# WAN network interface ext_ifname=eth1 #ext_ifname=xl1 # if the WAN interface has several IP addresses, you # can specify the one to use below #ext_ip= # LAN network interfaces IPs / networks # there can be multiple listening ips for SSDP traffic. # should be under the form nnn.nnn.nnn.nnn/nn # It can also be the network interface name (ie "eth0") # It if mandatory to use the network interface name to enable IPv6 # HTTP is available on all interfaces. # When MULTIPLE_EXTERNAL_IP is enabled, the external ip # address associated with the subnet follows. for example : # listening_ip=192.168.0.1/24 88.22.44.13 #listening_ip=192.168.0.1/24 listening_ip=192.168.10.109/24 #listening_ip=eth0 # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect. port=0 # path to the unix socket used to communicate with MiniSSDPd # If running, MiniSSDPd will manage M-SEARCH answering. # default is /var/run/minissdpd.sock #minissdpdsocket=/var/run/minissdpd.sock # enable NAT-PMP support (default is no) enable_natpmp=yes # enable UPNP support (default is yes) enable_upnp=yes # chain names for netfilter (not used for pf or ipf). # default is MINIUPNPD for both #upnp_forward_chain=forwardUPnP #upnp_nat_chain=UPnP # lease file location #lease_file=/var/log/upnp.leases # name of this service, default is "`uname -s` Router" #friendly_name=MiniUPnPd router # bitrates reported by daemon in bits per second bitrate_up=1000000 bitrate_down=10000000 # "secure" mode : when enabled, UPnP client are allowed to add mappings only # to their IP. #secure_mode=yes secure_mode=no # default presentation url is http address on port 80 # If set to an empty string, no presentationURL element will appear # in the XML description of the device, which prevents MS Windows # from displaying an icon in the "Network Connections" panel. #presentation_url=http://www.mylan/index.php # report system uptime instead of daemon uptime system_uptime=yes # notify interval in seconds. default is 30 seconds. #notify_interval=240 notify_interval=60 # unused rules cleaning. # never remove any rule before this threshold for the number # of redirections is exceeded. default to 20 #clean_ruleset_threshold=10 # clean process work interval in seconds. default to 0 (disabled). # a 600 seconds (10 minutes) interval makes sense clean_ruleset_interval=600 # log packets in pf (default is no) #packet_log=no # anchor name in pf (default is miniupnpd) #anchor=miniupnpd # ALTQ queue in pf # filter rules must be used for this to be used. # compile with PF_ENABLE_FILTER_RULES (see config.h file) #queue=queue_name1 # tag name in pf #tag=tag_name1 # make filter rules in pf quick or not. default is yes # active when compiled with PF_ENABLE_FILTER_RULES (see config.h file) #quickrules=no # uuid : generate your own with "make genuuid" uuid=3d3cec3a-8cf0-11e0-98ee-001a6bd2d07b # serial and model number the daemon will report to clients # in its XML description serial=12345678 model_number=1 # UPnP permission rules # (allow|deny) (external port range) ip/mask (internal port range) # A port range is - or if there is only # one port in the range. # ip/mask format must be nn.nn.nn.nn/nn # it is advised to only allow redirection of port above 1024 # and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535" allow 1024-65535 192.168.0.0/24 1024-65535 allow 1024-65535 192.168.1.0/24 1024-65535 allow 1024-65535 192.168.0.0/23 22 allow 12345 192.168.7.113/32 54321 deny 0-65535 0.0.0.0/0 0-65535