Annotation of embedaddon/lighttpd/tests/docroot/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.14 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994-2013 Free Software Foundation, Inc.
! 5:
! 6: # This Makefile.in is free software; the Free Software Foundation
! 7: # gives unlimited permission to copy and/or distribute it,
! 8: # with or without modifications, as long as this notice is preserved.
! 9:
! 10: # This program is distributed in the hope that it will be useful,
! 11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 13: # PARTICULAR PURPOSE.
! 14:
! 15: @SET_MAKE@
! 16: VPATH = @srcdir@
! 17: am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
! 18: am__make_running_with_option = \
! 19: case $${target_option-} in \
! 20: ?) ;; \
! 21: *) echo "am__make_running_with_option: internal error: invalid" \
! 22: "target option '$${target_option-}' specified" >&2; \
! 23: exit 1;; \
! 24: esac; \
! 25: has_opt=no; \
! 26: sane_makeflags=$$MAKEFLAGS; \
! 27: if $(am__is_gnu_make); then \
! 28: sane_makeflags=$$MFLAGS; \
! 29: else \
! 30: case $$MAKEFLAGS in \
! 31: *\\[\ \ ]*) \
! 32: bs=\\; \
! 33: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
! 34: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
! 35: esac; \
! 36: fi; \
! 37: skip_next=no; \
! 38: strip_trailopt () \
! 39: { \
! 40: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
! 41: }; \
! 42: for flg in $$sane_makeflags; do \
! 43: test $$skip_next = yes && { skip_next=no; continue; }; \
! 44: case $$flg in \
! 45: *=*|--*) continue;; \
! 46: -*I) strip_trailopt 'I'; skip_next=yes;; \
! 47: -*I?*) strip_trailopt 'I';; \
! 48: -*O) strip_trailopt 'O'; skip_next=yes;; \
! 49: -*O?*) strip_trailopt 'O';; \
! 50: -*l) strip_trailopt 'l'; skip_next=yes;; \
! 51: -*l?*) strip_trailopt 'l';; \
! 52: -[dEDm]) skip_next=yes;; \
! 53: -[JT]) skip_next=yes;; \
! 54: esac; \
! 55: case $$flg in \
! 56: *$$target_option*) has_opt=yes; break;; \
! 57: esac; \
! 58: done; \
! 59: test $$has_opt = yes
! 60: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
! 61: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
! 62: pkgdatadir = $(datadir)/@PACKAGE@
! 63: pkgincludedir = $(includedir)/@PACKAGE@
! 64: pkglibdir = $(libdir)/@PACKAGE@
! 65: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 66: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 67: install_sh_DATA = $(install_sh) -c -m 644
! 68: install_sh_PROGRAM = $(install_sh) -c
! 69: install_sh_SCRIPT = $(install_sh) -c
! 70: INSTALL_HEADER = $(INSTALL_DATA)
! 71: transform = $(program_transform_name)
! 72: NORMAL_INSTALL = :
! 73: PRE_INSTALL = :
! 74: POST_INSTALL = :
! 75: NORMAL_UNINSTALL = :
! 76: PRE_UNINSTALL = :
! 77: POST_UNINSTALL = :
! 78: build_triplet = @build@
! 79: host_triplet = @host@
! 80: target_triplet = @target@
! 81: subdir = tests/docroot
! 82: DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
! 83: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 84: am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
! 85: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
! 86: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
! 87: $(top_srcdir)/configure.ac
! 88: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 89: $(ACLOCAL_M4)
! 90: mkinstalldirs = $(install_sh) -d
! 91: CONFIG_HEADER = $(top_builddir)/config.h
! 92: CONFIG_CLEAN_FILES =
! 93: CONFIG_CLEAN_VPATH_FILES =
! 94: AM_V_P = $(am__v_P_@AM_V@)
! 95: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
! 96: am__v_P_0 = false
! 97: am__v_P_1 = :
! 98: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 99: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
! 100: am__v_GEN_0 = @echo " GEN " $@;
! 101: am__v_GEN_1 =
! 102: AM_V_at = $(am__v_at_@AM_V@)
! 103: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
! 104: am__v_at_0 = @
! 105: am__v_at_1 =
! 106: SOURCES =
! 107: DIST_SOURCES =
! 108: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
! 109: ctags-recursive dvi-recursive html-recursive info-recursive \
! 110: install-data-recursive install-dvi-recursive \
! 111: install-exec-recursive install-html-recursive \
! 112: install-info-recursive install-pdf-recursive \
! 113: install-ps-recursive install-recursive installcheck-recursive \
! 114: installdirs-recursive pdf-recursive ps-recursive \
! 115: tags-recursive uninstall-recursive
! 116: am__can_run_installinfo = \
! 117: case $$AM_UPDATE_INFO_DIR in \
! 118: n|no|NO) false;; \
! 119: *) (install-info --version) >/dev/null 2>&1;; \
! 120: esac
! 121: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
! 122: distclean-recursive maintainer-clean-recursive
! 123: am__recursive_targets = \
! 124: $(RECURSIVE_TARGETS) \
! 125: $(RECURSIVE_CLEAN_TARGETS) \
! 126: $(am__extra_recursive_targets)
! 127: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
! 128: distdir
! 129: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
! 130: # Read a list of newline-separated strings from the standard input,
! 131: # and print each of them once, without duplicates. Input order is
! 132: # *not* preserved.
! 133: am__uniquify_input = $(AWK) '\
! 134: BEGIN { nonempty = 0; } \
! 135: { items[$$0] = 1; nonempty = 1; } \
! 136: END { if (nonempty) { for (i in items) print i; }; } \
! 137: '
! 138: # Make sure the list of sources is unique. This is necessary because,
! 139: # e.g., the same source file might be shared among _SOURCES variables
! 140: # for different programs/libraries.
! 141: am__define_uniq_tagged_files = \
! 142: list='$(am__tagged_files)'; \
! 143: unique=`for i in $$list; do \
! 144: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 145: done | $(am__uniquify_input)`
! 146: ETAGS = etags
! 147: CTAGS = ctags
! 148: DIST_SUBDIRS = $(SUBDIRS)
! 149: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 150: am__relativize = \
! 151: dir0=`pwd`; \
! 152: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
! 153: sed_rest='s,^[^/]*/*,,'; \
! 154: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
! 155: sed_butlast='s,/*[^/]*$$,,'; \
! 156: while test -n "$$dir1"; do \
! 157: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
! 158: if test "$$first" != "."; then \
! 159: if test "$$first" = ".."; then \
! 160: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
! 161: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
! 162: else \
! 163: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
! 164: if test "$$first2" = "$$first"; then \
! 165: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
! 166: else \
! 167: dir2="../$$dir2"; \
! 168: fi; \
! 169: dir0="$$dir0"/"$$first"; \
! 170: fi; \
