Return to parse CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / html / hints

ntp 4.2.6p5

    1: Compilation:
    2: 	Usual thing: rm -f Config.local ; make for vanilla
    3: 			make refconf for reference clock (e. g. DCF77)
    4: 
    5: Directory contents:
    6: 
    7: 	hints/PARSE	- this file
    8: 
    9: 	xntpd/refclock_parse.c
   10: 			- reference clock support for DCF77/GPS in xntp
   11: 	parse/parse.c
   12: 			- Reference clock data parser framework
   13: 	parse/parse_conf.c
   14: 			- parser configuration (clock types)
   15: 	parse/clk_meinberg.c
   16: 			- Meinberg clock formats (DCF U/A 31, PZF 535, GPS166)
   17: 	parse/clk_schmid.c
   18: 			- Schmid receiver (DCF77)
   19: 	parse/clk_rawdcf.c
   20: 			- 100/200ms pulses via 50 Baud line (DCF77)
   21: 	parse/clk_dcf7000.c
   22: 			- ELV DCF7000 (DCF77)
   23: 	parse/clk_trimble.c
   24: 			- Trimble SV6 GPS receiver
   25: 
   26: 			  If you want to add new clock types please check
   27: 			  with kardel@informatik.uni-erlangen.de. These files
   28: 			  implement the conversion of RS232 data streams into
   29: 			  timing information used by refclock_parse.c which is
   30: 			  mostly generic except for NTP configuration constants.
   31: 
   32: 	parse/Makefile.kernel
   33: 			- *SIMPLE* makefile to build a loadable STREAMS
   34: 			  module for SunOS 4.x / SunOS 5.x systems
   35: 
   36: 	parse/parsestreams.c
   37: 			- SUN Streams module (loadable) for radio clocks
   38: 			  This streams module is designed for SunOS 4.1.X.
   39: 
   40: 	parse/parsesolaris.c
   41: 			- SUN Streams module (loadable) for radio clocks.
   42: 			  This streams module is designed for SunOS 5.x
   43: 			  Beware this is still new - so it might crash
   44: 			  your machine (we have seen it working, though).
   45: 
   46: 	parse/parsetest.c
   47: 			- simple test program for STREAMS module. Its so simple,
   48: 			  that it doesn't even set TTY-modes, thus they got to
   49: 			  be correct on startup - works for Meinberg receivers
   50: 
   51: 	parse/testdcf.c
   52: 			- test program for raw DCF77 (100/200ms pulses)
   53: 			  receivers
   54: 
   55:         include/parse.h - interface to "parse" module and more
   56:         include/parse_conf.h
   57: 			- interface to "parse" configuration
   58: 
   59: 	include/sys/parsestreams.h
   60: 			- STREAMS specific definitions
   61: 
   62: 	scripts/support
   63: 			- scripts (perl & sh) for statistics and rc startup
   64: 			  the startup scripts are used in Erlangen for
   65: 			  starting the daemon on a variety of Suns and HPs
   66: 			  and for Reference Clock startup on Suns
   67: 			  These scripts may or may not be helpful to you.
   68: 
   69: Supported clocks:
   70: 	Meinberg DCF U/A 31
   71: 	Meinberg PZF535/TCXO	(Software revision PZFUERL 4.6)
   72: 	Meinberg PZF535/OCXO	(Software revision PZFUERL 4.6)
   73: 	Meinberg GPS166		(Software version for Uni-Erlangen)
   74: 	ELV DCF7000		(not recommended - casual/emergency use only)
   75: 	Conrad DCF77 receiver	(email: time@informatik.uni-erlangen.de)
   76: 	  + level converter
   77: 	TimeBrick		(email: time@informatik.uni-erlangen.de)
   78: 	Schmid Receiver Kit
   79: 	Trimble SV6 GPS receiver
   80: 
   81: Addresses:
   82:   Meinberg Funkuhren
   83:   Auf der Landwehr 22
   84:   31812 Bad Pyrmont
   85:   Germany
   86:   Tel.: 05281/20 18
   87:   FAX:  05281/60 81 80
   88: 
   89:   ELV Kundenservice
   90:   Postfach 1000
   91:   26787 Leer
   92:   Germany
   93:   Tel.: 0491/60 08 88
   94: 
   95:   Walter Schmidt
   96:   Eichwisrain 14
   97:   8634 Hombrechtikon
   98:   Switzerland
   99: 
  100: If you have problems mail to:
  101: 
  102: 	time@informatik.uni-erlangen.de
  103: 
  104: We'll help (conditions permitting)
  105: