Annotation of embedaddon/ntp/ChangeLog, revision 1.1
1.1 ! misho 1: ---
! 2: (4.2.6p5) 2011/12/24 Released by Harlan Stenn <stenn@ntp.org>
! 3: (4.2.6p5) 2011/12/24 Released by Harlan Stenn <stenn@ntp.org>
! 4:
! 5: ---
! 6: (4.2.6p5-RC3) 2011/12/08 Released by Harlan Stenn <stenn@ntp.org>
! 7:
! 8: * [Bug 2082] 3-char refid sent by ntpd 4.2.6p5-RC2 ends with extra dot.
! 9: * [Bug 2085] clock_update() sys_rootdisp calculation omits root delay.
! 10: * [Bug 2086] get_systime() should not offset by sys_residual.
! 11: * [Bug 2087] sys_jitter calculation overweights sys.peer jitter.
! 12: * Ensure NULL peer->dstadr is not accessed in orphan parent selection.
! 13:
! 14: ---
! 15: (4.2.6p5-RC2) 2011/11/30 Released by Harlan Stenn <stenn@ntp.org>
! 16:
! 17: * [Bug 2050] Orphan mode stratum counting to infinity.
! 18: * [Bug 2059] optional billboard column "server" does not honor -n.
! 19: * [Bug 2066] ntpq lopeers ipv6 "local" column overrun.
! 20: * [Bug 2068] ntpd sends nonprintable stratum 16 refid to ntpq.
! 21: * [Bug 2069] broadcastclient, multicastclient spin up duplicate
! 22: ephemeral associations without broadcastdelay.
! 23: * [Bug 2072] Orphan parent selection metric needs ntohl().
! 24: * Exclude not-yet-determined sys_refid from use in loopback TEST12
! 25: (from David Mills).
! 26: * Never send KoD rate limiting response to MODE_SERVER response.
! 27:
! 28: ---
! 29: (4.2.6p5-RC1) 2011/10/18 Released by Harlan Stenn <stenn@ntp.org>
! 30:
! 31: * [Bug 2034] Listening address configuration with prefix misapplied.
! 32:
! 33: ---
! 34: (4.2.6p4) 2011/09/22 Released by Harlan Stenn <stenn@ntp.org>
! 35:
! 36: * [Bug 1984] ntp/libisc fails to compile on OS X 10.7 (Lion).
! 37: * [Bug 1985] "logconfig =allall" rejected.
! 38: * [Bug 2001] ntpdc timerstats reports overruns as handled.
! 39: * [Bug 2003] libntpq ntpq_read_assoc_peervars() broken.
! 40: * [Backward Incompatible] sntp: -l/--filelog -> -l/--logfile, to be
! 41: consistent with ntpd.
! 42: * libopts/file.c fix from Bruce Korb (arg-type=file).
! 43:
! 44: ---
! 45: (4.2.6p4-RC2) 2011/08/04 Released by Harlan Stenn <stenn@ntp.org>
! 46:
! 47: * [Bug 1608] Parse Refclock driver should honor trusttime.
! 48: * [Bug 1961] html2man update: distribute ntp-wait.html.
! 49: * [Bug 1970] UNLINK_EXPR_SLIST() causes crash if list is empty.
! 50: * [Bug 1972] checking for struct rtattr fails.
! 51: * [Bug 1975] libntp/mktime.c won't work with 64-bit time_t
! 52: * [Bug 1978] [Bug 1134] fix in 4.2.6p4-RC1 doesn't build on older Linux.
! 53: * Backport several fixes for Coverity warnings from ntp-dev.
! 54: * Backport if_nametoindex() check for hpux.
! 55:
! 56: ---
! 57: (4.2.6p4-RC1) 2011/07/10 Released by Harlan Stenn <stenn@ntp.org>
! 58:
! 59: * [Bug 1134] ntpd fails binding to tentative IPv6 addresses.
! 60: * [Bug 1790] Update config.guess and config.sub to detect AIX6.
! 61: * [Bug 1961] html2man needs an update.
! 62: * Update the NEWS file.
! 63:
! 64: ---
! 65: (4.2.6p4-beta2) 2011/05/25 Released by Harlan Stenn <stenn@ntp.org>
! 66:
! 67: * [Bug 1695] ntpdate takes longer than necessary.
! 68: * [Bug 1832] ntpdate doesn't allow timeout > 2s.
! 69: * [Bug 1933] WWVB/Spectracom driver timestamps LFs, not CRs.
! 70: * Backport utility routines from ntp-dev: mprintf(), emalloc_zero().
! 71:
! 72: ---
! 73: (4.2.6p4-beta1) 2011/05/16 Released by Harlan Stenn <stenn@ntp.org>
! 74:
! 75: * [Bug 1554] peer may stay selected as system peer after becoming
! 76: unreachable.
! 77: * [Bug 1921] LOCAL, ACTS drivers with "prefer" excluded from initial
! 78: candidate list.
! 79: * [Bug 1923] orphan parent favored over LOCAL, ACTS drivers.
! 80: * [Bug 1924] Billboard tally codes sometimes do not match operation,
! 81: variables.
! 82: * Enable tickadj-like taming of wildly off-spec Windows clock using
! 83: NTPD_TICKADJ_PPM env. var. specifying baseline slew.
! 84: * Upgrade to AutoGen 5.11.9 (and require it).
! 85: * Upgrade to libopts 35.0.10 from AutoGen 5.11.9pre8.
! 86:
! 87: ---
! 88: (4.2.6p3) 2011/01/03 Released by Harlan Stenn <stenn@ntp.org>
! 89:
! 90: * [Bug 1764] Palisade driver doesn't build on Linux
! 91: * Create and use scripts/check--help when generating .texi files.
! 92: * Update bk triggers for the bk-5 release.
! 93: * Update genCommitLog for the bk-5 release.
! 94: * Update the copyright year.
! 95:
! 96: ---
! 97: (4.2.6p3-RC12) 2010/12/25 Released by Harlan Stenn <stenn@ntp.org>
! 98:
! 99: * [Bug 1458] Can not compile NTP on FreeBSD 4.7.
! 100: * [Bug 1510] Add modes 20/21 for driver 8 to support RAWDCF @ 75 baud.
! 101: * [Bug 1618] Unreachable code in jjy_start(). (backport from ntp-dev)
! 102: * [Bug 1719] ntp-keygen -V crash. (backport)
! 103: * [Bug 1740] ntpdc treats many counters as signed. (backport)
! 104: * [Bug 1741] Enable multicast reception on each address (Windows).
! 105: * [Bug 1742] Fix a typo in an error message in the "build" script.
! 106: * [Bug 1743] Display timezone offset when showing time for sntp in the
! 107: local timezone.
! 108: * [Bug 1751] Support for Atari FreeMiNT OS.
! 109: * [Bug 1754] --version output should be more verbose.
! 110: * [Bug 1757] oncore snprintf("%m") doesn't expand %m.
! 111: * [Bug 1758] setsockopt IPV6_MULTICAST_IF with wrong ifindex.
! 112: * [Bug 1760] ntpd Windows interpolation cannot be disabled.
! 113: * [Bug 1762] manycastclient solicitation responses interfere.
! 114: * Upgrade to libopts 34.0.9 from AutoGen 5.11.6pre7.
! 115: * Relax minimum Automake version to 1.10 with updated libopts.m4.
! 116: * Suppress ntp-keygen OpenSSL version display for --help, --version,
! 117: display both build and runtime OpenSSL versions when they differ.
! 118: * Clean up m4 quoting in configure.ac, *.m4 files, resolving
! 119: intermittent AC_LANG_PROGRAM possibly undefined errors.
! 120: * Clean up the SNTP documentation.
! 121: * Other manycastclient repairs:
! 122: Separate handling of scope ID embedded in many in6_addr from ifindex
! 123: used for IPv6 multicasting ioctls.
! 124: Add INT_PRIVACY endpt bit flag for IPv6 RFC 4941 privacy addresses.
! 125: Enable outbound multicast from only one address per interface in the
! 126: same subnet, and in that case prefer embedded MAC address modified
! 127: EUI-64 IPv6 addresses first, then static, and last RFC 4941 privacy
! 128: addresses.
! 129: Use setsockopt(IP[V6]_MULTICAST_IF) before each send to multicast to
! 130: select the local source address, using the correct socket is not
! 131: enough.
! 132:
! 133: ---
! 134: (4.2.6p3-RC11) 2010/11/28 Released by Harlan Stenn <stenn@ntp.org>
! 135:
! 136: * [Bug 1725] ntpd sends multicast from only one address.
! 137: * [Bug 1728] In ntp_openssl.m4, don't add -I/usr/include or -L/usr/lib
! 138: to CPPFLAGS or LDFLAGS.
! 139: * [Bug 1733] IRIX doesn't have 'head' (affects scripts/checkChangeLog).
! 140: * Remove log_msg() and debug_msg() from sntp in favor of msyslog().
! 141: * Use a single copy of libopts/, in sntp/.
! 142: * Upgrade libopts to 33.3.8.
! 143: * Bump minimum Automake version to 1.11, required for AM_COND_IF
! 144: use in LIBOPTS_CHECK.
! 145: * Improvements to the 'build' script.
! 146:
! 147: ---
! 148: (4.2.6p3-RC10) 2010/11/14 Released by Harlan Stenn <stenn@ntp.org>
! 149:
! 150: * [Bug 1681] More sntp logging cleanup.
! 151: * [Bug 1683] Non-localhost on loopback exempted from nic rules.
! 152:
! 153: ---
! 154: (4.2.6p3-RC9) 2010/11/10 Released by Harlan Stenn <stenn@ntp.org>
! 155:
! 156: * [Bug 1574] sntp:set_time doesn't set tv_usec correctly.
! 157: * [Bug 1681] sntp logging cleanup.
! 158: * [Bug 1683] Interface binding does not seem to work as intended.
! 159: * [Bug 1691] Use first NMEA sentence each second.
! 160: * [Bug 1692] packageinfo.sh needs to be "sourced" using ./ .
! 161: * [Bug 1709] ntpdate ignores replies with equal receive and transmit
! 162: timestamps.
! 163: * Backport sntp from -dev
! 164:
! 165: ---
! 166: (4.2.6p3-RC8) 2010/10/29 Released by Harlan Stenn <stenn@ntp.org>
! 167:
! 168: * [Bug 1685] NMEA driver mode byte confusion.
! 169: * First cut at using scripts/checkChangeLog.
! 170:
! 171: ---
! 172: (4.2.6p3-RC7) 2010/10/25 Released by Harlan Stenn <stenn@ntp.org>
! 173:
! 174: * [Bug 1676] NMEA: $GPGLL did not work after fix for Bug 1571.
! 175: * Added scripts/checkChangeLog.
! 176:
! 177: ---
! 178: (4.2.6p3-RC6) 2010/10/24 Released by Harlan Stenn <stenn@ntp.org>
! 179:
! 180: * [Bug 1571] NMEA does not relate data to PPS edge.
! 181: * [Bug 1572] NMEA time adjustment for GPZDG buggy.
! 182: * [Bug 1675] Prohibit includefile remote config.
! 183:
! 184: ---
! 185: (4.2.6p3-RC5) 2010/10/22 Released by Harlan Stenn <stenn@ntp.org>
! 186:
! 187: * [Bug 1649] Require NMEA checksum if $GPRMC or previously seen.
! 188: * [Bug 1669] NTP 4.2.6p2 fails to compile on IBM AIX 5.3.
! 189:
! 190: ---
! 191: (4.2.6p3-RC4) 2010/10/16 Released by Harlan Stenn <stenn@ntp.org>
! 192:
! 193: * [Bug 1584] wrong SNMP type for precision, resolution.
! 194: * [Bug 1659] Need CLOCK_TRUETIME not CLOCK_TRUE.
! 195: * [Bug 1665] is_anycast() u_int32_t should be u_int32.
! 196: * ntpsnmpd, libntpq warning cleanup.
! 197:
! 198: ---
! 199: (4.2.6p3-RC3) 2010/10/14 Released by Harlan Stenn <stenn@ntp.org>
! 200:
! 201: * [Bug 750] Non-existing device causes coredump with RIPE-NCC driver.
! 202: * [Bug 1080] ntpd on ipv6 routers very chatty.
! 203: * [Bug 1567] Support Arbiter 1093C Satellite Clock on Windows.
! 204: * [Bug 1581] printf format string mismatch leftover.
! 205: * [Bug 1584] ntpsnmpd OID must be mib-2.197.
! 206: * [Bug 1643] Range-check the decoding of the RIPE-NCC status codes.
! 207: * [Bug 1644] cvo.sh should use lsb_release to identify linux distros.
! 208: * [Bug 1659] Support Truetime Satellite Clocks on Windows.
! 209: * [Bug 1660] On some systems, test is in /usr/bin, not /bin.
! 210: * [Bug 1661] Re-indent refclock_ripencc.c.
! 211:
! 212: ---
! 213: (4.2.6p3-RC2) 2010/09/25 Released by Harlan Stenn <stenn@ntp.org>
! 214:
! 215: * [Bug 1635] "filegen ... enable" is not default.
! 216: * [Bug 1636] yyparse() segfault after denied filegen remote config.
! 217:
! 218: ---
! 219: (4.2.6p3-RC1) 2010/09/18 Released by Harlan Stenn <stenn@ntp.org>
! 220:
! 221: * [Bug 1344] ntpd on Windows exits without logging cause.
! 222:
! 223: ---
! 224: (4.2.6p3-beta1) 2010/09/11 Released by Harlan Stenn <stenn@ntp.org>
! 225:
! 226: * [Bug 1573] Miscalculation of offset in sntp.
! 227: * [Bug 1595] empty last line in key file causes duplicate key to be added
! 228: * [Bug 1597] packet processing ignores RATE KoD packets, because of
! 229: a bug in string comparison.
! 230: * [Bug 1581] ntp_intres.c size_t printf format string mismatch.
! 231:
! 232: ---
! 233: (4.2.6p2) 2010/07/09 Released by Harlan Stenn <stenn@ntp.org>
! 234:
! 235: * [Bug 1581] size_t printf format string mismatches, IRIG string buffers
! 236: undersized. Mostly backported from earlier ntp-dev fixes by Juergen
! 237: Perlinger.
! 238:
! 239: ---
! 240: (4.2.6p2-RC7) 2010/06/19 Released by Harlan Stenn <stenn@ntp.org>
! 241:
! 242: * [Bug 1570] serial clock drivers get outdated input from kernel tty
! 243: line buffer after startup
! 244: * [Bug 1575] use 'snprintf' with LIB_BUFLENGTH in inttoa.c, tvtoa.c and
! 245: utvtoa.c
! 246: * [Bug 1576] sys/sysctl.h depends on sys/param.h on OpenBSD.
! 247:
! 248: ---
! 249: (4.2.6p2-RC6) 2010/06/12 Released by Harlan Stenn <stenn@ntp.org>
! 250:
! 251: * [Bug 715] libisc Linux IPv6 interface iteration drops multicast flags.
! 252:
! 253: ---
! 254: (4.2.6p2-RC5) 2010/06/03 Released by Harlan Stenn <stenn@ntp.org>
! 255:
! 256: * [Bug 1561] ntpq, ntpdc "passwd" prompts for MD5 password w/SHA1.
! 257: * [Bug 1565] sntp/crypto.c compile fails on MacOS over vsnprintf().
! 258: * Windows port: do not exit in ntp_timestamp_from_counter() without
! 259: first logging the reason.
! 260: * Support "passwd blah" syntax in ntpq.
! 261:
! 262: ---
! 263: (4.2.6p2-RC4) 2010/05/19 Released by Harlan Stenn <stenn@ntp.org>
! 264:
! 265: * [Bug 1555] 4.2.6p2-RC3 sntp illegal C (mixed code and declarations).
! 266:
! 267: ---
! 268: (4.2.6p2-RC3) 2010/05/11 Released by Harlan Stenn <stenn@ntp.org>
! 269:
! 270: * [Bug 1325] unreachable code in sntp recv_bcst_data().
! 271: * [Bug 1459] sntp MD5 authentication does not work with ntpd.
! 272: * [Bug 1512] ntpsnmpd should connect to net-snmpd via a unix-domain
! 273: socket by default. Provide a command-line 'socket name' option.
! 274: * [Bug 1538] update refclock_nmea.c's call to getprotobyname().
! 275: * [Bug 1541] Fix wrong keyword for "maxclock".
! 276: * [Bug 1552] update and complete broadcast and crypto features in sntp.
! 277: * [Bug 1553] sntp/configure.ac OpenSSL support.
! 278: * Escape unprintable characters in a refid in ntpq -p billboard.
! 279: * Simplify hash client code by providing OpenSSL EVP_*() API when built
! 280: without OpenSSL. (from ntp-dev)
! 281: * Do not depend on ASCII values for ('A' - '0'), ('a' - '0') in sntp.
! 282: * Windows compiling hints/winnt.html update from G. Sunil Tej.
! 283:
! 284: ---
! 285: (4.2.6p2-RC2) 2010/04/27 Released by Harlan Stenn <stenn@ntp.org>
! 286:
! 287: * [Bug 1465] Make sure time from TS2100 is not invalid (backport from
! 288: ntp-dev).
! 289: * [Bug 1528] Fix EDITLINE_LIBS link order for ntpq and ntpdc.
! 290: * [Bug 1534] win32/include/isc/net.h conflicts with VC++ 2010 errno.h.
! 291: * [Bug 1535] "restrict -4 default" and "restrict -6 default" ignored.
! 292: * Remove --with-arlib from br-flock.
! 293:
! 294: ---
! 295: (4.2.6p2-RC1) 2010/04/18 Released by Harlan Stenn <stenn@ntp.org>
! 296:
! 297: * [Bug 1503] Auto-enabling of monitor for "restrict ... limited" wrong.
! 298: * [Bug 1504] ntpdate tickles ntpd "discard minimum 1" rate limit if
! 299: "restrict ... limited" is used.
! 300: * [Bug 1518] Windows ntpd should lock to one processor more
! 301: conservatively.
! 302: * [Bug 1522] Enable range syntax "trustedkey (301 ... 399)".
! 303: * Update html/authopt.html controlkey, requestkey, and trustedkey docs.
! 304:
! 305: ---
! 306: (4.2.6p1) 2010/04/09 Released by Harlan Stenn <stenn@ntp.org>
! 307: (4.2.6p1-RC6) 2010/03/31 Released by Harlan Stenn <stenn@ntp.org>
! 308:
! 309: * [Bug 1514] Typo in ntp_proto.c: fabs(foo < .4) should be fabs(foo) < .4.
! 310: * [Bug 1464] synchronization source wrong for refclocks ARCRON_MSF (27)
! 311: and SHM (28).
! 312: * Correct Windows port's refclock_open() to return 0 on failure not -1.
! 313: * Correct CHU, dumbclock, and WWVB drivers to check for 0 returned from
! 314: refclock_open() on failure.
! 315: * Correct "SIMUL=4 ./flock-build -1" to prioritize -1/--one.
! 316:
! 317: ---
! 318: (4.2.6p1-RC5) 2010/02/09 Released by Harlan Stenn <stenn@ntp.org>
! 319:
! 320: * [Bug 1140] Clean up debug.html, decode.html, and ntpq.html.
! 321: * [Bug 1438] Remove dead code from sntp/networking.c.
! 322: * [Bug 1477] 1st non-gmake make in clone w/VPATH can't make COPYRIGHT.
! 323: * [Bug 1478] linking fails with undefined reference EVP_MD_pkey_type.
! 324: * [Bug 1479] Compilation fails because of not finding readline headers.
! 325: * [Bug 1480] snprintf() cleanup caused unterminated refclock IDs.
! 326: * [Bug 1484] ushort is not defined in QNX6.
! 327:
! 328: ---
! 329: (4.2.6p1-RC4) 2010/02/04 Released by Harlan Stenn <stenn@ntp.org>
! 330:
! 331: * [Bug 1455] ntpd does not try /etc/ntp.audio as documented.
! 332: * [Bug 1467] Fix bogus rebuild of sntp/sntp.html
! 333: * [Bug 1470] "make distdir" in $srcdir builds keyword-gen, libntp.a.
! 334: * [Bug 1473] "make distcheck" before build can't make sntp/version.m4.
! 335: * [Bug 1474] ntp_keygen needs LCRYPTO after libntp.a.
! 336: * Convert many sprintf() calls to snprintf(), also strcpy(), strcat().
! 337: * Fix widely cut-n-pasted bug in refclock shutdown after failed start.
! 338: * Remove some dead code checking for emalloc() returning NULL.
! 339: * Remove arlib.
! 340:
! 341: ---
! 342: (4.2.6p1-RC3) 2010/01/24 Released by Harlan Stenn <stenn@ntp.org>
! 343:
! 344: * Use TZ=UTC instead of TZ= when calling date in scripts/mkver.in .
! 345: * [Bug 1448] Some macros not correctly conditionally or absolutely defined
! 346: on Windows.
! 347: * [Bug 1449] ntpsim.h in ntp_config.c should be used conditionally.
! 348: * [Bug 1450] Option to exclude warnings not unconditionally defined on Windows.
! 349: * [Bug 1127] Properly check the return of X590_verify() - missed one.
! 350: * [Bug 1439] .texi generation must wait until after binary is linked.
! 351: * [Bug 1440] Update configure.ac to support kfreebsd.
! 352: * [Bug 1445] IRIX does not have -lcap or support linux capabilities.
! 353: * [Bug 1451] CID 115: sntp leaks KoD entry when updating existing.
! 354: * [Bug 1453] Use $CC in config.cache filename in ./build script.
! 355:
! 356: ---
! 357: (4.2.6p1-RC2) 2009/12/25 Released by Harlan Stenn <stenn@ntp.org>
! 358:
! 359: * [Bug 1411] Fix status messages in refclock_oncore.c.
! 360: * [Bug 1416] MAXDNAME undefined on Solaris 2.6.
! 361: * [Bug 1419] ntpdate, ntpdc, sntp, ntpd ignore configure --bindir.
! 362: * [Bug 1424] Fix check for rtattr (rtnetlink.h).
! 363: * [Bug 1425] unpeer by association ID sets up for duplicate free().
! 364: * [Bug 1426] scripts/VersionName needs . on the search path.
! 365: * [Bug 1427] quote missing in ./build - shows up on NetBSD.
! 366: * [Bug 1428] Use AC_HEADER_RESOLV to fix breaks from resolv.h
! 367: * [Bug 1429] ntpd -4 option does not reliably force IPv4 resolution.
! 368: * [Bug 1431] System headers must come before ntp headers in ntp_intres.c .
! 369: * [Bug 1434] HP-UX 11 ip_mreq undeclared, _HPUX_SOURCE helps some.
! 370: * [Bug 1435] sntp: Test for -lresolv using the same tests as in ntp.
! 371:
! 372: ---
! 373: (4.2.6p1-RC1) 2009/12/20 Released by Harlan Stenn <stenn@ntp.org>
! 374:
! 375: * [Bug 1409] Put refclock_neoclock4x.c under the NTP COPYRIGHT notice.
! 376: This should allow debian and other distros to add this refclock driver
! 377: in further distro releases.
! 378: Detect R2 hardware releases.
! 379: * [Bug 1412] m4/os_cflags.m4 caches results that depend on $CC.
! 380: * [Bug 1413] test OpenSSL headers regarding -Wno-strict-prototypes.
! 381: * [Bug 1414] Enable "make distcheck" success with BSD make.
! 382: * [Bug 1415] Fix Mac OS X link problem.
! 383: * [Bug 1418] building ntpd/ntpdc/ntpq statically with ssl fails.
! 384: * Build infrastructure updates to enable beta releases of ntp-stable.
! 385:
! 386: ---
! 387: (4.2.6) 2009/12/09 Released by Harlan Stenn <stenn@ntp.org>
! 388: * Include (4.2.4p8) - [Sec 1331] DoS with mode 7 packets - CVE-2009-3563.
! 389: * [Bug 508] Fixed leap second handling for Windows.
! 390: (4.2.5p250-RC) 2009/11/30 Released by Harlan Stenn <stenn@ntp.org>
! 391: * sntp documentation updates.
! 392: * [Bug 761] internal resolver does not seem to honor -4/-6 qualifiers
! 393: * [Bug 1386] Deferred DNS doesn't work on NetBSD
! 394: * [Bug 1391] avoid invoking autogen twice for .c and .h files.
! 395: * [Bug 1397] shmget() refclock_shm failing because of file mode.
! 396: * Pass no_needed to ntp_intres as first part of fixing [Bug 975].
! 397: * Add ./configure --enable-force-defer-DNS to help debugging.
! 398: (4.2.5p249-RC) 2009/11/28 Released by Harlan Stenn <stenn@ntp.org>
! 399: * [Bug 1400] An empty KOD DB file causes sntp to coredump.
! 400: * sntp: documentation cleanup.
! 401: * sntp: clean up some error messages.
! 402: * sntp: Use the precision to control how many offset digits are shown.
! 403: * sntp: Show root dispersion.
! 404: * Cleanup from the automake/autoconf upgrades.
! 405: (4.2.5p248-RC) 2009/11/26 Released by Harlan Stenn <stenn@ntp.org>
! 406: * Prepare for the generation of sntp.html.
! 407: * Documentation changes from Dave Mills.
! 408: * [Bug 1387] Storage leak in ntp_intres (minor).
! 409: * [Bug 1389] buffer overflow in refclock_oncore.c
! 410: * [Bug 1391] .texi usage text from installed, not built binaries.
! 411: * [Bug 1392] intres retries duplicate assocations endlessly.
! 412: * Correct *-opts.h dependency so default 'get' action isn't used.
! 413: (4.2.5p247-RC) 2009/11/20 Released by Harlan Stenn <stenn@ntp.org>
! 414: * [Bug 1142] nodebug builds shed no light on -d, -D option failure.
! 415: * [Bug 1179] point out the problem with -i/--jaildir and -u/--user when
! 416: they are disabled by configure.
! 417: * [Bug 1308] support systems that lack fork().
! 418: * [Bug 1343] sntp doesn't link on Solaris 7, needs -lresolv.
! 419: (4.2.5p246-RC) 2009/11/17 Released by Harlan Stenn <stenn@ntp.org>
! 420: * Upgrade to autogen-5.10
! 421: * [Bug 1378] Unnecessary resetting of peers during interface update.
! 422: * [Bug 1382] p245 configure --disable-dependency-tracking won't build.
! 423: * [Bug 1384] ntpq :config core dumped with a blank password.
! 424: (4.2.5p245-RC) 2009/11/14 Released by Harlan Stenn <stenn@ntp.org>
! 425: * Cleanup from Dave Mills.
! 426: * [Bug 1343] sntp illegal C does not compile on Solaris 7.
! 427: * [Bug 1381] Version .deps generated include file dependencies to allow
! 428: known dependency-breaking changes to force .deps to be cleaned,
! 429: triggered by changing the contents of deps-ver and/or sntp/deps-ver.
! 430: (4.2.5p244-RC) 2009/11/12 Released by Harlan Stenn <stenn@ntp.org>
! 431: * keygen.html updates from Dave Mills.
! 432: * [Bug 1003] ntpdc unconfig command doesn't prompt for keyid.
! 433: * [Bug 1376] Enable authenticated ntpq and ntpdc using newly-available
! 434: digest types.
! 435: * ntp-keygen, Autokey OpenSSL build vs. run version mismatch is now a
! 436: non-fatal warning.
! 437: (4.2.5p243-RC) 2009/11/11 Released by Harlan Stenn <stenn@ntp.org>
! 438: * [Bug 1226] Fix deferred DNS lookups.
! 439: * new crypto signature cleanup.
! 440: (4.2.5p242-RC) 2009/11/10 Released by Harlan Stenn <stenn@ntp.org>
! 441: * [Bug 1363] CID 92 clarify fallthrough case in clk_trimtsip.c
! 442: * [Bug 1366] ioctl(TIOCSCTTY, 0) fails on NetBSD *[0-2].* > 3.99.7.
! 443: * [Bug 1368] typos in libntp --without-crypto case
! 444: * [Bug 1371] deferred DNS lookup failing with INFO_ERR_AUTH.
! 445: * CID 87 dead code in ntpq.c atoascii().
! 446: * Fix authenticated ntpdc, broken in p240.
! 447: * Stub out isc/mem.h, shaving 47k from a MIPS ntpd binary.
! 448: * Shrink keyword scanner FSM entries from 64 to 32 bits apiece.
! 449: * Documention updates from Dave Mills.
! 450: * authkeys.c cleanup from Dave Mills.
! 451: (4.2.5p241-RC) 2009/11/07 Released by Harlan Stenn <stenn@ntp.org>
! 452: * html/authopt.html update from Dave Mills.
! 453: * Remove unused file from sntp/Makefile.am's distribution list.
! 454: * new crypto signature cleanup.
! 455: (4.2.5p240-RC) 2009/11/05 Released by Harlan Stenn <stenn@ntp.org>
! 456: * [Bug 1364] clock_gettime() not detected, need -lrt on Debian 5.0.3.
! 457: * Provide all of OpenSSL's signature methods for ntp.keys (FIPS 140-2).
! 458: (4.2.5p239-RC) 2009/10/30 Released by Harlan Stenn <stenn@ntp.org>
! 459: * [Bug 1357] bogus assert from refclock_shm.
! 460: * [Bug 1359] Debug message cleanup.
! 461: * CID 101: more pointer/array cleanup.
! 462: * [Bug 1356] core dump from refclock_nmea when can't open /dev/gpsU.
! 463: * [Bug 1358] AIX 4.3 sntp/networking.c IPV6_JOIN_GROUP undeclared.
! 464: * CID 101: pointer/array cleanup.
! 465: (4.2.5p238-RC) 2009/10/27 Released by Harlan Stenn <stenn@ntp.org>
! 466: * Changes from Dave Mills.
! 467: * driver4.html updates from Dave Mills.
! 468: * [Bug 1252] PPSAPI cleanup on ntpd/refclock_wwvb.c.
! 469: * [Bug 1354] libtool error building after bootstrap with Autoconf 2.64.
! 470: * Allow NTP_VPATH_HACK configure test to handle newer gmake versions.
! 471: * CIDs 94-99 make it more clearly impossible for sock_hash() to return
! 472: a negative number.
! 473: * CID 105, 106 ensure ntpdc arrays are not overrun even if callers
! 474: misbehave.
! 475: * CID 113 use va_end() in refclock_true.c true_debug().
! 476: * Get rid of configure tests for __ss_family and __ss_len when the more
! 477: common ss_family and ss_len are present.
! 478: (4.2.5p237-RC) 2009/10/26 Released by Harlan Stenn <stenn@ntp.org>
! 479: * [Bug 610] NMEA support for using PPSAPI on a different device.
! 480: * [Bug 1238] use only fudge time2 to offset NMEA serial timestamp.
! 481: * [Bug 1355] ntp-dev won't compile on OpenBSD 4.6.
! 482: (4.2.5p236-RC) 2009/10/22 Released by Harlan Stenn <stenn@ntp.org>
! 483: * Cleanup from Dave Mills.
! 484: * [Bug 1343] ntpd/ntp_io.c close_fd() does not compile on Solaris 7.
! 485: * [Bug 1353] ntpq "rv 0 settimeofday" always shows UNKNOWN on unix.
! 486: * Do not attempt to execute built binaries from ntpd/Makefile when
! 487: cross-compiling (keyword-gen and ntpd --saveconfigquit).
! 488: * sntp/main.c: Remove duplicate global adr_buf[] (also defined in
! 489: networking.c) which Piotr Grudzinski identified breaking his build.
! 490: * Correct in6addr_any test in configure.ac to attempt link too.
! 491: (4.2.5p235-RC) 2009/10/18 Released by Harlan Stenn <stenn@ntp.org>
! 492: * [Bug 1343] lib/isc build breaks on systems without IPv6 headers.
! 493: (4.2.5p234-RC) 2009/10/16 Released by Harlan Stenn <stenn@ntp.org>
! 494: * [Bug 1339] redux, use unmodified lib/isc/win32/strerror.c and
! 495: move #define strerror... to a header not used by lib/isc code.
! 496: * [Bug 1345] illegal 'grep' option prevents compilation.
! 497: * [Bug 1346] keyword scanner broken where char defaults to unsigned.
! 498: * [Bug 1347] ntpd/complete.conf missing multicastclient test case.
! 499: (4.2.5p233-RC) 2009/10/15 Released by Harlan Stenn <stenn@ntp.org>
! 500: * [Bug 1337] cast setsockopt() v4 address pointer to void *.
! 501: * [Bug 1342] ignore|drop one IPv6 address on an interface blocks all
! 502: addresses on that interface.
! 503: * Documentation cleanup and updates.
! 504: (4.2.5p232-RC) 2009/10/14 Released by Harlan Stenn <stenn@ntp.org>
! 505: * [Bug 1302] OpenSSL under Windows needs applink support.
! 506: * [Bug 1337] fix incorrect args to setsockopt(fd, IP_MULTICAST_IF,...).
! 507: * [Bug 1339] Fix Windows-only ntp_strerror() infinite recursion.
! 508: * [Bug 1341] NMEA driver requires working PPSAPI #ifdef HAVE_PPSAPI.
! 509: * Construct ntpd keyword scanner finite state machine at compile time
! 510: rather than at runtime, shrink entries from 40+ to 8 bytes.
! 511: * Update documentation for ntpq --old-rv, saveconfig, saveconfigdir,
! 512: ntpd -I -L and -M, and interface/nic rules. (From Dave Hart)
! 513: * [Bug 1337] fix incorrect args to setsockopt(fd, IP_MULTICAST_IF,...)
! 514: (4.2.5p231-RC) 2009/10/10 Released by Harlan Stenn <stenn@ntp.org>
! 515: * [Bug 1335] Broadcast client degraded by wildcard default change.
! 516: (4.2.5p230-RC) 2009/10/09 Released by Harlan Stenn <stenn@ntp.org>
! 517: * Start the 4.2.6 Release Candidate cycle.
! 518: * Broadcast and transit phase cleanup from Dave Mills.
! 519: (4.2.5p229) 2009/10/07 Released by Harlan Stenn <stenn@ntp.org>
! 520: * [Bug 1334] ntpsnmpd undefined reference to `ntpqOptions'.
! 521: * Change ntpsnmpd/Makefile.am include file order to fix FreeBSD build.
! 522: (4.2.5p228) 2009/10/06 Released by Harlan Stenn <stenn@ntp.org>
! 523: * Reclaim syntax tree memory after application in ntpd built with
! 524: configure --disable-saveconfig.
! 525: * [Bug 1135] ntpq uses sizeof(u_long) where sizeof(u_int32) is meant.
! 526: * [Bug 1333] ntpd --interface precedence over --novirtualips lost.
! 527: (4.2.5p227) 2009/10/05 Released by Harlan Stenn <stenn@ntp.org>
! 528: * [Bug 1135] :config fails with "Server disallowed request"
! 529: * [Bug 1330] disallow interface/nic rules when --novirtualips or
! 530: --interface are used.
! 531: * [Bug 1332] ntpq -c 'rv 0 variablename' returns extra stuff.
! 532: * Add test of ntpd --saveconfigquit fidelity using new complete.conf.
! 533: * Documentation updates from Dave Hart/Dave Mills.
! 534: (4.2.5p226) 2009/10/04 Released by Harlan Stenn <stenn@ntp.org>
! 535: * [Bug 1318] Allow multiple -g options on ntpd command line.
! 536: * [Bug 1327] ntpq, ntpdc, ntp-keygen -d & -D should work with configure
! 537: --disable-debugging.
! 538: * Add ntpd --saveconfigquit <filename> option for future build-time
! 539: testing of saveconfig fidelity.
! 540: * Clockhop and autokey cleanup from Dave Mills.
! 541: * Documentation updates from Dave Mills.
! 542: (4.2.5p225) 2009/09/30 Released by Harlan Stenn <stenn@ntp.org>
! 543: * authopt documentation changes from Dave Mills/Dave Hart.
! 544: * [Bug 1324] support bracketed IPv6 numeric addresses for restrict.
! 545: (4.2.5p224) 2009/09/29 Released by Harlan Stenn <stenn@ntp.org>
! 546: * Clockhop and documentation fixes from Dave Mills.
! 547: * Remove "tos maxhop" ntp.conf knob.
! 548: (4.2.5p223) 2009/09/28 Released by Harlan Stenn <stenn@ntp.org>
! 549: * [Bug 1321] build doesn't work if . isn't on $PATH.
! 550: * [Bug 1323] Implement "revoke #" to match documentation, deprecate
! 551: "crypto revoke #".
! 552: (4.2.5p222) 2009/09/27 Released by Harlan Stenn <stenn@ntp.org>
! 553: * Update libisc code using bind-9.6.1-P1.tar.gz, rearrange our copy to
! 554: mirror the upstream layout (lib/isc/...), and merge in NTP-local
! 555: modifications to libisc. There is a new procedure to ease future
! 556: libisc merges using a separate "upstream" bk repo. That will enable
! 557: normal bk pull automerge to handle carrying forward any local changes
! 558: and should enable us to take updated libisc snapshots more often.
! 559: * Updated build and flock-build scripts. flock-build --one is a way
! 560: to perform a flock-build compatible solitary build, handy for a repo
! 561: clone's first build on a machine with autoconf, automake, etc.
! 562: * Compiling ntp_parser.y using BSD make correctly places ntp_parser.h
! 563: in the top-level ntpd directory instead of A.*/ntpd.
! 564: * bootstrap script updated to remove potentially stale .deps dirs.
! 565: * Remove unneeded Makefile.am files from the lib/isc/include tree.
! 566: (4.2.5p221) 2009/09/26 Released by Harlan Stenn <stenn@ntp.org>
! 567: * [Bug 1316] segfault if refclock_nmea can't open file.
! 568: * [Bug 1317] Distribute cvo.sh.
! 569: (4.2.5p220) 2009/09/25 Released by Harlan Stenn <stenn@ntp.org>
! 570: * Rearrange libisc code to match the upstream layout in BIND. This is
! 571: step one of two, changing the layout but keeping our existing libisc.
! 572: (4.2.5p219) 2009/09/24 Released by Harlan Stenn <stenn@ntp.org>
! 573: * [Bug 1315] "interface ignore 0.0.0.0" is ignored.
! 574: * add implicit "nic ignore all" rule before any rules from ntp.conf, so
! 575: "nic listen eth0" alone means the same as "-I eth0".
! 576: * add wildcard match class for interface/nic rules.
! 577: * fix mistaken carryover of prefixlen from one rule to the next.
! 578: * Ensure IPv6 localhost address ::1 is included in libisc's Windows IPv6
! 579: address enumeration, allowing ntpq and ntpdc's hardcoding to 127.0.0.1
! 580: on Windows to end.
! 581: (4.2.5p218) 2009/09/21 Released by Harlan Stenn <stenn@ntp.org>
! 582: * [Bug 1314] saveconfig emits -4 and -6 on when not given.
! 583: * correct parsing and processing of setvar directive.
! 584: * highlight location of ntpq :config syntax errors with ^.
! 585: * clarify (former) NO_ARG, SINGLE_ARG, MULTIPLE_ARG renaming to
! 586: FOLLBY_TOKEN, FOLLBY_STRING, FOLLBY_STRINGS_TO_EOC.
! 587: * parser, saveconfig cleanup to store T_ identifiers in syntax tree.
! 588: (4.2.5p217) 2009/09/20 Released by Harlan Stenn <stenn@ntp.org>
! 589: * [Bug 1300] reject remote configuration of dangerous items.
! 590: (4.2.5p216) 2009/09/19 Released by Harlan Stenn <stenn@ntp.org>
! 591: * [Bug 1312] ntpq/ntpdc MD5 passwords truncated to 8 chars on Suns.
! 592: * CID 10 missing free(up); in refclock_palisade.c error return, again.
! 593: * CID 83 added assertion to demonstrate config_nic_rules() does not
! 594: call strchr(NULL, '/').
! 595: (4.2.5p215) 2009/09/18 Released by Harlan Stenn <stenn@ntp.org>
! 596: * [Bug 1292] Workaround last VC6 unsigned __int64 kink.
! 597: (4.2.5p214) 2009/09/17 Released by Harlan Stenn <stenn@ntp.org>
! 598: * [Bug 1303] remove top-level "autokey" directive.
! 599: * use "nic listen 192.168.0.0/16" instead of
! 600: "nic listen 192.168.0.0 prefixlen 16".
! 601: (4.2.5p213) 2009/09/16 Released by Harlan Stenn <stenn@ntp.org>
! 602: * [Bug 1310] fix Thunderbolt mode in refclock_palisade.c
! 603: (4.2.5p212) 2009/09/15 Released by Harlan Stenn <stenn@ntp.org>
! 604: * [Bug 983] add interface [listen | ignore | drop] ... directive.
! 605: * [Bug 1243] MD5auth_setkey zero-fills key from first zero octet.
! 606: * [Bug 1295] leftover fix, do not crash on exit in free_config_trap()
! 607: when "trap 1.2.3.4" is used without any further options.
! 608: * [Bug 1311] 4.2.5p211 doesn't build in no-debug mode.
! 609: * document interface (alias nic) and unpeer.
! 610: * Correct syntax error line & column numbers.
! 611: * CID 79: kod_init_kod_db() fails to fclose(db_s) in two error paths.
! 612: * CID 80: attempt to quiet Coverity false positive re: leaking "reason"
! 613: in main().
! 614: * Documentation updates from Dave Mills.
! 615: * CID 81: savedconfig leaked in save_config().
! 616: * Make the code agree with the spec and the book (Dave Mills).
! 617: (4.2.5p211) 2009/09/14 Released by Harlan Stenn <stenn@ntp.org>
! 618: * [Bug 663] respect ntpq -c and -p order on command line.
! 619: * [Bug 1292] more VC6 unsigned __int64 workarounds.
! 620: * [Bug 1296] Added Support for Trimble Acutime Gold.
! 621: (4.2.5p210) 2009/09/06 Released by Harlan Stenn <stenn@ntp.org>
! 622: * [Bug 1294] Use OPENSSL_INC and OPENSSL_LIB macros for Windows
! 623: and remove unnecessary reference to applink.c for Windows
! 624: * [Bug 1295] trap directive options are not optional.
! 625: * [Bug 1297] yylex() must always set yylval before returning.
! 626: (4.2.5p209) 2009/09/01 Released by Harlan Stenn <stenn@ntp.org>
! 627: * [Bug 1290] Fix to use GETTIMEOFDAY macro
! 628: * [Bug 1289] Update project files for VC6, VS2003, VS2005, VS 2008
! 629: (4.2.5p208) 2009/08/30 Released by Harlan Stenn <stenn@ntp.org>
! 630: * [Bug 1293] make configuration dumper ready for release, specifically:
! 631: * rename ntpq dumpcfg command to "saveconfig".
! 632: * require authentication for saveconfig.
! 633: * "restrict ... nomodify" prevents saveconfig and :config.
! 634: * "saveconfig ." shorthand to save to startup configuration file.
! 635: * support strftime() substitution in saveconfig arg to timestamp
! 636: the output filename, for example "saveconfig %Y%m%d-%H%M%S.conf".
! 637: * display saveconfig response message from ntpd in ntpq.
! 638: * save output filename in "savedconfig" variable, fetched with ntpq -c
! 639: "rv 0 savedconfig".
! 640: * document saveconfig in html/ntpq.html.
! 641: * add ./configure --disable-saveconfig to build a smaller ntpd.
! 642: * log saveconfig failures and successes to syslog.
! 643: (4.2.5p207) 2009/08/29 Released by Harlan Stenn <stenn@ntp.org>
! 644: * [Bug 1292] Minor Windows source tweaks for VC6-era SDK headers.
! 645: (4.2.5p206) 2009/08/26 Released by Harlan Stenn <stenn@ntp.org>
! 646: * accopt.html typo fixes from Dave Mills.
! 647: * [Bug 1283] default to remembering KoD in sntp.
! 648: * clean up numerous sntp/kod_management.c bugs.
! 649: * use all addresses resolved from each DNS name in sntp.
! 650: (4.2.5p205) 2009/08/18 Released by Harlan Stenn <stenn@ntp.org>
! 651: * accopt.html typo fixes from Dave Mills.
! 652: * [Bug 1285] Log ntpq :config/config-from-file events.
! 653: * [Bug 1286] dumpcfg omits statsdir, mangles filegen.
! 654: (4.2.5p204) 2009/08/17 Released by Harlan Stenn <stenn@ntp.org>
! 655: * [Bug 1284] infinite loop in ntpd dumping more than one trustedkey
! 656: (4.2.5p203) 2009/08/16 Released by Harlan Stenn <stenn@ntp.org>
! 657: * Add ntpq -c dumpcfg, Google Summer of Code project of Max Kuehn
! 658: (4.2.5p202) 2009/08/14 Released by Harlan Stenn <stenn@ntp.org>
! 659: * install the binary and man page for sntp.
! 660: (4.2.5p201) 2009/08/13 Released by Harlan Stenn <stenn@ntp.org>
! 661: * sntp: out with the old, in with the new.
! 662: (4.2.5p200) 2009/08/12 Released by Harlan Stenn <stenn@ntp.org>
! 663: * [Bug 1281] Build ntpd on Windows without big SDK download, burn,
! 664: and install by checking in essentially unchanging messages.mc build
! 665: products to avoid requiring mc.exe, which is not included with VC++
! 666: 2008 EE.
! 667: (4.2.5p199) 2009/08/09 Released by Harlan Stenn <stenn@ntp.org>
! 668: * [Bug 1279] Cleanup for warnings from Veracode static analysis.
! 669: (4.2.5p198) 2009/08/03 Released by Harlan Stenn <stenn@ntp.org>
! 670: * Upgrade to autogen-5.9.9-pre5.
! 671: (4.2.5p197) 2009/07/30 Released by Harlan Stenn <stenn@ntp.org>
! 672: * The build script now has . at the end of PATH for config.guess.
! 673: (4.2.5p196) 2009/07/29 Released by Harlan Stenn <stenn@ntp.org>
! 674: * [Bug 1272] gsoc_sntp IPv6 build problems under HP-UX 10.
! 675: * [Bug 1273] CID 10: Palisade leaks unit struct in error path.
! 676: * [Bug 1274] CID 67: ensure resolve_hosts() output count and pointers
! 677: are consistent.
! 678: * [Bug 1275] CID 45: CID 46: old sntp uses uninitialized guesses[0],
! 679: precs[0].
! 680: * [Bug 1276] CID 52: crypto_xmit() may call crypto_alice[23]()
! 681: with NULL peer.
! 682: (4.2.5p195) 2009/07/27 Released by Harlan Stenn <stenn@ntp.org>
! 683: * cvo.sh: Add support for CentOS, Fedora, Slackware, SuSE, and QNX.
! 684: (4.2.5p194) 2009/07/26 Released by Harlan Stenn <stenn@ntp.org>
! 685: * Documentation updates from Dave Mills.
! 686: * Use scripts/cvo.sh in the build script to get better subdir names.
! 687: (4.2.5p193) 2009/07/25 Released by Harlan Stenn <stenn@ntp.org>
! 688: * [Bug 1261] CID 34: simulate_server() rbuf.msg_flags uninitialized.
! 689: * [Bug 1262] CID 35: xpkt.mac uninitialized in simulate_server().
! 690: * [Bug 1263] CID 37: CID 38: CID 40: CID 43: multiple refclocks
! 691: uninitialized tm_zone (arc, chronolog, dumbclock, pcf).
! 692: * [Bug 1264] CID 64: gsoc_sntp on_wire() frees wrong ptr receiving KoD.
! 693: * [Bug 1265] CID 65: CID 66: gsoc_sntp on_wire() leaks x_pkt, r_pkt.
! 694: * [Bug 1266] CID 39: datum_pts_start() uninitialized arg.c_ospeed.
! 695: * [Bug 1267] CID 44: old sntp handle_saving() writes stack garbage to
! 696: file when clearing.
! 697: * [Bug 1268] CID 63: resolve_hosts() leaks error message buffer.
! 698: * [Bug 1269] CID 74: use assertion to ensure move_fd() does not return
! 699: negative descriptors.
! 700: * [Bug 1270] CID 70: gsoc_sntp recv_bcst_data mdevadr.ipv6mr_interface
! 701: uninitialized.
! 702: (4.2.5p192) 2009/07/24 Released by Harlan Stenn <stenn@ntp.org>
! 703: * [Bug 965] CID 42: ss_family uninitialized.
! 704: * [Bug 1250] CID 53: kod_init_kod_db() overruns kod_db malloc'd buffer.
! 705: * [Bug 1251] CID 68: search_entry() mishandles dst argument.
! 706: * [Bug 1252] CID 32: Quiet Coverity warning with assertion.
! 707: * [Bug 1253] CID 50: gsoc_sntp/crypto.c auth_init() always returns a
! 708: list with one entry.
! 709: * [Bug 1254] CID 56: tv_to_str() leaks a struct tm each call.
! 710: * [Bug 1255] CID 55: pkt_output() leaks a copy of each packet.
! 711: * [Bug 1256] CID 51: Coverity doesn't recognize our assertion macros as
! 712: terminal.
! 713: * [Bug 1257] CID 57: gsoc_sntp auth_init() fails to fclose(keyfile).
! 714: * [Bug 1258] CID 54: gsoc_sntp resolve_hosts() needs simplification.
! 715: * [Bug 1259] CID 59: gsoc_sntp recv_bcast_data() fails to free(rdata)
! 716: on error paths.
! 717: * [Bug 1260] CID 60: gsoc_sntp recvpkt() fails to free(rdata).
! 718: * Updated to AutoGen-5.9.9pre2.
! 719: (4.2.5p191) 2009/07/21 Released by Harlan Stenn <stenn@ntp.org>
! 720: * Updated to AutoGen-5.9.9pre1.
! 721: (4.2.5p190) 2009/07/20 Released by Harlan Stenn <stenn@ntp.org>
! 722: * Updated to AutoGen-5.9.8.
! 723: * [Bug 1248] RES_MSSNTP typo in ntp_proto.c.
! 724: * [Bug 1246] use a common template for singly-linked lists, convert most
! 725: doubly-linked lists to singly-linked.
! 726: * Log warning about signd blocking when restrict mssntp used.
! 727: (4.2.5p189) 2009/07/16 Released by Harlan Stenn <stenn@ntp.org>
! 728: * Documentation cleanup from Dave Mills.
! 729: (4.2.5p188) 2009/07/15 Released by Harlan Stenn <stenn@ntp.org>
! 730: * [Bug 1245] Broken xmt time sent in fast_xmit() of 4.2.5p187.
! 731: (4.2.5p187) 2009/07/11 Released by Harlan Stenn <stenn@ntp.org>
! 732: * [Bug 1042] multicast listeners IPv4+6 ignore new interfaces.
! 733: * [Bug 1237] Windows serial code treat CR and LF both as line
! 734: terminators.
! 735: * [Bug 1238] use fudge time2 for serial timecode offset in NMEA driver.
! 736: * [Bug 1242] Remove --enable-wintime, symmetric workaround is now
! 737: always enabled.
! 738: * [Bug 1244] NTP_INSIST(fd != maxactivefd) failure in intres child
! 739: * Added restrict keyword "mssntp" for Samba4 DC operation, by Dave Mills.
! 740: (4.2.5p186) 2009/07/08 Released by Harlan Stenn <stenn@ntp.org>
! 741: * ntp_proto.c cleanup from Dave Mills.
! 742: (4.2.5p185) 2009/07/01 Released by Harlan Stenn <stenn@ntp.org>
! 743: * Documentation updates from Dave Mills.
! 744: * [Bug 1234] convert NMEA driver to use common PPSAPI code.
! 745: * timepps-Solaris.h pps_handle_t changed from pointer to scalar
! 746: * Spectracom refclock added to Windows port of ntpd
! 747: * [Bug 1236] Declaration order fixed.
! 748: * Bracket private ONCORE debug statements with #if 0 rather than #ifdef
! 749: DEBUG
! 750: * Delete ONCORE debug statement that is now handled elsewhere.
! 751: (4.2.5p184) 2009/06/24 Released by Harlan Stenn <stenn@ntp.org>
! 752: * [Bug 1233] atom refclock fudge time1 sign flipped in 4.2.5p164.
! 753: (4.2.5p183) 2009/06/23 Released by Harlan Stenn <stenn@ntp.org>
! 754: * [Bug 1196] setsockopt(SO_EXCLUSIVEADDRUSE) can fail on Windows 2000
! 755: and earlier with WSAINVAL, do not log a complaint in that case.
! 756: * [Bug 1210] ONCORE driver terminates ntpd without logging a reason.
! 757: * [Bug 1218] Correct comment in refclock_oncore on /etc/ntp.oncore*
! 758: configuration file search order.
! 759: * Change ONCORE driver to log using msyslog as well as to any
! 760: clockstats file.
! 761: * [Bug 1231] ntpsnmpd build fails after sockaddr union changes.
! 762: (4.2.5p182) 2009/06/18 Released by Harlan Stenn <stenn@ntp.org>
! 763: * Add missing header dependencies to the ntpdc layout verification.
! 764: * prefer.html updates from Dave Mills.
! 765: * [Bug 1205] Add ntpd --usepcc and --pccfreq options on Windows
! 766: * [Bug 1215] unpeer by association ID
! 767: * [Bug 1225] Broadcast address miscalculated on Windows 4.2.5p180
! 768: * [Bug 1229] autokey segfaults in cert_install().
! 769: * Use a union for structs sockaddr, sockaddr_storage, sockaddr_in, and
! 770: sockaddr_in6 to remove casts and enable type checking. Collapse
! 771: some previously separate IPv4/IPv6 paths into a single codepath.
! 772: (4.2.5p181) 2009/06/06 Released by Harlan Stenn <stenn@ntp.org>
! 773: * [Bug 1206] Required compiler changes for Windows
! 774: * [Bug 1084] PPSAPI for ntpd on Windows with DLL backends
! 775: * [Bug 1204] Unix-style refclock device paths on Windows
! 776: * [Bug 1205] partial fix, disable RDTSC use by default on Windows
! 777: * [Bug 1208] decodenetnum() buffer overrun on [ with no ]
! 778: * [Bug 1211] keysdir free()d twice #ifdef DEBUG
! 779: * Enable ONCORE, ARCRON refclocks on Windows (untested)
! 780: (4.2.5p180) 2009/05/29 Released by Harlan Stenn <stenn@ntp.org>
! 781: * [Bug 1200] Enable IPv6 in Windows port
! 782: * Lose FLAG_FIXPOLL, from Dave Mills.
! 783: (4.2.5p179) 2009/05/23 Released by Harlan Stenn <stenn@ntp.org>
! 784: * [Bug 1041] xmt -> aorg timestamp cleanup from Dave Mills,
! 785: reported by Dave Hart.
! 786: * [Bug 1193] Compile error: conflicting types for emalloc.
! 787: * [Bug 1196] VC6 winsock2.h does not define SO_EXCLUSIVEADDRUSE.
! 788: * Leap/expire cleanup from Dave Mills.
! 789: (4.2.5p178) 2009/05/21 Released by Harlan Stenn <stenn@ntp.org>
! 790: * Provide erealloc() and estrdup(), a la emalloc().
! 791: * Improve ntp.conf's parser error messages.
! 792: * [Bug 320] "restrict default ignore" does not affect IPv6.
! 793: * [Bug 1192] "restrict -6 ..." reports a syntax error.
! 794: (4.2.5p177) 2009/05/18 Released by Harlan Stenn <stenn@ntp.org>
! 795: * Include (4.2.4p7)
! 796: * [Bug 1174] nmea_shutdown assumes that nmea has a unit assigned
! 797: * [Bug 1190] NMEA refclock fudge flag4 1 obscures position in timecode
! 798: * Update NMEA refclock documentation in html/drivers/driver20.html
! 799: (4.2.5p176) 2009/05/13 Released by Harlan Stenn <stenn@ntp.org>
! 800: * [Bug 1154] mDNS registration should be done later, repeatedly and only
! 801: if asked for. (second try for fix)
! 802: (4.2.5p175) 2009/05/12 Released by Harlan Stenn <stenn@ntp.org>
! 803: * Include (4.2.4p7-RC7)
! 804: * [Bug 1180] ntpd won't start with more than ~1000 interfaces
! 805: * [Bug 1182] Documentation typos and missing bits.
! 806: * [Bug 1183] COM port support should extend past COM3
! 807: * [Bug 1184] ntpd is deaf when restricted to second IP on the same net
! 808: * Clean up configure.ac NTP_CACHEVERSION interface, display cache
! 809: version when clearing. Fixes a regression.
! 810: (4.2.5p174) 2009/05/09 Released by Harlan Stenn <stenn@ntp.org>
! 811: * Stale leapsecond file fixes from Dave Mills.
! 812: (4.2.5p173) 2009/05/08 Released by Harlan Stenn <stenn@ntp.org>
! 813: * Include (4.2.4p7-RC6)
! 814: (4.2.5p172) 2009/05/06 Released by Harlan Stenn <stenn@ntp.org>
! 815: * [Bug 1175] Instability in PLL daemon mode.
! 816: * [Bug 1176] refclock_parse.c does not compile without PPSAPI.
! 817: (4.2.5p171) 2009/05/04 Released by Harlan Stenn <stenn@ntp.org>
! 818: * Autokey documentation cleanup from Dave Mills.
! 819: * [Bug 1171] line editing libs found without headers (Solaris 11)
! 820: * [Bug 1173] NMEA refclock fails with Solaris PPSAPI
! 821: * Fix problem linking msntp on Solaris when sntp subdir is configured
! 822: before parent caused by different gethostent library search order.
! 823: * Do not clear config.cache when it is empty.
! 824: (4.2.5p170) 2009/05/02 Released by Harlan Stenn <stenn@ntp.org>
! 825: * [Bug 1152] adjust PARSE to new refclock_pps logic
! 826: * Include (4.2.4p7-RC5)
! 827: * loopfilter FLL/PLL crossover cleanup from Dave Mills.
! 828: * Documentation updates from Dave Mills.
! 829: * ntp-keygen cleanup from Dave Mills.
! 830: * crypto API cleanup from Dave Mills.
! 831: * Add NTP_CACHEVERSION mechanism to ignore incompatible config.cache
! 832: * Enable gcc -Wstrict-overflow for gsoc_sntp as well
! 833: (4.2.5p169) 2009/04/30 Released by Harlan Stenn <stenn@ntp.org>
! 834: * [Bug 1171] Note that we never look for -lreadline by default.
! 835: * [Bug 1090] Fix bogus leap seconds in refclock_hpgps.
