_files); \
421: shift; \
422: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
423: test -n "$$unique" || unique=$$empty_fix; \
424: if test $$# -gt 0; then \
425: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
426: "$$@" $$unique; \
427: else \
428: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
429: $$unique; \
430: fi; \
431: fi
432: ctags: ctags-recursive
433:
434: CTAGS: ctags
435: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
436: $(am__define_uniq_tagged_files); \
437: test -z "$(CTAGS_ARGS)$$unique" \
438: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
439: $$unique
440:
441: GTAGS:
442: here=`$(am__cd) $(top_builddir) && pwd` \
443: && $(am__cd) $(top_srcdir) \
444: && gtags -i $(GTAGS_ARGS) "$$here"
445: cscopelist: cscopelist-recursive
446:
447: cscopelist-am: $(am__tagged_files)
448: list='$(am__tagged_files)'; \
449: case "$(srcdir)" in \
450: [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
451: *) sdir=$(subdir)/$(srcdir) ;; \
452: esac; \
453: for i in $$list; do \
454: if test -f "$$i"; then \
455: echo "$(subdir)/$$i"; \
456: else \
457: echo "$$sdir/$$i"; \
458: fi; \
459: done >> $(top_builddir)/cscope.files
460:
461: distclean-tags:
462: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
463:
464: distdir: $(DISTFILES)
465: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
466: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
467: list='$(DISTFILES)'; \
468: dist_files=`for file in $$list; do echo $$file; done | \
469: sed -e "s|^$$srcdirstrip/||;t" \
470: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
471: case $$dist_files in \
472: */*) $(MKDIR_P) `echo "$$dist_files" | \
473: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
474: sort -u` ;; \
475: esac; \
476: for file in $$dist_files; do \
477: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
478: if test -d $$d/$$file; then \
479: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
480: if test -d "$(distdir)/$$file"; then \
481: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
482: fi; \
483: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
484: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
485: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
486: fi; \
487: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
488: else \
489: test -f "$(distdir)/$$file" \
490: || cp -p $$d/$$file "$(distdir)/$$file" \
491: || exit 1; \
492: fi; \
493: done
494: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
495: if test "$$subdir" = .; then :; else \
496: $(am__make_dryrun) \
497: || test -d "$(distdir)/$$subdir" \
498: || $(MKDIR_P) "$(distdir)/$$subdir" \
499: || exit 1; \
500: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
501: $(am__relativize); \
502: new_distdir=$$reldir; \
503: dir1=$$subdir; dir2="$(top_distdir)"; \
504: $(am__relativize); \
505: new_top_distdir=$$reldir; \
506: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
507: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
508: ($(am__cd) $$subdir && \
509: $(MAKE) $(AM_MAKEFLAGS) \
510: top_distdir="$$new_top_distdir" \
511: distdir="$$new_distdir" \
512: am__remove_distdir=: \
513: am__skip_length_check=: \
514: am__skip_mode_fix=: \
515: distdir) \
516: || exit 1; \
517: fi; \
518: done
519: check-am: all-am
520: check: check-recursive
521: all-am: Makefile
522: installdirs: installdirs-recursive
523: installdirs-am:
524: install: install-recursive
525: install-exec: install-exec-recursive
526: install-data: install-data-recursive
527: uninstall: uninstall-recursive
528:
529: install-am: all-am
530: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
531:
532: installcheck: installcheck-recursive
533: install-strip:
534: if test -z '$(STRIP)'; then \
535: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
536: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
537: install; \
538: else \
539: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
540: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
541: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
542: fi
543: mostlyclean-generic:
544:
545: clean-generic:
546:
547: distclean-generic:
548: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
549: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
550:
551: maintainer-clean-generic:
552: @echo "This command is intended for maintainers to use"
553: @echo "it deletes files that may require special tools to rebuild."
554: clean: clean-recursive
555:
556: clean-am: clean-generic clean-libtool mostlyclean-am
557:
558: distclean: distclean-recursive
559: -rm -f Makefile
560: distclean-am: clean-am distclean-generic distclean-tags
561:
562: dvi: dvi-recursive
563:
564: dvi-am:
565:
566: html: html-recursive
567:
568: html-am:
569:
570: info: info-recursive
571:
572: info-am:
573:
574: install-data-am:
575:
576: install-dvi: install-dvi-recursive
577:
578: install-dvi-am:
579:
580: install-exec-am:
581:
582: install-html: install-html-recursive
583:
584: install-html-am:
585:
586: install-info: install-info-recursive
587:
588: install-info-am:
589:
590: install-man:
591:
592: install-pdf: install-pdf-recursive
593:
594: install-pdf-am:
595:
596: install-ps: install-ps-recursive
597:
598: install-ps-am:
599:
600: installcheck-am:
601:
602: maintainer-clean: maintainer-clean-recursive
603: -rm -f Makefile
604: maintainer-clean-am: distclean-am maintainer-clean-generic
605:
606: mostlyclean: mostlyclean-recursive
607:
608: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
609:
610: pdf: pdf-recursive
611:
612: pdf-am:
613:
614: ps: ps-recursive
615:
616: ps-am:
617:
618: uninstall-am:
619:
620: .MAKE: $(am__recursive_targets) install-am install-strip
621:
622: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
623: check-am clean clean-generic clean-libtool cscopelist-am ctags \
624: ctags-am distclean distclean-generic distclean-libtool \
625: distclean-tags distdir dvi dvi-am html html-am info info-am \
626: install install-am install-data install-data-am install-dvi \
627: install-dvi-am install-exec install-exec-am install-html \
628: install-html-am install-info install-info-am install-man \
629: install-pdf install-pdf-am install-ps install-ps-am \
630: install-strip installcheck installcheck-am installdirs \
631: installdirs-am maintainer-clean maintainer-clean-generic \
632: mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
633: ps ps-am tags tags-am uninstall uninstall-am
634:
635:
636: # Tell versions [3.59,3.63) of GNU make to not export all variables.
637: # Otherwise a system limit (for SysV at least) may be exceeded.
638: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / lighttpd / doc / config