Annotation of embedaddon/lrzsz/po/ChangeLog, revision 1.1.1.1
1.1 misho 1: /* Automatically generated by po2tbl.sed from lrzsz.pot. */
2:
3: #if HAVE_CONFIG_H
4: # include <config.h>
5: #endif
6:
7: #include "libgettext.h"
8:
9: const struct _msg_ent _msg_tbl[] = {
10: {"", 1},
11: {"Transfer complete.", 2},
12: {"need at least one file to send", 3},
13: {"option C needs argument", 4},
14: {"option c needs argument", 5},
15: {"option L needs argument", 6},
16: {"argument to option L out of range 24..%ld", 7},
17: {"option l needs argument", 8},
18: {"argument to option l out of range 32..%ld", 9},
19: {"argument to option t out of range 10..1000", 10},
20: {"security violation: can't do that under restricted shell\n", 11},
21: {"option w needs argument", 12},
22: {"unknown option", 13},
23: {"Can't send command in restricted mode\n", 14},
24: {"out of memory", 15},
25: {"Transfer incomplete\n", 16},
26: {"Transfer complete\n", 17},
27: {"Answering TIMESYNC", 18},
28: {"at", 19},
29: {"timezone", 20},
30: {"unknown", 21},
31: {"TIMESYNC: failed\n", 22},
32: {"TIMESYNC: ok\n", 23},
33: {" cannot open tmpfile %s: %s", 24},
34: {"Can't open any requested files.", 25},
35: {"Security Violation", 26},
36: {"Sending %s, %ld blocks: ", 27},
37: {"Give your local XMODEM receive command now.", 28},
38: {"Sending: %s\n", 29},
39: {"Timeout on pathname", 30},
40: {"Receiver Cancelled", 31},
41: {"No ACK on EOT", 32},
42: {"Ymodem sectors/kbytes sent: %3d/%2dk", 33},
43: {"Cancelled", 34},
44: {"Timeout on sector ACK", 35},
45: {"NAK on sector", 36},
46: {"Got burst for sector ACK", 37},
47: {"Got %02x for sector ACK", 38},
48: {"Retry Count Exceeded", 39},
49: {"%s version %s for %s %s\n", 40},
50: {"Send file(s) with ZMODEM/YMODEM/XMODEM Protocol\n", 41},
51: {"\
52: \t(Y) = Option applies to YMODEM only\n\
53: \t(Z) = Option applies to ZMODEM only\n", 42},
54: {"Usage: %s %s\n", 43},
55: {"\
56: \tlsz [-2Ceqv] -c COMMAND\n\
57: \tlsb [-2adfkquv] [-] file ...\n\
58: \tlsx [-2akquv] [-] file\n\
59: \t2 Use 2 stop bits\n\
60: \t8 go up to 8K blocksize (give twice to start with 8K blocksize)\n\
61: \t+ Append to existing destination file (Z)\n\
62: \ta (ASCII) change NL to CR/LF\n\
63: \tb Binary file transfer override\n\
64: \tc send COMMAND (Z)\n\
65: \td Change '.' to '/' in pathnames (Y/Z)\n\
66: \te Escape all control characters (Z)\n\
67: \tf send Full pathname (Y/Z)\n\
68: \ti send COMMAND, ack Immediately (Z)\n\
69: \th Print this usage message\n\
70: \tk Send 1024 byte packets (Y)\n\
71: \tL N Limit subpacket length to N bytes (Z)\n\
72: \tl N Limit frame length to N bytes (l>=L) (Z)\n\
73: \tn send file if source newer (Z)\n\
74: \tN send file if source newer or longer (Z)\n\
75: \to Use 16 bit CRC instead of 32 bit CRC (Z)\n\
76: \tp Protect existing destination file (Z)\n\
77: \tr Resume/Recover interrupted file transfer (Z)\n\
78: \tq Quiet (no progress reports)\n\
79: \tu Unlink file after transmission\n\
80: \tU disable restricted mode (if allowed to)\n\
81: \tv Verbose - provide debugging information\n\
82: \tw N Window is N bytes (Z)\n\
83: \tY Yes, overwrite existing file, skip if not present at rx (Z)\n\
84: \ty Yes, overwrite existing file (Z)\n", 44},
85: {"Bytes Sent:%7ld/%7ld BPS:%-8ld ETA %02d:%02d ", 45},
86: {"Bytes Sent:%7ld BPS:%-8ld \n", 46},
87: {"Falldown to %ld blklen", 47},
88: {"Sender Canceled", 48},
89: {"TIMEOUT", 49},
90: {"Bad data subpacket", 50},
91: {"Data subpacket too long", 51},
92: {"Garbage count exceeded", 52},
93: {"Got %s", 53},
94: {"Bad escape sequence %x", 54},
95: {"Retry %d: ", 55},
96: {"don't have settimeofday, will not set time\n", 56},
97: {"not running as root (this is good!), can not set time\n", 57},
98: {"option t needs argument", 58},
99: {"for", 59},
100: {"Receive files with ZMODEM/YMODEM/XMODEM protocol\n", 60},
101: {"\
102: \t+ append to existing files\n\
103: \ta ASCII transfer (change CR/LF to LF)\n\
104: \tb binary transfer\n\
105: \tc Use 16 bit CRC (XMODEM only)\n\
106: \tC allow execution of remote commands (ZMODEM only)\n\
107: \tD write all received data to /dev/null\n\
108: \te Escape control characters\t(ZMODEM)\n\
109: \th Help, print this usage message\n\
110: \tO disable timeout code, wait forever for remote data\n\
111: \tp protect existing files\n\
112: \tq quiet, no progress reports\n\
113: \tr try to resume interrupted file transfer (ZMODEM only)\n\
114: \tR restricted, more secure mode\n\
115: \tS request timesync packet (give twice to set local time)\n\
116: \tu keep upper case filenames\n\
117: \tU disable restricted mode (if allowed to)\n\
118: \tv Verbose - provide debugging information\n\
119: \tw N Window is N bytes (Z)\n\
120: \ty Yes, clobber existing file if any\n", 61},
121: {"%s waiting to receive.", 62},
122: {"%s: ready to receive %s", 63},
123: {"%s: %s removed.", 64},
124: {"Pathname fetch returned EOT", 65},
125: {"Received dup Sector", 66},
126: {"Sync Error", 67},
127: {"CRC", 68},
128: {"Checksum", 69},
129: {"Sector number garbled", 70},
130: {"Sender CANcelled", 71},
131: {"Got 0%o sector header", 72},
132: {"TIMESYNC: here %ld, remote %ld, diff %d seconds\n", 73},
133: {"TIMESYNC: cannot set time: %s\n", 74},
134: {"Topipe", 75},
135: {"Receiving: %s\n", 76},
136: {"cannot open %s", 77},
137: {"Blocks received: %d", 78},
138: {"%s: %s exists\n", 79},
139: {"%s:\tSecurity Violation", 80},
140: {"remote command execution requested", 81},
141: {"not executed", 82},
142: {"Bytes Received: %7ld/%7ld BPS:%-6ld ", 83},
143: {"Bytes Received: %7ld/%7ld BPS:%-6ld ETA %02d:%02d ", 84},
144: {"file close error", 85},
145: };
146:
147: int _msg_tbl_length = 85;
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ChangeLog CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / lrzsz / po