[BACK]Return to configure CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / mtr

Diff for /embedaddon/mtr/configure between versions 1.1.1.1 and 1.1.1.2

version 1.1.1.1, 2013/07/21 23:43:42 version 1.1.1.2, 2016/11/01 09:33:48
Line 1 Line 1
 #! /bin/sh  #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.  # Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.68 for mtr 0.85.# Generated by GNU Autoconf 2.69 for mtr 0.86.
 #  #
 #  #
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software 
# Foundation, Inc. 
 #  #
 #  #
 # This configure script is free software; the Free Software Foundation  # This configure script is free software; the Free Software Foundation
Line 134  export LANGUAGE Line 132  export LANGUAGE
 # CDPATH.  # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH  (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
   
   # Use a proper internal environment variable to ensure we don't fall
     # into an infinite loop, continuously re-executing ourselves.
     if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
       _as_can_reexec=no; export _as_can_reexec;
       # We cannot yet assume a decent shell, so we have to provide a
   # neutralization value for shells without unset; and this also
   # works around shells that cannot unset nonexistent variables.
   # Preserve -v and -x to the replacement shell.
   BASH_ENV=/dev/null
   ENV=/dev/null
   (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
   case $- in # ((((
     *v*x* | *x*v* ) as_opts=-vx ;;
     *v* ) as_opts=-v ;;
     *x* ) as_opts=-x ;;
     * ) as_opts= ;;
   esac
   exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
   # Admittedly, this is quite paranoid, since all the known shells bail
   # out after a failed `exec'.
   $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
   as_fn_exit 255
     fi
     # We don't want this to propagate to other subprocesses.
             { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then  if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :    as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh    emulate sh
Line 167  if ( set x; as_fn_ret_success y && test x = \"\$1\" ); Line 190  if ( set x; as_fn_ret_success y && test x = \"\$1\" );
 else  else
   exitcode=1; echo positional parameters were not saved.    exitcode=1; echo positional parameters were not saved.
 fi  fi
test x\$exitcode = x0 || exit 1"test x\$exitcode = x0 || exit 1
 test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO    as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO    as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&    eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
Line 212  IFS=$as_save_IFS Line 236  IFS=$as_save_IFS
   
   
       if test "x$CONFIG_SHELL" != x; then :        if test "x$CONFIG_SHELL" != x; then :
  # We cannot yet assume a decent shell, so we have to provide a  export CONFIG_SHELL
        # neutralization value for shells without unset; and this also             # We cannot yet assume a decent shell, so we have to provide a
        # works around shells that cannot unset nonexistent variables.# neutralization value for shells without unset; and this also
        # Preserve -v and -x to the replacement shell.# works around shells that cannot unset nonexistent variables.
        BASH_ENV=/dev/null# Preserve -v and -x to the replacement shell.
        ENV=/dev/nullBASH_ENV=/dev/null
        (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENVENV=/dev/null
        export CONFIG_SHELL(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
        case $- in # ((((case $- in # ((((
          *v*x* | *x*v* ) as_opts=-vx ;;  *v*x* | *x*v* ) as_opts=-vx ;;
          *v* ) as_opts=-v ;;  *v* ) as_opts=-v ;;
          *x* ) as_opts=-x ;;  *x* ) as_opts=-x ;;
          * ) as_opts= ;;  * ) as_opts= ;;
        esacesac
        exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
 # Admittedly, this is quite paranoid, since all the known shells bail
 # out after a failed `exec'.
 $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
 exit 255
 fi  fi
   
     if test x$as_have_required = xno; then :      if test x$as_have_required = xno; then :
Line 328  $as_echo X"$as_dir" | Line 356  $as_echo X"$as_dir" |
   
   
 } # as_fn_mkdir_p  } # as_fn_mkdir_p
   
   # as_fn_executable_p FILE
   # -----------------------
   # Test if FILE is an executable regular file.
   as_fn_executable_p ()
   {
     test -f "$1" && test -x "$1"
   } # as_fn_executable_p
 # as_fn_append VAR VALUE  # as_fn_append VAR VALUE
 # ----------------------  # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take  # Append the text in VALUE to the end of the definition contained in VAR. Take
Line 449  as_cr_alnum=$as_cr_Letters$as_cr_digits Line 485  as_cr_alnum=$as_cr_Letters$as_cr_digits
   chmod +x "$as_me.lineno" ||    chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }      { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
   
     # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
     # already done that, so ensure we don't try to do so again and fall
     # in an infinite loop.  This has already happened in practice.
     _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems    # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the    # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).    # original and so on.  Autoconf is especially sensitive to this).
Line 483  if (echo >conf$$.file) 2>/dev/null; then Line 523  if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:      # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.      # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.      # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
    # In both cases, we have to default to `cp -p'.    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||      ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
      as_ln_s='cp -p'      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then    elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln      as_ln_s=ln
   else    else
    as_ln_s='cp -p'    as_ln_s='cp -pR'
   fi    fi
 else  else
  as_ln_s='cp -p'  as_ln_s='cp -pR'
 fi  fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file  rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null  rmdir conf$$.dir 2>/dev/null
Line 504  else Line 544  else
   as_mkdir_p=false    as_mkdir_p=false
 fi  fi
   
if test -x / >/dev/null 2>&1; thenas_test_x='test -x'
  as_test_x='test -x'as_executable_p=as_fn_executable_p
else 
  if ls -dL / >/dev/null 2>&1; then 
    as_ls_L_option=L 
  else 
    as_ls_L_option= 
  fi 
  as_test_x=' 
    eval sh -c '\'' 
      if test -d "$1"; then 
        test -d "$1/."; 
      else 
        case $1 in #( 
        -*)set "./$1";; 
        esac; 
        case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( 
        ???[sx]*):;;*)false;;esac;fi 
    '\'' sh 
  ' 
fi 
as_executable_p=$as_test_x 
   
 # Sed expression to map a string onto a valid CPP name.  # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"  as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
Line 557  MAKEFLAGS= Line 577  MAKEFLAGS=
 # Identity of this package.  # Identity of this package.
 PACKAGE_NAME='mtr'  PACKAGE_NAME='mtr'
 PACKAGE_TARNAME='mtr'  PACKAGE_TARNAME='mtr'
PACKAGE_VERSION='0.85'PACKAGE_VERSION='0.86'
PACKAGE_STRING='mtr 0.85'PACKAGE_STRING='mtr 0.86'
 PACKAGE_BUGREPORT=''  PACKAGE_BUGREPORT=''
 PACKAGE_URL=''  PACKAGE_URL=''
   
Line 604  am__EXEEXT_TRUE Line 624  am__EXEEXT_TRUE
 LTLIBOBJS  LTLIBOBJS
 LIBOBJS  LIBOBJS
 RESOLV_LIBS  RESOLV_LIBS
 GLIB_LIBS  
 GLIB_CFLAGS  
 PKG_CONFIG_LIBDIR  
 PKG_CONFIG_PATH  
 GTK_LIBS  GTK_LIBS
 GTK_CFLAGS  GTK_CFLAGS
 PKG_CONFIG  PKG_CONFIG
Line 619  CPP Line 635  CPP
 am__fastdepCC_FALSE  am__fastdepCC_FALSE
 am__fastdepCC_TRUE  am__fastdepCC_TRUE
 CCDEPMODE  CCDEPMODE
   am__nodep
 AMDEPBACKSLASH  AMDEPBACKSLASH
 AMDEP_FALSE  AMDEP_FALSE
 AMDEP_TRUE  AMDEP_TRUE
Line 634  CFLAGS Line 651  CFLAGS
 CC  CC
 CURSES_OBJ  CURSES_OBJ
 GTK_OBJ  GTK_OBJ
   AM_BACKSLASH
   AM_DEFAULT_VERBOSITY
   AM_DEFAULT_V
   AM_V
 am__untar  am__untar
 am__tar  am__tar
 AMTAR  AMTAR
Line 698  SHELL' Line 719  SHELL'
 ac_subst_files=''  ac_subst_files=''
 ac_user_opts='  ac_user_opts='
 enable_option_checking  enable_option_checking
   enable_silent_rules
 enable_dependency_tracking  enable_dependency_tracking
 with_gtk  with_gtk
 with_glib  
 with_ipinfo  with_ipinfo
 enable_ipv6  enable_ipv6
 enable_gtktest  enable_gtktest
Line 713  CFLAGS Line 734  CFLAGS
 LDFLAGS  LDFLAGS
 LIBS  LIBS
 CPPFLAGS  CPPFLAGS
CPPCPP'
PKG_CONFIG 
PKG_CONFIG_PATH 
PKG_CONFIG_LIBDIR 
GLIB_CFLAGS 
GLIB_LIBS' 
   
   
 # Initialize some variables set by options.  # Initialize some variables set by options.
Line 1174  target=$target_alias Line 1190  target=$target_alias
 if test "x$host_alias" != x; then  if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then    if test "x$build_alias" = x; then
     cross_compiling=maybe      cross_compiling=maybe
     $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.  
     If a cross compiler is detected then cross compile mode will be used" >&2  
   elif test "x$build_alias" != "x$host_alias"; then    elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes      cross_compiling=yes
   fi    fi
Line 1261  if test "$ac_init_help" = "long"; then Line 1275  if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.    # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.    # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF    cat <<_ACEOF
\`configure' configures mtr 0.85 to adapt to many kinds of systems.\`configure' configures mtr 0.86 to adapt to many kinds of systems.
   
 Usage: $0 [OPTION]... [VAR=VALUE]...  Usage: $0 [OPTION]... [VAR=VALUE]...
   
Line 1327  fi Line 1341  fi
   
 if test -n "$ac_init_help"; then  if test -n "$ac_init_help"; then
   case $ac_init_help in    case $ac_init_help in
     short | recursive ) echo "Configuration of mtr 0.85:";;     short | recursive ) echo "Configuration of mtr 0.86:";;
    esac     esac
   cat <<\_ACEOF    cat <<\_ACEOF
   
Line 1335  Optional Features: Line 1349  Optional Features:
   --disable-option-checking  ignore unrecognized --enable/--with options    --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)    --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]    --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --disable-dependency-tracking  speeds up one-time build  --enable-silent-rules   less verbose build output (undo: "make V=1")
  --enable-dependency-tracking   do not reject slow dependency extractors  --disable-silent-rules  verbose build output (undo: "make V=0")
   --enable-dependency-tracking
                           do not reject slow dependency extractors
   --disable-dependency-tracking
                           speeds up one-time build
   --disable-ipv6          Do not enable IPv6    --disable-ipv6          Do not enable IPv6
   --disable-gtktest       do not try to compile and run a test GTK+ program    --disable-gtktest       do not try to compile and run a test GTK+ program
   
