Return to miniupnpd.8 CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / miniupnpd

1.8

    1: .TH MINIUPNPD 8
    2: .SH NAME
    3: miniupnpd \- UPnP Internet Gateway Device Daemon
    4: .SH SYNOPSIS
    5: .B miniupnpd
    6: [\-f file] [\-i interface] [\-o address]
    7: [\-a address] [\-p port] [\-d] [\-L] [\-U]
    8: [\-u uuid] [\-s serial] [\-m model_number]
    9: [\-q queue]
   10: [\-t interval] [\-P file]
   11: [\-B down up] [\-w url]
   12: .SH DESCRIPTION
   13: miniupnpd act as a UPnP Internet Gateway Device. It is designed
   14: to run on the gateway between the internet and a NAT'ed LAN. It provides
   15: an interface, as defined in the UPnP standard, for enabling
   16: clients on the LAN to ask for port redirections.
   17: .SH OPTIONS
   18: .TP
   19: .B \-f file
   20: load the config from file. default is /etc/miniupnpd.conf.
   21: .TP
   22: .B \-i interface
   23: interface used to connect to the internet.
   24: .TP
   25: .B \-o address
   26: address used to connect to the internet.
   27: default address of the interface will be used if not specified.
   28: .TP
   29: .B \-a address
   30: address on the LAN. \-a option can by used multiple time if LAN is
   31: subdivised in several subnetworks.
   32: .TP
   33: .B \-p port
   34: port used for HTTP.
   35: .TP
   36: .B \-d
   37: debug mode : do not go to background, output messages on console
   38: and do not filter out low priority messages.
   39: .TP
   40: .B \-L
   41: set packet log in pf on
   42: .TP
   43: .B \-q queue
   44: set ALTQ queue in pf. filter rules must be enabled for this option 
   45: to have any effect.
   46: .TP
   47: .B \-U
   48: report system uptime instead of daemon uptime to clients.
   49: .TP
   50: .B \-u uuid
   51: set the uuid of the UPnP Internet Gateway Device.
   52: .TP
   53: .B \-s serial
   54: serial number for the UPnP Internet Gateway Device.
   55: .TP
   56: .B \-m number
   57: model number for the UPnP Internet Gateway Device.
   58: .TP
   59: .B \-t interval
   60: SSDP notify interval in seconds :
   61: SSDP announce messages will be broadcasted at this interval.
   62: .TP
   63: .B \-P file
   64: pid file. default is /var/run/miniupnpd.pid
   65: .TP
   66: .B \-B down up
   67: download and upload bitrates reported to clients.
   68: .TP
   69: .B \-w url
   70: presentation url. default is first address on LAN, port 80.
   71: .SH "SEE ALSO"
   72: minissdpd(1) miniupnpc(3)
   73: .SH BUGS