! 171: fi; \
! 172: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
! 173: done; \
! 174: reldir="$$dir2"
! 175: ACLOCAL = @ACLOCAL@
! 176: AMTAR = @AMTAR@
! 177: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
! 178: AR = @AR@
! 179: ATTR_LIB = @ATTR_LIB@
! 180: AUTOCONF = @AUTOCONF@
! 181: AUTOHEADER = @AUTOHEADER@
! 182: AUTOMAKE = @AUTOMAKE@
! 183: AWK = @AWK@
! 184: BZ_LIB = @BZ_LIB@
! 185: CC = @CC@
! 186: CCDEPMODE = @CCDEPMODE@
! 187: CFLAGS = @CFLAGS@
! 188: CPP = @CPP@
! 189: CPPFLAGS = @CPPFLAGS@
! 190: CRYPT_LIB = @CRYPT_LIB@
! 191: CYGPATH_W = @CYGPATH_W@
! 192: DEFS = @DEFS@
! 193: DEPDIR = @DEPDIR@
! 194: DLLTOOL = @DLLTOOL@
! 195: DL_LIB = @DL_LIB@
! 196: DSYMUTIL = @DSYMUTIL@
! 197: DUMPBIN = @DUMPBIN@
! 198: ECHO_C = @ECHO_C@
! 199: ECHO_N = @ECHO_N@
! 200: ECHO_T = @ECHO_T@
! 201: EGREP = @EGREP@
! 202: EXEEXT = @EXEEXT@
! 203: FAM_CFLAGS = @FAM_CFLAGS@
! 204: FAM_LIBS = @FAM_LIBS@
! 205: FGREP = @FGREP@
! 206: GDBM_LIB = @GDBM_LIB@
! 207: GREP = @GREP@
! 208: INSTALL = @INSTALL@
! 209: INSTALL_DATA = @INSTALL_DATA@
! 210: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 211: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 212: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 213: LBER_LIB = @LBER_LIB@
! 214: LD = @LD@
! 215: LDAP_LIB = @LDAP_LIB@
! 216: LDFLAGS = @LDFLAGS@
! 217: LIBEV_CFLAGS = @LIBEV_CFLAGS@
! 218: LIBEV_LIBS = @LIBEV_LIBS@
! 219: LIBOBJS = @LIBOBJS@
! 220: LIBS = @LIBS@
! 221: LIBTOOL = @LIBTOOL@
! 222: LIPO = @LIPO@
! 223: LN_S = @LN_S@
! 224: LTLIBOBJS = @LTLIBOBJS@
! 225: LUA_CFLAGS = @LUA_CFLAGS@
! 226: LUA_LIBS = @LUA_LIBS@
! 227: MAKEINFO = @MAKEINFO@
! 228: MANIFEST_TOOL = @MANIFEST_TOOL@
! 229: MEMCACHE_LIB = @MEMCACHE_LIB@
! 230: MKDIR_P = @MKDIR_P@
! 231: MYSQL_CONFIG = @MYSQL_CONFIG@
! 232: MYSQL_INCLUDE = @MYSQL_INCLUDE@
! 233: MYSQL_LIBS = @MYSQL_LIBS@
! 234: NM = @NM@
! 235: NMEDIT = @NMEDIT@
! 236: OBJDUMP = @OBJDUMP@
! 237: OBJEXT = @OBJEXT@
! 238: OTOOL = @OTOOL@
! 239: OTOOL64 = @OTOOL64@
! 240: PACKAGE = @PACKAGE@
! 241: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 242: PACKAGE_NAME = @PACKAGE_NAME@
! 243: PACKAGE_STRING = @PACKAGE_STRING@
! 244: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 245: PACKAGE_URL = @PACKAGE_URL@
! 246: PACKAGE_VERSION = @PACKAGE_VERSION@
! 247: PATH_SEPARATOR = @PATH_SEPARATOR@
! 248: PCRECONFIG = @PCRECONFIG@
! 249: PCRE_LIB = @PCRE_LIB@
! 250: PKG_CONFIG = @PKG_CONFIG@
! 251: PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
! 252: PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
! 253: RANLIB = @RANLIB@
! 254: SED = @SED@
! 255: SENDFILE_LIB = @SENDFILE_LIB@
! 256: SET_MAKE = @SET_MAKE@
! 257: SHELL = @SHELL@
! 258: SQLITE_CFLAGS = @SQLITE_CFLAGS@
! 259: SQLITE_LIBS = @SQLITE_LIBS@
! 260: SSL_LIB = @SSL_LIB@
! 261: STRIP = @STRIP@
! 262: UUID_LIBS = @UUID_LIBS@
! 263: VERSION = @VERSION@
! 264: XML_CFLAGS = @XML_CFLAGS@
! 265: XML_LIBS = @XML_LIBS@
! 266: Z_LIB = @Z_LIB@
! 267: abs_builddir = @abs_builddir@
! 268: abs_srcdir = @abs_srcdir@
! 269: abs_top_builddir = @abs_top_builddir@
! 270: abs_top_srcdir = @abs_top_srcdir@
! 271: ac_ct_AR = @ac_ct_AR@
! 272: ac_ct_CC = @ac_ct_CC@
! 273: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 274: am__include = @am__include@
! 275: am__leading_dot = @am__leading_dot@
! 276: am__quote = @am__quote@
! 277: am__tar = @am__tar@
! 278: am__untar = @am__untar@
! 279: bindir = @bindir@
! 280: build = @build@
! 281: build_alias = @build_alias@
! 282: build_cpu = @build_cpu@
! 283: build_os = @build_os@
! 284: build_vendor = @build_vendor@
! 285: builddir = @builddir@
! 286: datadir = @datadir@
! 287: datarootdir = @datarootdir@
! 288: docdir = @docdir@
! 289: dvidir = @dvidir@
! 290: exec_prefix = @exec_prefix@
! 291: host = @host@
! 292: host_alias = @host_alias@
! 293: host_cpu = @host_cpu@
! 294: host_os = @host_os@
! 295: host_vendor = @host_vendor@
! 296: htmldir = @htmldir@
! 297: includedir = @includedir@
! 298: infodir = @infodir@
! 299: install_sh = @install_sh@
! 300: libdir = @libdir@
! 301: libexecdir = @libexecdir@
! 302: localedir = @localedir@
! 303: localstatedir = @localstatedir@
! 304: mandir = @mandir@
! 305: mkdir_p = @mkdir_p@
! 306: oldincludedir = @oldincludedir@
! 307: pdfdir = @pdfdir@
! 308: prefix = @prefix@
! 309: program_transform_name = @program_transform_name@
! 310: psdir = @psdir@
! 311: sbindir = @sbindir@
! 312: sharedstatedir = @sharedstatedir@
! 313: srcdir = @srcdir@
! 314: sysconfdir = @sysconfdir@
! 315: target = @target@
! 316: target_alias = @target_alias@
! 317: target_cpu = @target_cpu@
! 318: target_os = @target_os@
! 319: target_vendor = @target_vendor@
! 320: top_build_prefix = @top_build_prefix@
! 321: top_builddir = @top_builddir@
! 322: top_srcdir = @top_srcdir@
! 323: SUBDIRS = 123 www
! 324: all: all-recursive
! 325:
! 326: .SUFFIXES:
! 327: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 328: @for dep in $?; do \
! 329: case '$(am__configure_deps)' in \
! 330: *$$dep*) \
! 331: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 332: && { if test -f $@; then exit 0; else break; fi; }; \
! 333: exit 1;; \
! 334: esac; \
! 335: done; \
! 336: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/docroot/Makefile'; \
! 337: $(am__cd) $(top_srcdir) && \
! 338: $(AUTOMAKE) --foreign tests/docroot/Makefile
! 339: .PRECIOUS: Makefile
! 340: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 341: @case '$?' in \
! 342: *config.status*) \
! 343: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 344: *) \
! 345: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 346: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 347: esac;
! 348:
! 349: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 350: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 351:
! 352: $(top_srcdir)/configure: $(am__configure_deps)
! 353: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 354: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 355: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 356: $(am__aclocal_m4_deps):
! 357:
! 358: mostlyclean-libtool:
! 359: -rm -f *.lo
! 360:
! 361: clean-libtool:
! 362: -rm -rf .libs _libs
! 363:
! 364: # This directory's subdirectories are mostly independent; you can cd
! 365: # into them and run 'make' without going through this Makefile.
! 366: # To change the values of 'make' variables: instead of editing Makefiles,
! 367: # (1) if the variable is set in 'config.status', edit 'config.status'
! 368: # (which will cause the Makefiles to be regenerated when you run 'make');
! 369: # (2) otherwise, pass the desired values on the 'make' command line.
! 370: $(am__recursive_targets):
! 371: @fail=; \
! 372: if $(am__make_keepgoing); then \
! 373: failcom='fail=yes'; \
! 374: else \
! 375: failcom='exit 1'; \
! 376: fi; \
! 377: dot_seen=no; \
! 378: target=`echo $@ | sed s/-recursive//`; \
! 379: case "$@" in \
! 380: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 381: *) list='$(SUBDIRS)' ;; \
! 382: esac; \
! 383: for subdir in $$list; do \
! 384: echo "Making $$target in $$subdir"; \
! 385: if test "$$subdir" = "."; then \
! 386: dot_seen=yes; \
! 387: local_target="$$target-am"; \
! 388: else \
! 389: local_target="$$target"; \
! 390: fi; \
! 391: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 392: || eval $$failcom; \
! 393: done; \
! 394: if test "$$dot_seen" = "no"; then \
! 395: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
! 396: fi; test -z "$$fail"
! 397:
! 398: ID: $(am__tagged_files)
! 399: $(am__define_uniq_tagged_files); mkid -fID $$unique
! 400: tags: tags-recursive
! 401: TAGS: tags
! 402:
! 403: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
! 404: set x; \
! 405: here=`pwd`; \
! 406: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
! 407: include_option=--etags-include; \
! 408: empty_fix=.; \
! 409: else \
! 410: include_option=--include; \
! 411: empty_fix=; \
! 412: fi; \
! 413: list='$(SUBDIRS)'; for subdir in $$list; do \
! 414: if test "$$subdir" = .; then :; else \
! 415: test ! -f $$subdir/TAGS || \
! 416: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
! 417: fi; \
! 418: done; \
! 419: $(am__define_uniq_tagged_files); \
! 420: shift; \
! 421: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
! 422: test -n "$$unique" || unique=$$empty_fix; \
! 423: if test $$# -gt 0; then \
! 424: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 425: "$$@" $$unique; \
! 426: else \
! 427: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 428: $$unique; \
! 429: fi; \
! 430: fi
! 431: ctags: ctags-recursive
! 432:
! 433: CTAGS: ctags
! 434: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
! 435: $(am__define_uniq_tagged_files); \
! 436: test -z "$(CTAGS_ARGS)$$unique" \
! 437: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
! 438: $$unique
! 439:
! 440: GTAGS:
! 441: here=`$(am__cd) $(top_builddir) && pwd` \
! 442: && $(am__cd) $(top_srcdir) \
! 443: && gtags -i $(GTAGS_ARGS) "$$here"
! 444: cscopelist: cscopelist-recursive
! 445:
! 446: cscopelist-am: $(am__tagged_files)
! 447: list='$(am__tagged_files)'; \
! 448: case "$(srcdir)" in \
! 449: [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
! 450: *) sdir=$(subdir)/$(srcdir) ;; \
! 451: esac; \
! 452: for i in $$list; do \
! 453: if test -f "$$i"; then \
! 454: echo "$(subdir)/$$i"; \
! 455: else \
! 456: echo "$$sdir/$$i"; \
! 457: fi; \
! 458: done >> $(top_builddir)/cscope.files
! 459:
! 460: distclean-tags:
! 461: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
! 462:
! 463: distdir: $(DISTFILES)
! 464: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 465: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 466: list='$(DISTFILES)'; \
! 467: dist_files=`for file in $$list; do echo $$file; done | \
! 468: sed -e "s|^$$srcdirstrip/||;t" \
! 469: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 470: case $$dist_files in \
! 471: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 472: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 473: sort -u` ;; \
! 474: esac; \
! 475: for file in $$dist_files; do \
! 476: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 477: if test -d $$d/$$file; then \
! 478: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 479: if test -d "$(distdir)/$$file"; then \
! 480: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 481: fi; \
! 482: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 483: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 484: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 485: fi; \
! 486: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 487: else \
! 488: test -f "$(distdir)/$$file" \
! 489: || cp -p $$d/$$file "$(distdir)/$$file" \
! 490: || exit 1; \
! 491: fi; \
! 492: done
! 493: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 494: if test "$$subdir" = .; then :; else \
! 495: $(am__make_dryrun) \
! 496: || test -d "$(distdir)/$$subdir" \
