Annotation of embedaddon/ntp/html/hints/parse, revision 1.1.1.1
1.1 misho 1: Compilation:
2: Usual thing: rm -f Config.local ; make for vanilla
3: make refconf for reference clock (e. g. DCF77)
4:
5: Directory contents:
6:
7: hints/PARSE - this file
8:
9: xntpd/refclock_parse.c
10: - reference clock support for DCF77/GPS in xntp
11: parse/parse.c
12: - Reference clock data parser framework
13: parse/parse_conf.c
14: - parser configuration (clock types)
15: parse/clk_meinberg.c
16: - Meinberg clock formats (DCF U/A 31, PZF 535, GPS166)
17: parse/clk_schmid.c
18: - Schmid receiver (DCF77)
19: parse/clk_rawdcf.c
20: - 100/200ms pulses via 50 Baud line (DCF77)
21: parse/clk_dcf7000.c
22: - ELV DCF7000 (DCF77)
23: parse/clk_trimble.c
24: - Trimble SV6 GPS receiver
25:
26: If you want to add new clock types please check
27: with kardel@informatik.uni-erlangen.de. These files
28: implement the conversion of RS232 data streams into
29: timing information used by refclock_parse.c which is
30: mostly generic except for NTP configuration constants.
31:
32: parse/Makefile.kernel
33: - *SIMPLE* makefile to build a loadable STREAMS
34: module for SunOS 4.x / SunOS 5.x systems
35:
36: parse/parsestreams.c
37: - SUN Streams module (loadable) for radio clocks
38: This streams module is designed for SunOS 4.1.X.
39:
40: parse/parsesolaris.c
41: - SUN Streams module (loadable) for radio clocks.
42: This streams module is designed for SunOS 5.x
43: Beware this is still new - so it might crash
44: your machine (we have seen it working, though).
45:
46: parse/parsetest.c
47: - simple test program for STREAMS module. Its so simple,
48: that it doesn't even set TTY-modes, thus they got to
49: be correct on startup - works for Meinberg receivers
50:
51: parse/testdcf.c
52: - test program for raw DCF77 (100/200ms pulses)
53: receivers
54:
55: include/parse.h - interface to "parse" module and more
56: include/parse_conf.h
57: - interface to "parse" configuration
58:
59: include/sys/parsestreams.h
60: - STREAMS specific definitions
61:
62: scripts/support
63: - scripts (perl & sh) for statistics and rc startup
64: the startup scripts are used in Erlangen for
65: starting the daemon on a variety of Suns and HPs
66: and for Reference Clock startup on Suns
67: These scripts may or may not be helpful to you.
68:
69: Supported clocks:
70: Meinberg DCF U/A 31
71: Meinberg PZF535/TCXO (Software revision PZFUERL 4.6)
72: Meinberg PZF535/OCXO (Software revision PZFUERL 4.6)
73: Meinberg GPS166 (Software version for Uni-Erlangen)
74: ELV DCF7000 (not recommended - casual/emergency use only)
75: Conrad DCF77 receiver (email: time@informatik.uni-erlangen.de)
76: + level converter
77: TimeBrick (email: time@informatik.uni-erlangen.de)
78: Schmid Receiver Kit
79: Trimble SV6 GPS receiver
80:
81: Addresses:
82: Meinberg Funkuhren
83: Auf der Landwehr 22
84: 31812 Bad Pyrmont
85: Germany
86: Tel.: 05281/20 18
87: FAX: 05281/60 81 80
88:
89: ELV Kundenservice
90: Postfach 1000
91: 26787 Leer
92: Germany
93: Tel.: 0491/60 08 88
94:
95: Walter Schmidt
96: Eichwisrain 14
97: 8634 Hombrechtikon
98: Switzerland
99:
100: If you have problems mail to:
101:
102: time@informatik.uni-erlangen.de
103:
104: We'll help (conditions permitting)
105:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>