Return to miniupnpd.conf CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / miniupnpd

Annotation of embedaddon/miniupnpd/miniupnpd.conf, revision 1.1.1.2

1.1       misho       1: # WAN network interface
1.1.1.2 ! misho       2: ext_ifname=eth1
        !             3: #ext_ifname=xl1
1.1       misho       4: # if the WAN interface has several IP addresses, you
                      5: # can specify the one to use below
                      6: #ext_ip=
                      7: 
                      8: # LAN network interfaces IPs / networks
                      9: # there can be multiple listening ips for SSDP traffic.
                     10: # should be under the form nnn.nnn.nnn.nnn/nn
1.1.1.2 ! misho      11: # It can also be the network interface name (ie "eth0")
        !            12: # It if mandatory to use the network interface name to enable IPv6
        !            13: # HTTP is available on all interfaces.
1.1       misho      14: # When MULTIPLE_EXTERNAL_IP is enabled, the external ip
                     15: # address associated with the subnet follows. for example :
                     16: #  listening_ip=192.168.0.1/24 88.22.44.13
1.1.1.2 ! misho      17: #listening_ip=192.168.0.1/24
        !            18: listening_ip=192.168.10.109/24
        !            19: #listening_ip=eth0
1.1       misho      20: # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
                     21: port=0
                     22: 
                     23: # path to the unix socket used to communicate with MiniSSDPd
                     24: # If running, MiniSSDPd will manage M-SEARCH answering.
                     25: # default is /var/run/minissdpd.sock
                     26: #minissdpdsocket=/var/run/minissdpd.sock
                     27: 
                     28: # enable NAT-PMP support (default is no)
                     29: enable_natpmp=yes
                     30: 
                     31: # enable UPNP support (default is yes)
                     32: enable_upnp=yes
                     33: 
                     34: # chain names for netfilter (not used for pf or ipf).
                     35: # default is MINIUPNPD for both
                     36: #upnp_forward_chain=forwardUPnP
                     37: #upnp_nat_chain=UPnP
                     38: 
                     39: # lease file location
                     40: #lease_file=/var/log/upnp.leases
                     41: 
1.1.1.2 ! misho      42: # name of this service, default is "`uname -s` Router"
        !            43: #friendly_name=MiniUPnPd router
        !            44: 
1.1       misho      45: # bitrates reported by daemon in bits per second
                     46: bitrate_up=1000000
                     47: bitrate_down=10000000
                     48: 
                     49: # "secure" mode : when enabled, UPnP client are allowed to add mappings only
                     50: # to their IP.
                     51: #secure_mode=yes
                     52: secure_mode=no
                     53: 
                     54: # default presentation url is http address on port 80
                     55: # If set to an empty string, no presentationURL element will appear
                     56: # in the XML description of the device, which prevents MS Windows
                     57: # from displaying an icon in the "Network Connections" panel.
                     58: #presentation_url=http://www.mylan/index.php
                     59: 
                     60: # report system uptime instead of daemon uptime
                     61: system_uptime=yes
                     62: 
                     63: # notify interval in seconds. default is 30 seconds.
                     64: #notify_interval=240
                     65: notify_interval=60
                     66: 
                     67: # unused rules cleaning.
                     68: # never remove any rule before this threshold for the number
                     69: # of redirections is exceeded. default to 20
                     70: #clean_ruleset_threshold=10
                     71: # clean process work interval in seconds. default to 0 (disabled).
                     72: # a 600 seconds (10 minutes) interval makes sense
                     73: clean_ruleset_interval=600
                     74: 
1.1.1.2 ! misho      75: # log packets in pf (default is no)
1.1       misho      76: #packet_log=no
                     77: 
1.1.1.2 ! misho      78: # anchor name in pf (default is miniupnpd)
        !            79: #anchor=miniupnpd
        !            80: 
1.1       misho      81: # ALTQ queue in pf
                     82: # filter rules must be used for this to be used.
                     83: # compile with PF_ENABLE_FILTER_RULES (see config.h file)
                     84: #queue=queue_name1
                     85: 
                     86: # tag name in pf
                     87: #tag=tag_name1
                     88: 
                     89: # make filter rules in pf quick or not. default is yes
                     90: # active when compiled with PF_ENABLE_FILTER_RULES (see config.h file)
                     91: #quickrules=no
                     92: 
                     93: # uuid : generate your own with "make genuuid"
1.1.1.2 ! misho      94: uuid=3d3cec3a-8cf0-11e0-98ee-001a6bd2d07b
1.1       misho      95: 
                     96: # serial and model number the daemon will report to clients
                     97: # in its XML description
                     98: serial=12345678
                     99: model_number=1
                    100: 
                    101: # UPnP permission rules
                    102: # (allow|deny) (external port range) ip/mask (internal port range)
                    103: # A port range is <min port>-<max port> or <port> if there is only
                    104: # one port in the range.
                    105: # ip/mask format must be nn.nn.nn.nn/nn
                    106: # it is advised to only allow redirection of port above 1024
                    107: # and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
                    108: allow 1024-65535 192.168.0.0/24 1024-65535
                    109: allow 1024-65535 192.168.1.0/24 1024-65535
                    110: allow 1024-65535 192.168.0.0/23 22
                    111: allow 12345 192.168.7.113/32 54321
                    112: deny 0-65535 0.0.0.0/0 0-65535
                    113: