Annotation of embedaddon/lighttpd/doc/outdated/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.14 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994-2013 Free Software Foundation, Inc.
! 5:
! 6: # This Makefile.in is free software; the Free Software Foundation
! 7: # gives unlimited permission to copy and/or distribute it,
! 8: # with or without modifications, as long as this notice is preserved.
! 9:
! 10: # This program is distributed in the hope that it will be useful,
! 11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 13: # PARTICULAR PURPOSE.
! 14:
! 15: @SET_MAKE@
! 16: VPATH = @srcdir@
! 17: am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
! 18: am__make_running_with_option = \
! 19: case $${target_option-} in \
! 20: ?) ;; \
! 21: *) echo "am__make_running_with_option: internal error: invalid" \
! 22: "target option '$${target_option-}' specified" >&2; \
! 23: exit 1;; \
! 24: esac; \
! 25: has_opt=no; \
! 26: sane_makeflags=$$MAKEFLAGS; \
! 27: if $(am__is_gnu_make); then \
! 28: sane_makeflags=$$MFLAGS; \
! 29: else \
! 30: case $$MAKEFLAGS in \
! 31: *\\[\ \ ]*) \
! 32: bs=\\; \
! 33: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
! 34: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
! 35: esac; \
! 36: fi; \
! 37: skip_next=no; \
! 38: strip_trailopt () \
! 39: { \
! 40: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
! 41: }; \
! 42: for flg in $$sane_makeflags; do \
! 43: test $$skip_next = yes && { skip_next=no; continue; }; \
! 44: case $$flg in \
! 45: *=*|--*) continue;; \
! 46: -*I) strip_trailopt 'I'; skip_next=yes;; \
! 47: -*I?*) strip_trailopt 'I';; \
! 48: -*O) strip_trailopt 'O'; skip_next=yes;; \
! 49: -*O?*) strip_trailopt 'O';; \
! 50: -*l) strip_trailopt 'l'; skip_next=yes;; \
! 51: -*l?*) strip_trailopt 'l';; \
! 52: -[dEDm]) skip_next=yes;; \
! 53: -[JT]) skip_next=yes;; \
! 54: esac; \
! 55: case $$flg in \
! 56: *$$target_option*) has_opt=yes; break;; \
! 57: esac; \
! 58: done; \
! 59: test $$has_opt = yes
! 60: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
! 61: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
! 62: pkgdatadir = $(datadir)/@PACKAGE@
! 63: pkgincludedir = $(includedir)/@PACKAGE@
! 64: pkglibdir = $(libdir)/@PACKAGE@
! 65: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 66: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 67: install_sh_DATA = $(install_sh) -c -m 644
! 68: install_sh_PROGRAM = $(install_sh) -c
! 69: install_sh_SCRIPT = $(install_sh) -c
! 70: INSTALL_HEADER = $(INSTALL_DATA)
! 71: transform = $(program_transform_name)
! 72: NORMAL_INSTALL = :
! 73: PRE_INSTALL = :
! 74: POST_INSTALL = :
! 75: NORMAL_UNINSTALL = :
! 76: PRE_UNINSTALL = :
! 77: POST_UNINSTALL = :
! 78: build_triplet = @build@
! 79: host_triplet = @host@
! 80: target_triplet = @target@
! 81: subdir = doc/outdated
! 82: DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
! 83: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 84: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
! 85: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
! 86: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
! 87: $(top_srcdir)/configure.ac
! 88: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 89: $(ACLOCAL_M4)
! 90: mkinstalldirs = $(install_sh) -d
! 91: CONFIG_HEADER = $(top_builddir)/config.h
! 92: CONFIG_CLEAN_FILES =
! 93: CONFIG_CLEAN_VPATH_FILES =
! 94: AM_V_P = $(am__v_P_@AM_V@)
! 95: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
! 96: am__v_P_0 = false
! 97: am__v_P_1 = :
! 98: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 99: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
! 100: am__v_GEN_0 = @echo " GEN " $@;
! 101: am__v_GEN_1 =
! 102: AM_V_at = $(am__v_at_@AM_V@)
! 103: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
! 104: am__v_at_0 = @
! 105: am__v_at_1 =
! 106: SOURCES =
! 107: DIST_SOURCES =
! 108: am__can_run_installinfo = \
! 109: case $$AM_UPDATE_INFO_DIR in \
! 110: n|no|NO) false;; \
! 111: *) (install-info --version) >/dev/null 2>&1;; \
! 112: esac
! 113: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
! 114: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 115: ACLOCAL = @ACLOCAL@
! 116: AMTAR = @AMTAR@
! 117: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
! 118: AR = @AR@
! 119: ATTR_LIB = @ATTR_LIB@
! 120: AUTOCONF = @AUTOCONF@
! 121: AUTOHEADER = @AUTOHEADER@
! 122: AUTOMAKE = @AUTOMAKE@
! 123: AWK = @AWK@
! 124: BZ_LIB = @BZ_LIB@
! 125: CC = @CC@
! 126: CCDEPMODE = @CCDEPMODE@
! 127: CFLAGS = @CFLAGS@
! 128: CPP = @CPP@
! 129: CPPFLAGS = @CPPFLAGS@
! 130: CRYPT_LIB = @CRYPT_LIB@
! 131: CYGPATH_W = @CYGPATH_W@
! 132: DEFS = @DEFS@
! 133: DEPDIR = @DEPDIR@
! 134: DLLTOOL = @DLLTOOL@
! 135: DL_LIB = @DL_LIB@
! 136: DSYMUTIL = @DSYMUTIL@
! 137: DUMPBIN = @DUMPBIN@
! 138: ECHO_C = @ECHO_C@
! 139: ECHO_N = @ECHO_N@
! 140: ECHO_T = @ECHO_T@
! 141: EGREP = @EGREP@
! 142: EXEEXT = @EXEEXT@
! 143: FAM_CFLAGS = @FAM_CFLAGS@
! 144: FAM_LIBS = @FAM_LIBS@
! 145: FGREP = @FGREP@
! 146: GDBM_LIB = @GDBM_LIB@
! 147: GREP = @GREP@
! 148: INSTALL = @INSTALL@
! 149: INSTALL_DATA = @INSTALL_DATA@
! 150: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 151: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 152: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 153: LBER_LIB = @LBER_LIB@
! 154: LD = @LD@
! 155: LDAP_LIB = @LDAP_LIB@
! 156: LDFLAGS = @LDFLAGS@
! 157: LIBEV_CFLAGS = @LIBEV_CFLAGS@
! 158: LIBEV_LIBS = @LIBEV_LIBS@
! 159: LIBOBJS = @LIBOBJS@
! 160: LIBS = @LIBS@
! 161: LIBTOOL = @LIBTOOL@
! 162: LIPO = @LIPO@
! 163: LN_S = @LN_S@
! 164: LTLIBOBJS = @LTLIBOBJS@
! 165: LUA_CFLAGS = @LUA_CFLAGS@
! 166: LUA_LIBS = @LUA_LIBS@
! 167: MAKEINFO = @MAKEINFO@
! 168: MANIFEST_TOOL = @MANIFEST_TOOL@
! 169: MEMCACHE_LIB = @MEMCACHE_LIB@
! 170: MKDIR_P = @MKDIR_P@
! 171: MYSQL_CONFIG = @MYSQL_CONFIG@
! 172: MYSQL_INCLUDE = @MYSQL_INCLUDE@
! 173: MYSQL_LIBS = @MYSQL_LIBS@
! 174: NM = @NM@
! 175: NMEDIT = @NMEDIT@
! 176: OBJDUMP = @OBJDUMP@
! 177: OBJEXT = @OBJEXT@
! 178: OTOOL = @OTOOL@
! 179: OTOOL64 = @OTOOL64@
! 180: PACKAGE = @PACKAGE@
! 181: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 182: PACKAGE_NAME = @PACKAGE_NAME@
! 183: PACKAGE_STRING = @PACKAGE_STRING@
! 184: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 185: PACKAGE_URL = @PACKAGE_URL@
! 186: PACKAGE_VERSION = @PACKAGE_VERSION@
! 187: PATH_SEPARATOR = @PATH_SEPARATOR@
! 188: PCRECONFIG = @PCRECONFIG@
! 189: PCRE_LIB = @PCRE_LIB@
! 190: PKG_CONFIG = @PKG_CONFIG@
! 191: PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
! 192: PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
! 193: RANLIB = @RANLIB@
! 194: SED = @SED@
! 195: SENDFILE_LIB = @SENDFILE_LIB@
! 196: SET_MAKE = @SET_MAKE@
! 197: SHELL = @SHELL@
! 198: SQLITE_CFLAGS = @SQLITE_CFLAGS@
! 199: SQLITE_LIBS = @SQLITE_LIBS@
! 200: SSL_LIB = @SSL_LIB@
! 201: STRIP = @STRIP@
! 202: UUID_LIBS = @UUID_LIBS@
! 203: VERSION = @VERSION@
! 204: XML_CFLAGS = @XML_CFLAGS@
! 205: XML_LIBS = @XML_LIBS@
! 206: Z_LIB = @Z_LIB@
! 207: abs_builddir = @abs_builddir@
! 208: abs_srcdir = @abs_srcdir@
! 209: abs_top_builddir = @abs_top_builddir@
! 210: abs_top_srcdir = @abs_top_srcdir@
! 211: ac_ct_AR = @ac_ct_AR@
! 212: ac_ct_CC = @ac_ct_CC@
! 213: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 214: am__include = @am__include@
! 215: am__leading_dot = @am__leading_dot@
! 216: am__quote = @am__quote@
! 217: am__tar = @am__tar@
! 218: am__untar = @am__untar@
! 219: bindir = @bindir@
! 220: build = @build@
! 221: build_alias = @build_alias@
! 222: build_cpu = @build_cpu@
! 223: build_os = @build_os@
! 224: build_vendor = @build_vendor@
! 225: builddir = @builddir@
! 226: datadir = @datadir@
! 227: datarootdir = @datarootdir@
! 228: docdir = @docdir@
! 229: dvidir = @dvidir@
! 230: exec_prefix = @exec_prefix@
! 231: host = @host@
! 232: host_alias = @host_alias@
! 233: host_cpu = @host_cpu@
! 234: host_os = @host_os@
! 235: host_vendor = @host_vendor@
! 236: htmldir = @htmldir@
! 237: includedir = @includedir@
! 238: infodir = @infodir@
! 239: install_sh = @install_sh@
! 240: libdir = @libdir@
! 241: libexecdir = @libexecdir@
! 242: localedir = @localedir@
! 243: localstatedir = @localstatedir@
! 244: mandir = @mandir@
! 245: mkdir_p = @mkdir_p@
! 246: oldincludedir = @oldincludedir@
! 247: pdfdir = @pdfdir@
! 248: prefix = @prefix@
! 249: program_transform_name = @program_transform_name@
! 250: psdir = @psdir@
! 251: sbindir = @sbindir@
! 252: sharedstatedir = @sharedstatedir@
! 253: srcdir = @srcdir@
! 254: sysconfdir = @sysconfdir@
! 255: target = @target@
! 256: target_alias = @target_alias@
! 257: target_cpu = @target_cpu@
! 258: target_os = @target_os@
! 259: target_vendor = @target_vendor@
! 260: top_build_prefix = @top_build_prefix@
! 261: top_builddir = @top_builddir@
! 262: top_srcdir = @top_srcdir@
! 263: DOCS = accesslog.txt \
! 264: authentication.txt \
! 265: cgi.txt \
! 266: compress.txt \
! 267: configuration.txt \
! 268: extforward.txt \
! 269: fastcgi-state.txt \
! 270: fastcgi.txt \
! 271: features.txt \
! 272: performance.txt \
! 273: plugins.txt \
! 274: proxy.txt \
! 275: redirect.txt \
! 276: rewrite.txt \
! 277: secdownload.txt \
! 278: security.txt \
! 279: simple-vhost.txt \
! 280: skeleton.txt \
! 281: ssi.txt \
! 282: ssl.txt \
! 283: state.txt \
! 284: rrdtool.txt \
! 285: alias.txt \
! 286: userdir.txt \
! 287: mysqlvhost.txt \
! 288: access.txt \
! 289: traffic-shaping.txt \
! 290: setenv.txt \
! 291: status.txt \
! 292: scgi.txt \
! 293: cml.txt \
! 294: trigger_b4_dl.txt \
! 295: webdav.txt \
! 296: expire.txt \
! 297: dirlisting.txt \
! 298: evhost.txt \
! 299: magnet.txt
! 300:
! 301: HTMLDOCS = accesslog.html \
! 302: authentication.html \
! 303: cgi.html \
! 304: compress.html \
! 305: configuration.html \
! 306: extforward.html \
! 307: fastcgi-state.html \
! 308: fastcgi.html \
! 309: features.html \
! 310: performance.html \
! 311: plugins.html \
! 312: proxy.html \
! 313: redirect.html \
! 314: rewrite.html \
! 315: secdownload.html \
! 316: security.html \
! 317: simple-vhost.html \
! 318: skeleton.html \
! 319: ssi.html \
! 320: ssl.html \
! 321: state.html \
! 322: rrdtool.html \
! 323: alias.html \
! 324: userdir.html \
! 325: mysqlvhost.html \
! 326: access.html \
! 327: traffic-shaping.html \
! 328: setenv.html \
! 329: status.html \
! 330: scgi.html \
! 331: cml.html \
! 332: trigger_b4_dl.html \
! 333: webdav.html \
! 334: expire.html \
! 335: dirlisting.html \
! 336: evhost.html \
! 337: magnet.html
! 338:
! 339: EXTRA_DIST = \
! 340: state.dot fastcgi-state.dot \
! 341: $(DOCS)
! 342:
! 343: all: all-am
! 344:
! 345: .SUFFIXES:
! 346: .SUFFIXES: .html .txt
! 347: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 348: @for dep in $?; do \
! 349: case '$(am__configure_deps)' in \
! 350: *$$dep*) \
! 351: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 352: && { if test -f $@; then exit 0; else break; fi; }; \
! 353: exit 1;; \
! 354: esac; \
! 355: done; \
! 356: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/outdated/Makefile'; \
! 357: $(am__cd) $(top_srcdir) && \
! 358: $(AUTOMAKE) --foreign doc/outdated/Makefile
! 359: .PRECIOUS: Makefile
! 360: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 361: @case '$?' in \
! 362: *config.status*) \
! 363: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 364: *) \
! 365: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 366: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 367: esac;
! 368:
! 369: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 370: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 371:
! 372: $(top_srcdir)/configure: $(am__configure_deps)
! 373: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 374: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 375: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 376: $(am__aclocal_m4_deps):
! 377:
! 378: mostlyclean-libtool:
! 379: -rm -f *.lo
! 380:
! 381: clean-libtool:
! 382: -rm -rf .libs _libs
! 383: tags TAGS:
! 384:
! 385: ctags CTAGS:
! 386:
! 387: cscope cscopelist:
! 388:
! 389:
! 390: distdir: $(DISTFILES)
! 391: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 392: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 393: list='$(DISTFILES)'; \
! 394: dist_files=`for file in $$list; do echo $$file; done | \
! 395: sed -e "s|^$$srcdirstrip/||;t" \
! 396: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 397: case $$dist_files in \
! 398: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 399: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 400: sort -u` ;; \
! 401: esac; \
! 402: for file in $$dist_files; do \
! 403: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 404: if test -d $$d/$$file; then \
! 405: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 406: if test -d "$(distdir)/$$file"; then \
! 407: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 408: fi; \
! 409: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 410: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 411: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 412: fi; \
! 413: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 414: else \
! 415: test -f "$(distdir)/$$file" \
! 416: || cp -p $$d/$$file "$(distdir)/$$file" \
! 417: || exit 1; \
! 418: fi; \
! 419: done
! 420: check-am: all-am
! 421: check: check-am
! 422: all-am: Makefile
! 423: installdirs:
! 424: install: install-am
! 425: install-exec: install-exec-am
! 426: install-data: install-data-am
! 427: uninstall: uninstall-am
! 428:
! 429: install-am: all-am
! 430: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 431:
! 432: installcheck: installcheck-am
! 433: install-strip:
! 434: if test -z '$(STRIP)'; then \
! 435: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 436: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 437: install; \
! 438: else \
! 439: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 440: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 441: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 442: fi
! 443: mostlyclean-generic:
! 444:
! 445: clean-generic:
! 446:
! 447: distclean-generic:
! 448: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 449: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 450:
! 451: maintainer-clean-generic:
! 452: @echo "This command is intended for maintainers to use"
! 453: @echo "it deletes files that may require special tools to rebuild."
! 454: clean: clean-am
! 455:
! 456: clean-am: clean-generic clean-libtool clean-local mostlyclean-am
! 457:
! 458: distclean: distclean-am
! 459: -rm -f Makefile
! 460: distclean-am: clean-am distclean-generic
! 461:
! 462: dvi: dvi-am
! 463:
! 464: dvi-am:
! 465:
! 466: html: html-am
! 467:
! 468: html-am: html-local
! 469:
! 470: info: info-am
! 471:
! 472: info-am:
! 473:
! 474: install-data-am:
! 475:
! 476: install-dvi: install-dvi-am
! 477:
! 478: install-dvi-am:
! 479:
! 480: install-exec-am:
! 481:
! 482: install-html: install-html-am
! 483:
! 484: install-html-am:
! 485:
! 486: install-info: install-info-am
! 487:
! 488: install-info-am:
! 489:
! 490: install-man:
! 491:
! 492: install-pdf: install-pdf-am
! 493:
! 494: install-pdf-am:
! 495:
! 496: install-ps: install-ps-am
! 497:
! 498: install-ps-am:
! 499:
! 500: installcheck-am:
! 501:
! 502: maintainer-clean: maintainer-clean-am
! 503: -rm -f Makefile
! 504: maintainer-clean-am: distclean-am maintainer-clean-generic
! 505:
! 506: mostlyclean: mostlyclean-am
! 507:
! 508: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 509:
! 510: pdf: pdf-am
! 511:
! 512: pdf-am:
! 513:
! 514: ps: ps-am
! 515:
! 516: ps-am:
! 517:
! 518: uninstall-am:
! 519:
! 520: .MAKE: install-am install-strip
! 521:
! 522: .PHONY: all all-am check check-am clean clean-generic clean-libtool \
! 523: clean-local cscopelist-am ctags-am distclean distclean-generic \
! 524: distclean-libtool distdir dvi dvi-am html html-am html-local \
! 525: info info-am install install-am install-data install-data-am \
! 526: install-dvi install-dvi-am install-exec install-exec-am \
! 527: install-html install-html-am install-info install-info-am \
! 528: install-man install-pdf install-pdf-am install-ps \
! 529: install-ps-am install-strip installcheck installcheck-am \
! 530: installdirs maintainer-clean maintainer-clean-generic \
! 531: mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
! 532: ps ps-am tags-am uninstall uninstall-am
! 533:
! 534:
! 535: .txt.html:
! 536: rst2html $^ > $@
! 537:
! 538: html-local: $(HTMLDOCS)
! 539:
! 540: #%.ps.gz: %.ps
! 541: # gzip $^
! 542:
! 543: #%.ps: %.dot
! 544: # dot -Tps -o $@ $^
! 545:
! 546: clean-local:
! 547: rm -f *.html
! 548:
! 549: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 550: # Otherwise a system limit (for SysV at least) may be exceeded.
! 551: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / lighttpd / doc / outdated