Annotation of embedaddon/mtr/Makefile.in, revision 1.1.1.2
1.1.1.2 ! misho 1: # Makefile.in generated by automake 1.14.1 from Makefile.am.
1.1 misho 2: # @configure_input@
3:
1.1.1.2 ! misho 4: # Copyright (C) 1994-2013 Free Software Foundation, Inc.
! 5:
1.1 misho 6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16:
17: VPATH = @srcdir@
1.1.1.2 ! misho 18: am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
! 19: am__make_running_with_option = \
! 20: case $${target_option-} in \
! 21: ?) ;; \
! 22: *) echo "am__make_running_with_option: internal error: invalid" \
! 23: "target option '$${target_option-}' specified" >&2; \
! 24: exit 1;; \
! 25: esac; \
! 26: has_opt=no; \
! 27: sane_makeflags=$$MAKEFLAGS; \
! 28: if $(am__is_gnu_make); then \
! 29: sane_makeflags=$$MFLAGS; \
! 30: else \
! 31: case $$MAKEFLAGS in \
! 32: *\\[\ \ ]*) \
! 33: bs=\\; \
! 34: sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
! 35: | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
! 36: esac; \
! 37: fi; \
! 38: skip_next=no; \
! 39: strip_trailopt () \
! 40: { \
! 41: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
! 42: }; \
! 43: for flg in $$sane_makeflags; do \
! 44: test $$skip_next = yes && { skip_next=no; continue; }; \
! 45: case $$flg in \
! 46: *=*|--*) continue;; \
! 47: -*I) strip_trailopt 'I'; skip_next=yes;; \
! 48: -*I?*) strip_trailopt 'I';; \
! 49: -*O) strip_trailopt 'O'; skip_next=yes;; \
! 50: -*O?*) strip_trailopt 'O';; \
! 51: -*l) strip_trailopt 'l'; skip_next=yes;; \
! 52: -*l?*) strip_trailopt 'l';; \
! 53: -[dEDm]) skip_next=yes;; \
! 54: -[JT]) skip_next=yes;; \
! 55: esac; \
! 56: case $$flg in \
! 57: *$$target_option*) has_opt=yes; break;; \
! 58: esac; \
! 59: done; \
! 60: test $$has_opt = yes
! 61: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
! 62: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
1.1 misho 63: pkgdatadir = $(datadir)/@PACKAGE@
64: pkgincludedir = $(includedir)/@PACKAGE@
65: pkglibdir = $(libdir)/@PACKAGE@
66: pkglibexecdir = $(libexecdir)/@PACKAGE@
67: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
68: install_sh_DATA = $(install_sh) -c -m 644
69: install_sh_PROGRAM = $(install_sh) -c
70: install_sh_SCRIPT = $(install_sh) -c
71: INSTALL_HEADER = $(INSTALL_DATA)
72: transform = $(program_transform_name)
73: NORMAL_INSTALL = :
74: PRE_INSTALL = :
75: POST_INSTALL = :
76: NORMAL_UNINSTALL = :
77: PRE_UNINSTALL = :
78: POST_UNINSTALL = :
79: sbin_PROGRAMS = mtr$(EXEEXT)
80: @IPINFO_TRUE@am__append_1 = asn.c asn.h
81: subdir = .
1.1.1.2 ! misho 82: DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
! 83: $(top_srcdir)/configure $(am__configure_deps) \
! 84: $(srcdir)/config.h.in $(srcdir)/version.h.in depcomp AUTHORS \
! 85: COPYING NEWS README TODO compile install-sh missing
1.1 misho 86: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
87: am__aclocal_m4_deps = $(top_srcdir)/configure.ac
88: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
89: $(ACLOCAL_M4)
90: am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
91: configure.lineno config.status.lineno
92: mkinstalldirs = $(install_sh) -d
93: CONFIG_HEADER = config.h
94: CONFIG_CLEAN_FILES = version.h.tmp
95: CONFIG_CLEAN_VPATH_FILES =
96: am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
97: PROGRAMS = $(sbin_PROGRAMS)
98: am__mtr_SOURCES_DIST = mtr.c net.c net.h dns.c dns.h raw.c raw.h \
99: split.c split.h display.c display.h report.c report.h getopt.c \
100: getopt1.c getopt.h select.c select.h mtr-curses.h mtr-gtk.h \
101: asn.c asn.h
102: @IPINFO_TRUE@am__objects_1 = asn.$(OBJEXT)
103: am_mtr_OBJECTS = mtr.$(OBJEXT) net.$(OBJEXT) dns.$(OBJEXT) \
104: raw.$(OBJEXT) split.$(OBJEXT) display.$(OBJEXT) \
105: report.$(OBJEXT) getopt.$(OBJEXT) getopt1.$(OBJEXT) \
106: select.$(OBJEXT) $(am__objects_1)
107: nodist_mtr_OBJECTS =
108: mtr_OBJECTS = $(am_mtr_OBJECTS) $(nodist_mtr_OBJECTS)
109: am__DEPENDENCIES_1 =
110: mtr_LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(mtr_LDFLAGS) $(LDFLAGS) -o \
111: $@
1.1.1.2 ! misho 112: AM_V_P = $(am__v_P_@AM_V@)
! 113: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
! 114: am__v_P_0 = false
! 115: am__v_P_1 = :
! 116: AM_V_GEN = $(am__v_GEN_@AM_V@)
! 117: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
! 118: am__v_GEN_0 = @echo " GEN " $@;
! 119: am__v_GEN_1 =
! 120: AM_V_at = $(am__v_at_@AM_V@)
! 121: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
! 122: am__v_at_0 = @
! 123: am__v_at_1 =
1.1 misho 124: depcomp = $(SHELL) $(top_srcdir)/depcomp
125: am__depfiles_maybe = depfiles
126: am__mv = mv -f
127: COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
128: $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
1.1.1.2 ! misho 129: AM_V_CC = $(am__v_CC_@AM_V@)
! 130: am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
! 131: am__v_CC_0 = @echo " CC " $@;
! 132: am__v_CC_1 =
1.1 misho 133: CCLD = $(CC)
134: LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
1.1.1.2 ! misho 135: AM_V_CCLD = $(am__v_CCLD_@AM_V@)
! 136: am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
! 137: am__v_CCLD_0 = @echo " CCLD " $@;
! 138: am__v_CCLD_1 =
1.1 misho 139: SOURCES = $(mtr_SOURCES) $(EXTRA_mtr_SOURCES) $(nodist_mtr_SOURCES)
140: DIST_SOURCES = $(am__mtr_SOURCES_DIST) $(EXTRA_mtr_SOURCES)
1.1.1.2 ! misho 141: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
! 142: ctags-recursive dvi-recursive html-recursive info-recursive \
! 143: install-data-recursive install-dvi-recursive \
! 144: install-exec-recursive install-html-recursive \
! 145: install-info-recursive install-pdf-recursive \
! 146: install-ps-recursive install-recursive installcheck-recursive \
! 147: installdirs-recursive pdf-recursive ps-recursive \
! 148: tags-recursive uninstall-recursive
! 149: am__can_run_installinfo = \
! 150: case $$AM_UPDATE_INFO_DIR in \
! 151: n|no|NO) false;; \
! 152: *) (install-info --version) >/dev/null 2>&1;; \
! 153: esac
1.1 misho 154: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
155: am__vpath_adj = case $$p in \
156: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
157: *) f=$$p;; \
158: esac;
159: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
160: am__install_max = 40
161: am__nobase_strip_setup = \
162: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
163: am__nobase_strip = \
164: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
165: am__nobase_list = $(am__nobase_strip_setup); \
166: for p in $$list; do echo "$$p $$p"; done | \
167: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
168: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
169: if (++n[$$2] == $(am__install_max)) \
170: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
171: END { for (dir in files) print dir, files[dir] }'
172: am__base_list = \
173: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
174: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
1.1.1.2 ! misho 175: am__uninstall_files_from_dir = { \
! 176: test -z "$$files" \
! 177: || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
! 178: || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
! 179: $(am__cd) "$$dir" && rm -f $$files; }; \
! 180: }
1.1 misho 181: man8dir = $(mandir)/man8
182: NROFF = nroff
183: MANS = $(man_MANS)
184: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
185: distclean-recursive maintainer-clean-recursive
1.1.1.2 ! misho 186: am__recursive_targets = \
! 187: $(RECURSIVE_TARGETS) \
! 188: $(RECURSIVE_CLEAN_TARGETS) \
! 189: $(am__extra_recursive_targets)
! 190: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
! 191: cscope distdir dist dist-all distcheck
! 192: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
! 193: $(LISP)config.h.in
! 194: # Read a list of newline-separated strings from the standard input,
! 195: # and print each of them once, without duplicates. Input order is
! 196: # *not* preserved.
! 197: am__uniquify_input = $(AWK) '\
! 198: BEGIN { nonempty = 0; } \
! 199: { items[$$0] = 1; nonempty = 1; } \
! 200: END { if (nonempty) { for (i in items) print i; }; } \
! 201: '
! 202: # Make sure the list of sources is unique. This is necessary because,
! 203: # e.g., the same source file might be shared among _SOURCES variables
! 204: # for different programs/libraries.
