Annotation of embedaddon/lighttpd/doc/config/Makefile.in, revision 1.1.1.3
1.1.1.3 ! misho 1: # Makefile.in generated by automake 1.15 from Makefile.am.
1.1 misho 2: # @configure_input@
3:
1.1.1.3 ! misho 4: # Copyright (C) 1994-2014 Free Software Foundation, Inc.
1.1 misho 5:
6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16: VPATH = @srcdir@
1.1.1.3 ! misho 17: am__is_gnu_make = { \
! 18: if test -z '$(MAKELEVEL)'; then \
! 19: false; \
! 20: elif test -n '$(MAKE_HOST)'; then \
! 21: true; \
! 22: elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
! 23: true; \
! 24: else \
! 25: false; \
! 26: fi; \
! 27: }
1.1 misho 28: am__make_running_with_option = \
29: case $${target_option-} in \
30: ?) ;; \
31: *) echo "am__make_running_with_option: internal error: invalid" \
32: "target option '$${target_option-}' specified" >&2; \
33: exit 1;; \
34: esac; \
35: has_opt=no; \
36: sane_makeflags=$$MAKEFLAGS; \
37: if $(am__is_gnu_make); then \
38: sane_makeflags=$$MFLAGS; \
39: else \
40: case $$MAKEFLAGS in \
41: *\\[\ \ ]*) \
42: bs=\\; \
43: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
44: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
45: esac; \
46: fi; \
47: skip_next=no; \
48: strip_trailopt () \
49: { \
50: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
51: }; \
52: for flg in $$sane_makeflags; do \
53: test $$skip_next = yes && { skip_next=no; continue; }; \
54: case $$flg in \
55: *=*|--*) continue;; \
56: -*I) strip_trailopt 'I'; skip_next=yes;; \
57: -*I?*) strip_trailopt 'I';; \
58: -*O) strip_trailopt 'O'; skip_next=yes;; \
59: -*O?*) strip_trailopt 'O';; \
60: -*l) strip_trailopt 'l'; skip_next=yes;; \
61: -*l?*) strip_trailopt 'l';; \
62: -[dEDm]) skip_next=yes;; \
63: -[JT]) skip_next=yes;; \
64: esac; \
65: case $$flg in \
66: *$$target_option*) has_opt=yes; break;; \
67: esac; \
68: done; \
69: test $$has_opt = yes
70: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
71: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
72: pkgdatadir = $(datadir)/@PACKAGE@
73: pkgincludedir = $(includedir)/@PACKAGE@
74: pkglibdir = $(libdir)/@PACKAGE@
75: pkglibexecdir = $(libexecdir)/@PACKAGE@
76: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
77: install_sh_DATA = $(install_sh) -c -m 644
78: install_sh_PROGRAM = $(install_sh) -c
79: install_sh_SCRIPT = $(install_sh) -c
80: INSTALL_HEADER = $(INSTALL_DATA)
81: transform = $(program_transform_name)
82: NORMAL_INSTALL = :
83: PRE_INSTALL = :
84: POST_INSTALL = :
85: NORMAL_UNINSTALL = :
86: PRE_UNINSTALL = :
87: POST_UNINSTALL = :
88: build_triplet = @build@
89: host_triplet = @host@
90: subdir = doc/config
91: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
92: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
93: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
94: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
95: $(top_srcdir)/configure.ac
96: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97: $(ACLOCAL_M4)
1.1.1.3 ! misho 98: DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
1.1 misho 99: mkinstalldirs = $(install_sh) -d
100: CONFIG_HEADER = $(top_builddir)/config.h
101: CONFIG_CLEAN_FILES =
102: CONFIG_CLEAN_VPATH_FILES =
103: AM_V_P = $(am__v_P_@AM_V@)
104: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
105: am__v_P_0 = false
106: am__v_P_1 = :
107: AM_V_GEN = $(am__v_GEN_@AM_V@)
108: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
109: am__v_GEN_0 = @echo " GEN " $@;
110: am__v_GEN_1 =
111: AM_V_at = $(am__v_at_@AM_V@)
112: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
113: am__v_at_0 = @
114: am__v_at_1 =
115: SOURCES =
116: DIST_SOURCES =
117: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
118: ctags-recursive dvi-recursive html-recursive info-recursive \
119: install-data-recursive install-dvi-recursive \
120: install-exec-recursive install-html-recursive \
121: install-info-recursive install-pdf-recursive \
122: install-ps-recursive install-recursive installcheck-recursive \
123: installdirs-recursive pdf-recursive ps-recursive \
124: tags-recursive uninstall-recursive
125: am__can_run_installinfo = \
126: case $$AM_UPDATE_INFO_DIR in \
127: n|no|NO) false;; \
128: *) (install-info --version) >/dev/null 2>&1;; \
129: esac
130: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
131: distclean-recursive maintainer-clean-recursive
132: am__recursive_targets = \
133: $(RECURSIVE_TARGETS) \
134: $(RECURSIVE_CLEAN_TARGETS) \
135: $(am__extra_recursive_targets)
136: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
137: distdir
138: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
139: # Read a list of newline-separated strings from the standard input,
140: # and print each of them once, without duplicates. Input order is
141: # *not* preserved.
142: am__uniquify_input = $(AWK) '\
143: BEGIN { nonempty = 0; } \
144: { items[$$0] = 1; nonempty = 1; } \
145: END { if (nonempty) { for (i in items) print i; }; } \
146: '
147: # Make sure the list of sources is unique. This is necessary because,
148: # e.g., the same source file might be shared among _SOURCES variables
149: # for different programs/libraries.
150: am__define_uniq_tagged_files = \
151: list='$(am__tagged_files)'; \
152: unique=`for i in $$list; do \
153: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
154: done | $(am__uniquify_input)`
155: ETAGS = etags
156: CTAGS = ctags
157: DIST_SUBDIRS = $(SUBDIRS)
1.1.1.3 ! misho 158: am__DIST_COMMON = $(srcdir)/Makefile.in
1.1 misho 159: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
160: am__relativize = \
161: dir0=`pwd`; \
162: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
163: sed_rest='s,^[^/]*/*,,'; \
164: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
165: sed_butlast='s,/*[^/]*$$,,'; \
166: while test -n "$$dir1"; do \
167: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
168: if test "$$first" != "."; then \
169: if test "$$first" = ".."; then \
170: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
171: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
172: else \
173: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
174: if test "$$first2" = "$$first"; then \
175: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
176: else \
177: dir2="../$$dir2"; \
178: fi; \
179: dir0="$$dir0"/"$$first"; \
180: fi; \
181: fi; \
182: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
183: done; \
184: reldir="$$dir2"
185: ACLOCAL = @ACLOCAL@
186: AMTAR = @AMTAR@
187: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
188: AR = @AR@
189: ATTR_LIB = @ATTR_LIB@
190: AUTOCONF = @AUTOCONF@
191: AUTOHEADER = @AUTOHEADER@
192: AUTOMAKE = @AUTOMAKE@
193: AWK = @AWK@
194: BZ_LIB = @BZ_LIB@
195: CC = @CC@
196: CCDEPMODE = @CCDEPMODE@
197: CFLAGS = @CFLAGS@
198: CPP = @CPP@
199: CPPFLAGS = @CPPFLAGS@
200: CRYPT_LIB = @CRYPT_LIB@
201: CYGPATH_W = @CYGPATH_W@
202: DEFS = @DEFS@
203: DEPDIR = @DEPDIR@
204: DLLTOOL = @DLLTOOL@
205: DL_LIB = @DL_LIB@
206: DSYMUTIL = @DSYMUTIL@
207: DUMPBIN = @DUMPBIN@
208: ECHO_C = @ECHO_C@
209: ECHO_N = @ECHO_N@
210: ECHO_T = @ECHO_T@
211: EGREP = @EGREP@
212: EXEEXT = @EXEEXT@
213: FAM_CFLAGS = @FAM_CFLAGS@
214: FAM_LIBS = @FAM_LIBS@
215: FGREP = @FGREP@
216: GDBM_LIB = @GDBM_LIB@
217: GREP = @GREP@
218: INSTALL = @INSTALL@
219: INSTALL_DATA = @INSTALL_DATA@
220: INSTALL_PROGRAM = @INSTALL_PROGRAM@
221: INSTALL_SCRIPT = @INSTALL_SCRIPT@
222: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
223: LBER_LIB = @LBER_LIB@
224: LD = @LD@
225: LDAP_LIB = @LDAP_LIB@
226: LDFLAGS = @LDFLAGS@
227: LIBEV_CFLAGS = @LIBEV_CFLAGS@
228: LIBEV_LIBS = @LIBEV_LIBS@
229: LIBOBJS = @LIBOBJS@
230: LIBS = @LIBS@
231: LIBTOOL = @LIBTOOL@
1.1.1.3 ! misho 232: LIBUNWIND_CFLAGS = @LIBUNWIND_CFLAGS@
! 233: LIBUNWIND_LIBS = @LIBUNWIND_LIBS@
1.1 misho 234: LIPO = @LIPO@
235: LN_S = @LN_S@
236: LTLIBOBJS = @LTLIBOBJS@
1.1.1.3 ! misho 237: LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
1.1 misho 238: LUA_CFLAGS = @LUA_CFLAGS@
239: LUA_LIBS = @LUA_LIBS@
240: MAKEINFO = @MAKEINFO@
241: MANIFEST_TOOL = @MANIFEST_TOOL@
1.1.1.3 ! misho 242: MEMCACHED_LIB = @MEMCACHED_LIB@
1.1 misho 243: MKDIR_P = @MKDIR_P@
244: MYSQL_CONFIG = @MYSQL_CONFIG@
245: MYSQL_INCLUDE = @MYSQL_INCLUDE@
246: MYSQL_LIBS = @MYSQL_LIBS@
247: NM = @NM@
248: NMEDIT = @NMEDIT@
249: OBJDUMP = @OBJDUMP@
250: OBJEXT = @OBJEXT@
251: OTOOL = @OTOOL@
252: OTOOL64 = @OTOOL64@
253: PACKAGE = @PACKAGE@
254: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
255: PACKAGE_NAME = @PACKAGE_NAME@
256: PACKAGE_STRING = @PACKAGE_STRING@
257: PACKAGE_TARNAME = @PACKAGE_TARNAME@
