Return to rc.lighttpd CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / lighttpd / doc / initscripts

1.4.33

    1: #! /bin/sh
    2: # Copyright (c) 1995-2002 SuSE Linux AG, Nuernberg, Germany.
    3: # All rights reserved.
    4: #
    5: # Author: Kurt Garloff <feedback@suse.de>
    6: #
    7: # /etc/init.d/FOO
    8: #
    9: #   and symbolic its link
   10: #
   11: # /(usr/)sbin/rcFOO
   12: #
   13: # LSB compliant service control script; see http://www.linuxbase.org/spec/
   14: #
   15: # System startup script for some example service or daemon FOO (template)
   16: #
   17: ### BEGIN INIT INFO
   18: # Provides: FOO
   19: # Required-Start: $remote_fs $syslog
   20: # Required-Stop:  $remote_fs $syslog
   21: # Default-Start:  3 5
   22: # Default-Stop:   0 1 2 6
   23: # Description:    Start FOO to allow XY and provide YZ
   24: #	continued on second line by '#<TAB>'
   25: ### END INIT INFO
   26: #
   27: # Note on Required-Start: It does specify the init script ordering,
   28: # not real dependencies. Depencies have to be handled by admin
   29: # resp. the configuration tools (s)he uses.
   30: 
   31: # Source SuSE config (if still necessary, most info has been moved)
   32: test -r /etc/rc.config && . /etc/rc.config
   33: 
   34: # Check for missing binaries (stale symlinks should not happen)
   35: LIGHTTPD_BIN=/usr/sbin/lighttpd
   36: test -x $LIGHTTPD_BIN || exit 5
   37: 
   38: # Check for existence of needed config file and read it
   39: LIGHTTPD_CONFIG=/etc/sysconfig/lighttpd
   40: test -r $LIGHTTPD_CONFIG || exit 6
   41: . $LIGHTTPD_CONFIG
   42: 
   43: # Shell functions sourced from /etc/rc.status:
   44: #      rc_check         check and set local and overall rc status
   45: #      rc_status        check and set local and overall rc status
   46: #      rc_status -v     ditto but be verbose in local rc status
   47: #      rc_status -v -r  ditto and clear the local rc status
   48: #      rc_failed        set local and overall rc status to failed
   49: #      rc_failed <num>  set local and overall rc status to <num><num>
   50: #      rc_reset         clear local rc status (overall remains)
   51: #      rc_exit          exit appropriate to overall rc status
   52: #      rc_active	checks whether a service is activated by symlinks
   53: . /etc/rc.status
   54: 
   55: # First reset status of this service
   56: rc_reset
   57: 
   58: # Return values acc. to LSB for all commands but status:
   59: # 0 - success
   60: # 1 - generic or unspecified error
   61: # 2 - invalid or excess argument(s)
   62: # 3 - unimplemented feature (e.g. "reload")
   63: # 4 - insufficient privilege
   64: # 5 - program is not installed
   65: # 6 - program is not configured
   66: # 7 - program is not running
   67: #
   68: # Note that starting an already running service, stopping
   69: # or restarting a not-running service as well as the restart
   70: # with force-reload (in case signalling is not supported) are
   71: # considered a success.
   72: 
   73: case "$1" in
   74:     start)
   75: 	echo -n "Starting lighttpd"
   76: 	## Start daemon with startproc(8). If this fails
   77: 	## the echo return value is set appropriate.
   78: 
   79: 	# NOTE: startproc returns 0, even if service is
   80: 	# already running to match LSB spec.
   81: 	startproc $LIGHTTPD_BIN -f $LIGHTTPD_CONF_PATH
   82: 
   83: 	# Remember status and be verbose
   84: 	rc_status -v
   85: 	;;
   86:     stop)
   87: 	echo -n "Shutting down lighttpd"
   88: 	## Stop daemon with killproc(8) and if this fails
   89: 	## set echo the echo return value.
   90: 
   91: 	killproc -TERM $LIGHTTPD_BIN
   92: 
   93: 	# Remember status and be verbose
   94: 	rc_status -v
   95: 	;;
   96:     try-restart)
   97: 	## Stop the service and if this succeeds (i.e. the
   98: 	## service was running before), start it again.
   99: 	## Note: try-restart is not (yet) part of LSB (as of 0.7.5)
  100: 	$0 status >/dev/null &&  $0 restart
  101: 
  102: 	# Remember status and be quiet
  103: 	rc_status
  104: 	;;
  105:     restart)
  106: 	## Stop the service and regardless of whether it was
  107: 	## running or not, start it again.
  108: 	$0 stop
  109: 	$0 start
  110: 
  111: 	# Remember status and be quiet
  112: 	rc_status
  113: 	;;
  114:     force-reload|reload)
  115: 	## Like force-reload, but if daemon does not support
  116: 	## signalling, do nothing (!)
  117: 
  118: 	# If it supports signalling:
  119: 	echo -n "Reload service LIGHTTPD"
  120: 	killproc -INT $LIGHTTPD_BIN
  121: 	$0 start
  122: 	touch /var/run/lighttpd.pid
  123: 	rc_status -v
  124: 
  125: 	## Otherwise if it does not support reload:
  126: 	#rc_failed 3
  127: 	#rc_status -v
  128: 	;;
  129:     status)
  130: 	echo -n "Checking for service LIGHTTPD: "
  131: 	## Check status with checkproc(8), if process is running
  132: 	## checkproc will return with exit status 0.
  133: 
  134: 	# Return value is slightly different for the status command:
  135: 	# 0 - service running
  136: 	# 1 - service dead, but /var/run/  pid  file exists
  137: 	# 2 - service dead, but /var/lock/ lock file exists
  138: 	# 3 - service not running
  139: 
  140: 	# NOTE: checkproc returns LSB compliant status values.
  141: 	checkproc $LIGHTTPD_BIN
  142: 	rc_status -v
  143: 	;;
  144:     probe)
  145: 	## Optional: Probe for the necessity of a reload,
  146: 	## print out the argument which is required for a reload.
  147: 
  148: 	test /etc/lighttpd/lighttpd.conf -nt /var/run/lighttpd.pid && echo reload
  149: 	;;
  150:     *)
  151: 	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
  152: 	exit 1
  153: 	;;
  154: esac
  155: rc_exit