Return to rs6000 CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / html / hints

Annotation of embedaddon/ntp/html/hints/rs6000, revision 1.1.1.1

1.1       misho       1: 15.7.1993
                      2: xntp3 compiles now again on AIX. I have disabled prototyping and added
                      3: the switch -D_NO_PROTO which disables prototyping in the system include
                      4: files.
                      5: 
                      6: Matthias Ernst  maer@nmr.lpc.ethz.ch
                      7: --------------------------------------------------------------------------------
                      8: Xntp version 3 now support the cc compiler for AIX.
                      9: The Config.aix will now use cc by default.  You can still compile xntp
                     10: with the bsd compiler by changing "COMP= cc" to "COMP= bsdcc" and
                     11: and removing the "-DSTUPID_SIGNAL" option from the "DEFS" option.
                     12: 
                     13: xntp and tickadj was also modified  so that the value of tickadj is read
                     14: form the kernel and can be set by tickadj.  For now I would not set 
                     15: tickadj below 40 us.   
                     16: 
                     17: Bill Jones 
                     18: jones@chpc.utexas.edu
                     19: -------------------------------------------------------------------------------
                     20: 
                     21: This is a modified version of xntp version 3 for the RS6000. It works for
                     22: AIX 3.2 and these are the same changes as have been applied tothe version 2
                     23: implementation of xntp. It works fine for us but I have not tested all of
                     24: the features, especially the local clock support for the RS6000 is not tested
                     25: at all.
                     26: 
                     27: Matthias Ernst, ETH-Zuerich, Switzerland  -  maer@nmr.lpc.ethz.ch
                     28: 
                     29: --------------------------------------------------------------------------------
                     30: 
                     31: Here the original README.rs6000 for the version 2 implementation:
                     32: 
                     33: A hacked version of xntp for the IBM RS/6000 under AIX 3.1 can be found
                     34: in xntp.rs6000.tar.Z. [ if still available at all - Frank Kardel 93/12/3 ]
                     35: 
                     36: This will not work on older versions of AIX due to a kernel bug;  to find
                     37: out whether you have the kernel bug, compile and run testrs6000.c (see
                     38: comments in the code for instructions).
                     39: 
                     40: xntp and testrs6000 require "bsdcc" to compile.  This is simply another
                     41: entry point into the xlc compiler with various options set for BSD
                     42: compatibility.  If your system does not have bsdcc, do the following:
                     43: 
                     44: link /bin/bsdcc to /bin/xlc
                     45: 
                     46: put the following into /etc/xlc.cfg:
                     47: 
                     48: * BSD compatibility
                     49: bsdcc:  use        = DEFLT
                     50:         crt        = /lib/crt0.o
                     51:         mcrt       = /lib/mcrt0.o
                     52:         gcrt       = /lib/gcrt0.o
                     53:         libraries  = -lbsd, -lc
                     54:         proflibs   = -L/lib/profiled,-L/usr/lib/profiled
                     55:         options    = -H512,-T512, -qlanglvl=extended, -qnoro, -D_BSD, -D_NONSTD_TYPES, -D_NO_PROTO, -tp,-B/lib/
                     56: