File:  [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / CommitLog-4.1.0
Revision 1.1.1.1 (vendor branch): download - view: text, annotated - select for diffs - revision graph
Tue May 29 12:08:37 2012 UTC (12 years ago) by misho
Branches: ntp, MAIN
CVS tags: v4_2_6p5p0, v4_2_6p5, HEAD
ntp 4.2.6p5

    1: 2001-08-01  Harlan Stenn  <stenn@whimsy.udel.edu>
    2: 
    3: 	* configure.in: 4.1.0
    4: 
    5: 2001-07-27  Harlan Stenn  <stenn@whimsy.udel.edu>
    6: 
    7: 	* ntpd/refclock_oncore.c (oncore_start): Set pps_enable=1, just
    8: 	like the atom driver does.
    9: 	From: reg@dwf.com
   10: 
   11: 	* ntpd/refclock_nmea.c (nmea_ppsapi): Set pps_enable=1, just like
   12: 	the atom driver does.
   13: 	From: Scott Allendorf <sca@newton.physics.uiowa.edu>
   14: 
   15: 	* ntpd/ntp_config.c (getconfig): CONF_CLOCK_PANIC was using the
   16: 	wrong config flag.
   17: 	From: <justin_forrester@hp.com>
   18: 
   19: 2001-07-10  Harlan Stenn  <stenn@whimsy.udel.edu>
   20: 
   21: 	* configure.in: 4.0.99m-rc3
   22: 
   23: 2001-07-06  Harlan Stenn  <stenn@whimsy.udel.edu>
   24: 
   25: 	* ntp_update: COPYRIGHT needs a touch.
   26: 	From: Mike Stump <mrs@kithrup.com>
   27: 
   28: 2001-07-04  Harlan Stenn  <stenn@whimsy.udel.edu>
   29: 
   30: 	* html/config.htm: Major cleanup.
   31: 	From: Martin Janzen <janzen@pixelmetrix.com>	
   32: 
   33: 	* configure.in (rt library check): Don't look for -lrt under
   34: 	Linux.  Under glibc-2.1.2 and -2.2.2 (at least), the POSIX-
   35: 	compatibility real-time library does strange things with threads
   36: 	as other processes and we're getting lots of complaints about it.
   37: 	Reported by: Juha Sarlin <juha@c3l.com>
   38: 	
   39: 2001-06-30  Harlan Stenn  <stenn@whimsy.udel.edu>
   40: 
   41: 	* html/driver35.htm: Update email address.
   42: 
   43: 2001-06-25  Harlan Stenn  <stenn@whimsy.udel.edu>
   44: 
   45: 	* ntpd/refclock_oncore.c (oncore_msg_BaEaHa): Fix wrong offset for
   46: 	rsm.bad_almanac
   47: 	From: Reynir Siik <reynir@royal.net>
   48: 
   49: 2001-06-12  Harlan Stenn  <stenn@whimsy.udel.edu>
   50: 
   51: 	* configure.in: 4.0.99m-rc2
   52: 
   53: 2001-06-10  Harlan Stenn  <stenn@whimsy.udel.edu>
   54: 
   55: 	* ntpd/ntp_config.c:
   56: 	* include/ntp_config.h: includefile config keyword support
   57: 	From: Dean Gibson <timekeeper@tcp-udp.net>
   58: 
   59: 2001-06-08  Harlan Stenn  <stenn@whimsy.udel.edu>
   60: 
   61: 	* configure.in: 4.0.99m-rc1b
   62: 
   63: 	* ntpd/refclock_true.c (true_debug): Bump some buffer sizes to
   64: 	reduce/eliminate chance of buffer overflow.  Use snprintf()
   65: 	instead of sprintf().  Do a better job of opening the debug file.
   66: 	* ntpd/ntp_control.c (ctl_getitem): Count overflow packets as bad
   67: 	and return a BADFMT.
   68: 	* ntpd/ntp_config.c (save_resolve): call fdopen() with the correct
   69: 	mode.
   70: 	From: Bela Lubkin <belal@sco.com>
   71: 
   72: 2001-06-03  Harlan Stenn  <stenn@whimsy.udel.edu>
   73: 
   74: 	* include/ntp.h (RES_ALLFLAGS): Add RES_DEMOBILIZE.
   75: 	From: Dean Gibson <timekeeper@tcp-udp.net>
   76: 
   77: 	* configure.in: 4.0.99m-rc1a
   78: 
   79: 2001-06-02  Harlan Stenn  <stenn@whimsy.udel.edu>
   80: 
   81: 	* ntpd/ntp_refclock.c (refclock_open): Add O_NOCTTY to the open()
   82: 	flags when opening a serial port.
   83: 	Reported by: joseph lang <tcnojl1@earthlink.net>
   84: 
   85: 2001-05-31  Harlan Stenn  <stenn@whimsy.udel.edu>
   86: 
   87: 	* html/notes.htm: Typo fix.
   88: 	From: John Stone <johns@ks.uiuc.edu>
   89: 
   90: 	* configure.in: 4.0.99m-rc1
   91: 
   92: 	* html/monopt.htm: Typo fix.
   93: 	* html/confopt.htm: Cruft removal.
   94: 	From: John Stone <johns@ks.uiuc.edu>
   95: 
   96: 2001-05-30  Harlan Stenn  <stenn@whimsy.udel.edu>
   97: 
   98: 	* README.cvs: More updates and cleanup.
   99: 
  100: 	* ntpd/ntp_loopfilter.c (loop_config): 
  101: 	Check against STA_NANO instead of (NTP_API > 3) to catch kernels
  102: 	that were rolled while the spec was evolving.
  103: 	From: John.Hay@icomtek.csir.co.za
  104: 
  105: 	* README.cvs: Note that we want to check out NTP into a clean
  106: 	subdir.
  107: 	Reported by jrd@cc.usu.edu (Joe Doupnik)
  108: 
  109: 2001-05-27  Harlan Stenn  <stenn@whimsy.udel.edu>
  110: 
  111: 	* configure.in: 4.0.99k40
  112: 
  113: 	* include/ntp_refclock.h: Median Filter (SAMPLE - macro) - change
  114: 	to use most recent MAXSTAGE entries when the filter overflows (ie
  115: 	driver poking say once per second with poll > MAXSTAGE) rather
  116: 	than blocking after MAXSTAGE entries (turf oldest rather than turf
  117: 	most recent).
  118: 	From: John Woolner <vk1et@tpg.com.au>
  119: 
  120: 	* ntpd/refclock_true.c:
  121: 	   a. Don't cream pp->a_lastcode when we get a <cr><lf> pair 
  122: 	   b. Fix up pp->leap handling to work correctly 
  123: 	   c. clear CEVNT_BADTIME etc warnings when we get good clock 
  124: 	CEVNT_NOMINAL. 
  125: 	From: John Woolner <vk1et@tpg.com.au>
  126: 
  127: 	* kernel/sys/pcl720.h:
  128: 	Add support for the XL clock to refclock_true.c 
  129: 	From: Paul A Vixie <vixie@mfnx.net> 
  130: 
  131: 	* ntpd/ntp_loopfilter.c (local_clock): One more attempt at
  132: 	"improving" the panic message.
  133: 
  134: 2001-05-26  Harlan Stenn  <stenn@whimsy.udel.edu>
  135: 
  136: 	* configure.in (ac_cv_func_ctty_for_f_setown): BSDI3 needs a ctty
  137: 	for F_SETOWN, too.
  138: 	From: Paul A Vixie <vixie@mfnx.net>
  139: 
  140: 2001-05-24  Harlan Stenn  <stenn@whimsy.udel.edu>
  141: 
  142: 	* html/ntpd.htm: Typo.
  143: 	From: John Stone <johns@ks.uiuc.edu>
  144: 
  145: 2001-05-23  Harlan Stenn  <stenn@whimsy.udel.edu>
  146: 
  147: 	* configure.in: 4.0.99k39
  148: 
  149: 	* ntpd/ntp_loopfilter.c (local_clock): huffpuff cleanup/improvements.
  150: 	(huffpuff): Cleanup/improvements.
  151: 	(loop_config): huffpuff initialization cleanup/improvements.
  152: 	From: Dave Mills, Terje, Mark, and John?
  153: 
  154: 2001-05-22  Harlan Stenn  <stenn@whimsy.udel.edu>
  155: 
  156: 	* html/release.htm:
  157: 	* html/ntpd.htm:
  158: 	* html/miscopt.htm:
  159: 	From: Dave Mills: Updates.
  160: 
  161: 2001-05-21  Harlan Stenn  <stenn@whimsy.udel.edu>
  162: 
  163: 	* configure.in: 4.0.99k38
  164: 
  165: 	* ntpd/ntp_proto.c (clock_filter): Huff-n-Puff and Popcorn
  166: 	improvements.
  167: 	* ntpd/ntp_loopfilter.c (local_clock): Debug cleanup
  168: 	From: Dave Mills.
  169: 
  170: 	* include/ntp_syscall.h (ntp_gettime): Updated patch from Ulrich.
  171: 	My original attempt was not backwards compatible.
  172: 
  173: 2001-05-17  Harlan Stenn  <stenn@whimsy.udel.edu>
  174: 
  175: 	* include/ntp_syscall.h (ntp_gettime): Fill in the tai member.
  176: 	From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
  177: 
  178: 	* configure.in: 4.0.99k37
  179: 
  180: 	* ntpd/ntp_proto.c (clock_filter): Lose "off", xtemp and ytemp,
  181: 	and some obsoleted calculations.  Set the peer->offset and
  182: 	peer->delay from the filter stages.
  183: 
  184: 	* ntpd/ntp_loopfilter.c: Comment/document improvements.
  185: 	(local_clock): correct the offset by one-half the difference
  186: 	between the sample delay and minimum delay.  Lose "mu" from the
  187: 	debug message.
  188: 	From: Dave Mills.
  189: 
  190: 2001-05-15  Harlan Stenn  <stenn@whimsy.udel.edu>
  191: 
  192: 	* configure.in: 4.0.99k36
  193: 
  194: 	* ntpd/ntp_loopfilter.c: Huff-n-puff cleanup
  195: 	From: Dave Mills.
  196: 
  197: 2001-05-14  Harlan Stenn  <stenn@whimsy.udel.edu>
  198: 
  199: 	* configure.in: 4.0.99k35
  200: 
  201: 	* ntpd/refclock_atom.c (atom_ppsapi): set pps_enable=1 if
  202: 	enb_hardpps.
  203: 	* ntpd/ntp_timer.c: huffpuff support.
  204: 	(init_timer): huffpuff support.
  205: 	(timer): huffpuff support.
  206: 	* ntpd/ntp_proto.c (init_proto): Initialize pps_enable to 0, not 1.
  207: 	* ntpd/ntp_loopfilter.c (CLOCK_HUFFPUFF): Added.
  208: 	Add huff-n-puff filter variables.
  209: 	(local_clock): Lose "pps sync enabled" log noise.
  210: 	(huffpuff): Added.
  211: 	(loop_config): LOOP_MINPOLL and LOOP_ALLAN were missing the
  212: 	trailing break; add LOOP_HUFFPUFF.
  213: 	* ntpd/ntp_config.c: tinker huffpuff added.
  214: 	(getconfig): CONF_CLOCK_HUFFPUFF support.
  215: 	* include/ntpd.h: huffpuff() declaration.
  216: 	* include/ntp_config.h (CONF_CLOCK_HUFFPUFF): Added.
  217: 	* include/ntp.h (HUFFPUFF): Added.
  218: 	(LOOP_HUFFPUFF): Added.
  219: 	From: Dave Mills.
  220: 
  221: 2001-05-11  Harlan Stenn  <stenn@whimsy.udel.edu>
  222: 
  223: 	* html/driver20.htm: Reality check.
  224: 	* ntpd/refclock_nmea.c: Comment cleanup
  225: 	From: John Woolner <vk1et@tpg.com.au>
  226: 
  227: 	* html/release.htm: Cleanup (at least).
  228: 	* html/refclock.htm: Cleanup (at least).
  229: 	* html/kern.htm: Cleanup (at least).
  230: 	* html/index.htm: Cleanup (at least).
  231: 	* html/extern.htm: Cleanup (at least).
  232: 	* html/driver1.htm: Cleanup (at least).
  233: 	* html/debug.htm: Cleanp (at least).
  234: 	* html/accopt.htm: KoD documentation update.
  235: 	From: Dave Mills.
  236: 
  237: 	* configure.in: 4.0.99k34
  238: 
  239: 	* ntpd/ntp_util.c (record_loop_stats): values are now passed in.
  240: 	* ntpd/ntp_loopfilter.c (local_clock): pass the values to
  241: 	record_loop_stats().
  242: 	* include/ntpd.h: Pass the parameters in to record_loop_stats().
  243: 	With the discipline loop opened (disable ntp) the local clock
  244: 	updates were not being sent to loopstats. That now is.
  245: 	From: Dave Mills.	
  246: 
  247: 2001-05-10  Harlan Stenn  <stenn@whimsy.udel.edu>
  248: 
  249: 	* configure.in: 4.0.99k33
  250: 
  251: 	* ntpd/ntp_proto.c (receive): Validate the source port.  Lose
  252: 	NTPv1 support.
  253: 	* ntpd/ntp_loopfilter.c (local_clock): Sanity check sys_poll
  254: 	earlier instead of later.
  255: 	From: Dave Mills.
  256: 
  257: 	* ntpd/refclock_oncore.c (oncore_msg_any): We don't always have
  258: 	GETTIMEOFDAY().
  259: 
  260: 2001-05-09  Harlan Stenn  <stenn@whimsy.udel.edu>
  261: 
  262: 	* ntpd/refclock_shm.c (shm_poll): Apply JAN_1970 correction after
  263: 	calling TVTOTS(), just like everybody else does.
  264: 	From: David Malone <dwmalone@maths.tcd.ie>
  265: 
  266: 	* ntpd/refclock_ulink.c: fixed 33x quality flag, added more
  267: 	debugging stuff, updated 33x time code explanation.
  268: 	From: s.l.smith (via j.c.lang).
  269: 
  270: 2001-05-08  Harlan Stenn  <stenn@whimsy.udel.edu>
  271: 
  272: 	* configure.in: 4.0.99k32
  273: 
  274: 	* ntpd/ntp_loopfilter.c: rstclock now takes a 3rd argument, the
  275: 	last offset.
  276: 	(init_loopfilter): Use it.
  277: 	(local_clock): Use it.  Clean up the code.
  278: 	(loop_config): Use it.
  279: 	(rstclock): Implement it.  Clean up the code.
  280: 	From Dave Mills.
  281: 
  282: 2001-05-06  Harlan Stenn  <stenn@whimsy.udel.edu>
  283: 
  284: 	* configure.in: 4.0.99k31
  285: 
  286: 	* ntpdc/ntpdc_ops.c (sysstats): That's 'bad packet format'
  287: 	(instead of '... length'), and 'packets rejected' (instead of
  288: 	'limitation rejects'.
  289: 	* ntpd/ntp_proto.c (receive): PUBKEY fixes.  Move KoD stuff to
  290: 	process_packet().
  291: 	(process_packet):  Move KoD stuff here... 
  292: 	(peer_clear): Unspec the stratum, too.
  293: 	(clock_filter): Don't update peer->epoch here.  Fix the filter
  294: 	test when checking the epoch.
  295: 	(fast_xmit): Send back STRATUM_UNSPEC on a KoD packet.
  296: 	(init_proto): Initialize sys_jitter.
  297: 
  298: 	* ntpd/ntp_loopfilter.c: rstclock() takes 2 parameters now.
  299: 	(init_loopfilter): Use it...
  300: 	(local_clock): Ditto, and change the "mu" calculation.  Improve
  301: 	the jitter test in S_SYNC.  Use peer->epoch (not current_time) to
  302: 	update the last_time.  Update debug info.
  303: 	(rstclock): 2nd arg - the epoch to use.  Use it.
  304: 	(loop_config): update call to rstclock.
  305: 	From: Dave Mills.
  306: 
  307: 2001-05-01  Harlan Stenn  <stenn@whimsy.udel.edu>
  308: 
  309: 	* ports/winnt/ntpd/ntpd.dsp: Add cmd_args.c
  310: 	From: Wink Saville <wink@saville.com>
  311: 
  312: 2001-04-29  Harlan Stenn  <stenn@whimsy.udel.edu>
  313: 
  314: 	* ntpq/ntpq.c (tstflags): 11 now.
  315: 	From: John Cochran <jdc@fiawol.org>
  316: 
  317: 	* ntpd/ntp_proto.c (receive): KoD updates.  Improve the comments.
  318: 	Lose the AM_PROCPKT restrictions test.
  319: 	(peer_xmit): Check/report on no encryption key in packet.
  320: 	(fast_xmit): Use peer_xmit's new packet length check code.
  321: 	From  Dave Mills.
  322: 
  323: 2001-04-28  Harlan Stenn  <stenn@whimsy.udel.edu>
  324: 
  325: 	* configure.in: 4.0.99k30
  326: 
  327: 2001-04-27  Harlan Stenn  <stenn@whimsy.udel.edu>
  328: 
  329: 	* ntpdc/ntpdc_ops.c: Added "kod", lost "demobilize".
  330: 	* ntpd/ntp_config.c: Added "kod" keyword.  Lose "demobilize" keyword.
  331: 	* html/release.htm: Updated.
  332: 	* html/accopt.htm: Updated.
  333: 	From: Dave Mills.
  334: 
  335: 	* ntpq/ntpq.c: Reorder and add some TEST flag bits.
  336: 	* ntpd/ntp_proto.c (transmit): Also bail if access denied.
  337: 	(receive): Lose RES_DEMOBILIZE and (some?) RES_DONTSERVE and
  338: 	RES_LIMITIED stuff.  Update Kiss-Of-Death (KoD) docs.
  339: 	Call fast_xmit with new 3rd parameter (restrict_mask).
  340: 	Before checking for an authentic packet, check the restrict_mask
  341: 	for RES_{DONTSERVE,LIMITED,NOPEER}.
  342: 	Check restrictions in AM_PROCPKT case.
  343: 	(peer_clear): Don't lose the stratum if the peer->flags don't
  344: 	indicate FLAG_REFCLOCK.
  345: 	(fast_xmit): Take restrict mask as a new argument, and handle
  346: 	KoD.  Reorder some code.
  347: 	From: Dave Mills.
  348: 
  349: 2001-04-26  Harlan Stenn  <stenn@whimsy.udel.edu>
  350: 
  351: 	* ntpdc/ntpdc_ops.c: restrict/unrestrict support for version and
  352: 	demobilize.  Implement demobilze.
  353: 	* ntpd/ntp_proto.c (receive): Improve version testing, including
  354: 	RES_DEMOBILIZE support.
  355: 	(fast_xmit): Patches to kiss-of-death packet.
  356: 	* ntpd/ntp_loopfilter.c (local_clock): S_SYNC case now also checks
  357: 	abs(clock_offset) against CLOCK_PGATE*sys_jitter.
  358: 	* ntpd/ntp_config.c: CONF_RES_DEMOBILIZE/demobilize support.
  359: 	* include/ntp_config.h (CONF_RES_DEMOBILIZE): Added.
  360: 	* include/ntp.h (RES_DEMOBILIZE): Added.
  361: 	From Dave Mills.
  362: 
  363: 2001-04-25  Harlan Stenn  <stenn@whimsy.udel.edu>
  364: 
  365: 	* html/accopt.htm: Document the "version" parameter
  366: 	From Dave Mills.
  367: 
  368: 	* ntpd/ntp_proto.c (fast_xmit): Implement DENY mode.
  369: 	From Dave Mills.
  370: 
  371: 	* ntpd/ntp_config.c: Add the "allan" tinker variable.
  372: 	From: Juha Sarlin <juha@c3l.tyreso.se>
  373: 
  374: 	* ntpd/refclock_hopfpci.c (hopfpci_start): Lose the "correct_any"
  375: 	stuff - it's both obsolete and wrong.
  376: 
  377: 	* ntpd/ntp_proto.c (receive): Keep track of packet versions.
  378: 	Implement RES_LIMITED.
  379: 	* include/ntp_config.h (CONF_RES_LIMITED): 
  380: 	* include/ntp.h (RES_LIMITED): Leave the bits in the original
  381: 	order.
  382: 	From Dave Mills.
  383: 
  384: 	* util/timetrim.c:
  385: 	* util/Makefile.am:
  386: 	* ntpdc/ntpdc_ops.c:
  387: 	* ntpd/refclock_nmea.c:
  388: 	* libntp/snprintf.c:
  389: 	* configure.in:
  390: 	* configure:
  391: 	* config.h.in:
  392: 	* aclocal.m4:
  393: 	* acconfig.h:
  394: 	Lint cleanup from: Marc Brett <mbrett@rgs0.london.waii.com>
  395: 
  396: 	* ntpd/ntp_config.c: Add "version" support.
  397: 	(getconfig): version support.
  398: 	* include/ntp_config.h (CONF_RES_VERSION): Added.
  399: 	* include/ntp.h (RES_VERSION): Added.
  400: 	From: Dave Mills.
  401: 
  402: 	* include/ntp_machine.h (ifreq): WinNT cleanup
  403: 
  404: 2001-04-23  Harlan Stenn  <stenn@whimsy.udel.edu>
  405: 
  406: 	* configure.in: 4.0.99k29
  407: 
  408: 	* html/miscopt.htm: Document the "allan" tinker variable.
  409: 	* ntpd/ntp_proto.c (clock_filter): Update comments.  Lose etemp;
  410: 	we now use allan_xpt for this.
  411: 	* ntpd/ntp_loopfilter.c: Added allan_xpt as a tinker variable.
  412: 	Reorganize variables and improve comments.
  413: 	(local_clock): Improve comments, use (new) allan_xpt instead of
  414: 	CLOCK_ALLAN.  Fix test in S_SYNC state.  Update debug info.
  415: 	(rstclock): No longer force allan_xpt to CVLOCK_ALLAN in S_FREQ,
  416: 	S_SYNC, or default case.
  417: 	(loop_config): Document dangerous tinker variables, and add
  418: 	LOOP_ALLAN to the list.
  419: 	* include/ntp_config.h (CONF_CLOCK_ALLAN): Added.
  420: 	* include/ntp.h (LOOP_ALLAN): Added.
  421: 	Allan intercept fixes from Dave Mills.
  422: 
  423: 	* scripts/mkver.in: Use the C locale so  the dates come out in a
  424: 	consistent format.
  425: 	From: ASANO Naoyuki <n_asano@imjp.co.jp>
  426: 
  427: 	* build: Run "config.status" before the "make" because it probably
  428: 	saves time and trouble.  Probably...
  429: 
  430: 	* flock-build: Try building sequentially.
  431: 
  432: 2001-04-22  Harlan Stenn  <stenn@whimsy.udel.edu>
  433: 
  434: 	* configure.in (ac_cv_make_tickadj): Fix it right...
  435: 
  436: 	* util/ntp-genkeys.c: extern config_netinfo, too.
  437: 
  438: 	* util/hist.c:
  439: 	* ntptrace/ntptrace.c:
  440: 	* ntpq/ntpq.c:
  441: 	* ntpdc/ntpdc.c:
  442: 	* ntpdate/ntptimeset.c:
  443: 	* ntpdate/ntpdate.c:
  444: 	* ntpd/refclock_parse.c:
  445: 	* ntpd/refclock_msfees.c:
  446: 	* ntpd/refclock_jupiter.c:
  447: 	* ntpd/ntp_refclock.c:
  448: 	* ntpd/ntp_io.c:
  449: 	* libparse/clk_wharton.c:
  450: 	* libparse/clk_varitext.c:
  451: 	* libparse/clk_trimtaip.c:
  452: 	* libparse/clk_schmid.c:
  453: 	* libparse/clk_rcc8000.c:
  454: 	* libparse/clk_rawdcf.c:
  455: 	* libparse/clk_meinberg.c:
  456: 	* libparse/clk_hopf6021.c:
  457: 	* libparse/clk_dcf7000.c:
  458: 	* libparse/clk_computime.c:
  459: 	Lint.  From: Simon Burge <simonb@wasabisystems.com>
  460: 
  461: 2001-04-21  Harlan Stenn  <stenn@whimsy.udel.edu>
  462: 
  463: 	* ntpd/refclock_nmea.c (nmea_receive): Fixes.
  464: 	From: John Woolner <vk1et@tpg.com.au>
  465: 
  466: 	* util/ntp-genkeys.c: Declare check_netinfo, don't define it.
  467: 	From: Jack Bryans <jbryans@csulb.edu>
  468: 
  469: 	* configure.in (RSASRCS): rsaref2 needs digit.h (I thought I fixed
  470: 	this already).
  471: 	
  472: 	* configure.in (CFLAGS): Disable -Wconversion, enable
  473: 	-Wmissing-prototypes, and allow for -Werror.
  474: 	From: Simon Burge <simonb@wasabisystems.com>
  475: 
  476: 	* util/ntp-genkeys.c (main): Reset the standard mask so the
  477: 	symlinks are created with the standard mask.
  478: 
  479: 	* configure.in: 4.0.99k28
  480: 
  481: 	* ntpd/ntpd.c (ntpdmain): Use mode_t for umask value.
  482: 
  483: 	* util/ntp-genkeys.c: Create files with the right umask.
  484: 
  485: 	* util/ntp-genkeys.c: config_file should be declared, not defined.
  486: 	* ntpd/refclock_mx4200.c (mx4200_pps): debug cleanup.
  487: 	* ntpd/refclock_hopfser.c: If we're not using it, provide the _bs.
  488: 	* ntpd/refclock_heath.c (heath_receive): Add missing "break"
  489: 	statements.
  490: 	* ntpd/ntp_proto.c: Lose extra definition of mode_ntpdate.
  491: 	* librsaref/Makefile.am (nodist_librsaref_a_SOURCES): Put RSASRCS
  492: 	on the same line as rsaref.h to improve portability.
  493: 	* libntp/msyslog.c: Lint cleanup.
  494: 	From: Marc.Brett@westerngeco.com
  495: 
  496: 	* util/ntp-genkeys.c:
  497: 	* ntpdate/ntpdate.c:
  498: 	* ntpd/ntp_config.c: Netinfo header reorder.
  499: 	From: Jack Bryans <jbryans@csulb.edu>
  500: 
  501: 	* configure.in: timespec can be found by looking in goofy places
  502: 	under SunOS.
  503: 
  504: 2001-04-20  Harlan Stenn  <stenn@whimsy.udel.edu>
  505: 
  506: 	* ntpd/refclock_nmea.c:  PPSAPI cleanup, default to RMC sentences,
  507: 	handle milliseconds, multiple sentences, other good stuff.
  508: 	From: John Woolner <vk1et@tpg.com.au>, Marc.Brett@westerngeco.com,
  509: 	John.Hay@icomtek.csir.co.za
  510: 
  511: 	* ntpd/ntp_proto.c (receive): In the AM_NEWBCL case, return in all
  512: 	cases at the end.
  513: 	* ntpd/ntp_peer.c (newpeer): Check cast_flags against MDF_BCLNT,
  514: 	not against MDF_BCAST.
  515: 	* ntpd/ntp_loopfilter.c (local_clock): Lose debug info.
  516: 	* ntpd/ntp_crypto.c (crypto_recv): Bugfix.
  517: 	From: Dave Mills.
  518: 
  519: 	* configure.in: 4.0.99k27
  520: 
  521: 	* ntpd/ntp_loopfilter.c (local_clock): Check clock_panic > 0.
  522: 	Check clock_max > 0.
  523: 	* html/ntpd.htm: Cleanup.
  524: 	* html/miscopt.htm: Cleanup.
  525: 	* html/confopt.htm: Cleanup minpoll documentation.
  526: 	From: Dave Mills.
  527: 
  528: 2001-04-19  Harlan Stenn  <stenn@whimsy.udel.edu>
  529: 
  530: 	* ntpd/cmd_args.c (getstartup): check_netinfo needs an extern
  531: 	declaration.
  532: 	Reported by: Jack Bryans <jbryans@csulb.edu>
  533: 
  534: 	* configure.in (ac_cv_make_timetrim): Added.
  535: 	* util/Makefile.am (bin_PROGRAMS): MAKE_TIMETRIM
  536: 	Requested by: Jack Bryans <jbryans@csulb.edu>
  537: 
  538: 	* configure.in: 4.0.99k26
  539: 
  540: 	* util/ntp-genkeys.c:
  541: 	* ntpd/refclock_oncore.c:
  542: 	* ntpd/ntp_peer.c:
  543: 	* libntp/msyslog.c:
  544: 	* libntp/audio.c:
  545: 	Lint cleanup.
  546: 	From: Simon Burge <simonb@wasabisystems.com>
  547: 
  548: 	* ntpd/ntp_loopfilter.c (local_clock): debug message improvements
  549: 	from Dave Mills.
  550: 
  551: 	* libntp/emalloc.c (emalloc): Tell people we are exiting if we log
  552: 	an out-of-memory condition.
  553: 
  554: 	* util/ntp-genkeys.c (main): Don't allow '#' in a generated MD5
  555: 	key.  Reported by: Dave Tyson <Dave.Tyson@liverpool.ac.uk>
  556: 
  557: 2001-04-18  Harlan Stenn  <stenn@whimsy.udel.edu>
  558: 
  559: 	* ntpd/ntp_proto.c (clock_update): minpoll cleanup.
  560: 	(clock_select): minpoll cleanup.
  561: 	(clock_filter): Bugfixes from Mark Martinec <Mark.Martinec@ijs.si>
  562: 	* ntpd/ntp_loopfilter.c (rstclock): minpoll cleanup.  Debug cleanup.
  563: 	* ntpd/ntp_config.c (getconfig): Initialize/bounds check minpoll
  564: 	using NTP_MINDPOLL insted of sys_minpoll.
  565: 	From: Dave Mills.
  566: 
  567: 2001-04-17  Harlan Stenn  <stenn@whimsy.udel.edu>
  568: 
  569: 	* libntp/msyslog.c:
  570: 	* ElectricFence/page.c (stringErrorReport): Follow Rainer's lead
  571: 	and use strerror().
  572: 
  573: 	* ntpd/refclock_shm.c (shm_start): Always use strerror. 
  574: 	* libntp/msyslog.c (msyslog): Use strerror if present. 
  575: 	From: Rainer Orth  <ro@TechFak.Uni-Bielefeld.
  576: 	
  577: 	* ntpd/ntp_config.c (getconfig): Read stratum fudge value into 
  578: 	long variable.
  579: 	From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE> 
  580: 
  581: 	* libparse/parsesolaris.c (rdchar): Cast ~0 to unsigned long. 
  582: 	* libntp/buftvtots.c (buftvtots): Allow for 8-byte tv_sec, tv_usec 
  583: 	in struct timeval.
  584: 	From: Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
  585: 
  586: 2001-04-16  Harlan Stenn  <stenn@whimsy.udel.edu>
  587: 
  588: 	* ntpd/ntp_config.c (getconfig): move "tinker" so it's generally
  589: 	available.
  590: 
  591: 2001-04-15  Harlan Stenn  <stenn@whimsy.udel.edu>
  592: 
  593: 	* configure.in: Look for getclock().
  594: 
  595: 	* ntpd/ntp_config.c (getconfig): Squawk if provided minpoll or
  596: 	maxpoll values are out of range.
  597: 
  598: 	* ntpd/ntp_proto.c (poll_update): Some operations can only be done
  599: 	if we're compiling with some REFCLOCKs.
  600: 	From Dave Mills.
  601: 
  602: 	* configure.in (RSASRCS): Added.
  603: 	* librsaref/Makefile.am (nodist_librsaref_a_SOURCES): Use RSASRCS.
  604: 
  605: 	* configure.in: Limit the DECL_HSTRERROR_0 to aix4.3.*.  RSN, we
  606: 	could also limit it to xlc...
  607: 
  608: 	* configure.in: 4.0.99k25
  609: 
  610: 	* html/leap.htm: Added.
  611: 	* html/index.htm: Update.
  612: 	* html/driver7.htm: Update.
  613: 	* html/driver6.htm: Update.
  614: 	* html/driver36.htm: Update.
  615: 	* html/audio.htm: Update.
  616: 	* html/y2k.htm: Removed.
  617: 	From Dave Mills.
  618: 
  619: 2001-04-14  Harlan Stenn  <stenn@whimsy.udel.edu>
  620: 
  621: 	* acconfig.h: Lose extra declarations of PACKAGE and VERSION.
  622: 
  623: 	* acconfig.h: 
  624: 	* configure.in:
  625: 	* include/l_stdlib.h: DECL_HSTRERROR_0 needed for xlc under AIX 4.3.2.
  626: 	Reported by: Harald Barth <haba@pdc.kth.se>
  627: 
  628: 	* ntpd/ntp_proto.c (proto_config): cal_enable (PROTO_CAL) is
  629: 	invalid if no refclocks are present.
  630: 	From: Frodo Looijaard <frodol@dds.nl>
  631: 
  632: 	* README.cvs: On some systems, the -C option fails.
  633: 
  634: 	* ntpd/refclock_nmea.c:
  635: 	* ntpd/ntp_refclock.c:
  636: 	* html/driver20.htm:
  637: 	PPSAPI patches for NMEA driver.
  638: 	From: John.Hay@icomtek.csir.co.za
  639: 
  640:         * README.rsa: Describe RSAEuro support, provide alternate rsa.c 
  641: 	patch. 
  642: 	* configure.in: Check for rsaeuro1, RSAOBJS, RSADIR respectively. 
  643: 	* html/build.htm: Hint at rsaeuro1 directory. 
  644: 	* include/global.h (BYTE): Define. 
  645: 	* librsaref/Makefile.am (nodist_librsaref_a_SOURCES): Removed rsaref2 
  646: 	specific sources. 
  647: 	(librsaref_a_LIBADD): Add appropriate objects. 
  648: 	(librsaref_a_DEPENDENCIES): Work around automake limitation. 
  649: 	(stamp-rsaref): Use RSADIR. 
  650: 	* scripts/README: Document ntp-close. 
  651: 	* scripts/Makefile.am (EXTRA_DIST): Distribute it. 
  652: 	* Makefile.am (DISTCLEANFILES): Remove .warning.
  653: 	* librsaref/Makefile.am (DISTCLEANFILES): Remove copied/touched
  654: 	librsaref sources, stamp-rsaref.
  655: 	* ntpdate/Makefile.am (DISTCLEANFILES): Remove version.c.
  656: 	* ntpq/Makefile.am (DISTCLEANFILES): Likewise.
  657: 	* parseutil/Makefile.am (DISTCLEANFILES): Remove $(EXTRA_PROGRAMS).
  658: 	Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
  659: 
  660: 	* ntpd/ntp_control.c: Header cleanup
  661: 
  662: 2001-04-13  Harlan Stenn  <stenn@whimsy.udel.edu>
  663: 
  664: 	* configure.in: Properly align --help output.
  665: 	Explain ElectricFence.
  666: 	From: Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
  667: 
  668: 	* ntpd/ntp_loopfilter.c (local_clock): Lose debugging statements.
  669: 	* ntpd/ntp_proto.c (clock_filter): Rewrite.
  670: 	From: Dave Mills
  671: 
  672: 	* ntpd/ntp_control.c (ctl_getitem): msyslog() possible buffer
  673: 	overflow exploit.
  674: 
  675: 	* configure.in: 4.0.99k24
  676: 
  677: 	* html/pic/radio2.jpg:
  678: 	* html/release.htm:
  679: 	* html/refclock.htm:
  680: 	* html/pps.htm:
  681: 	* html/ntpd.htm:
  682: 	* html/miscopt.htm:
  683: 	* html/driver22.htm:
  684: 	* html/confopt.htm:
  685: 	Updated documentation from Dave Mills.
  686: 
  687: 	* util/ntp-genkeys.c: sys_minpoll.
  688: 	* ntpd/refclock_atom.c: Comment additions.
  689: 	* ntpd/ntp_proto.c: mode_ntpdate and peer_ntpdate added.
  690: 	(transmit): We want 3, not 2, consecutive polls.  hpoll logic
  691: 	cleanup.  mode_ntpdate changes.
  692: 	(receive): When setting up a newpeer, use our sys_minpoll, not the
  693: 	peer->ppoll.
  694: 	(clock_update): sys_minpoll changes.  Reorder some case 1 code.
  695: 	Don't exit in case 2.
  696: 	(poll_update): hpoll cleanup.
  697: 	(peer_clear): u_rand.  Use u_rand to randomize the initial poll.
  698: 	* ntpd/ntp_peer.c (newpeer): Bump peer_ntpdate if we're in
  699: 	mode_ntpdate.
  700: 	* ntpd/ntp_loopfilter.c: Initialize sys_poll and sys_minpoll to
  701: 	NTP_MINDPOLL.
  702: 	(local_clock): Clean up some debug/info messages.
  703: 	(rstclock): Use sys_minpoll.
  704: 	(loop_config): KERNEL_PLL sanity checks.  LOOP_MINPOLL support.
  705: 	* ntpd/ntp_crypto.c (crypto_recv): Turn off FLAG_AUTOKEY when we
  706: 	turn off TEST10.
  707: 	* ntpd/ntp_control.c (ctl_getitem): Buffer overflow check.  Clean
  708: 	up some loop logic.
  709: 	* ntpd/ntp_config.c: Added "tinker" and "minpoll".  Use
  710: 	sys_minpoll now, instead of old manifest constant.
  711: 	(save_resolve): Print keyid using decimal, not hex.  From Lars-Owe
  712: 	Ivarsson <larsowe@paradisaea.its.uu.se>
  713: 	* include/ntpd.h: Added peer_ntpdate and sys_minpoll.
  714: 	* include/ntp_config.h (CONF_CLOCK_MINPOLL): Added.
  715: 	* include/ntp.h: keyid cleanup.  LOOP_* cleanup.
  716: 	From Dave Mills.
  717: 
  718: 2001-04-03  Harlan Stenn  <stenn@whimsy.udel.edu>
  719: 
  720: 	* ntpd/ntp_proto.c (clock_filter): Swell stuff.
  721: 	From: Mark Martinec <Mark.Martinec@ijs.si>
  722: 
  723: 	* ports/winnt/ntpd/ntpd.dsp:
  724: 	* ports/winnt/ntpd/hopf_PCI_io.c:
  725: 	* ports/winnt/include/hopf_PCI_io.h:
  726: 	* ports/winnt/include/config.h:
  727: 	* ntpd/refclock_hopfser.c:
  728: 	* ntpd/refclock_hopfpci.c:
  729: 	* ntpd/refclock_conf.c:
  730: 	* ntpd/ntp_control.c:
  731: 	* ntpd/Makefile.am:
  732: 	* libntp/clocktypes.c:
  733: 	* include/ntp.h:
  734: 	* include/hopf6039.h:
  735: 	* include/Makefile.in:
  736: 	* include/Makefile.am:
  737: 	* html/pic/fg6039.jpg:
  738: 	* html/refclock.htm:
  739: 	* html/driver39.htm:
  740: 	* html/driver38.htm:
  741: 	* html/copyright.htm:
  742: 	Updated Oncore dudes.
  743: 
  744: 	* configure.in:
  745: 	HOPF drivers and documentation.
  746: 	From: Bernd Altmeier <altmeier@atlsoft.de> (with some light
  747: 	hacking from Harlan to clean up indentation and lose the // comments)
  748: 
  749: 	* ntpd/refclock_oncore.c:
  750: 	* ntpd/refclock_conf.c: Make it go.
  751: 	From: Reg Clemens <reg@dwf.com>
  752: 
  753: 	* configure.in (openssl): Publish and default to RSAREF; hide
  754: 	openssl, and only use it if explicitly requested (at least until
  755: 	we work with it).
  756: 
  757: 2001-04-02  Harlan Stenn  <stenn@whimsy.udel.edu>
  758: 
  759: 	* html/y2k.htm:
  760: 	* html/tickadj.htm:
  761: 	* html/release.htm:
  762: 	* html/refclock.htm:
  763: 	* html/quick.htm:
  764: 	* html/pps.htm:
  765: 	* html/ntptrace.htm:
  766: 	* html/ntptime.htm:
  767: 	* html/ntpq.htm:
  768: 	* html/ntpdc.htm:
  769: 	* html/ntpdate.htm:
  770: 	* html/ntpd.htm:
  771: 	* html/miscopt.htm:
  772: 	* html/index.htm:
  773: 	* html/genkeys.htm:
  774: 	* html/exec.htm:
  775: 	* html/driver7.htm:
  776: 	* html/driver22.htm:
  777: 	* html/copyright.htm:
  778: 	* html/confopt.htm:
  779: 	* html/build.htm:
  780: 	* html/authopt.htm:
  781: 	* html/assoc.htm:
  782: 	Updates from Dave Mills.
  783: 
  784: 2001-04-01  Harlan Stenn  <stenn@whimsy.udel.edu>
  785: 
  786: 	* configure.in (OPENSSL): Just use -lcrypto.
  787: 	Reported by Dave Mills.
  788: 
  789: 2001-03-31  Harlan Stenn  <stenn@whimsy.udel.edu>
  790: 
  791: 	* configure.in: 4.0.99k20
  792: 
  793: 	* ntpd/refclock_heath.c: Add support for GC-1000 II.
  794: 	From Dave Mills.
  795: 
  796: 	* ntpd/ntp_proto.c (transmit): Check peer->unreach.
  797: 	(peer_clear): peer->outdate is a f(BURST_INTERVAL1), not
  798: 	NTP_MINPOLL.
  799: 	* ntpd/ntp_loopfilter.c (local_clock): mode_ntpdate stuff.
  800: 	* ntpd/ntp_crypto.c: OpenSSL/RSAREF support.
  801: 	* ntpd/cmd_args.c: Use -q, not -z, for mode_ntpdate.
  802: 	(getstartup): nofork on mode_ntpdate. Usage update.
  803: 	* include/ntp_crypto.h: OpenSSL/RSAREF support.
  804: 	From: Dave Mills.
  805: 
  806: 	* configure.in (rsaref): Buglet.
  807: 
  808: 2001-03-30  Harlan Stenn  <stenn@whimsy.udel.edu>
  809: 
  810: 	* ntpd/ntp_proto.c (clock_update): mode_ntpdate support.
  811: 	* ntpd/ntp_loopfilter.c	(local_clock): mode_ntpdate support.
  812: 	* ntpd/cmd_args.c: Added -z (mode_ntpdate).
  813: 	* include/ntpd.h: mode_ntpdate added.
  814: 	* include/ntp_crypto.h: RSAREF/OPENSSL cleanup.
  815: 	From: Dave Mills.
  816: 
  817: 2001-03-29  Harlan Stenn  <stenn@whimsy.udel.edu>
  818: 
  819: 	* config.h.in:
  820: 	* aclocal.m4:
  821: 	* configure.in: Prepare for OpenSSL support
  822: 
  823: 2001-03-28  Harlan Stenn  <stenn@whimsy.udel.edu>
  824: 
  825: 	* README.rsa: Note that RSAEURO will not work.
  826: 	Reported by: pieter.delacourt@banksys.be
  827: 
  828: 2001-03-25  Harlan Stenn  <stenn@whimsy.udel.edu>
  829: 
  830: 	* include/ntp_if.h:
  831: 	* include/ntp_machine.h:
  832: 	* include/ntp_unixtime.h:
  833: 	* libntp/humandate.c:
  834: 	* libntp/iosignal.c:
  835: 	* libntp/mktime.c:
  836: 	* libntp/prettydate.c:
  837: 	* libntp/systime.c:
  838: 	* libntp/tvtoa.c:
  839: 	* libntp/uglydate.c:
  840: 	* libntp/utvtoa.c:
  841: 	* libparse/clk_computime.c:
  842: 	* libparse/clk_dcf7000.c:
  843: 	* libparse/clk_hopf6021.c:
  844: 	* libparse/clk_meinberg.c:
  845: 	* libparse/clk_rawdcf.c:
  846: 	* libparse/clk_rcc8000.c:
  847: 	* libparse/clk_schmid.c:
  848: 	* libparse/clk_trimtaip.c:
  849: 	* libparse/clk_trimtsip.c:
  850: 	* libparse/clk_varitext.c:
  851: 	* libparse/parse.c:
  852: 	* libparse/parse_conf.c:
  853: 	* ntpd/check_y2k.c:
  854: 	* ntpd/ntp_config.c:
  855: 	* ntpd/ntp_control.c:
  856: 	* ntpd/ntp_intres.c:
  857: 	* ntpd/ntp_io.c:
  858: 	* ntpd/ntp_loopfilter.c:
  859: 	* ntpd/ntp_monitor.c:
  860: 	* ntpd/ntp_proto.c:
  861: 	* ntpd/ntp_refclock.c:
  862: 	* ntpd/ntp_request.c:
  863: 	* ntpd/ntp_resolver.c:
  864: 	* ntpd/ntp_timer.c:
  865: 	* ntpd/ntp_util.c:
  866: 	* ntpd/ntpd.c:
  867: 	* ntpd/refclock_acts.c:
  868: 	* ntpd/refclock_arbiter.c:
  869: 	* ntpd/refclock_arc.c:
  870: 	* ntpd/refclock_as2201.c:
  871: 	* ntpd/refclock_atom.c:
  872: 	* ntpd/refclock_bancomm.c:
  873: 	* ntpd/refclock_chronolog.c:
  874: 	* ntpd/refclock_chu.c:
  875: 	* ntpd/refclock_datum.c:
  876: 	* ntpd/refclock_dumbclock.c:
  877: 	* ntpd/refclock_fg.c:
  878: 	* ntpd/refclock_gpsvme.c:
  879: 	* ntpd/refclock_heath.c:
  880: 	* ntpd/refclock_hpgps.c:
  881: 	* ntpd/refclock_irig.c:
  882: 	* ntpd/refclock_jupiter.c:
  883: 	* ntpd/refclock_leitch.c:
  884: 	* ntpd/refclock_local.c:
  885: 	* ntpd/refclock_msfees.c:
  886: 	* ntpd/refclock_mx4200.c:
  887: 	* ntpd/refclock_nmea.c:
  888: 	* ntpd/refclock_oncore.c:
  889: 	* ntpd/refclock_pcf.c:
  890: 	* ntpd/refclock_pst.c:
  891: 	* ntpd/refclock_shm.c:
  892: 	* ntpd/refclock_tpro.c:
  893: 	* ntpd/refclock_trak.c:
  894: 	* ntpd/refclock_true.c:
  895: 	* ntpd/refclock_ulink.c:
  896: 	* ntpd/refclock_usno.c:
  897: 	* ntpd/refclock_wwv.c:
  898: 	* ntpd/refclock_wwvb.c:
  899: 	* ntpdate/ntpdate.c:
  900: 	* ntpdate/ntptime_config.c:
  901: 	* ntpdate/ntptimeset.c:
  902: 	* ntpdc/ntpdc.c:
  903: 	* ntpdc/ntpdc_ops.c:
  904: 	* ntpq/ntpq.c:
  905: 	* ntpq/ntpq_ops.c:
  906: 	* ntptrace/ntptrace.c:
  907: 	* parseutil/testdcf.c:
  908: 	* util/hist.c:
  909: 	* util/ntp-genkeys.c:
  910: 	* util/ntptime.c:
  911: 	* util/precision.c:
  912: 	* util/tickadj.c:
  913: 	time.h and sys/time.h cleanup.
  914: 
  915: 2001-03-24  Harlan Stenn  <stenn@whimsy.udel.edu>
  916: 
  917: 	* configure.in: '99k19
  918: 
  919: 	* ntpd/refclock_atom.c (atom_ppsapi): PPS API RFC alignment patches.
  920: 	From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
  921: 
  922: 	* util/ntptime.c: MNT options
  923: 	From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
  924: 
  925: 	* ntpd/ntp_refclock.c (refclock_newpeer): Lose "extra" free().
  926: 	From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
  927: 
  928: 	* configure.in: 4.0.99k18 and auto* upgrade
  929: 
  930: 2001-03-14  Harlan Stenn  <stenn@whimsy.udel.edu>
  931: 
  932: 	* ntpdc/ntpdc_ops.c (printpeer): No more "valid".
  933: 	* ntpd/ntp_request.c (peer_info): No more "valid".
  934: 	* ntpd/ntp_refclock.c (refclock_transmit): valid/hpoll cleanup.
  935: 	* ntpd/ntp_proto.c (transmit): valid/hpoll and peer->ttl cleanup.
  936: 	peer->valid/oreach cleanup.
  937: 	(receive): Call newpeer() with the pkt->ppoll, not
  938: 	NTP_MINDPOLL (in several places).
  939: 	In AM_NEWPASS, if we have a NULL peer, return.
  940: 	(poll_update): Added xpoll definition, fixed oldpoll definition.
  941: 	Algorithmic improvements.
  942: 	* ntpd/ntp_peer.c (newpeer): Better minpoll/maxpoll
  943: 	initialization.
  944: 	(resetmanycast): That's a poll_update() on an MDF_ACAST, not a
  945: 	poll_clear().
  946: 	* ntpd/ntp_crypto.c: include <fcntl.h>.
  947: 	(crypto_recv): Leave the crypto_flags alone when wiggling the
  948: 	peer-> stuff.
  949: 	(crypto_cert): Make room for daddy.  Do a real open() on the cert
  950: 	file.  Read the cert.  Initial hack and slash.  Better debug info.
  951: 	* ntpd/ntp_control.c: CP_VALID now does "unreach".
  952: 	(ctl_putpeer): Ditto.
  953: 	* include/ntp_request.h: info_peer gets a placeholder for "valid".
  954: 	* include/ntp_crypto.h (CRYPTO_FLAG_CERT): Comment update.
  955: 	* include/ntp.h: Lose "valid" from struct peer.
  956: 	From: Dave Mills.
  957: 
  958: 2001-03-05  Harlan Stenn  <stenn@whimsy.udel.edu>
  959: 
  960: 	* ntpd/ntp_proto.c (transmit): hpoll calc logic cleanup.
  961: 	(receive): New cert stuff.
  962: 	(poll_update): Improvements.
  963: 	(peer_clear): New cert stuff.
  964: 	(peer_xmit): New cert stuff.
  965: 	* ntpd/ntp_crypto.c: New cert stuff, documentation cleanup.  Lose
  966: 	extraneous poll_uopdate()s.
  967: 	* ntpd/ntp_control.c: Deal with new cert stuff.
  968: 	* ntpd/ntp_config.c (getconfig): Handle CONF_CRYPTO_CERT.
  969: 	* include/ntp_crypto.h (CRYPTO_FLAG_CERT): Added.
  970: 	(CRYPTO_CERT): Added.
  971: 	(CRYPTO_CONF_CERT): Added.
  972: 	Add declaration for struct value certif.
  973: 	* include/ntp_control.h (CS_CERTIF): Added.
  974: 	(CP_CERTIF): Added.
  975: 	* include/ntp_config.h (CONF_CRYPTO_CERT): Added.
  976: 	* include/ntp.h (TEST10,TEST11): New meaning.  Add certif to
  977: 	struct peer.
  978: 	(FLAG_PROVEN): Added.
  979: 	(MAX_EXT_LEN): Removed.
  980: 	exten grew from 672/4 to 5000/4 for PUBKEY.
  981: 	From: Dave Mills.
  982: 
  983: 2001-03-03  Harlan Stenn  <stenn@whimsy.udel.edu>
  984: 
  985: 	* ntpd/ntp_proto.c (transmit): Documentation cleanup.
  986: 	(receive): Watch for NULL peer->pubkey.ptr (TEST11).
  987: 	(poll_update): peer->nextdate, not ->outdate. More cleanup around
  988: 	the disabled PUBKEY chunk.
  989: 	* ntpd/ntp_crypto.c (make_keylist): ltemp might be smaller than
  990: 	sys_automax - check peer->kpoll, too.  Other ltemp cleanup.
  991: 	(crypto_recv): fstamp is a PUBKEY-only variable.
  992: 	* include/ntp.h (NTP_AUTOMAX): 13, not 12.
  993: 	From: Dave Mills.
  994: 
  995: 2001-03-01  Harlan Stenn  <stenn@whimsy.udel.edu>
  996: 
  997: 	* ntpd/ntp_proto.c (transmit): hpoll cleanup.  Call clock_select()
  998: 	after calling poll_update, not before.
  999: 	(receive): Call poll_update after crypto_recv if FLAG_SKEY.
 1000: 	(process_packet): Set peer->ppoll Later.
 1001: 	(poll_update): peer->hpoll sanity checking.  Set peer->outdate,
 1002: 	not ->nextate, when burst > 0.  MDF_ACAST cleanup.
 1003: 	(clock_select): Fix hpoll typo in call to poll_update().
 1004: 	* ntpd/ntp_crypto.c (crypto_xmit): tstamp's value is a function of
 1005: 	PUBKEY.
 1006: 	* include/ntp.h (clear_to_zero): #define value is a function of
 1007: 	AUTOKEY.
 1008: 	From: Dave Mills.
 1009: 
 1010: 2001-02-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 1011: 
 1012: 	* ntpd/ntp_proto.c (transmit): Documentation/code update.
 1013: 	(poll_update): Sanity check peer->hpoll.  Improve debug info.
 1014: 	(peer_clear): Improve debug info.  Turn off FLAG_ASSOC in addition
 1015: 	to FLAG_AUTOKEY.
 1016: 	(clock_select): peer->status is CTL_PST_SEL_DISTSYSPEER, and don't
 1017: 	call poll_update().  Make each entry in the peer_list a
 1018: 	CTL_PST_SEL_SELCAND sooner, too.  Rework similar logic later on.
 1019: 	Change debug level on some info.
 1020: 	(peer_xmit): Check peer->flags using FLAG_ASSOC, not
 1021: 	CRYPTO_FLAG_AUTO in a couple places.  Don't call poll_update() if
 1022: 	sendlen > LEN_PKT_NOMAC.
 1023: 	* ntpd/ntp_loopfilter.c (local_clock): Improve debug info.
 1024: 	Sanity-check sys_poll sooner.
 1025: 	* ntpd/ntp_crypto.c: New artwork.
 1026: 	(COOKIE_LEN,AUTOKEY_LEN,VALUE_LEN): New.
 1027: 	(make_keylist): More debug info.  Use FLAG_ASSOC, not
 1028: 	CRYPTO_FLAG_ASSOC.
 1029: 	(crypto_recv): More debug info.  Clean up/improve sanity checks on
 1030: 	CRYPTO_ASSOC and CRYPTO_RESP packets, and in other places.
 1031: 	(crypto_xmit): Clean up/improve sanity checks on CRYPTO_ASSOC and
 1032: 	CRYPTO_RESP packets.  Use FLAG_ASSOC, not CRYPTO_FLAG_ASSOC.  More
 1033: 	debug info.
 1034: 	* include/ntp.h (NTP_CANLOCK): Lose it.
 1035: 	(clear_to_zero): is now "assoc".
 1036: 	(FLAG_ASSOC): Added.
 1037: 	From: Dave Mills
 1038: 
 1039: 2001-02-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 1040: 
 1041: 	* ntpdate/ntpdate.h (NTP_MAXAGE): Added.
 1042: 	* ntpd/ntp_refclock.c (refclock_receive): Cleanup.
 1043: 	* ntpd/ntp_proto.c (transmit): Don't reset peer->ppoll in one case.
 1044: 	Update peer->hpoll based on CTL_PST_SEL_CORRECT, not FLAG_SYSPEER.
 1045: 	Don't update peer->ppoll based on MDF_[BM]CAST.
 1046: 	(peer_clear): ppoll is initialized to maxpoll.
 1047: 	(clock_select): call poll_update(peer->hpoll) earlier.
 1048: 	(peer_xmit): Call poll_update later.
 1049: 	* ntpd/ntp_peer.c (peer_config): Rework initial values of [hkp]poll.
 1050: 	* ntpd/ntp_loopfilter.c (CLOCK_PHI): Added.  Deal with other
 1051: 	(allow_*) stuff.  Treat Windows/NT the same as others regarding
 1052: 	panic steps.  Deal with tinker stuff.
 1053: 	* ntpd/ntp_config.c: Tinker stuff.
 1054: 	* ntpd/cmd_args.c (getCmdOpts): -g now wiggles "allow_panic"
 1055: 	(renamed from "correct_any").  -x now wiggles "allow_step"
 1056: 	(renamed from "allow_step_backward").
 1057: 	* include/ntpd.h: Add tinker variables.  Rename/rework variables
 1058: 	associated with "permission to step" and "permission to make a
 1059: 	panic correction"
 1060: 	* include/ntp_config.h (CONFIG_TINKER): Added.
 1061: 	(CONF_CLOCK_MAX): Tinker keyword
 1062: 	(CONF_CLOCK_PANIC): Tinker keyword
 1063: 	(CONF_CLOCK_PHI): Tinker keyword
 1064: 	(CONF_CLOCK_MINSTEP): Tinker keyword
 1065: 	* include/ntp.h (NTP_MINCLOCK): Tinker and other cleanup.
 1066: 	From: Dave Mills
 1067: 
 1068: 2001-02-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 1069: 
 1070: 	* ntpd/ntp_proto.c (transmit): Don't peer_clear() and reset
 1071: 	minpoll unconditionally; make sure the peer is configured.
 1072: 	(poll_update): When updating peer->ppoll, check on BCAST and
 1073: 	MCAST, not ACAST
 1074: 	(peer_clear): PUBKEY cleanup.  Zero out the peer structure
 1075: 	earlier. Initialization cleanup/fixes.
 1076: 	(peer_xmit): CRYPTO_FLAG_AUTO is in peer->flags now.
 1077: 	(key_expire): Debug output.
 1078: 	* ntpd/ntp_peer.c (unpeer): PUBKEY cleanup.
 1079: 	(newpeer): peer variable setup cleanup.
 1080: 	* ntpd/ntp_crypto.c (make_keylist): Keep CRYPTO_FLAG_AUTO in
 1081: 	peer->flags, not crypto_flags.
 1082: 	(crypto_xmit): Ditto.
 1083: 	(crypto_recv): Fix up RV_TSP logic (several places).
 1084: 	* include/ntp.h (clear_to_zero): Moved...
 1085: 	From: Dave Mills.
 1086: 
 1087: 2001-02-14  Harlan Stenn  <stenn@whimsy.udel.edu>
 1088: 
 1089: 	* ntpd/ntp_proto.c (peer_xmit): Crypto-related fixes
 1090: 	From Dave Mills.
 1091: 
 1092: 	* ntpd/ntp_crypto.c (crypto_recv): Allocate space for the trailing
 1093: 	NUL on the keystr.
 1094: 
 1095: 2001-01-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 1096: 
 1097: 	* configure.in: 4.0.99k17
 1098: 
 1099: 	* ntpd/refclock_local.c (STRATUM): 3 -> 5
 1100: 	* ntpd/ntp_proto.c: sys_maxd -> sys_selerr, sys_epsil ->
 1101: 	sys_syserr.  various cleanups and improvements.
 1102: 	From: Dave Mills.
 1103: 
 1104: 2001-01-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 1105: 
 1106: 	* configure.in: 4.0.99k16
 1107: 
 1108: 	* config.h.in: Regenerated - became empty somehow.
 1109: 	Reported by John.Hay@icomtek.csir.co.za
 1110: 
 1111: 	* ntpd/ntp_proto.c (clock_select): Fix sdisp calculation.
 1112: 	From Dave Mills.
 1113: 
 1114: 	* util/ntp-genkeys.c:
 1115: 	* ntpd/refclock_chu.c:
 1116: 	* ntpd/refclock_atom.c:
 1117: 	* ntpd/ntpd.c:
 1118: 	* ntpd/ntp_loopfilter.c:
 1119: 	* ntpd/ntp_io.c:
 1120: 	* ntpd/cmd_args.c:
 1121: 	* libntp/audio.c:
 1122: 	* include/l_stdlib.h:
 1123: 	* html/copyright.htm:
 1124: 	Lint fixes (Thanks bunches!)
 1125: 	From: Marc.Brett@westerngeco.com
 1126: 
 1127: 2001-01-18  Harlan Stenn  <stenn@whimsy.udel.edu>
 1128: 
 1129: 	* configure.in: 4.0.99k15
 1130: 
 1131: 	* ntpd/ntp_proto.c (clock_select): Track error[] items sooner.
 1132: 	Typo grabbing the dtemp value and in the sdisp calculation.
 1133: 	From Dave Mills.
 1134: 
 1135: 2001-01-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 1136: 
 1137: 	* configure.in: 4.0.99k14
 1138: 
 1139: 	* ntpd/ntp_proto.c: Change description of sys_rootdelay and
 1140: 	sys_rootdispersion.
 1141: 	(process_packet): Fix p_del test (bad distance).
 1142: 	(process_packet): Fix bad synch distance test.
 1143: 	(process_packet): Fix call to clock_filter (p_disp)
 1144: 	(clock_update): Fix sys_rootdelay calculation.
 1145: 	(clock_filter): Initialize jit to f(sys_precision)
 1146: 	(clock_filter): Update jit using distance[i] instead of
 1147: 	SQUARE().  peer->jitter uses dtemp instead of SQUARE().
 1148: 	(clock_filter): Updated CLOCK_SGATE checks.  When printing debug
 1149: 	info, show jitter along with popcorn spike.
 1150: 	(clock_select): New sdisp calc.
 1151: 	(root_distance): New return value calc.
 1152: 	(peer_xmit): xpkt.rootdispersion value change.
 1153: 	* include/ntp.h (CLOCK_SGATE): Popcorn spike gate (Whoa, Molly!)
 1154: 	From Dave Mills.
 1155: 
 1156: 2001-01-13  Harlan Stenn  <stenn@whimsy.udel.edu>
 1157: 
 1158: 	* config.sub (Repository): Updated.
 1159: 	* config.guess (Repository): Updated.
 1160: 
 1161: 	* ntpd/ntp_loopfilter.c (local_clock): Just use sys_jitter in the
 1162: 	calculation for rootdispersion.
 1163: 	From Dave Mills.
 1164: 
 1165: 2001-01-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 1166: 
 1167: 	* ntpd/ntp_proto.c (transmit): Fix documentation. Set
 1168: 	peer->outdate and call poll_update in a new place.  Sanity checks
 1169: 	in the MODE_BROADCAST case.
 1170: 	(clock_select): Track the old peer.  Use the old peer in
 1171: 	subsequent checks, where appropriate.  Clean up unpeer() logic.
 1172: 	From Dave Mills.
 1173: 
 1174: 2001-01-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 1175: 
 1176: 	* ntpd/refclock_chu.c: Start using HAVE_AUDIO.
 1177: 	* ntpd/ntp_proto.c (clock_select): If about to discard an
 1178: 	ephemeral association, do it only if not the system peer.
 1179: 	From Dave Mills.
 1180: 
 1181: 	* html/pic/wingdorothy.gif:
 1182: 	* html/pic/bustardfly.gif:
 1183: 	* html/pic/boom3a.gif:
 1184: 	* html/pic/tonea.gif:
 1185: 	* html/pic/stack1a.jpg:
 1186: 	* html/pic/pogoa.gif:
 1187: 	* html/pic/pogo8.gif:
 1188: 	* html/pic/pogo6.gif:
 1189: 	* html/pic/pogo5.gif:
 1190: 	* html/pic/pogo4.gif:
 1191: 	* html/pic/pogo3.gif:
 1192: 	* html/pic/pogo1.gif:
 1193: 	* html/pic/oz2.gif:
 1194: 	* html/pic/flatheads.gif:
 1195: 	* html/pic/boom4.gif:
 1196: 	* html/pic/boom3.gif:
 1197: 	* html/pic/appletree.gif:
 1198: 	* html/pic/alice51.gif:
 1199: 	* html/pic/alice44.gif:
 1200: 	* html/pic/alice35.gif:
 1201: 	* html/pic/alice31.gif:
 1202: 	* html/pic/alice15b.gif:
 1203: 	* html/pic/alice13.gif:
 1204: 	* html/pic/alice11.gif:
 1205: 	* html/release.htm:
 1206: 	* html/rdebug.htm:
 1207: 	* html/prefer.htm:
 1208: 	* html/porting.htm:
 1209: 	* html/ntptrace.htm:
 1210: 	* html/ntpq.htm:
 1211: 	* html/ntpdate.htm:
 1212: 	* html/monopt.htm:
 1213: 	* html/kernpps.htm:
 1214: 	* html/index.htm:
 1215: 	* html/hints.htm:
 1216: 	* html/gadget.htm:
 1217: 	* html/driver7.htm:
 1218: 	* html/copyright.htm:
 1219: 	* html/config.htm:
 1220: 	* html/build.htm:
 1221: 	* html/authopt.htm:
 1222: 	* html/assoc.htm:
 1223: 	* html/accopt.htm:
 1224: 	Cleanup from Dave Mills.
 1225: 
 1226: 2000-12-30  Harlan Stenn  <stenn@whimsy.udel.edu>
 1227: 
 1228: 	* configure.in: 4.0.99k13
 1229: 
 1230: 	* ntpd/refclock_wwv.c (wwv_start): Call audio_init with DEVICE_AUDIO.
 1231: 	* ntpd/refclock_irig.c (irig_start): Call audio_init with DEVICE_AUDIO.
 1232: 	* ntpd/refclock_chu.c: Documentation cleanup.
 1233: 	(DEVICE_AUDIO): Added.
 1234: 	(fd_audio): Added.
 1235: 	(chu_start): Separate audio from serial device.
 1236: 	(chu_receive): Rewrite - get data from serial or audio device as
 1237: 	appropriate.
 1238: 	(chu_audio_receive): Renamed (from chu_receive) to allow both
 1239: 	audio and serial capability.
 1240: 	(chu_serial_receive): Ditto.
 1241: 	(chu_decode): Do the Right Thing based on audio/serial data.
 1242: 	* ntpd/ntp_refclock.c (refclock_open): Check for failure using <0
 1243: 	instead of ==-1.
 1244: 	* libntp/audio.c: Header cleanup, and remove
 1245: 	HAVE_STRUCT_AUDIO_INFO_* related fields.
 1246: 	(audio_init): Func arg is device to attempt to open.
 1247: 	* include/audio.h (audio_init): Now takes a char * argument.
 1248: 	From Dave Mills.
 1249: 
 1250: 	* configure.in (ntp_refclock): HAVE_AUDIO added.  Remove
 1251: 	HAVE_STRUCT_AUDIO_INFO_* stuff; Dave rewrote the audio stuff.
 1252: 
 1253: 2000-12-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 1254: 
 1255: 	* configure.in: 4.0.99k12
 1256: 
 1257: 2000-12-27  Harlan Stenn  <stenn@whimsy.udel.edu>
 1258: 
 1259: 	* html/release.htm:
 1260: 	* html/patches.htm:
 1261: 	* html/measure.htm:
 1262: 	* html/confopt.htm:
 1263: 	* html/clockopt.htm:
 1264: 	* html/biblio.htm:
 1265: 	* html/authopt.htm:
 1266: 	* html/assoc.htm:
 1267: 	Updates from Dave Mills.
 1268: 
 1269: 	* include/ntp_crypto.h: Make sure crypto_flags is visible.
 1270: 	From Dave Mills.
 1271: 
 1272: 2000-12-14  Harlan Stenn  <stenn@whimsy.udel.edu>
 1273: 
 1274: 	* ntpd/ntp_proto.c (process_packet): pleap/pstratum.
 1275: 	(peer_xmit): Use CRYPTO_FLAG_AUTO.
 1276: 	* ntpd/ntp_crypto.c (make_keylist): Use CRYPTO_FLAG_AUTO. Only
 1277: 	sign host name and timestamps if the clock is synched.
 1278: 	* include/ntp_crypto.h (CRYPTO_FLAG_AUTO): Added.
 1279: 	From: Dave Mills
 1280: 
 1281: 2000-12-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 1282: 
 1283: 	* ntpd/ntp_proto.c (transmit): Call clock_select in a few new
 1284: 	places.  BURST/IBURST cleanup.  Don't turn off FLAG_BURST at the
 1285: 	EOburst.
 1286: 	(receive): Set peer->unreach = 0 before we call process_packet().
 1287: 	(process_packet): ditto, before calling poll_update().  Lose some
 1288: 	debugging, MODE_BCLIENT/CLIENT cleanup.
 1289: 	(poll_update): Bump nextupdate on FLAG_REFCLOCK, not _REFCLOCK or
 1290: 	_IBURST.
 1291: 	(peer_clear): Don't set IBURST on MDF_BCLNT.
 1292: 	From: Dave Mills.
 1293: 
 1294: 	* ntpdate/ntpdate.c (alarming): Appease ansi2knr.
 1295: 
 1296: 2000-12-10  Harlan Stenn  <stenn@whimsy.udel.edu>
 1297: 
 1298: 	* ntpd/ntp_control.c (ctl_putpeer): CP_TTL and CP_TTLMAX
 1299: 	MDF_ACAST and MDF_MCAST cleanup.
 1300: 
 1301: 	* ntpd/refclock_wwv.c (wwv_start): ttlmax/ttl cleanup.
 1302: 	* ntpd/refclock_usno.c (usno_timeout): ttlmax/ttl cleanup.
 1303: 	* ntpd/refclock_parse.c (CLK_REALTYPE): ttlmax/ttl cleanup.
 1304: 	* ntpd/refclock_chu.c (chu_start): ttlmax/ttl cleanup.
 1305: 	* ntpd/refclock_acts.c (acts_timeout): ttlmax/ttl cleanup.
 1306: 	* ntpd/ntp_refclock.c (refclock_newpeer): Don't do the
 1307: 	any_interface -> loopback_interface trick.
 1308: 	* ntpd/ntp_proto.c (transmit): Broadcast/manycast cleanup.
 1309: 	* ntpd/ntp_peer.c: Cleanup.
 1310: 	* ntpd/ntp_io.c: Cleanup.
 1311: 	* ntpd/ntp_crypto.c (crypto_recv): AUTOKEY based on BCLNT, not MCAST2.
 1312: 	* include/ntpd.h: Declare findbcastinter().
 1313: 	* include/ntp.h: struct peer's ttlmax is now max ttl/refclock
 1314: 	mode.  ttl is now ttl for manycast mode.
 1315: 	(FLAG_MCAST): Reworked several FLAG_ bits.
 1316: 	From Dave Mills.
 1317: 
 1318: 2000-12-05  Harlan Stenn  <stenn@whimsy.udel.edu>
 1319: 
 1320: 	* ntpq/ntpq.c: CP_TTLMAX support.
 1321: 	* ntpd/ntp_proto.c (transmit): MDF_ACAST ttl fixes.
 1322: 	* ntpd/ntp_peer.c (resetmanycast): Reset ttl if MDF_ACAST.
 1323: 	(peer_config): Save max ttl in ttlmax.
 1324: 	* ntpd/ntp_control.c: ttlmax support.
 1325: 	* include/ntp_control.h (CP_TTLMAX): Added.
 1326: 	* include/ntp.h: Added ttlmax to struct peer.
 1327: 	Dave Mills.
 1328: 
 1329: 2000-12-03  Harlan Stenn  <stenn@whimsy.udel.edu>
 1330: 
 1331: 	* ntpd/ntp_proto.c (receive): That any_interface is now an
 1332: 	rbufp->dstadr.
 1333: 	Various other doc and code cleanup.
 1334: 	* ntpd/ntp_peer.c (findmanycastpeer): Fixes
 1335: 	From Dave Mills
 1336: 
 1337: 2000-12-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 1338: 
 1339: 	* ntpd/ntp_request.c (do_conf): call peer_config with
 1340: 	any_interface, not 0.
 1341: 	* ntpd/ntp_proto.c (transmit): Manycast cleanup
 1342: 	* ntpd/ntp_peer.c (findmanycastpeer): manycast cleanup
 1343: 	* ntpd/ntp_io.c (sendpkt): Only check ttl if we have a ttl
 1344: 	(findinterface): Cleanup
 1345: 	* ntpd/ntp_control.c: cleanup
 1346: 	* include/ntpd.h: Added resetmanycast.
 1347: 	* include/ntp_control.h (CP_TTL): disp -> ttl
 1348: 	* ntpq/ntpq.c: disp -> ttl
 1349: 	From Dave Mills
 1350: 
 1351: 2000-11-26  Harlan Stenn  <stenn@whimsy.udel.edu>
 1352: 
 1353: 	* configure.in: 4.0.99k11
 1354: 
 1355: 	* ntpd/ntp_proto.c (transmit):
 1356: 	* ntpd/ntp_peer.c:
 1357: 	* ntpd/ntp_io.c:
 1358: 	* ntpd/ntp_control.c (ctl_putpeer):
 1359: 	* ntpd/ntp_config.c (getconfig):
 1360: 	* include/ntpd.h: mcast/ucast interface cleanup.
 1361: 	From: Dave Mills
 1362: 
 1363: 	* include/ntp_request.h: Put data[] as MAXFILENAME+16.  This will
 1364: 	fix the conf_peer requests again, but re-break compatibility with
 1365: 	old versions of the daemon.  Sigh.
 1366: 
 1367: 	* util/ntp-genkeys.c (cleanlinks): Don't do it if nosymlinks.
 1368: 
 1369: 2000-11-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 1370: 
 1371: 	* ntpd/refclock_parse.c (rawdcf_init_1): make Linux happier with
 1372: 	some modem control stuff.
 1373: 	From: Wolfram Pienkoss <wp@bszh.de> (via Frank Kardel)
 1374: 
 1375: 	* ntpd/refclock_pcf.c (pcf_poll): isdst fix
 1376: 	From: Andreas Voegele <andreas.voegele@gmx.de>
 1377: 
 1378: 2000-10-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 1379: 
 1380: 	* configure.in: 4.0.99k10
 1381: 
 1382: 	* ntpd/refclock_wwvb.c (wwvb_start): Cosmetic reorder.
 1383: 	* ntpd/refclock_atom.c (RANGEGATE): Cleanup.  Add ASTAGE.
 1384: 	Add ppsparams to struct ppsunit.
 1385: 	(atom_start): Init peer->burst to ASTAGE.
 1386: 	(atom_shutdown): Multi-handle
 1387: 	(atom_pps): Multi-handle
 1388: 	(atom_pps): RANGEGATE cleanup
 1389: 	(atom_poll): Poll count cleanup.  Error check cleanup.  Burst cleanup.
 1390: 	* ntpd/ntp_refclock.c (refclock_transmit): Lose the pre-burst
 1391: 	check poll_update().
 1392: 	(refclock_sample): Fix the jitter calc.
 1393: 	(refclock_receive): Pass the jitter to the clock_filter().
 1394: 
 1395: 	* ntpd/ntp_proto.c (clock_update): If we lose sync, reset the poll
 1396: 	to NTP_MINDPOLL.
 1397: 	(poll_update): Poll wiggles.  Make sure peer->nextdate is timely.
 1398: 	(clock_select): If we lose sync, reset the poll to NTP_MINDPOLL.
 1399: 	* ntpd/ntp_loopfilter.c (local_clock): Show the asocid in debug
 1400: 	output.  popcorn debug message changes.  Clamp the poll interval
 1401: 	if the system peer has changed.  PPS wiggle changes.
 1402: 	From Dave Mills.
 1403: 
 1404: 2000-10-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 1405: 
 1406: 	* ntpd/refclock_pcf.c (pcf_start):
 1407: 	* html/driver35.htm:
 1408: 	The radio clock transmits 69 bits with a period of 2.5
 1409: 	milliseconds per bit. Thus the driver now sets the default
 1410: 	calibration offset to 0.1725 (69 * 2.5 = 172.5).
 1411: 	Its now possible to disable the check of the radio clock's
 1412: 	synchronisation status bit. Several users requested this option.
 1413: 	From: Andreas Voegele <andreas.voegele@gmx.de>
 1414: 
 1415: 	* html/refclock.htm:
 1416: 	* html/rdebug.htm:
 1417: 	* html/prefer.htm:
 1418: 	* html/pps.htm:
 1419: 	* html/ntpdc.htm:
 1420: 	* html/miscopt.htm:
 1421: 	* html/ldisc.htm:
 1422: 	* html/kern.htm:
 1423: 	* html/index.htm:
 1424: 	* html/exec.htm:
 1425: 	* html/driver22.htm:
 1426: 	* html/clockopt.htm:
 1427: 	Updates from Dave Mills
 1428: 
 1429: 	* ntpd/ntp_intres.c (request): Sanity check the size of the response
 1430: 
 1431: 2000-10-15  Harlan Stenn  <stenn@whimsy.udel.edu>
 1432: 
 1433: 	* ntpq/ntpq_ops.c (dopeers): Dave didn't like the patch to show
 1434: 	the units on the times...
 1435: 	* ntpdc/ntpdc_ops.c (doset): SYS_FLAG_PPS cleanup
 1436: 	* ntpd/refclock_wwv.c (wwv_newchan): Update the peer refid if
 1437: 	we're talking to a stratum 0 source
 1438: 	* ntpd/refclock_trak.c: Needs PPS
 1439: 	* ntpd/refclock_oncore.c: Disable for now
 1440: 	* ntpd/refclock_mx4200.c: Needs PPSAPI, not PPS
 1441: 	Header cleanup.  PPS interface cleanup.
 1442: 	Process sentences with a switch
 1443: 	Cleanup and sanity checks
 1444: 	* ntpd/refclock_datum.c: header cleanup, light body cleanup
 1445: 	* ntpd/refclock_conf.c: CLOCK_TRAK needs PPS
 1446: 	MX4200 needs PPSAPI, not PPS
 1447: 	Disable ONCORE for now
 1448: 	* ntpd/refclock_bancomm.c: Surgery
 1449: 	* ntpd/refclock_atom.c: Cleanup
 1450: 	(atom_control): added
 1451: 	(atom_ppsapi): added
 1452: 	* ntpd/ntp_request.c (setclr_flags): SYS_FLAG_PPS cleanup
 1453: 	* ntpd/ntp_refclock.c: stropts.h back in in TTYCLK and
 1454: 	HAVE_SYS_CLKDEFS_H
 1455: 	Get ntp_syscall if KERNEL_PLL
 1456: 	Define cal_enable
 1457: 	(refclock_receive): Cleanup
 1458: 	(refclock_control): sanity check procptr
 1459: 	* ntpd/ntp_proto.c (init_proto): pps_enable
 1460: 	(proto_config): Turn on/off PPS discipline
 1461: 	* ntpd/ntp_loopfilter.c: pps_enable
 1462: 	(local_clock): record_loop_stats() if !ntp_enable
 1463: 	(local_clock): Turn off PPS if it's not enabled
 1464: 	Other cleanup/fixes
 1465: 	* ntpd/ntp_config.c: pps and calibrate keywords.  Initialize
 1466: 	pps_assert to 0, not 1 (swap assert/clear?)
 1467: 	* include/ntpd.h: We have pll_status if KERNEL_PLL
 1468: 	Added pps_enable and cal_enable
 1469: 	* include/ntp_request.h (SYS_FLAG_PPS): Renamed from
 1470: 	SYS_FLAG_AUTHENTICATE
 1471: 	* include/ntp.h (PROTO_PPS): Added
 1472: 	(PROTO_CAL): Added
 1473: 	From: Dave Mills
 1474: 
 1475: 2000-09-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 1476: 
 1477: 	* include/ntp_refclock.h (stropts.h, sys/clkdefs.h): Harmful and
 1478: 	useless file include's turned off.
 1479: 	* libntp/iosignal.c (netinet/in.h, sys/sockio.h): Duplicate file
 1480: 	include's turned off.
 1481: 	* ntpd/ntp_refclock.c (ntp_tty.h): File included.
 1482: 	(refclock_open, refclock_ioctl): Use `TTY' from ntp_tty.h.
 1483: 	* ntpd/refclock_atom.c: Grab a few headers regardless; if we don't
 1484: 	CLOCK_ATOM we provide a stub pps_sample() routine so the WHARTON
 1485: 	can be compiled/used.
 1486: 	* ntpq/ntpq_ops.c (dopeers, doopeers): Print the units for
 1487: 	each column header.
 1488: 	Tue Sep 12 16:25:51 2000  Philippe De Muyter  <phdm@macqel.be>
 1489: 
 1490: 	* ntpd/refclock_atom.c (atom_start): Lose "temp", because we now
 1491: 	initially either CAPTUREASSERT or CAPTURECLEAR.
 1492: 	(atom_pps): pps_info_t is our friend.  Update comments to reflect
 1493: 	reality.  DTRT with pps_info.  Do some overflow checks.
 1494: 	From: Dave Mills.
 1495: 
 1496: 2000-09-21  Harlan Stenn  <stenn@whimsy.udel.edu>
 1497: 
 1498: 	* configure.in: Much improved Solaris patch-level check for the
 1499: 	FLL bug test.
