Annotation of embedaddon/ntp/include/Makefile.in, revision 1.1
1.1 ! misho 1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
! 6: # Inc.
! 7: # This Makefile.in is free software; the Free Software Foundation
! 8: # gives unlimited permission to copy and/or distribute it,
! 9: # with or without modifications, as long as this notice is preserved.
! 10:
! 11: # This program is distributed in the hope that it will be useful,
! 12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 14: # PARTICULAR PURPOSE.
! 15:
! 16: @SET_MAKE@
! 17:
! 18: VPATH = @srcdir@
! 19: pkgdatadir = $(datadir)/@PACKAGE@
! 20: pkgincludedir = $(includedir)/@PACKAGE@
! 21: pkglibdir = $(libdir)/@PACKAGE@
! 22: pkglibexecdir = $(libexecdir)/@PACKAGE@
! 23: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 24: install_sh_DATA = $(install_sh) -c -m 644
! 25: install_sh_PROGRAM = $(install_sh) -c
! 26: install_sh_SCRIPT = $(install_sh) -c
! 27: INSTALL_HEADER = $(INSTALL_DATA)
! 28: transform = $(program_transform_name)
! 29: NORMAL_INSTALL = :
! 30: PRE_INSTALL = :
! 31: POST_INSTALL = :
! 32: NORMAL_UNINSTALL = :
! 33: PRE_UNINSTALL = :
! 34: POST_UNINSTALL = :
! 35: build_triplet = @build@
! 36: host_triplet = @host@
! 37: subdir = include
! 38: DIST_COMMON = README $(noinst_HEADERS) $(srcdir)/Makefile.am \
! 39: $(srcdir)/Makefile.in
! 40: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 41: am__aclocal_m4_deps = $(top_srcdir)/sntp/libopts/m4/libopts.m4 \
! 42: $(top_srcdir)/m4/define_dir.m4 $(top_srcdir)/m4/libtool.m4 \
! 43: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
! 44: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
! 45: $(top_srcdir)/m4/ntp_cacheversion.m4 \
! 46: $(top_srcdir)/m4/ntp_dir_sep.m4 \
! 47: $(top_srcdir)/m4/ntp_lineeditlibs.m4 \
! 48: $(top_srcdir)/m4/ntp_openssl.m4 \
! 49: $(top_srcdir)/m4/ntp_vpathhack.m4 \
! 50: $(top_srcdir)/m4/os_cflags.m4 $(top_srcdir)/version.m4 \
! 51: $(top_srcdir)/configure.ac
! 52: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 53: $(ACLOCAL_M4)
! 54: mkinstalldirs = $(install_sh) -d
! 55: CONFIG_HEADER = $(top_builddir)/config.h
! 56: CONFIG_CLEAN_FILES =
! 57: CONFIG_CLEAN_VPATH_FILES =
! 58: SOURCES =
! 59: DIST_SOURCES =
! 60: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
! 61: html-recursive info-recursive install-data-recursive \
! 62: install-dvi-recursive install-exec-recursive \
! 63: install-html-recursive install-info-recursive \
! 64: install-pdf-recursive install-ps-recursive install-recursive \
! 65: installcheck-recursive installdirs-recursive pdf-recursive \
! 66: ps-recursive uninstall-recursive
! 67: HEADERS = $(noinst_HEADERS)
! 68: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
! 69: distclean-recursive maintainer-clean-recursive
! 70: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
! 71: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
! 72: distdir
! 73: ETAGS = etags
! 74: CTAGS = ctags
! 75: DIST_SUBDIRS = $(SUBDIRS)
! 76: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 77: am__relativize = \
! 78: dir0=`pwd`; \
! 79: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
! 80: sed_rest='s,^[^/]*/*,,'; \
! 81: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
! 82: sed_butlast='s,/*[^/]*$$,,'; \
! 83: while test -n "$$dir1"; do \
! 84: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
! 85: if test "$$first" != "."; then \
! 86: if test "$$first" = ".."; then \
! 87: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
! 88: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
! 89: else \
! 90: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
! 91: if test "$$first2" = "$$first"; then \
! 92: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
! 93: else \
! 94: dir2="../$$dir2"; \
! 95: fi; \
! 96: dir0="$$dir0"/"$$first"; \
! 97: fi; \
! 98: fi; \
! 99: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
! 100: done; \
! 101: reldir="$$dir2"
! 102: ACLOCAL = @ACLOCAL@
! 103: AMTAR = @AMTAR@
! 104: AR = @AR@
! 105: AUTOCONF = @AUTOCONF@
! 106: AUTOHEADER = @AUTOHEADER@
! 107: AUTOMAKE = @AUTOMAKE@
! 108: AWK = @AWK@
! 109: BINSUBDIR = @BINSUBDIR@
! 110: CC = @CC@
! 111: CCDEPMODE = @CCDEPMODE@
! 112: CFLAGS = @CFLAGS@
! 113: CHUTEST = @CHUTEST@
! 114: CLKTEST = @CLKTEST@
! 115: CPP = @CPP@
! 116: CPPFLAGS = @CPPFLAGS@
! 117: CYGPATH_W = @CYGPATH_W@
! 118: DCFD = @DCFD@
! 119: DEFS = @DEFS@
! 120: DEPDIR = @DEPDIR@
! 121: DLLTOOL = @DLLTOOL@
! 122: DSYMUTIL = @DSYMUTIL@
! 123: DUMPBIN = @DUMPBIN@
! 124: ECHO_C = @ECHO_C@
! 125: ECHO_N = @ECHO_N@
! 126: ECHO_T = @ECHO_T@
! 127: EDITLINE_LIBS = @EDITLINE_LIBS@
! 128: EF_LIBS = @EF_LIBS@
! 129: EF_PROGS = @EF_PROGS@
! 130: EGREP = @EGREP@
! 131: EXEEXT = @EXEEXT@
! 132: FGREP = @FGREP@
! 133: GREP = @GREP@
! 134: HAVE_INLINE = @HAVE_INLINE@
! 135: INSTALL = @INSTALL@
! 136: INSTALL_DATA = @INSTALL_DATA@
! 137: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 138: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 139: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 140: LCRYPTO = @LCRYPTO@
! 141: LD = @LD@
! 142: LDFLAGS = @LDFLAGS@
! 143: LIBOBJS = @LIBOBJS@
! 144: LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
! 145: LIBOPTS_DIR = @LIBOPTS_DIR@
! 146: LIBOPTS_LDADD = @LIBOPTS_LDADD@
! 147: LIBPARSE = @LIBPARSE@
! 148: LIBS = @LIBS@
! 149: LIBTOOL = @LIBTOOL@
! 150: LIPO = @LIPO@
! 151: LN_S = @LN_S@
! 152: LSCF = @LSCF@
! 153: LTLIBOBJS = @LTLIBOBJS@
! 154: MAKEINFO = @MAKEINFO@
! 155: MAKE_ADJTIMED = @MAKE_ADJTIMED@
! 156: MAKE_CHECK_LAYOUT = @MAKE_CHECK_LAYOUT@
! 157: MAKE_CHECK_Y2K = @MAKE_CHECK_Y2K@
! 158: MAKE_LIBNTPSIM = @MAKE_LIBNTPSIM@
! 159: MAKE_LIBPARSE = @MAKE_LIBPARSE@
! 160: MAKE_LIBPARSE_KERNEL = @MAKE_LIBPARSE_KERNEL@
! 161: MAKE_NTPDSIM = @MAKE_NTPDSIM@
! 162: MAKE_NTPSNMPD = @MAKE_NTPSNMPD@
! 163: MAKE_NTPTIME = @MAKE_NTPTIME@
! 164: MAKE_PARSEKMODULE = @MAKE_PARSEKMODULE@
! 165: MAKE_TICKADJ = @MAKE_TICKADJ@
! 166: MAKE_TIMETRIM = @MAKE_TIMETRIM@
! 167: MANIFEST_TOOL = @MANIFEST_TOOL@
! 168: MKDIR_P = @MKDIR_P@
! 169: NM = @NM@
! 170: NMEDIT = @NMEDIT@
! 171: OBJDUMP = @OBJDUMP@
! 172: OBJEXT = @OBJEXT@
! 173: OPENSSL = @OPENSSL@
! 174: OPENSSL_INC = @OPENSSL_INC@
! 175: OPENSSL_LIB = @OPENSSL_LIB@
! 176: OTOOL = @OTOOL@
! 177: OTOOL64 = @OTOOL64@
! 178: PACKAGE = @PACKAGE@
! 179: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 180: PACKAGE_NAME = @PACKAGE_NAME@
! 181: PACKAGE_STRING = @PACKAGE_STRING@
! 182: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 183: PACKAGE_URL = @PACKAGE_URL@
! 184: PACKAGE_VERSION = @PACKAGE_VERSION@
! 185: PATH_NET_SNMP_CONFIG = @PATH_NET_SNMP_CONFIG@
! 186: PATH_PERL = @PATH_PERL@
! 187: PATH_SEPARATOR = @PATH_SEPARATOR@
! 188: PATH_SH = @PATH_SH@
! 189: PATH_TEST = @PATH_TEST@
! 190: POSIX_SHELL = @POSIX_SHELL@
! 191: PROPDELAY = @PROPDELAY@
! 192: RANLIB = @RANLIB@
! 193: SED = @SED@
! 194: SET_MAKE = @SET_MAKE@
! 195: SHELL = @SHELL@
! 196: SNMP_CFLAGS = @SNMP_CFLAGS@
! 197: SNMP_CPPFLAGS = @SNMP_CPPFLAGS@
! 198: SNMP_LIBS = @SNMP_LIBS@
! 199: STRIP = @STRIP@
! 200: TESTDCF = @TESTDCF@
! 201: VERSION = @VERSION@
! 202: YACC = @YACC@
! 203: YFLAGS = @YFLAGS@
! 204: abs_builddir = @abs_builddir@
! 205: abs_srcdir = @abs_srcdir@
! 206: abs_top_builddir = @abs_top_builddir@
! 207: abs_top_srcdir = @abs_top_srcdir@
! 208: ac_ct_AR = @ac_ct_AR@
! 209: ac_ct_CC = @ac_ct_CC@
! 210: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
! 211: am__include = @am__include@
! 212: am__leading_dot = @am__leading_dot@
! 213: am__quote = @am__quote@
! 214: am__tar = @am__tar@
! 215: am__untar = @am__untar@
! 216: bindir = @bindir@
! 217: build = @build@
! 218: build_alias = @build_alias@
! 219: build_cpu = @build_cpu@
! 220: build_os = @build_os@
! 221: build_vendor = @build_vendor@
! 222: builddir = @builddir@
! 223: datadir = @datadir@
! 224: datarootdir = @datarootdir@
! 225: docdir = @docdir@
! 226: dvidir = @dvidir@
! 227: exec_prefix = @exec_prefix@
! 228: host = @host@
! 229: host_alias = @host_alias@
! 230: host_cpu = @host_cpu@
! 231: host_os = @host_os@
! 232: host_vendor = @host_vendor@
! 233: htmldir = @htmldir@
! 234: includedir = @includedir@
! 235: infodir = @infodir@
! 236: install_sh = @install_sh@
! 237: libdir = @libdir@
! 238: libexecdir = @libexecdir@
! 239: localedir = @localedir@
! 240: localstatedir = @localstatedir@
! 241: mandir = @mandir@
! 242: mkdir_p = @mkdir_p@
! 243: oldincludedir = @oldincludedir@
! 244: pdfdir = @pdfdir@
! 245: prefix = @prefix@
! 246: program_transform_name = @program_transform_name@
! 247: psdir = @psdir@
! 248: sbindir = @sbindir@
! 249: sharedstatedir = @sharedstatedir@
! 250: srcdir = @srcdir@
! 251: subdirs = @subdirs@
! 252: sysconfdir = @sysconfdir@
! 253: target_alias = @target_alias@
! 254: top_build_prefix = @top_build_prefix@
! 255: top_builddir = @top_builddir@
! 256: top_srcdir = @top_srcdir@
! 257: NULL =
! 258: AUTOMAKE_OPTIONS =
! 259: ETAGS_ARGS = $(srcdir)/Makefile.am
! 260: EXTRA_DIST = autogen-version.def copyright.def debug-opt.def homerc.def version.def version.texi
! 261: SUBDIRS = isc
! 262: noinst_HEADERS = \
! 263: adjtime.h \
! 264: audio.h \
! 265: ascii.h \
! 266: audio.h \
! 267: binio.h \
! 268: gps.h \
! 269: hopf6039.h \
! 270: icom.h \
! 271: ieee754io.h \
! 272: iosignal.h \
! 273: l_stdlib.h \
! 274: lib_strbuf.h \
! 275: mbg_gps166.h \
! 276: mx4200.h \
! 277: ntif.h \
! 278: ntp.h \
! 279: ntp_assert.h \
! 280: ntp_calendar.h \
! 281: ntp_cmdargs.h \
! 282: ntp_config.h \
! 283: ntp_control.h \
! 284: ntp_crypto.h \
! 285: ntp_data_structures.h \
! 286: ntp_datum.h \
! 287: ntp_debug.h \
! 288: ntp_filegen.h \
! 289: ntp_fp.h \
! 290: ntp_if.h \
! 291: ntp_intres.h \
! 292: ntp_io.h \
! 293: ntp_libopts.h \
! 294: ntp_lineedit.h \
! 295: ntp_lists.h \
! 296: ntp_machine.h \
! 297: ntp_malloc.h \
! 298: ntp_md5.h \
! 299: ntp_net.h \
! 300: ntp_proto.h \
! 301: ntp_random.h \
! 302: ntp_refclock.h \
! 303: ntp_request.h \
! 304: ntp_rfc2553.h \
! 305: ntp_select.h \
! 306: ntp_sprintf.h \
! 307: ntp_stdlib.h \
! 308: ntp_string.h \
! 309: ntp_syscall.h \
! 310: ntp_syslog.h \
! 311: ntp_tty.h \
! 312: ntp_types.h \
! 313: ntp_unixtime.h \
! 314: ntpd.h \
! 315: ntpsim.h \
! 316: parse.h \
! 317: parse_conf.h \
! 318: recvbuff.h \
! 319: refclock_atom.h \
! 320: ssl_applink.c \
! 321: timepps-SCO.h \
! 322: timepps-Solaris.h \
! 323: timepps-SunOS.h \
! 324: trimble.h \
! 325: $(NULL)
! 326:
! 327: all: all-recursive
! 328:
! 329: .SUFFIXES:
! 330: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
! 331: @for dep in $?; do \
! 332: case '$(am__configure_deps)' in \
! 333: *$$dep*) \
! 334: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
! 335: && { if test -f $@; then exit 0; else break; fi; }; \
! 336: exit 1;; \
! 337: esac; \
! 338: done; \
! 339: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
! 340: $(am__cd) $(top_srcdir) && \
! 341: $(AUTOMAKE) --foreign include/Makefile
! 342: .PRECIOUS: Makefile
! 343: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 344: @case '$?' in \
! 345: *config.status*) \
! 346: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
! 347: *) \
! 348: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
! 349: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
! 350: esac;
! 351:
! 352: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! 353: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 354:
! 355: $(top_srcdir)/configure: $(am__configure_deps)
! 356: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 357: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
! 358: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
! 359: $(am__aclocal_m4_deps):
! 360:
! 361: mostlyclean-libtool:
! 362: -rm -f *.lo
! 363:
! 364: clean-libtool:
! 365: -rm -rf .libs _libs
! 366:
! 367: # This directory's subdirectories are mostly independent; you can cd
! 368: # into them and run `make' without going through this Makefile.
! 369: # To change the values of `make' variables: instead of editing Makefiles,
! 370: # (1) if the variable is set in `config.status', edit `config.status'
! 371: # (which will cause the Makefiles to be regenerated when you run `make');
! 372: # (2) otherwise, pass the desired values on the `make' command line.
! 373: $(RECURSIVE_TARGETS):
! 374: @fail= failcom='exit 1'; \
! 375: for f in x $$MAKEFLAGS; do \
! 376: case $$f in \
! 377: *=* | --[!k]*);; \
! 378: *k*) failcom='fail=yes';; \
! 379: esac; \
! 380: done; \
! 381: dot_seen=no; \
! 382: target=`echo $@ | sed s/-recursive//`; \
! 383: list='$(SUBDIRS)'; for subdir in $$list; do \
! 384: echo "Making $$target in $$subdir"; \
! 385: if test "$$subdir" = "."; then \
! 386: dot_seen=yes; \
! 387: local_target="$$target-am"; \
! 388: else \
! 389: local_target="$$target"; \
! 390: fi; \
! 391: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 392: || eval $$failcom; \
! 393: done; \
! 394: if test "$$dot_seen" = "no"; then \
! 395: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
! 396: fi; test -z "$$fail"
! 397:
! 398: $(RECURSIVE_CLEAN_TARGETS):
! 399: @fail= failcom='exit 1'; \
! 400: for f in x $$MAKEFLAGS; do \
! 401: case $$f in \
! 402: *=* | --[!k]*);; \
! 403: *k*) failcom='fail=yes';; \
! 404: esac; \
! 405: done; \
! 406: dot_seen=no; \
! 407: case "$@" in \
! 408: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! 409: *) list='$(SUBDIRS)' ;; \
! 410: esac; \
! 411: rev=''; for subdir in $$list; do \
! 412: if test "$$subdir" = "."; then :; else \
! 413: rev="$$subdir $$rev"; \
! 414: fi; \
! 415: done; \
! 416: rev="$$rev ."; \
! 417: target=`echo $@ | sed s/-recursive//`; \
! 418: for subdir in $$rev; do \
! 419: echo "Making $$target in $$subdir"; \
! 420: if test "$$subdir" = "."; then \
! 421: local_target="$$target-am"; \
! 422: else \
! 423: local_target="$$target"; \
! 424: fi; \
! 425: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
! 426: || eval $$failcom; \
! 427: done && test -z "$$fail"
! 428: tags-recursive:
! 429: list='$(SUBDIRS)'; for subdir in $$list; do \
! 430: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
! 431: done
! 432: ctags-recursive:
! 433: list='$(SUBDIRS)'; for subdir in $$list; do \
! 434: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
! 435: done
! 436:
! 437: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
! 438: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 439: unique=`for i in $$list; do \
! 440: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 441: done | \
! 442: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 443: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 444: mkid -fID $$unique
! 445: tags: TAGS
! 446:
! 447: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 448: $(TAGS_FILES) $(LISP)
! 449: set x; \
! 450: here=`pwd`; \
! 451: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
! 452: include_option=--etags-include; \
! 453: empty_fix=.; \
! 454: else \
! 455: include_option=--include; \
! 456: empty_fix=; \
! 457: fi; \
! 458: list='$(SUBDIRS)'; for subdir in $$list; do \
! 459: if test "$$subdir" = .; then :; else \
! 460: test ! -f $$subdir/TAGS || \
! 461: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
! 462: fi; \
! 463: done; \
! 464: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 465: unique=`for i in $$list; do \
! 466: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 467: done | \
! 468: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 469: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 470: shift; \
! 471: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
! 472: test -n "$$unique" || unique=$$empty_fix; \
! 473: if test $$# -gt 0; then \
! 474: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 475: "$$@" $$unique; \
! 476: else \
! 477: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 478: $$unique; \
! 479: fi; \
! 480: fi
! 481: ctags: CTAGS
! 482: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 483: $(TAGS_FILES) $(LISP)
! 484: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 485: unique=`for i in $$list; do \
! 486: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 487: done | \
! 488: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
! 489: END { if (nonempty) { for (i in files) print i; }; }'`; \
! 490: test -z "$(CTAGS_ARGS)$$unique" \
! 491: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
! 492: $$unique
! 493:
! 494: GTAGS:
! 495: here=`$(am__cd) $(top_builddir) && pwd` \
! 496: && $(am__cd) $(top_srcdir) \
! 497: && gtags -i $(GTAGS_ARGS) "$$here"
! 498:
! 499: distclean-tags:
! 500: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
! 501:
! 502: distdir: $(DISTFILES)
! 503: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 504: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 505: list='$(DISTFILES)'; \
! 506: dist_files=`for file in $$list; do echo $$file; done | \
! 507: sed -e "s|^$$srcdirstrip/||;t" \
! 508: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 509: case $$dist_files in \
! 510: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 511: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 512: sort -u` ;; \
! 513: esac; \
! 514: for file in $$dist_files; do \
! 515: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 516: if test -d $$d/$$file; then \
! 517: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 518: if test -d "$(distdir)/$$file"; then \
! 519: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 520: fi; \
! 521: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 522: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
! 523: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
! 524: fi; \
! 525: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
! 526: else \
! 527: test -f "$(distdir)/$$file" \
! 528: || cp -p $$d/$$file "$(distdir)/$$file" \
! 529: || exit 1; \
! 530: fi; \
! 531: done
! 532: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 533: if test "$$subdir" = .; then :; else \
! 534: test -d "$(distdir)/$$subdir" \
! 535: || $(MKDIR_P) "$(distdir)/$$subdir" \
! 536: || exit 1; \
! 537: fi; \
! 538: done
! 539: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
! 540: if test "$$subdir" = .; then :; else \
! 541: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
! 542: $(am__relativize); \
! 543: new_distdir=$$reldir; \
! 544: dir1=$$subdir; dir2="$(top_distdir)"; \
! 545: $(am__relativize); \
! 546: new_top_distdir=$$reldir; \
! 547: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
! 548: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
! 549: ($(am__cd) $$subdir && \
! 550: $(MAKE) $(AM_MAKEFLAGS) \
! 551: top_distdir="$$new_top_distdir" \
! 552: distdir="$$new_distdir" \
! 553: am__remove_distdir=: \
! 554: am__skip_length_check=: \
! 555: am__skip_mode_fix=: \
! 556: distdir) \
! 557: || exit 1; \
! 558: fi; \
! 559: done
! 560: check-am: all-am
! 561: check: check-recursive
! 562: all-am: Makefile $(HEADERS)
! 563: installdirs: installdirs-recursive
! 564: installdirs-am:
! 565: install: install-recursive
! 566: install-exec: install-exec-recursive
! 567: install-data: install-data-recursive
! 568: uninstall: uninstall-recursive
! 569:
! 570: install-am: all-am
! 571: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 572:
! 573: installcheck: installcheck-recursive
! 574: install-strip:
! 575: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 576: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
! 577: `test -z '$(STRIP)' || \
! 578: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
! 579: mostlyclean-generic:
! 580:
! 581: clean-generic:
! 582:
! 583: distclean-generic:
! 584: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
! 585: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
! 586:
! 587: maintainer-clean-generic:
! 588: @echo "This command is intended for maintainers to use"
! 589: @echo "it deletes files that may require special tools to rebuild."
! 590: clean: clean-recursive
! 591:
! 592: clean-am: clean-generic clean-libtool mostlyclean-am
! 593:
! 594: distclean: distclean-recursive
! 595: -rm -f Makefile
! 596: distclean-am: clean-am distclean-generic distclean-tags
! 597:
! 598: dvi: dvi-recursive
! 599:
! 600: dvi-am:
! 601:
! 602: html: html-recursive
! 603:
! 604: html-am:
! 605:
! 606: info: info-recursive
! 607:
! 608: info-am:
! 609:
! 610: install-data-am:
! 611:
! 612: install-dvi: install-dvi-recursive
! 613:
! 614: install-dvi-am:
! 615:
! 616: install-exec-am:
! 617:
! 618: install-html: install-html-recursive
! 619:
! 620: install-html-am:
! 621:
! 622: install-info: install-info-recursive
! 623:
! 624: install-info-am:
! 625:
! 626: install-man:
! 627:
! 628: install-pdf: install-pdf-recursive
! 629:
! 630: install-pdf-am:
! 631:
! 632: install-ps: install-ps-recursive
! 633:
! 634: install-ps-am:
! 635:
! 636: installcheck-am:
! 637:
! 638: maintainer-clean: maintainer-clean-recursive
! 639: -rm -f Makefile
! 640: maintainer-clean-am: distclean-am maintainer-clean-generic
! 641:
! 642: mostlyclean: mostlyclean-recursive
! 643:
! 644: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 645:
! 646: pdf: pdf-recursive
! 647:
! 648: pdf-am:
! 649:
! 650: ps: ps-recursive
! 651:
! 652: ps-am:
! 653:
! 654: uninstall-am:
! 655:
! 656: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
! 657: install-am install-strip tags-recursive
! 658:
! 659: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
! 660: all all-am check check-am clean clean-generic clean-libtool \
! 661: ctags ctags-recursive distclean distclean-generic \
! 662: distclean-libtool distclean-tags distdir dvi dvi-am html \
! 663: html-am info info-am install install-am install-data \
! 664: install-data-am install-dvi install-dvi-am install-exec \
! 665: install-exec-am install-html install-html-am install-info \
! 666: install-info-am install-man install-pdf install-pdf-am \
! 667: install-ps install-ps-am install-strip installcheck \
! 668: installcheck-am installdirs installdirs-am maintainer-clean \
! 669: maintainer-clean-generic mostlyclean mostlyclean-generic \
! 670: mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
! 671: uninstall uninstall-am
! 672:
! 673:
! 674: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 675: # Otherwise a system limit (for SysV at least) may be exceeded.
! 676: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / include