/*
* refclock_acts - clock driver for the NIST/USNO/PTB/NPL Computer Time
* Services
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#if defined(REFCLOCK) && (defined(CLOCK_ACTS) || defined(CLOCK_PTBACTS))
#include "ntpd.h"
#include "ntp_io.h"
#include "ntp_unixtime.h"
#include "ntp_refclock.h"
#include "ntp_stdlib.h"
#include "ntp_control.h"
#include <stdio.h>
#include <ctype.h>
#ifdef HAVE_SYS_IOCTL_H
# include <sys/ioctl.h>
#endif /* HAVE_SYS_IOCTL_H */
/*
* This driver supports the US (NIST, USNO) and European (PTB, NPL,
* etc.) modem time services, as well as Spectracom GPS and WWVB
* receivers connected via a modem. The driver periodically dials a
* number from a telephone list, receives the timecode data and
* calculates the local clock correction. It is designed primarily for
* use as backup when neither a radio clock nor connectivity to Internet
* time servers is available.
*
* This driver requires a modem with a Hayes-compatible command set and
* control over the modem data terminal ready (DTR) control line. The
* modem setup string is hard-coded in the driver and may require
* changes for nonstandard modems or special circumstances. For reasons
* unrelated to this driver, the data set ready (DSR) control line
* should not be set when this driver is first started.
*
* The calling program is initiated by setting fudge flag1, either
* manually or automatically. When flag1 is set, the calling program
* dials the first number in the phone command of the configuration
* file. If that call fails, the calling program dials the second number
* and so on. The number is specified by the Hayes ATDT prefix followed
* by the number itself, including the prefix and long-distance digits
* and delay code, if necessary. The flag1 is reset and the calling
* program terminated if (a) a valid clock update has been determined,
* (b) no more numbers remain in the list, (c) a device fault or timeout
* occurs or (d) fudge flag1 is reset manually.
*
* The driver is transparent to each of the modem time services and
* Spectracom radios. It selects the parsing algorithm depending on the
* message length. There is some hazard should the message be corrupted.
* However, the data format is checked carefully and only if all checks
* succeed is the message accepted. Corrupted lines are discarded
* without complaint.
*
* Fudge controls
*
* flag1 force a call in manual mode
* flag2 enable port locking (not verified)
* flag3 no modem; port is directly connected to device
* flag4 not used
*
* time1 offset adjustment (s)
*
* Ordinarily, the serial port is connected to a modem; however, it can
* be connected directly to a device or another computer for testing and
* calibration. In this case set fudge flag3 and the driver will send a
* single character 'T' at each poll event. In principle, fudge flag2
* enables port locking, allowing the modem to be shared when not in use
* by this driver. At least on Solaris with the current NTP I/O
* routines, this results only in lots of ugly error messages.
*/
/*
* National Institute of Science and Technology (NIST)
*
* Phone: (303) 494-4774 (Boulder, CO); (808) 335-4721 (Hawaii)
*
* Data Format
*
* National Institute of Standards and Technology
* Telephone Time Service, Generator 3B
* Enter question mark "?" for HELP
* D L D
* MJD YR MO DA H M S ST S UT1 msADV <OTM>
* 47999 90-04-18 21:39:15 50 0 +.1 045.0 UTC(NIST) *<CR><LF>
* ...
*
* MJD, DST, DUT1 and UTC are not used by this driver. The "*" or "#" is
* the on-time markers echoed by the driver and used by NIST to measure
* and correct for the propagation delay.
*
* US Naval Observatory (USNO)
*
* Phone: (202) 762-1594 (Washington, DC); (719) 567-6742 (Boulder, CO)
*
* Data Format (two lines, repeating at one-second intervals)
*
* jjjjj nnn hhmmss UTC<CR><LF>
* *<CR><LF>
*
* jjjjj modified Julian day number (not used)
* nnn day of year
* hhmmss second of day
* * on-time marker for previous timecode
* ...
*
* USNO does not correct for the propagation delay. A fudge time1 of
* about .06 s is advisable.
*
* European Services (PTB, NPL, etc.)
*
* PTB: +49 531 512038 (Germany)
* NPL: 0906 851 6333 (UK only)
*
* Data format (see the documentation for phone numbers and formats.)
*
* 1995-01-23 20:58:51 MEZ 10402303260219950123195849740+40000500<CR><LF>
*
* Spectracom GPS and WWVB Receivers
*
* If a modem is connected to a Spectracom receiver, this driver will
* call it up and retrieve the time in one of two formats. As this
* driver does not send anything, the radio will have to either be
* configured in continuous mode or be polled by another local driver.
*/
/*
* Interface definitions
*/
#define DEVICE "/dev/acts%d" /* device name and unit */
#define SPEED232 B9600 /* uart speed (9600 baud) */
#define PRECISION (-10) /* precision assumed (about 1 ms) */
#define LOCKFILE "/var/spool/locks/LCK..cua%d"
#define DESCRIPTION "Automated Computer Time Service" /* WRU */
#define REFID "NONE" /* default reference ID */
#define MSGCNT 20 /* max message count */
#define SMAX 256 /* max clockstats line length */
#define MAXPHONE 10 /* max number of phone numbers */
/*
* Calling program modes
*/
#define MODE_AUTO 0 /* automatic mode */
#define MODE_BACKUP 1 /* backup mode */
#define MODE_MANUAL 2 /* manual mode */
/*
* Service identifiers.
*/
#define REFACTS "NIST" /* NIST reference ID */
#define LENACTS 50 /* NIST format */
#define REFUSNO "USNO" /* USNO reference ID */
#define LENUSNO 20 /* USNO */
#define REFPTB "PTB\0" /* PTB/NPL reference ID */
#define LENPTB 78 /* PTB/NPL format */
#define REFWWVB "WWVB" /* WWVB reference ID */
#define LENWWVB0 22 /* WWVB format 0 */
#define LENWWVB2 24 /* WWVB format 2 */
#define LF 0x0a /* ASCII LF */
/*
* Modem setup strings. These may have to be changed for some modems.
*
* AT command prefix
* B1 US answer tone
* &C0 disable carrier detect
* &D2 hang up and return to command mode on DTR transition
* E0 modem command echo disabled
* l1 set modem speaker volume to low level
* M1 speaker enabled until carrier detect
* Q0 return result codes
* V1 return result codes as English words
*/
#define MODEM_SETUP "ATB1&C0&D2E0L1M1Q0V1\r" /* modem setup */
#define MODEM_HANGUP "ATH\r" /* modem disconnect */
/*
* Timeouts (all in seconds)
*/
#define SETUP 3 /* setup timeout */
#define DTR 1 /* DTR timeout */
#define ANSWER 60 /* answer timeout */
#define CONNECT 20 /* first valid message timeout */
#define TIMECODE 30 /* all valid messages timeout */
/*
* State machine codes
*/
#define S_IDLE 0 /* wait for poll */
#define S_OK 1 /* wait for modem setup */
#define S_DTR 2 /* wait for modem DTR */
#define S_CONNECT 3 /* wait for answer*/
#define S_FIRST 4 /* wait for first valid message */
#define S_MSG 5 /* wait for all messages */
#define S_CLOSE 6 /* wait after sending disconnect */
/*
* Unit control structure
*/
struct actsunit {
int unit; /* unit number */
int state; /* the first one was Delaware */
int timer; /* timeout counter */
int retry; /* retry index */
int msgcnt; /* count of messages received */
l_fp tstamp; /* on-time timestamp */
char *bufptr; /* buffer pointer */
};
/*
* Function prototypes
*/
static int acts_start (int, struct peer *);
static void acts_shutdown (int, struct peer *);
