Annotation of embedaddon/ntp/include/parse.h, revision 1.1
1.1 ! misho 1: /*
! 2: * /src/NTP/REPOSITORY/ntp4-dev/include/parse.h,v 4.12 2007/01/14 08:36:03 kardel RELEASE_20070114_A
! 3: *
! 4: * parse.h,v 4.12 2007/01/14 08:36:03 kardel RELEASE_20070114_A
! 5: *
! 6: * Copyright (c) 1995-2005 by Frank Kardel <kardel <AT> ntp.org>
! 7: * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universität Erlangen-Nürnberg, Germany
! 8: *
! 9: * Redistribution and use in source and binary forms, with or without
! 10: * modification, are permitted provided that the following conditions
! 11: * are met:
! 12: * 1. Redistributions of source code must retain the above copyright
! 13: * notice, this list of conditions and the following disclaimer.
! 14: * 2. Redistributions in binary form must reproduce the above copyright
! 15: * notice, this list of conditions and the following disclaimer in the
! 16: * documentation and/or other materials provided with the distribution.
! 17: * 3. Neither the name of the author nor the names of its contributors
! 18: * may be used to endorse or promote products derived from this software
! 19: * without specific prior written permission.
! 20: *
! 21: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
! 22: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 23: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 24: * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
! 25: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
! 26: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
! 27: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
! 28: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
! 29: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
! 30: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
! 31: * SUCH DAMAGE.
! 32: *
! 33: */
! 34:
! 35: #ifndef __PARSE_H__
! 36: #define __PARSE_H__
! 37: #if !(defined(lint) || defined(__GNUC__))
! 38: static char parsehrcsid[]="parse.h,v 4.12 2007/01/14 08:36:03 kardel RELEASE_20070114_A";
! 39: #endif
! 40:
! 41: #include "ntp_types.h"
! 42:
! 43: #include "parse_conf.h"
! 44:
! 45: /*
! 46: * we use the following datastructures in two modes
! 47: * either in the NTP itself where we use NTP time stamps at some places
! 48: * or in the kernel, where only struct timeval will be used.
! 49: */
! 50: #undef PARSEKERNEL
! 51: #if defined(KERNEL) || defined(_KERNEL)
! 52: #ifndef PARSESTREAM
! 53: #define PARSESTREAM
! 54: #endif
! 55: #endif
! 56: #if defined(PARSESTREAM) && defined(HAVE_SYS_STREAM_H)
! 57: #define PARSEKERNEL
! 58: #endif
! 59: #ifdef PARSEKERNEL
! 60: #ifndef _KERNEL
! 61: extern caddr_t kmem_alloc (unsigned int);
! 62: extern caddr_t kmem_free (caddr_t, unsigned int);
! 63: extern unsigned int splx (unsigned int);
! 64: extern unsigned int splhigh (void);
! 65: extern unsigned int splclock (void);
! 66: #define MALLOC(_X_) (char *)kmem_alloc(_X_)
! 67: #define FREE(_X_, _Y_) kmem_free((caddr_t)_X_, _Y_)
! 68: #else
! 69: #include <sys/kmem.h>
! 70: #define MALLOC(_X_) (char *)kmem_alloc(_X_, KM_SLEEP)
! 71: #define FREE(_X_, _Y_) kmem_free((caddr_t)_X_, _Y_)
! 72: #endif
! 73: #else
! 74: #define MALLOC(_X_) malloc(_X_)
! 75: #define FREE(_X_, _Y_) free(_X_)
! 76: #endif
! 77:
! 78: #if defined(PARSESTREAM) && defined(HAVE_SYS_STREAM_H)
! 79: #include <sys/stream.h>
! 80: #include <sys/stropts.h>
! 81: #else /* STREAM */
! 82: #include <stdio.h>
! 83: #include "ntp_syslog.h"
! 84: #ifdef DEBUG
! 85: #define DD_PARSE 5
! 86: #define DD_RAWDCF 4
! 87: #define parseprintf(LEVEL, ARGS) if (debug > LEVEL) printf ARGS
! 88: #else /* DEBUG */
! 89: #define parseprintf(LEVEL, ARGS)
! 90: #endif /* DEBUG */
! 91: #endif /* PARSESTREAM */
! 92:
! 93: #if defined(timercmp) && defined(__GNUC__)
! 94: #undef timercmp
! 95: #endif
! 96:
! 97: #if !defined(timercmp)
! 98: #define timercmp(tvp, uvp, cmp) \
! 99: ((tvp)->tv_sec cmp (uvp)->tv_sec || \
! 100: ((tvp)->tv_sec == (uvp)->tv_sec && (tvp)->tv_usec cmp (uvp)->tv_usec))
! 101: #endif
! 102:
! 103: #ifndef TIMES10
! 104: #define TIMES10(_X_) (((_X_) << 3) + ((_X_) << 1))
! 105: #endif
! 106:
! 107: /*
! 108: * state flags
! 109: */
! 110: #define PARSEB_POWERUP 0x00000001 /* no synchronisation */
! 111: #define PARSEB_NOSYNC 0x00000002 /* timecode currently not confirmed */
! 112:
! 113: /*
! 114: * time zone information
! 115: */
! 116: #define PARSEB_ANNOUNCE 0x00000010 /* switch time zone warning (DST switch) */
! 117: #define PARSEB_DST 0x00000020 /* DST in effect */
! 118: #define PARSEB_UTC 0x00000040 /* UTC time */
! 119:
! 120: /*
! 121: * leap information
! 122: */
! 123: #define PARSEB_LEAPDEL 0x00000100 /* LEAP deletion warning */
! 124: #define PARSEB_LEAPADD 0x00000200 /* LEAP addition warning */
! 125: #define PARSEB_LEAPS 0x00000300 /* LEAP warnings */
! 126: #define PARSEB_LEAPSECOND 0x00000400 /* actual leap second */
! 127: /*
! 128: * optional status information
! 129: */
! 130: #define PARSEB_ALTERNATE 0x00001000 /* alternate antenna used */
! 131: #define PARSEB_POSITION 0x00002000 /* position available */
! 132: #define PARSEB_MESSAGE 0x00004000 /* addtitional message data */
! 133: /*
! 134: * feature information
! 135: */
! 136: #define PARSEB_S_LEAP 0x00010000 /* supports LEAP */
! 137: #define PARSEB_S_ANTENNA 0x00020000 /* supports antenna information */
! 138: #define PARSEB_S_PPS 0x00040000 /* supports PPS time stamping */
! 139: #define PARSEB_S_POSITION 0x00080000 /* supports position information (GPS) */
! 140:
! 141: /*
! 142: * time stamp availability
! 143: */
! 144: #define PARSEB_TIMECODE 0x10000000 /* valid time code sample */
! 145: #define PARSEB_PPS 0x20000000 /* valid PPS sample */
! 146:
! 147: #define PARSE_TCINFO (PARSEB_ANNOUNCE|PARSEB_POWERUP|PARSEB_NOSYNC|PARSEB_DST|\
! 148: PARSEB_UTC|PARSEB_LEAPS|PARSEB_ALTERNATE|PARSEB_S_LEAP|\
! 149: PARSEB_S_LOCATION|PARSEB_TIMECODE|PARSEB_MESSAGE)
! 150:
! 151: #define PARSE_POWERUP(x) ((x) & PARSEB_POWERUP)
! 152: #define PARSE_NOSYNC(x) (((x) & (PARSEB_POWERUP|PARSEB_NOSYNC)) == PARSEB_NOSYNC)
! 153: #define PARSE_SYNC(x) (((x) & (PARSEB_POWERUP|PARSEB_NOSYNC)) == 0)
! 154: #define PARSE_ANNOUNCE(x) ((x) & PARSEB_ANNOUNCE)
! 155: #define PARSE_DST(x) ((x) & PARSEB_DST)
! 156: #define PARSE_UTC(x) ((x) & PARSEB_UTC)
! 157: #define PARSE_LEAPADD(x) (PARSE_SYNC(x) && (((x) & PARSEB_LEAPS) == PARSEB_LEAPADD))
! 158: #define PARSE_LEAPDEL(x) (PARSE_SYNC(x) && (((x) & PARSEB_LEAPS) == PARSEB_LEAPDEL))
! 159: #define PARSE_ALTERNATE(x) ((x) & PARSEB_ALTERNATE)
! 160: #define PARSE_LEAPSECOND(x) (PARSE_SYNC(x) && ((x) & PARSEB_LEAP_SECOND))
! 161:
! 162: #define PARSE_S_LEAP(x) ((x) & PARSEB_S_LEAP)
! 163: #define PARSE_S_ANTENNA(x) ((x) & PARSEB_S_ANTENNA)
! 164: #define PARSE_S_PPS(x) ((x) & PARSEB_S_PPS)
! 165: #define PARSE_S_POSITION(x) ((x) & PARSEB_S_POSITION)
! 166:
! 167: #define PARSE_TIMECODE(x) ((x) & PARSEB_TIMECODE)
! 168: #define PARSE_PPS(x) ((x) & PARSEB_PPS)
! 169: #define PARSE_POSITION(x) ((x) & PARSEB_POSITION)
! 170: #define PARSE_MESSAGE(x) ((x) & PARSEB_MESSAGE)
! 171:
! 172: /*
! 173: * operation flags - lower nibble contains fudge flags
! 174: */
! 175: #define PARSE_TRUSTTIME CLK_FLAG1 /* use flag1 to indicate the time2 references mean the trust time */
! 176: #define PARSE_CLEAR CLK_FLAG2 /* use flag2 to control pps on assert */
! 177: #define PARSE_PPSKERNEL CLK_FLAG3 /* use flag3 to bind PPS to kernel */
! 178: #define PARSE_LEAP_DELETE CLK_FLAG4 /* use flag4 to force leap deletion - only necessary when earth slows down */
! 179:
! 180: #define PARSE_FIXED_FMT 0x10 /* fixed format */
! 181: #define PARSE_PPSCLOCK 0x20 /* try to get PPS time stamp via ppsclock ioctl */
! 182:
! 183: /*
! 184: * size of buffers
! 185: */
! 186: #define PARSE_TCMAX 400 /* maximum addition data size */
! 187:
! 188: typedef union
! 189: {
! 190: struct timeval tv; /* timeval - kernel view */
! 191: l_fp fp; /* fixed point - ntp view */
! 192: } timestamp_t;
! 193:
! 194: /*
! 195: * standard time stamp structure
! 196: */
! 197: struct parsetime
! 198: {
! 199: u_long parse_status; /* data status - CVT_OK, CVT_NONE, CVT_FAIL ... */
! 200: timestamp_t parse_time; /* PARSE timestamp */
! 201: timestamp_t parse_stime; /* telegram sample timestamp */
! 202: timestamp_t parse_ptime; /* PPS time stamp */
! 203: long parse_usecerror; /* sampled usec error */
! 204: u_long parse_state; /* current receiver state */
! 205: unsigned short parse_format; /* format code */
! 206: unsigned short parse_msglen; /* length of message */
! 207: unsigned char parse_msg[PARSE_TCMAX]; /* original messages */
! 208: };
! 209:
! 210: typedef struct parsetime parsetime_t;
! 211:
! 212: /*---------- STREAMS interface ----------*/
! 213:
! 214: #ifdef HAVE_SYS_STREAM_H
! 215: /*
! 216: * ioctls
! 217: */
! 218: #define PARSEIOC_ENABLE (('D'<<8) + 'E')
! 219: #define PARSEIOC_DISABLE (('D'<<8) + 'D')
! 220: #define PARSEIOC_SETFMT (('D'<<8) + 'f')
! 221: #define PARSEIOC_GETFMT (('D'<<8) + 'F')
! 222: #define PARSEIOC_SETCS (('D'<<8) + 'C')
! 223: #define PARSEIOC_TIMECODE (('D'<<8) + 'T')
! 224:
! 225: #endif
! 226:
! 227: /*------ IO handling flags (sorry) ------*/
! 228:
! 229: #define PARSE_IO_CSIZE 0x00000003
! 230: #define PARSE_IO_CS5 0x00000000
! 231: #define PARSE_IO_CS6 0x00000001
! 232: #define PARSE_IO_CS7 0x00000002
! 233: #define PARSE_IO_CS8 0x00000003
! 234:
! 235: /*
! 236: * ioctl structure
! 237: */
! 238: union parsectl
! 239: {
! 240: struct parsegettc
! 241: {
! 242: u_long parse_state; /* last state */
! 243: u_long parse_badformat; /* number of bad packets since last query */
! 244: unsigned short parse_format;/* last decoded format */
! 245: unsigned short parse_count; /* count of valid time code bytes */
! 246: char parse_buffer[PARSE_TCMAX+1]; /* timecode buffer */
! 247: } parsegettc;
! 248:
! 249: struct parseformat
! 250: {
! 251: unsigned short parse_format;/* number of examined format */
