[BACK]Return to mpd45.html CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / mpd / doc
File:  [ELWIX - Embedded LightWeight unIX -] / embedaddon / mpd / doc / mpd45.html
Revision 1.1.1.4 (vendor branch): download - view: text, annotated - select for diffs - revision graph
Wed Mar 17 00:39:23 2021 UTC (3 years, 2 months ago) by misho
Branches: mpd, MAIN
CVS tags: v5_9p16, v5_9, HEAD
mpd 5.9

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<TITLE>TCP device type commands</TITLE>
</HEAD>
<BODY text="#000000" bgcolor="#ffffff">

<A HREF="mpd.html"><EM>Mpd 5.9 User Manual</EM></A>
 <b>:</b> <A HREF="mpd42.html"><EM>Device Types</EM></A>
 <b>:</b> <EM>TCP device type commands</EM><BR>
<b>Previous:</b> <A HREF="mpd44.html"><EM>Netgraph device type commands</EM></A><BR>
<b>Next:</b> <A HREF="mpd46.html"><EM>UDP device type commands</EM></A>


<HR NOSHADE>
  <H2><A NAME="45"></A>5.3. TCP device type commands<A NAME="tcp"></A></H2>
<p>This chapter describes commands that are specific to TCP type links.
These commands apply to the currently active link, and are only
valid if the currently active link has type <b>tcp</b>.</p>
<p>Due to limitations of ng_ksocket module this device type have two issues:
<ul>
<li>when there are no free incoming link, new connection will anyway 
be acceped and then dropped instead of not accepting it,</li>
<li>tcp connection status is not monitored, so you should use 
'set link keep-alive' to detect broken links.</li>
</ul>
</p>
<p>
<dl>

<dt><b><code>set tcp self <em>ipaddr</em> [ <em>port</em> ]</code></b><dd><p>Sets the local IP address and port for the TCP connection.
Port field is required for accepting incoming connections.</p>

<dt><b><code>set tcp peer <em>ipaddr</em> [ <em>port</em> ]</code></b><dd><p>Sets the peer IP address and port for the TCP connection.
Address and port fields are required for outgoing connections.
For incoming connections it is not required, but can limit who can connect to us.</p>

</dl>
</p>

<p>The following options are supported:</p>
<p>
<dl>

<dt><b><code>resolve-once</code></b><dd><p>Enables resolving peer address only once, on startup, or on manual
typing in CLI.</p>
<p>The default is enable.</p>

</dl>

</p>


 <HR NOSHADE>
<A HREF="mpd.html"><EM>Mpd 5.9 User Manual</EM></A>
 <b>:</b> <A HREF="mpd42.html"><EM>Device Types</EM></A>
 <b>:</b> <EM>TCP device type commands</EM><BR>
<b>Previous:</b> <A HREF="mpd44.html"><EM>Netgraph device type commands</EM></A><BR>
<b>Next:</b> <A HREF="mpd46.html"><EM>UDP device type commands</EM></A>



</BODY>
</HTML>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>