1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17: VPATH = @srcdir@
18: pkgdatadir = $(datadir)/@PACKAGE@
19: pkgincludedir = $(includedir)/@PACKAGE@
20: pkglibdir = $(libdir)/@PACKAGE@
21: pkglibexecdir = $(libexecdir)/@PACKAGE@
22: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23: install_sh_DATA = $(install_sh) -c -m 644
24: install_sh_PROGRAM = $(install_sh) -c
25: install_sh_SCRIPT = $(install_sh) -c
26: INSTALL_HEADER = $(INSTALL_DATA)
27: transform = $(program_transform_name)
28: NORMAL_INSTALL = :
29: PRE_INSTALL = :
30: POST_INSTALL = :
31: NORMAL_UNINSTALL = :
32: PRE_UNINSTALL = :
33: POST_UNINSTALL = :
34: build_triplet = @build@
35: host_triplet = @host@
36: subdir = kernel
37: DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
38: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39: am__aclocal_m4_deps = $(top_srcdir)/sntp/libopts/m4/libopts.m4 \
40: $(top_srcdir)/m4/define_dir.m4 $(top_srcdir)/m4/libtool.m4 \
41: $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
42: $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
43: $(top_srcdir)/m4/ntp_cacheversion.m4 \
44: $(top_srcdir)/m4/ntp_dir_sep.m4 \
45: $(top_srcdir)/m4/ntp_lineeditlibs.m4 \
46: $(top_srcdir)/m4/ntp_openssl.m4 \
47: $(top_srcdir)/m4/ntp_vpathhack.m4 \
48: $(top_srcdir)/m4/os_cflags.m4 $(top_srcdir)/version.m4 \
49: $(top_srcdir)/configure.ac
50: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
51: $(ACLOCAL_M4)
52: mkinstalldirs = $(install_sh) -d
53: CONFIG_HEADER = $(top_builddir)/config.h
54: CONFIG_CLEAN_FILES =
55: CONFIG_CLEAN_VPATH_FILES =
56: SOURCES =
57: DIST_SOURCES =
58: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
59: html-recursive info-recursive install-data-recursive \
60: install-dvi-recursive install-exec-recursive \
61: install-html-recursive install-info-recursive \
62: install-pdf-recursive install-ps-recursive install-recursive \
63: installcheck-recursive installdirs-recursive pdf-recursive \
64: ps-recursive uninstall-recursive
65: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
66: distclean-recursive maintainer-clean-recursive
67: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
68: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
69: distdir
70: ETAGS = etags
71: CTAGS = ctags
72: DIST_SUBDIRS = $(SUBDIRS)
73: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
74: am__relativize = \
75: dir0=`pwd`; \
76: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
77: sed_rest='s,^[^/]*/*,,'; \
78: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
79: sed_butlast='s,/*[^/]*$$,,'; \
80: while test -n "$$dir1"; do \
81: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
82: if test "$$first" != "."; then \
83: if test "$$first" = ".."; then \
84: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
85: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
86: else \
87: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
88: if test "$$first2" = "$$first"; then \
89: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
90: else \
91: dir2="../$$dir2"; \
92: fi; \
93: dir0="$$dir0"/"$$first"; \
94: fi; \
95: fi; \
96: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
97: done; \
98: reldir="$$dir2"
99: ACLOCAL = @ACLOCAL@
100: AMTAR = @AMTAR@
