Annotation of embedaddon/miniupnpd/INSTALL, revision 1.1.1.3
1.1 misho 1: MiniUPnP project.
1.1.1.3 ! misho 2: (c) 2006-2012 Thomas Bernard
1.1 misho 3: Homepage : http://miniupnp.free.fr/
4: Mirror: http://miniupnp.tuxfamily.org/
1.1.1.3 ! misho 5: github: https://github.com/miniupnp/miniupnp
1.1 misho 6:
7: miniupnpd is still under active developpement. This documentation is
8: likely to be a little outdated when you read it. So please go on the
9: web forum http://miniupnp.tuxfamily.org/ if you need more information.
10:
11: ================================ *BSD/pf =================================
12: To Build and Install :
13:
14: - use BSD make to compile.
15: - you can first 'make config.h' then edit config.h to your preferences and
16: finally 'make'
1.1.1.3 ! misho 17: Alternatively to editing config.h, options can be passed to genconfig.sh
! 18: For more details :
! 19: > ./genconfig.sh -h
1.1 misho 20: - add "rdr-anchor miniupnpd" and "anchor miniupnpd" lines to /etc/pf.conf
21: - some FreeBSD users reported that it is also necessary for them
22: to explicitly allow udp traffic on 239.0.0.0/8 by adding the two following
23: lines to /etc/pf.conf :
24: pass out on $int_if from any to 239.0.0.0/8 keep state
25: pass in on $int_if from any to 239.0.0.0/8 keep state
26: - dont forget to " pfctl -f /etc/pf.conf "
27: - you can check your modifications are taken into accout with
28: "pfctl -s nat" and "pfctl -s rule". Look for the "rdr-anchor miniupnpd"
29: and "anchor miniupnpd" lines.
30: - install as root using :
31: # make install
1.1.1.3 ! misho 32: or
1.1 misho 33: # PREFIX=/usr/local make install
34: - run as root : The daemon needs rights to modify pf rules.
35:
1.1.1.3 ! misho 36: edit the /etc/miniupnpd.conf file to set options. Almost all options are also
1.1 misho 37: available through command line switches.
38: To stop the daemon use :
39: > kill `cat /var/run/miniupnpd.pid`
40:
41: =========================== *BSD,*Solaris/ipf =============================
42:
43: genconfig.sh and the Makefile try to detect wether ipf or pf should be
44: used. If it fails, edit config.h and Makefile by hand.
45: In Makefile, the FWNAME variable value should be pf or ipf.
46: Installation steps are allmost the same as with pf.
47:
48: *Solaris users would be interested in reading informations from :
49: http://blogs.sun.com/avalon/category/IPFilter
50:
1.1.1.2 misho 51: ============================= Mac OS X/ipfw ===============================
52:
1.1.1.3 ! misho 53: - To enable non standard compilation options,
! 54: > ./genconfig.sh -h
! 55: Or edit config.h after it has been generated by genconfig.sh
1.1.1.2 misho 56: - use 'bsdmake' or 'make -f Makefile.macosx' to build
57:
1.1 misho 58: ============================ Linux/netfilter ==============================
59: To Build and install :
60:
61: - make sure you have libiptc available on your system :
62: if you are using debian, "apt-get install iptables-dev"
1.1.1.2 misho 63: Some versions of the iptables-dev package don't include the
64: necessary files : read "how to get libiptc with its headers on debian" below.
1.1 misho 65: In anycase, libiptc is available in iptables sources packages
66: from http://netfilter.org
67: - edit and run netfilter/iptables_init.sh shell script.
68: This script must allways be run before the daemon
69: to set up intial rules and chains.
70: - Build and edit the config.h file
71: > make -f Makefile.linux config.h
72: > vi config.h
73: - Build the daemon
74: > make -f Makefile.linux
1.1.1.3 ! misho 75: If not using iptables from your system,
1.1 misho 76: > IPTABLESPATH=/path/to/iptables-1.4.1 make -f Makefile.linux
77: note : make sure you have iptables with static libraries compiled.
78: use "./configure --enable-static" before compiling iptables
79: - install as root using :
80: > make -f Makefile.linux install
81: - A miniupnpd script should be installed to /etc/init.d
82: and the configuration files to /etc/miniupnpd
83: - anytime, you can use the netfilter/iptables_flush.sh
84: script to flush all rules added by the daemon.
85: - after killing the daemon, you can get back to
86: iptables initial state by runing the netfilter/iptables_removeall.sh
87: script. Don't forget to edit the script to your convinience.
88:
89: NOTE: a /etc/init.d/miniupnpd script will be installed.
90: If it suits you, you can use is with start, stop or restart argument.
91: # /etc/init.d/miniupnpd restart
92:
1.1.1.2 misho 93:
94: How to get libiptc with its headers on debian :
1.1.1.3 ! misho 95: (Note: that should be useless now that netfilter/tiny_nf_nat.h is included)
1.1.1.2 misho 96: - Use apt-get to get sources :
97: > apt-get source iptables
98: you should then have an iptables-x.x.x/ directory.
99: - configure and compile :
100: > cd iptables-x.x.x/
101: > ./configure --enable-static
102: > make
103: - it is now possible to compile miniupnpd using the following command :
104: > IPTABLESPATH=§path/to/iptables-x.x.x make -f Makefile.linux
105:
1.1 misho 106: =========================== Configuration =============================
1.1.1.3 ! misho 107: Edit the /etc/miniupnpd.conf file to set options. Almost all options are
! 108: also available through command line switches.
1.1 misho 109:
110: Miniupnpd supports some kind of security check for allowing or disallowing
111: redirection to be made. The UPnP permission rules are read from the
112: miniupnpd.conf configuration file.
113: When a new redirection is asked, permission rules are evaluated in top-down
114: order and the first permission rule matched gives the answer : redirection
115: allowed or denied. If no rule is matching, the redirection is allowed, so
116: it is a good practice to have a "catch all" deny permission rule at the end
117: of your mermission ruleset.
118: Sample permission ruleset :
119: allow 4662-4672 192.168.1.34/32 4662-4672
120: deny 0-65535 192.168.1.34/32 0-65535
121: allow 1024-65535 192.168.1.0/24 1024-65535
122: deny 0-65535 0.0.0.0/0 0-65535
123: With this ruleset, redirections are allowed only for host on the subnet
124: 192.168.1.0/255.255.255.0 for the ports 1024 or above. There is an exception
125: for the host 192.168.1.34 for which only redirections from/to port 4662 to
126: 4672 are allowed.
127:
128: You can generate the uuid for your UPnP device with the uuidgen available
129: under linux. The following following OpenBSD package is also providing
130: a "uuid" tool :
131: http://www.openbsd.org/4.0_packages/i386/uuid-1.5.0.tgz-long.html
132: An web based uuid generator is also available :
133: http://kruithof.xs4all.nl/uuid/uuidgen
134:
135: On linux systems, one could also use the command
136: 'cat /proc/sys/kernel/random/uuid' to generate an uuid.
137:
1.1.1.2 misho 138: More simple, use the genuuid makefile target :
139: > make genuuid
140: or
141: > make -f Makefile.linux genuuid
142: This target is needed by the "install" target, so it should be done
143: automatically.
144:
1.1 misho 145: To stop the daemon use :
146: # kill `cat /var/run/miniupnpd.pid`
1.1.1.3 ! misho 147: or if your linux system use /etc/init.d/
1.1 misho 148: # /etc/init.d/miniupnpd stop
149:
150:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to INSTALL CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / miniupnpd