--- embedaddon/mtr/Makefile.in	2013/07/21 23:43:42	1.1.1.1
+++ embedaddon/mtr/Makefile.in	2016/11/01 09:33:48	1.1.1.2
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,6 +15,51 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -35,10 +79,10 @@ POST_UNINSTALL = :
 sbin_PROGRAMS = mtr$(EXEEXT)
 @IPINFO_TRUE@am__append_1 = asn.c asn.h
 subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(srcdir)/version.h.in $(top_srcdir)/configure AUTHORS COPYING \
-	NEWS TODO depcomp install-sh missing
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(srcdir)/config.h.in $(srcdir)/version.h.in depcomp AUTHORS \
+	COPYING NEWS README TODO compile install-sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -65,22 +109,48 @@ mtr_OBJECTS = $(am_mtr_OBJECTS) $(nodist_mtr_OBJECTS)
 am__DEPENDENCIES_1 =
 mtr_LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(mtr_LDFLAGS) $(LDFLAGS) -o \
 	$@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
 am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
 LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 SOURCES = $(mtr_SOURCES) $(EXTRA_mtr_SOURCES) $(nodist_mtr_SOURCES)
 DIST_SOURCES = $(am__mtr_SOURCES_DIST) $(EXTRA_mtr_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -102,24 +172,55 @@ am__nobase_list = $(am__nobase_strip_setup); \
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 man8dir = $(mandir)/man8
 NROFF = nroff
 MANS = $(man_MANS)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -147,10 +248,14 @@ am__relativize = \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -169,8 +274,6 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_LIBS = @GLIB_LIBS@
 GREP = @GREP@
 GTK_CFLAGS = @GTK_CFLAGS@
 GTK_LIBS = @GTK_LIBS@
@@ -196,8 +299,6 @@ PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
 RESOLV_LIBS = @RESOLV_LIBS@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
@@ -268,7 +369,7 @@ all: $(BUILT_SOURCES) config.h
 
 .SUFFIXES:
 .SUFFIXES: .c .o .obj
-am--refresh:
+am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
@@ -304,10 +405,8 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -323,14 +422,18 @@ version.h.tmp: $(top_builddir)/config.status $(srcdir)
 	cd $(top_builddir) && $(SHELL) ./config.status $@
 install-sbinPROGRAMS: $(sbin_PROGRAMS)
 	@$(NORMAL_INSTALL)
-	test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
 	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+	fi; \
 	for p in $$list; do echo "$$p $$p"; done | \
 	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
+	while read p p1; do if test -f $$p \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
 	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
 	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 	sed 'N;N;N;s,\n, ,g' | \
 	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@@ -351,16 +454,18 @@ uninstall-sbinPROGRAMS:
 	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 	files=`for p in $$list; do echo "$$p"; done | \
 	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
 	test -n "$$list" || exit 0; \
 	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
 	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
 
 clean-sbinPROGRAMS:
 	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-mtr$(EXEEXT): $(mtr_OBJECTS) $(mtr_DEPENDENCIES) 
+
+mtr$(EXEEXT): $(mtr_OBJECTS) $(mtr_DEPENDENCIES) $(EXTRA_mtr_DEPENDENCIES) 
 	@rm -f mtr$(EXEEXT)
-	$(mtr_LINK) $(mtr_OBJECTS) $(mtr_LDADD) $(LIBS)
+	$(AM_V_CCLD)$(mtr_LINK) $(mtr_OBJECTS) $(mtr_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -383,25 +488,32 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/split.Po@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 install-man8: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
-	@list=''; test -n "$(man8dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.8[a-z]*$$/p'; \
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man8dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.8[a-z]*$$/p'; \
+	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -430,27 +542,28 @@ uninstall-man8:
 	  sed -n '/\.8[a-z]*$$/p'; \
 	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	test -z "$$files" || { \
-	  echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
-	  cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
+	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -465,57 +578,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -531,12 +599,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -548,15 +611,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -565,24 +624,33 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
 
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
 	$(am__remove_distdir)
 	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -616,13 +684,10 @@ distdir: $(DISTFILES)
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -651,36 +716,42 @@ distdir: $(DISTFILES)
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
 
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
 
 dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -691,8 +762,8 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
@@ -702,17 +773,19 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && ../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -735,13 +808,21 @@ distcheck: dist
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -777,10 +858,15 @@ install-am: all-am
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -870,15 +956,14 @@ uninstall-am: uninstall-man uninstall-sbinPROGRAMS
 
 uninstall-man: uninstall-man8
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
-	ctags-recursive install install-am install-exec-am \
-	install-strip tags-recursive
+.MAKE: $(am__recursive_targets) all check install install-am \
+	install-exec-am install-strip
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-am clean clean-generic \
-	clean-sbinPROGRAMS ctags ctags-recursive dist dist-all \
-	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \
-	dist-zip distcheck distclean distclean-compile \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am clean clean-cscope clean-generic \
+	clean-sbinPROGRAMS cscope cscopelist-am ctags ctags-am dist \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-compile \
 	distclean-generic distclean-hdr distclean-local distclean-tags \
 	distcleancheck distdir distuninstallcheck dvi dvi-am html \
 	html-am info info-am install install-am install-data \
@@ -889,8 +974,8 @@ uninstall-man: uninstall-man8
 	install-sbinPROGRAMS install-strip installcheck \
 	installcheck-am installdirs installdirs-am maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am uninstall-man uninstall-man8 \
+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-man uninstall-man8 \
 	uninstall-sbinPROGRAMS
 
 install-exec-hook: