Annotation of embedaddon/lrzsz/po/ChangeLog, revision 1.1
1.1 ! misho 1: /* Automatically generated by po2tbl.sed from lrzsz.pot. */
! 2:
! 3: #if HAVE_CONFIG_H
! 4: # include <config.h>
! 5: #endif
! 6:
! 7: #include "libgettext.h"
! 8:
! 9: const struct _msg_ent _msg_tbl[] = {
! 10: {"", 1},
! 11: {"Transfer complete.", 2},
! 12: {"need at least one file to send", 3},
! 13: {"option C needs argument", 4},
! 14: {"option c needs argument", 5},
! 15: {"option L needs argument", 6},
! 16: {"argument to option L out of range 24..%ld", 7},
! 17: {"option l needs argument", 8},
! 18: {"argument to option l out of range 32..%ld", 9},
! 19: {"argument to option t out of range 10..1000", 10},
! 20: {"security violation: can't do that under restricted shell\n", 11},
! 21: {"option w needs argument", 12},
! 22: {"unknown option", 13},
! 23: {"Can't send command in restricted mode\n", 14},
! 24: {"out of memory", 15},
! 25: {"Transfer incomplete\n", 16},
! 26: {"Transfer complete\n", 17},
! 27: {"Answering TIMESYNC", 18},
! 28: {"at", 19},
! 29: {"timezone", 20},
! 30: {"unknown", 21},
! 31: {"TIMESYNC: failed\n", 22},
! 32: {"TIMESYNC: ok\n", 23},
! 33: {" cannot open tmpfile %s: %s", 24},
! 34: {"Can't open any requested files.", 25},
! 35: {"Security Violation", 26},
! 36: {"Sending %s, %ld blocks: ", 27},
! 37: {"Give your local XMODEM receive command now.", 28},
! 38: {"Sending: %s\n", 29},
! 39: {"Timeout on pathname", 30},
! 40: {"Receiver Cancelled", 31},
! 41: {"No ACK on EOT", 32},
! 42: {"Ymodem sectors/kbytes sent: %3d/%2dk", 33},
! 43: {"Cancelled", 34},
! 44: {"Timeout on sector ACK", 35},
! 45: {"NAK on sector", 36},
! 46: {"Got burst for sector ACK", 37},
! 47: {"Got %02x for sector ACK", 38},
! 48: {"Retry Count Exceeded", 39},
! 49: {"%s version %s for %s %s\n", 40},
! 50: {"Send file(s) with ZMODEM/YMODEM/XMODEM Protocol\n", 41},
! 51: {"\
! 52: \t(Y) = Option applies to YMODEM only\n\
! 53: \t(Z) = Option applies to ZMODEM only\n", 42},
! 54: {"Usage: %s %s\n", 43},
! 55: {"\
! 56: \tlsz [-2Ceqv] -c COMMAND\n\
! 57: \tlsb [-2adfkquv] [-] file ...\n\
! 58: \tlsx [-2akquv] [-] file\n\
! 59: \t2 Use 2 stop bits\n\
! 60: \t8 go up to 8K blocksize (give twice to start with 8K blocksize)\n\
! 61: \t+ Append to existing destination file (Z)\n\
! 62: \ta (ASCII) change NL to CR/LF\n\
! 63: \tb Binary file transfer override\n\
! 64: \tc send COMMAND (Z)\n\
! 65: \td Change '.' to '/' in pathnames (Y/Z)\n\
! 66: \te Escape all control characters (Z)\n\
! 67: \tf send Full pathname (Y/Z)\n\
! 68: \ti send COMMAND, ack Immediately (Z)\n\
! 69: \th Print this usage message\n\
! 70: \tk Send 1024 byte packets (Y)\n\
! 71: \tL N Limit subpacket length to N bytes (Z)\n\
! 72: \tl N Limit frame length to N bytes (l>=L) (Z)\n\
! 73: \tn send file if source newer (Z)\n\
! 74: \tN send file if source newer or longer (Z)\n\
! 75: \to Use 16 bit CRC instead of 32 bit CRC (Z)\n\
! 76: \tp Protect existing destination file (Z)\n\
! 77: \tr Resume/Recover interrupted file transfer (Z)\n\