! 205: am__define_uniq_tagged_files = \
! 206: list='$(am__tagged_files)'; \
! 207: unique=`for i in $$list; do \
! 208: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 209: done | $(am__uniquify_input)`
1.1 misho 210: ETAGS = etags
211: CTAGS = ctags
1.1.1.2 ! misho 212: CSCOPE = cscope
1.1 misho 213: DIST_SUBDIRS = $(SUBDIRS)
214: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
215: distdir = $(PACKAGE)-$(VERSION)
216: top_distdir = $(distdir)
217: am__remove_distdir = \
1.1.1.2 ! misho 218: if test -d "$(distdir)"; then \
! 219: find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
! 220: && rm -rf "$(distdir)" \
! 221: || { sleep 5 && rm -rf "$(distdir)"; }; \
! 222: else :; fi
! 223: am__post_remove_distdir = $(am__remove_distdir)
1.1 misho 224: am__relativize = \
225: dir0=`pwd`; \
226: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
227: sed_rest='s,^[^/]*/*,,'; \
228: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
229: sed_butlast='s,/*[^/]*$$,,'; \
230: while test -n "$$dir1"; do \
231: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
232: if test "$$first" != "."; then \
233: if test "$$first" = ".."; then \
234: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
235: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
236: else \
237: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
238: if test "$$first2" = "$$first"; then \
239: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
240: else \
241: dir2="../$$dir2"; \
242: fi; \
243: dir0="$$dir0"/"$$first"; \
244: fi; \
245: fi; \
246: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
247: done; \
248: reldir="$$dir2"
249: DIST_ARCHIVES = $(distdir).tar.gz
250: GZIP_ENV = --best
1.1.1.2 ! misho 251: DIST_TARGETS = dist-gzip
1.1 misho 252: distuninstallcheck_listfiles = find . -type f -print
1.1.1.2 ! misho 253: am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
! 254: | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
1.1 misho 255: distcleancheck_listfiles = find . -type f -print
256: ACLOCAL = @ACLOCAL@
257: AMTAR = @AMTAR@
1.1.1.2 ! misho 258: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
1.1 misho 259: AUTOCONF = @AUTOCONF@
260: AUTOHEADER = @AUTOHEADER@
261: AUTOMAKE = @AUTOMAKE@
262: AWK = @AWK@
263: CC = @CC@
264: CCDEPMODE = @CCDEPMODE@
265: CFLAGS = @CFLAGS@
266: CPP = @CPP@
267: CPPFLAGS = @CPPFLAGS@
268: CURSES_OBJ = @CURSES_OBJ@
269: CYGPATH_W = @CYGPATH_W@
270: DEFS = @DEFS@
271: DEPDIR = @DEPDIR@
272: ECHO_C = @ECHO_C@
273: ECHO_N = @ECHO_N@
274: ECHO_T = @ECHO_T@
275: EGREP = @EGREP@
276: EXEEXT = @EXEEXT@
277: GREP = @GREP@
278: GTK_CFLAGS = @GTK_CFLAGS@
279: GTK_LIBS = @GTK_LIBS@
280: GTK_OBJ = @GTK_OBJ@
281: INSTALL = @INSTALL@
282: INSTALL_DATA = @INSTALL_DATA@
283: INSTALL_PROGRAM = @INSTALL_PROGRAM@
284: INSTALL_SCRIPT = @INSTALL_SCRIPT@
285: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
286: LDFLAGS = @LDFLAGS@
287: LIBOBJS = @LIBOBJS@
288: LIBS = @LIBS@
289: LTLIBOBJS = @LTLIBOBJS@
290: MAKEINFO = @MAKEINFO@
291: MKDIR_P = @MKDIR_P@
292: OBJEXT = @OBJEXT@
293: PACKAGE = @PACKAGE@
294: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
295: PACKAGE_NAME = @PACKAGE_NAME@
296: PACKAGE_STRING = @PACKAGE_STRING@
297: PACKAGE_TARNAME = @PACKAGE_TARNAME@
298: PACKAGE_URL = @PACKAGE_URL@
299: PACKAGE_VERSION = @PACKAGE_VERSION@
300: PATH_SEPARATOR = @PATH_SEPARATOR@
301: PKG_CONFIG = @PKG_CONFIG@
302: RESOLV_LIBS = @RESOLV_LIBS@
303: SET_MAKE = @SET_MAKE@
304: SHELL = @SHELL@
305: STRIP = @STRIP@
306: VERSION = @VERSION@
307: abs_builddir = @abs_builddir@
308: abs_srcdir = @abs_srcdir@
309: abs_top_builddir = @abs_top_builddir@
310: abs_top_srcdir = @abs_top_srcdir@
311: ac_ct_CC = @ac_ct_CC@
312: am__include = @am__include@
313: am__leading_dot = @am__leading_dot@
314: am__quote = @am__quote@
315: am__tar = @am__tar@
316: am__untar = @am__untar@
317: bindir = @bindir@
318: build_alias = @build_alias@
319: builddir = @builddir@
320: datadir = @datadir@
321: datarootdir = @datarootdir@
322: docdir = @docdir@
323: dvidir = @dvidir@
324: exec_prefix = @exec_prefix@
325: host_alias = @host_alias@
326: htmldir = @htmldir@
327: includedir = @includedir@
328: infodir = @infodir@
329: install_sh = @install_sh@
330: libdir = @libdir@
331: libexecdir = @libexecdir@
332: localedir = @localedir@
333: localstatedir = @localstatedir@
334: mandir = @mandir@
335: mkdir_p = @mkdir_p@
336: oldincludedir = @oldincludedir@
337: pdfdir = @pdfdir@
338: prefix = @prefix@
339: program_transform_name = @program_transform_name@
340: psdir = @psdir@
341: sbindir = @sbindir@
342: sharedstatedir = @sharedstatedir@
343: srcdir = @srcdir@
344: sysconfdir = @sysconfdir@
345: target_alias = @target_alias@
346: top_build_prefix = @top_build_prefix@
347: top_builddir = @top_builddir@
348: top_srcdir = @top_srcdir@
349: SUBDIRS = img
350: man_MANS = mtr.8
351: mtr_SOURCES = mtr.c net.c net.h dns.c dns.h raw.c raw.h split.c \
352: split.h display.c display.h report.c report.h getopt.c \
353: getopt1.c getopt.h select.c select.h mtr-curses.h mtr-gtk.h \
354: $(am__append_1)
355: nodist_mtr_SOURCES = version.h
356: EXTRA_mtr_SOURCES = curses.c \
357: gtk.c
358:
359: DEFAULT_INCLUDES = $(GLIB_CFLAGS) -I.
360: mtr_DEPENDENCIES = $(GTK_OBJ) $(CURSES_OBJ)
361: mtr_LDFLAGS = $(GTK_OBJ) $(CURSES_OBJ)
362: mtr_LDADD = $(GLIB_LIBS) $(RESOLV_LIBS)
363: CLEANFILES = version.h
364: BUILT_SOURCES = version.h
365: EXTRA_DIST = SECURITY mtr.8 Makefile Makefile.dist
366: DISTCLEANFILES = *~
367: all: $(BUILT_SOURCES) config.h
368: $(MAKE) $(AM_MAKEFLAGS) all-recursive
369:
370: .SUFFIXES:
371: .SUFFIXES: .c .o .obj
1.1.1.2 ! misho 372: am--refresh: Makefile
1.1 misho 373: @:
374: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
375: @for dep in $?; do \
376: case '$(am__configure_deps)' in \
377: *$$dep*) \
378: echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
379: $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
380: && exit 0; \
381: exit 1;; \
382: esac; \
383: done; \
384: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
385: $(am__cd) $(top_srcdir) && \
386: $(AUTOMAKE) --foreign Makefile
387: .PRECIOUS: Makefile
388: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
389: @case '$?' in \
390: *config.status*) \
391: echo ' $(SHELL) ./config.status'; \
392: $(SHELL) ./config.status;; \
393: *) \
394: echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
395: cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
396: esac;
397:
398: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
399: $(SHELL) ./config.status --recheck
400:
401: $(top_srcdir)/configure: $(am__configure_deps)
402: $(am__cd) $(srcdir) && $(AUTOCONF)
403: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
404: $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
405: $(am__aclocal_m4_deps):
406:
407: config.h: stamp-h1
1.1.1.2 ! misho 408: @test -f $@ || rm -f stamp-h1
! 409: @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
1.1 misho 410:
411: stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
412: @rm -f stamp-h1
413: cd $(top_builddir) && $(SHELL) ./config.status config.h
414: $(srcdir)/config.h.in: $(am__configure_deps)
415: ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
416: rm -f stamp-h1
417: touch $@
418:
419: distclean-hdr:
420: -rm -f config.h stamp-h1
421: version.h.tmp: $(top_builddir)/config.status $(srcdir)/version.h.in
422: cd $(top_builddir) && $(SHELL) ./config.status $@
423: install-sbinPROGRAMS: $(sbin_PROGRAMS)
424: @$(NORMAL_INSTALL)
425: @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
1.1.1.2 ! misho 426: if test -n "$$list"; then \
! 427: echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
! 428: $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
! 429: fi; \
1.1 misho 430: for p in $$list; do echo "$$p $$p"; done | \
431: sed 's/$(EXEEXT)$$//' | \
1.1.1.2 ! misho 432: while read p p1; do if test -f $$p \
! 433: ; then echo "$$p"; echo "$$p"; else :; fi; \
1.1 misho 434: done | \
1.1.1.2 ! misho 435: sed -e 'p;s,.*/,,;n;h' \
! 436: -e 's|.*|.|' \
1.1 misho 437: -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
438: sed 'N;N;N;s,\n, ,g' | \
439: $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
440: { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
441: if ($$2 == $$4) files[d] = files[d] " " $$1; \
442: else { print "f", $$3 "/" $$4, $$1; } } \
443: END { for (d in files) print "f", d, files[d] }' | \
444: while read type dir files; do \
445: if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
446: test -z "$$files" || { \
447: echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
448: $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
449: } \
450: ; done
451:
452: uninstall-sbinPROGRAMS:
453: @$(NORMAL_UNINSTALL)
454: @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
455: files=`for p in $$list; do echo "$$p"; done | \
456: sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
1.1.1.2 ! misho 457: -e 's/$$/$(EXEEXT)/' \
! 458: `; \
1.1 misho 459: test -n "$$list" || exit 0; \
460: echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
461: cd "$(DESTDIR)$(sbindir)" && rm -f $$files
462:
463: clean-sbinPROGRAMS:
464: -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
1.1.1.2 ! misho 465:
! 466: mtr$(EXEEXT): $(mtr_OBJECTS) $(mtr_DEPENDENCIES) $(EXTRA_mtr_DEPENDENCIES)
1.1 misho 467: @rm -f mtr$(EXEEXT)
1.1.1.2 ! misho 468: $(AM_V_CCLD)$(mtr_LINK) $(mtr_OBJECTS) $(mtr_LDADD) $(LIBS)
1.1 misho 469:
470: mostlyclean-compile:
471: -rm -f *.$(OBJEXT)
472:
473: distclean-compile:
474: -rm -f *.tab.c
475:
476: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/asn.Po@am__quote@
477: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/curses.Po@am__quote@
478: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/display.Po@am__quote@
479: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dns.Po@am__quote@
480: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
481: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
482: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtk.Po@am__quote@
483: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mtr.Po@am__quote@
484: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net.Po@am__quote@
485: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/raw.Po@am__quote@
486: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/report.Po@am__quote@
487: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/select.Po@am__quote@
488: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/split.Po@am__quote@
489:
490: .c.o:
1.1.1.2 ! misho 491: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
! 492: @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
! 493: @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
1.1 misho 494: @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
1.1.1.2 ! misho 495: @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
1.1 misho 496:
497: .c.obj:
1.1.1.2 ! misho 498: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
! 499: @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
! 500: @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
1.1 misho 501: @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
1.1.1.2 ! misho 502: @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
1.1 misho 503: install-man8: $(man_MANS)
504: @$(NORMAL_INSTALL)
1.1.1.2 ! misho 505: @list1=''; \
! 506: list2='$(man_MANS)'; \
! 507: test -n "$(man8dir)" \
! 508: && test -n "`echo $$list1$$list2`" \
! 509: || exit 0; \
! 510: echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
! 511: $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
! 512: { for i in $$list1; do echo "$$i"; done; \
! 513: if test -n "$$list2"; then \
! 514: for i in $$list2; do echo "$$i"; done \
! 515: | sed -n '/\.8[a-z]*$$/p'; \
! 516: fi; \
1.1 misho 517: } | while read p; do \
518: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
519: echo "$$d$$p"; echo "$$p"; \
520: done | \
521: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
522: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
523: sed 'N;N;s,\n, ,g' | { \
524: list=; while read file base inst; do \
525: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
526: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
527: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
528: fi; \
529: done; \
530: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
531: while read files; do \
532: test -z "$$files" || { \
533: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
534: $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
535: done; }
536:
537: uninstall-man8:
538: @$(NORMAL_UNINSTALL)
539: @list=''; test -n "$(man8dir)" || exit 0; \
540: files=`{ for i in $$list; do echo "$$i"; done; \
541: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
542: sed -n '/\.8[a-z]*$$/p'; \
543: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
544: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
1.1.1.2 ! misho 545: dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
1.1 misho 546:
547: # This directory's subdirectories are mostly independent; you can cd
1.1.1.2 ! misho 548: # into them and run 'make' without going through this Makefile.
! 549: # To change the values of 'make' variables: instead of editing Makefiles,
! 550: # (1) if the variable is set in 'config.status', edit 'config.status'
! 551: # (which will cause the Makefiles to be regenerated when you run 'make');
! 552: # (2) otherwise, pass the desired values on the 'make' command line.
! 553: $(am__recursive_targets):
! 554: @fail=; \
! 555: if $(am__make_keepgoing); then \
! 556: failcom='fail=yes'; \
! 557: else \
! 558: failcom='exit 1'; \
! 559: fi; \
1.1 misho 560: dot_seen=no; \
561: target=`echo $@ | sed s/-recursive//`; \
1.1.1.2 ! misho 562: case "$@" in \
! 563: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 564: *) list='$(SUBDIRS)' ;; \
! 565: esac; \
! 566: for subdir in $$list; do \
1.1 misho 567: echo "Making $$target in $$subdir"; \
568: if test "$$subdir" = "."; then \
569: dot_seen=yes; \
570: local_target="$$target-am"; \
571: else \
572: local_target="$$target"; \
573: fi; \
574: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
575: || eval $$failcom; \
576: done; \
577: if test "$$dot_seen" = "no"; then \
578: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
579: fi; test -z "$$fail"
580:
1.1.1.2 ! misho 581: ID: $(am__tagged_files)
! 582: $(am__define_uniq_tagged_files); mkid -fID $$unique
! 583: tags: tags-recursive
! 584: TAGS: tags
1.1 misho 585:
1.1.1.2 ! misho 586: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
1.1 misho 587: set x; \
588: here=`pwd`; \
589: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
590: include_option=--etags-include; \
591: empty_fix=.; \
592: else \
593: include_option=--include; \
594: empty_fix=; \
595: fi; \
596: list='$(SUBDIRS)'; for subdir in $$list; do \
597: if test "$$subdir" = .; then :; else \
598: test ! -f $$subdir/TAGS || \
599: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
600: fi; \
601: done; \
1.1.1.2 ! misho 602: $(am__define_uniq_tagged_files); \
1.1 misho 603: shift; \
604: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
605: test -n "$$unique" || unique=$$empty_fix; \
606: if test $$# -gt 0; then \
607: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
608: "$$@" $$unique; \
609: else \
610: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
611: $$unique; \
612: fi; \
613: fi
1.1.1.2 ! misho 614: ctags: ctags-recursive
! 615:
! 616: CTAGS: ctags
! 617: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
! 618: $(am__define_uniq_tagged_files); \
1.1 misho 619: test -z "$(CTAGS_ARGS)$$unique" \
620: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
621: $$unique
622:
623: GTAGS:
624: here=`$(am__cd) $(top_builddir) && pwd` \
625: && $(am__cd) $(top_srcdir) \
626: && gtags -i $(GTAGS_ARGS) "$$here"
1.1.1.2 ! misho 627: cscope: cscope.files
! 628: test ! -s cscope.files \
! 629: || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
! 630: clean-cscope:
! 631: -rm -f cscope.files
! 632: cscope.files: clean-cscope cscopelist
! 633: cscopelist: cscopelist-recursive
! 634:
! 635: cscopelist-am: $(am__tagged_files)
! 636: list='$(am__tagged_files)'; \
! 637: case "$(srcdir)" in \
! 638: [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
! 639: *) sdir=$(subdir)/$(srcdir) ;; \
! 640: esac; \
! 641: for i in $$list; do \
! 642: if test -f "$$i"; then \
! 643: echo "$(subdir)/$$i"; \
! 644: else \
! 645: echo "$$sdir/$$i"; \
! 646: fi; \
! 647: done >> $(top_builddir)/cscope.files
1.1 misho 648:
649: distclean-tags:
650: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1.1.1.2 ! misho 651: -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
1.1 misho 652:
653: distdir: $(DISTFILES)
654: $(am__remove_distdir)
655: test -d "$(distdir)" || mkdir "$(distdir)"
656: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
657: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
658: list='$(DISTFILES)'; \
659: dist_files=`for file in $$list; do echo $$file; done | \
660: sed -e "s|^$$srcdirstrip/||;t" \
661: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
662: case $$dist_files in \
663: */*) $(MKDIR_P) `echo "$$dist_files" | \
664: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
665: sort -u` ;; \
666: esac; \
667: for file in $$dist_files; do \
668: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
669: if test -d $$d/$$file; then \
670: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
671: if test -d "$(distdir)/$$file"; then \
672: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
673: fi; \
674: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
675: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
676: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
677: fi; \
678: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
679: else \
680: test -f "$(distdir)/$$file" \
681: || cp -p $$d/$$file "$(distdir)/$$file" \
682: || exit 1; \
683: fi; \
684: done
685: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
686: if test "$$subdir" = .; then :; else \
1.1.1.2 ! misho 687: $(am__make_dryrun) \
! 688: || test -d "$(distdir)/$$subdir" \
! 689: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 690: || exit 1; \
1.1 misho 691: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
692: $(am__relativize); \
693: new_distdir=$$reldir; \
694: dir1=$$subdir; dir2="$(top_distdir)"; \
695: $(am__relativize); \
696: new_top_distdir=$$reldir; \
697: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
698: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
699: ($(am__cd) $$subdir && \
700: $(MAKE) $(AM_MAKEFLAGS) \
701: top_distdir="$$new_top_distdir" \
702: distdir="$$new_distdir" \
703: am__remove_distdir=: \
704: am__skip_length_check=: \
705: am__skip_mode_fix=: \
706: distdir) \
707: || exit 1; \
708: fi; \
709: done
710: -test -n "$(am__skip_mode_fix)" \
711: || find "$(distdir)" -type d ! -perm -755 \
712: -exec chmod u+rwx,go+rx {} \; -o \
713: ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
714: ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
715: ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
716: || chmod -R a+r "$(distdir)"
717: dist-gzip: distdir
718: tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1.1.1.2 ! misho 719: $(am__post_remove_distdir)
1.1 misho 720:
721: dist-bzip2: distdir
1.1.1.2 ! misho 722: tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
! 723: $(am__post_remove_distdir)
1.1 misho 724:
1.1.1.2 ! misho 725: dist-lzip: distdir
! 726: tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
! 727: $(am__post_remove_distdir)
1.1 misho 728:
729: dist-xz: distdir
1.1.1.2 ! misho 730: tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
! 731: $(am__post_remove_distdir)
1.1 misho 732:
733: dist-tarZ: distdir
1.1.1.2 ! misho 734: @echo WARNING: "Support for shar distribution archives is" \
! 735: "deprecated." >&2
! 736: @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1.1 misho 737: tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1.1.1.2 ! misho 738: $(am__post_remove_distdir)
1.1 misho 739:
740: dist-shar: distdir
1.1.1.2 ! misho 741: @echo WARNING: "Support for distribution archives compressed with" \
! 742: "legacy program 'compress' is deprecated." >&2
! 743: @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1.1 misho 744: shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1.1.1.2 ! misho 745: $(am__post_remove_distdir)
1.1 misho 746:
747: dist-zip: distdir
748: -rm -f $(distdir).zip
749: zip -rq $(distdir).zip $(distdir)
1.1.1.2 ! misho 750: $(am__post_remove_distdir)
1.1 misho 751:
1.1.1.2 ! misho 752: dist dist-all:
! 753: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
! 754: $(am__post_remove_distdir)
1.1 misho 755:
756: # This target untars the dist file and tries a VPATH configuration. Then
757: # it guarantees that the distribution is self-contained by making another
758: # tarfile.
759: distcheck: dist
760: case '$(DIST_ARCHIVES)' in \
761: *.tar.gz*) \
762: GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
763: *.tar.bz2*) \
764: bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
1.1.1.2 ! misho 765: *.tar.lz*) \
! 766: lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
1.1 misho 767: *.tar.xz*) \
768: xz -dc $(distdir).tar.xz | $(am__untar) ;;\
769: *.tar.Z*) \
770: uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
771: *.shar.gz*) \
772: GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
773: *.zip*) \
774: unzip $(distdir).zip ;;\
775: esac
1.1.1.2 ! misho 776: chmod -R a-w $(distdir)
! 777: chmod u+w $(distdir)
! 778: mkdir $(distdir)/_build $(distdir)/_inst
1.1 misho 779: chmod a-w $(distdir)
780: test -d $(distdir)/_build || exit 0; \
781: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
782: && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
783: && am__cwd=`pwd` \
784: && $(am__cd) $(distdir)/_build \
1.1.1.2 ! misho 785: && ../configure \
! 786: $(AM_DISTCHECK_CONFIGURE_FLAGS) \
1.1 misho 787: $(DISTCHECK_CONFIGURE_FLAGS) \
1.1.1.2 ! misho 788: --srcdir=.. --prefix="$$dc_install_base" \
1.1 misho 789: && $(MAKE) $(AM_MAKEFLAGS) \
790: && $(MAKE) $(AM_MAKEFLAGS) dvi \
791: && $(MAKE) $(AM_MAKEFLAGS) check \
792: && $(MAKE) $(AM_MAKEFLAGS) install \
793: && $(MAKE) $(AM_MAKEFLAGS) installcheck \
794: && $(MAKE) $(AM_MAKEFLAGS) uninstall \
795: && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
796: distuninstallcheck \
797: && chmod -R a-w "$$dc_install_base" \
798: && ({ \
799: (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
800: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
801: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
802: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
803: distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
804: } || { rm -rf "$$dc_destdir"; exit 1; }) \
805: && rm -rf "$$dc_destdir" \
806: && $(MAKE) $(AM_MAKEFLAGS) dist \
807: && rm -rf $(DIST_ARCHIVES) \
808: && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
809: && cd "$$am__cwd" \
810: || exit 1
1.1.1.2 ! misho 811: $(am__post_remove_distdir)
1.1 misho 812: @(echo "$(distdir) archives ready for distribution: "; \
813: list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
814: sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
815: distuninstallcheck:
1.1.1.2 ! misho 816: @test -n '$(distuninstallcheck_dir)' || { \
! 817: echo 'ERROR: trying to run $@ with an empty' \
! 818: '$$(distuninstallcheck_dir)' >&2; \
! 819: exit 1; \
! 820: }; \
! 821: $(am__cd) '$(distuninstallcheck_dir)' || { \
! 822: echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
! 823: exit 1; \
! 824: }; \
! 825: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
1.1 misho 826: || { echo "ERROR: files left after uninstall:" ; \
827: if test -n "$(DESTDIR)"; then \
828: echo " (check DESTDIR support)"; \
829: fi ; \
830: $(distuninstallcheck_listfiles) ; \
831: exit 1; } >&2
832: distcleancheck: distclean
833: @if test '$(srcdir)' = . ; then \
834: echo "ERROR: distcleancheck can only run from a VPATH build" ; \
835: exit 1 ; \
836: fi
837: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
838: || { echo "ERROR: files left in build directory after distclean:" ; \
839: $(distcleancheck_listfiles) ; \
840: exit 1; } >&2
841: check-am: all-am
842: check: $(BUILT_SOURCES)
843: $(MAKE) $(AM_MAKEFLAGS) check-recursive
844: all-am: Makefile $(PROGRAMS) $(MANS) config.h
845: installdirs: installdirs-recursive
846: installdirs-am:
847: for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
848: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
849: done
850: install: $(BUILT_SOURCES)
851: $(MAKE) $(AM_MAKEFLAGS) install-recursive
852: install-exec: install-exec-recursive
853: install-data: install-data-recursive
854: uninstall: uninstall-recursive
855:
856: install-am: all-am
857: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
858:
859: installcheck: installcheck-recursive
860: install-strip:
1.1.1.2 ! misho 861: if test -z '$(STRIP)'; then \
! 862: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 863: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 864: install; \
! 865: else \
! 866: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 867: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 868: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
! 869: fi
1.1 misho 870: mostlyclean-generic:
871:
872: clean-generic:
873: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
874:
875: distclean-generic:
876: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
877: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
878: -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
879:
880: maintainer-clean-generic:
881: @echo "This command is intended for maintainers to use"
882: @echo "it deletes files that may require special tools to rebuild."
883: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
884: clean: clean-recursive
885:
886: clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
887:
888: distclean: distclean-recursive
889: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
890: -rm -rf ./$(DEPDIR)
891: -rm -f Makefile
892: distclean-am: clean-am distclean-compile distclean-generic \
893: distclean-hdr distclean-local distclean-tags
894:
895: dvi: dvi-recursive
896:
897: dvi-am:
898:
899: html: html-recursive
900:
901: html-am:
902:
903: info: info-recursive
904:
905: info-am:
906:
907: install-data-am: install-man
908:
909: install-dvi: install-dvi-recursive
910:
911: install-dvi-am:
912:
913: install-exec-am: install-sbinPROGRAMS
914: @$(NORMAL_INSTALL)
915: $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
916: install-html: install-html-recursive
917:
918: install-html-am:
919:
920: install-info: install-info-recursive
921:
922: install-info-am:
923:
924: install-man: install-man8
925:
926: install-pdf: install-pdf-recursive
927:
928: install-pdf-am:
929:
930: install-ps: install-ps-recursive
931:
932: install-ps-am:
933:
934: installcheck-am:
935:
936: maintainer-clean: maintainer-clean-recursive
937: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
938: -rm -rf $(top_srcdir)/autom4te.cache
939: -rm -rf ./$(DEPDIR)
940: -rm -f Makefile
941: maintainer-clean-am: distclean-am maintainer-clean-generic
942:
943: mostlyclean: mostlyclean-recursive
944:
945: mostlyclean-am: mostlyclean-compile mostlyclean-generic
946:
947: pdf: pdf-recursive
948:
949: pdf-am:
950:
951: ps: ps-recursive
952:
953: ps-am:
954:
955: uninstall-am: uninstall-man uninstall-sbinPROGRAMS
956:
957: uninstall-man: uninstall-man8
958:
1.1.1.2 ! misho 959: .MAKE: $(am__recursive_targets) all check install install-am \
! 960: install-exec-am install-strip
! 961:
! 962: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
! 963: am--refresh check check-am clean clean-cscope clean-generic \
! 964: clean-sbinPROGRAMS cscope cscopelist-am ctags ctags-am dist \
! 965: dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
! 966: dist-xz dist-zip distcheck distclean distclean-compile \
1.1 misho 967: distclean-generic distclean-hdr distclean-local distclean-tags \
968: distcleancheck distdir distuninstallcheck dvi dvi-am html \
969: html-am info info-am install install-am install-data \
970: install-data-am install-dvi install-dvi-am install-exec \
971: install-exec-am install-exec-hook install-html install-html-am \
972: install-info install-info-am install-man install-man8 \
973: install-pdf install-pdf-am install-ps install-ps-am \
974: install-sbinPROGRAMS install-strip installcheck \
975: installcheck-am installdirs installdirs-am maintainer-clean \
976: maintainer-clean-generic mostlyclean mostlyclean-compile \
1.1.1.2 ! misho 977: mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
! 978: uninstall-am uninstall-man uninstall-man8 \
1.1 misho 979: uninstall-sbinPROGRAMS
980:
981: install-exec-hook:
982: chmod u+s $(DESTDIR)$(sbindir)/mtr
983:
984: version.h: version.h.tmp Makefile $(mtr_SOURCES)
985: @cat version.h.tmp > $@; \
986: if [ -d .git ] && [ -n "$$(which git)" ]; then \
987: xver="+git:$$(git rev-list -n1 --abbrev=8 --abbrev-commit HEAD)"; \
988: sed \
989: -e "/#define *MTR_VERSION */{s/\"\([^\"]*\)\"/\"\1$$xver\"/;}" \
990: version.h.tmp > $@; \
991: fi;
992: distclean-local:
993: (sleep 3; cp Makefile.dist Makefile) &
994: rm -f *.orig
995:
996: # Tell versions [3.59,3.63) of GNU make to not export all variables.
997: # Otherwise a system limit (for SysV at least) may be exceeded.
998: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / mtr