! 497: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 498: || exit 1; \
! 499: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
! 500: $(am__relativize); \
! 501: new_distdir=$$reldir; \
! 502: dir1=$$subdir; dir2="$(top_distdir)"; \
! 503: $(am__relativize); \
! 504: new_top_distdir=$$reldir; \
! 505: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
! 506: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
! 507: ($(am__cd) $$subdir && \
! 508: $(MAKE) $(AM_MAKEFLAGS) \
! 509: top_distdir="$$new_top_distdir" \
! 510: distdir="$$new_distdir" \
! 511: am__remove_distdir=: \
! 512: am__skip_length_check=: \
! 513: am__skip_mode_fix=: \
! 514: distdir) \
! 515: || exit 1; \
! 516: fi; \
! 517: done
! 518: check-am: all-am
! 519: check: check-recursive
! 520: all-am: Makefile
! 521: installdirs: installdirs-recursive
! 522: installdirs-am:
! 523: install: install-recursive
! 524: install-exec: install-exec-recursive
! 525: install-data: install-data-recursive
! 526: uninstall: uninstall-recursive
! 527:
! 528: install-am: all-am
! 529: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 530:
! 531: installcheck: installcheck-recursive
! 532: install-strip:
! 533: if test -z '$(STRIP)'; then \
! 534: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 535: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 536: install; \
! 537: else \
! 538: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 539: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 540: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 541: fi
! 542: mostlyclean-generic:
! 543:
! 544: clean-generic:
! 545:
! 546: distclean-generic:
! 547: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 548: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 549:
! 550: maintainer-clean-generic:
! 551: @echo "This command is intended for maintainers to use"
! 552: @echo "it deletes files that may require special tools to rebuild."
! 553: clean: clean-recursive
! 554:
! 555: clean-am: clean-generic clean-libtool mostlyclean-am
! 556:
! 557: distclean: distclean-recursive
! 558: -rm -f Makefile
! 559: distclean-am: clean-am distclean-generic distclean-tags
! 560:
! 561: dvi: dvi-recursive
! 562:
! 563: dvi-am:
! 564:
! 565: html: html-recursive
! 566:
! 567: html-am:
! 568:
! 569: info: info-recursive
! 570:
! 571: info-am:
! 572:
! 573: install-data-am:
! 574:
! 575: install-dvi: install-dvi-recursive
! 576:
! 577: install-dvi-am:
! 578:
! 579: install-exec-am:
! 580:
! 581: install-html: install-html-recursive
! 582:
! 583: install-html-am:
! 584:
! 585: install-info: install-info-recursive
! 586:
! 587: install-info-am:
! 588:
! 589: install-man:
! 590:
! 591: install-pdf: install-pdf-recursive
! 592:
! 593: install-pdf-am:
! 594:
! 595: install-ps: install-ps-recursive
! 596:
! 597: install-ps-am:
! 598:
! 599: installcheck-am:
! 600:
! 601: maintainer-clean: maintainer-clean-recursive
! 602: -rm -f Makefile
! 603: maintainer-clean-am: distclean-am maintainer-clean-generic
! 604:
! 605: mostlyclean: mostlyclean-recursive
! 606:
! 607: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 608:
! 609: pdf: pdf-recursive
! 610:
! 611: pdf-am:
! 612:
! 613: ps: ps-recursive
! 614:
! 615: ps-am:
! 616:
! 617: uninstall-am:
! 618:
! 619: .MAKE: $(am__recursive_targets) install-am install-strip
! 620:
! 621: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
! 622: check-am clean clean-generic clean-libtool cscopelist-am ctags \
! 623: ctags-am distclean distclean-generic distclean-libtool \
! 624: distclean-tags distdir dvi dvi-am html html-am info info-am \
! 625: install install-am install-data install-data-am install-dvi \
! 626: install-dvi-am install-exec install-exec-am install-html \
! 627: install-html-am install-info install-info-am install-man \
! 628: install-pdf install-pdf-am install-ps install-ps-am \
! 629: install-strip installcheck installcheck-am installdirs \
! 630: installdirs-am maintainer-clean maintainer-clean-generic \
! 631: mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
! 632: ps ps-am tags tags-am uninstall uninstall-am
! 633:
! 634:
! 635: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 636: # Otherwise a system limit (for SysV at least) may be exceeded.
! 637: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / lighttpd / tests / docroot