! 252: unsigned short parse_count; /* count of valid string bytes */
! 253: char parse_buffer[PARSE_TCMAX+1]; /* format code string */
! 254: } parseformat;
! 255:
! 256: struct parsesetcs
! 257: {
! 258: u_long parse_cs; /* character size (needed for stripping) */
! 259: } parsesetcs;
! 260: };
! 261:
! 262: typedef union parsectl parsectl_t;
! 263:
! 264: /*------ for conversion routines --------*/
! 265:
! 266: struct parse /* parse module local data */
! 267: {
! 268: int parse_flags; /* operation and current status flags */
! 269:
! 270: int parse_ioflags; /* io handling flags (5-8 Bit control currently) */
! 271:
! 272: /*
! 273: * private data - fixed format only
! 274: */
! 275: unsigned short parse_plen; /* length of private data */
! 276: void *parse_pdata; /* private data pointer */
! 277:
! 278: /*
! 279: * time code input buffer (from RS232 or PPS)
! 280: */
! 281: unsigned short parse_index; /* current buffer index */
! 282: char *parse_data; /* data buffer */
! 283: unsigned short parse_dsize; /* size of data buffer */
! 284: unsigned short parse_lformat; /* last format used */
! 285: u_long parse_lstate; /* last state code */
! 286: char *parse_ldata; /* last data buffer */
! 287: unsigned short parse_ldsize; /* last data buffer length */
! 288: u_long parse_badformat; /* number of unparsable pakets */
! 289:
! 290: timestamp_t parse_lastchar; /* last time a character was received */
! 291: parsetime_t parse_dtime; /* external data prototype */
! 292: };
! 293:
! 294: typedef struct parse parse_t;
! 295:
! 296: struct clocktime /* clock time broken up from time code */
! 297: {
! 298: long day;
! 299: long month;
! 300: long year;
! 301: long hour;
! 302: long minute;
! 303: long second;
! 304: long usecond;
! 305: long utcoffset; /* in seconds */
! 306: time_t utctime; /* the actual time - alternative to date/time */
! 307: u_long flags; /* current clock status */
! 308: };
! 309:
! 310: typedef struct clocktime clocktime_t;
! 311:
! 312: /*
! 313: * parser related return/error codes
! 314: */
! 315: #define CVT_MASK (unsigned)0x0000000F /* conversion exit code */
! 316: #define CVT_NONE (unsigned)0x00000001 /* format not applicable */
! 317: #define CVT_FAIL (unsigned)0x00000002 /* conversion failed - error code returned */
! 318: #define CVT_OK (unsigned)0x00000004 /* conversion succeeded */
! 319: #define CVT_SKIP (unsigned)0x00000008 /* conversion succeeded */
! 320: #define CVT_ADDITIONAL (unsigned)0x00000010 /* additional data is available */
! 321: #define CVT_BADFMT (unsigned)0x00000100 /* general format error - (unparsable) */
! 322: #define CVT_BADDATE (unsigned)0x00000200 /* date field incorrect */
! 323: #define CVT_BADTIME (unsigned)0x00000400 /* time field incorrect */
! 324:
! 325: /*
! 326: * return codes used by special input parsers
! 327: */
! 328: #define PARSE_INP_SKIP 0x00 /* discard data - may have been consumed */
! 329: #define PARSE_INP_TIME 0x01 /* time code assembled */
! 330: #define PARSE_INP_PARSE 0x02 /* parse data using normal algorithm */
! 331: #define PARSE_INP_DATA 0x04 /* additional data to pass up */
! 332: #define PARSE_INP_SYNTH 0x08 /* just pass up synthesized time */
! 333:
! 334: /*
! 335: * PPS edge info
! 336: */
! 337: #define SYNC_ZERO 0x00
! 338: #define SYNC_ONE 0x01
! 339:
! 340: struct clockformat
! 341: {
! 342: /* special input protocol - implies fixed format */
! 343: u_long (*input) (parse_t *, unsigned int, timestamp_t *);
! 344: /* conversion routine */
! 345: u_long (*convert) (unsigned char *, int, struct format *, clocktime_t *, void *);
! 346: /* routine for handling RS232 sync events (time stamps) */
! 347: /* PPS input routine */
! 348: u_long (*syncpps) (parse_t *, int, timestamp_t *);
! 349: /* time code synthesizer */
! 350:
! 351: void *data; /* local parameters */
! 352: const char *name; /* clock format name */
! 353: unsigned short length; /* maximum length of data packet */
! 354: unsigned short plen; /* length of private data - implies fixed format */
! 355: };
! 356:
! 357: typedef struct clockformat clockformat_t;
! 358:
! 359: /*
! 360: * parse interface
! 361: */
! 362: extern int parse_ioinit (parse_t *);
! 363: extern void parse_ioend (parse_t *);
! 364: extern int parse_ioread (parse_t *, unsigned int, timestamp_t *);
! 365: extern int parse_iopps (parse_t *, int, timestamp_t *);
! 366: extern void parse_iodone (parse_t *);
! 367: extern int parse_timecode (parsectl_t *, parse_t *);
! 368: extern int parse_getfmt (parsectl_t *, parse_t *);
! 369: extern int parse_setfmt (parsectl_t *, parse_t *);
! 370: extern int parse_setcs (parsectl_t *, parse_t *);
! 371:
! 372: extern unsigned int parse_restart (parse_t *, unsigned int);
! 373: extern unsigned int parse_addchar (parse_t *, unsigned int);
! 374: extern unsigned int parse_end (parse_t *);
! 375:
! 376: extern int Strok (const unsigned char *, const unsigned char *);
! 377: extern int Stoi (const unsigned char *, long *, int);
! 378:
! 379: extern time_t parse_to_unixtime (clocktime_t *, u_long *);
! 380: extern u_long updatetimeinfo (parse_t *, u_long);
! 381: extern void syn_simple (parse_t *, timestamp_t *, struct format *, u_long);
! 382: extern u_long pps_simple (parse_t *, int, timestamp_t *);
! 383: extern u_long pps_one (parse_t *, int, timestamp_t *);
! 384: extern u_long pps_zero (parse_t *, int, timestamp_t *);
! 385: extern int parse_timedout (parse_t *, timestamp_t *, struct timeval *);
! 386:
! 387: #endif
! 388:
! 389: /*
! 390: * History:
! 391: *
! 392: * parse.h,v
! 393: * Revision 4.12 2007/01/14 08:36:03 kardel
! 394: * make timestamp union anonymous to avoid conflicts with
! 395: * some OSes that choose to create a nameing conflic here.
! 396: *
! 397: * Revision 4.11 2005/06/25 10:58:45 kardel
! 398: * add missing log keywords
! 399: *
! 400: * Revision 4.5 1998/08/09 22:23:32 kardel
! 401: * 4.0.73e2 adjustments
! 402: *
! 403: * Revision 4.4 1998/06/14 21:09:27 kardel
! 404: * Sun acc cleanup
! 405: *
! 406: * Revision 4.3 1998/06/13 11:49:25 kardel
! 407: * STREAM macro gone in favor of HAVE_SYS_STREAM_H
! 408: *
! 409: * Revision 4.2 1998/06/12 15:14:25 kardel
! 410: * fixed prototypes
! 411: *
! 412: * Revision 4.1 1998/05/24 10:07:59 kardel
! 413: * removed old data structure cruft (new input model)
! 414: * new PARSE_INP* macros for input handling
! 415: * removed old SYNC_* macros from old input model
! 416: * (struct clockformat): removed old parse functions in favor of the
! 417: * new input model
! 418: * updated prototypes
! 419: *
! 420: * form V3 3.31 - log info deleted 1998/04/11 kardel
! 421: */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>