 1500: 	From: Marc.Brett@westgeo.com
 1501: 
 1502: 2000-09-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 1503: 
 1504: 	* include/Makefile.am (noinst_HEADERS): Added ntp_tty.h
 1505: 	Reported by Dave Mills
 1506: 
 1507: 2000-09-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 1508: 
 1509: 	* ntptrace/ntptrace.c:
 1510: 	* ntpdate/ntptimeset.c (receive):
 1511: 	* ntpdate/ntpdate.c (receive):
 1512: 	STRATUM cleanup
 1513: 	* ntpd/refclock_atom.c (atom_poll): Autostratum.  Lose the leap.
 1514: 	* ntpd/ntp_proto.c: sys_prefer
 1515: 	(process_packet): stratum cleanup
 1516: 	(clock_select): Autostratum the ATOM
 1517: 	* ntpd/ntp_loopfilter.c: pps_update/pps_stratum wiggle.
 1518: 	* include/ntpd.h: Lose pps_update, gain sys_prefer
 1519: 	* include/ntp.h: STRATUM variable cleanup
 1520: 	From Dave Mills
 1521: 
 1522: 2000-09-13  Harlan Stenn  <stenn@whimsy.udel.edu>
 1523: 
 1524: 	* ntpd/refclock_oncore.c (oncore_get_timestamp): Print debug
 1525: 	messages being aware of HAVE_STRUCT_TIMESPEC.
 1526: 
 1527: 	* ntpd/refclock_atom.c: Have pps_params tag along in the ppsunit
 1528: 	structure, where it really belongs.
 1529: 	(atom_pps): Use PPS_CAPTURE{ASSERT,CLEAR}
 1530: 	From: Dave Mills.
 1531: 
 1532: 2000-09-12  Harlan Stenn  <stenn@whimsy.udel.edu>
 1533: 
 1534: 	* configure.in (ac_cv_var_atom_ok): Cleanup ATOM/PPSAPI stuff...
 1535: 
 1536: 	* scripts/ntp-close: Find "close" ntp servers.
 1537: 	From: Neal McBurnett <neal@bcn.boulder.co.us>
 1538: 
 1539: 	* ntpd/refclock_conf.c:
 1540: 	* ntpd/refclock_oncore.c: Re-enabled oncore driver for HAVE_PPSAPI
 1541: 	case only.
 1542: 
 1543: 2000-09-12  Philippe De Muyter  <phdm@macqel.be>
 1544: 
 1545:         * ntpd/refclock_parse.c (we400a_pollinfo): Useless variable removed.
 1546:         [WHARTON slot]: Set NO_POLL, NO_INIT and NO_DATA; fix `fixed format'
 1547:         and `offset' fields.
 1548: 
 1549: 	* include/ntp_tty.h: New file
 1550: 	* libntp/icom.c: Use it.
 1551: 
 1552: 	* ntp_update (UPDATE_OPTIONS): Use -d, too.  Fix Pass 1 comment.
 1553: 
 1554: 2000-09-12  Harlan Stenn  <stenn@whimsy.udel.edu>
 1555: 
 1556: 	* ntpd/refclock_oncore.c: shmem_fname added.  oncore_init_shmem()
 1557: 	updated.
 1558: 	(oncore_start): Comment cleanup
 1559: 	(oncore_read_config): Move call to oncore_shmem_init()
 1560: 	(oncore_init_shmem): Prototype change
 1561: 	(oncore_init_shmem): Don't exit on errors
 1562: 	(oncore_msg_any): timespec/timeval cleanup
 1563: 	(oncore_msg_Cj_id): shmem_fname changes
 1564: 	(oncore_msg_BaEaHa): saw_At bugfix
 1565: 	(oncore_get_timestamp): Added current_mode/current_params.  Commented.
 1566: 	Added time_pps_getcap() calls.
 1567: 	From: Reg Clemens <reg@dwf.com>
 1568: 
 1569: 	* ntpd/ntp_io.c (input_handler): Better recvfrom() error message
 1570: 	From: Dean Gibson <timekeeper@tcp-udp.net>
 1571: 
 1572: 	* ntpdc/ntpdc.c (passwd): Get them working again.
 1573: 	From: Benjamin Greenwald <beng@lcs.mit.edu>
 1574: 
 1575: 2000-09-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 1576: 
 1577: 	* ntpd/refclock_atom.c:
 1578: 	(atom_start):
 1579: 	* ntpd/ntp_refclock.c: Comment cleanup.  PPS/PPSAPI cleanup
 1580: 	(refclock_open): PPS/PPSAPI cleanup
 1581: 	From: Dave Mills
 1582: 
 1583: 	* ntpd/refclock_oncore.c:
 1584: 	* ntpd/refclock_mx4200.c:
 1585: 	HAVE_TIMESPEC -> HAVE_STRUCT_TIMESPEC
 1586: 
 1587: 	* configure.in: ATOM requires struct timespec, not PPSAPI.  Clean
 1588: 	up dependencies accordingly.
 1589: 
 1590: 2000-09-09  Harlan Stenn  <stenn@whimsy.udel.edu>
 1591: 
 1592: 	* configure.in (ac_cv_var_atom_ok): Improve ATOM configure message
 1593: 	PARSE requires ATOM.
 1594: 
 1595: 	* ntpd/ntpd.c (set_process_priority): Clean up debug messages.
 1596: 
 1597: 2000-09-07  Harlan Stenn  <stenn@whimsy.udel.edu>
 1598: 
 1599: 	* configure.in: ac_cv_atom_ok, depends on HAVE_PPSAPI.
 1600: 	I notice the PARSE clocks require ATOM.  Could be interesting...
 1601: 
 1602: 2000-09-06  Harlan Stenn  <stenn@whimsy.udel.edu>
 1603: 
 1604: 	* Makefile.in (distdir): Seems to be a bug in an automake library
 1605: 	somewhere...
 1606: 
 1607: 2000-09-05  Harlan Stenn  <stenn@whimsy.udel.edu>
 1608: 
 1609: 	* ntpd/ntp_loopfilter.c (loop_config): V3 API needs MOD_BITS when
 1610: 	initializing ntv.modes.  Initialize ntv.{maxerror,esterror,status}
 1611: 	earlier.  Clean up KERNEL_PLL code.
 1612: 
 1613: 2000-09-04  Harlan Stenn  <stenn@whimsy.udel.edu>
 1614: 
 1615: 	* ntpq/ntpq.c: report offset as "offset", not "phase".  Lose
 1616: 	compliance.
 1617: 	* ntpd/refclock_local.c (local_poll): variance -> jitter
 1618: 	* ntpd/refclock_chu.c (chu_major): Lose variance.
 1619: 	* ntpd/ntp_util.c (hourly_stats): sys_error -> sys_jitter
 1620: 	(record_loop_stats): ditto
 1621: 	* ntpd/ntp_request.c (peer_info): variance -> jitter
 1622: 	* ntpd/ntp_refclock.c (refclock_sample): variance -> jitter
 1623: 	(refclock_receive): variance -> jitter
 1624: 	* ntpd/ntp_proto.c (process_packet): variance -> jitter
 1625: 	(clock_filter): variance -> jitter
 1626: 	(clock_select): variance -> jitter
 1627: 	(root_distance): variance -> jitter
 1628: 	* ntpd/ntp_peer.c (newpeer): variance -> jitter
 1629: 	* ntpd/ntp_loopfilter.c: Cleanup pll_nano selection bogon.
 1630: 	Centralize the kernel API data.
 1631: 	(local_clock): Lose sys_error.
 1632: 	(loop_config): Code cleanup.
 1633: 	* ntpd/ntp_control.c: Call offset "offset" and not "phase". Lose
 1634: 	CS_COMPLIANCE.  Deal with variance/jitter rename.
 1635: 	* include/ntp_refclock.h: Rename variance to jitter in struct
 1636: 	refclockproc.
 1637: 	* include/ntp_control.h (CS_COMPLIANCE): Lose it.
 1638: 	* include/ntp.h: Rename variance to jitter in struct peer.
 1639: 	From: Dave Mills
 1640: 
 1641: 2000-09-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 1642: 
 1643: 	* ntpd/refclock_atom.c: Use the new ppsunit.  Cleanup and improve
 1644: 	documentation.
 1645: 	* ntpd/ntp_refclock.c (refclock_sample): Don't accumulate
 1646: 	variance.
 1647: 	From Dave Mills
 1648: 
 1649: 2000-08-31  Harlan Stenn  <stenn@whimsy.udel.edu>
 1650: 
 1651: 	* html/driver22.htm: Update the docs.
 1652: 	* ntpd/refclock_atom.c (atom_start): Open the device if it hasn't
 1653: 	been opened already.
 1654: 	(pps_sample): Make it more visible.
 1655: 	From Dave Mills.
 1656: 
 1657: 	* configure.in: 4.0.99k8
 1658: 
 1659: 	Revert to the older automake.
 1660: 
 1661: 	* configure.in: The PPSAPI headers use "inline", so require a STDC
 1662: 	compiler.
 1663: 
 1664: 	* ntpd/refclock_atom.c (atom_shutdown): Typo
 1665: 	From Dave Mills
 1666: 
 1667: 	* configure.in: Convert to autoconf-2.49
 1668: 
 1669: 	* ntpd/refclock_atom.c: Header cleanup Comment cleanup.  Lose the
 1670: 	TTYCLK stuff.  Convert to PPSAPI.
 1671: 	* ntpd/ntp_refclock.c (refclock_newpeer): Move refclock_unpeer().
 1672: 	From: Dave Mills
 1673: 
 1674: 2000-08-29  Harlan Stenn  <stenn@whimsy.udel.edu>
 1675: 
 1676: 	* configure: Fix the autoconf problem...
 1677: 
 1678: 2000-08-20  Harlan Stenn  <stenn@whimsy.udel.edu>
 1679: 
 1680: 	* configure.in: 99k7
 1681: 
 1682: 	* util/ntptime.c (main): Report TAI stuff
 1683: 	* ntpq/ntpq.c: CS_COMPLIANCE/CS_JITTER cleanup
 1684: 	* ntpd/ntp_loopfilter.c (local_clock): sys_error/sys_jitter cleanup.
 1685: 	kernel PPL cleanup.
 1686: 	* ntpd/ntp_crypto.c: Check NTP_API if we're doing KERNEL_PLL so we
 1687: 	can get the TAI stuff.
 1688: 	* ntpd/ntp_control.c: CS_COMPLIANCE now reports "error" instead of
 1689: 	"jitter".  CS_JITTER now reports jitter.
 1690: 	* include/ntpd.h: Added sys_jitter
 1691: 	* include/ntp_control.h (CS_JITTER): Added
 1692: 	From: Dave Mills
 1693: 
 1694: 	* ntpd/cmd_args.c (getCmdOpts): Crack -N at pre-scan, as we do the
 1695: 	priority wiggle before the final scan.
 1696: 	From: Tom Smith <smith@cag.lkg.dec.com>
 1697: 	We might do better to move the priority wiggle to after the final
 1698: 	scan.  Especially if we want to permit command-line options to
 1699: 	have decent control over the priority.  When we rewrite the config
 1700: 	file stuff we might go to a multi-scan to solve some of these
 1701: 	problems.
 1702: 
 1703: 2000-08-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 1704: 
 1705: 	* configure.in: '99k6, and manually fix configure.
 1706: 
 1707: 	* include/ntp_request.h (NTP_MAXHOSTNAME): 144 -> 32
 1708: 
 1709: 2000-08-18  Harlan Stenn  <stenn@whimsy.udel.edu>
 1710: 
 1711: 	* util/ntp-genkeys.c (main): Don't call fclose if stream is NULL.
 1712: 
 1713: 2000-08-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 1714: 
 1715: 	* html/driver35.htm:
 1716: 	* ntpd/refclock_pcf.c: Updates and improvements
 1717: 	From: Andreas Voegele <andreas.voegele@gmx.de>
 1718: 
 1719: 	* configure.in (ac_cv_struct_ntptimeval): Lose the TAI check - we
 1720: 	don't need it since we can check NTP_API.  Re-hack the generated
 1721: 	configure script.
 1722: 
 1723: 	* configure: Manual hack to the ntptimeval.time.tv_nsec stuff
 1724: 	because we're running an old autoconf.
 1725: 
 1726: 2000-08-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 1727: 
 1728: 	* util/ntptime.c: Use: HAVE_STRUCT_NTPTIMEVAL_TIME_TV_NSEC, it's
 1729: 	the standard name.
 1730: 
 1731: 	* configure.in: Look for struct ntptimeval.tai in sys/timex.h
 1732: 	Cleanup struct tptimeval member tests.
 1733: 
 1734: 	* util/ntp-genkeys.c: New command-line arguments
 1735: 
 1736: 2000-08-14  Harlan Stenn  <stenn@whimsy.udel.edu>
 1737: 
 1738: 	* util/ntp-genkeys.c (main): More small steps...
 1739: 
 1740: 2000-08-13  Harlan Stenn  <stenn@whimsy.udel.edu>
 1741: 
 1742: 	* ntpd/ntp_crypto.c (crypto_rsa): Now that we're using
 1743: 	NTP_KEYSDIR, make sure there is a '/ between the dir and the file.
 1744: 
 1745: 	* util/ntp-genkeys.c (main): More small steps...
 1746: 
 1747: 2000-08-12  Harlan Stenn  <stenn@whimsy.udel.edu>
 1748: 
 1749: 	* util/ntp-genkeys.c (main): Another small step...
 1750: 
 1751: 	* configure.in: 99k5
 1752: 
 1753: 	* include/ntp_request.h: Make data[] member of req_pkt 32 again.
 1754: 	Bump the version number...
 1755: 
 1756: 	* ntpd/ntp_loopfilter.c (local_clock): Change 0. to 0 in a couple
 1757: 	of places.
 1758: 	From Dave Mills
 1759: 
 1760: 2000-08-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 1761: 
 1762: 	* util/ntp-genkeys.c (main): Minimal progress...
 1763: 
 1764: 2000-08-06  Harlan Stenn  <stenn@whimsy.udel.edu>
 1765: 
 1766: 	* ntpd/check_y2k.c: Make debug definition match ntpd.h's declaration
 1767: 
 1768: 	* ntpd/Makefile.am (check-local): Use test in favor of [
 1769: 
 1770: 2000-08-05  Harlan Stenn  <stenn@whimsy.udel.edu>
 1771: 
 1772: 	* configure.in (NTP_KEYSDIR): Typo
 1773: 
 1774: 2000-08-04  Harlan Stenn  <stenn@whimsy.udel.edu>
 1775: 
 1776: 	* ElectricFence/Makefile.am (check-local): use test instead of [
 1777: 
 1778: 	* configure.in: AC_REPLACE_FUNCS(strdup)
 1779: 	* libntp/strdup.c (strdup): Added.
 1780: 	* libntp/Makefile.am (EXTRA_libntp_a_SOURCES): Added strdup.c
 1781: 
 1782: 	* util/Makefile.am (ntp_genkeys_DEPENDENCIES): Use $U on .o files
 1783: 	(ntp_genkeys_LDADD): ditto.
 1784: 
 1785: 	* ntpd/ntp_crypto.c: Use NTP_KEYSDIR
 1786: 
 1787: 	* util/ntp-genkeys.c (snifflink): Ignore ENOENT, too.
 1788: 
 1789: 	* ntpd/ntp_proto.c (peer_xmit): Crypto cleanup
 1790: 	* ntpd/ntp_crypto.c: Cleanup
 1791: 	* ntpd/ntp_control.c: Join the club
 1792: 	* ntpd/ntp_config.c: Call crypto_config() instead; we got rid of
 1793: 	crypto_flags.
 1794: 	* include/ntp_crypto.h (CRYPTO_FLAG_ENAB): New crypto flags, rework
 1795: 	* include/ntp_control.h (CS_FLAGS): Wiggle in.
 1796: 	* include/ntp.h: Added crypto peer status to struct peer
 1797: 	From Dave Mills
 1798: 
 1799: 2000-08-03  Harlan Stenn  <stenn@whimsy.udel.edu>
 1800: 
 1801: 	* util/ntp-genkeys.c: Initialize path_keysdir to NTP_KEYSDIR.
 1802: 
 1803: 	* configure.in (NTP_KEYSDIR): Added
 1804: 	* acinclude.m4: Added AC_DEFINE_DIR macro
 1805: 
 1806: 	* util/ntp-genkeys.c (main): Sanity checks on the file paths.
 1807: 
 1808: 2000-08-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 1809: 
 1810: 	* util/ntp-genkeys.c (crypto_config): Only #ifdef PUBKEY
 1811: 	(PATH_MAX): Try harder...
 1812: 
 1813: 2000-08-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 1814: 
 1815: 	* util/ntp-genkeys.c (main): Use snifflink()
 1816: 	(snifflink): Implement...
 1817: 
 1818: 	* configure.in: Check for readlink()
 1819: 
 1820: 2000-07-31  Harlan Stenn  <stenn@whimsy.udel.edu>
 1821: 
 1822: 	* util/ntp-genkeys.c (main): Use strdup on the tokens returned
 1823: 	from ntp_config...
 1824: 	(crypto_config): Fix a typo...
 1825: 	(crypto_config): Even more...
 1826: 	(usage): Flesh it out.
 1827: 
 1828: 	* include/ntp_config.h:
 1829: 	* ntpd/ntp_config.c: Move a whack of #defines to ntp_config.h so
 1830: 	ntp-genkeys.c can see them, too.
 1831: 
 1832: 	* util/ntp-genkeys.c: Add stubs to work with ../ntpd/ntp_config.o,
 1833: 	start hooking things up.
 1834: 	(main): debugging
 1835: 	(crypto_config): better implementation
 1836: 
 1837: 
 1838: 	* ntpd/ntp_config.c (getconfig):
 1839: 	* ntpd/ntpd.c: Initialize "debug" here, not in ntp_config.c
 1840: 
 1841: 	* util/Makefile.am (ntp_genkeys_LDADD): Added ../ntpd/ntp_config.o
 1842: 	* util/Makefile.am (ntp_genkeys_DEPENDENCIES): Added.
 1843: 
 1844: 2000-07-30  Harlan Stenn  <stenn@whimsy.udel.edu>
 1845: 
 1846: 	* configure.in: 4.0.99k4
 1847: 	* util/ntp-genkeys.c: Start hacking for new functionality.
 1848: 	* include/Makefile.am (noinst_HEADERS): Added ntp_cmdargs.h and
 1849: 	ntp_config.h .
 1850: 	* ntpd/ntp_config.c: Grab ntp_cmdargs.h.  Make some new globals
 1851: 	(ugh), move ntpd-specific variables and code to cmd_args.c .
 1852: 	* ntpd/cmd_args.c: Move command argument processing functions from
 1853: 	ntp_config.c to this file.
 1854: 	* ntpd/Makefile.am (ntpd_SOURCES): Added cmd_args.c
 1855: 	* include/ntpd.h: Move getstartup() to ntp_cmdargs.h
 1856: 	* include/ntp_cmdargs.h: New file
 1857: 	Begin the hacking fest to make it easier for ntp-genkeys to use
 1858: 	ntpd's config processing code.  I really hope this is the lesser
 1859: 	of the evils...
 1860: 
 1861: 2000-07-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 1862: 
 1863: 	* util/ntp-genkeys.c (usage): Added.
 1864: 
 1865: 	* ntpd/ntp_crypto.c: Cleanup
 1866: 	* ntpd/ntp_proto.c (transmit): Add some parens.
 1867: 	(peer_xmit): Add ntohl when grabbing sndauto.seq for broadcast.
 1868: 	* ntpd/ntp_peer.c (findpeer): Cleanup
 1869: 	* ntpd/ntp_loopfilter.c (local_clock): Typo
 1870: 	From Dave Mills
 1871: 
 1872: 	* include/ntp_config.h: Created
 1873: 
 1874: 	* util/ntp-genkeys.c: Always build, but realize we may not have
 1875: 	RSAREF.  Compile parts appropriately.
 1876: 
 1877: 	* util/Makefile.am (bin_PROGRAMS): Always make ntp-genkeys
 1878: 	(ntp-genkeys_LDADD): Use $LIBRSAREF instead of the "real path"
 1879: 	* configure.in: Lose MAKE_NTP_GENKEYS
 1880: 
 1881: 	* configure.in:
 1882: 	* util/ntp-genkeys.c:
 1883: 	* util/Makefile.am:
 1884: 	Renamed ntp_genkeys to ntp-genkeys.
 1885: 
 1886: 2000-07-27  Harlan Stenn  <stenn@whimsy.udel.edu>
 1887: 
 1888: 	* ntpdate/ntpdate.c (ntpdatemain): Cleanup error message.
 1889: 
 1890: 	* ntpdate/ntpdate.c (ntpdatemain): Add missing authtrust() call
 1891: 	From: Jason Heiss <jheiss@cruzeiro.ugcs.caltech.edu>
 1892: 
 1893: 	* ntpd/refclock_ulink.c (ulink_receive):
 1894: 	* ntpd/ntp_crypto.c:
 1895: 	* libntp/authparity.c:
 1896: 	Lint/noise cleanup
 1897: 	From: Marc Brett <mbrett@rgs0.london.waii.com>
 1898: 
 1899: 	* ntpd/ntp_proto.c: Specifically track manycastserver and
 1900: 	survivors
 1901: 	From: Dave Mills
 1902: 
 1903: 2000-07-26  Sven Dietrich  <sven_dietrich@trimble.com>
 1904: 
 1905: 	* ntpd/ntpd.c: remove WINNT priority adjustment to the ports/winnt area
 1906: 	where it does not clutter up the main distribution.
 1907: 
 1908: 2000-07-24  Harlan Stenn  <stenn@whimsy.udel.edu>
 1909: 
 1910: 	* ntpd/ntp_proto.c (receive): dstadr_sin needs  higher visibility
 1911: 	From: Dave Mills
 1912: 
 1913: 	* flock-build: Added baldwin
 1914: 
 1915: 	* ntpd/ntp_request.c:
 1916: 	* ntpd/ntp_proto.c:
 1917: 	* ntpd/ntp_peer.c:
 1918: 	* ntpd/ntp_io.c:
 1919: 	* ntpd/ntp_intres.c:
 1920: 	* ntpd/ntp_crypto.c (make_keylist):
 1921: 	* ntpd/ntp_control.c:
 1922: 	* ntpd/ntp_config.c (CONF_MOD_IBURST, save_resolve):
 1923: 	* include/ntpd.h (findpeerbyassoc, newpeer, peer_config, *_interface):
 1924: 	* include/ntp_request.h (CONF_FLAG_IBURST):
 1925: 	* include/ntp_crypto.h (crypto_xmit, make_keylist):
 1926: 	* include/ntp.h (FLAG_IBURST):
 1927: 	* html/release.htm:
 1928: 	* html/confopt.htm:
 1929: 	* html/assoc.htm:
 1930: 	Add iburst option, fix broadcast/multicast and some types.
 1931: 	From: Dave Mills
 1932: 
 1933: 2000-07-20  Harlan Stenn  <stenn@whimsy.udel.edu>
 1934: 
 1935: 	* scripts/Makefile.am (bin_SCRIPTS): Install ntp-wait
 1936: 
 1937: 	* configure.in: 4.0.99k
 1938: 
 1939: 2000-07-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 1940: 
 1941: 	* ntpd/ntp_proto.c (peer_xmit): PUBKEY cleanup
 1942: 
 1943: 2000-07-18  Harlan Stenn  <stenn@whimsy.udel.edu>
 1944: 
 1945: 	* configure.in: 4.0.99j5
 1946: 
 1947: 	* html/ntpd.htm (HREF): Document other missing command-line options
 1948: 
 1949: 	* html/ntpd.htm (HREF): Document
 1950: 	* html/confopt.htm (href): Undocument
 1951: 	* ntpd/ntp_config.c (getconfig): -N high for high-priority.
 1952: 	Lose the ntp.conf way of setting priority.
 1953: 
 1954: 	* ntpd/ntp_crypto.c: PUBKEY/AUTOKEY cleanup
 1955: 	From Dave Mills
 1956: 
 1957: 2000-07-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 1958: 
 1959: 	* html/confopt.htm (href): Document it.
 1960: 	* ntpd/ntp_config.c (getconfig): CONFIG_PRIORITY support
 1961: 	* ntpd/ntpd.c (set_process_priority): Use it.
 1962: 
 1963: 	* ntpd/ntp_crypto.c: Crypto key stuff
 1964: 	* ntpd/ntp_proto.c: pubkey -> pubkey.ptr
 1965: 	* ntpd/ntp_control.c (ctl_putpeer): fstamp -> pubkey.fstamp
 1966: 	* ntpd/ntp_peer.c:
 1967: 	* include/ntpd.h:
 1968: 	* include/ntp_types.h:
 1969: 	* include/ntp_request.h:
 1970: 	* include/ntp_crypto.h:
 1971: 	* include/ntp_control.h:
 1972: 	* include/ntp.h: Type cleanup
 1973: 	From: Dave Mills
 1974: 
 1975: 2000-07-14  Harlan Stenn  <stenn@whimsy.udel.edu>
 1976: 
 1977: 	* ElectricFence/Makefile.am (check-local): Don't run the tests if
 1978: 	we didn't build the programs...
 1979: 	(check-local): Same, but watch the return codes...
 1980: 
 1981: 	* ElectricFence/page.c: #include config.h if it's there.
 1982: 	Properly handle the sys_errlist declaration.
 1983: 
 1984: 	* html/ntpq.htm:
 1985: 	* html/index.htm:
 1986: 	* html/debug.htm:
 1987: 	* html/authopt.htm:
 1988: 	Reality check.
 1989: 	From Dave Mills
 1990: 
 1991: 2000-07-13  Harlan Stenn  <stenn@whimsy.udel.edu>
 1992: 
 1993: 	* Makefile.am (SUBDIRS): Added ElectricFence
 1994: 	* configure.in (AC_CONFIG_FILES): Added ElectricFence support
 1995: 	* ElectricFence: Imporpted.
 1996: 
 1997: 2000-07-12  Harlan Stenn  <stenn@whimsy.udel.edu>
 1998: 
 1999: 	* util/ntp_genkeys.c (main): Cleanup
 2000: 	* ntpd/refclock_wwv.c (wwv_qrz): sqrt -> SQRT
 2001: 	* ntpd/refclock_chu.c (chu_rf): sqrt -> SQRT
 2002: 	* ntpd/ntpd.c (set_process_priority): Disable  high-priority for now.
 2003: 	PUBKEY cleanup.
 2004: 	* ntpd/ntp_timer.c: sys_revoketime cleanup.
 2005: 	* ntpd/ntp_proto.c (receive): PUBKEY cleanup.  Comment and code
 2006: 	cleanup.
 2007: 	(process_packet): Comment and code (PUBKEY) cleanup.
 2008: 	(peer_xmit): Comment and code cleanup.
 2009: 	(fast_xmit): Comment and code cleanup.
 2010: 	* ntpd/ntp_peer.c (expire_all): revoketime cleanup.  PUBKEY cleanup.
 2011: 	* ntpd/ntp_crypto.c: Comment reorg.  DH parameters are now
 2012: 	file-static instead of local to subroutines.
 2013: 	(make_keylist): peer->pcookie.key cleanup/fix
 2014: 	(crypto_recv): Subroutine documentation cleanup, other cleanup
 2015: 	(crypto_xmit): Cleanup/document.
 2016: 	(crypto_setup): Cleanup/document.
 2017: 	(crypto_agree): Cleanup/document.
 2018: 	(crypto_rsa): now static
 2019: 	(crypto_dh): now static.  Comment cleanup.  Code cleanup.
 2020: 	(crypto_tai): now static.  Code and comment cleanup.
 2021: 	(crypto_config): Deal with CRYPTO_CONF_LEAP.
 2022: 	* ntpd/ntp_control.c (CS_DHPARAMS): Rename corresponding token to
 2023: 	"params".  Remove CS_TAI from def_sys_var[].
 2024: 	(ctl_putsys): CS_HOST, CS_DHPARAMSm CS_REVTIME, and CS_LEAPTIME
 2025: 	bugfix.  CS_TAI cleanup.
 2026: 	* ntpd/ntp_config.c (CONF_CRYPTO_LEAP): Added
 2027: 	(getconfig): Added CONF_CRYPTO_LEAP support.
 2028: 	* include/ntp_syslog.h: Lose GIZMO stuff.
 2029: 	* include/ntp_crypto.h (CRYPTO_CONF_LEAP): Added
 2030: 	* include/ntp.h: struct autokey, cookie,value, and pkt changes for
 2031: 	signature field.  Update the inline docs on pkt's exten field.
 2032: 	From: Dave Mills
 2033: 
 2034: 
 2035: 2000-07-08  Harlan Stenn  <stenn@whimsy.udel.edu>
 2036: 
 2037: 	* ntpd/ntp_util.c (stats_config): If we read a bogus old_drift,
 2038: 	use 0 instead of failing.
 2039: 
 2040: 2000-07-03  Harlan Stenn  <stenn@whimsy.udel.edu>
 2041: 
 2042: 	* README.cvs: Cleanup.
 2043: 
 2044: 	* ntpd/refclock_datum.c (datum_pts_poll): index -> unit_index
 2045: 	* ntpd/ntp_resolver.c (findhostaddr): const cleanup
 2046: 	* libntp/recvbuff.c:
 2047: 	* libntp/msyslog.c:
 2048: 	* libntp/emalloc.c:
 2049: 	* libntp/authreadkeys.c:
 2050: 	Fix header order.
 2051: 	From: Simon Burge <simonb@netbsd.org>
 2052: 
 2053: 	* ntpd/ntp_util.c (stats_config): Use HAVE_FINITE and HAVE_ISFINITE
 2054: 	* configure.in (ac_cv_struct_ntptimeval_timespec): isfinite()
 2055: 	checks for HP-UX11.
 2056: 	From: Albert Chin-A-Young <china@thewrittenword.com>
 2057: 
 2058: 2000-07-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 2059: 
 2060: 	* flock-build (LIST): Lose malarky, update some machine/OS descriptions
 2061: 
 2062: 	* configure.in: 4.0.99j4
 2063: 
 2064: 	* ntpq/ntpq.c: Lose PUBKEY stuff - older ntpq's will complain when
 2065: 	they see the info in a packet.
 2066: 	* ntpd/ntp_proto.c (peer_xmit): TAI changes.
 2067: 	* ntpd/ntp_crypto.c: Fix host/network byteorder stuff.  Follow
 2068: 	global->struct changes.  TAI changes.  Bugfixes.
 2069: 	* ntpd/ntp_control.c: Follow field reorder/rename.
 2070: 	* include/ntp_crypto.h: Move crypto stuff from separate globals
 2071: 	into structs.
 2072: 	* include/ntp_control.h (CS_HOST): Reorder/rename some fields
 2073: 	From: Dave Mills
 2074: 
 2075: 2000-06-30  Harlan Stenn  <stenn@whimsy.udel.edu>
 2076: 
 2077: 	* ntpd/ntp_peer.c (unpeer): Moved keystr cleanup inside ifdef PUBKEY
 2078: 
 2079: 	* configure.in: 4.0.99j3
 2080: 
 2081: 	* html/release.htm:
 2082: 	* html/ntpq.htm:
 2083: 	* html/authopt.htm:
 2084: 	Updates from Dave Mills
 2085: 
 2086: 	* ntpd/ntp_request.c (dns_a): Don't call crypto_public for now...
 2087: 	* ntpd/ntp_proto.c (receive): Follow the TEST wiggles
 2088: 	(peer_xmit): TAI support
 2089: 	* ntpd/ntp_crypto.c: TAI support
 2090: 	* ntpd/ntp_control.c: CS_VERSION  and CS_TAI support
 2091: 	* include/ntp_crypto.h (CRYPTO_FLAG_TAI): Added.
 2092: 	* include/ntp_control.h (CS_VERSION): Added.
 2093: 	* include/ntp.h (TEST4,TEST5,TEST8,TEST9): Wiggle.
 2094: 	From: Dave Mills
 2095: 
 2096: 	* ntpd/Makefile.am (ntpd_SOURCES): Lose refclock_ulink331.c
 2097: 	because the new refclock_ulink.c handles it.
 2098: 
 2099: 2000-06-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 2100: 
 2101: 	* ntpd/ntp_config.c (getconfig): Sanity check the right variable
 2102: 	From: Dave Mills.
 2103: 
 2104: 2000-06-25  Harlan Stenn  <stenn@whimsy.udel.edu>
 2105: 
 2106: 	* configure.in: 4.0.99j2
 2107: 
 2108: 	* ntpd/ntp_proto.c:
 2109: 	* ntpd/ntp_peer.c:
 2110: 	* ntpd/ntp_crypto.c:
 2111: 	* include/ntp_crypto.h:
 2112: 	* include/ntp.h:
 2113: 	AUTOKEY/PUBKEY/DH/crypto changes
 2114: 	From: Dave Mills
 2115: 
 2116: 2000-06-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 2117: 
 2118: 	* html/driver34.htm:
 2119: 	* ntpd/refclock_ulink.c:
 2120: 	* ntpd/refclock_ulink331.c: (removed)
 2121: 	Updated for 320/330 series refclocks
 2122: 	From: joseph lang <tcnojl1@earthlink.net>
 2123: 
 2124: 	* ntpd/refclock_oncore.c: Patches/improvements
 2125: 	* html/driver30.htm: New release
 2126: 	From: Reg Clemens <reg@orion.dwf.com>
 2127: 
 2128: 2000-06-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 2129: 
 2130: 	* configure.in: 4.0.99j1
 2131: 
 2132: 	* ntpdc/ntpdc.c (getcmds):
 2133: 	* configure.in:
 2134: 	Readline support.
 2135: 	From: Aaron Sherman <ajs@narn.ajs.com>
 2136: 
 2137: 	* ntpd/refclock_ulink331.c: Added.
 2138: 	Sent in by Doug Grosso <dgrosso@mint.net>
 2139: 	* ntpd/Makefile.am (ntpd_SOURCES): Added refclock_ulink331.c
 2140: 
 2141: 	* libntp/snprintf.c: Added stdio.h
 2142: 	From: Marc Brett <mbrett@rgs0.london.waii.com>
 2143: 
 2144: 	* include/ntp.h: struct autokey's siglen is u_int32.  So is the
 2145: 	siglen in struct cookie.  So is siglen and value length in struct
 2146: 	value. Add fstamp to struct peer.  Resize the exten AUTOKEY field
 2147: 	in struct pkt.
 2148: 	* include/ntp_crypto.h: crypto_enable -> crypto_flags and a
 2149: 	variety of other cleanups.
 2150: 	* ntpd/ntp_config.c: crypto_enable -> crypto_flags, and some
 2151: 	key/fudge cleanup.
 2152: 	* ntpd/ntp_control.c: Much cleanup.
 2153: 	* ntpd/ntp_crypto.c: Many changes that Harlan is too tired to
 2154: 	properly document.
 2155: 	* ntpd/ntp_peer.c: crypto_enable -> crypto_flags
 2156: 	(peer_config): Hold off on crypto_public() until some resolver
 2157: 	issue is fixed.
 2158: 	* ntpd/ntp_proto.c (receive): Disable the reverse DNS lookup for now.
 2159: 	(process_packet): Don't record_raw_stats() for now.
 2160: 	crypto_enable was renamed to crypto_flags.
 2161: 	(peer_xmit): In MODE_ACTIVE or MODE_PASSIVE, only call
 2162: 	crypto_xmit() if the peer->cmmd is not CRYPTO_AUTO.  Reset
 2163: 	peer->cmmd to 0 when we're thru.
 2164: 	Don't reset peer->cmmd to 0 until the end of MODE_CLIENT.
 2165: 	* ntpd/ntpd.c: Lose the call to crypto_init().  Instead, call
 2166: 	crypto_setup() later on if we have crypto_flags.
 2167: 	* util/ntp_genkeys.c: Lose GENLEN; use PRIMELEN/2 .
 2168: 	From Dave Mills.
 2169: 
 2170: 	* ntpd/ntp_crypto.c (crypto_rsa):
 2171: 	(crypto_dh):
 2172: 	Do some debug logging if readlink() fails with something other
 2173: 	than EINVAL (file isn't a symlink).
 2174: 
 2175: 2000-06-04  James R. Van Zandt  <jrv@vanzandt.mv.com>
 2176: 
 2177: 	* html/miscopt.htm (trap): punctuation
 2178: 
 2179: 	* html/ntpd.htm (-g): typo
 2180: 
 2181: 	* html/miscopt.htm (logconfig): List the "clock" event class.
 2182: 	"allprefix" should be two words.
 2183: 
 2184: 2000-05-31  Harlan Stenn  <stenn@whimsy.udel.edu>
 2185: 
 2186: 	* ntpd/ntp_timer.c: Protect <unistd.h>
 2187: 
 2188: 2000-05-30  Harlan Stenn  <stenn@whimsy.udel.edu>
 2189: 
 2190: 	* ntpd/Makefile.am: Document what we expect from -lm
 2191: 
 2192: 2000-05-29  Harlan Stenn  <stenn@whimsy.udel.edu>
 2193: 
 2194: 	* configure.in: 4.0.99j
 2195: 
 2196: 2000-05-22  Harlan Stenn  <stenn@whimsy.udel.edu>
 2197: 
 2198: 	* html/ntptime.htm: More fixes
 2199: 	From: Kazu TAKAMUNE <takamune@avrl.mei.co.jp>
 2200: 
 2201: 2000-05-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 2202: 
 2203: 	* build (KEYSUF):
 2204: 	* flock-build:
 2205: 	* configure.in: Lose the "md5" options from the --with-crypto
 2206: 	check; Dave hates it.
 2207: 
 2208: 	* ntpd/ntp_util.c (stats_config):
 2209: 	* ntpd/ntp_loopfilter.c (loop_config):
 2210: 	* libntp/systime.c (adj_systime):
 2211: 	* include/ntp_proto.h (NTP_MAXFREQ):
 2212: 	Renamed MAX_FREQ to NTP_MAXFREQ
 2213: 
 2214: 	* ntpd/ntpd.c (ntpdmain):
 2215: 	* ntpd/ntp_proto.c (receive):
 2216: 	(poll_update):
 2217: 	* ntpd/ntp_intres.c (addentry):
 2218: 	* ntpd/ntp_config.c (getconfig):
 2219: 	Lint cleanup
 2220: 	From: Marc Brett <mbrett@rgs0.london.waii.com>
 2221: 
 2222: 	* include/ntp_stdlib.h:
 2223: 	* libntp/systime.c (adj_systime):
 2224: 	* ntpd/ntp_loopfilter.c (loop_config):
 2225: 	* ntpd/ntp_util.c (stats_config):
 2226: 	* ports/winnt/ntpd/nt_clockstuff.c (adj_systime):
 2227: 	MAXFREQ -> MAX_FREQ
 2228: 	* include/ntp_proto.h: Define MAX_FREQ
 2229: 
 2230: 2000-05-15  Harlan Stenn  <stenn@whimsy.udel.edu>
 2231: 
 2232: 	* include/ntp_stdlib.h:
 2233: 	* libntp/systime.c (adj_systime):
 2234: 	* ntpd/ntp_loopfilter.c (loop_config):
 2235: 	* ntpd/ntp_util.c (stats_config):
 2236: 	* ports/winnt/ntpd/nt_clockstuff.c (adj_systime):
 2237: 	sys_maxfreq -> MAXFREQ
 2238: 	Per Dave Mills.
 2239: 
 2240: 2000-05-14  Harlan Stenn  <stenn@whimsy.udel.edu>
 2241: 
 2242: 	* acinclude.m4: Typo...
 2243: 
 2244: 2000-05-13  Harlan Stenn  <stenn@whimsy.udel.edu>
 2245: 
 2246: 	* libntp/gpstolfp.c (GPSORIGIN): Try new ULONG_CONST macro
 2247: 
 2248: 	* ntpdate/ntptimeset.c:
 2249: 	* ntpdate/ntpdate.h:
 2250: 	* ntpd/refclock_oncore.c (oncore_msg_En):
 2251: 	* ntpd/ntp_util.c (stats_config):
 2252: 	* ntpd/ntp_request.c:
 2253: 	* ntpd/ntp_intres.c (findhostaddr):
 2254: 	* ntpd/ntp_config.c (getconfig):
 2255: 	* libntp/systime.c (adj_systime):
 2256: 	* libntp/lib_strbuf.c:
 2257: 	* libntp/authparity.c:
 2258: 	* libntp/audio.c:
 2259: 	Header/lint cleanup
 2260: 	From/reported by: Simon Burge <simonb@netbsd.org>
 2261: 
 2262: 	* ntpd/ntp_resolver.c (findhostaddr): Compiler noise cleanup
 2263: 
 2264: 	* ntpd/ntp_intres.c: Compiler noise cleanup
 2265: 
 2266: 	* html/ntptime.htm: Document reality check
 2267: 	From: Kazu TAKAMUNE <takamune@avrl.mei.co.jp>
 2268: 
 2269: 2000-05-12  Harlan Stenn  <stenn@whimsy.udel.edu>
 2270: 
 2271: 	* ntpd/ntp_intres.c (ntp_intres): Quiet some debug messages
 2272: 	Reported by: Brian Bergstrand <brianb@mac.com>
 2273: 
 2274: 2000-05-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 2275: 
 2276: 	* scripts/mkver.in (ConfStr): Use -r if we're using RSAREF,
 2277: 	otherwise use -a if we're using autokey, otherwise use no extra
 2278: 	suffix.
 2279: 
 2280: 2000-05-11  Sven Dietrich  <sven_dietrich@trimble.com>
 2281: 
 2282: 	* ports/winnt/include/config.h: New defines to support AUTOKEY
 2283: 	* ports/winnt/include/unistd.h: Added another dummy placeholder.h
 2284: 	* ports/winnt/ntpd/ntpd.dsp: Added ntp_crypt.c to makefile
 2285: 	* ports/winnt/ntpd/ntpd.c: service_main needs a local hostname[]
 2286: 	* html/hints/winnt.htm: Add remark about 4.0.99i not compiling.
 2287: 	These changes got WINNT running again. No idea if the keys stuff
 2288: 	works however.
 2289: 
 2290: 2000-05-10  Harlan Stenn  <stenn@whimsy.udel.edu>
 2291: 
 2292: 	* configure.in: 4.0.99i9
 2293: 
 2294: 	* ntpd/ntp_crypto.c: tstamp and autokey cleanup
 2295: 	From: Dave Mills
 2296: 
 2297: 	* ntpd/ntp_proto.c (clock_update): Only call expire_all() if
 2298: 	AUTOKEY
 2299: 	From many folks, including Reg Clemens <reg@dwf.com>
 2300: 
 2301: 2000-05-07  Harlan Stenn  <stenn@whimsy.udel.edu>
 2302: 
 2303: 	* configure.in: 4.0.99i8
 2304: 
 2305: 	* flock-build: Use new --with-crypto choices
 2306: 	* build (KEYSUF): Deal with new --with-crypto
 2307: 	* configure.in: --with-crypto={md5,autokey,rsaref};
 2308: 	lose --enable-autokey
 2309: 
 2310: 2000-05-06  Harlan Stenn  <stenn@whimsy.udel.edu>
 2311: 
 2312: 	* build (KEYSUF): Catch --disable-autokey first.
 2313: 
 2314: 2000-05-05  Harlan Stenn  <stenn@whimsy.udel.edu>
 2315: 
 2316: 	* flock-build: If we don't use autokey, don't use rsaref either.
 2317: 
 2318: 	* configure.in: 4.0.99i7
 2319: 
 2320: 	* build (KEYSUF):
 2321: 	* flock-build:
 2322: 	It's --disable-autokey now
 2323: 
 2324: 	* configure.in: MD5 is not optional (but AUTOKEY is)
 2325: 	* include/ntp_stdlib.h:
 2326: 	* libntp/a_md5encrypt.c:
 2327: 	* libntp/authkeys.c:
 2328: 	(authhavekey):
 2329: 	(MD5auth_setkey):
 2330: 	(auth_delkeys):
 2331: 	(authencrypt):
 2332: 	(authdecrypt):
 2333: 	* libntp/authreadkeys.c:
 2334: 	(authreadkeys):
 2335: 	* ntpd/ntp_proto.c (init_proto):
 2336: 	* libntp/authusekey.c:
 2337: 	MD5 is required.
 2338: 
 2339: 2000-05-04  Harlan Stenn  <stenn@whimsy.udel.edu>
 2340: 
 2341: 	* configure.in: 4.0.99i6
 2342: 
 2343: 	* ntpd/ntp_proto.c (transmit): Fix up the UNREACH code.
 2344: 	(receive): Lose some debug code.
 2345: 	(clock_update): expire_all() if LEAP_NOTINSYNC
 2346: 	crypto_xmit() a CRYPTO_AUTO if !FLAG_AUTOKEY instead of recauto.tstamp
 2347: 	crypto_xmit() a CRYPTO_PRIV (not CRYPTO_AUTO) based on pcookie.tstamp
 2348: 	crypto_xmit() a CRYPTO_AUTO (not CRYPTO_PRIV) based on FLAG_MCAST2
 2349: 	and !FLAG_AUTOKEY
 2350: 	* ntpd/ntp_crypto.c (crypto_recv): Clean up debug output.
 2351: 	Don't AUTOKEY if FLAG_MCAST2
 2352: 	From: Dave Mills
 2353: 
 2354: 	* flock-build: Also make obe withouyt md5 (no AUTOKEY)
 2355: 	* build (BDIR): Handle -noautokey build directory suffix
 2356: 	* configure.in: Prepare for AUTOKEY in mkver.in
 2357: 	* scripts/mkver.in (ConfStr): Indicate in the version string if
 2358: 	we're not using AUTOKEY.
 2359: 
 2360: 2000-05-03  Harlan Stenn  <stenn@whimsy.udel.edu>
 2361: 
 2362: 	* scripts/ntp-wait.in: Fun things with backspaces
 2363: 
 2364: 	* configure.in: 4.0.99i5
 2365: 
 2366: 	* ntptrace/ntptrace.c: Protect sys/ioctl.h; grab config.h
 2367: 
 2368: 	* ntpd/ntp_proto.c (transmit): AUTOKEY and tstamp fixes.
 2369: 	(clock_update): Check oleap against LEAP_NOTINSYNC
 2370: 	(peer_clear): Free pubkey when we're done
 2371: 	Check peer's keynumber against the seq in MODE_BROADCAST.
 2372: 	Reorder tstamp changes.
 2373: 	* ntpd/ntp_crypto.c (crypto_recv): Check the packet if we get a
 2374: 	CRYPTO_RESP and reorder the update of tstamp.
 2375: 	(crypto_recv): Don't expire the peer until we're thru with it.
 2376: 	* include/ntp.h: AUTOKEY and pkeyid changes
 2377: 	From Dave Mills
 2378: 
 2379: 	* ntpdate/ntpdate.c: Protect sys/ioctl.h
 2380: 
 2381: 2000-05-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 2382: 
 2383: 	* configure.in: 4.0.99i4
 2384: 
 2385: 	* include/ntp.h:
 2386: 	* include/ntp_crypto.h:
 2387: 	* include/ntpd.h:
 2388: 	* ntpd/ntp_crypto.c:
 2389: 	* ntpd/ntp_proto.c:
 2390: 	* ntpd/ntpd.c:
 2391: 	* util/ntp_genkeys.c:
 2392: 	Dave Mills closed some potential vulnerabilities in the key protocol.
 2393: 
 2394: 2000-04-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 2395: 
 2396: 	* configure.in: 4.0.99i3
 2397: 
 2398: 	* ntpd/ntp_proto.c: Just check tstamp, forget about sndauto.seq
 2399: 	* ntpd/ntp_crypto.c (crypto_recv): Lose inappropriate ntohl()
 2400: 	conversion on tstamp.
 2401: 	AUTOKEY if tstamp>0, not !=
 2402: 	Stash tstamp before we check pcookie.key (several places)
 2403: 	* ntpd/ntp_control.c (ctl_putpeer): In CP_INITSEQ, check
 2404: 	recauto.key, not keylist.
 2405: 	From: Dave Mills
 2406: 
 2407: 2000-04-27  Harlan Stenn  <stenn@whimsy.udel.edu>
 2408: 
 2409: 	* configure.in: 4.0.99i2
 2410: 
 2411: 	* ntpq/ntpq.c: PUBKEY stuff
 2412: 	* ntpd/ntp_proto.c (clock_select): nreach, and better survivor pick.
 2413: 	* ntpd/ntp_peer.c (newpeer): Better nextdate choice.
 2414: 	* ntpd/ntp_control.c (ctl_putsys): Buglet in CS_HOSTNAM code.
 2415: 	From Dave Mills.
 2416: 
 2417: 2000-04-24  Harlan Stenn  <stenn@whimsy.udel.edu>
 2418: 
 2419: 	* build (IAM): Show hostname if we trip a buildkey check.
 2420: 
 2421: 2000-04-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 2422: 
 2423: 	* build: deal with optional 1st argument (SIG), which must match
 2424: 	the contents of .buildkey
 2425: 
 2426: 	* flock-build: Generalize, implement SIG and .buildkey, and drive
 2427: 	list from LIST, which the user can override.
 2428: 
 2429: 2000-04-21  Harlan Stenn  <stenn@whimsy.udel.edu>
 2430: 
 2431: 	* configure.in: 4.0.99i1
 2432: 	Dave updated some docs, implemented the kpoll variable, and
 2433: 	wiggled a host/network byte order thing in the crypto key code.
 2434: 
 2435: 2000-04-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 2436: 
 2437: 	* ntpd/refclock_wwvb.c (wwvb_receive): Grab any character (instead
 2438: 	of just a space) before the DSTchar.
 2439: 	From: Dave Mills
 2440: 
 2441: 2000-04-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 2442: 
 2443: 	* configure.in: 4.0.99i
 2444: 
 2445: 	Dave made some documentation updates.
 2446: 
 2447: 2000-04-08  Harlan Stenn  <stenn@whimsy.udel.edu>
 2448: 
 2449: 	* flock-build: Add malarky.  By default, --enable-parse-clocks.
 2450: 	Start 2 builds, one with and the other without rsaref.
 2451: 
 2452: 	* configure.in: 4.0.99h6
 2453: 	Dave improved the crypto stuff some more.
 2454: 
 2455: 2000-04-05  Harlan Stenn  <stenn@whimsy.udel.edu>
 2456: 
 2457: 	* ntpd/refclock_acts.c (acts_receive): Do a better job with year
 2458: 	conversions and leap-year checks.  The PTB stuff caught this.
 2459: 	Reported by: Daniel.Aeby@eam.admin.ch
 2460: 
 2461: 2000-04-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 2462: 
 2463: 	* ntpd/refclock_atom.c (atom_pps): Bugfix
 2464: 	From: Philippe Charnier <charnier@xp11.frmug.org>
 2465: 
 2466: 2000-03-30  Harlan Stenn  <stenn@whimsy.udel.edu>
 2467: 
 2468: 	* libparse/clk_wharton.c (cvt_wharton_400a): Do not return
 2469: 	CVT_NONE when receiving the early warning bit set.
 2470: 	From: Philippe De Muyter  <phdm@macqel.be>
 2471: 
 2472: 	* configure.in: 4.0.99h5
 2473: 	Dave made more changes to the auth key stuff.
 2474: 
 2475: 2000-03-29  Harlan Stenn  <stenn@whimsy.udel.edu>
 2476: 
 2477: 	* configure.in: 4.0.99h4
 2478: 	Dave made a bunch of changes/fixes to the auth key stuff.
 2479: 
 2480: 2000-03-22  Harlan Stenn  <stenn@whimsy.udel.edu>
 2481: 
 2482: 	* ntpd/ntp_resolver.c: Typos.
 2483: 
 2484: 2000-03-21  Harlan Stenn  <stenn@whimsy.udel.edu>
 2485: 
 2486: 	* configure.in: 4.0.99h3
 2487: 
 2488: 	* ntpd/ntp_intres.c: Use LOG_INFO instead of LOG_DEBUG.
 2489: 	* ntpd/ntp_resolver.c: Ditto.
 2490: 
 2491: 2000-03-20  Harlan Stenn  <stenn@whimsy.udel.edu>
 2492: 
 2493: 	* util/Makefile.am (ntp_genkeys_LDADD): Might need snprintf (-lntp)
 2494: 
 2495: 	* librsaref/Makefile.am (stamp-rsaref): nodist_HEADERS are not
 2496: 	supoprted yet.  Hack around it.
 2497: 
 2498: 	* ntpd/ntp_resolver.c (findhostaddr): hstrerror isn't always available.
 2499: 
 2500: 	* configure.in: Look for hstrerror.
 2501: 
 2502: 	* util/ntp_genkeys.c (main): Use snprintf, not sprintf.
 2503: 
 2504: 	* ntpd/ntp_crypto.c: Use gethostname, not uname
 2505: 	* util/ntp_genkeys.c: Ditto
 2506: 	From: Dave Mills
 2507: 
 2508: 2000-03-19  Harlan Stenn  <harlan@pfcs.com>
 2509: 
 2510: 	* ntpd/ntp_proto.c (receive): Rename ntp_res_send() to
 2511: 	  ntp_res_name() and adjust the number of arguments.
 2512: 	* ntpd/ntp_resolver.c (ntp_res_name): Ditto
 2513: 	* include/ntpd.h: Ditto
 2514: 
 2515: 	* ntpd/ntp_resolver.c: Add de_done to the dns_entry structure.
 2516: 
 2517: 2000-03-18  Harlan Stenn  <stenn@whimsy.udel.edu>
 2518: 
 2519: 	* configure.in: 4.0.99h2
 2520: 
 2521: 	* libparse/Makefile.am (info_trimble.c): Use $(srcdir)/foo.sed
 2522: 	instead of foo.sed .
 2523: 
 2524: 	* librsaref/Makefile.am (stamp-rsaref): Copy each file to the build
 2525: 	directory, not to the source directory.  This sucks; it wastes
 2526: 	space (but it's more portable).
 2527: 
 2528: 	* configure.in (ac_busted_vpath_in_make): Add FreeBSD.  I bet all
 2529: 	systems that use pmake will need this.
 2530: 	(ac_busted_vpath_in_make): Remove FreeBSD - I found a workaround.
 2531: 
 2532: 	* Makefile.am: General cleanup
 2533: 
 2534: 	* configure.in: 4.0.99h1
 2535: 
 2536: 	* ntpd/ntp_resolver.c: Lose unneeded header.
 2537: 
 2538: 2000-03-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 2539: 
 2540: 	* libntp/snprintf.c: #include <config.h>
 2541: 
 2542: 	* libntp/Makefile.am (EXTRA_libntp_a_SOURCES): Use it correctly...
 2543: 
 2544: 2000-03-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 2545: 
 2546: 	* libntp/Makefile.am (EXTRA_DIST): Added snprintf.c
 2547: 
 2548: 	* configure.in: Look for (and provide if it's missing) snprintf()
 2549: 
 2550: 	* ntpd/ntp_request.c (dns_a): Call crypto_public with the resolved
 2551: 	name and the peer pointer.
 2552: 	(dns_a): crypto_public() is only available if PUBKEY is #defined.
 2553: 
 2554: 	* ntpd/ntp_crypto.c (crypto_public): sprintf is Evil.  Use snprintf.
 2555: 	(crypto_setup): Ditto
 2556: 	(crypto_read): Ditto
 2557: 
 2558: 	* ntpd/ntp_resolver.c (ntp_res_send): Lose some debugging noise.
 2559: 
 2560: 	* ntpd/ntp_config.c (getconfig): Lose testing code.
 2561: 
 2562: 	* ntpd/ntp_request.c (dns_a): Fix buglet in hostname length check.
 2563: 
 2564: 2000-03-16  Harlan Stenn  <harlan@pfcs.com>
 2565: 
 2566: 	* ntpd/ntp_request.c (dns_a): Start cracking the returned information.
 2567: 
 2568: 2000-03-15  Harlan Stenn  <stenn@whimsy.udel.edu>
 2569: 
 2570: 	* ntpd/ntp_resolver.c (ntp_res): Authenticate the keyid.
 2571: 
 2572: 	* ntpd/ntp_crypto.c (crypto_line): Fix definition
 2573: 	(crypto_read): Ditto.
 2574: 
 2575: 	* ntpd/ntp_config.c (getconfig): Move req_keyid generation here.
 2576: 
 2577: 	* librsaref/Makefile.am (BUILT_SOURCES): Cleanup more nodist_ stuff.
 2578: 
 2579: 2000-03-14  Harlan Stenn  <stenn@whimsy.udel.edu>
 2580: 
 2581: 	* build (RSASUF): If we have rsaref2/ and are building
 2582: 	--without-rsaref, note it as a build-directory suffix.
 2583: 
 2584: 	* configure.in: 4.0.99h
 2585: 	Crypto merge
 2586: 
 2587: 	* librsaref/Makefile.am (nodist_librsaref_a_SOURCES): Added nodist_
 2588: 
 2589: 2000-02-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 2590: 
 2591: 	* configure.in: Lose the changequote calls and fix the quoting.
 2592: 	Reported by: Akim Demaille <akim@epita.fr>
 2593: 
 2594: 	* ntpd/ntp_request.c: Log various error conditions.
 2595: 
 2596: 2000-02-27  Harlan Stenn  <stenn@whimsy.udel.edu>
 2597: 
 2598: 	* configure.in: 4.0.99g
 2599: 
 2600: 	* ntpd/ntpd.c: Only log EINTR if debug > 2.
 2601: 
 2602: 2000-02-25  Harlan Stenn  <stenn@whimsy.udel.edu>
 2603: 
 2604: 	* scripts/mkver.in (ConfStr): Use `-r' when configured with crypto.
 2605: 
 2606: 	* ntpd/refclock_wwvb.c (wwvb_receive): Undo the previous chagne.
 2607: 
 2608: 2000-02-24  Harlan Stenn  <stenn@whimsy.udel.edu>
 2609: 
 2610: 	* ntpd/refclock_wwvb.c (wwvb_receive): LENWWVB0 can return 6 or 7
 2611: 	fields.
 2612: 	From: Michael Sinatra <msinatra@uclink4.berkeley.edu>
 2613: 	with a cleanup from Ulrich.
 2614: 
 2615: 	* scripts/mkver.in (ConfStr): Make RSAREF appear as part of the
 2616: 	version.
 2617: 
 2618: 2000-02-21  Sven Dietrich <sven_dietrich@trimble.com>
 2619: 
 2620: 	* ports/winnt/include/config.h: Enable MD5 and RANDOM by default
 2621: 	* ports/winnt/libntp/SetSystemTime.c: Fix warning and const declaration
 2622: 	From: Carl Byington <carl@five-ten-sg.com>
 2623: 
 2624: 2000-02-21  Harlan Stenn  <stenn@whimsy.udel.edu>
 2625: 
 2626: 	* Makefile.am (SUBDIRS): Make librsaref right after includes so we
 2627: 	can copy any needed header files over.
 2628: 
 2629: 	* libntp/Makefile.am (INCLUDES): Also look in librsaref for des.h
 2630: 	* ntpd/Makefile.am (INCLUDES): Ditto
 2631: 	* util/Makefile.am (INCLUDES): Ditto
 2632: 
 2633: 	* librsaref/Makefile.am (librsaref_a_SOURCES): Use the des.h from
 2634: 	the rsaref2 distribution.
 2635: 
 2636: 	* include/Makefile.am (noinst_HEADERS): No, we don't want des.h
 2637: 
 2638: 2000-02-20  Harlan Stenn  <stenn@whimsy.udel.edu>
 2639: 
 2640: 	* include/Makefile.am (noinst_HEADERS): Add des.h
 2641: 
 2642: 2000-02-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 2643: 
 2644: 	* ntpd/ntp_config.c (do_resolve_internal): Try Real Hard to
 2645: 	generate a full random key.
 2646: 	From: Carl Byington <carl@five-ten-sg.com>
 2647: 
 2648: 	* include/ntp.h: Now we know we have either mrand48() or random().
 2649: 	* configure.in: If we have mrand48, use it.  Otherwise, use (and
 2650: 	provide if necessary) random().
 2651: 	* libntp/Makefile.am (EXTRA_DIST): random.c
 2652: 	* libntp/random.c: Added.
 2653: 
 2654: 2000-02-18  Harlan Stenn  <stenn@whimsy.udel.edu>
 2655: 
 2656: 	* librsaref/Makefile.am (stamp-rsaref): Typo
 2657: 
 2658: 	* configure.in (ac_cv_func_ctty_for_f_setown): Yes for OpenBSD
 2659: 	(ac_cv_var_ntp_syscalls): Fix quoting of description
 2660: 	From: Jonathan Rozes <jrozes@vinton.com>
 2661: 
 2662: 	* librsaref/Makefile.am: Fix stamp-rsaref dependency order.
 2663: 
 2664: 	* configure.in: 4.0.99f
 2665: 
 2666: 2000-02-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 2667: 
 2668: 	* ntpd/refclock_mx4200.c: Remove the DOP-weighted position
 2669: 	averaging code and revert to a simple mean average.  The weighted
 2670: 	average consistently produced a *worse* result.  Go figure.
 2671: 	* html/mx4200data.htm: Cleanup, reflect current reality.
 2672: 	* html/driver9.htm: Cleanup, reflect current reality.
 2673: 	* html/copyright.htm: Cleanup, and credit where credit is due.
 2674: 	From: Marc.Brett@westgeo.com
 2675: 
 2676: 	* ntpd/refclock_oncore.c: Cleanup/fixes
 2677: 	* html/driver30.htm: Cleanup
 2678: 	* html/Oncore-SHMEM.htm: Cleanup
 2679: 	From: Reg Clemens <reg@dwf.com>
 2680: 
 2681: 2000-02-16  Sven Dietrich <sven_dietrich@trimble.com>
 2682: 
 2683: 	* winnt/scripts/mkver.bat:    Frederick Czajka [w2k@austin.rr.com]
 2684: 	  winnt/ntpq/ntpq.dsp:        modified mkver.bat to eliminate the
 2685: 	  winnt/ntpd/ntpd.dsp:	      need to have Perl installed and the
 2686: 	  winnt/ntpdc/ntpdc.dsp:      PERL environment variable to be set.
 2687: 	  winnt/ntpdate/ntpdate.dsp:
 2688: 	  winnt/ntptrace/ntptrace.dsp:    Thanks, Frederick!
 2689: 
 2690: 	* ntpd/refclock_nmea.c: Correctly interpret the quality indicator.
 2691: 
 2692: 2000-02-15  Harlan Stenn  <stenn@whimsy.udel.edu>
 2693: 
 2694: 	* ntpd/refclock_nmea.c: Correctly interpret the quality indicator.
 2695: 	Deal with the time supplied in centiseconds.  GPGCA/GPGGA cleanup.
 2696: 	From: Andrew Hood <ajhood@fl.net.au>
 2697: 
 2698: 	* libparse/Makefile.am (K_CFLAGS): Use instead.  Add NEED_NTP_BOPS.
 2699: 
 2700: 2000-02-10  Harlan Stenn  <stenn@whimsy.udel.edu>
 2701: 
 2702: 	* scripts/ntp-wait.in: Intensify, including some suggestions from
 2703: 	Ulrich.
 2704: 
 2705: 	* configure.in: 4.0.99e
 2706: 
 2707: 	* scripts/ntp-wait.in: Lose cruft, sleep after each try.
 2708: 
 2709: 	* scripts/ntp-restart: It's ntpd now.  Also, call ntp-wait.
 2710: 
 2711: 	* configure.in (AC_CONFIG_*): New scripts that use PATH_PERL
 2712: 
 2713: 	* scripts/Makefile.am (noinst_SCRIPTS): Added ntp-wait
 2714: 	(noinst_SCRIPTS): Added all of the scripts that now use PATH_PERL
 2715: 
 2716: 	* configure.in: Get the path to perl
 2717: 	(AC_CONFIG_*): Added scripts/ntp-wait
 2718: 
 2719: 	* ntptrace/ntptrace.c (DoTrace): If the server's srcadr is 0.0.0.0
 2720: 	then we haven't synced yet.  Note and punt.
 2721: 	Reported by: Bdale Garbee <bdale@gag.com>,http://bugs.debian.org/56551
 2722: 
 2723: 2000-02-09  Harlan Stenn  <stenn@whimsy.udel.edu>
 2724: 
 2725: 	* ports/winnt/include/config.h: Typo (CLOCK_PALISADE comment)
 2726: 	From: Carl Byington <carl@five-ten-sg.com>
 2727: 
 2728: 	* configure.in: Disable kernel_fll_bug for Generic_105181-17 under
 2729: 	Solaris-2.6
 2730: 	From: Juergen Georgi <georgi@belwue.de>
 2731: 
 2732: 2000-02-07  Harlan Stenn  <stenn@whimsy.udel.edu>
 2733: 
 2734: 	* configure.in: 4.0.99d
 2735: 
 2736: 	* html/Oncore-SHMEM.htm: New document
 2737: 	* html/driver30.htm: Cleanup and improvements
 2738: 	From: Reg Clemens <reg@dwf.com>
 2739: 
 2740: 2000-01-30  Harlan Stenn  <stenn@whimsy.udel.edu>
 2741: 
 2742: 	* ntpd/refclock_oncore.c: Patches/improvements
 2743: 	From: Reg Clemens <reg@dwf.com>
 2744: 
 2745: 2000-01-29  Harlan Stenn  <stenn@whimsy.udel.edu>
 2746: 
 2747: 	* configure.in: 4.0.99c
 2748: 
 2749: 2000-01-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 2750: 
 2751: 	* configure.in: Autoconf update...
 2752: 
 2753: 	* ntpdate/ntpdate.c (ntpdatemain): Typo
 2754: 	From: Jack Bryans <jbryans@csulb.edu>
 2755: 
 2756: 	* Makefile.am (EXTRA_DIST): Add flock-build.  Probably UDel specific...
 2757: 
 2758: 2000-01-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 2759: 
 2760: 	* ntpd/check_y2k.c (main): Reformat for ansi2knr
 2761: 
 2762: 	* configure.in (AC_OUTPUT): Revert to obsolete form until automake
 2763: 	catches up.
 2764: 
 2765: 2000-01-22  Harlan Stenn  <stenn@whimsy.udel.edu>
 2766: 
 2767: 	* configure.in: Use AC_CHECK_TYPES((s_char)) instead of
 2768: 	AC_CHECK_TYPE.
 2769: 	(ac_cv_var_kernel_fll_bug): Generic_106541-08 is apparently OK, too.
 2770: 
 2771: 	* scripts/Makefile.am (EXTRA_DIST): Need to explicitly distribute
 2772: 	mkver.in and ntpver.in now, apparently.
 2773: 	* configure.in: Search for the various audio_info members so the
 2774: 	printing in audio_show is less of a circus.  This required an
 2775: 	autoconf upgrade.  Major sigh.
 2776: 
 2777: 	* libntp/audio.c (audio_show): Clean up (more) properly.
 2778: 
 2779: 2000-01-21  Sven Dietrich <sven_dietrich@trimble.com>
 2780: 
 2781: 	* Add pointer to html/hints/winnt.htm to INSTALL file
 2782: 	* Fix NT makefiles to accomodate at least one weird
 2783: 	  version of Visual C that can't handle the LFs without
 2784: 	  the DOS CR also.
 2785: 
 2786: 2000-01-20  Sven Dietrich <sven_dietrich@trimble.com>
 2787: 
 2788: 	* Update Copyright in Palisade driver to 2000
 2789: 	* Fix Palisade MIN & MAX POLL to optimal values
 2790: 
 2791: 2000-01-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 2792: 
 2793: 	* html/driver7.htm: Patches from Dave Mills
 2794: 	* html/driver36.htm: Patches from Dave Mills
 2795: 
 2796: 	* html/copyright.htm: Added Kamal Mostafa
 2797: 
 2798: 2000-01-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 2799: 
 2800: 	* configure.in: 4.0.99b
 2801: 
 2802: 2000-01-18  Harlan Stenn  <stenn@whimsy.udel.edu>
 2803: 
 2804: 	* ntpd/refclock_chu.c: NCHAN is used with generic ICOM.
 2805: 
 2806: 	* ntpd/refclock_wwv.c: Use new audio stuff
 2807: 	* ntpd/refclock_irig.c: Use new audio stuff
 2808: 	* ntpd/refclock_chu.c: Use new audio stuff
 2809: 	* ntpd/ntp_proto.c: Clean up
 2810: 	* ntpd/ntp_loopfilter.c (local_clock): Clean up error message
 2811: 	* include/icom.h: Number of arguments changed
 2812: 	* libntp/Makefile.am (libntp_a_SOURCES): Added audio.c
 2813: 	* libntp/audio.c: New file
 2814: 	* include/Makefile.am (noinst_HEADERS): audio.h added
 2815: 	* include/audio.h: New file
 2816: 	From: Dave Mills <mills@udel.edu>
 2817: 
 2818: 	* scripts/freq_adj: Added.  FreeBSD frequency adjustment script.
 2819: 
 2820: 	* configure.in: Do a better job on my oncore_ok check for SCO.
 2821: 
 2822: 2000-01-15  Harlan Stenn  <stenn@whimsy.udel.edu>
 2823: 
 2824: 	* configure.in: 4.0.99a
 2825: 
 2826: 	* scripts/ntpsweep: New version
 2827: 	* html/copyright.htm: Added Hans Lambermont
 2828: 	From: Hans Lambermont <Hans.Lambermont@nl.origin-it.com>
 2829: 
 2830: 2000-01-14  Harlan Stenn  <stenn@whimsy.udel.edu>
 2831: 
 2832: 	* ntpd/refclock_oncore.c (oncore_start): Only dance with the
 2833: 	pps_device if it's there.
 2834: 	From: reg@dwf.com
 2835: 
 2836: 	* configure.in: ONCORE is OK if ac_cv_hdr_def_tiocdcdtimestamp=yes
 2837: 
 2838: 	* build: Just overwrite the log file each time; sometimes NFS goes
 2839: 	a little goofy.
 2840: 
 2841: 	* ntpd/refclock_fg.c: Syntax/punctuation cleanup
 2842: 
 2843: 2000-01-13  Harlan Stenn  <stenn@whimsy.udel.edu>
 2844: 
 2845: 	* scripts/ntpsweep: New version
 2846: 	From: Hans Lambermont <Hans.Lambermont@nl.origin-it.com>
 2847: 
 2848: 	* ntpd/refclock_fg.c: New version
 2849: 	* html/driver37.htm: New version
 2850: 	From: Dmitry Smirnov <das@online.nsk.su>
 2851: 
 2852: 2000-01-12  Harlan Stenn  <stenn@whimsy.udel.edu>
 2853: 
 2854: 	* README.des: Cleanup
 2855: 
 2856: 2000-01-12  Harlan Stenn  <stenn@whimsy.udel.edu>
 2857: 
 2858: 	* configure.in: 4.0.99
 2859: 
 2860: 	* html/driver36.htm: Cleanup
 2861: 	* html/monopt.htm: Ditto
 2862: 	From: Dave Mills <mills@udel.edu>
 2863: 
 2864: 	* ntpd/ntp_intres.c (ntp_intres): Put "NTP_INTRES running" at a
 2865: 	higher debug level
 2866: 
 2867: 2000-01-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 2868: 
 2869: 	* ntpd/refclock_wwv.c: More improvements
 2870: 	From: Dave Mills <mills@udel.edu>
 2871: 
 2872: 2000-01-10  Harlan Stenn  <stenn@whimsy.udel.edu>
 2873: 
 2874: 	* ntpd/refclock_wwv.c: Bugfixes/improvements
 2875: 	From: Dave Mills <mills@udel.edu>
 2876: 
 2877: 	* configure.in: Get the quoting right on the sys_errlist check.
 2878: 	From documentation by: Akim Demaille <akim@epita.fr>
 2879: 
 2880: 2000-01-08  Harlan Stenn  <stenn@whimsy.udel.edu>
 2881: 
 2882: 	* configure.in: <netinet/ip.h> cannot be detected...
 2883: 	* ntpd/ntp_io.h: ...but every OS has it
 2884: 	* ntpd/refclock_oncore.c: Lint removal
 2885: 	* ntpq/ntpq_ops.c: Lint removal
 2886: 	* ntpq/refclock_chu.c: chu_major() is not an audio routine (?), lint
 2887: 	* libntp/icom.c: AIX doesn't have <sys/termios.h>
 2888: 	From: Marc.Brett@westgeo.com
 2889: 
 2890: 	* ntpd/refclock_chu.c: NetBSD needs sys/ioctl.h
 2891: 	(chu_debug): NetBSD-specific debug output.
 2892: 	From: Frederick Bruckman <fb@enteract.com>
 2893: 
 2894: 2000-01-06  Harlan Stenn  <stenn@whimsy.udel.edu>
 2895: 
 2896: 	* configure.in: 4.0.98m
 2897: 	I skipped `l' - it looks like a `1'.
 2898: 
 2899: 	* html/driver7.htm: Doc update
 2900: 	* html/driver36.htm: Ditto
 2901: 	* html/audio.htm: Ditto
 2902: 
 2903: 	* ntpd/refclock_wwv.c: Dvae snuck another fix/change in on me.
 2904: 
 2905: 	* configure.in: 4.0.98k
 2906: 
 2907: 	* ntpd/refclock_chu.c (chu_start): Call icom_init with the speed
 2908: 	* ntpd/refclock_wwv.c (wwv_start): Ditto, plus other improvements.
 2909: 	* libntp/icom.c (icom_init): Add speed parameter
 2910: 	* include/icom.h: Update declaration
 2911: 	From: Dave Mills <mills@udel.edu>
 2912: 
 2913: 	* include/Makefile.am (noinst_HEADERS): Added icom.h
 2914: 	From: Frederick Bruckman <fb@enteract.com>
 2915: 
 2916: 2000-01-05  Harlan Stenn  <stenn@whimsy.udel.edu>
 2917: 
 2918: 	* configure.in: 4.0.98j
 2919: 
 2920: 	* ntpd/refclock_wwv.c (timecode): Make definition == declaration
 2921: 	(wwv_newchan): Ditto
 2922: 	(wwv_corr4): Dave fixed the declaration.
 2923: 
 2924: 	* flock-build: Add rackety to the flock - it runs SunOS 4.1.3/cc
 2925: 
 2926: 	* ntpd/refclock_wwv.c: Undo that declaration cleanup for now...
 2927: 
 2928: 	* ntpd/ntp_io.c (open_socket): TOS support
 2929: 	From: Marc.Brett@westgeo.com
 2930: 
 2931: 2000-01-04  Harlan Stenn  <stenn@whimsy.udel.edu>
 2932: 
 2933: 	* ntpd/refclock_wwv.c: Declaration cleanup
 2934: 	* ntpd/refclock_fg.c (fg_receive): Not all sprintf's are created
 2935: 	equal...
 2936: 	From: Marc.Brett@westgeo.com
 2937: 
 2938: 	* ntpd/refclock_wwv.c: Dave Cleaned and Improved things.
 2939: 	* ntpd/ntp_loopfilter.c (local_clock): Dave fixed something.
 2940: 
 2941: 	* ntpd/refclock_wwv.c: Rename max to p_max or s_max as appropriate
 2942: 	to avoid native SunOS compiler collision.
 2943: 	(wwv_epoch): Make declaration == definition
 2944: 	(wwv_rsec): Ditto
 2945: 	(wwv_newchan): Ditto
 2946: 	(wwv_qsy): Ditto
 2947: 	(timecode): Ditto
 2948: 
 2949: 	* ntpd/refclock_oncore.c (oncore_init_shmem): Use a cast to widen
 2950: 	mmap's NIL offset.
 2951: 
 2952: 	* ntpd/refclock_chu.c (chu_rf): Make declaration == definition.
 2953: 	Rename min/max to es_min/es_max to avoid native SunOS compiler
 2954: 	collision.
 2955: 	(chu_uart): Make declaration == definition.
 2956: 
 2957: 	* libntp/icom.c (sndpkt): Make declaration and definition equivalent.
 2958: 	(doublefreq): Ditto.
 2959: 
 2960: 	* ntpd/refclock_oncore.c (MAP_FAILED): Some systems do not #define
 2961: 	this.
 2962: 
 2963: 	* ntpd/refclock_wwv.c:
 2964: 	* ntpd/refclock_chu.c:
 2965: 	* libntp/icom.c:
 2966: 	* libntp/Makefile.am:
 2967: 	* include/icom.h:
 2968: 	* html/driver7.htm:
 2969: 	* html/driver36.htm:
 2970: 	Support for ICOM.  The WWV/H driver, by the way, is getting truly
 2971: 	awesome.  The CHU autotune function works okay as it is.  I'd like
 2972: 	to find somebody else to test the audio drivers just to make sure
 2973: 	I haven't done something stupid.  There is a new define ICOM
 2974: 	intended for the driver autotune function; however, I crafted the
 2975: 	thing in much the same way as the refclock_atom.c thing - it tries
 2976: 	to open /dev/icom and, if that fails, goes quietly to sleep.
 2977: 	From: Dave Mills <mills@udel.edu>
 2978: 
 2979: 2000-01-03  Harlan Stenn  <stenn@whimsy.udel.edu>
 2980: 
 2981: 	* ntpd/refclock_oncore.c (oncore_read_config): Patches and cleanup
 2982: 	From: Poul-Henning Kamp <phk@critter.freebsd.dk>
 2983: 	more isascii() stuff from HMS.
 2984: 
 2985: 	* ntpd/refclock_fg.c (fg_receive): Cast.
 2986: 	From: Tom Smith <smith@cag.lkg.dec.com>
 2987: 
 2988: 	* ntpd/map_vme.c (map_vme): tx.access_result indicates failure on
 2989: 	< 0, not <= 0.  A fix that apparently did not get brought over
 2990: 	from the ntp3 base.
 2991: 	From: Michael Barone <michael.barone@lmco.com>
 2992: 
 2993: 	* configure.in: Move the ONCORE_SHMEM_STATUS check and definition
 2994: 	here.
 2995: 
 2996: 	* ntpd/refclock_oncore.c (oncore_init_shmem): Some systems do not
 2997: 	have MAP_HASSEMAPHORE.
 2998: 
 2999: 	* ntpd/refclock_oncore.c: Drive ONCORE_SHMEM_STATUS based on
 3000: 	HAVE_SYS_MMAN_H .  If this needs finer checks, do it in
 3001: 	configure.in .
 3002: 	(oncore_read_config): Add the isascii() checks; older versions of
 3003: 	Unix don't guarantee correct behavior of is*() without it.
 3004: 
 3005: 	* ntpd/refclock_oncore.c: Add proof-of-concept support for
 3006: 	  delivering receiver data stream to other processes through
 3007: 	  a memory-mapped file.
 3008: 	  From: Poul-Henning Kamp <phk@FreeBSD.org>
 3009: 
 3010: 2000-01-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 3011: 
 3012: 	* configure.in (ac_refclock_chu): Provide the CHU driver by
 3013: 	default, and by default prefer the AUDIO version.  We used to
 3014: 	limit this to SunOS or Solaris; now we drive by the availability
 3015: 	of the audioio header file.
 3016: 	Select the IRIG and WWV audio drivers the same way.
 3017: 
 3018: 	* flock-build: build ignores the -l flag; lose it.
 3019: 	(BUILD_ARGS): added.
 3020: 	* build: Remove unused -l stuff (LOG variable).
 3021: 
 3022: 	* ntpd/ntp_refclock.c: HAVE_PPSAPI header cleanup
 3023: 	From: Reg Clemens <reg@dwf.com>
 3024: 
 3025: 2000-01-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 3026: 
 3027: 	* configure.in (CLOCK_WWV): Require <sys/audioio.h> or <sun/audioio.h>
 3028: 
 3029: 1999-12-29  Harlan Stenn  <stenn@whimsy.udel.edu>
 3030: 
 3031: 	* configure.in: 4.0.98i
 3032: 
 3033: 	* ntpd/refclock_gpsvme.c: Fixes
 3034: 	From: Michael Barone <michael.barone@lmco.com>
 3035: 	Patch severely hacked by HMS to "make it conform".  I hope I
 3036: 	didn't break anything.
 3037: 
 3038: 	* scripts/ntpsweep: Nifty utility
 3039: 	From: Hans.Lambermont@nl.origin-it.com
 3040: 
 3041: 	* ntpd/refclock_fg.c:
 3042: 	* ntpd/refclock_conf.c:
 3043: 	* ntpd/ntp_control.c:
 3044: 	* ntpd/Makefile.am:
 3045: 	* libntp/clocktypes.c:
 3046: 	* include/ntp.h:
 3047: 	* html/refclock.htm:
 3048: 	* html/driver37.htm:
 3049: 	* configure.in:
 3050: 	* acconfig.h:
 3051: 	Forum Graphic GPS clock support
 3052: 	From: Dmitry Smirnov <das@online.nsk.su>
 3053: 
 3054: 	* configure.in: Default to compile the IRIG, CHU and WWV/H
 3055: 	drivers and compile the CHU driver for audio, not modem.
