[BACK]Return to mpd44.html CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / mpd / doc
File:  [ELWIX - Embedded LightWeight unIX -] / embedaddon / mpd / doc / mpd44.html
Revision 1.1.1.4 (vendor branch): download - view: text, annotated - select for diffs - revision graph
Wed Mar 17 00:39:23 2021 UTC (3 years, 3 months ago) by misho
Branches: mpd, MAIN
CVS tags: v5_9p16, v5_9, HEAD
mpd 5.9

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<TITLE>Netgraph device type commands</TITLE>
</HEAD>
<BODY text="#000000" bgcolor="#ffffff">

<A HREF="mpd.html"><EM>Mpd 5.9 User Manual</EM></A>
 <b>:</b> <A HREF="mpd42.html"><EM>Device Types</EM></A>
 <b>:</b> <EM>Netgraph device type commands</EM><BR>
<b>Previous:</b> <A HREF="mpd43.html"><EM>Modem type commands</EM></A><BR>
<b>Next:</b> <A HREF="mpd45.html"><EM>TCP device type commands</EM></A>


<HR NOSHADE>
  <H2><A NAME="44"></A>5.2. Netgraph device type commands<A NAME="netgraph"></A></H2>
<p>This chapter describes commands that are specific to netgraph type links.
These commands apply to the currently active link, and are only
valid if the currently active link has type <b>ng</b>.</p>
<p>Note that this device type has no direct way to detect a physical layer
disconnection (i.e., what would be analogous to loss of carrier detect)
except by receiving a write error. One way to achieve this is to
insure that when the physical layer goes down, the connection to
the Netgraph hook is broken.</p>
<p>
<dl>

<dt><b><code>set ng node <em>nodepath</em></code></b><dd>
<dt><b><code>set ng hook <em>hook</em></code></b><dd><p>These commands configure which Netgraph node, and which hook on that
node, mpd is supposed to connect to. The node is found via the
absolute Netgraph address <code><em>nodepath</em></code> and must have
a free hook named <code><em>hook</em></code>. Both of these commands
are required.</p>
<p>The hook should be connectable directly to a link hook of the
<code>ng_ppp(3)</code> netgraph node type.  That is, it should be
prepared to transmit and receive PPP frames starting with the
address and control fields (unless compressed), followed by the
PPP protocol number and information fields, but containing no
checksum field.</p>

</dl>
</p>



 <HR NOSHADE>
<A HREF="mpd.html"><EM>Mpd 5.9 User Manual</EM></A>
 <b>:</b> <A HREF="mpd42.html"><EM>Device Types</EM></A>
 <b>:</b> <EM>Netgraph device type commands</EM><BR>
<b>Previous:</b> <A HREF="mpd43.html"><EM>Modem type commands</EM></A><BR>
<b>Next:</b> <A HREF="mpd45.html"><EM>TCP device type commands</EM></A>



</BODY>
</HTML>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>