101: AR = @AR@
102: AUTOCONF = @AUTOCONF@
103: AUTOHEADER = @AUTOHEADER@
104: AUTOMAKE = @AUTOMAKE@
105: AWK = @AWK@
106: BINSUBDIR = @BINSUBDIR@
107: CC = @CC@
108: CCDEPMODE = @CCDEPMODE@
109: CFLAGS = @CFLAGS@
110: CHUTEST = @CHUTEST@
111: CLKTEST = @CLKTEST@
112: CPP = @CPP@
113: CPPFLAGS = @CPPFLAGS@
114: CYGPATH_W = @CYGPATH_W@
115: DCFD = @DCFD@
116: DEFS = @DEFS@
117: DEPDIR = @DEPDIR@
118: DLLTOOL = @DLLTOOL@
119: DSYMUTIL = @DSYMUTIL@
120: DUMPBIN = @DUMPBIN@
121: ECHO_C = @ECHO_C@
122: ECHO_N = @ECHO_N@
123: ECHO_T = @ECHO_T@
124: EDITLINE_LIBS = @EDITLINE_LIBS@
125: EF_LIBS = @EF_LIBS@
126: EF_PROGS = @EF_PROGS@
127: EGREP = @EGREP@
128: EXEEXT = @EXEEXT@
129: FGREP = @FGREP@
130: GREP = @GREP@
131: HAVE_INLINE = @HAVE_INLINE@
132: INSTALL = @INSTALL@
133: INSTALL_DATA = @INSTALL_DATA@
134: INSTALL_PROGRAM = @INSTALL_PROGRAM@
135: INSTALL_SCRIPT = @INSTALL_SCRIPT@
136: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
137: LCRYPTO = @LCRYPTO@
138: LD = @LD@
139: LDFLAGS = @LDFLAGS@
140: LIBOBJS = @LIBOBJS@
141: LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
142: LIBOPTS_DIR = @LIBOPTS_DIR@
143: LIBOPTS_LDADD = @LIBOPTS_LDADD@
144: LIBPARSE = @LIBPARSE@
145: LIBS = @LIBS@
146: LIBTOOL = @LIBTOOL@
147: LIPO = @LIPO@
148: LN_S = @LN_S@
149: LSCF = @LSCF@
150: LTLIBOBJS = @LTLIBOBJS@
151: MAKEINFO = @MAKEINFO@
152: MAKE_ADJTIMED = @MAKE_ADJTIMED@
153: MAKE_CHECK_LAYOUT = @MAKE_CHECK_LAYOUT@
154: MAKE_CHECK_Y2K = @MAKE_CHECK_Y2K@
155: MAKE_LIBNTPSIM = @MAKE_LIBNTPSIM@
156: MAKE_LIBPARSE = @MAKE_LIBPARSE@
157: MAKE_LIBPARSE_KERNEL = @MAKE_LIBPARSE_KERNEL@
158: MAKE_NTPDSIM = @MAKE_NTPDSIM@
159: MAKE_NTPSNMPD = @MAKE_NTPSNMPD@
160: MAKE_NTPTIME = @MAKE_NTPTIME@
161: MAKE_PARSEKMODULE = @MAKE_PARSEKMODULE@
162: MAKE_TICKADJ = @MAKE_TICKADJ@
163: MAKE_TIMETRIM = @MAKE_TIMETRIM@
164: MANIFEST_TOOL = @MANIFEST_TOOL@
165: MKDIR_P = @MKDIR_P@
166: NM = @NM@
167: NMEDIT = @NMEDIT@
168: OBJDUMP = @OBJDUMP@
169: OBJEXT = @OBJEXT@
170: OPENSSL = @OPENSSL@
171: OPENSSL_INC = @OPENSSL_INC@
172: OPENSSL_LIB = @OPENSSL_LIB@
173: OTOOL = @OTOOL@
174: OTOOL64 = @OTOOL64@
175: PACKAGE = @PACKAGE@
176: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
177: PACKAGE_NAME = @PACKAGE_NAME@
178: PACKAGE_STRING = @PACKAGE_STRING@
179: PACKAGE_TARNAME = @PACKAGE_TARNAME@
180: PACKAGE_URL = @PACKAGE_URL@
181: PACKAGE_VERSION = @PACKAGE_VERSION@
182: PATH_NET_SNMP_CONFIG = @PATH_NET_SNMP_CONFIG@
183: PATH_PERL = @PATH_PERL@
184: PATH_SEPARATOR = @PATH_SEPARATOR@
185: PATH_SH = @PATH_SH@
186: PATH_TEST = @PATH_TEST@
187: POSIX_SHELL = @POSIX_SHELL@
188: PROPDELAY = @PROPDELAY@
189: RANLIB = @RANLIB@
190: SED = @SED@
191: SET_MAKE = @SET_MAKE@
192: SHELL = @SHELL@
193: SNMP_CFLAGS = @SNMP_CFLAGS@
194: SNMP_CPPFLAGS = @SNMP_CPPFLAGS@
195: SNMP_LIBS = @SNMP_LIBS@
196: STRIP = @STRIP@
197: TESTDCF = @TESTDCF@
198: VERSION = @VERSION@
199: YACC = @YACC@
200: YFLAGS = @YFLAGS@
201: abs_builddir = @abs_builddir@
202: abs_srcdir = @abs_srcdir@
203: abs_top_builddir = @abs_top_builddir@
204: abs_top_srcdir = @abs_top_srcdir@
205: ac_ct_AR = @ac_ct_AR@
206: ac_ct_CC = @ac_ct_CC@
207: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
208: am__include = @am__include@
209: am__leading_dot = @am__leading_dot@
210: am__quote = @am__quote@
211: am__tar = @am__tar@
212: am__untar = @am__untar@
213: bindir = @bindir@
214: build = @build@
215: build_alias = @build_alias@
216: build_cpu = @build_cpu@
217: build_os = @build_os@
218: build_vendor = @build_vendor@
219: builddir = @builddir@
220: datadir = @datadir@
221: datarootdir = @datarootdir@
222: docdir = @docdir@
223: dvidir = @dvidir@
224: exec_prefix = @exec_prefix@
225: host = @host@
226: host_alias = @host_alias@
227: host_cpu = @host_cpu@
228: host_os = @host_os@
229: host_vendor = @host_vendor@
230: htmldir = @htmldir@
231: includedir = @includedir@
232: infodir = @infodir@
233: install_sh = @install_sh@
234: libdir = @libdir@
235: libexecdir = @libexecdir@
236: localedir = @localedir@
237: localstatedir = @localstatedir@
238: mandir = @mandir@
239: mkdir_p = @mkdir_p@
240: oldincludedir = @oldincludedir@
241: pdfdir = @pdfdir@
242: prefix = @prefix@
243: program_transform_name = @program_transform_name@
244: psdir = @psdir@
245: sbindir = @sbindir@
246: sharedstatedir = @sharedstatedir@
247: srcdir = @srcdir@
248: subdirs = @subdirs@
249: sysconfdir = @sysconfdir@
250: target_alias = @target_alias@
251: top_build_prefix = @top_build_prefix@
252: top_builddir = @top_builddir@
253: top_srcdir = @top_srcdir@
254:
255: #AUTOMAKE_OPTIONS = ../util/ansi2knr no-dependencies
256: AUTOMAKE_OPTIONS =
257: SUBDIRS = sys
258: ETAGS_ARGS = Makefile.am
259: EXTRA_DIST = chuinit.c clkinit.c tty_chu.c tty_chu_STREAMS.c tty_clk.c tty_clk_STREAMS.c
260: all: all-recursive
261:
262: .SUFFIXES:
263: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
264: @for dep in $?; do \
265: case '$(am__configure_deps)' in \
266: *$$dep*) \
267: ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
268: && { if test -f $@; then exit 0; else break; fi; }; \
269: exit 1;; \
270: esac; \
271: done; \
272: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign kernel/Makefile'; \
273: $(am__cd) $(top_srcdir) && \
274: $(AUTOMAKE) --foreign kernel/Makefile
275: .PRECIOUS: Makefile
276: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
277: @case '$?' in \
278: *config.status*) \
279: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
280: *) \
281: echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
282: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
283: esac;
284:
285: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
286: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
287:
288: $(top_srcdir)/configure: $(am__configure_deps)
289: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
290: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
291: cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
292: $(am__aclocal_m4_deps):
293:
294: mostlyclean-libtool:
295: -rm -f *.lo
296:
297: clean-libtool:
298: -rm -rf .libs _libs
299:
300: # This directory's subdirectories are mostly independent; you can cd
301: # into them and run `make' without going through this Makefile.
302: # To change the values of `make' variables: instead of editing Makefiles,
303: # (1) if the variable is set in `config.status', edit `config.status'
304: # (which will cause the Makefiles to be regenerated when you run `make');
305: # (2) otherwise, pass the desired values on the `make' command line.
306: $(RECURSIVE_TARGETS):
307: @fail= failcom='exit 1'; \
308: for f in x $$MAKEFLAGS; do \
309: case $$f in \
310: *=* | --[!k]*);; \
311: *k*) failcom='fail=yes';; \
312: esac; \
313: done; \
314: dot_seen=no; \
315: target=`echo $@ | sed s/-recursive//`; \
316: list='$(SUBDIRS)'; for subdir in $$list; do \
317: echo "Making $$target in $$subdir"; \
318: if test "$$subdir" = "."; then \
319: dot_seen=yes; \
320: local_target="$$target-am"; \
321: else \
322: local_target="$$target"; \
323: fi; \
324: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
325: || eval $$failcom; \
326: done; \
327: if test "$$dot_seen" = "no"; then \
328: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
329: fi; test -z "$$fail"
330:
331: $(RECURSIVE_CLEAN_TARGETS):
332: @fail= failcom='exit 1'; \
333: for f in x $$MAKEFLAGS; do \
334: case $$f in \
335: *=* | --[!k]*);; \
336: *k*) failcom='fail=yes';; \
337: esac; \
338: done; \
339: dot_seen=no; \
340: case "$@" in \
341: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
342: *) list='$(SUBDIRS)' ;; \
343: esac; \
344: rev=''; for subdir in $$list; do \
345: if test "$$subdir" = "."; then :; else \
346: rev="$$subdir $$rev"; \
347: fi; \
348: done; \
349: rev="$$rev ."; \
350: target=`echo $@ | sed s/-recursive//`; \
351: for subdir in $$rev; do \
352: echo "Making $$target in $$subdir"; \
353: if test "$$subdir" = "."; then \
354: local_target="$$target-am"; \
355: else \
356: local_target="$$target"; \
357: fi; \
358: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
359: || eval $$failcom; \
360: done && test -z "$$fail"
361: tags-recursive:
362: list='$(SUBDIRS)'; for subdir in $$list; do \
363: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
364: done
365: ctags-recursive:
366: list='$(SUBDIRS)'; for subdir in $$list; do \
367: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
368: done
369:
370: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
371: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
372: unique=`for i in $$list; do \
373: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
374: done | \
375: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
376: END { if (nonempty) { for (i in files) print i; }; }'`; \
377: mkid -fID $$unique
378: tags: TAGS
379:
380: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
381: $(TAGS_FILES) $(LISP)
382: set x; \
383: here=`pwd`; \
384: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
385: include_option=--etags-include; \
386: empty_fix=.; \
387: else \
388: include_option=--include; \
389: empty_fix=; \
390: fi; \
391: list='$(SUBDIRS)'; for subdir in $$list; do \
392: if test "$$subdir" = .; then :; else \
393: test ! -f $$subdir/TAGS || \
394: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
395: fi; \
396: done; \
397: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
398: unique=`for i in $$list; do \
399: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
400: done | \
401: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
402: END { if (nonempty) { for (i in files) print i; }; }'`; \
403: shift; \
404: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
405: test -n "$$unique" || unique=$$empty_fix; \
406: if test $$# -gt 0; then \
407: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
408: "$$@" $$unique; \
409: else \
410: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
411: $$unique; \
412: fi; \
413: fi
414: ctags: CTAGS
415: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
416: $(TAGS_FILES) $(LISP)
417: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
418: unique=`for i in $$list; do \
419: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
420: done | \
421: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
422: END { if (nonempty) { for (i in files) print i; }; }'`; \
423: test -z "$(CTAGS_ARGS)$$unique" \
424: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
425: $$unique
426:
427: GTAGS:
428: here=`$(am__cd) $(top_builddir) && pwd` \
429: && $(am__cd) $(top_srcdir) \
430: && gtags -i $(GTAGS_ARGS) "$$here"
431:
432: distclean-tags:
433: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
434:
435: distdir: $(DISTFILES)
436: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
437: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
438: list='$(DISTFILES)'; \
439: dist_files=`for file in $$list; do echo $$file; done | \
440: sed -e "s|^$$srcdirstrip/||;t" \
441: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
442: case $$dist_files in \
443: */*) $(MKDIR_P) `echo "$$dist_files" | \
444: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
445: sort -u` ;; \
446: esac; \
447: for file in $$dist_files; do \
448: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
449: if test -d $$d/$$file; then \
450: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
451: if test -d "$(distdir)/$$file"; then \
452: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
453: fi; \
454: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
455: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
456: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
457: fi; \
458: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
459: else \
460: test -f "$(distdir)/$$file" \
461: || cp -p $$d/$$file "$(distdir)/$$file" \
462: || exit 1; \
463: fi; \
464: done
465: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
466: if test "$$subdir" = .; then :; else \
467: test -d "$(distdir)/$$subdir" \
468: || $(MKDIR_P) "$(distdir)/$$subdir" \
469: || exit 1; \
470: fi; \
471: done
472: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
473: if test "$$subdir" = .; then :; else \
474: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
475: $(am__relativize); \
476: new_distdir=$$reldir; \
477: dir1=$$subdir; dir2="$(top_distdir)"; \
478: $(am__relativize); \
479: new_top_distdir=$$reldir; \
480: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
481: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
482: ($(am__cd) $$subdir && \
483: $(MAKE) $(AM_MAKEFLAGS) \
484: top_distdir="$$new_top_distdir" \
485: distdir="$$new_distdir" \
486: am__remove_distdir=: \
487: am__skip_length_check=: \
488: am__skip_mode_fix=: \
489: distdir) \
490: || exit 1; \
491: fi; \
492: done
493: check-am: all-am
494: check: check-recursive
495: all-am: Makefile
496: installdirs: installdirs-recursive
497: installdirs-am:
498: install: install-recursive
499: install-exec: install-exec-recursive
500: install-data: install-data-recursive
501: uninstall: uninstall-recursive
502:
503: install-am: all-am
504: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
505:
506: installcheck: installcheck-recursive
507: install-strip:
508: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
509: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
510: `test -z '$(STRIP)' || \
511: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
512: mostlyclean-generic:
513:
514: clean-generic:
515:
516: distclean-generic:
517: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
518: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
519:
520: maintainer-clean-generic:
521: @echo "This command is intended for maintainers to use"
522: @echo "it deletes files that may require special tools to rebuild."
523: clean: clean-recursive
524:
525: clean-am: clean-generic clean-libtool mostlyclean-am
526:
527: distclean: distclean-recursive
528: -rm -f Makefile
529: distclean-am: clean-am distclean-generic distclean-tags
530:
531: dvi: dvi-recursive
532:
533: dvi-am:
534:
535: html: html-recursive
536:
537: html-am:
538:
539: info: info-recursive
540:
541: info-am:
542:
543: install-data-am:
544:
545: install-dvi: install-dvi-recursive
546:
547: install-dvi-am:
548:
549: install-exec-am:
550:
551: install-html: install-html-recursive
552:
553: install-html-am:
554:
555: install-info: install-info-recursive
556:
557: install-info-am:
558:
559: install-man:
560:
561: install-pdf: install-pdf-recursive
562:
563: install-pdf-am:
564:
565: install-ps: install-ps-recursive
566:
567: install-ps-am:
568:
569: installcheck-am:
570:
571: maintainer-clean: maintainer-clean-recursive
572: -rm -f Makefile
573: maintainer-clean-am: distclean-am maintainer-clean-generic
574:
575: mostlyclean: mostlyclean-recursive
576:
577: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
578:
579: pdf: pdf-recursive
580:
581: pdf-am:
582:
583: ps: ps-recursive
584:
585: ps-am:
586:
587: uninstall-am:
588:
589: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
590: install-am install-strip tags-recursive
591:
592: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
593: all all-am check check-am clean clean-generic clean-libtool \
594: ctags ctags-recursive distclean distclean-generic \
595: distclean-libtool distclean-tags distdir dvi dvi-am html \
596: html-am info info-am install install-am install-data \
597: install-data-am install-dvi install-dvi-am install-exec \
598: install-exec-am install-html install-html-am install-info \
599: install-info-am install-man install-pdf install-pdf-am \
600: install-ps install-ps-am install-strip installcheck \
601: installcheck-am installdirs installdirs-am maintainer-clean \
602: maintainer-clean-generic mostlyclean mostlyclean-generic \
603: mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
604: uninstall uninstall-am
605:
606:
607: # Tell versions [3.59,3.63) of GNU make to not export all variables.
608: # Otherwise a system limit (for SysV at least) may be exceeded.
609: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / kernel