 3056: 	Requested by Dave Mills.
 3057: 
 3058: 	* html/audio.htm:
 3059: 	* html/driver36.htm:
 3060: 	* html/qth.htm:
 3061: 	Dave wrote these to go along with the changes I checked in yesterday.
 3062: 
 3063: 1999-12-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 3064: 
 3065: 	* ntpd/refclock_wwv.c:
 3066: 	* ntpd/refclock_conf.c:
 3067: 	* ntpd/refclock_chu.c:
 3068: 	* ntpd/ntp_refclock.c:
 3069: 	* ntpd/ntp_loopfilter.c:
 3070: 	* html/refclock.htm:
 3071: 	* html/pps.htm:
 3072: 	* html/index.htm:
 3073: 	* html/driver7.htm:
 3074: 	* html/driver6.htm:
 3075: 	* html/copyright.htm:
 3076: 
 3077: 	I indulged an old agenda to polish up some programs originally
 3078: 	written for a DSP evaluation board. The result is a really hot
 3079: 	audio driver for the NIST WWV/WWVH time/frequency station plus a
 3080: 	makeover for the CHU audio driver. Currently, they and their IRIG
 3081: 	audio driver buddy use the SunOS/Solaris audio interface, which is
 3082: 	clean and simple. I hook the line in jack to a shortwave radio and
 3083: 	these drivers (driver 7 for CHU and driver 36 for WWV) and the
 3084: 	drivers do the rest. The WWV/H driver is really hot - I am
 3085: 	currently watching the ionosphere move from the doppler that shows
 3086: 	up on the tick modulation tracked by the program. During midday
 3087: 	when the F2 layer settles down, the program closes in on a few
 3088: 	tens of microseconds of spare jitter and wander.  This watch on
 3089: 	whichever 15/20 MHz signal sounds the best. At night on 5/10 MHz
 3090: 	and even 2.5 HMz where the multipath, interference and noise are
 3091: 	much worse, the driver bangs around somewhat more.
 3092: 
 3093: 	The CHU driver makeover discovered a few broken bones after all
 3094: 	these years, but its majority decoder is back in business. For
 3095: 	various reasons to icky to reveal here, its 103-modem demodulator
 3096: 	is not quite as good as the chip, but it comes close and hey,
 3097: 	2025/2125 FSK is just not a good idea for HF radio. This driver is
 3098: 	not nearly as sophisitcated as the WWV/H driver, but here a few
 3099: 	hundred miles south of Ottawa, it does a passably good job.
 3100: 
 3101: 	I tell you this in the hopes of getting somebody interested in
 3102: 	porting the audio interface to other machines, in particular
 3103: 	Linux, FreeBSD and anything else with a sound card. When the
 3104: 	ionosphere stays cool, the WWV/H driver is as good as anything
 3105: 	else around here and with much less jitter than a serial port. The
 3106: 	only downside is all the audio drivers chew up a modest fraction
 3107: 	of cycles for the DSP routines - a few percent on the newer
 3108: 	silicon, up to half the cycles on an old Sparc IPC. Whattheheck,
 3109: 	these old machines aren't doing anything else around here except
 3110: 	serving time, and even when sucking cycles for DSP they still mind
 3111: 	the PPS microseconds.
 3112: 
 3113: 	The audio driver documentation had a makeover, too.
 3114: 	From: Dave Mills <mills@udel.edu>
 3115: 
 3116: 1999-12-20  Harlan Stenn  <stenn@whimsy.udel.edu>
 3117: 
 3118: 	* configure.in: 4.0.98h
 3119: 
 3120: 1999-12-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 3121: 
 3122: 	* libntp/syssignal.c: Small cleanup to Marc's patch.
 3123: 
 3124: 	* ntpd/ntp_refclock.c:
 3125: 	* ntpd/refclock_atom.c: Header cleanup
 3126: 	* html/driver30.htm: Cleanup and improvements.
 3127: 	From: Reg Clemens <reg@dwf.com>
 3128: 
 3129: 	* ntpd/ntp_refclock.c:
 3130: 	* ntpd/refclock_jupiter.c:
 3131: 	* ntpd/refclock_msfees.c:
 3132: 	* ntpd/refclock_mx4200.c:
 3133: 	Portability (Solaris) patches
 3134: 	* ntpd/refclock_mx4200.c:
 3135: 	Self-survey improvements, cleanup for, PPS re-activation
 3136: 	* libntp/syssignal.c:
 3137:  	Fix for "interrupted system call" (EINTR) failure of the PPS
 3138: 	ioctl(TIOCGPPSEV) call in Solaris.  Not sure why it was
 3139: 	interrupted, but this works around the failure.  Not sure if
 3140: 	the (now silent) interrupt affects the timing accuracy.
 3141: 		THERE IS A CHANCE THIS PART OF THE PATCH MAY ADVERSELY
 3142: 		AFFECT OTHER SYSTEMS!
 3143: 	* scripts/ntp-status: Added.
 3144: 	From: Marc.Brett@westgeo.com
 3145: 
 3146: 	* ntpdate/ntpdate.c: Deal with multiple addresses.
 3147: 	From: Jeffrey C Honig <jch@bsdi.com>
 3148: 
 3149: 	* ntpd/refclock_conf.c: Replaced macro SHM with CLOCK_SHM.
 3150: 	* ntpd/refclock_shm.c (shm_poll): Take clock time in UTC.
 3151: 		pp->day starts at 1, t->tm_yday starts at 0.
 3152: 	From: Jakob Stoklund Olesen <stoklund@taxidriver.dk>
 3153: 
 3154: 1999-12-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 3155: 
 3156: 	* NEWS: Updated ONCORE instructions
 3157: 	From: Kamal A Mostafa <kamal@whence.com>
 3158: 
 3159: 1999-12-13  Harlan Stenn  <stenn@whimsy.udel.edu>
 3160: 
 3161: 	* configure.in: 4.0.98g
 3162: 
 3163: 	* ntpd/refclock_oncore.c: Cleanup and fixes
 3164: 	From: Reg Clemens <reg@dwf.com> and Kamal A Mostafa <kamal@whence.com>
 3165: 
 3166: 1999-12-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 3167: 
 3168: 	* ntpd/refclock_wwv.c: Cleanup/checkin of the current state of affairs.
 3169: 	From: Dave Mills <mills@udel.edu>
 3170: 
 3171: 	* ntpd/refclock_oncore.c: #elif conversion.  I can only hope I did
 3172: 	it right.
 3173: 
 3174: 	* ntpd/refclock_oncore.c: Various patches
 3175: 	From: Reg Clemens <reg@dwf.com> and Kamal A Mostafa <kamal@whence.com>
 3176: 
 3177: 1999-12-09  Harlan Stenn  <stenn@whimsy.udel.edu>
 3178: 
 3179: 	* ntpd/ntp_proto.c (default_get_precision): Use the right arg type
 3180: 	to pass "sizeof freq" to sysctlbyname().
 3181: 	From: Ollivier Robert <roberto@eurocontrol.fr>
 3182: 
 3183: 	* ntpd/refclock_wwv.c: Cleanup and fixes.
 3184: 	From: Dave Mills <mills@udel.edu>
 3185: 
 3186: 1999-12-08  Harlan Stenn  <stenn@whimsy.udel.edu>
 3187: 
 3188: 	* ntpd/refclock_wwv.c: Cleanup and fixes
 3189: 	* ntpd/refclock_conf.c: WWV declaration cleanup.
 3190: 	From: Dave Mills <mills@udel.edu>
 3191: 
 3192: 1999-12-07  Harlan Stenn  <stenn@whimsy.udel.edu>
 3193: 
 3194: 	* libparse/clk_rawdcf.c (cvt_rawdcf): Buglet.
 3195: 	From: Frank Kardel <kardel <AT> acm.org>
 3196: 
 3197: 1999-12-06  Harlan Stenn  <stenn@whimsy.udel.edu>
 3198: 
 3199: 	* ntpd/Makefile.am (ntpd_SOURCES): Added refclock_wwv.c
 3200: 
 3201: 	* ntpd/refclock_wwvb.c:
 3202: 	* ntpd/refclock_wwv.c:
 3203: 	* ntpd/refclock_conf.c:
 3204: 	* ntpd/refclock_chu.c:
 3205: 	* libntp/clocktypes.c:
 3206: 	* include/ntp.h: Dave cleaned some things up
 3207: 	Dave cleaned some things up (WWVB -> SPECTRACOM, CHU -> CHU_AUDIO,
 3208: 	WWV_AUDIO)
 3209: 
 3210: 	* acconfig.h: REFCLOCK_WWVB -> REFCLOCK_SPECTRACOM, added REFCLOCK_WWV
 3211: 	* configure.in: Deal with it.
 3212: 
 3213: 1999-12-05  Harlan Stenn  <stenn@whimsy.udel.edu>
 3214: 
 3215: 	* ntpd/ntp_refclock.c (refclock_open): More PPS cleanup
 3216: 	From: Dave Mills <mills@udel.edu>
 3217: 
 3218: 	* ntpq/ntpq.c:
 3219: 	* ntpq/ntpq_ops.c:
 3220: 	Make `ntpq -pn' independent of DNS, ad advertised.
 3221: 	From: Kamal A Mostafa <kamal@whence.com>
 3222: 
 3223: 	* ntpd/refclock_mx4200.c (mx4200_start): make missing 3rd
 3224: 	parameter a 0.
 3225: 
 3226: 1999-12-04  Harlan Stenn  <stenn@whimsy.udel.edu>
 3227: 
 3228: 	* ntpd/ntp_refclock.c (refclock_open): "flags" processing cleanup
 3229: 	(refclock_open): PPS device initialization cleanup
 3230: 	* include/ntp_refclock.h (LDISC_CHU):
 3231: 	(LDISC_PPS): Clean up comments
 3232: 	From: Dave Mills <mills@udel.edu>
 3233: 
 3234: 1999-12-03  Sven Dietrich <sven_dietrich@trimble.com>
 3235: 
 3236: 	* libntp/mexit.c: Moved WINNT port specific file to ports/winnt/libntp
 3237: 	* ports/winnt/libntp/libntp.dsp: Fix WinNT makefile for new source loc.
 3238: 
 3239: 1999-12-03  Harlan Stenn  <stenn@whimsy.udel.edu>
 3240: 
 3241: 	* libntp/Makefile.am (libntp_a_SOURCES): Lose mexit.c - Sven will
 3242: 	move it to the winnt port area.
 3243: 
 3244: 1999-12-03  Sven Dietrich <sven_dietrich@trimble.com>
 3245: 
 3246: 	* libntp/systime.c: Removed adjtime hack for WINNT
 3247: 	* ports/winnt/ntpd/nt_clockstuff.c: Winnt double precision adjtime
 3248: 	* ports/winnt/inlcude/clockstuff.h: Remove no longer needed externs
 3249: 
 3250: 1999-12-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 3251: 
 3252: 	* libparse/Makefile.in: Manually hacked to remove the
 3253: 	libparse_kernel.a.[co] cruft
 3254: 
 3255: 	* libparse/Makefile.am (k*.o): Generate these form the Makefile,
 3256: 	not from separate .c files
 3257: 
 3258: 	* html/tickadj.htm:
 3259: 	* html/notes.htm:
 3260: 	* html/hints/solaris.html:
 3261: 	Point to the new dosynctodr report.
 3262: 
 3263: 	* html/hints/solaris.xtra.S99ntpd:
 3264: 	Update.  Should be rewritten to take advantage of the new -g
 3265: 	switch and perhaps a loop to wait until ntpd hits a reasonable
 3266: 	"state".
 3267: 
 3268: 	* html/hints/solaris-dosynctodr.html: New information
 3269: 	From: "John W. Sopko Jr." <sopko@cs.unc.edu>
 3270: 
 3271: 1999-12-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 3272: 
 3273: 	* libntp/authkeys.c (auth_moremem): Clear memory allocated for sk.
 3274: 	From: Hugo Mildenberger <hugo.mildenberger@topmail.de>
 3275: 
 3276: 1999-12-01  Sven Dietrich <sven_dietrich@trimble.com>
 3277: 
 3278: 	* libntp/recvbuff.c: Unused functions cleanup
 3279: 	* ntpd/ntpd.c: ProcessorAffinity, IO cleanup
 3280: 	* ports/winnt/instsrv/instsrv.c: Service name changed to NTP
 3281: 
 3282: 	NT port shouldn;t hop between CPUs. Set affinity to first processor.
 3283: 	Service name was NetworkTimeProtocol. Too long. Now NTP.
 3284: 
 3285: 1999-12-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 3286: 
 3287: 	* scripts/plot_summary.pl: Improved option parsing.  Fixed one
 3288: 	minor Perl compatibility error.
 3289: 	* scripts/summary.pl: Official revision for NTPv4: Parse new
 3290: 	statistic file formats correctly, provide error checking for bad
 3291: 	input files, and guard against negative arguments to sqrt()
 3292: 	because of numeric effects.  Use one pattern to select valid
 3293: 	statistic files.  Add selectable output directory
 3294: 	(``--output-directory'') and improved option parsing.  Directory
 3295: 	with statistic files (now settable also with
 3296: 	``--input-directory'') defaults to ``/var/log/ntp''.
 3297: 	From: Ulrich Windl  <Ulrich.Windl@rz.uni-regensburg.de>
 3298: 
 3299: 	* html/driver8.htm:
 3300: 	* libparse/clk_computime.c:
 3301: 	* libparse/clk_dcf7000.c:
 3302: 	* libparse/clk_hopf6021.c:
 3303: 	* libparse/clk_meinberg.c:
 3304: 	* libparse/clk_rawdcf.c:
 3305: 	* libparse/clk_rcc8000.c:
 3306: 	* libparse/clk_schmid.c:
 3307: 	* libparse/clk_trimtaip.c:
 3308: 	* libparse/clk_trimtsip.c:
 3309: 	* libparse/data_mbg.c:
 3310: 	* libparse/kclk_computime.c:
 3311: 	* libparse/kclk_dcf7000.c:
 3312: 	* libparse/kclk_hopf6021.c:
 3313: 	* libparse/kclk_meinberg.c:
 3314: 	* libparse/kclk_rawdcf.c:
 3315: 	* libparse/kclk_rcc8000.c:
 3316: 	* libparse/kclk_schmid.c:
 3317: 	* libparse/kclk_trimtaip.c:
 3318: 	* libparse/kclk_trimtsip.c:
 3319: 	* libparse/kparse.c:
 3320: 	* libparse/kparse_conf.c:
 3321: 	* libparse/parse.c:
 3322: 	* libparse/parse_conf.c:
 3323: 	* libparse/parsesolaris.c:
 3324: 	* libparse/parsestreams.c:
 3325: 	* ntpd/refclock_parse.c:
 3326: 	Mods and updates
 3327: 	From: Frank Kardel <kardel <AT> acm.org>
 3328: 
 3329: 	* acconfig.h: PCF refclock
 3330: 	* configure.in:
 3331: 	* html/driver35.htm:
 3332: 	* html/refclock.htm:
 3333: 	* include/ntp.h:
 3334: 	* libntp/clocktypes.c:
 3335: 	* ntpd/Makefile.am:
 3336: 	* ntpd/ntp_control.c:
 3337: 	* ntpd/refclock_conf.c:
 3338: 	* ntpd/refclock_pcf.c:
 3339: 	From: Andreas Voegele <andreas.voegele@gmx.de>
 3340: 
 3341: 	* acconfig.h: DECL_STIME_1
 3342: 
 3343: 	* configure.in (iCFLAGS): Use -std1 for alpha*-dec-osf* if we are
 3344: 	using "cc".
 3345: 	Reported by: Tom Smith <smith@cag.lkg.dec.com>
 3346: 
 3347: 1999-11-30  Harlan Stenn  <stenn@whimsy.udel.edu>
 3348: 
 3349: 	* include/l_stdlib.h: DECL_SYSTIME_1 --- a long *
 3350: 	* configure.in: Use it for DEC OSF[45]
 3351: 	Reported by: Tom Smith <smith@cag.lkg.dec.com>
 3352: 
 3353: 	* ntpd/refclock_parse.c: Add missing declarations
 3354: 	* ntptrace/ntptrace.c: Ditto
 3355: 	* ntpd/ntp_proto.c: Ditto
 3356: 	* ntpd/refclock_palisade.c: Ditto
 3357: 	From: Jonathan Stone <jonathan@dsg.stanford.edu>
 3358: 
 3359: 1999-11-18  Sven Dietrich  <sven_dietrich@trimble.com>
 3360: 	* Win NT port updates
 3361: 	* ntpd.dsp: makefile only builds supported refclocks
 3362: 	* config.h: cleanup, undefine unsupported clock_atom
 3363: 	* win32_io, clock_NMEA: foundation for future refclock support
 3364: 	* recvbuff, transmitbuff, IOcompletionport: streamline packet handler
 3365: 	* html/hints/winnt.htm: Added up-to-date html docs for WINNT
 3366: 
 3367: 1999-11-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 3368: 
 3369: 	* html/copyright.htm: Credit Jack for his work.
 3370: 
 3371: 	* html/pic/*: Save a *ton* of space on the pictures.
 3372: 	From: Jack Sasportas <jack@innovativeinternet.com>
 3373: 
 3374: 1999-11-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 3375: 
 3376: 	* configure.in :  changequote for osf[45] test.
 3377: 	Reported by: Tom Smith <smith@cag.lkg.dec.com>
 3378: 
 3379: 	* ntp_update: Ignore stuff in any A.* directory.
 3380: 
 3381: 1999-11-15  Harlan Stenn  <stenn@whimsy.udel.edu>
 3382: 
 3383: 	* configure.in: Clean up header checks for sys/syssgi.h and
 3384: 	sys/select.h .  Originally, we did not check for sys/select.h
 3385: 	under some versions of SCO (see xntp3-5).  Somewhere in ntp4 we
 3386: 	dropped the SCO check and added the check for sys/syssgi.h,
 3387: 	exclusive of checking for sys/select.h.  Marc Brett can't think of
 3388: 	a reason why we should not be checking for sys/select.h, so let's
 3389: 	look for it now.
 3390: 
 3391: 1999-11-13  Harlan Stenn  <stenn@whimsy.udel.edu>
 3392: 
 3393: 	* ntpdate/ntpdate.c: Add the ability for ntpdate to query a
 3394: 	multicast address.  We use the response to the multicast address
 3395: 	to learn new servers which we then add to the peer list and query.
 3396: 	In changing this I made the list of peers a linked list.
 3397: 
 3398: 	To be complete I should detect a broadcast address and make it
 3399: 	behave the same way.  But that requires a scan of the interface
 3400: 	list which is more complicated that I want to deal with...
 3401: 
 3402: 	Fix a bug, allowing ntpdate to compile if SLEWALWAYS and STEP_SLEW
 3403: 	are both defined.
 3404: 
 3405: 	From: Jeffrey C Honig <jch@bsdi.com>
 3406: 
 3407: 	* ntpd/ntp_refclock.c: sys/sio.h and SCO5_CLOCK cleanup
 3408: 	From: Kamal A Mostafa <kamal@whence.com>
 3409: 
 3410: 	* ntpd/ntp_loopfilter.c: Let -g do a "correct any" for the first
 3411: 	time adjustment.
 3412: 	From: Dave Mills <mills@udel.edu>
 3413: 
 3414: 	* configure.in: sys/sio.h needs to be checked independently.
 3415: 	Reported by: Kamal A Mostafa <kamal@whence.com>
 3416: 
 3417: 1999-11-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 3418: 
 3419: 	* configure.in: 4.0.98f
 3420: 
 3421: 	* configure.in: DECL_PLOCK_0 and DECL_STIME_0 are for dec-osf5*, too
 3422: 	* ntpd/ntpd.c: 	DEC OSF cleanup (editorial comments by HMS)
 3423: 	From: Tom Smith <smith@cag.lkg.dec.com>
 3424: 
 3425: 	* ntpd/ntp_refclock.c: MAXUNIT bugfix
 3426: 	From: Marc.Brett@westgeo.com
 3427: 
 3428: 	* ntpd/ntp_refclock.c:
 3429: 	* ntpd/ntpd.c:
 3430: 	* ntpd/refclock_arc.c:
 3431: 	* ntpd/refclock_as2201.c:
 3432: 	* ntpd/refclock_atom.c:
 3433: 	* ntpdc/ntpdc.c:
 3434: 	* ntpq/ntpq.c:
 3435: 	Code cleanup.
 3436: 	From: Marc.Brett@westgeo.com
 3437: 
 3438: 	* include/ntp_stdlib.h:
 3439: 	* libntp/systime.c:
 3440: 	* ntpd/ntp_proto.c:
 3441: 	Replaced the 'sco5_oldclock' variable with 'systime_10ms_ticks'.
 3442: 	Cleared libntp/systime.c and include/ntp_stdlib.h of references
 3443: 	to SCO5_CLOCK and RELIANTUNIX_CLOCK (moved to ntpd/ntp_proto.c).
 3444: 	From: Kamal A Mostafa <kamal@whence.com>
 3445: 
 3446: 	* configure.in: alpha-dec-osf4* -> alpha*-dec-osf4*|alpha*-dec-osf5*
 3447: 	From: Tom Smith <smith@cag.lkg.dec.com>
 3448: 
 3449: 	* configure.in: Look for <sys/sio.h>.  If TIOCDCDTIMESTAMP is
 3450: 	there, we have TTYCLK.
 3451: 	* acconfig.h: Lose old AIOCTIMESTAMP stuff
 3452: 	Reported by: Kamal A Mostafa <kamal@whence.com>
 3453: 
 3454: 1999-11-10  Harlan Stenn  <stenn@whimsy.udel.edu>
 3455: 
 3456: 	* ntpd/ntpd.c (set_process_priority): Clean up nice() and setpriority()
 3457: 
 3458: 1999-11-09  Harlan Stenn  <stenn@whimsy.udel.edu>
 3459: 
 3460: 	* Makefile.am (EXTRA_DIST): Added README.cvs
 3461: 	Reported by: Kamal A Mostafa <kamal@whence.com>
 3462: 
 3463: 1999-11-08  Harlan Stenn  <stenn@whimsy.udel.edu>
 3464: 
 3465: 	* configure.in: 4.0.98e
 3466: 
 3467: 1999-11-07  Harlan Stenn  <stenn@whimsy.udel.edu>
 3468: 
 3469: 	* configure.in: Lose AIOCTIMESTAMP tests
 3470: 
 3471: 	* ntpd/ntpd.c: lose select() EINTR debug warning
 3472: 	* ntpd/ntp_refclock.c: AIOCTIMESTAMP -> TIOCDCDTIMESTAMP.  Watch
 3473: 	CLK_SETSTR.
 3474: 	* ntpd/refclock_atom.c: fdpps is only there for PPS or PPSAPI.
 3475: 	AIOCTIMESTAMP is gone now.
 3476: 	From: Kamal A Mostafa <kamal@whence.com>
 3477: 
 3478: 	* configure.in (HAVE_MLOCKALL): Deal with dec-osf5 realities
 3479: 	* ntpd/refclock_ulink.c (ulink_poll): Fix cast.
 3480: 	* libntp/machines.c (ntp_set_tod): Use a long* for the argument to
 3481: 	stime().
 3482: 	Reported by: Tom Smith <smith@cag.lkg.dec.com>
 3483: 
 3484: 	* ntpd/ntpd.c (set_process_priority): Use whatever we have until
 3485: 	something works.
 3486: 
 3487: 	* ntpd/ntp_loopfilter.c: Keep clock_frequency changes in a temp
 3488: 	variable so we can record it to loopstats (near as HMS can tell).
 3489: 	From: Dave Mills <mills@udel.edu>
 3490: 
 3491: 1999-11-06  Harlan Stenn  <stenn@whimsy.udel.edu>
 3492: 
 3493: 	* acconfig.h: RELIANTUNIX_CLOCK
 3494: 	* configure.in (ac_cv_var_tickadj): RELIANTUNIX_CLOCK
 3495: 	* libntp/systime.c (adj_systime): Reliant patches
 3496: 	From: Andrej Borsenkow <Andrej.Borsenkow@mow.siemens.ru>
 3497: 
 3498: 1999-11-05  Harlan Stenn  <stenn@whimsy.udel.edu>
 3499: 
 3500: 	* ntpd/refclock_parse.c (parse_start): ASYNC_PPS_CD_NEG cleanup
 3501: 	* configure.in (ac_cv_make_ntptime): OK on Linux
 3502: 	From: <Ulrich.Windl@rz.uni-regensburg.de>
 3503: 
 3504: 	* configure.in: NetBSD has PPSAPI now
 3505: 	F_SETOWN is needed for NetBSD
 3506: 	From: Jonathan Stone <jonathan@dsg.stanford.edu>
 3507: 
 3508: 1999-11-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 3509: 
 3510: 	* configure.in: 4.0.98d
 3511: 
 3512: 	* ntpd/refclock_parse.c: Cleanup/fixes
 3513: 	From: John Hay <jhay@mikom.csir.co.za>
 3514: 
 3515: 	* ntpd/refclock_parse.c: Lose #include "ntp_select.h"
 3516: 	* ntpd/ntpd.c: Lose #include "ntp_select.h"
 3517: 	* ntpd/ntp_io.c: Lose #include "ntp_select.h"
 3518: 	* ntpd/ntp_intres.c: Lose #include "ntp_select.h"
 3519: 	* libntp/iosignal.c: Lose #include "ntp_select.h"
 3520: 	* include/ntpd.h: #include "ntp_select.h" for declaration of activefds
 3521: 	Reported by: Christian Krackowizer <kra1@technodat.co.at>
 3522: 
 3523: 1999-11-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 3524: 
 3525: 	* configure.in: 4.0.98c
 3526: 
 3527: 	* libntp/syssignal.c: Don't warn about SA_RESTART
 3528: 	* libntp/recvbuff.c: Fix free buffer count
 3529: 	From: Jeffrey C Honig <jch@bsdi.com>
 3530: 
 3531: 	* html/pps.htm:
 3532: 	* html/howto.htm:
 3533: 	* html/confopt.htm:
 3534: 	* html/clockopt.htm:
 3535: 	* html/uthopt.htm:
 3536: 	Updates.
 3537: 	From: Dave Mills <mills@udel.edu>
 3538: 
 3539: 	* ntpd/refclock_wwvb.c: burst fixes
 3540: 	* ntpd/refclock_ulink.c: burst fixes
 3541: 	* ntpd/refclock_tpro.c: burst and NSTAGE fixes
 3542: 	* ntpd/refclock_pst.c: burst fixes
 3543: 	* ntpd/refclock_irig.c: SAMPLE -> SAMPLES
 3544: 	* ntpd/refclock_heath.c: burst fixes
 3545: 	* ntpd/refclock_dumbclock.c: burst fixes
 3546: 	* ntpd/refclock_chronolog.c: burst fixes
 3547: 	* ntpd/refclock_bancomm.c: burst fixes
 3548: 	* ntpd/refclock_atom.c: burst fixes
 3549: 	* ntpd/refclock_as2201.c: burst fixes
 3550: 	* ntpd/ntp_refclock.c: PPSAPI, code, and comment cleanup/fixes
 3551: 	* ntpd/ntp_proto.c: Broadcast/restrict cleanup
 3552: 	* ntpd/ntp_loopfilter.c: Cleanup and fixes
 3553: 	* libntp/gpstolfp.c: Lose the UL qualifiers - old compilers hate them
 3554: 	From: Dave Mills <mills@udel.edu>
 3555: 
 3556: 1999-10-31  Harlan Stenn  <stenn@whimsy.udel.edu>
 3557: 
 3558: 	* configure.in: TIOCSPPS cleanup
 3559: 
 3560: 1999-10-20  Harlan Stenn  <stenn@whimsy.udel.edu>
 3561: 
 3562: 	* configure.in: 4.0.98b
 3563: 
 3564: 	* ntpd/refclock_atom.c: AIOCTIMESTAMP patch
 3565: 	* ntpd/ntpd.c: SCO clock patch
 3566: 	* ntpd/ntp_request.c: noselect patch
 3567: 	* ntpd/ntp_refclock.c: AIOCTIMESTAMP patch
 3568: 	* ntpd/ntp_proto.c: noselect patch
 3569: 	* ntpd/ntp_intres.c: noselect patch
 3570: 	* ntpd/ntp_config.c: noselect patch
 3571: 	* include/ntp_request.h: noselect patch
 3572: 	* include/ntp.h: noselect patch
 3573: 	From: Kamal A Mostafa <kamal@whence.com>
 3574: 
 3575: 	* configure.in:
 3576: 	* acconfig.h: TTYCLK_AIOCTIMESTAMP
 3577: 	Stuff for Kamal
 3578: 
 3579: 	* ntpd/refclock_atom.c (atom_pps): make "result" initialization
 3580: 	uglier, but more bulletproof.
 3581: 
 3582: 	* configure.in (sys/timepps.h): Fixed.
 3583: 	From: John Hay <jhay@mikom.csir.co.za>
 3584: 
 3585: 1999-10-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 3586: 
 3587: 	* ntpd/refclock_oncore.c: Rename instance.state to instance.o_state
 3588: 
 3589: 	* refclock_oncore.c:
 3590: 	* refclock_mx4200.c:
 3591: 	* refclock_chu.c:
 3592: 	* refclock_atom.c:
 3593: 	* ntp_refclock.c:
 3594: 	* ntp_peer.c:
 3595: 	* ntp_loopfilter.c:
 3596: 	* include/ntp_refclock.h:
 3597: 	Various cleanup and fixes
 3598: 	From: Dave Mills <mills@udel.edu>
 3599: 
 3600: 1999-10-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 3601: 
 3602: 	* ntpd/ntp_config.c (CONFIG_FILE): NT changes
 3603: 	From: Sven Dietrich <Sven_Dietrich@trimble.com>
 3604: 
 3605: 1999-10-16  Harlan Stenn  <stenn@whimsy.udel.edu>
 3606: 
 3607: 	* configure.in: sys/timepps.h verification changes
 3608: 
 3609: 	* ntpd/refclock_atom.c (atom_poll): PPS cleanup
 3610: 	From: Dave Mills <mills@udel.edu>
 3611: 	(atom_pps): Portability patch
 3612: 	From: John Hay <jhay@mikom.csir.co.za>
 3613: 
 3614: 
 3615: 	* libntp/msyslog.c:
 3616: 	* libntp/gpstolfp.c:
 3617: 	Lint cleanup
 3618: 	From: Jonathan Stone <jonathan@dsg.stanford.edu>
 3619: 
 3620: 	* parseutil/dcfd.c:  abs() -> l_abs(), time.h (AIX 4.3.2 patches)
 3621: 	From: Dana Kaempen <decay@flash.net>
 3622: 
 3623: 	* ntpd/refclock_oncore.c:
 3624: 	* ntpd/refclock_atom.c:
 3625: 	* ntpd/ntp_refclock.c:
 3626: 	PPS cleanup
 3627: 	From: John.Hay@mikom.csir.co.za
 3628: 
 3629: 	* util/ntptime.c:
 3630: 	* ntpdate/ntptimeset.c:
 3631: 	* ntpdate/ntpdate.c:
 3632: 	* ntpd/refclock_trak.c:
 3633: 	* ntpd/refclock_oncore.c:
 3634: 	* ntpd/refclock_mx4200.c:
 3635: 	* ntpd/refclock_msfees.c:
 3636: 	* ntpd/refclock_atom.c:
 3637: 	* ntpd/ntp_control.c:
 3638: 	* ntpd/ntp_config.c:
 3639: 	* configure.in:
 3640: 	* configure:
 3641: 	PPS, Solaris 7, cleanup patches
 3642: 	From: Marc.Brett@westgeo.com
 3643: 
 3644: 	* ports/winnt/ntptrace/ntptrace.dsp:
 3645: 	* ports/winnt/ntpq/ntpq.dsp:
 3646: 	* ports/winnt/ntpdc/ntpdc.dsp:
 3647: 	* ports/winnt/ntpdate/ntpdate.dsp:
 3648: 	* ports/winnt/ntpd/refclock_trimbledc.c:
 3649: 	* ports/winnt/ntpd/ntpd.dsp:
 3650: 	* ports/winnt/ntpd/ntp_iocompletionport.c:
 3651: 	* ports/winnt/ntpd/nt_clockstuff.c:
 3652: 	* ports/winnt/libntp/util_clockstuff.c:
 3653: 	* ports/winnt/libntp/libntp.dsp:
 3654: 	* ports/winnt/libntp/SetSystemTime.c:
 3655: 	* ports/winnt/instsrv/instsrv.c:
 3656: 	* ports/winnt/include/sys/ioctl.h:
 3657: 	* ports/winnt/include/termios.h:
 3658: 	* ports/winnt/include/config.h:
 3659: 	* ports/winnt/include/clockstuff.h:
 3660: 	* ports/winnt/ntp.dsw:
 3661: 	* ntpd/refclock_shm.c:
 3662: 	* ntpd/refclock_palisade.c:
 3663: 	* ntpd/ntpd.c:
 3664: 	* ntpd/ntp_timer.c:
 3665: 	* ntpd/ntp_refclock.c:
 3666: 	* libntp/systime.c:
 3667: 	* libntp/machines.c:
 3668: 	NT patches
 3669: 	From: Sven Dietrich <Sven_Dietrich@trimble.com>
 3670: 
 3671: 1999-10-15  Harlan Stenn  <stenn@whimsy.udel.edu>
 3672: 
 3673: 	* ntpd/refclock_wwvb.c:
 3674: 	* ntpd/refclock_usno.c:
 3675: 	* ntpd/refclock_ulink.c:
 3676: 	* ntpd/refclock_tpro.c:
 3677: 	* ntpd/refclock_pst.c:
 3678: 	* ntpd/refclock_parse.c:
 3679: 	* ntpd/refclock_palisade.c:
 3680: 	* ntpd/refclock_oncore.c:
 3681: 	* ntpd/refclock_mx4200.c:
 3682: 	* ntpd/refclock_msfees.c:
 3683: 	* ntpd/refclock_jupiter.c:
 3684: 	* ntpd/refclock_irig.c:
 3685: 	* ntpd/refclock_heath.c:
 3686: 	* ntpd/refclock_chu.c:
 3687: 	* ntpd/refclock_atom.c:
 3688: 	* ntpd/refclock_as2201.c:
 3689: 	* ntpd/refclock_arc.c:
 3690: 	* ntpd/refclock_arbiter.c:
 3691: 	* ntpd/refclock_acts.c:
 3692: 	* ntpd/ntp_refclock.c:
 3693: 	* include/ntp_refclock.h:
 3694: 	Bunches of fixes.
 3695: 	From: Dave Mills <mills@udel.edu>
 3696: 
 3697: 1999-10-10  Harlan Stenn  <stenn@whimsy.udel.edu>
 3698: 
 3699: 	* html/driver16.htm: New version
 3700: 	* ntpd/refclock_bancomm.c: New version
 3701: 	From: "Cliff, Gary" <gary.cliff@cdott.com>
 3702: 	"Ramasivan, Ganesh" <ganesh.ramasivan@cdott.com>
 3703: 
 3704: 	* ntpd/refclock_ulink.c (ulink_receive): Cleanup
 3705: 	(ulink_poll): Cleanup
 3706: 	* ntpd/refclock_atom.c (atom_pps): SunOS timespec/timeval cleanup
 3707: 	From: Marc.Brett@westgeo.com
 3708: 
 3709: 	* INSTALL: Point NT folks at ports/winnt
 3710: 	Reported by: Stephen Gildea <gildea@intouchsys.com>
 3711: 
 3712: 	* include/ntp_stdlib.h: Noise abatement
 3713: 	* include/ntpd.h: Noise abatement
 3714: 	Reported by: "W. David Higgins" <wdh@grouper.ccur.com>
 3715: 
 3716: 	* configure.in: DECL_STDIO_0 with gcc under solaris.
 3717: 
 3718: 	* include/l_stdlib.h: DECL_TOUPPER_0
 3719: 	DECL_STRERROR_0
 3720: 
 3721: 	* configure.in: Fix a bunch of implicit declarations for SunOS
 3722: 
 3723: 	* html/release.htm: cleanup - we still provide MD5.
 3724: 	Reported by: Winslowe Lacesso <lacesso@cs.ubc.ca>
 3725: 
 3726: 1999-10-09  Harlan Stenn  <stenn@whimsy.udel.edu>
 3727: 
 3728: 	* ntpd/refclock_oncore.c:
 3729: 	* ntpd/refclock_atom.c:
 3730: 	* ntpd/ntp_refclock.c:
 3731: 	PPS API code updated to the current spec
 3732: 	From: Dave Mills
 3733: 
 3734: 	* configure.in (ac_cv_make_tickadj): Don't make tickadj starting
 3735: 	with solaris2.5
 3736: 	Requested by: Dave Mills
 3737: 
 3738: 1999-10-04  Harlan Stenn  <stenn@whimsy.udel.edu>
 3739: 
 3740: 	* configure.in: We might need -lsocket for the -lnsl check.
 3741: 
 3742: 1999-09-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 3743: 
 3744: 	* ntpd/refclock_ulink.c: Typos in C++ comment
 3745: 	Reported by: Thomas.Tornblom@Sun.SE
 3746: 
 3747: 	* configure.in: 4.0.98a
 3748: 
 3749: 	* ntpd/ntp_config.c (getconfig): Fix typo.
 3750: 	From: "David E. Myers" <dem@skyline.rtp.nc.us>
 3751: 	From: David Godfrey <dave@delta.demon.co.uk>
 3752: 	From: Geoffrey Sisson <geoff@nominet.org.uk>
 3753: 
 3754: 1999-09-17  Harlan Stenn  <stenn@whimsy.udel.edu>
 3755: 
 3756: 	* configure.in: 4.0.98
 3757: 
 3758: 	NetInfo support:
 3759: 
 3760: 	* config.guess
 3761: 	* config.sub
 3762: 	Add Mac OS (versions 10 and up).
 3763: 
 3764: 	* acconfig.h
 3765: 	* config.h.in
 3766: 	* configure.in
 3767: 	Check for NetInfo API; add HAVE_NETINFO macro and friends.
 3768: 
 3769: 	* include/ntp.h
 3770: 	* ntpd/ntp_config.c
 3771: 	* ntpdate/ntpdate.c
 3772: 	Add support for reading configuration from NetInfo.
 3773: 
 3774: 	* ntpd/ntp_config.c
 3775: 	Get rid of unnecessary eol variable in tokenizer.
 3776: 
 3777: 	* html/notes.htm
 3778: 	* html/ntpd.htm
 3779: 	* html/ntpdate.htm
 3780: 	Document NetInfo functionality.
 3781: 
 3782: 	* util/tickadj.c
 3783: 	Use HAVE_KVM_OPEN conditional around kvm.h include.
 3784: 
 3785: 	From: Wilfredo Sanchez <wsanchez@apple.com>
 3786: 
 3787: 1999-09-15  Harlan Stenn  <stenn@whimsy.udel.edu>
 3788: 
 3789: 	* acconfig.h:
 3790: 	* config.h.in:
 3791: 	* configure.in:
 3792: 	* html/driver34.htm:
 3793: 	* html/refclock.htm:
 3794: 	* include/ntp.h:
 3795: 	* libntp/clocktypes.c:
 3796: 	* ntpd/Makefile.am:
 3797: 	* ntpd/ntp_control.c:
 3798: 	* ntpd/refclock_conf.c:
 3799: 	* ntpd/refclock_ulink.c:
 3800: 	Ultralink driver
 3801: 	From: Dave Strout <dstrout@linuxfoundary.com>
 3802: 
 3803: 1999-09-14  Harlan Stenn  <stenn@whimsy.udel.edu>
 3804: 
 3805: 	* configure.in: ReliantUNIX patches
 3806: 	From: Andrej Borsenkow <Andrej.Borsenkow@mow.siemens.ru>
 3807: 
 3808: 	* ntpd/refclock_atom.c: PPS cleanup
 3809: 	* ntpd/ntp_refclock.c (refclock_ioctl): PPS cleanup
 3810: 	From: Dave Mills <mills@udel.edu>
 3811: 
 3812: 	* ntptrace/ntptrace.c (ReceiveBuf): addserver() can return NIL.
 3813: 	Reported by: "Alan J. Wylie" <alanw@cyrano.com>
 3814: 
 3815: 	* libntp/ieee754io.c:
 3816: 	* ntpd/ntp_proto.c:
 3817: 	* ntpd/ntp_refclock.c:
 3818: 	Lint cleanup.
 3819: 	From: Marc.Brett@westgeo.com
 3820: 
 3821: 1999-09-12  Harlan Stenn  <stenn@whimsy.udel.edu>
 3822: 
 3823: 	* ntpd/ntp_refclock.c (refclock_ioctl): Declaration cleanup.
 3824: 
 3825: 	* ntpd/ntp_proto.c (init_proto): msyslog kern_enable at LOG_DEBUG.
 3826: 
 3827: 	* ntpd/refclock_atom.c: Add missing declaration.
 3828: 
 3829: 1999-09-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 3830: 
 3831: 	* configure.in (ac_cv_make_ntptime): Just look for struct
 3832: 	ntptimeval, not timespec or nsec (Solaris 2.7 should get ntptime
 3833: 	and it uses msec).
 3834: 	(ac_cv_var_oncore_ok): Reorder so it's a "normal" clock
 3835: 
 3836: 	* configure.in: Solaris Kernel FLL bug fixed in 106541-07
 3837: 
 3838: 1999-09-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 3839: 
 3840: 	* configure.in: 4.0.97f
 3841: 
 3842: 	* ntptrace/ntptrace.c:
 3843: 	* ntpdate/ntptimeset.c:
 3844: 	* ntpdate/ntptime_config.c:
 3845: 	* ntpdate/ntpdate.c:
 3846: 	* util/ntptime.c:
 3847: 	* parseutil/dcfd.c:
 3848: 	* libparse/parsestreams.c:
 3849: 	* libparse/parse_conf.c:
 3850: 	* libparse/parse.c:
 3851: 	* libparse/clk_varitext.c:
 3852: 	* libparse/clk_trimtsip.c:
 3853: 	* libparse/clk_trimtaip.c:
 3854: 	* libparse/clk_schmid.c:
 3855: 	* libparse/clk_rcc8000.c:
 3856: 	* libparse/clk_rawdcf.c:
 3857: 	* libparse/clk_meinberg.c:
 3858: 	* libparse/clk_hopf6021.c:
 3859: 	* libparse/clk_dcf7000.c:
 3860: 	* libparse/clk_computime.c:
 3861: 	* libntp/msyslog.c:
 3862: 	* libntp/iosignal.c:
 3863: 	* libntp/syssignal.c:
 3864: 	* adjtimed/adjtimed.c:
 3865: 	* ntpd/refclock_shm.c:
 3866: 	* ntpd/refclock_parse.c:
 3867: 	* ntpd/refclock_palisade.c:
 3868: 	* ntpd/refclock_mx4200.c:
 3869: 	* ntpd/refclock_jupiter.c:
 3870: 	* ntpd/refclock_datum.c:
 3871: 	* ntpd/ntpd.c:
 3872: 	* ntpd/ntp_util.c:
 3873: 	* ntpd/ntp_timer.c:
 3874: 	* ntpd/ntp_request.c:
 3875: 	* ntpd/ntp_refclock.c:
 3876: 	* ntpd/ntp_monitor.c:
 3877: 	* ntpd/ntp_loopfilter.c:
 3878: 	* ntpd/ntp_io.c:
 3879: 	* ntpd/ntp_intres.c:
 3880: 	* ntpd/ntp_filegen.c:
 3881: 	* include/l_stdlib.h:
 3882: 	<errno.h> and errno declaration cleanup.
 3883: 
 3884: 	* ntpd/map_vme.c: cleanup some spacing.
 3885: 
 3886: 1999-09-01  Harlan Stenn  <stenn@whimsy.udel.edu>
 3887: 
 3888: 	* configure.in: 4.0.97e
 3889: 
 3890: 	* configure.in (ac_cv_struct_sigaction_has_sa_sigaction):
 3891: 	* acconfig.h: Ditto
 3892: 	* parseutil/dcfd.c (main): Use it.
 3893:  	From: HOSAKA Eiichi <HOSAKA.Eiichi@dd.anritsu.co.jp>
 3894: 
 3895: 1999-08-29  Harlan Stenn  <stenn@whimsy.udel.edu>
 3896: 
 3897: 	* configure.in: 4.0.97d
 3898: 
 3899: 	* include/ntp_stdlib.h: Clean up previous NeXT patch.
 3900: 	From: Jack Bryans <jbryans@csulb.edu>
 3901: 
 3902: 	* ntpd/refclock_parse.c: Permit RTS to power a DCF77.
 3903: 	From: Carsten Paeth <calle@calle.in-berlin.de>
 3904: 
 3905: 	* ntpd/refclock_oncore.c (oncore_start): This makes the Oncore run
 3906: 	on systems without hardpps().
 3907: 	From: Poul-Henning Kamp <phk@freebsd.org>
 3908: 
 3909: 1999-08-28  Harlan Stenn  <stenn@whimsy.udel.edu>
 3910: 
 3911: 	* configure.in: 4.0.97c
 3912: 
 3913: 	* configure.in (ac_cv_make_ntptime):  Typo.
 3914: 	From: Ulrich Windl <ulrich.windl@rz.uni-regensburg.de>
 3915: 
 3916: 1999-08-26  Harlan Stenn  <stenn@whimsy.udel.edu>
 3917: 
 3918: 	* configure.in: 4.0.97b
 3919: 
 3920: 	* libntp/iosignal.c:
 3921: 	* ntpd/ntp_peer.c:
 3922: 	* ntpd/refclock_nmea.c:
 3923: 	* ntpdate/ntptime_config.c:
 3924: 	* ntpdate/ntptimeset.c:
 3925: 	AIX, Irix, and SunOS lint cleanup
 3926: 	From: Marc.Brett@westgeo.com
 3927: 
 3928: 1999-08-24  Harlan Stenn  <stenn@whimsy.udel.edu>
 3929: 
 3930: 	* configure.in 4.0.97a
 3931: 
 3932: 	* configure.in (AC_OUTPUT): added scripts/Makefile
 3933: 	* Makefile.am (SUBDIRS): Added scripts
 3934: 	* scripts/Makefile.am: Added
 3935: 
 3936: 1999-08-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 3937: 
 3938: 	* ntpd/refclock_nmea.c: Patches for:
 3939:         Trimble OEM Ace-II receiver. Low cost PCB with single
 3940:         voltage input, external active antenna and two serial
 3941:         ports with either NMEA and ITAPs output. Programmable
 3942:         to be tuned for 'time' accuracy in fixed station config.
 3943: 	From: Nick Hibma <nick.hibma@jrc.it>
 3944: 
 3945: 1999-08-21  Harlan Stenn  <stenn@whimsy.udel.edu>
 3946: 
 3947: 	* ntpd/ntp_config.c: Added listen_to_virtual_ips support (-L flag)
 3948: 	* ntpd/ntp_io.c: Ditto
 3949: 
 3950: 1999-08-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 3951: 
 3952: 	* ntpd/ntp_intres.c (request): Lint cleanup
 3953: 	* ntpd/ntp_control.c (ctl_putclock): Ditto
 3954: 	* libntp/recvbuff.c (getrecvbufs): Ditto
 3955: 	(get_free_recv_buffer): Ditto
 3956: 	* libntp/systime.c (adj_systime): Ditto
 3957: 
 3958: 1999-08-18  Harlan Stenn  <stenn@whimsy.udel.edu>
 3959: 
 3960: 	* configure.in: 4.0.97
 3961: 
 3962: 	* libntp/systime.c:
 3963: 	* ntpd/ntp_loopfilter.c:
 3964: 	* ntpd/ntpd.c:
 3965: 	* ports/winnt/libntp/nt_clockstuff.c:
 3966: 	From: Sven Dietrich <Sven_Dietrich@trimble.com>
 3967: 
 3968: 	* README.cvs: Updated.
 3969: 
 3970: 	* configure.in:
 3971: 	* include/ntp_machine.h:
 3972: 	* libntp/mexit.c:
 3973: 	* ntpd/ntp_config.c:
 3974: 	* ntpd/ntp_peer.c:
 3975: 	* ntpd/ntp_restrict.c:
 3976: 	* ntpd/refclock_arc.c:
 3977: 	* ntpdate/ntpdate.c:
 3978: 	Irix, SunOS, AIX, lint patches
 3979: 	From: Marc.Brett@westgeo.com
 3980: 
 3981: 	* util/ansi2knr.c: New release (fix for bug reported by Marc Brett)
 3982: 	From: "L. Peter Deutsch" <ghost@aladdin.com>
 3983: 
 3984: 	* include/ntp_stdlib.h: NeXT portability patch
 3985: 	From: Jack Bryans <jbryans@csulb.edu>
 3986: 
 3987: 	* configure.in:
 3988: 	* dot.emacs: (cleanup)
 3989: 	* ntpdate/Makefile.am:
 3990: 	* ntpdate/ntpdate.h:
 3991: 	* ntpdate/ntptime_config.c:
 3992: 	* ntpdate/ntptimeset.c:
 3993: 	ntptimeset patches.
 3994: 	From: Jeffrey Hutzelman <jhutz@cmu.edu>
 3995: 
 3996: 	* ntpd/refclock_parse.c (local_input): ts.l_ui -> ts.fp.l_ui
 3997: 
 3998: 1999-08-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 3999: 
 4000: 	* configure.in: 4.0.96p1
 4001: 
 4002: 	* ntpd/ntpd.c (sys/resource.h): Include this file only #if
 4003:  	HAVE_SYS_RESOURCE_H.
 4004: 	(set_process_priority): Use TIOCNOTTY only if it is #define'd.
 4005: 	* ntpd/refclock_parse.c (STREAM): STREAM does not imply HAVE_TERMIOS.
 4006: 	(termios.h, termio.h, fcntl.h): Do not include those files here;
 4007: 	they are already included by ntp_refclock.h or ntp_io.h.
 4008: 	* ntpd/refclock_leitch.c (sgtty.h, termios.h, termio.h): Do not
 4009: 	include those files here; they are already included by ntp_refclock.h.
 4010: 	* ntpdate/ntpdate.c (sys/resource.h) : Include that file only #if
 4011: 	HAVE_RESOURCE_H.
 4012: 	From: Philippe De Muyter <phdm@macqel.be>
 4013: 
 4014: 	* ntptrace/ntptrace.c (input_handler): Make it a "normal" function
 4015: 	definition.
 4016: 	Reported by: GIANNI_CATANIA@hp-italy-om6.om.hp.com
 4017: 
 4018: 	* configure.in:  pc-cygwin32 -> pc-cygwin* because of a change in
 4019: 	B20.
 4020: 	From: Stephen Gildea <gildea@intouchsys.com>
 4021: 
 4022: 1999-08-09  Harlan Stenn  <stenn@whimsy.udel.edu>
 4023: 
 4024: 	* configure.in: 4.0.96
 4025: 
 4026: 	* parseutil/dcfd.c (main): Replace SA_ONSTACK and SV_ONSTACK with
 4027: 	HAVE_SIGACTION and HAVE_SIGVEC, respectively.  HP-UX provides both
 4028: 	of the former but only one of the latter...
 4029: 
 4030: 1999-08-08  Harlan Stenn  <stenn@whimsy.udel.edu>
 4031: 
 4032: 	* configure.in: Better tests for -lnsl and -lsocket
 4033: 	From: Albert Chin-A-Young <china@thewrittenword.com>
 4034: 
 4035: 	Works for me - handle openlog() and -lgen the same way.
 4036: 
 4037: 	* Makefile.am (EXTRA_DIST): Add in the y2k notes
 4038: 
 4039: 	* parseutil/dcfd.c: Renamed drift_comp to accum_drift
 4040: 
 4041: 	* configure.in: Added MAKE_CHECK_Y2K support; check_y2k needs libparse.
 4042: 	* ntpd/Makefile.am (check_PROGRAMS): Use MAKE_CHECK_Y2K
 4043: 	* ntpd/Makefile.am (check-local): Added.
 4044: 	* parseutil/Makefile.am (check-local): Added.
 4045: 
 4046: 	* include/ntp.h: Y2KFixes
 4047: 	* libparse/parse.c: Ditto
 4048: 	* ntpd/Makefile.am (check_PROGRAMS): Ditto
 4049: 	* ntpd/refclock_acts.c: Ditto
 4050: 	* ntpd/refclock_arc.c (arc_receive): Ditto
 4051: 	* ntpd/refclock_heath.c: Ditto
 4052: 	* ntpd/refclock_hpgps.c: Ditto
 4053: 	* parseutil/Makefile.am (check-local): Ditto
 4054: 	* parseutil/dcfd.c (check_y2k): Ditto
 4055: 	* NOTES.y2kfixes: Ditto
 4056: 	* readme.y2kfixes: Ditto
 4057: 	* results.y2kfixes: Ditto
 4058: 	* ntpd/check_y2k.c: Ditto
 4059: 	From: y2k@y2k.labs.att.com
 4060: 
 4061: 1999-08-07  Harlan Stenn  <stenn@whimsy.udel.edu>
 4062: 
 4063: 	* configure.in: Look for sys/ppstime.h.
 4064: 
 4065: 1999-07-31  Harlan Stenn  <stenn@whimsy.udel.edu>
 4066: 
 4067: 	* ntpd/ntp_io.c (create_sockets): Typo.
 4068: 	From: Doug Wells <dmw@contek.com>
 4069: 
 4070: 1999-07-29  Harlan Stenn  <stenn@whimsy.udel.edu>
 4071: 
 4072: 	* configure.in (ac_cv_struct_ntptimeval): Explicitly look for
 4073: 	struct ntptimeval.
 4074: 	(ac_cv_var_kernel_pll): Require struct ntptimeval.
 4075: 	Linux.  Grrr.
 4076: 	Reported by: Ronald Kuetemeier <ronaldk@smginc.com>
 4077: 
 4078: 1999-07-27  Harlan Stenn  <stenn@whimsy.udel.edu>
 4079: 
 4080: 	* configure.in: 4.0.95
 4081: 
 4082: 	* ports/winnt: New release
 4083: 	From: Sven Dietrich <Sven_Dietrich@trimble.com>
 4084: 
 4085: 1999-07-26  Harlan Stenn  <stenn@whimsy.udel.edu>
 4086: 
 4087: 	* libntp/machines.c (ntp_set_tod): Bugfix
 4088: 	From: Andrej Borsenkow <Andrej.Borsenkow@mow.siemens.ru>
 4089: 
 4090: 1999-07-25  Harlan Stenn  <stenn@whimsy.udel.edu>
 4091: 
 4092: 	* configure.in: 4.0.94b
 4093: 
 4094: 	* acconfig.h:
 4095: 	* configure.in:
 4096: 	* libparse/Makefile.am:
 4097: 	* libparse/parse_conf.c:
 4098: 	* libparse/clk_varitext.c:
 4099: 	* libparse/kclk_varitext.c:
 4100: 	* ntpd/refclock_parse.c: VARITEXT parse clock
 4101: 	* ntpdate/ntpdate.c: bugfix
 4102: 	From: Tony McConnell <tonym@datel-technology.co.uk>
 4103: 
 4104: 1999-07-24  Harlan Stenn  <stenn@whimsy.udel.edu>
 4105: 
 4106: 	* include/ntp_syscall.h (ntp_gettime): Make it static
 4107: 	* configure.in: Added AC_C_INLINE
 4108: 	Reported by: "Charles C. Fu" <ccwf@klab.caltech.edu>
 4109: 
 4110: 1999-07-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 4111: 
 4112: 	* include/ntpd.h:
 4113: 	* libntp/machines.c:
 4114: 	* libntp/systime.c:
 4115: 	* ntpd/ntp_config.c:
 4116: 	* ntpd/ntp_filegen.c:
 4117: 	* ntpd/ntp_io.c:
 4118: 	* ntpd/ntp_proto.c:
 4119: 	* ntpd/ntp_timer.c:
 4120: 	* ntpdate/ntpdate.c: Windows NT port cleanup
 4121: 	From: Sven Dietrich <Sven_Dietrich@trimble.com>
 4122: 
 4123: 1999-07-22  Harlan Stenn  <stenn@whimsy.udel.edu>
 4124: 
 4125: 	* libntp/authkeys.c:
 4126: 	* libntp/ieee754io.c:
 4127: 	* libntp/iosignal.c:
 4128: 	* libntp/machines.c:
 4129: 	* libntp/mexit.c:
 4130: 	* libntp/recvbuff.c:
 4131: 	* ntpd/ntp_filegen.c:
 4132: 	* ntpd/ntp_loopfilter.c:
 4133: 	* ntpd/ntp_request.c:
 4134: 	* ntpd/ntp_timer.c:
 4135: 	* ntpd/ntpd.c: Compile/lint cleanup
 4136: 	From: Allen Smith <easmith@beatrice.rutgers.edu>
 4137: 
 4138: 1999-07-21  Harlan Stenn  <stenn@whimsy.udel.edu>
 4139: 
 4140: 	* configure.in: 4.0.94a
 4141: 
 4142: 	* configure.in (ac_cv_make_ntptime): Add tv_nsec check.
 4143: 
 4144: 	* include/Makefile.am (noinst_HEADERS): Forgot ntp_syscall.h
 4145: 	From: John.Hay@mikom.csir.co.za
 4146: 
 4147: 	* configure.in: 4.0.94
 4148: 
 4149: 	* Makefile.am (SUBDIRS): librsaref
 4150: 	(dist-hook): Lose CVS subdirs in the distribution tarball
 4151: 
 4152: 	* include/Makefile.am (noinst_HEADERS): Added iosignal.h, recvbuff.h
 4153: 
 4154: 	* Makefile.am (dist-hook): Don't call dos2unix anymore
 4155: 
 4156: 1999-07-20  Harlan Stenn  <stenn@whimsy.udel.edu>
 4157: 
 4158: 	* acconfig.h:
 4159: 	* util/ntptime.c: FreeBSD nano patches
 4160: 	From: Per Hedeland <per@erix.ericsson.se> and
 4161: 	Allen Smith <easmith@beatrice.rutgers.edu>
 4162: 
 4163: 	* include/ntp.h:
 4164: 	include/ntp_fp.h:
 4165: 	include/ntp_io.h:
 4166: 	include/ntp_machine.h:
 4167: 	include/ntp_refclock.h:
 4168: 	include/ntp_stdlib.h:
 4169: 	include/ntpd.h:
 4170: 	libntp/Makefile.am:
 4171: 	libntp/emalloc.c:
 4172: 	libntp/machines.c:
 4173: 	libntp/mexit.c:
 4174: 	libntp/msyslog.c:
 4175: 	libntp/statestr.c:
 4176: 	libntp/syssignal.c:
 4177: 	libntp/systime.c:
 4178: 	libparse/parse.c:
 4179: 	libparse/parse_conf.c:
 4180: 	ntpd/ntp_control.c:
 4181: 	ntpd/ntp_intres.c:
 4182: 	ntpd/ntp_io.c:
 4183: 	ntpd/ntp_proto.c:
 4184: 	ntpd/ntp_refclock.c:
 4185: 	ntpd/ntp_request.c:
 4186: 	ntpd/ntp_timer.c:
 4187: 	ntpd/ntp_util.c:
 4188: 	ntpd/ntpd.c:
 4189: 	ntpd/refclock_nmea.c:
 4190: 	ntpd/refclock_palisade.c:
 4191: 	ntpd/refclock_palisade.h:
 4192: 	ntpd/refclock_shm.c:
 4193: 	ntpdate/ntpdate.c:
 4194: 	ntptrace/ntptrace.c: Cleanup
 4195: 	* libntp/recvbuff.c:
 4196: 	libntp/iosignal.c:
 4197: 	include/iosignal.h:
 4198: 	include/recvbuff.h: Added
 4199: 	From: Sven_Dietrich@Trimble.COM
 4200: 
 4201: 	* README: Add README.cvs
 4202: 
 4203: 	* configure.in (ac_cv_var_struct_ntptime_val_timespec): Typo.
 4204: 	From: John Hay <jhay@mikom.csir.co.za>
 4205: 
 4206: 1999-07-19  Harlan Stenn  <stenn@whimsy.udel.edu>
 4207: 
 4208: 	* Makefile.am (EXTRA_DIST): Lose ntpmak; "build" does a better job.
 4209: 
 4210: 	* ntpq/Makefile.am (version.o): Use mkver
 4211: 	* ntptrace/Makefile.am (version.o): Ditto
 4212: 	* ntpdate/Makefile.am (version.o): Ditto
 4213: 	* ntpd/Makefile.am (version.o): Ditto
 4214: 	* ntpdc/Makefile.am (version.o): Ditto
 4215: 
 4216: 	* configure.in (AC_OUTPUT): scripts/mkver
 4217: 
 4218: 	* scripts/mkver.in: Created.  Note RSAREF in the version string
 4219: 
 4220: 1999-07-18  Harlan Stenn  <stenn@whimsy.udel.edu>
 4221: 
 4222: 	* README.des: Updated.
 4223: 
 4224: 	* ntpq/Makefile.am (LDADD): Add LIBRSAREF
 4225: 
 4226: 	* ntpdc/Makefile.am (LDADD): Add LIBRSAREF
 4227: 
 4228: 	* ntpdate/Makefile.am (LDADD): Add LIBRSAREF
 4229: 
 4230: 	* ntpd/Makefile.am (LDADD): Add LIBRSAREF
 4231: 
 4232: 	* configure.in (AC_OUTPUT): Added librsaref/Makefile
 4233: 	Added tests for making/using librsaref.a
 4234: 	Lose old DES stuff; AC_DEFINE(DES) if we find the rsaref stuff.
 4235: 
 4236: 1999-07-11  Harlan Stenn  <stenn@whimsy.udel.edu>
 4237: 
 4238: 	* ntpd/refclock_trak.c (trak_receive): disambiguate expression.
 4239: 	At least now it is unambiguous.  It may even still be correct.
 4240: 	Reported by: Tom Smith <smith@cag.lkg.dec.com>
 4241: 
 4242: 	* ntp_update (UPDATE_OPTIONS): Typo.
 4243: 
 4244: 1999-07-07  Harlan Stenn  <stenn@whimsy.udel.edu>
 4245: 
 4246: 	* ntp_update: Check out copyright.htm before COPYRIGHT
 4247: 
 4248: 	* ntpd/ntp_config.c: Support for PPS assert/clear/hardpps
 4249: 	* ntpd/ntp_refclock.c (refclock_ioctl): Ditto
 4250: 	(refclock_gtlin): Ditto
 4251: 	* html/clockopt.htm: Document.
 4252: 	From: John Hay <jhay@mikom.csir.co.za>
 4253: 
 4254:         * html/monopt.htm: We have four types of files now
 4255:         * ntpd/refclock_oncore.c: If debug is on, tell when
 4256:         we are waiting for a valid almanac
 4257: 	From: Poul-Henning Kamp <phk@critter.freebsd.dk>
 4258: 
 4259: 	* include/ntp_machine.h (HAVE_TERMIOS): STREAMS does not imply
 4260: 	HAVE_TERMIOS !!!
 4261: 	* include/parse.h (timercmp): Macro defined if needed.
 4262: 	* ntpd/ntp_config.c (SIGCHLD): Macro defined as SIGCLD if needed.
 4263: 	(sys/wait.h): File included only if HAVE_SYS_WAIT_H.
 4264: 	* configure.in (sys/wait.h): File added to AC_CHECK_HEADERS list.
 4265: 	From: Philippe De Muyter  <phdm@macqel.be>
 4266: 
 4267: 1999-06-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 4268: 
 4269: 	* ntpd/refclock_irig.c (irig_debug): NetBSD patches
 4270: 	From: Frederick Bruckman <fb@enteract.com>
 4271: 
 4272: 	* util/ntptime.c (main): ntx.freq bugfix (-f option)
 4273: 	From: Frederick Bruckman <fb@enteract.com>
 4274: 
 4275: 1999-06-22  Harlan Stenn  <stenn@whimsy.udel.edu>
 4276: 
 4277: 	* configure.in: Fix typo with DECL_H_ERRNO test
 4278: 
 4279: 	* ntpd/ntp_loopfilter.c: Lose syscall decl, it's handled in
 4280: 	l_stdlib.h now.
 4281: 	* ntpd/ntp_request.c: Ditto
 4282: 	* util/ntptime.c: Ditto
 4283: 
 4284: Mon May 31 18:49:49 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4285: 
 4286: 	* ntpd/ntp_proto.c (proto_config): Don't set sys_bclient on
 4287: 	PROTO_MULTICAST_ADD, only caller can decide; remove wrong set on
 4288: 	PROTO_MULTICAST_DEL.
 4289: 
 4290: Mon May 31 18:49:49 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4291: 
 4292: 	* ntpd/refclock_parse.c (stream_receive): Cast size_t to int to
 4293: 	match format.
 4294: 	(local_receive): Likewise.
 4295: 	(trimbletaip_event): Likewise.
 4296: 	(stream_receive): Cast struct timeval members to long to match
 4297: 	format.
 4298: 	(local_receive): Likewise.
 4299: 
 4300: 	* ntpd/ntp_util.c (stats_config): Cast size_t to int to match
 4301: 	format.
 4302: 
 4303: 	* libparse/clk_rawdcf.c (cvt_rawdcf): Cast ptr difference to int
 4304: 	to match format.
 4305: 	* ntpd/refclock_parse.c (gps16x_poll): Likewise.
 4306: 
 4307: 	* ntpd/ntp_filegen.c (filegen_open): Use long format, cast arg to
 4308: 	match.
 4309: 
 4310: 	* ntpd/refclock_parse.c (list_err): Use long format to match arg.
 4311: 	(parse_statistics): Likewise.
 4312: 	(gps16x_message): Likewise.
 4313: 	(cvt_ts): Use long format, cast args to match.
 4314: 	(parse_start): Add missing arg.
 4315: 	(gps16x_message): Swap args to match format.
 4316: 
 4317: 	* ntpd/ntpd.c (ntpdmain): Cast uid to long, adapt format.
 4318: 
 4319: 	* ntpd/ntp_intres.c (readconf): Use long format to match arg.
 4320: 	* ntpd/ntp_io.c (getrecvbufs): Likewise.
 4321: 	* ntpd/ntp_proto.c (default_get_precision): Likewise.
 4322: 
 4323: 	* ntpd/ntp_loopfilter.c (local_clock): Cast clock_panic to int to
 4324:  	match format.
 4325: 
 4326: 	* ntpd/ntp_io.c (io_multicast_add): Print s_addr member, not
 4327: 	struct in_addr, to match format.
 4328: 
 4329: 	* include/ntp_stdlib.h: Declare msyslog() as printf-like for gcc
 4330: 	format checking.
 4331: 
 4332: Fri May 28 16:39:35 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4333: 
 4334: 	* ntpdc/ntpdc_ops.c (iostats): Align timereset line.
 4335: 
 4336: 	* ntpq/ntpq_ops.c (doopeers): Properly align header.
 4337: 
 4338: 	* ntpdc/ntpdc_ops.c (debug): Removed declaration, already in
 4339: 	ntp_stdlib.h.
 4340: 	* ntpq/ntpq_ops.c: Likewise.
 4341: 
 4342: 	* ntpdate/ntpdate.c (debug): Declare volatile to match
 4343: 	ntp_stdlib.h.
 4344: 	* ntpdc/ntpdc.c, ntpq/ntpq.c, ntptrace/ntptrace.c, util/tickadj.c,
 4345: 	util/ntptime.c: Likewise.
 4346: 
 4347: 	* include/parse.h (debug): Don't declare to avoid clash with
 4348: 	ntp_stdlib.h.
 4349: 
 4350: 	* include/Makefile.am (noinst_HEADERS): Add new ntp_syscall.h.
 4351: 
 4352: 	* configure.in: Also check for -lrt for POSIX.1c functions.
 4353: 
 4354: Wed May 26 21:03:30 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4355: 
 4356: 	* configure.in: Removed -Wwrite-strings from CFLAGS.
 4357: 
 4358: 	* ntpdc/ntpdc.c (help): Remove superfluous cast.
 4359: 	* ntpq/ntpq.c (help): Likewise.
 4360: 
 4361: Tue May 25 18:00:49 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4362: 
 4363: 	* ntpq/ntpq_ops.c (struct varlist): name cannot be const char *
 4364: 	since it may be malloc'ed.
 4365: 
 4366: 	* ntpdc/ntpdc.c (sendrequest): Declare pass as const char *, don't
 4367: 	lose const in cast.
 4368: 	* ntpq/ntpq.c (sendrequest): Likewise.
 4369: 
 4370: 	* ntpd/ntp_control.c (ctl_getitem): Remove superfluous cast.
 4371: 	* include/ntpd.h (struct ctl_var): text cannot be const char *
 4372: 	since it's malloc'ed.
 4373: 
 4374: 1999-06-22  Harlan Stenn  <stenn@whimsy.udel.edu>
 4375: 
 4376: 	* include/l_stdlib.h: Don't include <netinet/in.h>, add	forward
 4377: 	declaration of struct in_addr instead.
 4378: 	From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
 4379: 
 4380: 	Patch:
 4381: 
 4382: 	* include/l_stdlib.h: Fixed syscall() declaration.
 4383: 	* configure.in: Updated test to match.
 4384: 
 4385: 	* configure.in: Check if we need to declare errno and h_errno.
 4386: 	Check for <resolv.h> which may provide a h_errno declaration and
 4387: 	<arpa/nameserv.h> which the latter needs.
 4388: 	* acconfig.h: Provide the necessary templates.
 4389: 
 4390: 	* include/ntp_syscall.h: New file, hides various implementations
 4391: 	of ntp_adjtime() and ntp_gettime() syscalls.
 4392: 	* ntpd/ntp_loopfilter.c: Use it.
 4393: 	* ntpd/ntp_request.c: Likewise.
 4394: 	* ntpd/refclock_local.c: Likewise.
 4395: 	* util/ntptime.c: Likewise.
 4396: 
 4397: 	* include/l_stdlib.h: Include <netinet/in.h>, declare inet_ntoa if
 4398: 	necessary.
 4399: 	Moved syscall() declaration here.
 4400: 
 4401: 	* kernel/sys/parsestreams.h: Include <sys/termios.h> for it's
 4402: 	definition of struct ppsclockev.
 4403: 	Include <sys/ppsclock.h> unconditionally for definition of
 4404: 	CIOGETEV via TIOCGPPSEV.
 4405: 	* kernel/sys/ppsclock.h: Protect struct ppsclockev from
 4406: 	redefinition.
 4407: 
 4408: 	* include/ntp_refclock.h: Protect it from multiple inclusion.
 4409: 	* include/ntp_fp.h: Likewise.
 4410: 	* include/ntp.h: Likewise.
 4411: 
 4412: 	* include/ntpd.h: Include ntp_refclock.h for MAXDIAL declaration.
 4413: 	* libntp/authkeys.c: Include ntpd.h for current_time declaration.
 4414: 
 4415: 	* include/ntpd.h (getauthkeys, auth_agekeys, rereadkeys): Moved
 4416: 	prototypes to ntp_stdlib.h
 4417: 
 4418: 	* include/ntp_stdlib.h: Declare variables exported by libntp.
 4419: 	* include/ntpd.h: Likewise for ntpd.
 4420: 
 4421: 	* libntp/authkeys.c (key_hash, authnokey, authfreekeys,
 4422: 	cache_flags): Made static.
 4423: 	* libntp/systime.c (tvu_maxslew, tsf_maxslew, sys_clock_offset,
 4424: 	sys_residual): Likewise.
 4425: 	* ntpd/ntp_intres.c (confentries): Likewise.
 4426: 	* ntpd/ntp_loopfilter.c (clock_offset, clock_panic): Likewise.
 4427: 	(pll_nano): Likewise. Removed duplicate definition.
 4428: 	* ntpd/ntp_peer.c (peer_free, current_association_ID,
 4429: 	assocpeer_calls, init_peer_starttime): Likewise.
 4430: 	* ntpd/ntp_proto.c (sys_offset, sys_authdly): Likewise.
 4431: 	* ntpd/ntp_request.c (numrequests, numresppkts, errorcounter):
 4432: 	Likewise.
 4433: 	* ntpd/ntp_restrict.c (res_calls, res_found, res_not_found,
 4434: 	res_timereset, res_limited_refcnt): Likewise.
 4435: 	* ntpd/ntpd.c (was_alarmed, worker_thread): Likewise.
 4436: 
 4437: 	* ntpq/ntpq_ops.c: Moved declaration of external variable from
 4438: 	ntpq.c to file scope.
 4439: 
 4440: 	* adjtimed/adjtimed.c: Moved declarations of external variables to
 4441: 	ntpd.h and ntp_stdlib.h.
 4442: 	* clockstuff/propdelay.c: Likewise.
 4443: 	* libntp/a_md5encrypt.c, libntp/authencrypt.c, libntp/authkeys.c,
 4444: 	libntp/mfp_mul.c, libntp/msyslog.c, libntp/systime.c: Likewise.
 4445: 	* ntpd/ntp_config.c, ntpd/ntp_control.c, ntpd/ntp_filegen.c,
 4446: 	ntpd/ntp_intres.c, ntpd/ntp_io.c, ntpd/ntp_loopfilter.c,
 4447: 	ntpd/ntp_monitor.c, ntpd/ntp_peer.c, ntpd/ntp_proto.c,
 4448: 	ntpd/ntp_refclock.c, ntpd/ntp_request.c, ntpd/ntp_restrict.c,
 4449: 	ntpd/ntp_timer.c, ntpd/ntp_util.c, ntpd/ntpd.c,
 4450: 	ntpd/refclock_acts.c, ntpd/refclock_arbiter.c, ntpd/refclock_arc.c,
 4451: 	ntpd/refclock_as2201.c, ntpd/refclock_atom.c,
 4452: 	ntpd/refclock_bancomm.c, ntpd/refclock_chronolog.c,
 4453: 	ntpd/refclock_chu.c, ntpd/refclock_datum.c,
 4454: 	ntpd/refclock_dumbclock.c, ntpd/refclock_gpsvme.c,
 4455: 	ntpd/refclock_heath.c, ntpd/refclock_hpgps.c, ntpd/refclock_irig.c,
 4456: 	ntpd/refclock_jupiter.c, ntpd/refclock_leitch.c,
 4457: 	ntpd/refclock_local.c, ntpd/refclock_msfees.c,
 4458: 	ntpd/refclock_mx4200.c, ntpd/refclock_nmea.c,
 4459: 	ntpd/refclock_oncore.c, ntpd/refclock_palisade.h,
 4460: 	ntpd/refclock_parse.c, ntpd/refclock_pst.c, ntpd/refclock_shm.c,
 4461: 	ntpd/refclock_tpro.c, ntpd/refclock_trak.c, ntpd/refclock_true.c,
 4462: 	ntpd/refclock_usno.c, ntpd/refclock_wwvb.c: Likewise.
 4463: 	* ntpdate/ntpdate.c: Likewise.
 4464: 	* ntpdc/ntpdc.c, ntpdc/ntpdc_ops.c: Likewise.
 4465: 	* ntpq/ntpq.c: Likewise.
 4466: 	* ntptrace/ntptrace.c: Likewise.
 4467: 	* util/ntptime.c, til/tickadj.c: Likewise.
 4468: 	From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
 4469: 
 4470: 	* include/ntp_machine.h: Removed superfluous yy/mm/dd comments.
 4471: 	* include/ntpd.h: Likewise.
 4472: 	* libntp/authencrypt.c: Likewise.
 4473: 	* libntp/a_md5encrypt.c: Likewise.
 4474: 	* libntp/caljulian.c: Likewise.
 4475: 	* libntp/ymd2yd.c: Likewise.
 4476: 	* libntp/syssignal.c: Likewise.
 4477: 	* libntp/ymd2yd.c: Likewise.
 4478: 	* ntpd/ntp_control.c: Likewise.
 4479: 	* ntpd/ntp_io.c: Likewise.
 4480: 	* ntpd/ntp_timer.c: Likewise.
 4481: 	* ntpdate/ntpdate.c: Likewise.
 4482: 	* ntpq/ntpq_ops.c: Likewise.
 4483: 	* ntpd/ntp_peer.c (findpeer): Wrap debug output in DEBUG/debug.
 4484: 	From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
 4485: 
 4486: 	* dot.emacs: Removed wrong indentation of substatements.
 4487: 	Wrap in c-style.
 4488: 	From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
 4489: 
 4490: 	* ntpd/refclock_palisade.c: Patches from Marc Brett
 4491: 	* ntpd/refclock_palisade.h: Ditto.
 4492: 	* util/hist.c: Ditto.
 4493: 
 4494: Tue Jun  1 00:40:04 1999  Harlan Stenn  <stenn@pogo.udel.edu>
 4495: 
 4496: 	* build: mips-dec-ultrix4.4 hates "set -e"
 4497: 
 4498: 	* flock-build: Created
 4499: 
 4500: 	* build: added -l option
 4501: 
 4502: Mon May 31 20:28:40 1999  Harlan Stenn  <stenn@pogo.udel.edu>
 4503: 
 4504: 	* README: Removed auto{make,conf}.patch files
 4505: 
 4506: Tue May 25 01:20:53 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4507: 
 4508: 	* Makefile.am ($(srcdir)/COPYRIGHT): Added
 4509: 	(EXTRA_DIST): Remove auto*.patches
 4510: 
 4511: Thu May 20 01:03:00 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4512: 
 4513: 	* Makefile.am (dist-hook): Call dos2unix on the .htm files
 4514: 
 4515: 	* ntpd/refclock_palisade.h: Clean up declarations.
 4516: 
 4517: 	* configure.in (ac_cv_struct_ntptimeval_timespec): Added.
 4518: 	(ac_cv_make_ntptime): Only if ntptimeval does not use timespec.
 4519: 
 4520: 	* util/tickadj.c: Linux Patches
 4521: 	From: Reg Clemens <reg@dwf.com>
 4522: 
 4523: Wed May 19 01:18:24 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4524: 
 4525: 	* configure.in: 4.0.93a
 4526: 
 4527: 	* ntpd/refclock_palisade.h: Restore some lost patches
 4528: 	From: Kamal A Mostafa <kamal@whence.com>
 4529: 
 4530: Sun May 16 13:18:32 1999  Philippe De Muyter  <phdm@macqel.be>
 4531: 
 4532: 	* libparse/clk_wharton.c (cvt_wharton_400a, inp_wharton_400a): Expect
 4533: 	serial output format number 1, not 5.
 4534: 	(clock_wharton_400a) : Likewise.
 4535: 	* ntpd/refclock_parse.c (parse_clockinfo): For Wharton 400a clock,
 4536: 	do not poll, but expect a message every second.
 4537: 	* html/parsedata.htm : Entry added for Wharton 400a clock.
 4538: 	* html/driver8.htm : Entry fixed for Wharton 400a clock.
 4539: 
 4540: Sun May 16 02:59:46 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4541: 
 4542: 	* configure.in: 4.0.93
 4543: 
 4544: Sat May 15 18:53:47 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4545: 
 4546: 	* configure.in (ntp_refclock): ONCORE requires PPSAPI, CIOGETEV,
 4547: 	or TIOCGPPSEV.
 4548: 	Reported by: Reg Clemens <reg@dwf.com>
 4549: 
 4550: Fri May 14 23:58:35 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4551: 
 4552: 	* configure.in: 4.0.92h2
 4553: 
 4554: 	* configure.in (ac_cv_make_ntptime): Not under Linux.  Yes, it
 4555: 	works for some people.  We're tired of the complaints from the
 4556: 	others.
 4557: 
 4558: Fri May 14 18:58:59 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4559: 
 4560: 	* libntp/authreadkeys.c (authreadkeys): Reject autokey keys.
 4561: 	Include ntp.h for NTP_MAXKEY definition, ntp_fp.h for types used
 4562: 	in ntp.h.
 4563: 
 4564: Wed May 12 23:02:22 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4565: 
 4566: 	* libntp/authkeys.c (auth_delkeys): Don't remove autokey keys,
 4567: 	leave info on KEY_TRUSTED flag alone.
 4568: 	Include ntp.h for NTP_MAXKEY definition.
 4569: 
 4570: Thu May 13 02:19:02 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4571: 
 4572: 	* configure.in: 4.0.92h1
 4573: 
 4574: 	* configure.in: patch for ReliantUNIX
 4575:  	From: Andrej Borsenkow <borsenkow.msk@sni.de>
 4576: 
 4577: 	* ntpd/refclock_oncore.c: Patches
 4578: 	From: Reg Clemens <reg@dwf.com>
 4579: 
 4580: Thu Apr 29 14:01:04 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4581: 
 4582: 	* html/*.htm: Remove unnecessary &nbsp;.  Cleanup <pre></pre>
 4583: 	sections.
 4584: 
 4585: 	* configure.in: Properly align configure --help output.
 4586: 	* html/config.htm: Include this version, removing Netscape &nbsp;
 4587: 	cruft.
 4588: 
 4589: Wed Apr 28 15:08:55 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4590: 
 4591: 	* kernel/sys/parsestreams.h: Only include <sys/ppsclock.h> if
 4592: 	struct ppsclockev is missing from system headers.
 4593: 
 4594: 	* util/tickadj.c (getoffsets): Define kernels[] only if used.
 4595: 	(openfile): Rename fd to avoid shadowing global fd.
 4596: 	(writevar): Likewise.
 4597: 	(readvar): Likewise.
 4598: 
 4599: 	* parseutil/dcfd.c (read_drift): drift_file is const char *.
 4600: 	(update_drift): Likewise.
 4601: 	(adjust_clock): Likewise.
 4602: 	(main): Likewise.
 4603: 
 4604: 	* ntpd/refclock_parse.c (gps16x_poll): Adapt format to match
 4605: 	parse->localstate type.
 4606: 
 4607: 	* ntpd/ntp_refclock.c (refclock_gtlin): Only define gotit label
 4608: 	if used.
 4609: 
 4610: 	* include/l_stdlib.h (openlog, syslog): char * args are const.
 4611: 
 4612: 	* configure.in (*-*-osf4*): Enable declaration of stime().
 4613: 
 4614: 	* ntpd/refclock_oncore.c (oncore_msg_any): Cast args to long to
 4615: 	match prototype.
 4616: 	(oncore_msg_En): Likewise.
 4617: 
 4618: 	* include/ntp_refclock.h (struct refclockstat): Declare p_lastcode
 4619: 	as const char *.
 4620: 
 4621: 	* ntpq/ntpq_ops.c (struct varlist): Define name as const.
 4622: 
 4623: 	* ntpdc/ntpdc.c (tokenize): Define cp as const char *, remove
 4624: 	wrong cast instead.
 4625: 
 4626: 	* ntpd/ntp_util.c (record_clock_stats): Make text arg const.
 4627: 	* include/ntpd.h (record_clock_stats): Adapt declaration.
 4628: 	* ntpd/refclock_oncore.c (oncore_start): Removed superfluous casts.
 4629: 	(oncore_msg_Cf): Likewise.
 4630: 	(oncore_msg_Fa): Likewise.
 4631: 	(oncore_msg_Cj): Likewise.
 4632: 	(oncore_msg_Ea): Likewise.
 4633: 	(oncore_msg_Bj): Likewise.
 4634: 
 4635: 	* configure.in (*-*-solaris2.4): Enable declarations of
 4636: 	gettimeofday(), settimeofday(); they are `protected' by
 4637: 	__cplusplus in <sys/time.h>.
 4638: 
 4639: Tue Apr 27 21:14:47 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4640: 
 4641: 	* scripts/summary.pl: Use . as default statsdir.
 4642: 	(do_loop): Accept new loopstats format with additional sys_error
 4643: 	and clock_stability fields.
 4644: 	(do_peer): Accept new peerstats format with additional skew field.
 4645: 
 4646: Mon Apr 26 01:50:38 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4647: 
 4648: 	* Upgraded automake (1.4a) and autoconf (2.14.1)
 4649: 
 4650: 	* configure.in (ac_refclock_irig): We no longer need stropts.h.
 4651: 	* ntpd/refclock_irig.c: Ditto
 4652: 
 4653: Mon Apr 26 17:33:33 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4654: 
 4655: 	* configure.in (*-*-irix6*): Don't pass MIPSpro cc-only flag -n32
 4656: 	to gcc.
 4657: 
 4658: Thu Apr 22 15:06:40 1999  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 4659: 
 4660: 	* ntpd/ntp_config.c (getconfig): IN_CLASSD() expects address in
 4661: 	host byte order, but struct sockaddr_in.s_addr is in network byte
 4662: 	order.
 4663: 	* ntpd/ntp_io.c (io_multicast_del): Likewise.
 4664: 
 4665: Sat Apr 24 01:00:53 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4666: 
 4667: 	* configure.in: 4.0.92h
 4668: 
 4669: 	* ntptrace/ntptrace.c: -m maxhost patch
 4670: 	From: "R. Gary Cutbill" <rgary@chrysalis.com>
 4671: 
 4672: 	* util/ntptime.c: Patches.
 4673: 	From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
 4674: 
 4675: 	* html/accopt.htm, html/assoc.htm, html/authopt.htm,
 4676: 	html/biblio.htm, html/build.htm, html/clockopt.htm,
 4677: 	html/confopt.htm, html/copyright.htm, html/debug.htm,
 4678: 	html/exec.htm, html/extern.htm, html/hints.htm, html/index.htm,
 4679: 	html/kern.htm, html/miscopt.htm, html/monopt.htm, html/notes.htm,
 4680: 	html/ntpd.htm, html/ntpdate.htm, html/ntpdc.htm, html/ntpq.htm,
 4681: 	html/ntptime.htm, html/ntptrace.htm, html/patches.htm,
 4682: 	html/porting.htm, html/pps.htm, html/rdebug.htm,
 4683: 	html/refclock.htm, html/release.htm, html/tickadj.htm,
 4684: 	html/hints/solaris.html: Fixed many typos and problems.
 4685: 	* acconfig.h (DECL_CFSETISPEED_0, DECL_MRAND48_0, DECL_NLIST_0,
 4686: 	DECL_SRAND48_0, DECL_STIME_0): New templates.
 4687: 	* include/l_stdlib.h: Include termios.h to get definition of
 4688: 	speed_t.
 4689: 	(cfsetispeed, cfsetospeed, mrand48, nlist, srand48, stime): New
 4690: 	declarations.
 4691: 	(openlog): Declare 2- or 3-argument form.
 4692: 	* configure.in: Enable declarations of functions missing from
 4693: 	Ultrix V4.3 system headers.
 4694: 	* ntpd/refclock_oncore.c: Include <sys/types.h>, Ultrix V4.3
 4695: 	<sys/stat.h> needs it for dev_t.
 4696: 	From: Rainer Orth <ro@techfak.uni-bielefeld.de>
 4697: 
 4698: 	* ntpdc/ntpdc_ops.c: Reality checks.
 4699: 
 4700: 	* configure.in: netbsd has stubs for the timer_* stuff and doesn't
 4701: 	support PPSAPI.  IRIG requires <stropts.h> .
 4702: 	From: Frederick Bruckman <fb@enteract.com>
 4703: 
 4704: 	* ntpdc/ntpdc_ops.c: (kerninfo)  Report in seconds regardless of
 4705: 	kernel precision.  Report kernel flags as text.
 4706: 	From: Poul-Henning Kamp <phk@critter.freebsd.dk>
 4707: 
 4708: Sun Apr 18 14:26:51 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4709: 
 4710: 	* configure.in: 4.0.92g
 4711: 
 4712: 	* ntpd/ntp_refclock.c (refclock_ioctl): We don't want
 4713: 	PPS_HARDPPSONASSERT by default.
 4714: 	* ntpd/refclock_oncore.c: Prefer timepps.h over sys/timepps.h
 4715: 	From: Poul-Henning Kamp <phk@freebsd.org>
 4716: 
 4717: Tue Apr 13 17:32:35 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4718: 
 4719: 	* configure.in: 4.0.92f
 4720: 
 4721: 	* ntpd/ntp_refclock.c (refclock_open): VMIN should be 1, not 0
 4722: 	From: Reg Clemens <reg@dwf.com>
 4723: 
 4724: Sun Apr 11 18:26:44 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4725: 
 4726: 	* ntpd/refclock_mx4200.c: Patches/improvements
 4727: 	* ntpd/ntpd.c (set_process_priority): Lint
 4728: 	From: Marc.Brett@westgeo.com
 4729: 
 4730: 	* util/ntptime.c: Lint, bit definition cleanup
 4731: 	From: Ulrich Windl <ulrich.windl@rz.uni-regensburg.de>
 4732: 
 4733: Wed Apr  7 03:02:23 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4734: 
 4735: 	* ntpd/refclock_oncore.c: Use timepps.h or sys/timepps.h
 4736: 	* configure.in: Look for either timepps.h or sys/timepps.h
 4737: 	From: Poul-Henning Kamp <phk@critter.freebsd.dk>
 4738: 
 4739: 	* ntpd/ntp_io.c (create_sockets): Don't warn about ENXIO.
 4740: 	(Several places)
 4741: 	From: Andrej Borsenkow <borsenkow.msk@sni.de>
 4742: 
 4743: 	* libntp/mfp_mul.c (mfp_mul): Lint.
 4744: 	Marc.Brett@westgeo.com
 4745: 
 4746: Sun Apr  4 03:23:53 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4747: 
 4748: 	* configure.in: 4.0.92e
 4749: 	Dave redesigned the clock state machine.
 4750: 
 4751: 1999-02-28  Frank Kardel  <kardel <AT> acm.org>
 4752: 
 4753: 	* parseutil/dcfd.c: added DCF77 module powersetup
 4754: 
 4755: 	* ntpd/refclock_parse.c (parse_control): using gmprettydate instead of prettydate()
 4756: 	(mk_utcinfo): new function for formatting GPS derived UTC information
 4757: 	(gps16x_message): changed to use mk_utcinfo()
 4758: 	(trimbletsip_message): changed to use mk_utcinfo()
 4759: 	ignoring position information in unsynchronized mode
 4760: 	(parse_start): augument linux support for optional ASYNC_LOW_LATENCY
 4761: 
 4762: 	* ntpd/ntp_control.c (ctl_putclock): cleanup of end of buffer handling
 4763: 
 4764: 	* libparse/parse.c (timepacket): removed unnecessary code
 4765: 
 4766: 	* libparse/clk_trimtsip.c (struct trimble): new member t_utcknown
 4767: 	(cvt_trimtsip): fixed status monitoring, bad receiver states are
 4768:  	now recognized
 4769: 
 4770: 	* libntp/prettydate.c (gmprettydate): new function for format date
 4771:  	and time with respect to UTC
 4772: 
 4773: 	* libntp/gpstolfp.c (GPSWRAP): update GPS rollover to 990 weeks
 4774: 
 4775: 	* include/trimble.h (CMD_RUTCPARAM): control variable name unification
 4776: 
 4777: 	* include/ntp_fp.h: added prototype for gmprettydate()
 4778: 
 4779: Sat Feb 27 00:03:16 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4780: 
 4781: 	* libntp/systime.c: definition
 4782: 	* ntpd/ntp_proto.c: sco5_oldclock declaration
 4783: 	* configure.in: SCO5_CLOCK for *-*-sco3.2v5*
 4784: 	* util/tickadj.c (main): SCO5_OLDCLOCK -> SCO5_CLOCK
 4785: 	From: Kees Hendrikse <kees@echelon.nl>
 4786: 
 4787: 	* ntpd/ntp_config.c (getconfig): Indentation cleanup
 4788: 	Deal with 'P' case better
 4789: 	* ntpd/ntpd.c: Declare set_process_priority()
 4790: 	* ntpd/refclock_dumbclock.c: Lint cleanup
 4791: 	From: Marc.Brett@westgeo.com
 4792: 
 4793: Wed Feb 24 10:22:51 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4794: 
 4795: 	* configure.in: 4.0.92d
 4796: 
 4797: 	* configure.in: Dave says we can't enable PARSE clocks by default.
 4798: 	Also, Solaris 2.7 still has its kernel bug - disable kernel FLL
 4799: 	there.
 4800: 	Reported by: Dave Mills <dlm@udel.edu>
 4801: 
 4802: Tue Feb 23 23:37:44 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4803: 
 4804: 	* libparse/Makefile.am (parsesolaris.o): Devious hack to deal
 4805: 	with bug in sys/systm.h .
 4806: 	Suggested by: Chaim Frenkel <chaimf@pobox.com>
 4807: 
 4808: Tue Feb 23 20:46:31 1999  Frank Kardel  <kardel <AT> acm.org>
 4809: 
 4810: 	* ntpd/refclock_parse.c: fixed #endifs
 4811: 	(stream_receive): fixed formats
 4812: 
 4813: Mon Feb 22 00:35:06 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4814: 
 4815: 	* configure.in: 4.0.92c
 4816: 
 4817: 	* ntpd/refclock_chronolog.c: Lint
 4818: 	* ntpd/refclock_dumbclock.c: Ditto
 4819: 	* ntpd/refclock_oncore.c: Ditto
 4820: 	From: Marc.Brett@westgeo.com
 4821: 
 4822: 	* ntpd/refclock_oncore.c (oncore_msg_any): Call GETTIMEOFDAY, not
 4823: 	gettimeofday().
 4824: 	From: david.higgins@mail.ccur.com
 4825: 
 4826: 	* configure.in (MCAST): Not in i386-sequent-sysv4
 4827: 	Reported by: Joseph Geter <joe.geter@somills.com>
 4828: 
 4829: 	* util/ntptime.c: Linux cleanup.
 4830: 	From: Reg Clemens <reg@dwf.com>
 4831: 
 4832: 	* configure.in: Rename SCO5_OLDCLOCK to SCO5_CLOCK
 4833: 	* acconfig.h: Ditto
 4834: 
 4835: 	* ntpd/ntp_proto.c: SCO5_CLOCK stuff
 4836: 	(init_proto): Use the SCO5_CLOCK stuff
 4837: 	* libntp/systime.c: SCO5_CLOCK stuff
 4838: 	(get_systime): Use the SCO5_CLOCK stuff
 4839: 	(adj_systime): Use the SCO5_CLOCK stuff
 4840: 	From: Kees Hendrikse <kees@echelon.nl>
 4841: 
 4842: 	* ntpd/ntp_config.c: Added -P option and associated baggage.
 4843: 	(getstartup): Update help text
 4844: 	(getconfig): Process -P option
 4845: 	(getconfig): Update help text
 4846: 	* ntpd/ntpd.c (set_process_priority): Created.
 4847: 	(service_main): remove process priority stuff - we want to do at
 4848: 	after we start up the resolver, so call set_process_priority()
 4849: 	after getconfig().
 4850: 	From: Kamal A Mostafa <kamal@whence.com>
 4851: 
 4852: 1999-02-21  Frank Kardel  <kardel <AT> acm.org>
 4853: 
 4854: 	* ntpd/ntp_util.c (hourly_stats): removed unused variable
 4855: 
 4856: 	* libntp/ieee754io.c: renamed index to fieldindex to avoid index() name clash
 4857: 
 4858: 	* ntpd/refclock_parse.c (parse_start): add initialization for Linux PPSkit
 4859: 
 4860: Sun Feb 21 17:53:33 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4861: 
 4862: 	* ntpd/ntp_io.c (create_sockets): Skip interfaces that are really
 4863: 	just aliases.
 4864: 	From: "Erik R. Leo" <erikl@sover.net>
 4865: 
 4866: 	* configure.in: 4.0.92b
 4867: 
 4868: 	* ntpd/ntpd.c (service_main): Check for an error return from
 4869: 	sched_get_priority_max().
 4870: 
 4871: Wed Feb 17 03:48:47 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4872: 
 4873: 	* configure.in: 4.0.92a
 4874: 
 4875: 	* configure.in: configure.in requires autoconf 2.13 or later.
 4876: 	Reported by Ulrich Windl <ulrich.windl@rz.uni-regensburg.de>
 4877: 
 4878: Wed Feb 17 00:12:11 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4879: 
 4880: 	* acconfig.h: TERMIOS_NEEDS__SVID3
 4881: 	* configure.in: Ditto
 4882: 	* ntpd/refclock_palisade.h: Ditto
 4883: 	* include/ntp_refclock.h: Ditto
 4884: 	* ntpd/ntpd.c (service_main): We want sched_get_priority_max().
 4885: 	From: Kamal A Mostafa <kamal@whence.com>
 4886: 
 4887: 	* ntpd/ntp_refclock.c (refclock_open): Zero the entire c_cc[] array.
 4888: 	From: Reg Clemens <reg@dwf.com>
 4889: 
 4890: Tue Feb 16 23:37:49 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4891: 
 4892: 	* Updated ansi2knr
 4893: 	Reported by: Marc Brett
 4894: 
 4895: Mon Feb 15 02:55:28 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4896: 
 4897: 	* configure.in: 4.0.92
 4898: 
 4899: 	* ntpd/ntp_refclock.c: Added refclock_chronolog and
 4900: 	refclock_dumbclock.
 4901: 	From: Robert McMillin <rlm@syseca-us.com>
 4902: 
 4903: Sun Feb 14 15:57:53 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4904: 
 4905: 	* dropped SCO3 support #defines.
 4906: 	* changed SCO5_TICKADJ #define to SCO5_OLDCLOCK
 4907: 	* Added code in libntp/systime.c to accumulate changes until a whole
 4908: 	  tick can be added or dropped. Adjusted gettimeofday() output
 4909: 	  to include the contents of the accumulator.
 4910: 	* cleaned up util/tickadj.c; tickadj -As now does the right thing.
 4911: 	From: Kees Hendrikse <kees@echelon.nl>
 4912: 
 4913: 	* ntpq/ntpq.c: Rename delay() to auth_delay()
 4914: 	Reported by: Andrej Borsenkow <borsenkow.msk@sni.de>
 4915: 
 4916: 	* ntpd/refclock_palisade.h: Cleanup.
 4917: 	From: Marc.Brett@westgeo.com
 4918: 
 4919: 	* ntpd/ntp_refclock.c (refclock_ioctl): Typo.
 4920: 	From: Reg Clemens <reg@dwf.com>
 4921: 
 4922: 	* ntpd/ntp_io.c (create_sockets): Only bind a given network once.
 4923: 	From: Wolfgang Rupprecht <wolfgang@wsrcc.com>
 4924: 
 4925: Sat Jan 30 11:48:37 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4926: 
 4927: 	* configure.in: 4.0.91f
 4928: 
 4929: Thu Jan 28 22:58:40 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4930: 
 4931: 	* ntpd/refclock_parse.c (CLK_REALTYPE): We really want ttl, not hmode.
 4932: 	* ntpd/ntp_config.c (getconfig): "mode" really should update the
 4933: 	ttl member, not the hmode member.
 4934: 
 4935: 	* ntpd/refclock_local.c: More offset cleanup from Dave.
 4936: 
 4937: Thu Jan 28 00:15:20 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4938: 
 4939: 	* configure.in: 4.0.91e
 4940: 
 4941: 	* ntpd/refclock_local.c: Bugfix.
 4942: 	From: Dave Mills
 4943: 
 4944: 	* ntpd/refclock_palisade.c: Lint/IRIX portability cleanup
 4945: 	* ntpd/refclock_palisade.h: Re-enable the declaration of float()
 4946: 	* ntpd/ntp_io.c (create_sockets): Initialize size to 0
 4947: 	From: Marc.Brett@westgeo.com
 4948: 
 4949: 	* ntpd/refclock_parse.c (CLK_REALTYPE): Use hmode, not ttl.
 4950: 	* configure.in (ac_cv_var_no_parenb_ignpar): Not under Linux.
 4951: 	Reported by: Thomas Quinot <thomas@Cuivre.FR.EU.ORG>
 4952: 
 4953: 	* ntpdc/ntpdc.c (my_delay): Renamed, from delay.
 4954: 	Reported by: Andrej Borsenkow <borsenkow.msk@sni.de>
 4955: 
 4956: Tue Jan 26 00:56:10 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4957: 
 4958: 	* configure.in: 4.0.91d
 4959: 
 4960: 	* ntpq/ntpq.c: Y2K patches
 4961: 	From: Marc.Brett@westgeo.com
 4962: 
 4963: 	* html/driver29.htm: New version
 4964: 	* ntpd/refclock_palisade.c: Ditto
 4965: 	* ntpd/refclock_palisade.h: Ditto
 4966: 	From: Sven_Dietrich@Trimble.COM
 4967: 
 4968: 	* upgrade ansi2knr.c
 4969: 
 4970: 	* Some stuff that Dave did.
 4971: 
 4972: 	* configure.in: 4.0.91c
 4973: 
 4974: 	* ntpd/refclock_oncore.c: Prototype cleanup.  Enum cleanup.
 4975: 	* ntpd/ntp_proto.c (clock_select): Fix memory leak.
 4976: 	* configure.in (ac_cv_struct_ppsclockev): Might need sys/time.h to
 4977: 	check for struct clockppsev.  Return pce->serial, not 0;
 4978: 	From: Marc.Brett@westgeo.com
 4979: 
 4980: 	* ntpd/refclock_oncore.c (oncore_msg_En): Clean up.
 4981: 	From: John.Hay@mikom.csir.co.za
 4982: 
 4983: Mon Jan 25 11:50:29 1999  Philippe De Muyter  <phdm@macqel.be>
 4984: 
 4985: 	* libparse/parse_conf.c (clockformats): Entry added for
 4986:  	clock_wharton_400a.
 4987: 	* libparse/clk_wharton.c: New file.
 4988: 	* libparse/Makefile.am (libparse_a_SOURCES): clk_wharton.c added;
 4989: 	(libparse_kernel_a_SOURCES): kclk_wharton.c added.
 4990: 	(kclk_wharton.o): New dependency rule.
 4991: 	* ntpd/refclock_parse.c (parse_clockinfo): Entry added for the
 4992: 	WHARTON clock (mode 15).
 4993: 	* acconfig.h (CLOCK_WHARTON_400A): New configuration macro.
 4994: 	* configure.in (CLOCK_WHARTON_400A): Macro defined like other
 4995: 	CLOCK_xxx macros.
 4996: 
 4997: Sun Jan 24 13:51:30 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 4998: 
 4999: 	* ntpd/ntp_config.c (do_resolve_internal): Missing #ifdef DEBUG
 5000: 	From: Sven Dietrich <Sven_Dietrich@Trimble.COM>
 5001: 
 5002: 	* Makefile.am (SUBDIRS): Lose authstuff
 5003: 	* configure.in: Ditto
 5004: 
 5005: Sat Jan 23 15:28:03 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5006: 
 5007: 	* configure.in: 4.0.91b
 5008: 
 5009: Sat Jan 23 15:02:25 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5010: 
 5011: 	* ntpd/refclock_oncore.c: use HAVE_STRUCT_PPSCLOCKEV
 5012: 	* acconfig.h: HAVE_STRUCT_PPSCLOCKEV
 5013: 	* configure.in (ac_cv_struct_ppsclockev): Added test
 5014: 
 5015: Thu Jan 21 15:35:25 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5016: 
 5017: 	* configure.in: 4.0.91a
 5018: 
 5019: 	* ntpd/refclock_nmea.c (nmea_receive): Call refclock_process()
 5020: 	every second (or each time a nmea string is received).
 5021: 	From: John Hay <jhay@mikom.csir.co.za>
 5022: 
 5023: 	* ntpd/ntp_refclock.c (refclock_ioctl): Use TIOCPPS if we have it.
 5024: 	(refclock_ioctl): Use LDISC_CLKPPS, not LDISC_PPS when deciding
 5025: 	how to set str.
 5026: 	* ntpd/ntp_loopfilter.c: Lose unused ntp_gettime() stuff.
 5027: 	* ntpd/ntp_request.c: Ditto.
 5028: 	* ntpd/refclock_local.c: Ditto.
 5029: 	* ntpd/refclock_shm.c (shm_poll): Fix the refclock_process() call.
 5030: 	* ntpd/refclock_oncore.c: patches and cleanup
 5031: 	* configure.in: ioctl/PPS checks, ONCORE cleanup
 5032: 	* acconfig.h: ONCORE cleanup
 5033: 	From: Reg Clemens <reg@dwf.com>
 5034: 
 5035: 	* configure.in (CFLAGS): cc on Sequent wants -Wc,+abi-socket.
 5036: 	We also need to figure out why -lsocket isn't being detected;
 5037: 	-lsocket is needed.
 5038: 	From: Dana Kaempen <decay@flash.net>
 5039: 
 5040: 	* include/ntp_stdlib.h: AIX portability patches, header cleanup.
 5041: 	* ntptrace/ntptrace.c: Ditto.
 5042: 	* ntpdate/ntpdate.c: Ditto.
 5043: 	* ntpd/refclock_true.c: Ditto.
 5044: 	* ntpd/refclock_mx4200.c: Ditto.
 5045: 	* ntpd/refclock_jupiter.c: Ditto.
 5046: 	* libntp/msyslog.c: Ditto.
 5047: 	From: Marc.Brett@waii.com
 5048: 
 5049: Sun Jan 10 15:15:07 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5050: 
 5051: 	* configure.in: 4.0.91
 5052: 
 5053: Sat Jan  9 00:11:34 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5054: 
 5055: 	* include/ntp_stdlib.h: msyslog() is declared differently if we're
 5056: 	not __STDC__.
 5057: 
 5058: 	* include/ntp_types.h: It's HAVE_PROTOTYPES, not USE_PROTOTYPES.
 5059: 	* include/ntp_machine.h: Ditto.
 5060: 
 5061: Fri Jan  8 20:47:10 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5062: 
 5063: 	* configure.in: Upgrade to autoconf-2.13
 5064: 	Do the prototypes check much earlier, as it might alter CFLAGS and
 5065:  	things which will affect other tests.
 5066: 
 5067: 	* ntpd/ntp_request.c (do_conf): The problem was with a template
 5068: 	for "version" on an IRIX C compiler...
 5069: 	From: Marc.Brett@waii.com
 5070: 
 5071: 	* libntp/authkeys.c: #include config.h first.
 5072: 	Reported by: brian.bumpass@funb.com
 5073: 
 5074: Thu Jan  7 00:24:35 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5075: 
 5076: 	* util/tickadj.c (main): return() instead of exit().
 5077: 	* ntpd/ntp_request.c (do_conf): Disambiguate ||.
 5078: 	* ntpd/ntp_proto.c (clock_select): Initialize variables.
 5079: 	From: Marc.Brett@waii.com
 5080: 
 5081: 	* scripts/ntpver.in: Use PATH_SH
 5082: 
 5083: 	* configure.in (PATH_SH): Added.
 5084: 
 5085: Tue Jan  5 19:02:51 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5086: 
 5087: 	* configure.in: 4.0.90h
 5088: 
 5089: 	* html/driver30.htm: Updated.
 5090: 	* html/refclock.htm: Refer to driver30
 5091: 	* ntpd/refclock_oncore.c: Vastly improve and make less FreeBSD centric,
 5092: 	From: Poul-Henning Kamp <phk@critter.freebsd.dk> and
 5093: 		Reg.Clemens <reg@dwf.com>
 5094: 
 5095: 	* include/ntp.h: Portability/lint patches
 5096: 	* libntp/binio.c: Ditto.
 5097: 	* libntp/caljulian.c: Ditto.
 5098: 	* libntp/caltontp.c: Ditto.
 5099: 	* libntp/ieee754io.c: Ditto.
 5100: 	* libntp/md5c.c: Ditto.
 5101: 	* libntp/mfp_mul.c: Ditto.
 5102: 	* libntp/msyslog.c: Ditto.
 5103: 	* libntp/statestr.c: Ditto.
 5104: 	* libntp/systime.c: Ditto.
 5105: 	* libparse/clk_trimtsip.c: Ditto.
 5106: 	* libparse/data_mbg.c: Ditto.
 5107: 	* libparse/parse.c: Ditto.
 5108: 	* ntpd/ntp_control.c: Ditto.
 5109: 	* ntpd/ntp_filegen.c: Ditto.
 5110: 	* ntpd/ntp_intres.c: Ditto.
 5111: 	* ntpd/ntp_io.c: Ditto.
 5112: 	* ntpd/ntp_peer.c: Ditto.
 5113: 	* ntpd/ntp_proto.c: Ditto.
 5114: 	* ntpd/ntp_util.c: Ditto.
 5115: 	* ntpd/ntpd.c: Ditto.
 5116: 	* ntpd/refclock_arc.c: Ditto.
 5117: 	* ntpd/refclock_chu.c: Ditto.
 5118: 	* ntpd/refclock_datum.c: Ditto.
 5119: 	* ntpd/refclock_leitch.c: Ditto.
 5120: 	* ntpd/refclock_parse.c: Ditto.
 5121: 	* ntpd/refclock_usno.c: Ditto.
 5122: 	* ntpq/ntpq.c: Ditto.
 5123: 	* util/tickadj.c: Ditto.
 5124: 	From: Marc.Brett@waii.com
 5125: 
 5126: Mon Jan  4 00:56:55 1999  Harlan Stenn  <stenn@whimsy.udel.edu>
 5127: 
 5128: 	* configure.in: 4.0.90g
 5129: 
 5130: 	* ntpd/ntp_config.c (getconfig): MODE was setting ttl, not hmode.
 5131: 	Reported by: Carsten Emde <ce@ceag.ch>
 5132: 
 5133: Fri Dec  4 01:01:14 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5134: 
 5135: 	* configure.in: 4.0.90f
 5136: 
 5137: 	* ntpd/refclock_mx4200.c: New version
 5138: 	From: Marc.Brett@waii.com
 5139: 
 5140: 1998-12-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 5141: 
 5142: 	* ntpd/ntp_config.c (do_resolve_internal): If fork fails, say why.
 5143: 	Reported by: Jeff_Dennison@admin.tc.faa.gov
 5144: 
 5145: 	* ntpd/ntpd.c (ntpdmain):  fork() can return a -1.  Someday we'll
 5146: 	report this condition...
 5147: 
 5148: 1998-12-02  Harlan Stenn  <stenn@whimsy.udel.edu>
 5149: 
 5150: 	* configure.in: 4.0.90e
 5151: 
 5152: 	* ntpd/refclock_palisade.c: Reformat code so ansi2knr will work
 5153: 	* ntpd/refclock_palisade.h: Ditto
 5154: 	From: Marc.Brett@waii.com
 5155: 
 5156: Sun Nov 29 21:00:53 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5157: 
 5158: 	* configure.in: 4.0.90d
 5159: 
 5160: 	* configure.in (CFLAGS): Use "-O2 -g3 -n32" by default for Irix6.2
 5161: 	and later.
 5162: 	Reported by: Jack Bryans <jbryans@csulb.edu>
 5163: 
 5164: 1998-11-29  Harlan Stenn  <stenn@whimsy.udel.edu>
 5165: 
 5166: 	* configure.in: 4.0.90c
 5167: 
 5168: 	* ntpd/refclock_oncore.c (oncore_msg_En): Convert to nano
 5169: 	From: John Hay <jhay@mikom.csir.co.za>
 5170: 
 5171: 	* include/ntp_request.h (RM_VN_MODE): Add version parameter, so
 5172: 	xntpdc will work across v3 and v4.
 5173: 	* ntpd/ntp_request.c: Track requested version
 5174: 	(req_ack): Use requested version in RM_VN_MODE
 5175: 	(more_pkt): Ditto
 5176: 	(flush_pkt): Ditto
 5177: 	(process_private): Get requested version
 5178: 	* ntpd/ntp_intres.c (request): Use default version
 5179: 	* ntpdc/ntpdc.c (sendrequest): Ditto
 5180: 	From: John Hay <jhay@mikom.csir.co.za>
 5181: 
 5182: Fri Nov 27 14:27:21 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5183: 
 5184: 	* ntpd/refclock_palisade.c: Lint cleanup
 5185: 	* ntpd/refclock_palisade.h: Ditto.
 5186: 	From: Marc Brett <mbrett@rgs0.london.waii.com>
 5187: 
 5188: Mon Nov 23 04:45:03 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5189: 
 5190: 	* configure.in: 4.0.90b
 5191: 
 5192: 	* New code and cleanup for the NT stuff
 5193: 	From: Carl Byington <carl@five-ten-sg.com>
 5194: 
 5195: Sat Nov 21 21:21:45 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5196: 
 5197: 	* configure.in: 4.0.90a
 5198: 
 5199: 	* libntp/systime.c (step_systime): net_set_tod calls clock_settime.
 5200: 	* libntp/machines.c (ntp_set_tod): Take a 2nd arg for NT.
 5201: 	* include/ntp_machine.h: ntp_set_tod() has 2 args always.
 5202: 	* ports/winnt/bldrel.bat: Typo.
 5203: 	From: Carl Byington <carl@five-ten-sg.com>
 5204: 
 5205: 	* ntpd/ntp_intres.c (findhostaddr): h_errno is a #define under AIX.
 5206: 	* configure.in:  clock_settime is a stub in AIX4.
 5207: 	From: Perry Ross <pross@platinum.com>
 5208: 
 5209: 	* libntp/Makefile.am (EXTRA_DIST): Lose libntp.mak
 5210: 	* ntpd/Makefile.am (EXTRA_DIST): Ditto.
 5211: 	* ntpdate/Makefile.am (EXTRA_DIST): Ditto.
 5212: 	* ntpdc/Makefile.am (EXTRA_DIST): Ditto.
 5213: 	* ntpq/Makefile.am (EXTRA_DIST): Ditto.
 5214: 	From: Greg Schueman <schueman@ix.netcom.com>
 5215: 
 5216: Sat Nov 21 12:33:16 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5217: 
 5218: 	* configure.in: 4.0.90
 5219: 
 5220: 	Nano changes from Dave Mills.
 5221: 
 5222: Thu Nov 19 04:23:46 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5223: 
 5224: 	* include/ntp_machine.h: STREAM also needs HAVE_SYS_STREAM_H
 5225: 	Reported by: Ronald Cole <ronald@forte-intl.com>
 5226: 
 5227: Mon Nov 16 19:17:34 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5228: 
 5229: 	* configure.in: 4.0.73e14
 5230: 
 5231: 	* util/ntptime.c (main): Protect STA_NANO
 5232: 
 5233: 	* ntpd/refclock_oncore.c: General overhaul and simplifications.
 5234: 	The new manual clarifies a lot of fine points, and the driver has
 5235: 	been suitably simplified.  Uses Site Survey if possible, otherwise
 5236: 	does it by hand.  Should also work with non-UT models, as long as
 5237: 	they talk the Motorola Binary Protocol.  The driver Doesn't (need
 5238: 	to) know where the author lives anymore.
 5239: 	From: Poul-Henning Kamp <phk@critter.freebsd.dk>
 5240: 
 5241: 	* ntpd/refclock_palisade.h: New version.
 5242: 	* ntpd/refclock_palisade.c: New version.
 5243: 	From: Sven Dietrich <Sven_Dietrich@Trimble.COM>
 5244: 
 5245: Sat Oct 24 01:19:21 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5246: 
 5247: 	* configure.in: 4.0.73e13
 5248: 
 5249: 	* ntpdc/ntpdc_ops.c (clkbug): Patches
 5250: 	* ntpd/ntp_refclock.c (refclock_buginfo): Patches
 5251: 	From: Marc.Brett@waii.com
 5252: 
 5253: Sat Oct 10 20:13:14 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5254: 
 5255: 	* configure.in: 4.0.73e12
 5256: 
 5257: 	* ntpd/ntp_util.c (hourly_stats): Added prio_set stuff.
 5258: 
 5259: 	* ntpd/ntpd.c (ntpdmain): HAVE_SETPGRP_0 typo.
 5260: 	* parseutil/dcfd.c (detach): Ditto.
 5261: 	* ntpd/ntp_control.c (ctl_putpeer): Sometimes, peer->dstadr is
 5262: 	NIL.
 5263: 	From: Perry Ross <pross@platinum.com>
 5264: 
 5265: 	* ntpd/ntpd.c:
 5266: 	Some systems use sys/sched.h, not sched.h (Irix)
 5267: 	* configure.in (CFLAGS): nextstep needs -posix.
 5268: 	Reported by: Jack Bryans <jbryans@csulb.edu>
 5269: 
 5270: Sat Oct  3 02:32:46 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5271: 
 5272: 	* configure.in: 4.0.73e11
 5273: 
 5274: 	* configure.in (ac_refclock_palisade): Needs termios.
 5275: 
 5276: 	* libntp/mktime.c: Some systems need sys/types.h
 5277: 
 5278: 	* configure.in: Added AC_TYPE_SIZE_T and AC_CHECK_TYPE(time_t, long)
 5279: 	The time_t stuff should only be needed on Older machines, so the
 5280: 	fact that I'm using a long shouldn't be a problem (hollow laugh).
 5281: 
 5282: 	* include/l_stdlib.h: Sometimes we need to #include <sys/types.h>
 5283: 
 5284: 	* libntp/Makefile.am (../include/des.h): Typo.
 5285: 
 5286: Fri Oct  2 20:52:47 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5287: 
 5288: 	* ntpd/ntp_intres.c (request): Accept responses back thru V2.
 5289: 
 5290: Thu Oct  1 00:11:16 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5291: 
 5292: 	* configure.in: 4.0.73e9
 5293: 
 5294: 	* ntpd/ntpd.c (catch_danger): Added.
 5295: 	(ntpdmain): AIX SIGDANGER stuff
 5296: 	From: Lars-Owe Ivarsson <larsowe@paradisaea.its.uu.se>
 5297: 
 5298: 	* configure.in:
 5299: 	* include/ntp_machine.h:
 5300: 	* include/ntp_string.h:
 5301: 	* libntp/machines.c:
 5302: 	* libparse/clk_hopf6021.c:
 5303: 	* libparse/clk_trimtsip.c:
 5304: 	* ntpd/refclock_leitch.c:
 5305: 	* ntpd/refclock_palisade.c:
 5306: 	* ntpd/refclock_parse.c:
 5307: 	Here are some patches to suppress warnings from various compilers
 5308: 	(IRIX 5.3, MipsPro C 7.1 on IRIX 6.4, AIX 4.1) and loaders (IRIX
 5309: 	5.3, IRIX 6.4).  Shouldn't affect functionality at all.
 5310: 	From: Marc Brett <mbrett@rgs0.london.waii.com>
 5311: 	(I got similar patches for AIX from Lars-Owe Ivarsson
 5312: 	<larsowe@paradisaea.its.uu.se>)
 5313: 
 5314: Thu Sep 24 21:33:50 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5315: 
 5316: 	* configure.in: '73e8
 5317: 
 5318: 	* configure.in: AIX4 stubs the POSIX timer_ stuff,
 5319: 	sched_setscheduler, and mlockall.
 5320: 	Reported by: Lars-Owe Ivarsson <larsowe@paradisaea.its.uu.se>
 5321: 
 5322: 	* configure.in: OpenBSD stubs the POSIX timer_ stuff.
 5323: 	Reported by:  sidney august cammeresi iv <cammeres@uiuc.edu>
 5324: 	(and several other folks whose names I can't find at the moment)
 5325: 
 5326: Mon Sep 21 15:35:23 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5327: 
 5328: 	* configure.in: '73e7
 5329: 
 5330: 	* ntpd/refclock_parse.c: Missing declaration
 5331: 	From: Marc Brett <mbrett@rgs0.london.waii.com>
 5332: 
 5333: 	* include/README: Remove old MCAST descriptions
 5334: 
 5335: 	* include/Makefile.am (noinst_HEADERS): Lose sun-in.h .
 5336: 
 5337: Mon Sep 21 14:50:12 1998  Harlan Stenn  <stenn@grundoon.udel.edu>
 5338: 
 5339: 	* ntpdate/ntpdate.c (timer): Properly format the definition.
 5340: 
 5341: Sun Sep 20 23:02:50 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5342: 
 5343: 	* configure.in: '73e6
 5344: 
 5345: 	* include/Makefile.am (noinst_HEADERS): Renamed in.h to sun-in.h
 5346: 
 5347: Fri Sep 18 01:05:55 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5348: 
 5349: 	* configure.in: '73e5
 5350: 
 5351: 	* ntpd/refclock_palisade.c: SCO patch
 5352: 	From: Kamal A Mostafa <kamalm@sco.com>
 5353: 
 5354: 	* libparse/clk_trimtsip.c (cvt_trimtsip): Fix rollover bug.
 5355: 	From: "Michael J. Tubby B.Sc. G8TIC" <Mike.Tubby@thorcom.co.uk>
 5356: 
 5357: 	* libntp/authencrypt.c:
 5358: 	* libntp/systime.c:
 5359: 	* ntpd/refclock_acts.c:
 5360: 	* ntpd/refclock_arbiter.c:
 5361: 	* ntpd/refclock_arc.c:
 5362: 	* ntpd/refclock_as2201.c:
 5363: 	* ntpd/refclock_atom.c:
 5364: 	* ntpd/refclock_chu.c:
 5365: 	* ntpd/refclock_conf.c:
 5366: 	* ntpd/refclock_datum.c:
 5367: 	* ntpd/refclock_heath.c:
 5368: 	* ntpd/refclock_hpgps.c:
 5369: 	* ntpd/refclock_irig.c:
 5370: 	* ntpd/refclock_leitch.c:
 5371: 	* ntpd/refclock_nmea.c:
 5372: 	* ntpd/refclock_palisade.c:
 5373: 	* ntpd/refclock_parse.c:
 5374: 	* ntpd/refclock_pst.c:
 5375: 	* ntpd/refclock_trak.c:
 5376: 	* ntpd/refclock_true.c:
 5377: 	* ntpd/refclock_usno.c:
 5378: 	* ntpd/refclock_wwvb.c:
 5379: 	Typos, cleanup, and bugfixes
 5380: 	From: Marc Brett <mbrett@rgs0.london.waii.com>
 5381: 
 5382: 	* ntpd/ntp_timer.c (timer): Typo.
 5383: 	* include/ntp_refclock.h: in refclockstat, clockdesc should be const.
 5384: 	* ntpd/ntp_io.c (create_sockets): Typo.
 5385: 	* ntpd/ntp_control.c (free_varlist): Use the appropriate cast when
 5386: 	calling free().
 5387: 	(set_var): Use char *td for non-const char data.
 5388: 	(ctl_getitem): Use char * for non-const data.
 5389: 	(Many of these reported by Marc Brett)
 5390: 
 5391: Sun Sep 13 19:19:09 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5392: 
 5393: 	* ntpd/ntpd.c: Added nofork declaration.
 5394: 	(ntpdmain): Initialize it...
 5395: 	* ntpd/ntp_config.c: added nofork.
 5396: 	Updated ntp_options.
 5397: 	(getstartup): Updated "usage" string.  Deal with -n flag.
 5398: 	(getconfig): Ditto.
 5399: 	From: Jeffrey Hutzelman <jhutz@cs.cmu.edu>
 5400: 
 5401: 	* ntpd/ntp_io.c (open_socket): Use ntoa() to print out the address
 5402: 	when bind() fails. (in 2 places)
 5403: 	Reported by: "Markus W. Fehr" <mfehr@ch.ibm.com>
 5404: 	Only soft-fail if an interface is unavailable.
 5405: 	(create_sockets):  Don't SO_REUSEADDR if the interface is unavailable.
 5406: 	From: "Markus W. Fehr" <mfehr@ch.ibm.com>
 5407: 
 5408: 	* configure.in:  If we --disable-all-clocks, then don't enable
 5409: 	parse clocks by default.
 5410: 	Reported by: Marion Hakanson <hakanson@cse.ogi.edu>
 5411: 
 5412: Sat Aug 22 23:58:14 1998  Frank Kardel  <kardel <AT> acm.org>
 5413: 
 5414: 	* ntpd/refclock_parse.c (local_input): fixed IO handling for non-STREAM IO
 5415: 
 5416: Sun Aug 16 20:13:32 1998  Frank Kardel  <kardel <AT> acm.org>
 5417: 
 5418: 	* libntp/ieee754io.c: debug information only compile for LIBDEBUG case
 5419: 
 5420: 	* ntpd/refclock_parse.c (gps16x_message): reduced UTC parameter information (dropped A0,A1)
 5421: 	made uval a local variable (killed one of the last globals)
 5422: 	(sendetx): added logging of messages when in debug mode
 5423: 	(trimble_check): added periodic checks to facilitate re-initialization
 5424: 	(trimbletsip_init): made use of EOL character if in non-kernel operation
 5425: 	(trimbletsip_message): extended message interpretation
 5426: 	(getdbl): fixed data conversion
 5427: 
 5428: 	* libparse/parse_conf.c (clockformats): Trimble TSIP driver now also
 5429: 	available for kernel operation
 5430: 
 5431: 	* libparse/info_trimble.c: re-generated
 5432: 
 5433: 	* libparse/clk_trimtsip.c (cvt_trimtsip): initial kernel capable version (no more floats)
 5434: 	(clock_trimtsip =): new format name
 5435: 
 5436: 	* libparse/clk_trimtaip.c (clock_trimtaip =): changed format name
 5437: 
 5438: 	* include/trimble.h (CMD_RSTATTRACK): renamed mode 6 variable name
 5439: 
 5440: 	* scripts/monitoring/ntploopwatch: moved emacs mode selector
 5441: 
 5442: Mon Aug 10 15:32:48 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5443: 
 5444: 	* ntpd/refclock_acts.c: Patch cleanup
 5445: 	* ntpd/ntp_refclock.c: Patch cleanup
 5446: 	* ntpd/ntp_timer.c: Patch cleanup
 5447: 	From: qli@huey.udel.edu
 5448: 
 5449: Wed Jul 29 15:23:21 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5450: 
 5451: 	* libntp/machines.c: IRIX needs time.h
 5452: 	Reported by: Judith E Bush <jbush@fi.edu>
 5453: 
 5454: 	* ntpd/ntpd.c (service_main): Better AIX PROCLOCK fix.
 5455: 	From: Matt Ladendorf <matt.ladendorf@anheuser-busch.com> and
 5456: 	Grover Davidson <Grover.Davidson@anheuser-busch.com>
 5457: 
 5458: Wed Jul 29 01:36:48 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5459: 
 5460: 	* include/ntpd.h (MAXINTERFACES): Moved here...
 5461: 	* ntpd/ntp_io.c: From here...
 5462: 	(create_sockets): Only deal with MAXINTERFACES.
 5463: 	(create_sockets): Only deal with specified interfaces.
 5464: 
 5465: 	* ntpd/ntp_config.c (CONFIG_LISTEN): Added
 5466: 	Added ifnum and listenaddrs[]
 5467: 	(getconfig): Added defn for "addr"
 5468: 	(getconfig): Initialize ifnum.
 5469: 
 5470: 	* ntpd/ntpd.c (service_main): call init_io after getconfig
 5471: 	From: Vebjorn Ljosa <ljosa@initio.no>
 5472: 
 5473: Wed Jul 29 00:42:28 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5474: 
 5475: 	* ntpd/refclock_palisade.c: Use NEED_HPUX9_TIOCM_STUFF
 5476: 
 5477: 	* acconfig.h (NEED_HPUX9_TIOCM_STUFF):  Added.
 5478: 
 5479: 	* configure.in (REFCLOCK_PALISADE): Needs termio*.h
 5480: 	(NEED_HPUX9_TIOCM_STUFF): Added.
 5481: 
 5482: 	* ntpd/ntp_io.c (create_sockets): Use strchr instead of strstr.
 5483: 
 5484: 	* libntp/mktime.c: #include <sys/types.h>
 5485: 
 5486: 	* libntp/ieee754io.c: #include <sys/types.h>
 5487: 
 5488: Wed Jul 29 00:24:22 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5489: 
 5490: 	* ntpd/refclock_acts.c (ACTS_MAXPOLL): 14 -> 18.
 5491: 	Import current_nextdate
 5492: 	(acts_receive): Update peer->nextdate with current_nextdate
 5493: 	(acts_poll): Call acts_timeout() (debugging)
 5494: 
 5495: 	* ntpd/ntp_refclock.c: Export current_nextdate.
 5496: 	(refclock_transmit): Check peer->valid >= NTP_SHIFT - 2, not >.
 5497: 	(refclock_transmit): hpoll wiggles, update current_nextdate
 5498: 
 5499: 	* ntpd/ntp_timer.c: #include "ntp_refclock.h"
 5500: 	(MODE_MANUAL): Added.
 5501: 	(timer): MODE_MANUAL stuff
 5502: 
 5503: 	From: qli@huey.udel.edu
 5504: 
 5505: Tue Jul 28 23:23:15 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5506: 
 5507: 	* configure.in: Check for inet_ntoa in -lbind .
 5508: 
 5509: 	* ntpd/ntpd.c: #undef PROCLOCK for AIX.
 5510: 
 5511: Mon Jul 20 01:06:24 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5512: 
 5513: 	* configure.in (AC_TYPE_SIZE_T): Added.
 5514: 
 5515: Sat Jul 11 09:38:30 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5516: 
 5517: 	* configure.in: 4.0.73e
 5518: 
 5519: 	* ports/winnt/: Replaced with new code (no SHM or PALISADE)
 5520: 	From: Greg Schueman <schueman@ix.netcom.com>
 5521: 
 5522: Fri Jul 10 12:12:59 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5523: 
 5524: 	* configure.in: 4.0.73d
 5525: 
 5526: 	* include/ntp_machine.h (HAVE_SRANDOM): VxWorks patches
 5527: 	(HAVE_RANDOM): Ditto.
 5528: 	(CALL): Ditto.
 5529: 	From: Casey Crellin <ccrellin@mweb.com>
 5530: 
 5531: 	* ntpd/refclock_parse.c (local_input): Typo.
 5532: 	Reported by: Tony Li <tony1@home.net>
 5533: 
 5534: Wed Jul  8 01:49:01 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5535: 
 5536: 	* configure.in: 4.0.73c
 5537: 
 5538: 	* PARSE patches from Frank Kardel
 5539: 
 5540: 	* libntp/machines.c (ntp_set_tod): Get it right.
 5541: 
 5542: Sun Jul  5 22:15:34 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5543: 
 5544: 	* configure.in: 4.0.73a
 5545: 
 5546: 	* kernel/sys/timex.h (MOD_CANSCALE): Add rest of patch to handle
 5547: 	scaling.
 5548: 	From: Poul-Henning Kamp <phk@critter.freebsd.dk>
 5549: 
 5550: Wed Jun 10 21:16:01 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5551: 
 5552: 	* configure.in: 4.0.73
 5553: 
 5554: 	* ntpd/ntp_loopfilter.c (local_clock): MOD_CANSCALE patches, and
 5555: 	be careful with the integration if we're nearly perfect.
 5556: 	From: Poul-Henning Kamp <phk@critter.freebsd.dk>
 5557: 
 5558: 	* util/tickadj.c (main): Typo fix...
 5559: 	From: Marion Hakanson <hakanson@cse.ogi.edu>
 5560: 
 5561: 	* ntpd/ntp_io.c (create_sockets): Attempt to ignore alias
 5562: 	interfaces.
 5563: 	From: Kenneth Maupin <maupin@easystreet.com>
 5564: 
 5565: 	* ntpd/ntp_refclock.c: PPS fixes
 5566: 	* ntpd/refclock_msfees.c (msfees_start): Portability fixes and
 5567: 	PPS/STREAM enhancements
 5568: 	From: John Hay <jhay@mikom.csir.co.za>
 5569: 
 5570: 	* ntpd/ntp_refclock.c (refclock_gtlin): Patch...
 5571: 	From: Jonathan Stone <jonathan@DSG.Stanford.EDU>
 5572: 
 5573: Sun Jun 28 18:43:30 1998  Frank Kardel  <kardel <AT> acm.org>
 5574: 
 5575: 	* libntp/buftvtots.c (buftvtots): using WORD_BIGENDIAN instead of XNTP_BIG_ENDIAN
 5576: 
 5577: 	* libparse/clk_trimtsip.c (getflt): fixed ENDIAN issue
 5578: 	(getdbl): fixed ENDIAN issue
 5579: 	(getint): use get_msb_short()
 5580: 	(cvt_trimtsip): use gpstolfp() for conversion
 5581: 
 5582: 	* libntp/Makefile.am (libntp_a_SOURCES): added gpstolfp.c source
 5583: 
 5584: 	* libntp/binio.c: added {get,put}_msb_{short,long}() functions
 5585: 
 5586: 	* include/ntp_fp.h: added gpstolfp() prototype
 5587: 
 5588: 	* include/binio.h: added binio MSB prototypes
 5589: 
 5590: Sat Jun 13 13:48:17 1998  Frank Kardel  <kardel <AT> acm.org>
 5591: 
 5592: 	* parseutil/testdcf.c: signed/unsigned
 5593: 	SYSV clock name clash fixed
 5594: 
 5595: 	* parseutil/dcfd.c: signed/unsigned
 5596: 	SYSV clock name clash fixed
 5597: 	year wrapping at 1998
 5598: 	ctype macros take ints as args
 5599: 
 5600: 	* ntptrace/ntptrace.c (decodeipaddr): ctype macros take ints as args
 5601: 
 5602: 	* ntpq/ntpq_ops.c (doprintpeers): signed/unsigned
 5603: 
 5604: 	* ntpq/ntpq.c: ctype macros take ints as args
 5605: 	signed/unsigned
 5606: 
 5607: 	* ntpdc/ntpdc.c: signed/unsigned
 5608: 
 5609: 	* ntpd/refclock_usno.c: signed/unsigned
 5610: 
 5611: 	* ntpd/refclock_true.c (true_send): signed/unsigned, name clashes
 5612: 
 5613: 	* ntpd/refclock_parse.c: signed/unsigned, name clashes
 5614: 
 5615: 	* ntpd/refclock_nmea.c (nmea_receive): ctype macros take ints as args
 5616: 
 5617: 	* ntpd/refclock_heath.c (heath_receive): prototypes (signed/unsigned issues)
 5618: 
 5619: 	* ntpd/refclock_arc.c: prototypes (signed/unsigned issues)
 5620: 
 5621: 	* ntpd/refclock_acts.c: prototypes (signed/unsigned issues)
 5622: 
 5623: 	* ntpd/ntpd.c: prototypes (signed/unsigned issues)
 5624: 
 5625: 	* ntpd/ntp_util.c (getauthkeys): prototypes (signed/unsigned issues)
 5626: 	fix SYSV clock name clash
 5627: 
 5628: 	* ntpd/ntp_request.c: prototypes (signed/unsigned issues)
 5629: 	fix SYSV clock name clash
 5630: 
 5631: 	* ntpd/ntp_io.c (input_handler): variable naming, signed/unsigned
 5632: 
 5633: 	* ntpd/ntp_intres.c (readconf): signed/unsigned issues
 5634: 
 5635: 	* ntpd/ntp_control.c: prototypes (signed/unsigned issues)
 5636: 	fix SYSV clock name clash
 5637: 
 5638: 	* ntpd/ntp_config.c: fix SYSV clock name clash
 5639:         ctype macros take ints as args
 5640: 
 5641: 	* libparse/parsestreams.c: dirt (debug) removed
 5642: 
 5643: 	* libparse/parsesolaris.c: more prototypes
 5644: 	fix name clashes
 5645: 	allow for ansi2knr
 5646: 
 5647: 	* libparse/parse.c: bcopy/memcpy cleanup
 5648: 	fix SYSV clock name clash
 5649: 
 5650: 	* libparse/clk_trimtsip.c (cvt_trimtsip): fix SYSV clock name clash
 5651: 
 5652: 	* libparse/clk_trimtaip.c (cvt_trimtaip): fix SYSV clock name clash
 5653: 
 5654: 	* libparse/clk_schmid.c (cvt_schmid): fix SYSV clock name clash
 5655: 
 5656: 	* libparse/clk_rcc8000.c (cvt_rcc8000): fix SYSV clock name clash
 5657: 
 5658: 	* libparse/clk_rawdcf.c (cvt_rawdcf): fix SYSV clock name clash
 5659: 
 5660: 	* libparse/clk_hopf6021.c (cvt_hopf6021): fix SYSV clock name clash
 5661: 
 5662: 	* libparse/clk_dcf7000.c (cvt_dcf7000): fix SYSV clock name clash
 5663: 
 5664: 	* libparse/clk_computime.c: fix SYSV clock name clash
 5665: 
 5666: 	* libntp/octtoint.c (octtoint): ctype macros take ints as args
 5667: 
 5668: 	* libntp/mstolfp.c (mstolfp): ctype macros take ints as args
 5669: 
 5670: 	* libntp/hextolfp.c (hextolfp): ctype macros take ints as args
 5671: 
 5672: 	* libntp/hextoint.c (hextoint): ctype macros take ints as args
 5673: 
 5674: 	* libntp/decodenetnum.c (decodenetnum): ctype macros take ints as args
 5675: 
 5676: 	* libntp/atouint.c (atouint): ctype macros take ints as args
 5677: 
 5678: 	* libntp/atolfp.c (atolfp): ctype macros take ints as args
 5679: 
 5680: 	* libntp/atoint.c (atoint): ctype macros take ints as args
 5681: 
 5682: 	* kernel/sys/parsestreams.h:  STREAM macro gone in favor of HAVE_SYS_STREAM_H
 5683: 
 5684: 	* include/parse.h: STREAM macro gone in favor of HAVE_SYS_STREAM_H
 5685: 
 5686: Fri Jun 12 11:08:53 1998  Frank Kardel  <kardel <AT> acm.org>
 5687: 
 5688: 	* ntpd/ntp_timer.c: prototype fixes (ansi2knr/knr compiler)
 5689: 
 5690: 	* ntpd/ntp_proto.c (make_keylist): type cast for e(!!!)malloc()
 5691: 
 5692: 	* libparse/Makefile.am: adjust for ansi2knr
 5693: 
 5694: 	* libntp/ieee754io.c: ansi2knr compatibility
 5695: 
 5696: 	* include/ntp_refclock.h: added pps_sample() extern declaration
 5697: 	added refclock_process_offset() extern declaration
 5698: 
 5699: 	* include/ntp.h: fixed function * prototypes
 5700: 
 5701: 	* ntpd/refclock_parse.c (bind): added input routine
 5702: 	(local_input): added input routine
 5703: 
 5704: 	* ntpd/ntp_io.c (input_handler): direct input processing for
 5705: 	refclocks to save input recv buffers
 5706: 
 5707: 	* include/ntp_refclock.h: added int io_input(struct recvbuf *)
 5708: 	pointer to allow direct processing of read refclock data in
 5709: 	order to save many bug recv buffers on single character input
 5710: 	(problem with "fast" machines)
 5711: 
 5712: 	* parse_conf.c:  conditional compile macros fixed
 5713: 
 5714: 	* parse.c:  conditional compile macros fixed
 5715: 	printf prototype
 5716: 
 5717: 	* clk_trimtaip.c:  conditional compile macros fixed
 5718: 	printf prototype
 5719: 
 5720: 	* clk_schmid.c:  conditional compile macros fixed
 5721: 	printf prototype
 5722: 
 5723: 	* clk_rcc8000.c:  conditional compile macros fixed
 5724: 	printf prototype
 5725: 
 5726: 	* clk_hopf6021.c:  conditional compile macros fixed
 5727: 	printf prototype
 5728: 
 5729: 	* clk_dcf7000.c: conditional compile macros fixed
 5730: 	printf prototype
 5731: 
 5732: 	* clk_computime.c: conditional compile macros fixed
 5733: 	printf prototype
 5734: 
 5735: Sat Jun  6 07:41:54 1998  Frank Kardel  <kardel <AT> acm.org>
 5736: 
 5737: 	* ntpd/refclock_palisade.c: fixed termio.h / termios.h inclusion
 5738: 
 5739: 	* include/ntp_refclock.h: made refclockproc/clockdesc const
 5740: 
 5741: 	* ntpd/ntp_control.c (ctl_putpeer): avoided ambigous 'else' (gcc)
 5742: 
 5743: 	* ntpd/refclock_parse.c (parse_start): added BURST mode initialisation
 5744: 
 5745: 	* scripts/stats/summary.sh (CLOCK): allow for Y2K log files
 5746: 
 5747: 	* libparse/clk_rawdcf.c: simplified condidional compile expression
 5748: 
 5749: Wed May 27 08:10:43 1998  Frank Kardel  <kardel <AT> acm.org>
 5750: 
 5751: 	* include/Makefile.am (noinst_HEADERS): added new header files
 5752: 	mbg_gps166.h binio.h ascii.h ieee754io.h
 5753: 
 5754: 	* ntpdc/ntpdc.c (sendrequest): fixed info_auth_keyid setting it
 5755: 	got accidentally trashed every other round
 5756: 
 5757: Mon May 25 22:55:07 1998  Frank Kardel  <kardel <AT> acm.org>
 5758: 
 5759: 	* configure.in: PARSE clocks are enabled by default whenever
 5760: 	possible (termio.h or termios.h present)
 5761: 	removed RAWDCF_SETDTR feature
 5762: 
 5763: 	* acconfig.h: removed RAWDCF_SETDTR option (now implicit by
 5764: 	compilation and run time configuration)
 5765: 
 5766: 	* ntpd/refclock_parse.c (rawdcf_init): offer a RAWDCF clock (type 14)
 5767: 	that attempts to set the DTR modem line for receiver power
 5768: 
 5769: 	* libparse/clk_meinberg.c (cvt_meinberg): support current standard
 5770: 	Meinberg data formats
 5771: 
 5772: Sun May 24 09:43:19 1998  Frank Kardel  <kardel <AT> acm.org>
 5773: 
 5774: 	* libparse/clk_rawdcf.c (pps_rawdcf): trigger pps on zero going
 5775: 	edge - that is simpler wiring (Rx->DCD).
 5776: 
 5777: 	* parseutil/testdcf.c (wday): const keyword
 5778: 
 5779: 	* parseutil/dcfd.c (cvt_rawdcf): sign issues and calling interfaces
 5780: 
 5781: 	* ntpq/ntpq.c (MAXVARLEN): adjusted internal buffer length for
 5782: 	variable values
 5783: 
 5784: 	* ntpd/refclock_parse.c: adjust to new io handling (fixed formats
 5785: 	only)
 5786: 	(mkreadable): don't include >"< in readable ASCII output (-> ntpq
 5787: 	parsing)
 5788: 	output debug messages to stdout instead of msyslog()
 5789: 	fixed version information string
 5790: 
 5791: 	* ntpd/refclock_atom.c (pps_sample): new auxiliary pps interface
 5792: 
 5793: 	* libparse/parsestreams.c (parserput): get event status consistent
 5794: 	with direct calls
 5795: 	(zs_xsisr): simulate CARRIER status to avoid unnecessary M_xHANGUP
 5796: 	events
 5797: 
 5798: 	* libparse/parsesolaris.c (parserput): get event status consistent
 5799: 	with direct calls
 5800: 	(zs_xsisr): simulate CARRIER status to avoid unnecessary M_xHANGUP
 5801: 	events
 5802: 
 5803: 	* libparse/parse.c: removed old input cruft
 5804: 	(parse_restart): new generic input help function
 5805: 	(parse_addchar): ditto
 5806: 	(parse_end): ditto
 5807: 	(pps_one): new generic pps help function
 5808: 	(pps_zero): ditto
 5809: 
 5810: 	* libparse/clk_trimtsip.c (clock_trimtsip =): new input handling
 5811: 
 5812: 	* libparse/clk_trimtaip.c (clock_trimtaip =): new input handling
 5813: 	(inp_trimtaip): new input handler
 5814: 
 5815: 	* libparse/clk_schmid.c (clock_schmid =): new input handling
 5816: 	(inp_schmid): new input handler
 5817: 
 5818: 	* libparse/clk_rcc8000.c (clock_rcc8000 =): new input handling
 5819: 	(inp_rcc8000): new input handler
 5820: 
 5821: 	* libparse/clk_rawdcf.c (clock_rawdcf =): new input handling
 5822: 	(snt_rawdcf): adjusted to new input handling
 5823: 	(inp_rawdcf): new input handler
 5824: 
 5825: 	* libparse/clk_meinberg.c (clock_meinberg): new input handling
 5826: 	(gps_input): new input handler
 5827: 	(mbg_input): new input handler
 5828: 
 5829: 	* libparse/clk_hopf6021.c (clock_hopf6021 =): new input handling
 5830: 	(inp_hopf6021): new input handler
 5831: 
 5832: 	* libparse/clk_dcf7000.c (clock_dcf7000 =): new input handling
 5833: 	(inp_dcf7000): new input handler
 5834: 
 5835: 	* libparse/clk_computime.c (clock_computime =): new input handling
 5836: 	(inp_computime): new input handler
 5837: 
 5838: 	* libparse/Makefile.am: link kernel module with libntp.a
 5839: 
 5840: 	* include/parse.h (struct parse): removed old data structure cruft
 5841: 	(new input model) new PARSE_INP* macros for input handling
 5842: 	removed old SYNC_* macros from old input model
 5843: 	(struct clockformat): removed old parse functions in favor of the
 5844: 	new input model
 5845: 	updated prototypes
 5846: 
 5847: 	* include/ntp_refclock.h: prototype for refclock_atom pps_sample()
 5848: 	interface
 5849: 
 5850: 	* acconfig.h: added PPS_SAMPLE define
 5851: 	* configure.in (LIBPARSE): added PPS_SAMPLE configuration
 5852: 	<refclock_atom aux interface>
 5853: 
 5854: 	* libntp/systime.c (adj_systime): debug output (> level 6) for
 5855: 	adjtime results
 5856: 
 5857: 	* libntp/mfp_mul.c (mfp_mul): controlled debug output
 5858: 
 5859: 	* libntp/ieee754io.c (get_byte): controlled debug output
 5860: 	(fetch_ieee754): ditto
 5861: 	(put_ieee754): ditto
 5862: 
 5863: Tue May  5 20:09:51 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5864: 
 5865: 	* configure.in: document DES is not usually present.
 5866: 
 5867: Wed Apr 29 22:00:22 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5868: 
 5869: 	* configure.in: 4.0.72h
 5870: 
 5871: 	* authstuff/Makefile.am (check-local-rsn): check-local doesn't
 5872: 	work with RSAREF...
 5873: 	Reported by: "Auteria Wally Winzer Jr." <wally.winzer@champusa.com>
 5874: 
 5875: 	* libntp/machines.c: the settime() choices were ordered badly.
 5876: 	Reported by: Michael Joosten <joost@c-lab.de>
 5877: 
 5878: Sat Apr 25 00:35:53 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5879: 
 5880: 	* configure.in (ac_cv_var_no_parenb_ignpar): Undo the kernel PLL
 5881: 	block I just installed - Dave wants to control this via
 5882: 	KERNEL_FLL_BUG.
 5883: 
 5884: Fri Apr 24 20:35:57 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5885: 
 5886: 	* libntp/Makefile.am (libntp_a_DEPENDENCIES): Set per libntp_a_LIBADD
 5887: 
 5888: 	* configure.in: Do a better job of blocking kernel PLL under
 5889: 	solaris2.6.
 5890: 
 5891: Fri Apr 24 00:41:12 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5892: 
 5893: 	* configure.in: 4.0.72f
 5894: 	(ac_cv_struct_nlist_n_un): Don't look for ntp_adjtime or
 5895: 	ntp_gettime under solaris2.6.
 5896: 
 5897: 	* ntpd/ntp_proto.c (process_packet): Give verbose error messages
 5898: 
 5899: 	* include/global.h (PROTOTYPES): Drive via HAVE_PROTOTYPES.
 5900: 
 5901: Wed Apr 22 16:55:55 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5902: 
 5903: 	* configure.in (ac_cv_var_use_des): Added. 4.0.72e.
 5904: 	* libntp/Makefile.am (libntp_a_LIBADD): Added DESOBJS
 5905: 
 5906: Tue Apr 21 02:08:06 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5907: 
 5908: 	* ntpd/refclock_arc.c (arc_receive): Typo...
 5909: 	From: Sam Steingold <sds@usa.net>
 5910: 
 5911: Fri Apr 10 03:05:35 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5912: 
 5913: 	* configure.in (ac_refclock_chu): AUDIO_CHU support.  Disabled by
 5914: 	default, and currently only supported on SunOS and Solaris.
 5915: 	* acconfig.h: AUDIO_CHU
 5916: 
 5917: Wed Apr  8 19:53:53 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5918: 
 5919: 	* libntp/Makefile.am (EXTRA_DIST): Added mktime.c
 5920: 
 5921: 	* configure.in:  AC_REPLACE_FUNCS(mktime).
 5922: 	(--enable-dst-minutes=60): Added, for (missing) mktime().
 5923: 
 5924: 	* ntpd/refclock_heath.c (heath_receive): Use mktime() instead of
 5925: 	the old hack.
 5926: 
 5927: Tue Apr  7 21:15:14 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5928: 
 5929: 	* configure.in (LIBOBJS): Hack it before AC_OUTPUT to deal with
 5930: 	ANSI2KNR-filtering rules.
 5931: 	From: Jim Meyering <meyering@ascend.com>
 5932: 
 5933: Mon Apr  6 01:40:45 1998  Harlan Stenn  <stenn@grundoon.udel.edu>
 5934: 
 5935: 	* libntp/strerror.c: ANSIfy strerror's definition.
 5936: 
 5937: Thu Mar 12 20:24:45 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5938: 
 5939: 	* libntp/statestr.c: Only #include <config.h> if HAVE_CONFIG_H is
 5940: 	#define'd.
 5941: 	From: Sven Dietrich <Sven_Dietrich@Trimble.COM>
 5942: 
 5943: Wed Mar 11 00:27:32 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5944: 
 5945: 	* configure.in: Cygwin needs to check for the advapi32 library.
 5946: 	NT doesn't support a root user, so don't bother with getuid().
 5947: 	Also, don't bother with umask().
 5948: 
 5949: 	* ntpd/ntp_io.c: cygwin32 patches
 5950: 	* ntpd/ntp_proto.c: Ditto.
 5951: 	* ntpd/ntpd.c: Ditto.
 5952: 	* ntpd/ntp_timer.c: Ditto.
 5953: 	* ntpdate/ntpdate.c: Ditto.
 5954: 	* libntp/machines.c: Ditto.
 5955: 	* libntp/systime.c: Ditto.
 5956: 	* include/ntp_machine.h: Ditto.
 5957: 	* include/ntp_unixtime.h: Ditto.
 5958: 	From: Sven Dietrich <Sven_Dietrich@Trimble.COM>
 5959: 
 5960: Tue Mar 10 22:26:14 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5961: 
 5962: 	* configure.in (ac_cv_make_tickadj): Added.
 5963: 	Now that tickadj is the only(?) utility that cares about tick and
 5964: 	tickadj, we don't need to have NOKMEM and no PRESET_* be fatal.
 5965: 
 5966: Sat Mar  7 02:57:17 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5967: 
 5968: 	* ntpd/ntp_loopfilter.c (local_clock): Patch STA_FLL check
 5969: 	From: Poul-Henning Kamp <phk@freebsd.org>
 5970: 
 5971: 	* various: Renamed ACTS to CLOCK_ACTS, ARBITER to CLOCK_ARBITER,
 5972: 	ARCRON_MSF to CLOCK_ARCRON_MSF, AS2201 to CLOCK_AS2201, BANC to
 5973: 	CLOCK_BANC, DATUM to CLOCK_DATUM, GPSVME to CLOCK_GPSVME, HEATH to
 5974: 	CLOCK_HEATH, HPGPS to CLOCK_HPGPS, IRIG to CLOCK_IRIG, JUPITER to
 5975: 	CLOCK_JUPITER, LEITCH to CLOCK_LEITCH, MSFEES to CLOCK_MSFEES,
 5976: 	MX4200 to CLOCK_MX4200, NMEA to CLOCK_NMEA, PALISADE to
 5977: 	CLOCK_PALISADE, PARSE to CLOCK_PARSE, PPS720 to CLOCK_PPS720, PST
 5978: 	to CLOCK_PST, PTBACTS to CLOCK_PTBACTS, SHM_CLOCK to CLOCK_SHM,
 5979: 	ONCORE to CLOCK_ONCORE, TPRO to CLOCK_TPRO, TRAK to CLOCK_TRAK,
 5980: 	TRUETIME to CLOCK_TRUETIME, USNO to CLOCK_USNO, WWVB to CLOCK_WWVB
 5981: 
 5982: 	* Makefile.am (ETAGS_ARGS): Added acconfig.h
 5983: 
 5984: 	* various: Renamed LOCAL_CLOCK to CLOCK_LOCAL.
 5985: 
 5986: 	* configure.in: First cut at  *-pc-cygwin32 support
 5987: 	Requested by: Sven Dietrich <Sven_Dietrich@Trimble.COM>
 5988: 
 5989: 	* configure.in: gdt-surveying code is gone.  Sigh.
 5990: 	Reported by: Poul-Henning Kamp <phk@critter.freebsd.dk>
 5991: 
 5992: Wed Mar  4 21:41:06 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5993: 
 5994: 	* many places: Renamed ATOM to CLOCK_ATOM
 5995: 
 5996: Tue Mar  3 03:18:13 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 5997: 
 5998: 	* ntpd/ntp_timer.c (timer): Only call refclock_transmit if
 5999: 	REFCLOCK is #define'd.
 6000: 	Reported by a bunch of folks.
 6001: 
 6002: Mon Mar  2 03:46:07 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6003: 
 6004: 	* configure.in (ntp_refclock): Use CLOCK_CHU, which no longer
 6005: 	needs any special headers.
 6006: 	* ntpd/refclock_chu.c: Call it CLOCK_CHU
 6007: 	(chu_receive): Define it correctly.
 6008: 
 6009: 	* include/winnt/sys/time.h (gettimeofday): Prototypes are OK.
 6010: 	(settimeofday): Prototypes are OK.
 6011: 	From: JJEVNISEK@qgraph.com
 6012: 
 6013: 	* ntpq/ntpq_ops.c: varlist name and value aren't const.
 6014: 	* ntpdc/ntpdc_ops.c (fudge): The flags are u_val, not val.
 6015: 	* ntpdc/ntpdc.c: const cleanup, exit cleanup.
 6016: 	* ntpd/refclock_wwvb.c (wwvb_receive): Move the definition of tz
 6017: 	somewhere more normal.
 6018: 	* ntpd/ntp_request.c (do_trustkey): kp gets u_long data, not
 6019: 	u_int32 (but Harlan thinks this patch may be wrong).
 6020: 	* ntpd/ntp_refclock.c (refclock_process): clocktime needs
 6021: 	offset.l_ui, not offset.l_i .
 6022: 	* ntpd/ntp_control.c (set_var): t isn't const.
 6023: 	* libntp/a_md5encrypt.c (session_key): Cast 2nd arg to MD5auth_setkey.
 6024: 	* include/ntpd.h: ctl_var's text field isn't const.
 6025: 	* include/ntp_refclock.h: clockdesc isn't const.
 6026: 	From: Marc Brett <Marc.Brett@waii.com>
 6027: 
 6028: 	* ntpd/ntp_loopfilter.c (local_clock): Limit ntv.constant to
 6029: 	MAXTC, and log error returns from ntp_adjtime.
 6030: 	From: Juha Sarlin <juha@c3l.tyreso.se>
 6031: 
 6032: Mon Mar  2 03:05:23 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6033: 
 6034: 	* configure.in (ac_cv_var_kernel_fll_bug): KERNEL_FLL_BUG
 6035: 	* acconfig.h: KERNEL_FLL_BUG: added.
 6036: 	* ntpd/ntp_loopfilter.c (local_clock): Only avoid STA_FLL if
 6037: 	KERNEL_FLL_BUG is #define'd (Solaris2.6)
 6038: 
 6039: Sat Feb 21 00:45:10 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6040: 
 6041: 	* automake-1.2d.patches: Added ansi2knr.o rules.
 6042: 
 6043: 	* ntpd/refclock_tpro.c: P() stuff
 6044: 
 6045: Fri Feb 20 20:10:20 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6046: 
 6047: 	* configure.in: Improve the ${CC} -pipe test (cygwin-32's gcc -pipe
 6048: 	silently does nothing).
 6049: 	Reported by: Sven Dietrich <Sven_Dietrich@Trimble.COM>
 6050: 
 6051: Wed Feb 18 00:51:08 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6052: 
 6053: * configure.in: 4.0.72 released.
 6054: 
 6055: * configure.in:AC_REPLACE_FUNCS(strerror), check for poll.h, and deal
 6056:   with the --enable-JUPITER stuff.
 6057: * libntp/Makefile.am (libntp_a_LIBADD): Added (for strerror support).
 6058: * libntp/clocktypes.c: Added REFCLK_GPS_JUPITER.
 6059: * ntpdate/ntpdate.c: poll() support
 6060: * ntpd/Makefile.am: Add refclock_jupiter.c
 6061: * ntpd/refclock_conf.c: Added refclock_jupiter
 6062: * ntpd/refclock_mx4200.c (mx4200_pps): Bugfixes.
 6063: * include/ntp.h (REFCLK_GPS_JUPITER): Added, and bumped REFCLK_MAX.
 6064:   From: Craig Leres <leres@ee.lbl.gov>
 6065: 
 6066: Mon Feb 16 21:02:42 1998  Harlan Stenn  <stenn@grundoon.udel.edu>
 6067: 
 6068: 	* ntpd/ntp_proto.c: P()
 6069: 
 6070: Mon Feb 16 12:43:11 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6071: 
 6072: * include/ntp_types.h: Added P() prototyping hack back in.
 6073: * include/parse.h: Ditto.
 6074: * include/ntpd.h:  Ditto.
 6075: * include/ntp_unixtime.h:  Ditto.
 6076: * include/ntp_stdlib.h: Ditto.
 6077: * include/ntp_select.h: Ditto.
 6078: * include/ntp_refclock.h: Ditto.
 6079: * include/ntp_fp.h: Ditto.
 6080: * include/md5.h: Ditto.
 6081: * include/ntp_filegen.h: Ditto.
 6082: * include/ntp_calendar.h: Ditto.
 6083: * include/l_stdlib.h: Ditto.
 6084: 
 6085: 	* configure.in (ACTS): Sometimes, TIOCMBIS is in sys/ioctl.h
 6086: 	  Reported by Kenneth Jaldehag <kenneth.jaldehag@sp.se>
 6087: 	* configure.in (HEATH): Ditto.
 6088: 	* configure.in (PTBACTS): Ditto.
 6089: 	* configure.in (USNO): Ditto.
 6090: 
 6091: Sat Feb 14 00:02:14 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6092: 
 6093: 	* ntpd/refclock_irig.c (irig_rf): Rename sincos[] to sin_cos[].
 6094: 
 6095: Fri Feb 13 22:22:08 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6096: 
 6097: 	* include/ntp.h (RANDPOLL): Use random or mrand48.
 6098: 	* ntpd/ntp_config.c (do_resolve_internal): Ditto.
 6099: 	* ntpd/ntp_peer.c (unpeer): Ditto.
 6100: 	* ntpd/ntp_proto.c (make_keylist): Ditto.
 6101: 
 6102: 	* ntpd/ntpd.c (xntpdmain): Use srandom or srand48.
 6103: 
 6104: 	* configure.in: Look for {s,}random() and [ms]rand48().
 6105: 
 6106: Wed Feb 11 22:50:24 1998  Harlan Stenn  <stenn@whimsy.udel.edu>
 6107: 
 6108: 	* ntpd/ntp_restrict.c (hack_restrict): Renamed restrict()
 6109: 	* include/ntpd.h: Ditto
 6110: 	* ntpd/ntp_request.c (do_restrict): Ditto
 6111: 	* ntpd/ntp_config.c (getconfig):
 6112: 	* ntpd/ntp_io.c (create_sockets): Ditto.
 6113: 
 6114: 1998-01-23  Harlan Stenn  <stenn@whimsy.udel.edu>
 6115: 
 6116: 	* ntpd/refclock_irig.c: Allow either <sun/audioio.h> or
 6117: 	<sys/audioio.h> .  From Dave Mills.
 6118: 
 6119: 	* configure.in: Under SunOS, it's sun/audioio.h .
 6120: 
 6121: 1998-01-22  Harlan Stenn  <stenn@whimsy.udel.edu>
 6122: 
 6123: 	* html/driver6.html: Updated header file info
 6124: 	* html/irig.html: Ditto.
 6125: 	* configure.in: sys/bsd_audioirig.h replaced with sys/audioio.h
 6126: 	for new irig driver that Dave installed.
 6127: 
 6128: 1998-01-08  Harlan Stenn  <stenn@whimsy.udel.edu>
 6129: 
 6130: 	* Many places: Lose the P(()) prototype stuff
 6131: 
 6132: 	* util/tickadj.c (writevar): Make offset an off_t
 6133: 	(readvar): Ditto
 6134: 	(getoffsets): Make offsets off_t
 6135: 
 6136: 	* adjtimed/adjtimed.c (GetClockRate): Fix lseek arg 2.
 6137: 	(SetClockRate): Ditto
 6138: 
 6139: 	* Many things in many places from many people.
 6140: 
 6141: 	* configure.in: Added AC_TYPE_OFF_T
 6142: 
 6143: 1997-11-26  Harlan Stenn  <stenn@whimsy.udel.edu>
 6144: 
 6145: 	* ntpd/refclock_palisade.c: ANSIfied.
 6146: 
 6147: Wed Sep  3 23:51:44 1997  Harlan Stenn  <stenn@whimsy.udel.edu>
 6148: 
 6149: 	* configure.in (AM_C_PROTOTYPES): Added.
 6150: 
 6151: 	* Makefile.am (AUTOMAKE_OPTIONS): Added ansi2knr.
 6152: 

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>