Annotation of embedaddon/mpd/doc/mpd45.html, revision 1.1.1.4
1.1 misho 1: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
2: <HTML>
3: <HEAD>
4: <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
5: <TITLE>TCP device type commands</TITLE>
6: </HEAD>
7: <BODY text="#000000" bgcolor="#ffffff">
8:
1.1.1.4 ! misho 9: <A HREF="mpd.html"><EM>Mpd 5.9 User Manual</EM></A>
1.1 misho 10: <b>:</b> <A HREF="mpd42.html"><EM>Device Types</EM></A>
11: <b>:</b> <EM>TCP device type commands</EM><BR>
12: <b>Previous:</b> <A HREF="mpd44.html"><EM>Netgraph device type commands</EM></A><BR>
13: <b>Next:</b> <A HREF="mpd46.html"><EM>UDP device type commands</EM></A>
14:
15:
16: <HR NOSHADE>
17: <H2><A NAME="45"></A>5.3. TCP device type commands<A NAME="tcp"></A></H2>
18: <p>This chapter describes commands that are specific to TCP type links.
19: These commands apply to the currently active link, and are only
20: valid if the currently active link has type <b>tcp</b>.</p>
21: <p>Due to limitations of ng_ksocket module this device type have two issues:
22: <ul>
23: <li>when there are no free incoming link, new connection will anyway
24: be acceped and then dropped instead of not accepting it,</li>
25: <li>tcp connection status is not monitored, so you should use
26: 'set link keep-alive' to detect broken links.</li>
27: </ul>
28: </p>
29: <p>
30: <dl>
31:
32: <dt><b><code>set tcp self <em>ipaddr</em> [ <em>port</em> ]</code></b><dd><p>Sets the local IP address and port for the TCP connection.
33: Port field is required for accepting incoming connections.</p>
34:
35: <dt><b><code>set tcp peer <em>ipaddr</em> [ <em>port</em> ]</code></b><dd><p>Sets the peer IP address and port for the TCP connection.
36: Address and port fields are required for outgoing connections.
37: For incoming connections it is not required, but can limit who can connect to us.</p>
38:
39: </dl>
40: </p>
41:
42: <p>The following options are supported:</p>
43: <p>
44: <dl>
45:
46: <dt><b><code>resolve-once</code></b><dd><p>Enables resolving peer address only once, on startup, or on manual
47: typing in CLI.</p>
48: <p>The default is enable.</p>
49:
50: </dl>
51:
52: </p>
53:
54:
55: <HR NOSHADE>
1.1.1.4 ! misho 56: <A HREF="mpd.html"><EM>Mpd 5.9 User Manual</EM></A>
1.1 misho 57: <b>:</b> <A HREF="mpd42.html"><EM>Device Types</EM></A>
58: <b>:</b> <EM>TCP device type commands</EM><BR>
59: <b>Previous:</b> <A HREF="mpd44.html"><EM>Netgraph device type commands</EM></A><BR>
60: <b>Next:</b> <A HREF="mpd46.html"><EM>UDP device type commands</EM></A>
61:
62:
63:
64: </BODY>
65: </HTML>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to mpd45.html CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / mpd / doc