! 78: \tq Quiet (no progress reports)\n\
! 79: \tu Unlink file after transmission\n\
! 80: \tU disable restricted mode (if allowed to)\n\
! 81: \tv Verbose - provide debugging information\n\
! 82: \tw N Window is N bytes (Z)\n\
! 83: \tY Yes, overwrite existing file, skip if not present at rx (Z)\n\
! 84: \ty Yes, overwrite existing file (Z)\n", 44},
! 85: {"Bytes Sent:%7ld/%7ld BPS:%-8ld ETA %02d:%02d ", 45},
! 86: {"Bytes Sent:%7ld BPS:%-8ld \n", 46},
! 87: {"Falldown to %ld blklen", 47},
! 88: {"Sender Canceled", 48},
! 89: {"TIMEOUT", 49},
! 90: {"Bad data subpacket", 50},
! 91: {"Data subpacket too long", 51},
! 92: {"Garbage count exceeded", 52},
! 93: {"Got %s", 53},
! 94: {"Bad escape sequence %x", 54},
! 95: {"Retry %d: ", 55},
! 96: {"don't have settimeofday, will not set time\n", 56},
! 97: {"not running as root (this is good!), can not set time\n", 57},
! 98: {"option t needs argument", 58},
! 99: {"for", 59},
! 100: {"Receive files with ZMODEM/YMODEM/XMODEM protocol\n", 60},
! 101: {"\
! 102: \t+ append to existing files\n\
! 103: \ta ASCII transfer (change CR/LF to LF)\n\
! 104: \tb binary transfer\n\
! 105: \tc Use 16 bit CRC (XMODEM only)\n\
! 106: \tC allow execution of remote commands (ZMODEM only)\n\
! 107: \tD write all received data to /dev/null\n\
! 108: \te Escape control characters\t(ZMODEM)\n\
! 109: \th Help, print this usage message\n\
! 110: \tO disable timeout code, wait forever for remote data\n\
! 111: \tp protect existing files\n\
! 112: \tq quiet, no progress reports\n\
! 113: \tr try to resume interrupted file transfer (ZMODEM only)\n\
! 114: \tR restricted, more secure mode\n\
! 115: \tS request timesync packet (give twice to set local time)\n\
! 116: \tu keep upper case filenames\n\
! 117: \tU disable restricted mode (if allowed to)\n\
! 118: \tv Verbose - provide debugging information\n\
! 119: \tw N Window is N bytes (Z)\n\
! 120: \ty Yes, clobber existing file if any\n", 61},
! 121: {"%s waiting to receive.", 62},
! 122: {"%s: ready to receive %s", 63},
! 123: {"%s: %s removed.", 64},
! 124: {"Pathname fetch returned EOT", 65},
! 125: {"Received dup Sector", 66},
! 126: {"Sync Error", 67},
! 127: {"CRC", 68},
! 128: {"Checksum", 69},
! 129: {"Sector number garbled", 70},
! 130: {"Sender CANcelled", 71},
! 131: {"Got 0%o sector header", 72},
! 132: {"TIMESYNC: here %ld, remote %ld, diff %d seconds\n", 73},
! 133: {"TIMESYNC: cannot set time: %s\n", 74},
! 134: {"Topipe", 75},
! 135: {"Receiving: %s\n", 76},
! 136: {"cannot open %s", 77},
! 137: {"Blocks received: %d", 78},
! 138: {"%s: %s exists\n", 79},
! 139: {"%s:\tSecurity Violation", 80},
! 140: {"remote command execution requested", 81},
! 141: {"not executed", 82},
! 142: {"Bytes Received: %7ld/%7ld BPS:%-6ld ", 83},
! 143: {"Bytes Received: %7ld/%7ld BPS:%-6ld ETA %02d:%02d ", 84},
! 144: {"file close error", 85},
! 145: };
! 146:
! 147: int _msg_tbl_length = 85;
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ChangeLog CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / lrzsz / po