Annotation of embedaddon/mtr/autom4te.cache/traces.0, revision 1.1
1.1 ! misho 1: m4trace:/usr/local/share/aclocal/gtk-2.0.m4:8: -1- AC_DEFUN([AM_PATH_GTK_2_0], [dnl
! 2: dnl Get the cflags and libraries from pkg-config
! 3: dnl
! 4: AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program],
! 5: , enable_gtktest=yes)
! 6:
! 7: pkg_config_args=gtk+-2.0
! 8: for module in . $4
! 9: do
! 10: case "$module" in
! 11: gthread)
! 12: pkg_config_args="$pkg_config_args gthread-2.0"
! 13: ;;
! 14: esac
! 15: done
! 16:
! 17: no_gtk=""
! 18:
! 19: AC_REQUIRE([PKG_PROG_PKG_CONFIG])
! 20: PKG_PROG_PKG_CONFIG([0.7])
! 21:
! 22: min_gtk_version=ifelse([$1], ,2.0.0,$1)
! 23: AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)
! 24:
! 25: if test x$PKG_CONFIG != xno ; then
! 26: ## don't try to run the test against uninstalled libtool libs
! 27: if $PKG_CONFIG --uninstalled $pkg_config_args; then
! 28: echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
! 29: enable_gtktest=no
! 30: fi
! 31:
! 32: if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
! 33: :
! 34: else
! 35: no_gtk=yes
! 36: fi
! 37: fi
! 38:
! 39: if test x"$no_gtk" = x ; then
! 40: GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
! 41: GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
! 42: gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
! 43: sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
! 44: gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
! 45: sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
! 46: gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
! 47: sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
! 48: if test "x$enable_gtktest" = "xyes" ; then
! 49: ac_save_CFLAGS="$CFLAGS"
! 50: ac_save_LIBS="$LIBS"
! 51: CFLAGS="$CFLAGS $GTK_CFLAGS"
! 52: LIBS="$GTK_LIBS $LIBS"
! 53: dnl
! 54: dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
! 55: dnl checks the results of pkg-config to some extent)
! 56: dnl
! 57: rm -f conf.gtktest
! 58: AC_TRY_RUN([
! 59: #include <gtk/gtk.h>
! 60: #include <stdio.h>
! 61: #include <stdlib.h>
! 62:
! 63: int
! 64: main ()
! 65: {
! 66: int major, minor, micro;
! 67: char *tmp_version;
! 68:
! 69: fclose (fopen ("conf.gtktest", "w"));
! 70:
! 71: /* HP/UX 9 (%@#!) writes to sscanf strings */
! 72: tmp_version = g_strdup("$min_gtk_version");
! 73: if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
! 74: printf("%s, bad version string\n", "$min_gtk_version");
! 75: exit(1);
! 76: }
! 77:
! 78: if ((gtk_major_version != $gtk_config_major_version) ||
! 79: (gtk_minor_version != $gtk_config_minor_version) ||
! 80: (gtk_micro_version != $gtk_config_micro_version))
! 81: {
! 82: printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
! 83: $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
! 84: gtk_major_version, gtk_minor_version, gtk_micro_version);
! 85: printf ("*** was found! If pkg-config was correct, then it is best\n");
! 86: printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
! 87: printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
! 88: printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
! 89: printf("*** required on your system.\n");
! 90: printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
! 91: printf("*** to point to the correct configuration files\n");
! 92: }
! 93: else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
! 94: (gtk_minor_version != GTK_MINOR_VERSION) ||
! 95: (gtk_micro_version != GTK_MICRO_VERSION))
! 96: {
! 97: printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
! 98: GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
! 99: printf("*** library (version %d.%d.%d)\n",
! 100: gtk_major_version, gtk_minor_version, gtk_micro_version);
! 101: }
! 102: else
! 103: {
! 104: if ((gtk_major_version > major) ||
! 105: ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
! 106: ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
! 107: {
! 108: return 0;
! 109: }
! 110: else
! 111: {
! 112: printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
! 113: gtk_major_version, gtk_minor_version, gtk_micro_version);
! 114: printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
! 115: major, minor, micro);
! 116: printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
! 117: printf("***\n");
! 118: printf("*** If you have already installed a sufficiently new version, this error\n");
! 119: printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
! 120: printf("*** being found. The easiest way to fix this is to remove the old version\n");
! 121: printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
! 122: printf("*** correct copy of pkg-config. (In this case, you will have to\n");
! 123: printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
! 124: printf("*** so that the correct libraries are found at run-time))\n");
! 125: }
! 126: }
! 127: return 1;
! 128: }
! 129: ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
! 130: CFLAGS="$ac_save_CFLAGS"
! 131: LIBS="$ac_save_LIBS"
! 132: fi
! 133: fi
! 134: if test "x$no_gtk" = x ; then
! 135: AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
! 136: ifelse([$2], , :, [$2])
! 137: else
! 138: AC_MSG_RESULT(no)
! 139: if test "$PKG_CONFIG" = "no" ; then
! 140: echo "*** A new enough version of pkg-config was not found."
! 141: echo "*** See http://pkgconfig.sourceforge.net"
! 142: else
! 143: if test -f conf.gtktest ; then
! 144: :
! 145: else
! 146: echo "*** Could not run GTK+ test program, checking why..."
! 147: ac_save_CFLAGS="$CFLAGS"
! 148: ac_save_LIBS="$LIBS"
! 149: CFLAGS="$CFLAGS $GTK_CFLAGS"
! 150: LIBS="$LIBS $GTK_LIBS"
! 151: AC_TRY_LINK([
! 152: #include <gtk/gtk.h>
! 153: #include <stdio.h>
! 154: ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
! 155: [ echo "*** The test program compiled, but did not run. This usually means"
! 156: echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
! 157: echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
! 158: echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
! 159: echo "*** to the installed location Also, make sure you have run ldconfig if that"
! 160: echo "*** is required on your system"
! 161: echo "***"
! 162: echo "*** If you have an old version installed, it is best to remove it, although"
! 163: echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
! 164: [ echo "*** The test program failed to compile or link. See the file config.log for the"
! 165: echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."])
! 166: CFLAGS="$ac_save_CFLAGS"
! 167: LIBS="$ac_save_LIBS"
! 168: fi
! 169: fi
! 170: GTK_CFLAGS=""
! 171: GTK_LIBS=""
! 172: ifelse([$3], , :, [$3])
! 173: fi
! 174: AC_SUBST(GTK_CFLAGS)
! 175: AC_SUBST(GTK_LIBS)
! 176: rm -f conf.gtktest
! 177: ])
! 178: m4trace:/usr/local/share/aclocal/pkg.m4:27: -1- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$])
! 179: m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
! 180: m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
! 181: AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
! 182: AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
! 183: AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
! 184:
! 185: if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
! 186: AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
! 187: fi
! 188: if test -n "$PKG_CONFIG"; then
! 189: _pkg_min_version=m4_default([$1], [0.9.0])
! 190: AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
! 191: if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
! 192: AC_MSG_RESULT([yes])
! 193: else
! 194: AC_MSG_RESULT([no])
! 195: PKG_CONFIG=""
! 196: fi
! 197: fi[]dnl
! 198: ])
! 199: m4trace:/usr/local/share/aclocal/pkg.m4:60: -1- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
! 200: if test -n "$PKG_CONFIG" && \
! 201: AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
! 202: m4_default([$2], [:])
! 203: m4_ifvaln([$3], [else
! 204: $3])dnl
! 205: fi])
! 206: m4trace:/usr/local/share/aclocal/pkg.m4:86: -1- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])
! 207: if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
! 208: _pkg_short_errors_supported=yes
! 209: else
! 210: _pkg_short_errors_supported=no
! 211: fi[]dnl
! 212: ])
! 213: m4trace:/usr/local/share/aclocal/pkg.m4:106: -1- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
! 214: AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
! 215: AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
! 216:
! 217: pkg_failed=no
! 218: AC_MSG_CHECKING([for $1])
! 219:
! 220: _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
! 221: _PKG_CONFIG([$1][_LIBS], [libs], [$2])
! 222:
! 223: m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
! 224: and $1[]_LIBS to avoid the need to call pkg-config.
! 225: See the pkg-config man page for more details.])
! 226:
! 227: if test $pkg_failed = yes; then
! 228: AC_MSG_RESULT([no])
! 229: _PKG_SHORT_ERRORS_SUPPORTED
! 230: if test $_pkg_short_errors_supported = yes; then
! 231: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
! 232: else
! 233: $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
! 234: fi
! 235: # Put the nasty error message in config.log where it belongs
! 236: echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
! 237:
! 238: m4_default([$4], [AC_MSG_ERROR(
! 239: [Package requirements ($2) were not met:
! 240:
! 241: $$1_PKG_ERRORS
! 242:
! 243: Consider adjusting the PKG_CONFIG_PATH environment variable if you
! 244: installed software in a non-standard prefix.
! 245:
! 246: _PKG_TEXT])[]dnl
! 247: ])
! 248: elif test $pkg_failed = untried; then
! 249: AC_MSG_RESULT([no])
! 250: m4_default([$4], [AC_MSG_FAILURE(
! 251: [The pkg-config script could not be found or is too old. Make sure it
! 252: is in your PATH or set the PKG_CONFIG environment variable to the full
! 253: path to pkg-config.
! 254:
! 255: _PKG_TEXT
! 256:
! 257: To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
! 258: ])
! 259: else
! 260: $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
! 261: $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
! 262: AC_MSG_RESULT([yes])
! 263: $3
! 264: fi[]dnl
! 265: ])
! 266: m4trace:/usr/local/share/aclocal/pkg.m4:168: -1- AC_DEFUN([PKG_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
! 267: m4_pushdef([pkg_description],
! 268: [pkg-config installation directory @<:@]pkg_default[@:>@])
! 269: AC_ARG_WITH([pkgconfigdir],
! 270: [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
! 271: [with_pkgconfigdir=]pkg_default)
! 272: AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
! 273: m4_popdef([pkg_default])
! 274: m4_popdef([pkg_description])
! 275: ])
! 276: m4trace:/usr/local/share/aclocal/pkg.m4:188: -1- AC_DEFUN([PKG_NOARCH_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
! 277: m4_pushdef([pkg_description],
! 278: [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
! 279: AC_ARG_WITH([noarch-pkgconfigdir],
! 280: [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
! 281: [with_noarch_pkgconfigdir=]pkg_default)
! 282: AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
! 283: m4_popdef([pkg_default])
! 284: m4_popdef([pkg_description])
! 285: ])
! 286: m4trace:/usr/local/share/aclocal/pkg.m4:205: -1- AC_DEFUN([PKG_CHECK_VAR], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
! 287: AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
! 288:
! 289: _PKG_CONFIG([$1], [variable="][$3]["], [$2])
! 290: AS_VAR_COPY([$1], [pkg_cv_][$1])
! 291:
! 292: AS_VAR_IF([$1], [""], [$5], [$4])dnl
! 293: ])
! 294: m4trace:/usr/local/share/aclocal/pkg.m4:224: -1- AC_DEFUN([PKG_WITH_MODULES], [
! 295: m4_pushdef([with_arg], m4_tolower([$1]))
! 296:
! 297: m4_pushdef([description],
! 298: [m4_default([$5], [build with ]with_arg[ support])])
! 299:
! 300: m4_pushdef([def_arg], [m4_default([$6], [auto])])
! 301: m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes])
! 302: m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no])
! 303:
! 304: m4_case(def_arg,
! 305: [yes],[m4_pushdef([with_without], [--without-]with_arg)],
! 306: [m4_pushdef([with_without],[--with-]with_arg)])
! 307:
! 308: AC_ARG_WITH(with_arg,
! 309: AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),,
! 310: [AS_TR_SH([with_]with_arg)=def_arg])
! 311:
! 312: AS_CASE([$AS_TR_SH([with_]with_arg)],
! 313: [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)],
! 314: [auto],[PKG_CHECK_MODULES([$1],[$2],
! 315: [m4_n([def_action_if_found]) $3],
! 316: [m4_n([def_action_if_not_found]) $4])])
! 317:
! 318: m4_popdef([with_arg])
! 319: m4_popdef([description])
! 320: m4_popdef([def_arg])
! 321:
! 322: ])
! 323: m4trace:/usr/local/share/aclocal/pkg.m4:264: -1- AC_DEFUN([PKG_HAVE_WITH_MODULES], [
! 324: PKG_WITH_MODULES([$1],[$2],,,[$3],[$4])
! 325:
! 326: AM_CONDITIONAL([HAVE_][$1],
! 327: [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"])
! 328: ])
! 329: m4trace:/usr/local/share/aclocal/pkg.m4:281: -1- AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES], [
! 330: PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4])
! 331:
! 332: AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"],
! 333: [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])])
! 334: ])
! 335: m4trace:/usr/local/share/aclocal-1.15/amversion.m4:14: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.15'
! 336: dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
! 337: dnl require some minimum version. Point them to the right macro.
! 338: m4_if([$1], [1.15], [],
! 339: [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
! 340: ])
! 341: m4trace:/usr/local/share/aclocal-1.15/amversion.m4:33: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.15])dnl
! 342: m4_ifndef([AC_AUTOCONF_VERSION],
! 343: [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
! 344: _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
! 345: m4trace:/usr/local/share/aclocal-1.15/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
! 346: # Expand $ac_aux_dir to an absolute path.
! 347: am_aux_dir=`cd "$ac_aux_dir" && pwd`
! 348: ])
! 349: m4trace:/usr/local/share/aclocal-1.15/cond.m4:12: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl
! 350: m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
! 351: [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
! 352: AC_SUBST([$1_TRUE])dnl
! 353: AC_SUBST([$1_FALSE])dnl
! 354: _AM_SUBST_NOTMAKE([$1_TRUE])dnl
! 355: _AM_SUBST_NOTMAKE([$1_FALSE])dnl
! 356: m4_define([_AM_COND_VALUE_$1], [$2])dnl
! 357: if $2; then
! 358: $1_TRUE=
! 359: $1_FALSE='#'
! 360: else
! 361: $1_TRUE='#'
! 362: $1_FALSE=
! 363: fi
! 364: AC_CONFIG_COMMANDS_PRE(
! 365: [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
! 366: AC_MSG_ERROR([[conditional "$1" was never defined.
! 367: Usually this means the macro was only invoked conditionally.]])
! 368: fi])])
! 369: m4trace:/usr/local/share/aclocal-1.15/depend.m4:26: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl
! 370: AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
! 371: AC_REQUIRE([AM_MAKE_INCLUDE])dnl
! 372: AC_REQUIRE([AM_DEP_TRACK])dnl
! 373:
! 374: m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
! 375: [$1], [CXX], [depcc="$CXX" am_compiler_list=],
! 376: [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
! 377: [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
! 378: [$1], [UPC], [depcc="$UPC" am_compiler_list=],
! 379: [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
! 380: [depcc="$$1" am_compiler_list=])
! 381:
! 382: AC_CACHE_CHECK([dependency style of $depcc],
! 383: [am_cv_$1_dependencies_compiler_type],
! 384: [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
! 385: # We make a subdir and do the tests there. Otherwise we can end up
! 386: # making bogus files that we don't know about and never remove. For
! 387: # instance it was reported that on HP-UX the gcc test will end up
! 388: # making a dummy file named 'D' -- because '-MD' means "put the output
! 389: # in D".
! 390: rm -rf conftest.dir
! 391: mkdir conftest.dir
! 392: # Copy depcomp to subdir because otherwise we won't find it if we're
! 393: # using a relative directory.
! 394: cp "$am_depcomp" conftest.dir
! 395: cd conftest.dir
! 396: # We will build objects and dependencies in a subdirectory because
! 397: # it helps to detect inapplicable dependency modes. For instance
! 398: # both Tru64's cc and ICC support -MD to output dependencies as a
! 399: # side effect of compilation, but ICC will put the dependencies in
! 400: # the current directory while Tru64 will put them in the object
! 401: # directory.
! 402: mkdir sub
! 403:
! 404: am_cv_$1_dependencies_compiler_type=none
! 405: if test "$am_compiler_list" = ""; then
! 406: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
! 407: fi
! 408: am__universal=false
! 409: m4_case([$1], [CC],
! 410: [case " $depcc " in #(
! 411: *\ -arch\ *\ -arch\ *) am__universal=true ;;
! 412: esac],
! 413: [CXX],
! 414: [case " $depcc " in #(
! 415: *\ -arch\ *\ -arch\ *) am__universal=true ;;
! 416: esac])
! 417:
! 418: for depmode in $am_compiler_list; do
! 419: # Setup a source with many dependencies, because some compilers
! 420: # like to wrap large dependency lists on column 80 (with \), and
! 421: # we should not choose a depcomp mode which is confused by this.
! 422: #
! 423: # We need to recreate these files for each test, as the compiler may
! 424: # overwrite some of them when testing with obscure command lines.
! 425: # This happens at least with the AIX C compiler.
! 426: : > sub/conftest.c
! 427: for i in 1 2 3 4 5 6; do
! 428: echo '#include "conftst'$i'.h"' >> sub/conftest.c
! 429: # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
! 430: # Solaris 10 /bin/sh.
! 431: echo '/* dummy */' > sub/conftst$i.h
! 432: done
! 433: echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
! 434:
! 435: # We check with '-c' and '-o' for the sake of the "dashmstdout"
! 436: # mode. It turns out that the SunPro C++ compiler does not properly
! 437: # handle '-M -o', and we need to detect this. Also, some Intel
! 438: # versions had trouble with output in subdirs.
! 439: am__obj=sub/conftest.${OBJEXT-o}
! 440: am__minus_obj="-o $am__obj"
! 441: case $depmode in
! 442: gcc)
! 443: # This depmode causes a compiler race in universal mode.
! 444: test "$am__universal" = false || continue
! 445: ;;
! 446: nosideeffect)
! 447: # After this tag, mechanisms are not by side-effect, so they'll
! 448: # only be used when explicitly requested.
! 449: if test "x$enable_dependency_tracking" = xyes; then
! 450: continue
! 451: else
! 452: break
! 453: fi
! 454: ;;
! 455: msvc7 | msvc7msys | msvisualcpp | msvcmsys)
! 456: # This compiler won't grok '-c -o', but also, the minuso test has
! 457: # not run yet. These depmodes are late enough in the game, and
! 458: # so weak that their functioning should not be impacted.
! 459: am__obj=conftest.${OBJEXT-o}
! 460: am__minus_obj=
! 461: ;;
! 462: none) break ;;
! 463: esac
! 464: if depmode=$depmode \
! 465: source=sub/conftest.c object=$am__obj \
! 466: depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
! 467: $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
! 468: >/dev/null 2>conftest.err &&
! 469: grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
! 470: grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
! 471: grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
! 472: ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
! 473: # icc doesn't choke on unknown options, it will just issue warnings
! 474: # or remarks (even with -Werror). So we grep stderr for any message
! 475: # that says an option was ignored or not supported.
! 476: # When given -MP, icc 7.0 and 7.1 complain thusly:
! 477: # icc: Command line warning: ignoring option '-M'; no argument required
! 478: # The diagnosis changed in icc 8.0:
! 479: # icc: Command line remark: option '-MP' not supported
! 480: if (grep 'ignoring option' conftest.err ||
! 481: grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
! 482: am_cv_$1_dependencies_compiler_type=$depmode
! 483: break
! 484: fi
! 485: fi
! 486: done
! 487:
! 488: cd ..
! 489: rm -rf conftest.dir
! 490: else
! 491: am_cv_$1_dependencies_compiler_type=none
! 492: fi
! 493: ])
! 494: AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
! 495: AM_CONDITIONAL([am__fastdep$1], [
! 496: test "x$enable_dependency_tracking" != xno \
! 497: && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
! 498: ])
! 499: m4trace:/usr/local/share/aclocal-1.15/depend.m4:163: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl
! 500: AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
! 501: ])
! 502: m4trace:/usr/local/share/aclocal-1.15/depend.m4:171: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl
! 503: AS_HELP_STRING(
! 504: [--enable-dependency-tracking],
! 505: [do not reject slow dependency extractors])
! 506: AS_HELP_STRING(
! 507: [--disable-dependency-tracking],
! 508: [speeds up one-time build])])
! 509: if test "x$enable_dependency_tracking" != xno; then
! 510: am_depcomp="$ac_aux_dir/depcomp"
! 511: AMDEPBACKSLASH='\'
! 512: am__nodep='_no'
! 513: fi
! 514: AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
! 515: AC_SUBST([AMDEPBACKSLASH])dnl
! 516: _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
! 517: AC_SUBST([am__nodep])dnl
! 518: _AM_SUBST_NOTMAKE([am__nodep])dnl
! 519: ])
! 520: m4trace:/usr/local/share/aclocal-1.15/depout.m4:12: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{
! 521: # Older Autoconf quotes --file arguments for eval, but not when files
! 522: # are listed without --file. Let's play safe and only enable the eval
! 523: # if we detect the quoting.
! 524: case $CONFIG_FILES in
! 525: *\'*) eval set x "$CONFIG_FILES" ;;
! 526: *) set x $CONFIG_FILES ;;
! 527: esac
! 528: shift
! 529: for mf
! 530: do
! 531: # Strip MF so we end up with the name of the file.
! 532: mf=`echo "$mf" | sed -e 's/:.*$//'`
! 533: # Check whether this is an Automake generated Makefile or not.
! 534: # We used to match only the files named 'Makefile.in', but
! 535: # some people rename them; so instead we look at the file content.
! 536: # Grep'ing the first line is not enough: some people post-process
! 537: # each Makefile.in and add a new line on top of each file to say so.
! 538: # Grep'ing the whole file is not good either: AIX grep has a line
! 539: # limit of 2048, but all sed's we know have understand at least 4000.
! 540: if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
! 541: dirpart=`AS_DIRNAME("$mf")`
! 542: else
! 543: continue
! 544: fi
! 545: # Extract the definition of DEPDIR, am__include, and am__quote
! 546: # from the Makefile without running 'make'.
! 547: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
! 548: test -z "$DEPDIR" && continue
! 549: am__include=`sed -n 's/^am__include = //p' < "$mf"`
! 550: test -z "$am__include" && continue
! 551: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
! 552: # Find all dependency output files, they are included files with
! 553: # $(DEPDIR) in their names. We invoke sed twice because it is the
! 554: # simplest approach to changing $(DEPDIR) to its actual value in the
! 555: # expansion.
! 556: for file in `sed -n "
! 557: s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
! 558: sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
! 559: # Make sure the directory exists.
! 560: test -f "$dirpart/$file" && continue
! 561: fdir=`AS_DIRNAME(["$file"])`
! 562: AS_MKDIR_P([$dirpart/$fdir])
! 563: # echo "creating $dirpart/$file"
! 564: echo '# dummy' > "$dirpart/$file"
! 565: done
! 566: done
! 567: }
! 568: ])
! 569: m4trace:/usr/local/share/aclocal-1.15/depout.m4:71: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles],
! 570: [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
! 571: [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
! 572: ])
! 573: m4trace:/usr/local/share/aclocal-1.15/init.m4:29: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl
! 574: dnl Autoconf wants to disallow AM_ names. We explicitly allow
! 575: dnl the ones we care about.
! 576: m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
! 577: AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
! 578: AC_REQUIRE([AC_PROG_INSTALL])dnl
! 579: if test "`cd $srcdir && pwd`" != "`pwd`"; then
! 580: # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
! 581: # is not polluted with repeated "-I."
! 582: AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
! 583: # test to see if srcdir already configured
! 584: if test -f $srcdir/config.status; then
! 585: AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
! 586: fi
! 587: fi
! 588:
! 589: # test whether we have cygpath
! 590: if test -z "$CYGPATH_W"; then
! 591: if (cygpath --version) >/dev/null 2>/dev/null; then
! 592: CYGPATH_W='cygpath -w'
! 593: else
! 594: CYGPATH_W=echo
! 595: fi
! 596: fi
! 597: AC_SUBST([CYGPATH_W])
! 598:
! 599: # Define the identity of the package.
! 600: dnl Distinguish between old-style and new-style calls.
! 601: m4_ifval([$2],
! 602: [AC_DIAGNOSE([obsolete],
! 603: [$0: two- and three-arguments forms are deprecated.])
! 604: m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
! 605: AC_SUBST([PACKAGE], [$1])dnl
! 606: AC_SUBST([VERSION], [$2])],
! 607: [_AM_SET_OPTIONS([$1])dnl
! 608: dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
! 609: m4_if(
! 610: m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
! 611: [ok:ok],,
! 612: [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
! 613: AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
! 614: AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
! 615:
! 616: _AM_IF_OPTION([no-define],,
! 617: [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
! 618: AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
! 619:
! 620: # Some tools Automake needs.
! 621: AC_REQUIRE([AM_SANITY_CHECK])dnl
! 622: AC_REQUIRE([AC_ARG_PROGRAM])dnl
! 623: AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
! 624: AM_MISSING_PROG([AUTOCONF], [autoconf])
! 625: AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
! 626: AM_MISSING_PROG([AUTOHEADER], [autoheader])
! 627: AM_MISSING_PROG([MAKEINFO], [makeinfo])
! 628: AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
! 629: AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
! 630: AC_REQUIRE([AC_PROG_MKDIR_P])dnl
! 631: # For better backward compatibility. To be removed once Automake 1.9.x
! 632: # dies out for good. For more background, see:
! 633: # <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
! 634: # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
! 635: AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
! 636: # We need awk for the "check" target (and possibly the TAP driver). The
! 637: # system "awk" is bad on some platforms.
! 638: AC_REQUIRE([AC_PROG_AWK])dnl
! 639: AC_REQUIRE([AC_PROG_MAKE_SET])dnl
! 640: AC_REQUIRE([AM_SET_LEADING_DOT])dnl
! 641: _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
! 642: [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
! 643: [_AM_PROG_TAR([v7])])])
! 644: _AM_IF_OPTION([no-dependencies],,
! 645: [AC_PROVIDE_IFELSE([AC_PROG_CC],
! 646: [_AM_DEPENDENCIES([CC])],
! 647: [m4_define([AC_PROG_CC],
! 648: m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
! 649: AC_PROVIDE_IFELSE([AC_PROG_CXX],
! 650: [_AM_DEPENDENCIES([CXX])],
! 651: [m4_define([AC_PROG_CXX],
! 652: m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
! 653: AC_PROVIDE_IFELSE([AC_PROG_OBJC],
! 654: [_AM_DEPENDENCIES([OBJC])],
! 655: [m4_define([AC_PROG_OBJC],
! 656: m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
! 657: AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
! 658: [_AM_DEPENDENCIES([OBJCXX])],
! 659: [m4_define([AC_PROG_OBJCXX],
! 660: m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
! 661: ])
! 662: AC_REQUIRE([AM_SILENT_RULES])dnl
! 663: dnl The testsuite driver may need to know about EXEEXT, so add the
! 664: dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
! 665: dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
! 666: AC_CONFIG_COMMANDS_PRE(dnl
! 667: [m4_provide_if([_AM_COMPILER_EXEEXT],
! 668: [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
! 669:
! 670: # POSIX will say in a future version that running "rm -f" with no argument
! 671: # is OK; and we want to be able to make that assumption in our Makefile
! 672: # recipes. So use an aggressive probe to check that the usage we want is
! 673: # actually supported "in the wild" to an acceptable degree.
! 674: # See automake bug#10828.
! 675: # To make any issue more visible, cause the running configure to be aborted
! 676: # by default if the 'rm' program in use doesn't match our expectations; the
! 677: # user can still override this though.
! 678: if rm -f && rm -fr && rm -rf; then : OK; else
! 679: cat >&2 <<'END'
! 680: Oops!
! 681:
! 682: Your 'rm' program seems unable to run without file operands specified
! 683: on the command line, even when the '-f' option is present. This is contrary
! 684: to the behaviour of most rm programs out there, and not conforming with
! 685: the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
! 686:
! 687: Please tell bug-automake@gnu.org about your system, including the value
! 688: of your $PATH and any error possibly output before this message. This
! 689: can help us improve future automake versions.
! 690:
! 691: END
! 692: if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
! 693: echo 'Configuration will proceed anyway, since you have set the' >&2
! 694: echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
! 695: echo >&2
! 696: else
! 697: cat >&2 <<'END'
! 698: Aborting the configuration process, to ensure you take notice of the issue.
! 699:
! 700: You can download and install GNU coreutils to get an 'rm' implementation
! 701: that behaves properly: <http://www.gnu.org/software/coreutils/>.
! 702:
! 703: If you want to complete the configuration process using your problematic
! 704: 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
! 705: to "yes", and re-run configure.
! 706:
! 707: END
! 708: AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
! 709: fi
! 710: fi
! 711: dnl The trailing newline in this macro's definition is deliberate, for
! 712: dnl backward compatibility and to allow trailing 'dnl'-style comments
! 713: dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
! 714: ])
! 715: m4trace:/usr/local/share/aclocal-1.15/init.m4:186: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers.
! 716: _am_arg=$1
! 717: _am_stamp_count=1
! 718: for _am_header in $config_headers :; do
! 719: case $_am_header in
! 720: $_am_arg | $_am_arg:* )
! 721: break ;;
! 722: * )
! 723: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
! 724: esac
! 725: done
! 726: echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
! 727: m4trace:/usr/local/share/aclocal-1.15/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! 728: if test x"${install_sh+set}" != xset; then
! 729: case $am_aux_dir in
! 730: *\ * | *\ *)
! 731: install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
! 732: *)
! 733: install_sh="\${SHELL} $am_aux_dir/install-sh"
! 734: esac
! 735: fi
! 736: AC_SUBST([install_sh])])
! 737: m4trace:/usr/local/share/aclocal-1.15/lead-dot.m4:10: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null
! 738: mkdir .tst 2>/dev/null
! 739: if test -d .tst; then
! 740: am__leading_dot=.
! 741: else
! 742: am__leading_dot=_
! 743: fi
! 744: rmdir .tst 2>/dev/null
! 745: AC_SUBST([am__leading_dot])])
! 746: m4trace:/usr/local/share/aclocal-1.15/make.m4:12: -1- AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make}
! 747: cat > confinc << 'END'
! 748: am__doit:
! 749: @echo this is the am__doit target
! 750: .PHONY: am__doit
! 751: END
! 752: # If we don't find an include directive, just comment out the code.
! 753: AC_MSG_CHECKING([for style of include used by $am_make])
! 754: am__include="#"
! 755: am__quote=
! 756: _am_result=none
! 757: # First try GNU make style include.
! 758: echo "include confinc" > confmf
! 759: # Ignore all kinds of additional output from 'make'.
! 760: case `$am_make -s -f confmf 2> /dev/null` in #(
! 761: *the\ am__doit\ target*)
! 762: am__include=include
! 763: am__quote=
! 764: _am_result=GNU
! 765: ;;
! 766: esac
! 767: # Now try BSD make style include.
! 768: if test "$am__include" = "#"; then
! 769: echo '.include "confinc"' > confmf
! 770: case `$am_make -s -f confmf 2> /dev/null` in #(
! 771: *the\ am__doit\ target*)
! 772: am__include=.include
! 773: am__quote="\""
! 774: _am_result=BSD
! 775: ;;
! 776: esac
! 777: fi
! 778: AC_SUBST([am__include])
! 779: AC_SUBST([am__quote])
! 780: AC_MSG_RESULT([$_am_result])
! 781: rm -f confinc confmf
! 782: ])
! 783: m4trace:/usr/local/share/aclocal-1.15/missing.m4:11: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN])
! 784: $1=${$1-"${am_missing_run}$2"}
! 785: AC_SUBST($1)])
! 786: m4trace:/usr/local/share/aclocal-1.15/missing.m4:20: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! 787: AC_REQUIRE_AUX_FILE([missing])dnl
! 788: if test x"${MISSING+set}" != xset; then
! 789: case $am_aux_dir in
! 790: *\ * | *\ *)
! 791: MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
! 792: *)
! 793: MISSING="\${SHELL} $am_aux_dir/missing" ;;
! 794: esac
! 795: fi
! 796: # Use eval to expand $SHELL
! 797: if eval "$MISSING --is-lightweight"; then
! 798: am_missing_run="$MISSING "
! 799: else
! 800: am_missing_run=
! 801: AC_MSG_WARN(['missing' script is too old or missing])
! 802: fi
! 803: ])
! 804: m4trace:/usr/local/share/aclocal-1.15/options.m4:11: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
! 805: m4trace:/usr/local/share/aclocal-1.15/options.m4:17: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])])
! 806: m4trace:/usr/local/share/aclocal-1.15/options.m4:23: -1- AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
! 807: m4trace:/usr/local/share/aclocal-1.15/options.m4:29: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
! 808: m4trace:/usr/local/share/aclocal-1.15/prog-cc-c-o.m4:12: -1- AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! 809: AC_REQUIRE_AUX_FILE([compile])dnl
! 810: AC_LANG_PUSH([C])dnl
! 811: AC_CACHE_CHECK(
! 812: [whether $CC understands -c and -o together],
! 813: [am_cv_prog_cc_c_o],
! 814: [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
! 815: # Make sure it works both with $CC and with simple cc.
! 816: # Following AC_PROG_CC_C_O, we do the test twice because some
! 817: # compilers refuse to overwrite an existing .o file with -o,
! 818: # though they will create one.
! 819: am_cv_prog_cc_c_o=yes
! 820: for am_i in 1 2; do
! 821: if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
! 822: && test -f conftest2.$ac_objext; then
! 823: : OK
! 824: else
! 825: am_cv_prog_cc_c_o=no
! 826: break
! 827: fi
! 828: done
! 829: rm -f core conftest*
! 830: unset am_i])
! 831: if test "$am_cv_prog_cc_c_o" != yes; then
! 832: # Losing compiler, so override with the script.
! 833: # FIXME: It is wrong to rewrite CC.
! 834: # But if we don't then we get into trouble of one sort or another.
! 835: # A longer-term fix would be to have automake use am__CC in this case,
! 836: # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
! 837: CC="$am_aux_dir/compile $CC"
! 838: fi
! 839: AC_LANG_POP([C])])
! 840: m4trace:/usr/local/share/aclocal-1.15/prog-cc-c-o.m4:47: -1- AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
! 841: m4trace:/usr/local/share/aclocal-1.15/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
! 842: ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
! 843: ac_status=$?
! 844: echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
! 845: (exit $ac_status); }])
! 846: m4trace:/usr/local/share/aclocal-1.15/sanity.m4:11: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane])
! 847: # Reject unsafe characters in $srcdir or the absolute working directory
! 848: # name. Accept space and tab only in the latter.
! 849: am_lf='
! 850: '
! 851: case `pwd` in
! 852: *[[\\\"\#\$\&\'\`$am_lf]]*)
! 853: AC_MSG_ERROR([unsafe absolute working directory name]);;
! 854: esac
! 855: case $srcdir in
! 856: *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
! 857: AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
! 858: esac
! 859:
! 860: # Do 'set' in a subshell so we don't clobber the current shell's
! 861: # arguments. Must try -L first in case configure is actually a
! 862: # symlink; some systems play weird games with the mod time of symlinks
! 863: # (eg FreeBSD returns the mod time of the symlink's containing
! 864: # directory).
! 865: if (
! 866: am_has_slept=no
! 867: for am_try in 1 2; do
! 868: echo "timestamp, slept: $am_has_slept" > conftest.file
! 869: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
! 870: if test "$[*]" = "X"; then
! 871: # -L didn't work.
! 872: set X `ls -t "$srcdir/configure" conftest.file`
! 873: fi
! 874: if test "$[*]" != "X $srcdir/configure conftest.file" \
! 875: && test "$[*]" != "X conftest.file $srcdir/configure"; then
! 876:
! 877: # If neither matched, then we have a broken ls. This can happen
! 878: # if, for instance, CONFIG_SHELL is bash and it inherits a
! 879: # broken ls alias from the environment. This has actually
! 880: # happened. Such a system could not be considered "sane".
! 881: AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
! 882: alias in your environment])
! 883: fi
! 884: if test "$[2]" = conftest.file || test $am_try -eq 2; then
! 885: break
! 886: fi
! 887: # Just in case.
! 888: sleep 1
! 889: am_has_slept=yes
! 890: done
! 891: test "$[2]" = conftest.file
! 892: )
! 893: then
! 894: # Ok.
! 895: :
! 896: else
! 897: AC_MSG_ERROR([newly created file is older than distributed files!
! 898: Check your system clock])
! 899: fi
! 900: AC_MSG_RESULT([yes])
! 901: # If we didn't sleep, we still need to ensure time stamps of config.status and
! 902: # generated files are strictly newer.
! 903: am_sleep_pid=
! 904: if grep 'slept: no' conftest.file >/dev/null 2>&1; then
! 905: ( sleep 1 ) &
! 906: am_sleep_pid=$!
! 907: fi
! 908: AC_CONFIG_COMMANDS_PRE(
! 909: [AC_MSG_CHECKING([that generated files are newer than configure])
! 910: if test -n "$am_sleep_pid"; then
! 911: # Hide warnings about reused PIDs.
! 912: wait $am_sleep_pid 2>/dev/null
! 913: fi
! 914: AC_MSG_RESULT([done])])
! 915: rm -f conftest.file
! 916: ])
! 917: m4trace:/usr/local/share/aclocal-1.15/silent.m4:12: -1- AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl
! 918: AS_HELP_STRING(
! 919: [--enable-silent-rules],
! 920: [less verbose build output (undo: "make V=1")])
! 921: AS_HELP_STRING(
! 922: [--disable-silent-rules],
! 923: [verbose build output (undo: "make V=0")])dnl
! 924: ])
! 925: case $enable_silent_rules in @%:@ (((
! 926: yes) AM_DEFAULT_VERBOSITY=0;;
! 927: no) AM_DEFAULT_VERBOSITY=1;;
! 928: *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
! 929: esac
! 930: dnl
! 931: dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
! 932: dnl do not support nested variable expansions.
! 933: dnl See automake bug#9928 and bug#10237.
! 934: am_make=${MAKE-make}
! 935: AC_CACHE_CHECK([whether $am_make supports nested variables],
! 936: [am_cv_make_support_nested_variables],
! 937: [if AS_ECHO([['TRUE=$(BAR$(V))
! 938: BAR0=false
! 939: BAR1=true
! 940: V=1
! 941: am__doit:
! 942: @$(TRUE)
! 943: .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
! 944: am_cv_make_support_nested_variables=yes
! 945: else
! 946: am_cv_make_support_nested_variables=no
! 947: fi])
! 948: if test $am_cv_make_support_nested_variables = yes; then
! 949: dnl Using '$V' instead of '$(V)' breaks IRIX make.
! 950: AM_V='$(V)'
! 951: AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
! 952: else
! 953: AM_V=$AM_DEFAULT_VERBOSITY
! 954: AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
! 955: fi
! 956: AC_SUBST([AM_V])dnl
! 957: AM_SUBST_NOTMAKE([AM_V])dnl
! 958: AC_SUBST([AM_DEFAULT_V])dnl
! 959: AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
! 960: AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
! 961: AM_BACKSLASH='\'
! 962: AC_SUBST([AM_BACKSLASH])dnl
! 963: _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
! 964: ])
! 965: m4trace:/usr/local/share/aclocal-1.15/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
! 966: # Installed binaries are usually stripped using 'strip' when the user
! 967: # run "make install-strip". However 'strip' might not be the right
! 968: # tool to use in cross-compilation environments, therefore Automake
! 969: # will honor the 'STRIP' environment variable to overrule this program.
! 970: dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
! 971: if test "$cross_compiling" != no; then
! 972: AC_CHECK_TOOL([STRIP], [strip], :)
! 973: fi
! 974: INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
! 975: AC_SUBST([INSTALL_STRIP_PROGRAM])])
! 976: m4trace:/usr/local/share/aclocal-1.15/substnot.m4:12: -1- AC_DEFUN([_AM_SUBST_NOTMAKE])
! 977: m4trace:/usr/local/share/aclocal-1.15/substnot.m4:17: -1- AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
! 978: m4trace:/usr/local/share/aclocal-1.15/tar.m4:23: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used
! 979: # in the wild :-( We should find a proper way to deprecate it ...
! 980: AC_SUBST([AMTAR], ['$${TAR-tar}'])
! 981:
! 982: # We'll loop over all known methods to create a tar archive until one works.
! 983: _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
! 984:
! 985: m4_if([$1], [v7],
! 986: [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
! 987:
! 988: [m4_case([$1],
! 989: [ustar],
! 990: [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
! 991: # There is notably a 21 bits limit for the UID and the GID. In fact,
! 992: # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
! 993: # and bug#13588).
! 994: am_max_uid=2097151 # 2^21 - 1
! 995: am_max_gid=$am_max_uid
! 996: # The $UID and $GID variables are not portable, so we need to resort
! 997: # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
! 998: # below are definitely unexpected, so allow the users to see them
! 999: # (that is, avoid stderr redirection).
! 1000: am_uid=`id -u || echo unknown`
! 1001: am_gid=`id -g || echo unknown`
! 1002: AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
! 1003: if test $am_uid -le $am_max_uid; then
! 1004: AC_MSG_RESULT([yes])
! 1005: else
! 1006: AC_MSG_RESULT([no])
! 1007: _am_tools=none
! 1008: fi
! 1009: AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
! 1010: if test $am_gid -le $am_max_gid; then
! 1011: AC_MSG_RESULT([yes])
! 1012: else
! 1013: AC_MSG_RESULT([no])
! 1014: _am_tools=none
! 1015: fi],
! 1016:
! 1017: [pax],
! 1018: [],
! 1019:
! 1020: [m4_fatal([Unknown tar format])])
! 1021:
! 1022: AC_MSG_CHECKING([how to create a $1 tar archive])
! 1023:
! 1024: # Go ahead even if we have the value already cached. We do so because we
! 1025: # need to set the values for the 'am__tar' and 'am__untar' variables.
! 1026: _am_tools=${am_cv_prog_tar_$1-$_am_tools}
! 1027:
! 1028: for _am_tool in $_am_tools; do
! 1029: case $_am_tool in
! 1030: gnutar)
! 1031: for _am_tar in tar gnutar gtar; do
! 1032: AM_RUN_LOG([$_am_tar --version]) && break
! 1033: done
! 1034: am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
! 1035: am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
! 1036: am__untar="$_am_tar -xf -"
! 1037: ;;
! 1038: plaintar)
! 1039: # Must skip GNU tar: if it does not support --format= it doesn't create
! 1040: # ustar tarball either.
! 1041: (tar --version) >/dev/null 2>&1 && continue
! 1042: am__tar='tar chf - "$$tardir"'
! 1043: am__tar_='tar chf - "$tardir"'
! 1044: am__untar='tar xf -'
! 1045: ;;
! 1046: pax)
! 1047: am__tar='pax -L -x $1 -w "$$tardir"'
! 1048: am__tar_='pax -L -x $1 -w "$tardir"'
! 1049: am__untar='pax -r'
! 1050: ;;
! 1051: cpio)
! 1052: am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
! 1053: am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
! 1054: am__untar='cpio -i -H $1 -d'
! 1055: ;;
! 1056: none)
! 1057: am__tar=false
! 1058: am__tar_=false
! 1059: am__untar=false
! 1060: ;;
! 1061: esac
! 1062:
! 1063: # If the value was cached, stop now. We just wanted to have am__tar
! 1064: # and am__untar set.
! 1065: test -n "${am_cv_prog_tar_$1}" && break
! 1066:
! 1067: # tar/untar a dummy directory, and stop if the command works.
! 1068: rm -rf conftest.dir
! 1069: mkdir conftest.dir
! 1070: echo GrepMe > conftest.dir/file
! 1071: AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
! 1072: rm -rf conftest.dir
! 1073: if test -s conftest.tar; then
! 1074: AM_RUN_LOG([$am__untar <conftest.tar])
! 1075: AM_RUN_LOG([cat conftest.dir/file])
! 1076: grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
! 1077: fi
! 1078: done
! 1079: rm -rf conftest.dir
! 1080:
! 1081: AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
! 1082: AC_MSG_RESULT([$am_cv_prog_tar_$1])])
! 1083:
! 1084: AC_SUBST([am__tar])
! 1085: AC_SUBST([am__untar])
! 1086: ])
! 1087: m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?A[CHUM]_])
! 1088: m4trace:configure.ac:1: -1- m4_pattern_forbid([_AC_])
! 1089: m4trace:configure.ac:1: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS'])
! 1090: m4trace:configure.ac:1: -1- m4_pattern_allow([^AS_FLAGS$])
! 1091: m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?m4_])
! 1092: m4trace:configure.ac:1: -1- m4_pattern_forbid([^dnl$])
! 1093: m4trace:configure.ac:1: -1- m4_pattern_forbid([^_?AS_])
! 1094: m4trace:configure.ac:1: -1- m4_pattern_allow([^SHELL$])
! 1095: m4trace:configure.ac:1: -1- m4_pattern_allow([^PATH_SEPARATOR$])
! 1096: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_NAME$])
! 1097: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
! 1098: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_VERSION$])
! 1099: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_STRING$])
! 1100: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
! 1101: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_URL$])
! 1102: m4trace:configure.ac:1: -1- m4_pattern_allow([^exec_prefix$])
! 1103: m4trace:configure.ac:1: -1- m4_pattern_allow([^prefix$])
! 1104: m4trace:configure.ac:1: -1- m4_pattern_allow([^program_transform_name$])
! 1105: m4trace:configure.ac:1: -1- m4_pattern_allow([^bindir$])
! 1106: m4trace:configure.ac:1: -1- m4_pattern_allow([^sbindir$])
! 1107: m4trace:configure.ac:1: -1- m4_pattern_allow([^libexecdir$])
! 1108: m4trace:configure.ac:1: -1- m4_pattern_allow([^datarootdir$])
! 1109: m4trace:configure.ac:1: -1- m4_pattern_allow([^datadir$])
! 1110: m4trace:configure.ac:1: -1- m4_pattern_allow([^sysconfdir$])
! 1111: m4trace:configure.ac:1: -1- m4_pattern_allow([^sharedstatedir$])
! 1112: m4trace:configure.ac:1: -1- m4_pattern_allow([^localstatedir$])
! 1113: m4trace:configure.ac:1: -1- m4_pattern_allow([^includedir$])
! 1114: m4trace:configure.ac:1: -1- m4_pattern_allow([^oldincludedir$])
! 1115: m4trace:configure.ac:1: -1- m4_pattern_allow([^docdir$])
! 1116: m4trace:configure.ac:1: -1- m4_pattern_allow([^infodir$])
! 1117: m4trace:configure.ac:1: -1- m4_pattern_allow([^htmldir$])
! 1118: m4trace:configure.ac:1: -1- m4_pattern_allow([^dvidir$])
! 1119: m4trace:configure.ac:1: -1- m4_pattern_allow([^pdfdir$])
! 1120: m4trace:configure.ac:1: -1- m4_pattern_allow([^psdir$])
! 1121: m4trace:configure.ac:1: -1- m4_pattern_allow([^libdir$])
! 1122: m4trace:configure.ac:1: -1- m4_pattern_allow([^localedir$])
! 1123: m4trace:configure.ac:1: -1- m4_pattern_allow([^mandir$])
! 1124: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_NAME$])
! 1125: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
! 1126: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_VERSION$])
! 1127: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_STRING$])
! 1128: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
! 1129: m4trace:configure.ac:1: -1- m4_pattern_allow([^PACKAGE_URL$])
! 1130: m4trace:configure.ac:1: -1- m4_pattern_allow([^DEFS$])
! 1131: m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_C$])
! 1132: m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_N$])
! 1133: m4trace:configure.ac:1: -1- m4_pattern_allow([^ECHO_T$])
! 1134: m4trace:configure.ac:1: -1- m4_pattern_allow([^LIBS$])
! 1135: m4trace:configure.ac:1: -1- m4_pattern_allow([^build_alias$])
! 1136: m4trace:configure.ac:1: -1- m4_pattern_allow([^host_alias$])
! 1137: m4trace:configure.ac:1: -1- m4_pattern_allow([^target_alias$])
! 1138: m4trace:configure.ac:3: -1- AM_INIT_AUTOMAKE([foreign])
! 1139: m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$])
! 1140: m4trace:configure.ac:3: -1- AM_SET_CURRENT_AUTOMAKE_VERSION
! 1141: m4trace:configure.ac:3: -1- AM_AUTOMAKE_VERSION([1.15])
! 1142: m4trace:configure.ac:3: -1- _AM_AUTOCONF_VERSION([2.69])
! 1143: m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
! 1144: m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
! 1145: m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_DATA$])
! 1146: m4trace:configure.ac:3: -1- m4_pattern_allow([^am__isrc$])
! 1147: m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([am__isrc])
! 1148: m4trace:configure.ac:3: -1- m4_pattern_allow([^CYGPATH_W$])
! 1149: m4trace:configure.ac:3: -1- _AM_SET_OPTIONS([foreign])
! 1150: m4trace:configure.ac:3: -1- _AM_SET_OPTION([foreign])
! 1151: m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([foreign])
! 1152: m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$])
! 1153: m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$])
! 1154: m4trace:configure.ac:3: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
! 1155: AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])
! 1156: m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([no-define])
! 1157: m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$])
! 1158: m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$])
! 1159: m4trace:configure.ac:3: -1- AM_SANITY_CHECK
! 1160: m4trace:configure.ac:3: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
! 1161: m4trace:configure.ac:3: -1- AM_MISSING_HAS_RUN
! 1162: m4trace:configure.ac:3: -1- AM_AUX_DIR_EXPAND
! 1163: m4trace:configure.ac:3: -1- m4_pattern_allow([^ACLOCAL$])
! 1164: m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOCONF], [autoconf])
! 1165: m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOCONF$])
! 1166: m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
! 1167: m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOMAKE$])
! 1168: m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader])
! 1169: m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOHEADER$])
! 1170: m4trace:configure.ac:3: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo])
! 1171: m4trace:configure.ac:3: -1- m4_pattern_allow([^MAKEINFO$])
! 1172: m4trace:configure.ac:3: -1- AM_PROG_INSTALL_SH
! 1173: m4trace:configure.ac:3: -1- m4_pattern_allow([^install_sh$])
! 1174: m4trace:configure.ac:3: -1- AM_PROG_INSTALL_STRIP
! 1175: m4trace:configure.ac:3: -1- m4_pattern_allow([^STRIP$])
! 1176: m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$])
! 1177: m4trace:configure.ac:3: -1- m4_pattern_allow([^MKDIR_P$])
! 1178: m4trace:configure.ac:3: -1- m4_pattern_allow([^mkdir_p$])
! 1179: m4trace:configure.ac:3: -1- m4_pattern_allow([^AWK$])
! 1180: m4trace:configure.ac:3: -1- m4_pattern_allow([^SET_MAKE$])
! 1181: m4trace:configure.ac:3: -1- AM_SET_LEADING_DOT
! 1182: m4trace:configure.ac:3: -1- m4_pattern_allow([^am__leading_dot$])
! 1183: m4trace:configure.ac:3: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
! 1184: [_AM_PROG_TAR([v7])])])
! 1185: m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([tar-ustar])
! 1186: m4trace:configure.ac:3: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])
! 1187: m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([tar-pax])
! 1188: m4trace:configure.ac:3: -1- _AM_PROG_TAR([v7])
! 1189: m4trace:configure.ac:3: -1- m4_pattern_allow([^AMTAR$])
! 1190: m4trace:configure.ac:3: -1- m4_pattern_allow([^am__tar$])
! 1191: m4trace:configure.ac:3: -1- m4_pattern_allow([^am__untar$])
! 1192: m4trace:configure.ac:3: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC],
! 1193: [_AM_DEPENDENCIES([CC])],
! 1194: [m4_define([AC_PROG_CC],
! 1195: m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
! 1196: AC_PROVIDE_IFELSE([AC_PROG_CXX],
! 1197: [_AM_DEPENDENCIES([CXX])],
! 1198: [m4_define([AC_PROG_CXX],
! 1199: m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
! 1200: AC_PROVIDE_IFELSE([AC_PROG_OBJC],
! 1201: [_AM_DEPENDENCIES([OBJC])],
! 1202: [m4_define([AC_PROG_OBJC],
! 1203: m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
! 1204: AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
! 1205: [_AM_DEPENDENCIES([OBJCXX])],
! 1206: [m4_define([AC_PROG_OBJCXX],
! 1207: m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
! 1208: ])
! 1209: m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([no-dependencies])
! 1210: m4trace:configure.ac:3: -1- AM_SILENT_RULES
! 1211: m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_V$])
! 1212: m4trace:configure.ac:3: -1- AM_SUBST_NOTMAKE([AM_V])
! 1213: m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_V])
! 1214: m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_V$])
! 1215: m4trace:configure.ac:3: -1- AM_SUBST_NOTMAKE([AM_DEFAULT_V])
! 1216: m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V])
! 1217: m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$])
! 1218: m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_BACKSLASH$])
! 1219: m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH])
! 1220: m4trace:configure.ac:7: -1- m4_pattern_allow([^GTK_OBJ$])
! 1221: m4trace:configure.ac:8: -1- m4_pattern_allow([^CURSES_OBJ$])
! 1222: m4trace:configure.ac:13: -1- m4_pattern_allow([^CC$])
! 1223: m4trace:configure.ac:13: -1- m4_pattern_allow([^CFLAGS$])
! 1224: m4trace:configure.ac:13: -1- m4_pattern_allow([^LDFLAGS$])
! 1225: m4trace:configure.ac:13: -1- m4_pattern_allow([^LIBS$])
! 1226: m4trace:configure.ac:13: -1- m4_pattern_allow([^CPPFLAGS$])
! 1227: m4trace:configure.ac:13: -1- m4_pattern_allow([^CC$])
! 1228: m4trace:configure.ac:13: -1- m4_pattern_allow([^CC$])
! 1229: m4trace:configure.ac:13: -1- m4_pattern_allow([^CC$])
! 1230: m4trace:configure.ac:13: -1- m4_pattern_allow([^CC$])
! 1231: m4trace:configure.ac:13: -1- m4_pattern_allow([^ac_ct_CC$])
! 1232: m4trace:configure.ac:13: -1- m4_pattern_allow([^EXEEXT$])
! 1233: m4trace:configure.ac:13: -1- m4_pattern_allow([^OBJEXT$])
! 1234: m4trace:configure.ac:13: -1- _AM_PROG_CC_C_O
! 1235: m4trace:configure.ac:13: -1- AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext])
! 1236: m4trace:configure.ac:13: -1- _AM_DEPENDENCIES([CC])
! 1237: m4trace:configure.ac:13: -1- AM_SET_DEPDIR
! 1238: m4trace:configure.ac:13: -1- m4_pattern_allow([^DEPDIR$])
! 1239: m4trace:configure.ac:13: -1- AM_OUTPUT_DEPENDENCY_COMMANDS
! 1240: m4trace:configure.ac:13: -1- AM_MAKE_INCLUDE
! 1241: m4trace:configure.ac:13: -1- m4_pattern_allow([^am__include$])
! 1242: m4trace:configure.ac:13: -1- m4_pattern_allow([^am__quote$])
! 1243: m4trace:configure.ac:13: -1- AM_DEP_TRACK
! 1244: m4trace:configure.ac:13: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
! 1245: m4trace:configure.ac:13: -1- m4_pattern_allow([^AMDEP_TRUE$])
! 1246: m4trace:configure.ac:13: -1- m4_pattern_allow([^AMDEP_FALSE$])
! 1247: m4trace:configure.ac:13: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE])
! 1248: m4trace:configure.ac:13: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE])
! 1249: m4trace:configure.ac:13: -1- m4_pattern_allow([^AMDEPBACKSLASH$])
! 1250: m4trace:configure.ac:13: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])
! 1251: m4trace:configure.ac:13: -1- m4_pattern_allow([^am__nodep$])
! 1252: m4trace:configure.ac:13: -1- _AM_SUBST_NOTMAKE([am__nodep])
! 1253: m4trace:configure.ac:13: -1- m4_pattern_allow([^CCDEPMODE$])
! 1254: m4trace:configure.ac:13: -1- AM_CONDITIONAL([am__fastdepCC], [
! 1255: test "x$enable_dependency_tracking" != xno \
! 1256: && test "$am_cv_CC_dependencies_compiler_type" = gcc3])
! 1257: m4trace:configure.ac:13: -1- m4_pattern_allow([^am__fastdepCC_TRUE$])
! 1258: m4trace:configure.ac:13: -1- m4_pattern_allow([^am__fastdepCC_FALSE$])
! 1259: m4trace:configure.ac:13: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE])
! 1260: m4trace:configure.ac:13: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE])
! 1261: m4trace:configure.ac:15: -1- m4_pattern_allow([^CPP$])
! 1262: m4trace:configure.ac:15: -1- m4_pattern_allow([^CPPFLAGS$])
! 1263: m4trace:configure.ac:15: -1- m4_pattern_allow([^CPP$])
! 1264: m4trace:configure.ac:15: -1- m4_pattern_allow([^GREP$])
! 1265: m4trace:configure.ac:15: -1- m4_pattern_allow([^EGREP$])
! 1266: m4trace:configure.ac:15: -1- m4_pattern_allow([^STDC_HEADERS$])
! 1267: m4trace:configure.ac:15: -1- m4_pattern_allow([^SIZEOF_UNSIGNED_CHAR$])
! 1268: m4trace:configure.ac:16: -1- m4_pattern_allow([^SIZEOF_UNSIGNED_SHORT$])
! 1269: m4trace:configure.ac:17: -1- m4_pattern_allow([^SIZEOF_UNSIGNED_INT$])
! 1270: m4trace:configure.ac:18: -1- m4_pattern_allow([^SIZEOF_UNSIGNED_LONG$])
! 1271: m4trace:configure.ac:26: -1- m4_pattern_allow([^HAVE_LIBTERMCAP$])
! 1272: m4trace:configure.ac:27: -1- m4_pattern_allow([^HAVE_LIBTINFO$])
! 1273: m4trace:configure.ac:34: -5- m4_pattern_allow([^NO_CURSES$])
! 1274: m4trace:configure.ac:32: -4- m4_pattern_allow([^HAVE_LIBCURSESX$])
! 1275: m4trace:configure.ac:31: -3- m4_pattern_allow([^HAVE_LIBCURSES$])
! 1276: m4trace:configure.ac:30: -2- m4_pattern_allow([^HAVE_LIBNCURSES$])
! 1277: m4trace:configure.ac:39: -1- m4_pattern_allow([^HAVE_LIBM$])
! 1278: m4trace:configure.ac:48: -1- AM_CONDITIONAL([IPINFO], [test x$ipinfo = xyes])
! 1279: m4trace:configure.ac:48: -1- m4_pattern_allow([^IPINFO_TRUE$])
! 1280: m4trace:configure.ac:48: -1- m4_pattern_allow([^IPINFO_FALSE$])
! 1281: m4trace:configure.ac:48: -1- _AM_SUBST_NOTMAKE([IPINFO_TRUE])
! 1282: m4trace:configure.ac:48: -1- _AM_SUBST_NOTMAKE([IPINFO_FALSE])
! 1283: m4trace:configure.ac:66: -2- m4_pattern_allow([^NO_GTK$])
! 1284: m4trace:configure.ac:63: -1- AM_PATH_GTK_2_0([2.6.0], [CFLAGS="$CFLAGS $GTK_CFLAGS"
! 1285: LIBS="$LIBS $GTK_LIBS -lm"], [{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Building without GTK2 display support" >&5
! 1286: $as_echo "$as_me: WARNING: Building without GTK2 display support" >&2;}
! 1287:
! 1288: $as_echo "@%:@define NO_GTK 1" >>confdefs.h
! 1289:
! 1290: GTK_OBJ=""])
! 1291: m4trace:configure.ac:63: -1- PKG_PROG_PKG_CONFIG
! 1292: m4trace:configure.ac:63: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$])
! 1293: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
! 1294: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
! 1295: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG$])
! 1296: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG_PATH$])
! 1297: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG_LIBDIR$])
! 1298: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG$])
! 1299: m4trace:configure.ac:63: -1- PKG_PROG_PKG_CONFIG([0.7])
! 1300: m4trace:configure.ac:63: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$])
! 1301: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
! 1302: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
! 1303: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG$])
! 1304: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG_PATH$])
! 1305: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG_LIBDIR$])
! 1306: m4trace:configure.ac:63: -1- m4_pattern_allow([^PKG_CONFIG$])
! 1307: m4trace:configure.ac:63: -1- _m4_warn([obsolete], [The macro `AC_TRY_RUN' is obsolete.
! 1308: You should run autoupdate.], [../../lib/autoconf/general.m4:2764: AC_TRY_RUN is expanded from...
! 1309: /usr/local/share/aclocal/gtk-2.0.m4:8: AM_PATH_GTK_2_0 is expanded from...
! 1310: configure.ac:63: the top level])
! 1311: m4trace:configure.ac:63: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
! 1312: You should run autoupdate.], [../../lib/autoconf/general.m4:2687: AC_TRY_LINK is expanded from...
! 1313: /usr/local/share/aclocal/gtk-2.0.m4:8: AM_PATH_GTK_2_0 is expanded from...
! 1314: configure.ac:63: the top level])
! 1315: m4trace:configure.ac:63: -1- m4_pattern_allow([^GTK_CFLAGS$])
! 1316: m4trace:configure.ac:63: -1- m4_pattern_allow([^GTK_LIBS$])
! 1317: m4trace:configure.ac:69: -1- m4_pattern_allow([^NO_GTK$])
! 1318: m4trace:configure.ac:74: -1- m4_pattern_allow([^NO_IPINFO$])
! 1319: m4trace:configure.ac:78: -2- m4_pattern_allow([^HAVE_LIBSOCKET$])
! 1320: m4trace:configure.ac:81: -2- m4_pattern_allow([^HAVE_LIBNSL$])
! 1321: m4trace:configure.ac:87: -1- m4_pattern_allow([^HAVE_SETEUID$])
! 1322: m4trace:configure.ac:97: -1- m4_pattern_allow([^RESOLV_LIBS$])
! 1323: m4trace:configure.ac:98: -1- AC_DEFUN([LIBRESOLVTEST_SRC], [
! 1324: AC_LANG_PROGRAM([[
! 1325: #include <netinet/in.h>
! 1326: #include <resolv.h>
! 1327: ]], [[
! 1328: int (*res_mkquery_func)(int,...) = (int (*)(int,...))res_mkquery;
! 1329: (void)(*res_mkquery_func)(0);
! 1330: ]])])
! 1331: m4trace:configure.ac:108: -1- LIBRESOLVTEST_SRC
! 1332: m4trace:configure.ac:116: -1- LIBRESOLVTEST_SRC
! 1333: m4trace:configure.ac:123: -1- LIBRESOLVTEST_SRC
! 1334: m4trace:configure.ac:132: -2- m4_pattern_allow([^NO_HERROR$])
! 1335: m4trace:configure.ac:133: -2- m4_pattern_allow([^NO_STRERROR$])
! 1336: m4trace:configure.ac:136: -1- m4_pattern_allow([^ENABLE_IPV6$])
! 1337: m4trace:configure.ac:142: -1- AC_DEFUN([NEED_RES_STATE_EXT_TEST_SRC], [
! 1338: AC_LANG_PROGRAM([[
! 1339: #include <netinet/in.h>
! 1340: #include <resolv.h>
! 1341: #ifdef __GLIBC__
! 1342: #define RESEXTIN6(r,i) (*(r._u._ext.nsaddrs[i]))
! 1343: #else
! 1344: #define RESEXTIN6(r,i) (r._u._ext.ext->nsaddrs[i].sin6)
! 1345: #endif
! 1346: ]], [[
! 1347: struct __res_state res;
! 1348: return RESEXTIN6(res,0).sin6_addr.s6_addr[0];
! 1349: ]])])
! 1350: m4trace:configure.ac:155: -1- AC_DEFUN([DEFINE_RES_STATE_EXT_TEST_SRC], [
! 1351: AC_LANG_PROGRAM([[
! 1352: #include <netinet/in.h>
! 1353: #include <resolv.h>
! 1354: #ifdef __GLIBC__
! 1355: #define RESEXTIN6(r,i) (*(r._u._ext.nsaddrs[i]))
! 1356: #else
! 1357: #define RESEXTIN6(r,i) (r._u._ext.ext->nsaddrs[i].sin6)
! 1358: struct __res_state_ext {
! 1359: union res_sockaddr_union nsaddrs[MAXNS];
! 1360: struct sort_list {
! 1361: int af;
! 1362: union {
! 1363: struct in_addr ina;
! 1364: struct in6_addr in6a;
! 1365: } addr, mask;
! 1366: } sort_list[MAXRESOLVSORT];
! 1367: char nsuffix[64];
! 1368: char nsuffix2[64];
! 1369: };
! 1370: #endif
! 1371: ]], [[
! 1372: struct __res_state res;
! 1373: return RESEXTIN6(res,0).sin6_addr.s6_addr[0];
! 1374: ]])])
! 1375: m4trace:configure.ac:182: -1- NEED_RES_STATE_EXT_TEST_SRC
! 1376: m4trace:configure.ac:182: -1- DEFINE_RES_STATE_EXT_TEST_SRC
! 1377: m4trace:configure.ac:182: -1- m4_pattern_allow([^NEED_RES_STATE_EXT$])
! 1378: m4trace:configure.ac:193: -1- m4_pattern_allow([^HAVE_DECL_ERRNO$])
! 1379: m4trace:configure.ac:198: -2- m4_pattern_allow([^HAVE_SOCKLEN_T$])
! 1380: m4trace:configure.ac:208: -2- m4_pattern_allow([^HAVE_STRUCT_INADDR$])
! 1381: m4trace:configure.ac:260: -1- m4_pattern_allow([^LIB@&t@OBJS$])
! 1382: m4trace:configure.ac:260: -1- m4_pattern_allow([^LTLIBOBJS$])
! 1383: m4trace:configure.ac:260: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])
! 1384: m4trace:configure.ac:260: -1- m4_pattern_allow([^am__EXEEXT_TRUE$])
! 1385: m4trace:configure.ac:260: -1- m4_pattern_allow([^am__EXEEXT_FALSE$])
! 1386: m4trace:configure.ac:260: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE])
! 1387: m4trace:configure.ac:260: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE])
! 1388: m4trace:configure.ac:260: -1- _AC_AM_CONFIG_HEADER_HOOK(["$ac_file"])
! 1389: m4trace:configure.ac:260: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>