258: PACKAGE_URL = @PACKAGE_URL@
259: PACKAGE_VERSION = @PACKAGE_VERSION@
260: PATH_SEPARATOR = @PATH_SEPARATOR@
261: PCRECONFIG = @PCRECONFIG@
262: PCRE_LIB = @PCRE_LIB@
263: PKG_CONFIG = @PKG_CONFIG@
264: PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
265: PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
266: RANLIB = @RANLIB@
267: SED = @SED@
268: SENDFILE_LIB = @SENDFILE_LIB@
269: SET_MAKE = @SET_MAKE@
270: SHELL = @SHELL@
271: SQLITE_CFLAGS = @SQLITE_CFLAGS@
272: SQLITE_LIBS = @SQLITE_LIBS@
273: SSL_LIB = @SSL_LIB@
274: STRIP = @STRIP@
275: UUID_LIBS = @UUID_LIBS@
276: VERSION = @VERSION@
277: XML_CFLAGS = @XML_CFLAGS@
278: XML_LIBS = @XML_LIBS@
279: Z_LIB = @Z_LIB@
280: abs_builddir = @abs_builddir@
281: abs_srcdir = @abs_srcdir@
282: abs_top_builddir = @abs_top_builddir@
283: abs_top_srcdir = @abs_top_srcdir@
284: ac_ct_AR = @ac_ct_AR@
285: ac_ct_CC = @ac_ct_CC@
286: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
287: am__include = @am__include@
288: am__leading_dot = @am__leading_dot@
289: am__quote = @am__quote@
290: am__tar = @am__tar@
291: am__untar = @am__untar@
292: bindir = @bindir@
293: build = @build@
294: build_alias = @build_alias@
295: build_cpu = @build_cpu@
296: build_os = @build_os@
297: build_vendor = @build_vendor@
298: builddir = @builddir@
299: datadir = @datadir@
300: datarootdir = @datarootdir@
301: docdir = @docdir@
302: dvidir = @dvidir@
303: exec_prefix = @exec_prefix@
304: host = @host@
305: host_alias = @host_alias@
306: host_cpu = @host_cpu@
307: host_os = @host_os@
308: host_vendor = @host_vendor@
309: htmldir = @htmldir@
310: includedir = @includedir@
311: infodir = @infodir@
312: install_sh = @install_sh@
313: libdir = @libdir@
314: libexecdir = @libexecdir@
315: localedir = @localedir@
316: localstatedir = @localstatedir@
317: mandir = @mandir@
318: mkdir_p = @mkdir_p@
319: oldincludedir = @oldincludedir@
320: pdfdir = @pdfdir@
321: prefix = @prefix@
322: program_transform_name = @program_transform_name@
323: psdir = @psdir@
324: sbindir = @sbindir@
325: sharedstatedir = @sharedstatedir@
326: srcdir = @srcdir@
327: sysconfdir = @sysconfdir@
328: target_alias = @target_alias@
329: top_build_prefix = @top_build_prefix@
330: top_builddir = @top_builddir@
331: top_srcdir = @top_srcdir@
332: SUBDIRS = conf.d vhosts.d
333: EXTRA_DIST = lighttpd.conf modules.conf
334: all: all-recursive
335:
336: .SUFFIXES:
337: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
338: @for dep in $?; do \
339: case '$(am__configure_deps)' in \
340: *$$dep*) \
341: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
342: && { if test -f $@; then exit 0; else break; fi; }; \
343: exit 1;; \
344: esac; \
345: done; \
346: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/config/Makefile'; \
347: $(am__cd) $(top_srcdir) && \
348: $(AUTOMAKE) --foreign doc/config/Makefile
349: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
350: @case '$?' in \
351: *config.status*) \
352: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
353: *) \
354: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
355: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
356: esac;
357:
358: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
359: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
360:
361: $(top_srcdir)/configure: $(am__configure_deps)
362: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
363: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
364: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
365: $(am__aclocal_m4_deps):
366:
367: mostlyclean-libtool:
368: -rm -f *.lo
369:
370: clean-libtool:
371: -rm -rf .libs _libs
372:
373: # This directory's subdirectories are mostly independent; you can cd
374: # into them and run 'make' without going through this Makefile.
375: # To change the values of 'make' variables: instead of editing Makefiles,
376: # (1) if the variable is set in 'config.status', edit 'config.status'
377: # (which will cause the Makefiles to be regenerated when you run 'make');
378: # (2) otherwise, pass the desired values on the 'make' command line.
379: $(am__recursive_targets):
380: @fail=; \
381: if $(am__make_keepgoing); then \
382: failcom='fail=yes'; \
383: else \
384: failcom='exit 1'; \
385: fi; \
386: dot_seen=no; \
387: target=`echo $@ | sed s/-recursive//`; \
388: case "$@" in \
389: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
390: *) list='$(SUBDIRS)' ;; \
391: esac; \
392: for subdir in $$list; do \
393: echo "Making $$target in $$subdir"; \
394: if test "$$subdir" = "."; then \
395: dot_seen=yes; \
396: local_target="$$target-am"; \
397: else \
398: local_target="$$target"; \
399: fi; \
400: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
401: || eval $$failcom; \
402: done; \
403: if test "$$dot_seen" = "no"; then \
404: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
405: fi; test -z "$$fail"
406:
407: ID: $(am__tagged_files)
408: $(am__define_uniq_tagged_files); mkid -fID $$unique
409: tags: tags-recursive
410: TAGS: tags
411:
412: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
413: set x; \
414: here=`pwd`; \
415: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
416: include_option=--etags-include; \
417: empty_fix=.; \
418: else \
419: include_option=--include; \
420: empty_fix=; \
421: fi; \
422: list='$(SUBDIRS)'; for subdir in $$list; do \
423: if test "$$subdir" = .; then :; else \
424: test ! -f $$subdir/TAGS || \
425: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
426: fi; \
427: done; \
428: $(am__define_uniq_tagged_files); \
429: shift; \
430: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
431: test -n "$$unique" || unique=$$empty_fix; \
432: if test $$# -gt 0; then \
433: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
434: "$$@" $$unique; \
435: else \
436: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
437: $$unique; \
438: fi; \
439: fi
440: ctags: ctags-recursive
441:
442: CTAGS: ctags
443: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
444: $(am__define_uniq_tagged_files); \
445: test -z "$(CTAGS_ARGS)$$unique" \
446: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
447: $$unique
448:
449: GTAGS:
450: here=`$(am__cd) $(top_builddir) && pwd` \
451: && $(am__cd) $(top_srcdir) \
452: && gtags -i $(GTAGS_ARGS) "$$here"
453: cscopelist: cscopelist-recursive
454:
455: cscopelist-am: $(am__tagged_files)
456: list='$(am__tagged_files)'; \
457: case "$(srcdir)" in \
458: [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
459: *) sdir=$(subdir)/$(srcdir) ;; \
460: esac; \
461: for i in $$list; do \
462: if test -f "$$i"; then \
463: echo "$(subdir)/$$i"; \
464: else \
465: echo "$$sdir/$$i"; \
466: fi; \
467: done >> $(top_builddir)/cscope.files
468:
469: distclean-tags:
470: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
471:
472: distdir: $(DISTFILES)
473: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
474: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
475: list='$(DISTFILES)'; \
476: dist_files=`for file in $$list; do echo $$file; done | \
477: sed -e "s|^$$srcdirstrip/||;t" \
478: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
479: case $$dist_files in \
480: */*) $(MKDIR_P) `echo "$$dist_files" | \
481: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
482: sort -u` ;; \
483: esac; \
484: for file in $$dist_files; do \
485: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
486: if test -d $$d/$$file; then \
487: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
488: if test -d "$(distdir)/$$file"; then \
489: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
490: fi; \
491: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
492: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
493: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
494: fi; \
495: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
496: else \
497: test -f "$(distdir)/$$file" \
498: || cp -p $$d/$$file "$(distdir)/$$file" \
499: || exit 1; \
500: fi; \
501: done
502: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
503: if test "$$subdir" = .; then :; else \
504: $(am__make_dryrun) \
505: || test -d "$(distdir)/$$subdir" \
506: || $(MKDIR_P) "$(distdir)/$$subdir" \
507: || exit 1; \
508: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
509: $(am__relativize); \
510: new_distdir=$$reldir; \
511: dir1=$$subdir; dir2="$(top_distdir)"; \
512: $(am__relativize); \
513: new_top_distdir=$$reldir; \
514: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
515: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
516: ($(am__cd) $$subdir && \
517: $(MAKE) $(AM_MAKEFLAGS) \
518: top_distdir="$$new_top_distdir" \
519: distdir="$$new_distdir" \
520: am__remove_distdir=: \
521: am__skip_length_check=: \
522: am__skip_mode_fix=: \
523: distdir) \
524: || exit 1; \
525: fi; \
526: done
527: check-am: all-am
528: check: check-recursive
529: all-am: Makefile
530: installdirs: installdirs-recursive
531: installdirs-am:
532: install: install-recursive
533: install-exec: install-exec-recursive
534: install-data: install-data-recursive
535: uninstall: uninstall-recursive
536:
537: install-am: all-am
538: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
539:
540: installcheck: installcheck-recursive
541: install-strip:
542: if test -z '$(STRIP)'; then \
543: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
544: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
545: install; \
546: else \
547: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
548: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
549: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
550: fi
551: mostlyclean-generic:
552:
553: clean-generic:
554:
555: distclean-generic:
556: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
557: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
558:
559: maintainer-clean-generic:
560: @echo "This command is intended for maintainers to use"
561: @echo "it deletes files that may require special tools to rebuild."
562: clean: clean-recursive
563:
564: clean-am: clean-generic clean-libtool mostlyclean-am
565:
566: distclean: distclean-recursive
567: -rm -f Makefile
568: distclean-am: clean-am distclean-generic distclean-tags
569:
570: dvi: dvi-recursive
571:
572: dvi-am:
573:
574: html: html-recursive
575:
576: html-am:
577:
578: info: info-recursive
579:
580: info-am:
581:
582: install-data-am:
583:
584: install-dvi: install-dvi-recursive
585:
586: install-dvi-am:
587:
588: install-exec-am:
589:
590: install-html: install-html-recursive
591:
592: install-html-am:
593:
594: install-info: install-info-recursive
595:
596: install-info-am:
597:
598: install-man:
599:
600: install-pdf: install-pdf-recursive
601:
602: install-pdf-am:
603:
604: install-ps: install-ps-recursive
605:
606: install-ps-am:
607:
608: installcheck-am:
609:
610: maintainer-clean: maintainer-clean-recursive
611: -rm -f Makefile
612: maintainer-clean-am: distclean-am maintainer-clean-generic
613:
614: mostlyclean: mostlyclean-recursive
615:
616: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
617:
618: pdf: pdf-recursive
619:
620: pdf-am:
621:
622: ps: ps-recursive
623:
624: ps-am:
625:
626: uninstall-am:
627:
628: .MAKE: $(am__recursive_targets) install-am install-strip
629:
630: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
631: check-am clean clean-generic clean-libtool cscopelist-am ctags \
632: ctags-am distclean distclean-generic distclean-libtool \
633: distclean-tags distdir dvi dvi-am html html-am info info-am \
634: install install-am install-data install-data-am install-dvi \
635: install-dvi-am install-exec install-exec-am install-html \
636: install-html-am install-info install-info-am install-man \
637: install-pdf install-pdf-am install-ps install-ps-am \
638: install-strip installcheck installcheck-am installdirs \
639: installdirs-am maintainer-clean maintainer-clean-generic \
640: mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
641: ps ps-am tags tags-am uninstall uninstall-am
1.1.1.3 ! misho 642:
! 643: .PRECIOUS: Makefile
1.1 misho 644:
645:
646: # Tell versions [3.59,3.63) of GNU make to not export all variables.
647: # Otherwise a system limit (for SysV at least) may be exceeded.
648: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / lighttpd / doc / config