Line 1344  Optional Packages: Line 1362  Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]    --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)    --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
   --without-gtk           Do not try to use GTK+ at all    --without-gtk           Do not try to use GTK+ at all
   --without-glib          Do not try to use glib at all  
   --without-ipinfo        Do not try to use ipinfo lookup at all    --without-ipinfo        Do not try to use ipinfo lookup at all
   
 Some influential environment variables:  Some influential environment variables:
Line 1356  Some influential environment variables: Line 1373  Some influential environment variables:
   CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if    CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
               you have headers in a nonstandard directory <include dir>                you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor    CPP         C preprocessor
   PKG_CONFIG  path to pkg-config utility  
   PKG_CONFIG_PATH  
               directories to add to pkg-config's search path  
   PKG_CONFIG_LIBDIR  
               path overriding pkg-config's built-in search path  
   GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config  
   GLIB_LIBS   linker flags for GLIB, overriding pkg-config  
   
 Use these variables to override the choices made by `configure' or to help  Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.  it to find libraries and programs with nonstandard names/locations.
Line 1430  fi Line 1440  fi
 test -n "$ac_init_help" && exit $ac_status  test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then  if $ac_init_version; then
   cat <<\_ACEOF    cat <<\_ACEOF
mtr configure 0.85mtr configure 0.86
generated by GNU Autoconf 2.68generated by GNU Autoconf 2.69
   
Copyright (C) 2010 Free Software Foundation, Inc.Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation  This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.  gives unlimited permission to copy, distribute and modify it.
 _ACEOF  _ACEOF
Line 1541  int Line 1551  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) >= 0)];  static int test_array [1 - 2 * !(($2) >= 0)];
test_array [0] = 0test_array [0] = 0;
 return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1557  int Line 1568  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) <= $ac_mid)];  static int test_array [1 - 2 * !(($2) <= $ac_mid)];
test_array [0] = 0test_array [0] = 0;
 return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1583  int Line 1595  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) < 0)];  static int test_array [1 - 2 * !(($2) < 0)];
test_array [0] = 0test_array [0] = 0;
 return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1599  int Line 1612  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) >= $ac_mid)];  static int test_array [1 - 2 * !(($2) >= $ac_mid)];
test_array [0] = 0test_array [0] = 0;
 return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1633  int Line 1647  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) <= $ac_mid)];  static int test_array [1 - 2 * !(($2) <= $ac_mid)];
test_array [0] = 0test_array [0] = 0;
 return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1884  $as_echo "$ac_try_echo"; } >&5 Line 1899  $as_echo "$ac_try_echo"; } >&5
          test ! -s conftest.err           test ! -s conftest.err
        } && test -s conftest$ac_exeext && {         } && test -s conftest$ac_exeext && {
          test "$cross_compiling" = yes ||           test "$cross_compiling" = yes ||
         $as_test_x conftest$ac_exeext         test -x conftest$ac_exeext
        }; then :         }; then :
   ac_retval=0    ac_retval=0
 else  else
Line 2073  cat >config.log <<_ACEOF Line 2088  cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while  This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.  running configure, to aid debugging if configure makes a mistake.
   
It was created by mtr $as_me 0.85, which wasIt was created by mtr $as_me 0.86, which was
generated by GNU Autoconf 2.68.  Invocation command line wasgenerated by GNU Autoconf 2.69.  Invocation command line was
   
   $ $0 $@    $ $0 $@
   
Line 2422  ac_compiler_gnu=$ac_cv_c_compiler_gnu Line 2437  ac_compiler_gnu=$ac_cv_c_compiler_gnu
   
   
   
am__api_version='1.11'am__api_version='1.14'
   
 ac_aux_dir=  ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do  for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
Line 2490  case $as_dir/ in #(( Line 2505  case $as_dir/ in #((
     # by default.      # by default.
     for ac_prog in ginstall scoinst install; do      for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do        for ac_exec_ext in '' $ac_executable_extensions; do
        if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then        if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
           if test $ac_prog = install &&            if test $ac_prog = install &&
             grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then              grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
             # AIX install.  It has an incompatible calling convention.              # AIX install.  It has an incompatible calling convention.
Line 2548  test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m Line 2563  test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m
   
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }  $as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case  
 sleep 1  
 echo timestamp > conftest.file  
 # Reject unsafe characters in $srcdir or the absolute working directory  # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.  # name.  Accept space and tab only in the latter.
 am_lf='  am_lf='
Line 2561  case `pwd` in Line 2573  case `pwd` in
 esac  esac
 case $srcdir in  case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \     ]*)    *[\\\"\#\$\&\'\`$am_lf\ \     ]*)
    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac  esac
   
# Do `set' in a subshell so we don't clobber the current shell's# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a  # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks  # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing  # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).  # directory).
 if (  if (
   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`   am_has_slept=no
   if test "$*" = "X"; then   for am_try in 1 2; do
      # -L didn't work.     echo "timestamp, slept: $am_has_slept" > conftest.file
      set X `ls -t "$srcdir/configure" conftest.file`     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
   fi     if test "$*" = "X"; then
   rm -f conftest.file        # -L didn't work.
   if test "$*" != "X $srcdir/configure conftest.file" \        set X `ls -t "$srcdir/configure" conftest.file`
      && test "$*" != "X conftest.file $srcdir/configure"; then     fi
      if test "$*" != "X $srcdir/configure conftest.file" \
         && test "$*" != "X conftest.file $srcdir/configure"; then
   
      # If neither matched, then we have a broken ls.  This can happen        # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a        # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually        # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".        # happened.  Such a system could not be considered "sane".
      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken        as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
alias in your environment" "$LINENO" 5  alias in your environment" "$LINENO" 5
   fi     fi
     if test "$2" = conftest.file || test $am_try -eq 2; then
        break
      fi
      # Just in case.
      sleep 1
      am_has_slept=yes
    done
    test "$2" = conftest.file     test "$2" = conftest.file
    )     )
 then  then
Line 2598  Check your system clock" "$LINENO" 5 Line 2618  Check your system clock" "$LINENO" 5
 fi  fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }  $as_echo "yes" >&6; }
   # If we didn't sleep, we still need to ensure time stamps of config.status and
   # generated files are strictly newer.
   am_sleep_pid=
   if grep 'slept: no' conftest.file >/dev/null 2>&1; then
     ( sleep 1 ) &
     am_sleep_pid=$!
   fi
   
   rm -f conftest.file
   
 test "$program_prefix" != NONE &&  test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"    program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.  # Use a double $ so make ignores it.
Line 2620  if test x"${MISSING+set}" != xset; then Line 2650  if test x"${MISSING+set}" != xset; then
   esac    esac
 fi  fi
 # Use eval to expand $SHELL  # Use eval to expand $SHELL
if eval "$MISSING --run true"; thenif eval "$MISSING --is-lightweight"; then
  am_missing_run="$MISSING --run "  am_missing_run="$MISSING "
 else  else
   am_missing_run=    am_missing_run=
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi  fi
   
 if test x"${install_sh}" != xset; then  if test x"${install_sh}" != xset; then
Line 2637  if test x"${install_sh}" != xset; then Line 2667  if test x"${install_sh}" != xset; then
   esac    esac
 fi  fi
   
# Installed binaries are usually stripped using `strip' when the user# Installed binaries are usually stripped using 'strip' when the user
# run `make install-strip'.  However `strip' might not be the right# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake  # tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.# will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then  if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then    if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.    # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
Line 2659  do Line 2689  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 2699  do Line 2729  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"      ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 2750  do Line 2780  do
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_prog in mkdir gmkdir; do      for ac_prog in mkdir gmkdir; do
          for ac_exec_ext in '' $ac_executable_extensions; do           for ac_exec_ext in '' $ac_executable_extensions; do
           { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue           as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
            case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(             case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
              'mkdir (GNU coreutils) '* | \               'mkdir (GNU coreutils) '* | \
              'mkdir (coreutils) '* | \               'mkdir (coreutils) '* | \
Line 2779  fi Line 2809  fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }  $as_echo "$MKDIR_P" >&6; }
   
 mkdir_p="$MKDIR_P"  
 case $mkdir_p in  
   [\\/$]* | ?:[\\/]*) ;;  
   */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;  
 esac  
   
 for ac_prog in gawk mawk nawk awk  for ac_prog in gawk mawk nawk awk
 do  do
   # Extract the first word of "$ac_prog", so it can be a program name with args.    # Extract the first word of "$ac_prog", so it can be a program name with args.
Line 2803  do Line 2827  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AWK="$ac_prog"      ac_cv_prog_AWK="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 2867  else Line 2891  else
 fi  fi
 rmdir .tst 2>/dev/null  rmdir .tst 2>/dev/null
   
   # Check whether --enable-silent-rules was given.
   if test "${enable_silent_rules+set}" = set; then :
     enableval=$enable_silent_rules;
   fi
   
   case $enable_silent_rules in # (((
     yes) AM_DEFAULT_VERBOSITY=0;;
      no) AM_DEFAULT_VERBOSITY=1;;
       *) AM_DEFAULT_VERBOSITY=1;;
   esac
   am_make=${MAKE-make}
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
   $as_echo_n "checking whether $am_make supports nested variables... " >&6; }
   if ${am_cv_make_support_nested_variables+:} false; then :
     $as_echo_n "(cached) " >&6
   else
     if $as_echo 'TRUE=$(BAR$(V))
   BAR0=false
   BAR1=true
   V=1
   am__doit:
           @$(TRUE)
   .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
     am_cv_make_support_nested_variables=yes
   else
     am_cv_make_support_nested_variables=no
   fi
   fi
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
   $as_echo "$am_cv_make_support_nested_variables" >&6; }
   if test $am_cv_make_support_nested_variables = yes; then
       AM_V='$(V)'
     AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
   else
     AM_V=$AM_DEFAULT_VERBOSITY
     AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
   fi
   AM_BACKSLASH='\'
   
 if test "`cd $srcdir && pwd`" != "`pwd`"; then  if test "`cd $srcdir && pwd`" != "`pwd`"; then
   # Use -I$(srcdir) only when $(srcdir) != ., so that make's output    # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
   # is not polluted with repeated "-I."    # is not polluted with repeated "-I."
Line 2889  fi Line 2952  fi
   
 # Define the identity of the package.  # Define the identity of the package.
  PACKAGE='mtr'   PACKAGE='mtr'
 VERSION='0.85' VERSION='0.86'
   
   
 cat >>confdefs.h <<_ACEOF  cat >>confdefs.h <<_ACEOF
Line 2917  AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} Line 2980  AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
   
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}  MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
   
   # For better backward compatibility.  To be removed once Automake 1.9.x
   # dies out for good.  For more background, see:
   # <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
   # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
   mkdir_p='$(MKDIR_P)'
   
 # We need awk for the "check" target.  The system "awk" is bad on  # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.  # some platforms.
# Always define AMTAR for backward compatibility.# Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AMTAR='$${TAR-tar}'
   
 AMTAR=${AMTAR-"${am_missing_run}tar"}  
   
am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'# We'll loop over all known methods to create a tar archive until one works.
 _am_tools='gnutar  pax cpio none'
   
   am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
   
   
   
   
   
   
   # POSIX will say in a future version that running "rm -f" with no argument
   # is OK; and we want to be able to make that assumption in our Makefile
   # recipes.  So use an aggressive probe to check that the usage we want is
   # actually supported "in the wild" to an acceptable degree.
   # See automake bug#10828.
   # To make any issue more visible, cause the running configure to be aborted
   # by default if the 'rm' program in use doesn't match our expectations; the
   # user can still override this though.
   if rm -f && rm -fr && rm -rf; then : OK; else
     cat >&2 <<'END'
   Oops!
   
   Your 'rm' program seems unable to run without file operands specified
   on the command line, even when the '-f' option is present.  This is contrary
   to the behaviour of most rm programs out there, and not conforming with
   the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
   
   Please tell bug-automake@gnu.org about your system, including the value
   of your $PATH and any error possibly output before this message.  This
   can help us improve future automake versions.
   
   END
     if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
       echo 'Configuration will proceed anyway, since you have set the' >&2
       echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
       echo >&2
     else
       cat >&2 <<'END'
   Aborting the configuration process, to ensure you take notice of the issue.
   
   You can download and install GNU coreutils to get an 'rm' implementation
   that behaves properly: <http://www.gnu.org/software/coreutils/>.
   
   If you want to complete the configuration process using your problematic
   'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
   to "yes", and re-run configure.
   
   END
       as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
     fi
   fi
   
 ac_config_files="$ac_config_files version.h.tmp:version.h.in"  ac_config_files="$ac_config_files version.h.tmp:version.h.in"
   
   
Line 2961  do Line 3076  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"      ac_cv_prog_CC="${ac_tool_prefix}gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3001  do Line 3116  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"      ac_cv_prog_ac_ct_CC="gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3054  do Line 3169  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"      ac_cv_prog_CC="${ac_tool_prefix}cc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3095  do Line 3210  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then      if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes         ac_prog_rejected=yes
        continue         continue
Line 3153  do Line 3268  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"      ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3197  do Line 3312  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"      ac_cv_prog_ac_ct_CC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3643  cat confdefs.h - <<_ACEOF >conftest.$ac_ext Line 3758  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */  /* end confdefs.h.  */
 #include <stdarg.h>  #include <stdarg.h>
 #include <stdio.h>  #include <stdio.h>
#include <sys/types.h>struct stat;
#include <sys/stat.h> 
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */  /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };  struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);  FILE * (*rcsopen) (struct buf *, struct stat *, int);
Line 3728  ac_cpp='$CPP $CPPFLAGS' Line 3842  ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'  ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'  ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu  ac_compiler_gnu=$ac_cv_c_compiler_gnu
   
   ac_ext=c
   ac_cpp='$CPP $CPPFLAGS'
   ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
   ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
   ac_compiler_gnu=$ac_cv_c_compiler_gnu
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
   $as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
   if ${am_cv_prog_cc_c_o+:} false; then :
     $as_echo_n "(cached) " >&6
   else
     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
   /* end confdefs.h.  */
   
   int
   main ()
   {
   
     ;
     return 0;
   }
   _ACEOF
     # Make sure it works both with $CC and with simple cc.
     # Following AC_PROG_CC_C_O, we do the test twice because some
     # compilers refuse to overwrite an existing .o file with -o,
     # though they will create one.
     am_cv_prog_cc_c_o=yes
     for am_i in 1 2; do
       if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
      ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
      ac_status=$?
      echo "$as_me:$LINENO: \$? = $ac_status" >&5
      (exit $ac_status); } \
            && test -f conftest2.$ac_objext; then
         : OK
       else
         am_cv_prog_cc_c_o=no
         break
       fi
     done
     rm -f core conftest*
     unset am_i
   fi
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
   $as_echo "$am_cv_prog_cc_c_o" >&6; }
   if test "$am_cv_prog_cc_c_o" != yes; then
      # Losing compiler, so override with the script.
      # FIXME: It is wrong to rewrite CC.
      # But if we don't then we get into trouble of one sort or another.
      # A longer-term fix would be to have automake use am__CC in this case,
      # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
      CC="$am_aux_dir/compile $CC"
   fi
   ac_ext=c
   ac_cpp='$CPP $CPPFLAGS'
   ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
   ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
   ac_compiler_gnu=$ac_cv_c_compiler_gnu
   
 DEPDIR="${am__leading_dot}deps"  DEPDIR="${am__leading_dot}deps"
   
 ac_config_commands="$ac_config_commands depfiles"  ac_config_commands="$ac_config_commands depfiles"
Line 3747  am__quote= Line 3920  am__quote=
 _am_result=none  _am_result=none
 # First try GNU make style include.  # First try GNU make style include.
 echo "include confinc" > confmf  echo "include confinc" > confmf
# Ignore all kinds of additional output from `make'.# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(  case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)  *the\ am__doit\ target*)
   am__include=include    am__include=include
Line 3780  fi Line 3953  fi
 if test "x$enable_dependency_tracking" != xno; then  if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"    am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'    AMDEPBACKSLASH='\'
     am__nodep='_no'
 fi  fi
  if test "x$enable_dependency_tracking" != xno; then   if test "x$enable_dependency_tracking" != xno; then
   AMDEP_TRUE=    AMDEP_TRUE=
Line 3802  else Line 3976  else
   # We make a subdir and do the tests there.  Otherwise we can end up    # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For    # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up    # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named `D' -- because `-MD' means `put the output  # making a dummy file named 'D' -- because '-MD' means "put the output
  # in D'.  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir    mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're    # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.    # using a relative directory.
Line 3837  else Line 4012  else
     : > sub/conftest.c      : > sub/conftest.c
     for i in 1 2 3 4 5 6; do      for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c        echo '#include "conftst'$i'.h"' >> sub/conftest.c
      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
      # Solaris 8's {/usr,}/bin/sh.      # Solaris 10 /bin/sh.
      touch sub/conftst$i.h      echo '/* dummy */' > sub/conftst$i.h
     done      done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf      echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
   
    # We check with `-c' and `-o' for the sake of the "dashmstdout"    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly      # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle `-M -o', and we need to detect this.  Also, some Intel    # handle '-M -o', and we need to detect this.  Also, some Intel
    # versions had trouble with output in subdirs    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}      am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"      am__minus_obj="-o $am__obj"
     case $depmode in      case $depmode in
Line 3855  else Line 4030  else
       test "$am__universal" = false || continue        test "$am__universal" = false || continue
       ;;        ;;
     nosideeffect)      nosideeffect)
      # after this tag, mechanisms are not by side-effect, so they'll      # After this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then        if test "x$enable_dependency_tracking" = xyes; then
         continue          continue
       else        else
         break          break
       fi        fi
       ;;        ;;
    msvisualcpp | msvcmsys)    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
      # This compiler won't grok `-c -o', but also, the minuso test has      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and        # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.        # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}        am__obj=conftest.${OBJEXT-o}
Line 4074  do Line 4249  do
     for ac_prog in grep ggrep; do      for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"        ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue      as_fn_executable_p "$ac_path_GREP" || continue
 # Check for GNU ac_path_GREP and select it if it is found.  # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP    # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in  case `"$ac_path_GREP" --version 2>&1` in
Line 4140  do Line 4315  do
     for ac_prog in egrep; do      for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"        ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue      as_fn_executable_p "$ac_path_EGREP" || continue
 # Check for GNU ac_path_EGREP and select it if it is found.  # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP    # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in  case `"$ac_path_EGREP" --version 2>&1` in
Line 4793  fi Line 4968  fi
   
   
   
 # Check whether --with-glib was given.  
 if test "${with_glib+set}" = set; then :  
   withval=$with_glib; WANTS_GLIB=$withval  
 else  
   WANTS_GLIB=yes  
 fi  
   
   
   
 # Check whether --with-ipinfo was given.  # Check whether --with-ipinfo was given.
 if test "${with_ipinfo+set}" = set; then :  if test "${with_ipinfo+set}" = set; then :
  withval=$with_ipinfo; case "${withval}" in  withval=$with_ipinfo; ipinfo="${withval}"
  yes) ipinfo=true ;; 
  no)  ipinfo=false ;; 
  *) as_fn_error $? "bad value ${withval} for --with-ipinfo" "$LINENO" 5 ;; 
esac 
 else  else
  ipinfo=true  ipinfo=yes
 fi  fi
   
 if test x$ipinfo = xtrue; then if test x$ipinfo = xyes; then
   IPINFO_TRUE=    IPINFO_TRUE=
   IPINFO_FALSE='#'    IPINFO_FALSE='#'
 else  else
Line 4821  else Line 4983  else
   IPINFO_FALSE=    IPINFO_FALSE=
 fi  fi
   
 if test "x$ipinfo" = "xfalse"; then  
   
 $as_echo "#define NO_IPINFO 1" >>confdefs.h  
   
 fi  
   
 # Check whether --enable-ipv6 was given.  # Check whether --enable-ipv6 was given.
 if test "${enable_ipv6+set}" = set; then :  if test "${enable_ipv6+set}" = set; then :
   enableval=$enable_ipv6; WANTS_IPV6=$enableval    enableval=$enable_ipv6; WANTS_IPV6=$enableval
Line 4835  else Line 4992  else
 fi  fi
   
   
   
   
 if test "x$WANTS_GTK" = "xyes"; then  if test "x$WANTS_GTK" = "xyes"; then
         # Check whether --enable-gtktest was given.          # Check whether --enable-gtktest was given.
 if test "${enable_gtktest+set}" = set; then :  if test "${enable_gtktest+set}" = set; then :
Line 4874  do Line 5033  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"      ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 5105  else Line 5264  else
         $as_echo "#define NO_GTK 1" >>confdefs.h          $as_echo "#define NO_GTK 1" >>confdefs.h
   
         GTK_OBJ=""          GTK_OBJ=""
         if test "x$WANTS_GLIB" = "xyes"; then  
   
   
   
   
   
   
   
 if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then  
         if test -n "$ac_tool_prefix"; then  
   # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.  
 set dummy ${ac_tool_prefix}pkg-config; ac_word=$2  
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5  
 $as_echo_n "checking for $ac_word... " >&6; }  
 if ${ac_cv_path_PKG_CONFIG+:} false; then :  
   $as_echo_n "(cached) " >&6  
 else  
   case $PKG_CONFIG in  
   [\\/]* | ?:[\\/]*)  
   ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.  
   ;;  
   *)  
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR  
 for as_dir in $PATH  
 do  
   IFS=$as_save_IFS  
   test -z "$as_dir" && as_dir=.  
     for ac_exec_ext in '' $ac_executable_extensions; do  
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then  
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"  
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5  
     break 2  
   fi  
 done  
   done  
 IFS=$as_save_IFS  
   