static void acts_receive (struct recvbuf *);
static void acts_message (struct peer *);
static void acts_timecode (struct peer *, char *);
static void acts_poll (int, struct peer *);
static void acts_timeout (struct peer *);
static void acts_disc (struct peer *);
static void acts_timer (int, struct peer *);
/*
* Transfer vector (conditional structure name)
*/
struct refclock refclock_acts = {
acts_start, /* start up driver */
acts_shutdown, /* shut down driver */
acts_poll, /* transmit poll message */
noentry, /* not used */
noentry, /* not used */
noentry, /* not used */
acts_timer /* housekeeping timer */
};
/*
* Initialize data for processing
*/
static int
acts_start (
int unit,
struct peer *peer
)
{
struct actsunit *up;
struct refclockproc *pp;
/*
* Allocate and initialize unit structure
*/
up = emalloc(sizeof(struct actsunit));
memset(up, 0, sizeof(struct actsunit));
up->unit = unit;
pp = peer->procptr;
pp->unitptr = (caddr_t)up;
pp->io.clock_recv = acts_receive;
pp->io.srcclock = (caddr_t)peer;
pp->io.datalen = 0;
/*
* Initialize miscellaneous variables
*/
peer->precision = PRECISION;
pp->clockdesc = DESCRIPTION;
memcpy((char *)&pp->refid, REFID, 4);
peer->sstclktype = CTL_SST_TS_TELEPHONE;
up->bufptr = pp->a_lastcode;
return (1);
}
/*
* acts_shutdown - shut down the clock
*/
static void
acts_shutdown (
int unit,
struct peer *peer
)
{
struct actsunit *up;
struct refclockproc *pp;
/*
* Warning: do this only when a call is not in progress.
*/
pp = peer->procptr;
up = (struct actsunit *)pp->unitptr;
free(up);
}
/*
* acts_receive - receive data from the serial interface
*/
static void
acts_receive (
struct recvbuf *rbufp
)
{
struct actsunit *up;
struct refclockproc *pp;
struct peer *peer;
char tbuf[BMAX];
char *tptr;
/*
* Initialize pointers and read the timecode and timestamp. Note
* we are in raw mode and victim of whatever the terminal
* interface kicks up; so, we have to reassemble messages from
* arbitrary fragments. Capture the timecode at the beginning of
* the message and at the '*' and '#' on-time characters.
*/
peer = (struct peer *)rbufp->recv_srcclock;
pp = peer->procptr;
up = (struct actsunit *)pp->unitptr;
pp->lencode = refclock_gtraw(rbufp, tbuf, BMAX - (up->bufptr -
pp->a_lastcode), &pp->lastrec);
for (tptr = tbuf; *tptr != '\0'; tptr++) {
if (*tptr == LF) {
if (up->bufptr == pp->a_lastcode) {
up->tstamp = pp->lastrec;
continue;
} else {
*up->bufptr = '\0';
acts_message(peer);
up->bufptr = pp->a_lastcode;
}
} else if (!iscntrl(*tptr)) {
*up->bufptr++ = *tptr;
if (*tptr == '*' || *tptr == '#') {
up->tstamp = pp->lastrec;
write(pp->io.fd, tptr, 1);
}
}
}
}
/*
* acts_message - process message
*/
void
acts_message(
struct peer *peer
)
{
struct actsunit *up;
struct refclockproc *pp;
int dtr = TIOCM_DTR;
char tbuf[SMAX];
#ifdef DEBUG
u_int modem;
#endif
/*
* What to do depends on the state and the first token in the
* message. */
pp = peer->procptr;
up = (struct actsunit *)pp->unitptr;
#ifdef DEBUG
ioctl(pp->io.fd, TIOCMGET, (char *)&modem);
snprintf(tbuf, sizeof(tbuf), "acts: %04x (%d %d) %lu %s", modem,
up->state, up->timer, (u_long)strlen(pp->a_lastcode),
pp->a_lastcode);
if (debug)
printf("%s\n", tbuf);
#endif
/*
* Extract the first token in the line. A NO token sends the
* message to the clockstats.
*/
strncpy(tbuf, pp->a_lastcode, SMAX);
strtok(tbuf, " ");
if (strcmp(tbuf, "NO") == 0) {
report_event(PEVNT_CLOCK, peer, pp->a_lastcode);
return;
}
switch(up->state) {
/*
* We are waiting for the OK response to the modem setup
* command. When this happens, raise DTR and dial the number
* followed by \r.
*/
case S_OK:
if (strcmp(tbuf, "OK") != 0) {
msyslog(LOG_ERR, "acts: setup error %s",
pp->a_lastcode);
acts_disc(peer);
return;
}
ioctl(pp->io.fd, TIOCMBIS, (char *)&dtr);
up->state = S_DTR;
up->timer = DTR;
return;
/*
* We are waiting for the call to be answered. All we care about
* here is token CONNECT. Send the message to the clockstats.
*/
case S_CONNECT:
report_event(PEVNT_CLOCK, peer, pp->a_lastcode);
if (strcmp(tbuf, "CONNECT") != 0) {
acts_disc(peer);
return;
}
up->state = S_FIRST;
up->timer = CONNECT;
return;
/*
* We are waiting for a timecode. Pass it to the parser.
*/
case S_FIRST:
case S_MSG:
acts_timecode(peer, pp->a_lastcode);
break;
}
}
/*
* acts_timecode - identify the service and parse the timecode message
*/
void
acts_timecode(
struct peer *peer, /* peer structure pointer */
char *str /* timecode string */
)
{
struct actsunit *up;
struct refclockproc *pp;
int day; /* day of the month */
int month; /* month of the year */
u_long mjd; /* Modified Julian Day */
double dut1; /* DUT adjustment */
u_int dst; /* ACTS daylight/standard time */
u_int leap; /* ACTS leap indicator */
double msADV; /* ACTS transmit advance (ms) */
char utc[10]; /* ACTS timescale */
char flag; /* ACTS on-time character (* or #) */
char synchar; /* WWVB synchronized indicator */
char qualchar; /* WWVB quality indicator */
char leapchar; /* WWVB leap indicator */
char dstchar; /* WWVB daylight/savings indicator */
int tz; /* WWVB timezone */
u_int leapmonth; /* PTB/NPL month of leap */
char leapdir; /* PTB/NPL leap direction */
/*
* The parser selects the modem format based on the message
* length. Since the data are checked carefully, occasional
* errors due noise are forgivable.
*/
pp = peer->procptr;
up = (struct actsunit *)pp->unitptr;
pp->nsec = 0;
switch(strlen(str)) {
/*
* For USNO format on-time character '*', which is on a line by
* itself. Be sure a timecode has been received.
*/
case 1:
if (*str == '*' && up->msgcnt > 0)
break;
return;
/*
* ACTS format: "jjjjj yy-mm-dd hh:mm:ss ds l uuu aaaaa
* UTC(NIST) *"
*/
case LENACTS:
if (sscanf(str,
"%5ld %2d-%2d-%2d %2d:%2d:%2d %2d %1d %3lf %5lf %9s %c",
&mjd, &pp->year, &month, &day, &pp->hour,
&pp->minute, &pp->second, &dst, &leap, &dut1,
&msADV, utc, &flag) != 13) {
refclock_report(peer, CEVNT_BADREPLY);
return;
}
/*
* Wait until ACTS has calculated the roundtrip delay.
* We don't need to do anything, as ACTS adjusts the
* on-time epoch.
*/
if (flag != '#')
return;
pp->day = ymd2yd(pp->year, month, day);
pp->leap = LEAP_NOWARNING;
if (leap == 1)
pp->leap = LEAP_ADDSECOND;
else if (pp->leap == 2)
pp->leap = LEAP_DELSECOND;
memcpy(&pp->refid, REFACTS, 4);
if (up->msgcnt == 0)
record_clock_stats(&peer->srcadr, str);
up->msgcnt++;
break;
/*
* USNO format: "jjjjj nnn hhmmss UTC"
*/
case LENUSNO:
if (sscanf(str, "%5ld %3d %2d%2d%2d %3s",
&mjd, &pp->day, &pp->hour, &pp->minute,
&pp->second, utc) != 6) {
refclock_report(peer, CEVNT_BADREPLY);
return;
}
/*
* Wait for the on-time character, which follows in a
* separate message. There is no provision for leap
* warning.
*/
pp->leap = LEAP_NOWARNING;
memcpy(&pp->refid, REFUSNO, 4);
if (up->msgcnt == 0)
record_clock_stats(&peer->srcadr, str);
up->msgcnt++;
return;
/*
* PTB/NPL format: "yyyy-mm-dd hh:mm:ss MEZ"
*/
case LENPTB:
if (sscanf(str,
"%*4d-%*2d-%*2d %*2d:%*2d:%2d %*5c%*12c%4d%2d%2d%2d%2d%5ld%2lf%c%2d%3lf%*15c%c",
&pp->second, &pp->year, &month, &day, &pp->hour,
&pp->minute, &mjd, &dut1, &leapdir, &leapmonth,
&msADV, &flag) != 12) {
refclock_report(peer, CEVNT_BADREPLY);
return;
}
pp->leap = LEAP_NOWARNING;
if (leapmonth == month) {
if (leapdir == '+')
pp->leap = LEAP_ADDSECOND;
else if (leapdir == '-')
pp->leap = LEAP_DELSECOND;
}
pp->day = ymd2yd(pp->year, month, day);
memcpy(&pp->refid, REFPTB, 4);
if (up->msgcnt == 0)
record_clock_stats(&peer->srcadr, str);
up->msgcnt++;
break;
/*
* WWVB format 0: "I ddd hh:mm:ss DTZ=nn"
*/
case LENWWVB0:
if (sscanf(str, "%c %3d %2d:%2d:%2d %cTZ=%2d",
&synchar, &pp->day, &pp->hour, &pp->minute,
&pp->second, &dstchar, &tz) != 7) {
refclock_report(peer, CEVNT_BADREPLY);
return;
}
pp->leap = LEAP_NOWARNING;
if (synchar != ' ')
pp->leap = LEAP_NOTINSYNC;
memcpy(&pp->refid, REFWWVB, 4);
if (up->msgcnt == 0)
record_clock_stats(&peer->srcadr, str);
up->msgcnt++;
break;
/*
* WWVB format 2: "IQyy ddd hh:mm:ss.mmm LD"
*/
case LENWWVB2:
if (sscanf(str, "%c%c%2d %3d %2d:%2d:%2d.%3ld%c%c%c",
&synchar, &qualchar, &pp->year, &pp->day,
&pp->hour, &pp->minute, &pp->second, &pp->nsec,
&dstchar, &leapchar, &dstchar) != 11) {
refclock_report(peer, CEVNT_BADREPLY);
return;
}
pp->nsec *= 1000000;
pp->leap = LEAP_NOWARNING;
if (synchar != ' ')
pp->leap = LEAP_NOTINSYNC;
else if (leapchar == 'L')
pp->leap = LEAP_ADDSECOND;
memcpy(&pp->refid, REFWWVB, 4);
if (up->msgcnt == 0)
record_clock_stats(&peer->srcadr, str);
up->msgcnt++;
break;
/*
* None of the above. Just forget about it and wait for the next
* message or timeout.
*/
default:
return;
}
/*
* We have a valid timecode. The fudge time1 value is added to
* each sample by the main line routines. Note that in current
* telephone networks the propatation time can be different for
* each call and can reach 200 ms for some calls.
*/
peer->refid = pp->refid;
pp->lastrec = up->tstamp;
if (!refclock_process(pp)) {
refclock_report(peer, CEVNT_BADTIME);
return;
}
pp->lastref = pp->lastrec;
if (up->state != S_MSG) {
up->state = S_MSG;
up->timer = TIMECODE;
}
}
/*
* acts_poll - called by the transmit routine
*/
static void
acts_poll (
int unit,
struct peer *peer
)
{
struct actsunit *up;
struct refclockproc *pp;
/*
* This routine is called at every system poll. All it does is
* set flag1 under certain conditions. The real work is done by
* the timeout routine and state machine.
*/
pp = peer->procptr;
up = (struct actsunit *)pp->unitptr;
switch (peer->ttl) {
/*
* In manual mode the calling program is activated by the ntpdc
* program using the enable flag (fudge flag1), either manually
* or by a cron job.
*/
case MODE_MANUAL:
/* fall through */
break;
/*
* In automatic mode the calling program runs continuously at
* intervals determined by the poll event or specified timeout.
*/
case MODE_AUTO:
pp->sloppyclockflag |= CLK_FLAG1;
break;
/*
* In backup mode the calling program runs continuously as long
* as either no peers are available or this peer is selected.
*/
case MODE_BACKUP:
if (sys_peer == NULL || sys_peer == peer)
pp->sloppyclockflag |= CLK_FLAG1;
break;
}
}
/*
* acts_timer - called at one-second intervals
*/
static void
acts_timer(
int unit,
struct peer *peer
)
{
struct actsunit *up;
struct refclockproc *pp;
/*
* This routine implments a timeout which runs for a programmed
* interval. The counter is initialized by the state machine and
* counts down to zero. Upon reaching zero, the state machine is
* called. If flag1 is set while in S_IDLE state, force a
* timeout.
*/
pp = peer->procptr;
up = (struct actsunit *)pp->unitptr;
if (pp->sloppyclockflag & CLK_FLAG1 && up->state == S_IDLE) {
acts_timeout(peer);
return;
}
if (up->timer == 0)
return;
up->timer--;
if (up->timer == 0)
acts_timeout(peer);
}
/*
* acts_timeout - called on timeout
*/
static void
acts_timeout(
struct peer *peer
)
{
struct actsunit *up;
struct refclockproc *pp;
int fd;
char device[20];
char lockfile[128], pidbuf[8];
char tbuf[SMAX];
/*
* The state machine is driven by messages from the modem, when
* first stated and at timeout.
*/
pp = peer->procptr;
up = (struct actsunit *)pp->unitptr;
pp->sloppyclockflag &= ~CLK_FLAG1;
if (sys_phone[up->retry] == NULL && !(pp->sloppyclockflag &
CLK_FLAG3)) {
msyslog(LOG_ERR, "acts: no phones");
return;
}
switch(up->state) {
/*
* System poll event. Lock the modem port and open the device.
*/
case S_IDLE:
/*
* Lock the modem port. If busy, retry later. Note: if
* something fails between here and the close, the lock
* file may not be removed.
*/
if (pp->sloppyclockflag & CLK_FLAG2) {
snprintf(lockfile, sizeof(lockfile), LOCKFILE,
up->unit);
fd = open(lockfile, O_WRONLY | O_CREAT | O_EXCL,
0644);
if (fd < 0) {
msyslog(LOG_ERR, "acts: port busy");
return;
}
snprintf(pidbuf, sizeof(pidbuf), "%d\n",
(u_int)getpid());
write(fd, pidbuf, strlen(pidbuf));
close(fd);
}
/*
* Open the device in raw mode and link the I/O.
*/
if (!pp->io.fd) {
snprintf(device, sizeof(device), DEVICE,
up->unit);
fd = refclock_open(device, SPEED232,
LDISC_ACTS | LDISC_RAW | LDISC_REMOTE);
if (fd == 0) {
msyslog(LOG_ERR,
"acts: open fails");
return;
}
pp->io.fd = fd;
if (!io_addclock(&pp->io)) {
msyslog(LOG_ERR,
"acts: addclock fails");
close(fd);
pp->io.fd = 0;
return;
}
}
/*
* If the port is directly connected to the device, skip
* the modem business and send 'T' for Spectrabum.
*/
if (pp->sloppyclockflag & CLK_FLAG3) {
if (write(pp->io.fd, "T", 1) < 0) {
msyslog(LOG_ERR, "acts: write %m");
return;
}
up->state = S_FIRST;
up->timer = CONNECT;
return;
}
/*
* Initialize the modem. This works with Hayes commands.
*/
#ifdef DEBUG
if (debug)
printf("acts: setup %s\n", MODEM_SETUP);
#endif
if (write(pp->io.fd, MODEM_SETUP, strlen(MODEM_SETUP)) <
0) {
msyslog(LOG_ERR, "acts: write %m");
return;
}
up->state = S_OK;
up->timer = SETUP;
return;
/*
* In OK state the modem did not respond to setup.
*/
case S_OK:
msyslog(LOG_ERR, "acts: no modem");
break;
/*
* In DTR state we are waiting for the modem to settle down
* before hammering it with a dial command.
*/
case S_DTR:
snprintf(tbuf, sizeof(tbuf), "DIAL #%d %s", up->retry,
sys_phone[up->retry]);
report_event(PEVNT_CLOCK, peer, tbuf);
#ifdef DEBUG
if (debug)
printf("%s\n", tbuf);
#endif
write(pp->io.fd, sys_phone[up->retry],
strlen(sys_phone[up->retry]));
write(pp->io.fd, "\r", 1);
up->state = S_CONNECT;
up->timer = ANSWER;
return;
/*
* In CONNECT state the call did not complete.
*/
case S_CONNECT:
msyslog(LOG_ERR, "acts: no answer");
break;
/*
* In FIRST state no messages were received.
*/
case S_FIRST:
msyslog(LOG_ERR, "acts: no messages");
break;
/*
* In CLOSE state hangup is complete. Close the doors and
* windows and get some air.
*/
case S_CLOSE:
/*
* Close the device and unlock a shared modem.
*/
if (pp->io.fd) {
io_closeclock(&pp->io);
close(pp->io.fd);
if (pp->sloppyclockflag & CLK_FLAG2) {
snprintf(lockfile, sizeof(lockfile),
LOCKFILE, up->unit);
unlink(lockfile);
}
pp->io.fd = 0;
}
/*
* If messages were received, fold the tent and wait for
* the next poll. If no messages and there are more
* numbers to dial, retry after a short wait.
*/
up->bufptr = pp->a_lastcode;
up->timer = 0;
up->state = S_IDLE;
if ( up->msgcnt == 0) {
up->retry++;
if (sys_phone[up->retry] == NULL)
up->retry = 0;
else
up->timer = SETUP;
} else {
up->retry = 0;
}
up->msgcnt = 0;
return;
}
acts_disc(peer);
}
/*
* acts_disc - disconnect the call and clean the place up.
*/
static void
acts_disc (
struct peer *peer
)
{
struct actsunit *up;
struct refclockproc *pp;
int dtr = TIOCM_DTR;
/*
* We get here if the call terminated successfully or if an
* error occured. If the median filter has something in it,
* feed the data to the clock filter. If a modem port, drop DTR
* to force command mode and send modem hangup.
*/
pp = peer->procptr;
up = (struct actsunit *)pp->unitptr;
if (up->msgcnt > 0)
refclock_receive(peer);
if (!(pp->sloppyclockflag & CLK_FLAG3)) {
ioctl(pp->io.fd, TIOCMBIC, (char *)&dtr);
write(pp->io.fd, MODEM_HANGUP, strlen(MODEM_HANGUP));
}
up->timer = SETUP;
up->state = S_CLOSE;
}
#else
int refclock_acts_bs;
#endif /* REFCLOCK */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to refclock_acts.c CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / ntpd