Return to miniupnpd.conf CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / miniupnpd

Annotation of embedaddon/miniupnpd/miniupnpd.conf, revision 1.1

1.1     ! misho       1: # WAN network interface
        !             2: #ext_ifname=eth0
        !             3: ext_ifname=xl1
        !             4: # if the WAN interface has several IP addresses, you
        !             5: # can specify the one to use below
        !             6: #ext_ip=
        !             7: 
        !             8: # LAN network interfaces IPs / networks
        !             9: # there can be multiple listening ips for SSDP traffic.
        !            10: # should be under the form nnn.nnn.nnn.nnn/nn
        !            11: # HTTP is available on all interfaces
        !            12: # When MULTIPLE_EXTERNAL_IP is enabled, the external ip
        !            13: # address associated with the subnet follows. for example :
        !            14: #  listening_ip=192.168.0.1/24 88.22.44.13
        !            15: listening_ip=192.168.0.1/24
        !            16: listening_ip=192.168.1.1/24
        !            17: #listening_ip=
        !            18: # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
        !            19: port=0
        !            20: 
        !            21: # path to the unix socket used to communicate with MiniSSDPd
        !            22: # If running, MiniSSDPd will manage M-SEARCH answering.
        !            23: # default is /var/run/minissdpd.sock
        !            24: #minissdpdsocket=/var/run/minissdpd.sock
        !            25: 
        !            26: # enable NAT-PMP support (default is no)
        !            27: enable_natpmp=yes
        !            28: 
        !            29: # enable UPNP support (default is yes)
        !            30: enable_upnp=yes
        !            31: 
        !            32: # chain names for netfilter (not used for pf or ipf).
        !            33: # default is MINIUPNPD for both
        !            34: #upnp_forward_chain=forwardUPnP
        !            35: #upnp_nat_chain=UPnP
        !            36: 
        !            37: # lease file location
        !            38: #lease_file=/var/log/upnp.leases
        !            39: 
        !            40: # bitrates reported by daemon in bits per second
        !            41: bitrate_up=1000000
        !            42: bitrate_down=10000000
        !            43: 
        !            44: # "secure" mode : when enabled, UPnP client are allowed to add mappings only
        !            45: # to their IP.
        !            46: #secure_mode=yes
        !            47: secure_mode=no
        !            48: 
        !            49: # default presentation url is http address on port 80
        !            50: # If set to an empty string, no presentationURL element will appear
        !            51: # in the XML description of the device, which prevents MS Windows
        !            52: # from displaying an icon in the "Network Connections" panel.
        !            53: #presentation_url=http://www.mylan/index.php
        !            54: 
        !            55: # report system uptime instead of daemon uptime
        !            56: system_uptime=yes
        !            57: 
        !            58: # notify interval in seconds. default is 30 seconds.
        !            59: #notify_interval=240
        !            60: notify_interval=60
        !            61: 
        !            62: # unused rules cleaning.
        !            63: # never remove any rule before this threshold for the number
        !            64: # of redirections is exceeded. default to 20
        !            65: #clean_ruleset_threshold=10
        !            66: # clean process work interval in seconds. default to 0 (disabled).
        !            67: # a 600 seconds (10 minutes) interval makes sense
        !            68: clean_ruleset_interval=600
        !            69: 
        !            70: # log packets in pf
        !            71: #packet_log=no
        !            72: 
        !            73: # ALTQ queue in pf
        !            74: # filter rules must be used for this to be used.
        !            75: # compile with PF_ENABLE_FILTER_RULES (see config.h file)
        !            76: #queue=queue_name1
        !            77: 
        !            78: # tag name in pf
        !            79: #tag=tag_name1
        !            80: 
        !            81: # make filter rules in pf quick or not. default is yes
        !            82: # active when compiled with PF_ENABLE_FILTER_RULES (see config.h file)
        !            83: #quickrules=no
        !            84: 
        !            85: # uuid : generate your own with "make genuuid"
        !            86: uuid=fc4ec57e-b051-11db-88f8-0060085db3f6
        !            87: 
        !            88: # serial and model number the daemon will report to clients
        !            89: # in its XML description
        !            90: serial=12345678
        !            91: model_number=1
        !            92: 
        !            93: # UPnP permission rules
        !            94: # (allow|deny) (external port range) ip/mask (internal port range)
        !            95: # A port range is <min port>-<max port> or <port> if there is only
        !            96: # one port in the range.
        !            97: # ip/mask format must be nn.nn.nn.nn/nn
        !            98: # it is advised to only allow redirection of port above 1024
        !            99: # and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
        !           100: allow 1024-65535 192.168.0.0/24 1024-65535
        !           101: allow 1024-65535 192.168.1.0/24 1024-65535
        !           102: allow 1024-65535 192.168.0.0/23 22
        !           103: allow 12345 192.168.7.113/32 54321
        !           104: deny 0-65535 0.0.0.0/0 0-65535
        !           105: