Annotation of embedaddon/miniupnpd/miniupnpd.conf, revision 1.1.1.1

1.1       misho       1: # WAN network interface
                      2: #ext_ifname=eth0
                      3: ext_ifname=xl1
                      4: # if the WAN interface has several IP addresses, you
                      5: # can specify the one to use below
                      6: #ext_ip=
                      7: 
                      8: # LAN network interfaces IPs / networks
                      9: # there can be multiple listening ips for SSDP traffic.
                     10: # should be under the form nnn.nnn.nnn.nnn/nn
                     11: # HTTP is available on all interfaces
                     12: # When MULTIPLE_EXTERNAL_IP is enabled, the external ip
                     13: # address associated with the subnet follows. for example :
                     14: #  listening_ip=192.168.0.1/24 88.22.44.13
                     15: listening_ip=192.168.0.1/24
                     16: listening_ip=192.168.1.1/24
                     17: #listening_ip=
                     18: # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
                     19: port=0
                     20: 
                     21: # path to the unix socket used to communicate with MiniSSDPd
                     22: # If running, MiniSSDPd will manage M-SEARCH answering.
                     23: # default is /var/run/minissdpd.sock
                     24: #minissdpdsocket=/var/run/minissdpd.sock
                     25: 
                     26: # enable NAT-PMP support (default is no)
                     27: enable_natpmp=yes
                     28: 
                     29: # enable UPNP support (default is yes)
                     30: enable_upnp=yes
                     31: 
                     32: # chain names for netfilter (not used for pf or ipf).
                     33: # default is MINIUPNPD for both
                     34: #upnp_forward_chain=forwardUPnP
                     35: #upnp_nat_chain=UPnP
                     36: 
                     37: # lease file location
                     38: #lease_file=/var/log/upnp.leases
                     39: 
                     40: # bitrates reported by daemon in bits per second
                     41: bitrate_up=1000000
                     42: bitrate_down=10000000
                     43: 
                     44: # "secure" mode : when enabled, UPnP client are allowed to add mappings only
                     45: # to their IP.
                     46: #secure_mode=yes
                     47: secure_mode=no
                     48: 
                     49: # default presentation url is http address on port 80
                     50: # If set to an empty string, no presentationURL element will appear
                     51: # in the XML description of the device, which prevents MS Windows
                     52: # from displaying an icon in the "Network Connections" panel.
                     53: #presentation_url=http://www.mylan/index.php
                     54: 
                     55: # report system uptime instead of daemon uptime
                     56: system_uptime=yes
                     57: 
                     58: # notify interval in seconds. default is 30 seconds.
                     59: #notify_interval=240
                     60: notify_interval=60
                     61: 
                     62: # unused rules cleaning.
                     63: # never remove any rule before this threshold for the number
                     64: # of redirections is exceeded. default to 20
                     65: #clean_ruleset_threshold=10
                     66: # clean process work interval in seconds. default to 0 (disabled).
                     67: # a 600 seconds (10 minutes) interval makes sense
                     68: clean_ruleset_interval=600
                     69: 
                     70: # log packets in pf
                     71: #packet_log=no
                     72: 
                     73: # ALTQ queue in pf
                     74: # filter rules must be used for this to be used.
                     75: # compile with PF_ENABLE_FILTER_RULES (see config.h file)
                     76: #queue=queue_name1
                     77: 
                     78: # tag name in pf
                     79: #tag=tag_name1
                     80: 
                     81: # make filter rules in pf quick or not. default is yes
                     82: # active when compiled with PF_ENABLE_FILTER_RULES (see config.h file)
                     83: #quickrules=no
                     84: 
                     85: # uuid : generate your own with "make genuuid"
                     86: uuid=fc4ec57e-b051-11db-88f8-0060085db3f6
                     87: 
                     88: # serial and model number the daemon will report to clients
                     89: # in its XML description
                     90: serial=12345678
                     91: model_number=1
                     92: 
                     93: # UPnP permission rules
                     94: # (allow|deny) (external port range) ip/mask (internal port range)
                     95: # A port range is <min port>-<max port> or <port> if there is only
                     96: # one port in the range.
                     97: # ip/mask format must be nn.nn.nn.nn/nn
                     98: # it is advised to only allow redirection of port above 1024
                     99: # and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
                    100: allow 1024-65535 192.168.0.0/24 1024-65535
                    101: allow 1024-65535 192.168.1.0/24 1024-65535
                    102: allow 1024-65535 192.168.0.0/23 22
                    103: allow 12345 192.168.7.113/32 54321
                    104: deny 0-65535 0.0.0.0/0 0-65535
                    105: 

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>