   ;;  
 esac  
 fi  fi
 PKG_CONFIG=$ac_cv_path_PKG_CONFIG  
 if test -n "$PKG_CONFIG"; then  
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5  
 $as_echo "$PKG_CONFIG" >&6; }  
 else  
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5  
 $as_echo "no" >&6; }  
 fi  
   
   if test "x$ipinfo" = "xno"; then
   
fi$as_echo "#define NO_IPINFO 1" >>confdefs.h
if test -z "$ac_cv_path_PKG_CONFIG"; then 
  ac_pt_PKG_CONFIG=$PKG_CONFIG 
  # Extract the first word of "pkg-config", so it can be a program name with args. 
set dummy pkg-config; ac_word=$2 
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 
$as_echo_n "checking for $ac_word... " >&6; } 
if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : 
  $as_echo_n "(cached) " >&6 
else 
  case $ac_pt_PKG_CONFIG in 
  [\\/]* | ?:[\\/]*) 
  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. 
  ;; 
  *) 
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR 
for as_dir in $PATH 
do 
  IFS=$as_save_IFS 
  test -z "$as_dir" && as_dir=. 
    for ac_exec_ext in '' $ac_executable_extensions; do 
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then 
    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" 
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 
    break 2 
  fi 
done 
  done 
IFS=$as_save_IFS 
   
   ;;  
 esac  
 fi  fi
 ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG  
 if test -n "$ac_pt_PKG_CONFIG"; then  
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5  
 $as_echo "$ac_pt_PKG_CONFIG" >&6; }  
 else  
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5  
 $as_echo "no" >&6; }  
 fi  
   
   if test "x$ac_pt_PKG_CONFIG" = x; then  
     PKG_CONFIG=""  
   else  
     case $cross_compiling:$ac_tool_warned in  
 yes:)  
 { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5  
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}  
 ac_tool_warned=yes ;;  
 esac  
     PKG_CONFIG=$ac_pt_PKG_CONFIG  
   fi  
 else  
   PKG_CONFIG="$ac_cv_path_PKG_CONFIG"  
 fi  
   
 fi  
 if test -n "$PKG_CONFIG"; then  
         _pkg_min_version=0.9.0  
         { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5  
 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }  
         if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then  
                 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5  
 $as_echo "yes" >&6; }  
         else  
                 { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5  
 $as_echo "no" >&6; }  
                 PKG_CONFIG=""  
         fi  
 fi  
   
 pkg_failed=no  
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLIB" >&5  
 $as_echo_n "checking for GLIB... " >&6; }  
   
 if test -n "$GLIB_CFLAGS"; then  
     pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS"  
  elif test -n "$PKG_CONFIG"; then  
     if test -n "$PKG_CONFIG" && \  
     { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0\""; } >&5  
   ($PKG_CONFIG --exists --print-errors "glib-2.0") 2>&5  
   ac_status=$?  
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5  
   test $ac_status = 0; }; then  
   pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0" 2>/dev/null`  
                       test "x$?" != "x0" && pkg_failed=yes  
 else  
   pkg_failed=yes  
 fi  
  else  
     pkg_failed=untried  
 fi  
 if test -n "$GLIB_LIBS"; then  
     pkg_cv_GLIB_LIBS="$GLIB_LIBS"  
  elif test -n "$PKG_CONFIG"; then  
     if test -n "$PKG_CONFIG" && \  
     { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0\""; } >&5  
   ($PKG_CONFIG --exists --print-errors "glib-2.0") 2>&5  
   ac_status=$?  
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5  
   test $ac_status = 0; }; then  
   pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0" 2>/dev/null`  
                       test "x$?" != "x0" && pkg_failed=yes  
 else  
   pkg_failed=yes  
 fi  
  else  
     pkg_failed=untried  
 fi  
   
   
   
 if test $pkg_failed = yes; then  
         { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5  
 $as_echo "no" >&6; }  
   
 if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then  
         _pkg_short_errors_supported=yes  
 else  
         _pkg_short_errors_supported=no  
 fi  
         if test $_pkg_short_errors_supported = yes; then  
                 GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "glib-2.0" 2>&1`  
         else  
                 GLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "glib-2.0" 2>&1`  
         fi  
         # Put the nasty error message in config.log where it belongs  
         echo "$GLIB_PKG_ERRORS" >&5  
   
         as_fn_error $? "Package requirements (glib-2.0) were not met:  
   
 $GLIB_PKG_ERRORS  
   
 Consider adjusting the PKG_CONFIG_PATH environment variable if you  
 installed software in a non-standard prefix.  
   
 Alternatively, you may set the environment variables GLIB_CFLAGS  
 and GLIB_LIBS to avoid the need to call pkg-config.  
 See the pkg-config man page for more details." "$LINENO" 5  
 elif test $pkg_failed = untried; then  
         { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5  
 $as_echo "no" >&6; }  
         { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5  
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}  
 as_fn_error $? "The pkg-config script could not be found or is too old.  Make sure it  
 is in your PATH or set the PKG_CONFIG environment variable to the full  
 path to pkg-config.  
   
 Alternatively, you may set the environment variables GLIB_CFLAGS  
 and GLIB_LIBS to avoid the need to call pkg-config.  
 See the pkg-config man page for more details.  
   
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.  
 See \`config.log' for more details" "$LINENO" 5; }  
 else  
         GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS  
         GLIB_LIBS=$pkg_cv_GLIB_LIBS  
         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5  
 $as_echo "yes" >&6; }  
   
 fi  
         else  
   
 $as_echo "#define NO_GLIB 1" >>confdefs.h  
   
         fi  
 fi  
   
 ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket"  ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket"
 if test "x$ac_cv_func_socket" = xyes; then :  if test "x$ac_cv_func_socket" = xyes; then :
   
Line 5911  LIBOBJS=$ac_libobjs Line 5859  LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs  LTLIBOBJS=$ac_ltlibobjs
   
   
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
   $as_echo_n "checking that generated files are newer than configure... " >&6; }
      if test -n "$am_sleep_pid"; then
        # Hide warnings about reused PIDs.
        wait $am_sleep_pid 2>/dev/null
      fi
      { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
   $as_echo "done" >&6; }
  if test -n "$EXEEXT"; then   if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=    am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'    am__EXEEXT_FALSE='#'
Line 6229  if (echo >conf$$.file) 2>/dev/null; then Line 6185  if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:      # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.      # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.      # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
    # In both cases, we have to default to `cp -p'.    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||      ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
      as_ln_s='cp -p'      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then    elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln      as_ln_s=ln
   else    else
    as_ln_s='cp -p'    as_ln_s='cp -pR'
   fi    fi
 else  else
  as_ln_s='cp -p'  as_ln_s='cp -pR'
 fi  fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file  rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null  rmdir conf$$.dir 2>/dev/null
Line 6298  else Line 6254  else
   as_mkdir_p=false    as_mkdir_p=false
 fi  fi
   
 if test -x / >/dev/null 2>&1; then  
   as_test_x='test -x'  
 else  
   if ls -dL / >/dev/null 2>&1; then  
     as_ls_L_option=L  
   else  
     as_ls_L_option=  
   fi  
   as_test_x='  
     eval sh -c '\''  
       if test -d "$1"; then  
         test -d "$1/.";  
       else  
         case $1 in #(  
         -*)set "./$1";;  
         esac;  
         case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((  
         ???[sx]*):;;*)false;;esac;fi  
     '\'' sh  
   '  
 fi  
 as_executable_p=$as_test_x  
   
   # as_fn_executable_p FILE
   # -----------------------
   # Test if FILE is an executable regular file.
   as_fn_executable_p ()
   {
     test -f "$1" && test -x "$1"
   } # as_fn_executable_p
   as_test_x='test -x'
   as_executable_p=as_fn_executable_p
   
 # Sed expression to map a string onto a valid CPP name.  # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"  as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
   
Line 6340  cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 Line 6284  cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their  # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.  # values after options handling.
 ac_log="  ac_log="
This file was extended by mtr $as_me 0.85, which wasThis file was extended by mtr $as_me 0.86, which was
generated by GNU Autoconf 2.68.  Invocation command line wasgenerated by GNU Autoconf 2.69.  Invocation command line was
   
   CONFIG_FILES    = $CONFIG_FILES    CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS    CONFIG_HEADERS  = $CONFIG_HEADERS
Line 6406  _ACEOF Line 6350  _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"  ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\  ac_cs_version="\\
mtr config.status 0.85mtr config.status 0.86
configured by $0, generated by GNU Autoconf 2.68,configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"    with options \\"\$ac_cs_config\\"
   
Copyright (C) 2010 Free Software Foundation, Inc.Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation  This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."  gives unlimited permission to copy, distribute and modify it."
   
Line 6501  fi Line 6445  fi
 _ACEOF  _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then  if \$ac_cs_recheck; then
  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift    shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6    \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'    CONFIG_SHELL='$SHELL'
Line 7136  $as_echo "$as_me: executing $ac_file commands" >&6;} Line 7080  $as_echo "$as_me: executing $ac_file commands" >&6;}
   
   case $ac_file$ac_mode in    case $ac_file$ac_mode in
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {      "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
  # Autoconf 2.62 quotes --file arguments for eval, but not when files  # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval    # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.    # if we detect the quoting.
   case $CONFIG_FILES in    case $CONFIG_FILES in
Line 7149  $as_echo "$as_me: executing $ac_file commands" >&6;} Line 7093  $as_echo "$as_me: executing $ac_file commands" >&6;}
     # Strip MF so we end up with the name of the file.      # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`      mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.      # Check whether this is an Automake generated Makefile or not.
    # We used to match only the files named `Makefile.in', but    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.      # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process      # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.      # each Makefile.in and add a new line on top of each file to say so.
Line 7183  $as_echo X"$mf" | Line 7127  $as_echo X"$mf" |
       continue        continue
     fi      fi
     # Extract the definition of DEPDIR, am__include, and am__quote      # Extract the definition of DEPDIR, am__include, and am__quote
    # from the Makefile without running `make'.    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`      DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue      test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`      am__include=`sed -n 's/^am__include = //p' < "$mf"`
    test -z "am__include" && continue    test -z "$am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`      am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
     # When using ansi2knr, U may be empty or an underscore; expand it  
     U=`sed -n 's/^U = //p' < "$mf"`  
     # Find all dependency output files, they are included files with      # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the      # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the      # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.      # expansion.
     for file in `sed -n "      for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \        s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
         sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do         sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.        # Make sure the directory exists.
       test -f "$dirpart/$file" && continue        test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||        fdir=`$as_dirname -- "$file" ||
Removed from v.1.1.1.1  
changed lines
  Added in v.1.1.1.2

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>