! 836: (4.2.5p168) 2009/04/29 Released by Harlan Stenn <stenn@ntp.org>
! 837: * Include (4.2.4p7-RC4)
! 838: * [Bug 1169] quiet compiler warnings
! 839: * Re-enable gcc -Wstrict-prototypes when not building with OpenSSL
! 840: * Enable gcc -Wstrict-overflow
! 841: * ntpq/ntpdc emit newline after accepting password on Windows
! 842: * Updates from Dave Mills:
! 843: * ntp-keygen.c: Updates.
! 844: * Fix the error return and syslog function ID in refclock_{param,ppsapi}.
! 845: * Make sure syspoll is within the peer's minpoll/maxpoll bounds.
! 846: * ntp_crypto.c: Use sign_siglen, not len. sign key filename cleanup.
! 847: * Bump NTP_MAXEXTEN from 1024 to 2048, update values for some field lengths.
! 848: * m4/ntp_lineeditlibs.m4: fix warnings from newer Autoconf
! 849: * [Bug 1166] Remove truncation of position (blanking) code in refclock_nmea.c
! 850: (4.2.5p167) 2009/04/26 Released by Harlan Stenn <stenn@ntp.org>
! 851: * Crypto cleanup from Dave Mills.
! 852: (4.2.5p166) 2009/04/25 Released by Harlan Stenn <stenn@ntp.org>
! 853: * [Bug 1165] Clean up small memory leaks in the config file parser
! 854: * Correct logconfig keyword declaration to MULTIPLE_ARG
! 855: * Enable filename and line number leak reporting on Windows when built
! 856: DEBUG for all the typical C runtime allocators such as calloc,
! 857: malloc, and strdup. Previously only emalloc calls were covered.
! 858: * Add DEBUG-only code to free dynamically allocated memory that would
! 859: otherwise remain allocated at ntpd exit, to allow less forgivable
! 860: leaks to stand out in leaks reported after exit.
! 861: * Ensure termination of strings in ports/winnt/libisc/isc_strerror.c
! 862: and quiet compiler warnings.
! 863: * [Bug 1057] ntpdc unconfig failure
! 864: * [Bug 1161] unpeer AKA unconfig command for ntpq :config
! 865: * PPS and crypto cleanup in ntp_proto.c from Dave Mills.
! 866: (4.2.5p165) 2009/04/23 Released by Harlan Stenn <stenn@ntp.org>
! 867: * WWVB refclock cleanup from Dave Mills.
! 868: * Code cleanup: requested_key -> request_key.
! 869: * [Bug 833] ignore whitespace at end of remote configuration lines
! 870: * [Bug 1033] ntpdc/ntpq crash prompting for keyid on Windows
! 871: * [Bug 1028] Support for W32Time authentication via Samba.
! 872: * quiet ntp_parser.c malloc redeclaration warning
! 873: * Mitigation and PPS/PPSAPI cleanup from Dave Mills.
! 874: * Documentation updates from Dave Mills.
! 875: * timepps-Solaris.h patches from Dave Hart.
! 876: (4.2.5p164) 2009/04/22 Released by Harlan Stenn <stenn@ntp.org>
! 877: * Include (4.2.4p7-RC3)
! 878: * PPS/PPSAPI cleanup from Dave Mills.
! 879: * Documentation updates from Dave Mills.
! 880: * [Bug 1125] C runtime per-thread initialization on Windows
! 881: * [Bug 1152] temporarily disable refclock_parse, refclock_true until
! 882: maintainers can repair build break from pps_sample()
! 883: * [Bug 1153] refclock_nmea should not mix UTC with GPS time
! 884: * [Bug 1159] ntpq overlap diagnostic message test buggy
! 885: (4.2.5p163) 2009/04/10 Released by Harlan Stenn <stenn@ntp.org>
! 886: (4.2.5p162) 2009/04/09 Released by Harlan Stenn <stenn@ntp.org>
! 887: * Documentation updates from Dave Mills.
! 888: * Mitigation and PPS cleanup from Dave Mills.
! 889: * Include (4.2.4p7-RC2)
! 890: * [Bug 216] New interpolation scheme for Windows eliminates 1ms jitter
! 891: * remove a bunch of #ifdef SYS_WINNT from portable code
! 892: * 64-bit time_t cleanup for building on newer Windows compilers
! 893: * Only set CMOS clock during ntpd exit on Windows if the computer is
! 894: shutting down or restarting.
! 895: * [Bug 1148] NMEA reference clock improvements
! 896: * remove deleted gsoc_sntp/utilities.o from repository so that .o build
! 897: products can be cleaned up without corrupting the repository.
! 898: (4.2.5p161) 2009/03/31 Released by Harlan Stenn <stenn@ntp.org>
! 899: * Documentation updates from Dave Mills.
! 900: (4.2.5p160) 2009/03/30 Released by Harlan Stenn <stenn@ntp.org>
! 901: * [Bug 1141] refclock_report missing braces cause spurious "peer event:
! 902: clock clk_unspec" log entries
! 903: * Include (4.2.4p7-RC1)
! 904: (4.2.5p159) 2009/03/28 Released by Harlan Stenn <stenn@ntp.org>
! 905: * "bias" changes from Dave Mills.
! 906: (4.2.5p158) 2009/01/30 Released by Harlan Stenn <stenn@ntp.org>
! 907: * Fix [CID 72], a typo introduced at the latest fix to prettydate.c.
! 908: (4.2.5p157) 2009/01/26 Released by Harlan Stenn <stenn@ntp.org>
! 909: * Cleanup/fixes for ntp_proto.c and ntp_crypto.c from Dave Mills.
! 910: (4.2.5p156) 2009/01/19 Released by Harlan Stenn <stenn@ntp.org>
! 911: * [Bug 1118] Fixed sign extension for 32 bit time_t in caljulian() and prettydate().
! 912: Fixed some compiler warnings about missing prototypes.
! 913: Fixed some other simple compiler warnings.
! 914: * [Bug 1119] [CID 52] Avoid a possible null-dereference in ntp_crypto.c.
! 915: * [Bug 1120] [CID 51] INSIST that peer is non-null before we dereference it.
! 916: * [Bug 1121] [CID 47] double fclose() in ntp-keygen.c.
! 917: (4.2.5p155) 2009/01/18 Released by Harlan Stenn <stenn@ntp.org>
! 918: * Documentation updates from Dave Mills.
! 919: * CHU frequency updates.
! 920: * Design assertion fixes for ntp_crypto.c from Dave Mills.
! 921: (4.2.5p154) 2009/01/13 Released by Harlan Stenn <stenn@ntp.org>
! 922: * [Bug 992] support interface event change on Linux from
! 923: Miroslav Lichvar.
! 924: (4.2.5p153) 2009/01/09 Released by Harlan Stenn <stenn@ntp.org>
! 925: * Renamed gsoc_sntp/:fetch-stubs to gsoc_sntp/fetch-stubs to avoid
! 926: file name problems under Windows.
! 927: Removed German umlaut from log msg for 4.2.5p142.
! 928: (4.2.5p152) 2009/01/08 Released by Harlan Stenn <stenn@ntp.org>
! 929: * Include (4.2.4p6) 2009/01/08 Released by Harlan Stenn <stenn@ntp.org>
! 930: (4.2.5p151) 2008/12/23 Released by Harlan Stenn <stenn@ntp.org>
! 931: * Stats file logging cleanup from Dave Mills.
! 932: (4.2.5p150) 2008/12/15 Released by Harlan Stenn <stenn@ntp.org>
! 933: * [Bug 1099] Fixed wrong behaviour in sntp's crypto.c.
! 934: * [Bug 1103] Fix 64-bit issues in the new calendar code.
! 935: (4.2.5p149) 2008/12/05 Released by Harlan Stenn <stenn@ntp.org>
! 936: * Fixed mismatches in data types and OID definitions in ntpSnmpSubAgent.c
! 937: * added a premliminary MIB file to ntpsnmpd (ntpv4-mib.mib)
! 938: (4.2.5p148) 2008/12/04 Released by Harlan Stenn <stenn@ntp.org>
! 939: * [Bug 1070] Fix use of ntpq_parsestring() in ntpsnmpd.
! 940: (4.2.5p147) 2008/11/27 Released by Harlan Stenn <stenn@ntp.org>
! 941: * Update gsoc_sntp's GCC warning code.
! 942: (4.2.5p146) 2008/11/26 Released by Harlan Stenn <stenn@ntp.org>
! 943: * Update Solaris CFLAGS for gsoc_sntp.
! 944: (4.2.5p145) 2008/11/20 Released by Harlan Stenn <stenn@ntp.org>
! 945: * Deal with time.h for sntp under linux.
! 946: * Provide rpl_malloc() for sntp for systems that need it.
! 947: * Handle ss_len and socklen type for sntp.
! 948: * Fixes to the sntp configure.ac script.
! 949: * Provide INET6_ADDRSTRLEN if it is missing.
! 950: * [Bug 1095] overflow in caljulian.c.
! 951: (4.2.5p144) 2008/11/19 Released by Harlan Stenn <stenn@ntp.org>
! 952: * Use int32, not int32_t.
! 953: * Avoid the sched*() functions under OSF - link problems.
! 954: (4.2.5p143) 2008/11/17 Released by Harlan Stenn <stenn@ntp.org>
! 955: * sntp cleanup and fixes.
! 956: (4.2.5p142) 2008/11/16 Released by Harlan Stenn <stenn@ntp.org>
! 957: * Imported GSoC SNTP code from Johannes Maximilian Kuehn.
! 958: (4.2.5p141) 2008/11/13 Released by Harlan Stenn <stenn@ntp.org>
! 959: * New caltontp.c and calyearstart.c from Juergen Perlinger.
! 960: (4.2.5p140) 2008/11/12 Released by Harlan Stenn <stenn@ntp.org>
! 961: * Cleanup lint from the ntp_scanner files.
! 962: * [Bug 1011] gmtime() returns NULL on windows where it would not under Unix.
! 963: * Updated caljulian.c and prettydate.c from Juergen Perlinger.
! 964: (4.2.5p139) 2008/11/11 Released by Harlan Stenn <stenn@ntp.org>
! 965: * Typo fix to driver20.html.
! 966: (4.2.5p138) 2008/11/10 Released by Harlan Stenn <stenn@ntp.org>
! 967: * [Bug 474] --disable-ipv6 is broken.
! 968: * IPv6 interfaces were being looked for twice.
! 969: * SHM driver grabs more samples, add clockstats
! 970: * decode.html and driver20.html updates from Dave Mills.
! 971: (4.2.5p137) 2008/11/01 Released by Harlan Stenn <stenn@ntp.org>
! 972: * [Bug 1069] #undef netsnmp's PACKAGE_* macros.
! 973: * [Bug 1068] Older versions of netsnmp do not have netsnmp_daemonize().
! 974: (4.2.5p136) 2008/10/27 Released by Harlan Stenn <stenn@ntp.org>
! 975: * [Bug 1078] statsdir configuration parsing is broken.
! 976: (4.2.5p135) 2008/09/23 Released by Harlan Stenn <stenn@ntp.org>
! 977: * [Bug 1072] clock_update should not allow updates older than sys_epoch.
! 978: (4.2.5p134) 2008/09/17 Released by Harlan Stenn <stenn@ntp.org>
! 979: * Clean up build process for ntpsnmpd.
! 980: (4.2.5p133) 2008/09/16 Released by Harlan Stenn <stenn@ntp.org>
! 981: * Add options processing to ntpsnmpd.
! 982: * [Bug 1062] Check net-snmp headers before deciding to build ntpsnmpd.
! 983: * Clean up the libntpq.a build.
! 984: * Regenerate ntp_parser.[ch] from ntp_parser.y
! 985: (4.2.5p132) 2008/09/15 Released by Harlan Stenn <stenn@ntp.org>
! 986: * [Bug 1067] Multicast DNS service registration must come after the fork
! 987: on Solaris.
! 988: * [Bug 1066] Error messages should log as errors.
! 989: (4.2.5p131) 2008/09/14 Released by Harlan Stenn <stenn@ntp.org>
! 990: * [Bug 1065] Re-enable support for the timingstats file.
! 991: (4.2.5p130) 2008/09/13 Released by Harlan Stenn <stenn@ntp.org>
! 992: * [Bug 1064] Implement --with-net-snmp-config=progname
! 993: * [Bug 1063] ntpSnmpSubagentObject.h is missing from the distribution.
! 994: (4.2.5p129) 2008/09/11 Released by Harlan Stenn <stenn@ntp.org>
! 995: * Quiet some libntpq-related warnings.
! 996: (4.2.5p128) 2008/09/08 Released by Harlan Stenn <stenn@ntp.org>
! 997: * Import Heiko Gerstung's GSoC2008 NTP MIB daemon.
! 998: (4.2.5p127) 2008/09/01 Released by Harlan Stenn <stenn@ntp.org>
! 999: * Regenerate ntpd/ntp_parser.c
! 1000: (4.2.5p126) 2008/08/31 Released by Harlan Stenn <stenn@ntp.org>
! 1001: * Stop libtool-1.5 from looking for C++ or Fortran.
! 1002: * [BUG 610] Documentation update for NMEA reference clock driver.
! 1003: * [Bug 828] Fix IPv4/IPv6 address parsing.
! 1004: * Changes from Dave Mills:
! 1005: Documentation updates.
! 1006: Fix a corner case where a frequency update was reported but not set.
! 1007: When LEAP_NOTINSYNC->LEAP_NOWARNING, call crypto_update() if we have
! 1008: crypto_flags.
! 1009: (4.2.5p125) 2008/08/18 Released by Harlan Stenn <stenn@ntp.org>
! 1010: * [Bug 1052] Add linuxPPS support to ONCORE driver.
! 1011: (4.2.5p124) 2008/08/17 Released by Harlan Stenn <stenn@ntp.org>
! 1012: * Documentation updates from Dave Mills.
! 1013: * Include (4.2.4p5) 2008/08/17 Released by Harlan Stenn <stenn@ntp.org>
! 1014: * [Bug 861] leap info was not being transmitted.
! 1015: * [Bug 1046] refnumtoa.c is using the wrong header file.
! 1016: * [Bug 1047] enable/disable options processing fix.
! 1017: * header file cleanup.
! 1018: * [Bug 1037] buffer in subroutine was 1 byte short.
! 1019: * configure.ac: cleanup, add option for wintime, and lay the groundwork
! 1020: for the changes needed for bug 1028.
! 1021: * Fixes from Dave Mills: 'bias' and 'interleave' work. Separate
! 1022: phase and frequency discipline (for long poll intervals). Update
! 1023: TAI function to match current leapsecond processing.
! 1024: * Documentation updates from Dave Mills.
! 1025: * [Bug 1037] Use all 16 of the MD5 passwords generated by ntp-keygen.
! 1026: * Fixed the incorrect edge parameter being passed to time_pps_kcbind in
! 1027: NMEA refclock driver.
! 1028: * [Bug 399] NMEA refclock driver does not honor time1 offset if flag3 set.
! 1029: * [Bug 985] Modifications to NMEA reference clock driver to support Accord
! 1030: GPS Clock.
! 1031: * poll time updates from Dave Mills.
! 1032: * local refclock documentation updates from Dave Mills.
! 1033: * [Bug 1022] Fix compilation problems with yesterday's commit.
! 1034: * Updates and cleanup from Dave Mills:
! 1035: I've now spent eleven months of a sabbatical year - 7 days a week, 6-10
! 1036: hours most days - working on NTP. I have carefully reviewed every major
! 1037: algorithm, examined its original design and evolution from that design.
! 1038: I've trimmed off dead code and briar patches and did zillions of tests
! 1039: contrived to expose evil vulnerabilities. The development article is in
! 1040: rather good shape and should be ready for prime time.
! 1041:
! 1042: 1. The protostats statistics files have been very useful in exposing
! 1043: little twitches and turns when something hiccups, like a broken PPS
! 1044: signal. Most of what used to be syslog messages are now repackaged as
! 1045: protostats messages with optional syslog as well. These can also be sent
! 1046: as traps which might be handy to tiggle a beeper or celltext. These, the
! 1047: sysstats files and cryptostats files reveal the ambient health of a busy
! 1048: server, monitor traffic and error counts and spot crypto attacks.
! 1049:
! 1050: 2. Close inspection of the clock discipline behavior at long poll
! 1051: intervals (36 h) showed it not doing as well as it should. I redesigned
! 1052: the FLL loop to improve nominal accuracy from several tens of
! 1053: milliseconds to something less than ten milliseconds.
! 1054:
! 1055: 3. Autokey (again). The enhanced error checking was becoming a major
! 1056: pain. I found a way to toss out gobs of ugly fat code and replace the
! 1057: function with a much simpler and more comprehensive scheme. It resists
! 1058: bait-and-switch attacks and quickly detect cases when the protocol is
! 1059: not correctly synchronized.
! 1060:
! 1061: 4. The interface code for the kernel PPS signal was not in sync with the
! 1062: kernel code itself. Some error checks were duplicated and some
! 1063: ineffective. I found none of the PPS-capable drivers, including the atom
! 1064: driver, do anything when the prefer peer fails; the kernel PPS signal
! 1065: remains in control. The atom driver now disables the kernel PPS when the
! 1066: prefer peer comes bum. This is important when the prefer peer is not a
! 1067: reference clock but a remote NTP server.
! 1068:
! 1069: 5. The flake restrict bit turned out to be really interesting,
! 1070: especially with symmtric modes and of those especially those using
! 1071: Autokey. Small changes in the recovery procedures when packets are lost
! 1072: now avoid almost all scenarios which previously required protocol resets.
! 1073:
! 1074: 6. I've always been a little uncomfortable when using the clock filter
! 1075: with long poll intervals because the samples become less and less
! 1076: correlated as the sample age exceeds the Allan intercept. Various
! 1077: schemes have been used over the years to cope with this fact. The latest
! 1078: one and the one that works the best is to use a modified sort metric
! 1079: where the delay is used when the age of the sample is less than the
! 1080: intercept and the sum of delay and dispersion above that. The net result
! 1081: is that, at small poll intervals the algorithm operates as a minimum
! 1082: filter, while at larger poll intervals it morphs to FIFO. Left
! 1083: unmodified, a sample could be used when twelve days old. This along with
! 1084: the FLL modifications has made a dramatic improvement at large poll
! 1085: intervals.
! 1086:
! 1087: - [Backward Incompatible] The 'state' variable is no longer reported or
! 1088: available via ntpq output. The following system status bit names
! 1089: have been changed:
! 1090: - sync_alarm -> leap_alarm
! 1091: - sync_atomic -> sync_pps
! 1092: - sync_lf_clock -> sync_lf_radio
! 1093: - sync_hf_clock -> sync_hf_radio
! 1094: - sync_uhf_clock -> sync_uhf_radio
! 1095: - sync_local_proto -> sync_local
! 1096: - sync_udp/time -> sync_other
! 1097: Other names have been changed as well. See the change history for
! 1098: libntp/statestr.c for more details.
! 1099: Other backward-incompatible changes in ntpq include:
! 1100: - assID -> associd
! 1101: - rootdispersion -> rootdisp
! 1102: - pkt_head -> pkt_neader
! 1103: See the change history for other details.
! 1104:
! 1105: * Updates and cleanup from Dave Mills.
! 1106: * [Bug 995] Remove spurious ; from ntp-keygen.c.
! 1107: * More cleanup and changes from Dave Mills.
! 1108: * [Bug 980] Direct help to stdout.
! 1109: ---
! 1110: (4.2.4p8) 2009/12/08 Released by Harlan Stenn <stenn@ntp.org>
! 1111:
! 1112: * [Sec 1331] DoS with mode 7 packets - CVE-2009-3563.
! 1113:
! 1114: ---
! 1115: (4.2.4p7) 2009/05/18 Released by Harlan Stenn <stenn@ntp.org>
! 1116:
! 1117: * [Sec 1151] Remote exploit if autokey is enabled - CVE-2009-1252.
! 1118: * [Bug 1187] Update the copyright date.
! 1119: * [Bug 1191] ntpd fails on Win2000 - "Address already in use" after fix
! 1120: for [Sec 1149].
! 1121:
! 1122: ---
! 1123: (4.2.4p7-RC7) 2009/05/12 Released by Harlan Stenn <stenn@ntp.org>
! 1124:
! 1125: * ntp.isc.org -> ntp.org cleanup.
! 1126: * [Bug 1178] Use prior FORCE_DNSRETRY behavior as needed at runtime,
! 1127: add configure --enable-ignore-dns-errors to be even more stubborn
! 1128:
! 1129: ---
! 1130: (4.2.4p7-RC6) 2009/05/08 Released by Harlan Stenn <stenn@ntp.org>
! 1131:
! 1132: * [Bug 784] Make --enable-linuxcaps the default when available
! 1133: * [Bug 1179] error messages for -u/--user and -i lacking droproot
! 1134: * Updated JJY reference clock driver from Takao Abe
! 1135: * [Bug 1071] Log a message and exit before trying to use FD_SET with a
! 1136: descriptor larger than FD_SETSIZE, which will corrupt memory
! 1137: * On corruption of the iface list head in add_interface, log and exit
! 1138:
! 1139: ---
! 1140: (4.2.4p7-RC5) 2009/05/02 Released by Harlan Stenn <stenn@ntp.org>
! 1141:
! 1142: * [Bug 1172] 4.2.4p7-RC{3,4} fail to build on linux.
! 1143: * flock-build script unportable 'set -m' use removed
! 1144:
! 1145: ---
! 1146: (4.2.4p7-RC4) 2009/04/29 Released by Harlan Stenn <stenn@ntp.org>
! 1147:
! 1148: * [Bug 1167] use gcc -Winit-self only if it is understood
! 1149:
! 1150: ---
! 1151: (4.2.4p7-RC3) 2009/04/22 Released by Harlan Stenn <stenn@ntp.org>
! 1152:
! 1153: * [Bug 787] Bug fixes for 64-bit time_t on Windows
! 1154: * [Bug 813] Conditional naming of Event
! 1155: * [Bug 1147] System errors should be logged to msyslog()
! 1156: * [Bug 1155] Fix compile problem on Windows with VS2005
! 1157: * [Bug 1156] lock_thread_to_processor() should be declared in header
! 1158: * [Bug 1157] quiet OpenSSL warnings, clean up configure.ac
! 1159: * [Bug 1158] support for aix6.1
! 1160: * [Bug 1160] MacOS X is like BSD regarding F_SETOWN
! 1161:
! 1162: ---
! 1163: (4.2.4p7-RC2) 2009/04/09 Released by Harlan Stenn <stenn@ntp.org>
! 1164:
! 1165: * [Sec 1144] limited buffer overflow in ntpq. CVE-2009-0159
! 1166: * [Sec 1149] use SO_EXCLUSIVEADDRUSE on Windows
! 1167:
! 1168: ---
! 1169: (4.2.4p7-RC1) 2009/03/30 Released by Harlan Stenn <stenn@ntp.org>
! 1170:
! 1171: * [Bug 1131] UDP sockets should not use SIGPOLL on Solaris.
! 1172: * build system email address cleanup
! 1173: * [Bug 774] parsesolaris.c does not compile under the new Solaris
! 1174: * [Bug 873] Windows serial refclock proper TTY line discipline emulation
! 1175: * [Bug 1014] Enable building with VC9 (in Visual Studio 2008,
! 1176: Visual C++ 2008, or SDK)
! 1177: * [Bug 1117] Deferred interface binding under Windows works only correctly
! 1178: if FORCE_DNSRETRY is defined
! 1179: * [BUG 1124] Lock QueryPerformanceCounter() client threads to same CPU
! 1180: * DPRINTF macro made safer, always evaluates to a statement and will not
! 1181: misassociate an else which follows the macro.
! 1182:
! 1183: ---
! 1184: (4.2.4p6) 2009/01/08 Released by Harlan Stenn <stenn@ntp.org>
! 1185:
! 1186: * [Bug 1113] Fixed build errors with recent versions of openSSL.
! 1187: * [Sec 1111] Fix incorrect check of EVP_VerifyFinal()'s return value.
! 1188: * Update the copyright year.
! 1189:
! 1190: ---
! 1191: (4.2.4p5) 2008/08/17 Released by Harlan Stenn <stenn@ntp.org>
! 1192:
! 1193: * [BUG 1051] Month off by one in leap second message written to clockstats
! 1194: file fixed.
! 1195: * [Bug 450] Windows only: Under original Windows NT we must not discard the
! 1196: wildcard socket to workaround a bug in NT's getsockname().
! 1197: * [Bug 1038] Built-in getpass() function also prompts for password if
! 1198: not built with DEBUG.
! 1199: * [Bug 841] Obsolete the "dynamic" keyword and make deferred binding
! 1200: to local interfaces the default.
! 1201: Emit a warning if that keyword is used for configuration.
! 1202: * [Bug 959] Refclock on Windows not properly releasing recvbuffs.
! 1203: * [Bug 993] Fix memory leak when fetching system messages.
! 1204: * much cleanup, fixes, and changes from Dave Mills.
! 1205: * ntp_control.c: LEAPTAB is a filestamp, not an unsigned. From Dave Mills.
! 1206: * ntp_config.c: ntp_minpoll fixes from Dave Mills.
! 1207: * ntp-keygen updates from Dave Mills.
! 1208: * refresh epoch, throttle, and leap cleanup from Dave Mills.
! 1209: * Documentation cleanup from Dave Mills.
! 1210: * [Bug 918] Only use a native md5.h if MD5Init() is available.
! 1211: * [Bug 979] Provide ntptimeval if it is not otherwise present.
! 1212: * [Bug 634] Re-instantiate syslog() and logfiles after the daemon fork.
! 1213: * [Bug 952] Use md5 code with a friendlier license.
! 1214: * [Bug 977] Fix mismatching #ifdefs for builds without IPv6.
! 1215: * [Bug 830] Fix the checking order of the interface options.
! 1216: * Clean up the logfile/syslog setup.
! 1217: * [Bug 970] Lose obsolete -g flag to ntp-keygen.
! 1218: * The -e flag to ntp-keygen can write GQ keys now, too.
! 1219: * ntp_proto.c: sys_survivors and hpoll cleanup from Dave Mills.
! 1220: * ntp_loopfilter.c: sys_poll cleanup from Dave Mills.
! 1221: * refclock_wwv.c: maximum-likelihood digit and DSYNC fixes from Dave Mills.
! 1222: * [Bug 967] preemptable associations are lost forever on a step.
! 1223: * ntp_config.c: [CID 48] missing "else" clause.
! 1224: * [Bug 833] ntpq config keyword is quote-mark unfriendly.
! 1225: * Rename the ntpq "config" keyword to ":config".
! 1226: * Dave Mills shifted some orphan processing.
! 1227: * Fix typos in the [Bug 963] patch.
! 1228: * bootstrap: squawk if genver fails. Use -f with cp in case Dave does a chown.
! 1229: * Remove obsolete simulator command-line options.
! 1230: * ntp_request.c: [CID 36] zero sin_zero.
! 1231: * [Bug 963] get_systime() is too noisy.
! 1232: * [Bug 960] spurious syslog:crypto_setup:spurious crypto command
! 1233: * [Bug 964] Change *-*-linux* to *-*-*linux* to allow for uclinux.
! 1234: * Changes from Dave Mills:
! 1235: - ntp_util.c: cleanup.
! 1236: - ntp_timer.c: watch the non-burst packet rate.
! 1237: - ntp_request.c: cleanup.
! 1238: - ntp_restrict.c: RES_LIMITED cleanup.
! 1239: - ntp_proto.c: RES_LIMITED, rate bucktes, counters, overall cleanup.
! 1240: - ntp_peer.c: disallow peer_unconfig().
! 1241: - ntp_monitor.c: RES_LIMITED cleanup.
! 1242: - ntp_loopfilter.c: poll interval cleanup.
! 1243: - ntp_crypto.c: volley -> retry. Cleanup TAI leap message.
! 1244: - ntp_config: average and minimum are ^2 values.
! 1245: - ntpdc: unknownversion is really "declined", not "bad version".
! 1246: - Packet retry cleanup.
! 1247: * [Bug 961] refclock_tpro.c:tpro_poll() calls refclock_receive() twice.
! 1248: * [Bug 957] Windows only: Let command line parameters from the Windows SCM GUI
! 1249: override the standard parameters from the ImagePath registry key.
! 1250: * Added HAVE_INT32_T to the Windows config.h to avoid duplicate definitions.
! 1251: * Work around a VPATH difference in FreeBSD's 'make' command.
! 1252: * Update bugreport URL.
! 1253: * Update -I documentation.
! 1254: * [Bug 713] Fix bug reporting information.
! 1255: * A bug in the application of the negative-sawtooth for 12 channel receivers.
! 1256: * The removal of unneeded startup code used for the original LinuxPPS, it now
! 1257: conforms to the PPSAPI and does not need special code.
! 1258: * ntp-keygen.c: Coverity fixes [CID 33,47].
! 1259: * Volley cleanup from Dave Mills.
! 1260: * Fuzz cleanup from Dave Mills.
! 1261: * [Bug 861] Leap second cleanups from Dave Mills.
! 1262: * ntpsim.c: add missing protypes and fix [CID 34], a nit.
! 1263: * Upgraded bison at UDel.
! 1264: * Update br-flock and flock-build machine lists.
! 1265: * [Bug 752] QoS: add parse/config handling code.
! 1266: * Fix the #include order in tickadj.c for picky machines.
! 1267: * [Bug 752] QoS: On some systems, netinet/ip.h needs netinet/ip_systm.h.
! 1268: * [Bug 752] Update the QoS tagging (code only - configuration to follow).
! 1269: * Orphan mode and other protocol cleanup from Dave Mills.
! 1270: * Documentation cleanup from Dave Mills.
! 1271: * [Bug 940] ntp-keygen uses -v. Disallow it as a shortcut for --version.
! 1272: * more cleanup to ntp_lineeditlibs.m4.
! 1273: * Documentation updates from Dave Mills.
! 1274: * -ledit cleanup for ntpdc and ntpq.
! 1275: * Association and other cleanup from Dave Mills.
! 1276: * NTP_UNREACH changes from Dave Mills.
! 1277: * Fix the readline history test.
! 1278: * [Bug 931] Require -lreadline to be asked for explicitly.
! 1279: * [Bug 764] When looking for -lreadline support, also try using -lncurses.
! 1280: * [Bug 909] Fix int32_t errors for ntohl().
! 1281: * [Bug 376/214] Enhancements to support multiple if names and IP addresses.
! 1282: * [Bug 929] int32_t is undefined on Windows. Casting wrong.
! 1283: * [Bug 928] readlink missing braces.
! 1284: * [Bug 788] Update macros to support VS 2005.
! 1285: * ntpd/ntp_timer.c: add missing sys_tai parameter for debug printf
! 1286: * [Bug 917] config parse leaves files open
! 1287: * [Bug 912] detect conflicting enable/disable configuration on interfaces
! 1288: sharing an IP address
! 1289: * [Bug 771] compare scopeid if available for IPv6 addresses
! 1290: * Lose obsolete crypto subcommands (Dave Mills).
! 1291: * WWV is an HF source, not an LF source (Dave Mills).
! 1292: * [Bug 899] Only show -i/--jaildir -u/--user options if we HAVE_DROPROOT.
! 1293: * [Bug 916] 'cryptosw' is undefined if built without OpenSSL.
! 1294: * [Bug 891] 'restrict' config file keyword does not work (partial fix).
! 1295: * [Bug 890] the crypto command seems to be required now.
! 1296: * [Bug 915] ntpd cores during processing of x509 certificates.
! 1297: * Crypto lint cleanup from Dave Mills.
! 1298: * [Bug 897] Check RAND_status() - we may not need a .rnd file.
! 1299: * Crypto cleanup from Dave Mills.
! 1300: * [Bug 911] Fix error message in cmd_args.c.
! 1301: * [Bug 895] Log assertion failures via syslog(), not stderr.
! 1302: * Documentation updates from Dave Mills.
! 1303: * Crypto cleanup from Dave Mills.
! 1304: * [Bug 905] ntp_crypto.c fails to compile without -DDEBUG.
! 1305: * Avoid double peer stats logging.
! 1306: * ntp-keygen cleanup from Dave Mills.
! 1307: * libopts needs to be built after ElectricFence.
! 1308: * [Bug 894] Initialize keysdir before calling crypto_setup().
! 1309: * Calysto cleanup for ntpq.
! 1310: * ntp-keygen -i takes an arg.
! 1311: * Cleanup and fixes from Dave Mills.
! 1312: * [Bug 887] Fix error in ntp_types.h (for sizeof int != 4).
! 1313: * Bug 880 bug fixes for Windows build
! 1314: * Improve Calysto support.
! 1315: * The "revoke" parameter is a crypto command.
! 1316: * The driftfile wander threshold is a real number.
! 1317: * [Bug 850] Fix the wander threshold parameter on the driftfile command.
! 1318: * ntp_io.c: Dead code cleanup - Coverity View 19.
! 1319: * Leap file related cleanup from Dave Mills.
! 1320: * ntp_peer.c: Set peer->srcadr before (not after) calling set_peerdstadr().
! 1321: * Initialize offset in leap_file() - Coverity View 17.
! 1322: * Use the correct stratum on KISS codes.
! 1323: * Fuzz bits cleanup.
! 1324: * Show more digits in some debug printf's.
! 1325: * Use drift_file_sw internally to control writing the drift file.
! 1326: * Implement the wander_threshold option for the driftfile config keyword.
! 1327: * reformat ntp_control.c; do not use c++ // comments.
! 1328: * [Bug 629] Undo bug #629 fixes as they cause more problems than were being
! 1329: solved
! 1330: * Changes from Dave Mills: in/out-bound data rates, leapsecond cleanup,
! 1331: driftfile write cleanup, packet buffer length checks, documentation updates.
! 1332: * More assertion checks and malloc()->emalloc(), courtesy of Calysto.
! 1333: * [Bug 864] Place ntpd service in maintenance mode if using SMF on Solaris
! 1334: * [Bug 862] includefile nesting; preserve phonelist on reconfig.
! 1335: * [Bug 604] ntpd regularly dies on linux/alpha.
! 1336: * more leap second infrastructure fixes from Dave Mills.
! 1337: * [Bug 858] recent leapfile changes broke non-OpenSSL builds.
! 1338: * Use emalloc() instead of malloc() in refclock_datum.c (Calysto).
! 1339: * Start using 'design by contract' assertions.
! 1340: * [Bug 767] Fast sync to refclocks wanted.
! 1341: * Allow null driftfile.
! 1342: * Use YYERROR_VERBOSE for the new parser, and fix related BUILT_SOURCES.
! 1343: * [Bug 629] changes to ensure broadcast works including on wildcard addresses
! 1344: * [Bug 853] get_node() must return a pointer to maximally-aligned memory.
! 1345: * Initial leap file fixes from Dave Mills.
! 1346: * [Bug 858] Recent leapfile changes broke without OPENSSL.
! 1347: * Use a char for DIR_SEP, not a string.
! 1348: * [Bug 850] driftfile parsing changes.
! 1349: * driftfile maintenance changes from Dave Mills. Use clock_phi instead of
! 1350: stats_write_tolerance.
! 1351: * [Bug 828] refid string not being parsed correctly.
! 1352: * [Bug 846] Correct includefile parsing.
! 1353: * [Bug 827] New parsing code does not handle "fudge" correctly.
! 1354: * Enable debugging capability in the config parser.
! 1355: * [Bug 839] Crypto password not read from ntp.conf.
! 1356: * Have autogen produce writable output files.
! 1357: * [Bug 825] Correct logconfig -/+ keyword processing.
! 1358: * [Bug 828] Correct parsing of " delimited strings.
! 1359: * Cleanup FILE * usage after fclose() in ntp_filegen.c.
! 1360: * [Bug 843] Windows Completion port code was incorrectly merged from -stable.
! 1361: * [Bug 840] do fudge configuration AFTER peers (thus refclocks) have been
! 1362: configured.
! 1363: * [Bug 824] Added new parser modules to the Windows project file.
! 1364: * [Bug 832] Add libisc/log.c headers to the distribution.
! 1365: * [Bug 808] Only write the drift file if we are in state 4.
! 1366: * Initial import of libisc/log.c and friends.
! 1367: * [Bug 826] Fix redefinition of PI.
! 1368: * [Bug 825] ntp_scanner.c needs to #include <config.h> .
! 1369: * [Bug 824] New parser code has some build problems with the SIM code.
! 1370: * [Bug 817] Use longnames for setting ntp variables on the command-line;
! 1371: Allowing '-v' with and without an arg to disambiguate usage is error-prone.
! 1372: * [Bug 822] set progname once, early.
! 1373: * [Bug 819] remove erroneous #if 0 in Windows completion port code.
! 1374: * The new config code missed an #ifdef for building without refclocks.
! 1375: * Distribute some files needed by the new config parsing code.
! 1376: * [Bug 819] Timeout for WaitForMultipleObjects was 500ms instead of INFINITE
! 1377: * Use autogen 5.9.1.
! 1378: * Fix clktest command-line arg processing.'
! 1379: * Audio documentation updates from Dave Mills.
! 1380: * New config file parsing code, from Sachin Kamboj.
! 1381: * fuzz bit cleanup from Dave Mills.
! 1382: * replay cleanup from Dave Mills.
! 1383: * [Bug 542] Tolerate missing directory separator at EO statsdir.
! 1384: * [Bug 812] ntpd should drop supplementary groups.
! 1385: * [Bug 815] Fix warning compiling 4.2.5p22 under Windows with VC6.
! 1386: * [Bug 740] Fix kernel/daemon startup drift anomaly.
! 1387: * refclock_wwv.c fixes from Dave Mills.
! 1388: * [Bug 810] Fix ntp-keygen documentation.
! 1389: * [Bug 787] Bug fixes for 64-bit time_t on Windows.
! 1390: * [Bug 796] Clean up duplicate #defines in ntp_control.c.
! 1391: * [Bug 569] Use the correct precision for the Leitch CSD-5300.
! 1392: * [Bug 795] Moved declaration of variable to top of function.
! 1393: * [Bug 798] ntpq [p typo crashes ntpq/ntpdc.
! 1394: * [Bug 786] Fix refclock_bancomm.c on Solaris.
! 1395: * [Bug 774] parsesolaris.c does not compile under the new Solaris.
! 1396: * [Bug 782] Remove P() macros from Windows files.
! 1397: * [Bug 778] ntpd fails to lock with drift=+500 when started with drift=-500.
! 1398: * [Bug 592] Trimble Thunderbolt GPS support.
! 1399: * IRIG, CHU, WWV, WWVB refclock improvements from Dave Mills.
! 1400: * [Bug 757] Lose ULONG_CONST().
! 1401: * [Bug 756] Require ANSI C (function prototypes).
! 1402: * codec (audio) and ICOM changes from Dave Mills.
! 1403:
! 1404: ---
! 1405:
! 1406: * [Bug 450] Windows only: Under original Windows NT we must not discard the
! 1407: wildcard socket to workaround a bug in NT's getsockname().
! 1408: * [Bug 1038] Built-in getpass() function also prompts for password if
! 1409: not built with DEBUG.
! 1410: * [Bug 841] Obsolete the "dynamic" keyword and make deferred binding
! 1411: to local interfaces the default.
! 1412: Emit a warning if that keyword is used for configuration.
! 1413: * [Bug 959] Refclock on Windows not properly releasing recvbuffs.
! 1414: * [Bug 993] Fix memory leak when fetching system messages.
! 1415: * [Bug 987] Wake up the resolver thread/process when a new interface has
! 1416: become available.
! 1417: * Correctly apply negative-sawtooth for oncore 12 channel receiver.
! 1418: * Startup code for original LinuxPPS removed. LinuxPPS now conforms to
! 1419: the PPSAPI.
! 1420: * [Bug 1000] allow implicit receive buffer allocation for Windows.
! 1421: fixes startup for windows systems with many interfaces.
! 1422: reduces dropped packets on network bursts.
! 1423: additionally fix timer() starvation during high load.
! 1424: * [Bug 990] drop minimum time restriction for interface update interval.
! 1425: * [Bug 977] Fix mismatching #ifdefs for builds without IPv6.
! 1426: * Update the copyright year.
! 1427: * Build system cleanup (make autogen-generated files writable).
! 1428: * [Bug 957] Windows only: Let command line parameters from the Windows SCM GUI
! 1429: override the standard parameters from the ImagePath registry key.
! 1430: * Fixes for ntpdate:
! 1431: * [Bug 532] nptdate timeout is too long if several servers are supplied.
! 1432: * [Bug 698] timeBeginPeriod is called without timeEndPeriod in some NTP tools.
! 1433: * [Bug 857] ntpdate debug mode adjusts system clock when it shouldn't.
! 1434: * [Bug 908] ntpdate crashes sometimes.
! 1435: * [Bug 982] ntpdate(and ntptimeset) buffer overrun if HAVE_POLL_H isn't set
! 1436: (dup of 908).
! 1437: * [Bug 997] ntpdate buffer too small and unsafe.
! 1438: * ntpdate.c: Under Windows check whether NTP port in use under same conditions
! 1439: as under other OSs.
! 1440: * ntpdate.c: Fixed some typos and indents (tabs/spaces).
! 1441:
! 1442: (4.2.4p4) Released by Harlan Stenn <stenn@ntp.org>
! 1443:
! 1444: * [Bug 902] Fix problems with the -6 flag.
! 1445: * Updated include/copyright.def (owner and year).
! 1446: * [Bug 878] Avoid ntpdc use of refid value as unterminated string.
! 1447: * [Bug 881] Corrected display of pll offset on 64bit systems.
! 1448: * [Bug 886] Corrected sign handling on 64bit in ntpdc loopinfo command.
! 1449: * [Bug 889] avoid malloc() interrupted by SIGIO risk
! 1450: * ntpd/refclock_parse.c: cleanup shutdown while the file descriptor is still
! 1451: open.
! 1452: * [Bug 885] use emalloc() to get a message at the end of the memory
! 1453: unsigned types cannot be less than 0
! 1454: default_ai_family is a short
! 1455: lose trailing , from enum list
! 1456: clarify ntp_restrict.c for easier automated analysis
! 1457: * [Bug 884] don't access recv buffers after having them passed to the free
! 1458: list.
! 1459: * [Bug 882] allow loopback interfaces to share addresses with other
! 1460: interfaces.
! 1461:
! 1462: ---
! 1463: (4.2.4p3) Released by Harlan Stenn <stenn@ntp.org>
! 1464:
! 1465: * [Bug 863] unable to stop ntpd on Windows as the handle reference for events
! 1466: changed
! 1467:
! 1468: ---
! 1469: (4.2.4p2) Released by Harlan Stenn <stenn@ntp.org>
! 1470:
! 1471: * [Bug 854] Broadcast address was not correctly set for interface addresses
! 1472: * [Bug 829] reduce syslog noise, while there fix Enabled/Disable logging
! 1473: to reflect the actual configuration.
! 1474: * [Bug 795] Moved declaration of variable to top of function.
! 1475: * [Bug 789] Fix multicast client crypto authentication and make sure arriving
! 1476: multicast packets do not disturb the autokey dance.
! 1477: * [Bug 785] improve handling of multicast interfaces
! 1478: (multicast routers still need to run a multicast routing software/daemon)
! 1479: * ntpd/refclock_parse.c: cleanup shutdown while the file descriptor is still
! 1480: open.
! 1481: * [Bug 885] use emalloc() to get a message at the end of the memory
! 1482: unsigned types cannot be less than 0
! 1483: default_ai_family is a short
! 1484: lose trailing , from enum list
! 1485: * [Bug 884] don't access recv buffers after having them passed to the free list.
! 1486: * [Bug 882] allow loopback interfaces to share addresses with other interfaces.
! 1487: * [Bug 527] Don't write from source address length to wrong location
! 1488: * Upgraded autogen and libopts.
! 1489: * [Bug 811] ntpd should not read a .ntprc file.
! 1490:
! 1491: ---
! 1492: (4.2.4p1) (skipped)
! 1493:
! 1494: ---
! 1495: (4.2.4p0) Released by Harlan Stenn <stenn@ntp.org>
! 1496:
! 1497: * [Bug 793] Update Hans Lambermont's email address in ntpsweep.
! 1498: * [Bug 776] Remove unimplemented "rate" flag from ntpdate.
! 1499: * [Bug 586] Avoid lookups if AI_NUMERICHOST is set.
! 1500: * [Bug 770] Fix numeric parameters to ntp-keygen (Alain Guibert).
! 1501: * [Bug 768] Fix io_setbclient() error message.
! 1502: * [Bug 765] Use net_bind_service capability on linux.
! 1503: * [Bug 760] The background resolver must be aware of the 'dynamic' keyword.
! 1504: * [Bug 753] make union timestamp anonymous (Philip Prindeville).
! 1505: * confopt.html: move description for "dynamic" keyword into the right section.
! 1506: * pick the right type for the recv*() length argument.
! 1507:
! 1508: ---
! 1509: (4.2.4) Released by Harlan Stenn <stenn@ntp.org>
! 1510:
! 1511: * monopt.html fixes from Dave Mills.
! 1512: * [Bug 452] Do not report kernel PLL/FLL flips.
! 1513: * [Bug 746] Expert mouseCLOCK USB v2.0 support added.'
! 1514: * driver8.html updates.
! 1515: * [Bug 747] Drop <NOBR> tags from ntpdc.html.
! 1516: * sntp now uses the returned precision to control decimal places.
! 1517: * sntp -u will use an unprivileged port for its queries.
! 1518: * [Bug 741] "burst" doesn't work with !unfit peers.
! 1519: * [Bug 735] Fix a make/gmake VPATH issue on Solaris.
! 1520: * [Bug 739] ntpd -x should not take an argument.
! 1521: * [Bug 737] Some systems need help providing struct iovec.
! 1522: * [Bug 717] Fix libopts compile problem.
! 1523: * [Bug 728] parse documentation fixes.
! 1524: * [Bug 734] setsockopt(..., IP_MULTICAST_IF, ...) fails on 64-bit platforms.
! 1525: * [Bug 732] C-DEX JST2000 patch from Hideo Kuramatsu.
! 1526: * [Bug 721] check for __ss_family and __ss_len separately.
! 1527: * [Bug 666] ntpq opeers displays jitter rather than dispersion.
! 1528: * [Bug 718] Use the recommended type for the saddrlen arg to getsockname().
! 1529: * [Bug 715] Fix a multicast issue under Linux.
! 1530: * [Bug 690] Fix a Windows DNS lookup buffer overflow.
! 1531: * [Bug 670] Resolved a Windows issue with the dynamic interface rescan code.
! 1532: * K&R C support is being deprecated.
! 1533: * [Bug 714] ntpq -p should conflict with -i, not -c.
! 1534: * WWV refclock improvements from Dave Mills.
! 1535: * [Bug 708] Use thread affinity only for the clock interpolation thread.
! 1536: * [Bug 706] ntpd can be running several times in parallel.
! 1537: * [Bug 704] Documentation typos.
! 1538: * [Bug 701] coverity: NULL dereference in ntp_peer.c
! 1539: * [Bug 695] libopts does not protect against macro collisions.
! 1540: * [Bug 693] __adjtimex is independent of ntp_{adj,get}time.
! 1541: * [Bug 692] sys_limitrejected was not being incremented.
! 1542: * [Bug 691] restrictions() assumption not always valid.
! 1543: * [Bug 689] Deprecate HEATH GC-1001 II; the driver never worked.
! 1544: * [Bug 688] Fix documentation typos.
! 1545: * [Bug 686] Handle leap seconds better under Windows.
! 1546: * [Bug 685] Use the Windows multimedia timer.
! 1547: * [Bug 684] Only allow debug options if debugging is enabled.
! 1548: * [Bug 683] Use the right version string.
! 1549: * [Bug 680] Fix the generated version string on Windows.
! 1550: * [Bug 678] Use the correct size for control messages.
! 1551: * [Bug 677] Do not check uint_t in configure.ac.
! 1552: * [Bug 676] Use the right value for msg_namelen.
! 1553: * [Bug 675] Make sure ntpd builds without debugging.
! 1554: * [Bug 672] Fix cross-platform structure padding/size differences.
! 1555: * [Bug 660] New TIMESTAMP code fails tp build on Solaris Express.
! 1556: * [Bug 659] libopts does not build under Windows.
! 1557: * [Bug 658] HP-UX with cc needs -Wp,-H8166 in CFLAGS.
! 1558: * [Bug 656] ntpdate doesn't work with multicast address.
! 1559: * [Bug 638] STREAMS_TLI is deprecated - remove it.
! 1560: * [Bug 635] Fix tOptions definition.
! 1561: * [Bug 628] Fallback to ntp discipline not working for large offsets.
! 1562: * [Bug 622] Dynamic interface tracking for ntpd.
! 1563: * [Bug 603] Don't link with libelf if it's not needed.
! 1564: * [Bug 523] ntpd service under Windows does't shut down properly.
! 1565: * [Bug 500] sntp should always be built.
! 1566: * [Bug 479] Fix the -P option.
! 1567: * [Bug 421] Support the bc637PCI-U card.
! 1568: * [Bug 342] Deprecate broken TRAK refclock driver.
! 1569: * [Bug 340] Deprecate broken MSF EES refclock driver.
! 1570: * [Bug 153] Don't do DNS lookups on address masks.
! 1571: * [Bug 143] Fix interrupted system call on HP-UX.
! 1572: * [Bug 42] Distribution tarballs should be signed.
! 1573: * Support separate PPS devices for PARSE refclocks.
! 1574: * [Bug 637, 51?] Dynamic interface scanning can now be done.
! 1575: * Options processing now uses GNU AutoGen.
! 1576:
! 1577: ---
! 1578: (4.2.2p4) Released by Harlan Stenn <stenn@ntp.org>
! 1579:
! 1580: * [Bug 710] compat getnameinfo() has off-by-one error
! 1581: * [Bug 690] Buffer overflow in Windows when doing DNS Lookups
! 1582:
! 1583: ---
! 1584: (4.2.2p3) Released by Harlan Stenn <stenn@ntp.org>
! 1585:
! 1586: * Make the ChangeLog file cleaner and easier to read
! 1587: * [Bug 601] ntpq's decodeint uses an extra level of indirection
! 1588: * [Bug 657] Different OSes need different sized args for IP_MULTICAST_LOOP
! 1589: * release engineering/build changes
! 1590: * Documentation fixes
! 1591: * Get sntp working under AIX-5
! 1592:
! 1593: ---
! 1594: (4.2.2p2) (broken)
! 1595:
! 1596: * Get sntp working under AIX-5
! 1597:
! 1598: ---
! 1599: (4.2.2p1)
! 1600:
! 1601: * [Bug 661] Use environment variable to specify the base path to openssl.
! 1602: * Resolve an ambiguity in the copyright notice
! 1603: * Added some new documentation files
! 1604: * URL cleanup in the documentation
! 1605: * [Bug 657]: IP_MULTICAST_LOOP uses a u_char value/size
! 1606: * quiet gcc4 complaints
! 1607: * more Coverity fixes
! 1608: * [Bug 614] manage file descriptors better
! 1609: * [Bug 632] update kernel PPS offsets when PPS offset is re-configured
! 1610: * [Bug 637] Ignore UP in*addr_any interfaces
! 1611: * [Bug 633] Avoid writing files in srcdir
! 1612: * release engineering/build changes
! 1613:
! 1614: ---
! 1615: (4.2.2)
! 1616:
! 1617: * SNTP
! 1618: * Many bugfixes
! 1619: * Implements the current "goal state" of NTPv4
! 1620: * Autokey improvements
! 1621: * Much better IPv6 support
! 1622: * [Bug 360] ntpd loses handles with LAN connection disabled.
! 1623: * [Bug 239] Fix intermittent autokey failure with multicast clients.
! 1624: * Rewrite of the multicast code
! 1625: * New version numbering scheme
! 1626:
! 1627: ---
! 1628: (4.2.0)
! 1629:
! 1630: * More stuff than I have time to document
! 1631: * IPv6 support
! 1632: * Bugfixes
! 1633: * call-gap filtering
! 1634: * wwv and chu refclock improvements
! 1635: * OpenSSL integration
! 1636:
! 1637: ---
! 1638: (4.1.2)
! 1639:
! 1640: * clock state machine bugfix
! 1641: * Lose the source port check on incoming packets
! 1642: * (x)ntpdc compatibility patch
! 1643: * Virtual IP improvements
! 1644: * ntp_loopfilter fixes and improvements
! 1645: * ntpdc improvements
! 1646: * GOES refclock fix
! 1647: * JJY driver
! 1648: * Jupiter refclock fixes
! 1649: * Neoclock4X refclock fixes
! 1650: * AIX 5 port
! 1651: * bsdi port fixes
! 1652: * Cray unicos port upgrade
! 1653: * HP MPE/iX port
! 1654: * Win/NT port upgrade
! 1655: * Dynix PTX port fixes
! 1656: * Document conversion from CVS to BK
! 1657: * readline support for ntpq
! 1658:
! 1659: ---
! 1660: (4.1.0)
! 1661:
! 1662: * CERT problem fixed (99k23)
! 1663:
! 1664: * Huff-n-Puff filter
! 1665: * Preparation for OpenSSL support
! 1666: * Resolver changes/improvements are not backward compatible with mode 7
! 1667: requests (which are implementation-specific anyway)
! 1668: * leap second stuff
! 1669: * manycast should work now
! 1670: * ntp-genkeys does new good things.
! 1671: * scripts/ntp-close
! 1672: * PPS cleanup and improvements
! 1673: * readline support for ntpdc
! 1674: * Crypto/authentication rewrite
! 1675: * WINNT builds with MD5 by default
! 1676: * WINNT no longer requires Perl for building with Visual C++ 6.0
! 1677: * algorithmic improvements, bugfixes
! 1678: * Solaris dosynctodr info update
! 1679: * html/pic/* is *lots* smaller
! 1680: * New/updated drivers: Forum Graphic GPS, WWV/H, Heath GC-100 II, HOPF
! 1681: serial and PCI, ONCORE, ulink331
! 1682: * Rewrite of the audio drivers
! 1683:
! 1684: ---
! 1685: (4.0.99)
! 1686:
! 1687: * Driver updates: CHU, DCF, GPS/VME, Oncore, PCF, Ulink, WWVB, burst
! 1688: If you use the ONCORE driver with a HARDPPS kernel module,
! 1689: you *must* have a properly specified:
! 1690: pps <filename> [assert/clear] [hardpps]
! 1691: line in the /etc/ntp.conf file.
! 1692: * PARSE cleanup
! 1693: * PPS cleanup
! 1694: * ntpd, ntpq, ntpdate cleanup and fixes
! 1695: * NT port improvements
! 1696: * AIX, BSDI, DEC OSF, FreeBSD, NetBSD, Reliant, SCO, Solaris port improvements
! 1697:
! 1698: ---
! 1699: (4.0.98)
! 1700:
! 1701: * Solaris kernel FLL bug is fixed in 106541-07
! 1702: * Bug/lint cleanup
! 1703: * PPS cleanup
! 1704: * ReliantUNIX patches
! 1705: * NetInfo support
! 1706: * Ultralink driver
! 1707: * Trimble OEM Ace-II support
! 1708: * DCF77 power choices
! 1709: * Oncore improvements
! 1710:
! 1711: ---
! 1712: (4.0.97)
! 1713:
! 1714: * NT patches
! 1715: * AIX,SunOS,IRIX portability
! 1716: * NeXT portability
! 1717: * ntptimeset utility added
! 1718: * cygwin portability patches
! 1719:
! 1720: ---
! 1721: (4.0.96)
! 1722:
! 1723: * -lnsl, -lsocket, -lgen configuration patches
! 1724: * Y2K patches from AT&T
! 1725: * Linux portability cruft
! 1726:
! 1727: ---
! 1728: (4.0.95)
! 1729:
! 1730: * NT port cleanup/replacement
! 1731: * a few portability fixes
! 1732: * VARITEXT Parse clock added
! 1733:
! 1734: ---
! 1735: (4.0.94)
! 1736:
! 1737: * PPS updates (including ntp.config options)
! 1738: * Lose the old DES stuff in favor of the (optional) RSAREF stuff
! 1739: * html cleanup/updates
! 1740: * numerous drivers cleaned up
! 1741: * numerous portability patches and code cleanup
! 1742:
! 1743: ---
! 1744: (4.0.93)
! 1745:
! 1746: * Oncore refclock needs PPS or one of two ioctls.
! 1747: * Don't make ntptime under Linux. It doesn't compile for too many folks.
! 1748: * Autokey cleanup
! 1749: * ReliantUnix patches
! 1750: * html cleanup
! 1751: * tickadj cleanup
! 1752: * PARSE cleanup
! 1753: * IRIX -n32 cleanup
! 1754: * byte order cleanup
! 1755: * ntptrace improvements and patches
! 1756: * ntpdc improvements and patches
! 1757: * PPS cleanup
! 1758: * mx4200 cleanup
! 1759: * New clock state machine
! 1760: * SCO cleanup
! 1761: * Skip alias interfaces
! 1762:
! 1763: ---
! 1764: (4.0.92)
! 1765:
! 1766: * chronolog and dumbclock refclocks
! 1767: * SCO updates
! 1768: * Cleanup/bugfixes
! 1769: * Y2K patches
! 1770: * Updated palisade driver
! 1771: * Plug memory leak
! 1772: * wharton kernel clock
! 1773: * Oncore clock upgrades
! 1774: * NMEA clock improvements
! 1775: * PPS improvements
! 1776: * AIX portability patches
! 1777:
! 1778: ---
! 1779: (4.0.91)
! 1780:
! 1781: * New ONCORE driver
! 1782: * New MX4200 driver
! 1783: * Palisade improvements
! 1784: * config file bugfixes and problem reporting
! 1785: * autoconf upgrade and cleanup
! 1786: * HP-UX, IRIX lint cleanup
! 1787: * AIX portability patches
! 1788: * NT cleanup
! 1789:
! 1790: ---
! 1791: (4.0.90)
! 1792:
! 1793: * Nanoseconds
! 1794: * New palisade driver
! 1795: * New Oncore driver
! 1796:
! 1797: ---
! 1798: (4.0.73)
! 1799:
! 1800: * README.hackers added
! 1801: * PARSE driver is working again
! 1802: * Solaris 2.6 has nasty kernel bugs. DO NOT enable pll!
! 1803: * DES is out of the distribution.
! 1804:
! 1805: ---
! 1806: (4.0.72)
! 1807:
! 1808: * K&R C compiling should work again.
! 1809: * IRIG patches.
! 1810: * MX4200 driver patches.
! 1811: * Jupiter driver added.
! 1812: * Palisade driver added. Needs work (ANSI, ntoh/hton, sizeof double, ???)
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ChangeLog CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp