/* refclock_bancomm.c - clock driver for the Datum/Bancomm bc635VME
* Time and Frequency Processor. It requires the BANCOMM bc635VME/
* bc350VXI Time and Frequency Processor Module Driver for SunOS4.x
* and SunOS5.x UNIX Systems. It has been tested on a UltraSparc
* IIi-cEngine running Solaris 2.6.
*
* Author(s): Ganesh Ramasivan & Gary Cliff, Computing Devices Canada,
* Ottawa, Canada
*
* Date: July 1999
*
* Note(s): The refclock type has been defined as 16.
*
* This program has been modelled after the Bancomm driver
* originally written by R. Schmidt of Time Service, U.S.
* Naval Observatory for a HP-UX machine. Since the original
* authors no longer plan to maintain this code, all
* references to the HP-UX vme2 driver subsystem bave been
* removed. Functions vme_report_event(), vme_receive(),
* vme_control() and vme_buginfo() have been deleted because
* they are no longer being used.
*
* 04/28/2005 Rob Neal
* Modified to add support for Symmetricom bc637PCI-U Time &
* Frequency Processor.
* 2/21/2007 Ali Ghorashi
* Modified to add support for Symmetricom bc637PCI-U Time &
* Frequency Processor on Solaris.
* Tested on Solaris 10 with a bc635 card.
*
* Card bus type (VME/VXI or PCI) and environment are specified via the
* "mode" keyword on the server command in ntp.conf.
* server 127.127.16.u prefer mode M
* where u is the id (usually 0) of the entry in /dev (/dev/stfp0)
*
* and M is one of the following modes:
* 1 : FreeBSD PCI 635/637.
* 2 : Linux or Windows PCI 635/637.
* 3 : Solaris PCI 635/637
* not specified, or other number:
* : Assumed to be VME/VXI legacy Bancomm card on Solaris.
* Linux and Windows platforms require Symmetricoms' proprietary driver
* for the TFP card.
* Solaris requires Symmetricom's driver and its header file (freely distributed) to
* be installed and running.
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#if defined(REFCLOCK) && defined(CLOCK_BANC)
#include "ntpd.h"
#include "ntp_io.h"
#include "ntp_refclock.h"
#include "ntp_unixtime.h"
#include "ntp_stdlib.h"
#include <stdio.h>
#include <syslog.h>
#include <ctype.h>
struct btfp_time /* Structure for reading 5 time words */
/* in one ioctl(2) operation. */
{
unsigned short btfp_time[5]; /* Time words 0,1,2,3, and 4. (16bit)*/
};
/* SunOS5 ioctl commands definitions.*/
#define BTFPIOC ( 'b'<< 8 )
#define IOCIO( l, n ) ( BTFPIOC | n )
#define IOCIOR( l, n, s ) ( BTFPIOC | n )
#define IOCIORN( l, n, s ) ( BTFPIOC | n )
#define IOCIOWN( l, n, s ) ( BTFPIOC | n )
/***** Simple ioctl commands *****/
#define RUNLOCK IOCIOR(b, 19, int ) /* Release Capture Lockout */
#define RCR0 IOCIOR(b, 22, int ) /* Read control register zero.*/
#define WCR0 IOCIOWN(b, 23, int) /* Write control register zero*/
/***** Compound ioctl commands *****/
/* Read all 5 time words in one call. */
#define READTIME IOCIORN(b, 32, sizeof( struct btfp_time ))
#if defined(__FreeBSD__)
#undef READTIME
#define READTIME _IOR('u', 5, struct btfp_time )
#endif
/* Solaris specific section */
struct stfp_tm {
int32_t tm_sec;
int32_t tm_min;
int32_t tm_hour;
int32_t tm_mday;
int32_t tm_mon;
int32_t tm_year;
int32_t tm_wday;
int32_t tm_yday;
int32_t tm_isdst;
};
struct stfp_time {
struct stfp_tm tm;
int32_t usec; /* usec 0 - 999999 */
int32_t hnsec; /* hnsec 0 - 9 (hundreds of nsecs) */
int32_t status;
};
#define SELTIMEFORMAT 2
# define TIME_DECIMAL 0
# define TIME_BINARY 1
#if defined(__sun__)
#undef READTIME
#define READTIME 9
#endif /** __sun___ **/
/* end solaris specific section */
struct vmedate { /* structure returned by get_vmetime.c */
unsigned short year;
unsigned short day;
unsigned short hr;
unsigned short mn;
unsigned short sec;
long frac;
unsigned short status;
};
typedef void *SYMMT_PCI_HANDLE;
/*
* VME interface parameters.
*/
#define VMEPRECISION (-21) /* precision assumed (1 us) */
#define USNOREFID "BTFP" /* or whatever */
#define VMEREFID "BTFP" /* reference id */
#define VMEDESCRIPTION "Bancomm bc635 TFP" /* who we are */
#define VMEHSREFID 0x7f7f1000 /* 127.127.16.00 refid hi strata */
/* clock type 16 is used here */
#define GMT 0 /* hour offset from Greenwich */
/*
* Imported from ntp_timer module
*/
extern u_long current_time; /* current time(s) */
/*
* Imported from ntpd module
*/
extern volatile int debug; /* global debug flag */
/*
* VME unit control structure.
* Changes made to vmeunit structure. Most members are now available in the
* new refclockproc structure in ntp_refclock.h - 07/99 - Ganesh Ramasivan
*/
struct vmeunit {
struct vmedate vmedata; /* data returned from vme read */
u_long lasttime; /* last time clock heard from */
};
/*
* Function prototypes
*/
static int vme_start (int, struct peer *);
static void vme_shutdown (int, struct peer *);
static void vme_receive (struct recvbuf *);
static void vme_poll (int unit, struct peer *);
struct vmedate *get_datumtime(struct vmedate *);
void tvme_fill(struct vmedate *, uint32_t btm[2]);
void stfp_time2tvme(struct vmedate *time_vme, struct stfp_time *stfp);
inline const char *DEVICE_NAME(int n);
/*
* Define the bc*() functions as weak so we can compile/link without them.
* Only clients with the card will have the proprietary vendor device driver
* and interface library needed for use on Linux/Windows platforms.
*/
extern uint32_t __attribute__ ((weak)) bcReadBinTime(SYMMT_PCI_HANDLE, uint32_t *, uint32_t*, uint8_t*);
extern SYMMT_PCI_HANDLE __attribute__ ((weak)) bcStartPci(void);
extern void __attribute__ ((weak)) bcStopPci(SYMMT_PCI_HANDLE);
/*
* Transfer vector
*/
struct refclock refclock_bancomm = {
vme_start, /* start up driver */
vme_shutdown, /* shut down driver */
vme_poll, /* transmit poll message */
noentry, /* not used (old vme_control) */
noentry, /* initialize driver */
noentry, /* not used (old vme_buginfo) */
NOFLAGS /* not used */
};
int fd_vme; /* file descriptor for ioctls */
int regvalue;
int tfp_type; /* mode selector, indicate platform and driver interface */
SYMMT_PCI_HANDLE stfp_handle;
/**
* this macro returns the device name based on
* the platform we are running on and the device number
*/
#if defined(__sun__)
inline const char *DEVICE_NAME(int n) {static char s[20]={0}; snprintf(s,19,"/dev/stfp%d",n);return s;}
#else
inline const char* DEVICE_NAME(int n) {static char s[20]={0}; snprintf(s,19,"/dev/btfp%d",n);return s;}
#endif /**__sun__**/
/*
* vme_start - open the VME device and initialize data for processing
*/
static int
vme_start(
int unit,
struct peer *peer
)
{
register struct vmeunit *vme;
struct refclockproc *pp;
int dummy;
char vmedev[20];
tfp_type = (int)(peer->ttl);
switch (tfp_type) {
case 1:
case 3:
break;
case 2:
stfp_handle = bcStartPci(); /* init the card in lin/win */
break;
default:
break;
}
/*
* Open VME device
*/
#ifdef DEBUG
printf("Opening DATUM DEVICE %s\n",DEVICE_NAME(peer->refclkunit));
#endif
if ( (fd_vme = open(DEVICE_NAME(peer->refclkunit), O_RDWR)) < 0) {
msyslog(LOG_ERR, "vme_start: failed open of %s: %m", vmedev);
return (0);
}
else {
switch (tfp_type) {
case 1: break;
case 2: break;
case 3:break;
default:
/* Release capture lockout in case it was set before. */
if( ioctl( fd_vme, RUNLOCK, &dummy ) )
msyslog(LOG_ERR, "vme_start: RUNLOCK failed %m");
regvalue = 0; /* More esoteric stuff to do... */
if( ioctl( fd_vme, WCR0, ®value ) )
msyslog(LOG_ERR, "vme_start: WCR0 failed %m");
break;
}
}
/*
* Allocate unit structure
*/
vme = (struct vmeunit *)emalloc(sizeof(struct vmeunit));
bzero((char *)vme, sizeof(struct vmeunit));
/*
* Set up the structures
*/
pp = peer->procptr;
pp->unitptr = (caddr_t) vme;
pp->timestarted = current_time;
pp->io.clock_recv = vme_receive;
pp->io.srcclock = (caddr_t)peer;
pp->io.datalen = 0;
pp->io.fd = fd_vme;
/*
* All done. Initialize a few random peer variables, then
* return success. Note that root delay and root dispersion are
* always zero for this clock.
*/
peer->precision = VMEPRECISION;
memcpy(&pp->refid, USNOREFID,4);
return (1);
}
/*
* vme_shutdown - shut down a VME clock
*/
static void
vme_shutdown(
int unit,
struct peer *peer
)
{
register struct vmeunit *vme;
struct refclockproc *pp;
/*
* Tell the I/O module to turn us off. We're history.
*/
pp = peer->procptr;
vme = (struct vmeunit *)pp->unitptr;
io_closeclock(&pp->io);
pp->unitptr = NULL;
if (NULL != vme)
free(vme);
if (tfp_type == 2)
bcStopPci(stfp_handle);
}
/*
* vme_receive - receive data from the VME device.
*
* Note: This interface would be interrupt-driven. We don't use that
* now, but include a dummy routine for possible future adventures.
*/
static void
vme_receive(
struct recvbuf *rbufp
)
{
}
/*
* vme_poll - called by the transmit procedure
*/
static void
vme_poll(
int unit,
struct peer *peer
)
{
struct vmedate *tptr;
struct vmeunit *vme;
struct refclockproc *pp;
time_t tloc;
struct tm *tadr;
pp = peer->procptr;
vme = (struct vmeunit *)pp->unitptr; /* Here is the structure */
tptr = &vme->vmedata;
if ((tptr = get_datumtime(tptr)) == NULL ) {
refclock_report(peer, CEVNT_BADREPLY);
return;
}
get_systime(&pp->lastrec);
pp->polls++;
vme->lasttime = current_time;
/*
* Get VME time and convert to timestamp format.
* The year must come from the system clock.
*/
time(&tloc);
tadr = gmtime(&tloc);
tptr->year = (unsigned short)(tadr->tm_year + 1900);
snprintf(pp->a_lastcode,
sizeof(pp->a_lastcode),
"%3.3d %2.2d:%2.2d:%2.2d.%.6ld %1d",
tptr->day,
tptr->hr,
tptr->mn,
tptr->sec,
tptr->frac,
tptr->status);
pp->lencode = (u_short) strlen(pp->a_lastcode);
pp->day = tptr->day;
pp->hour = tptr->hr;
pp->minute = tptr->mn;
pp->second = tptr->sec;
pp->nsec = tptr->frac;
#ifdef DEBUG
if (debug)
printf("pp: %3d %02d:%02d:%02d.%06ld %1x\n",
pp->day, pp->hour, pp->minute, pp->second,
pp->nsec, tptr->status);
#endif
if (tptr->status ) { /* Status 0 is locked to ref., 1 is not */
refclock_report(peer, CEVNT_BADREPLY);
return;
}
/*
* Now, compute the reference time value. Use the heavy
* machinery for the seconds and the millisecond field for the
* fraction when present. If an error in conversion to internal
* format is found, the program declares bad data and exits.
* Note that this code does not yet know how to do the years and
* relies on the clock-calendar chip for sanity.
*/
if (!refclock_process(pp)) {
refclock_report(peer, CEVNT_BADTIME);
return;
}
pp->lastref = pp->lastrec;
refclock_receive(peer);
record_clock_stats(&peer->srcadr, pp->a_lastcode);
}
struct vmedate *
get_datumtime(struct vmedate *time_vme)
{
char cbuf[7];
struct btfp_time vts;
uint32_t btm[2];
uint8_t dmy;
struct stfp_time stfpm;
if (time_vme == NULL)
time_vme = emalloc(sizeof(*time_vme));
switch (tfp_type) {
case 1: /* BSD, PCI, 2 32bit time words */
if (ioctl(fd_vme, READTIME, &btm)) {
msyslog(LOG_ERR, "get_bc63x error: %m");
return(NULL);
}
tvme_fill(time_vme, btm);
break;
case 2: /* Linux/Windows, PCI, 2 32bit time words */
if (bcReadBinTime(stfp_handle, &btm[1], &btm[0], &dmy) == 0) {
msyslog(LOG_ERR, "get_datumtime error: %m");
return(NULL);
}
tvme_fill(time_vme, btm);
break;
case 3: /** solaris **/
memset(&stfpm,0,sizeof(stfpm));
/* we need the time in decimal format */
/* Here we rudely assume that we are the only user of the driver.
* Other programs will have to set their own time format before reading
* the time.
*/
if(ioctl (fd_vme, SELTIMEFORMAT, TIME_DECIMAL)){
msyslog(LOG_ERR, "Could not set time format\n");
return (NULL);
}
/* read the time */
if (ioctl(fd_vme, READTIME, &stfpm)) {
msyslog(LOG_ERR, "ioctl error: %m");
return(NULL);
}
stfp_time2tvme(time_vme, &stfpm);
break;
default: /* legacy bancomm card */
if (ioctl(fd_vme, READTIME, &vts)) {
msyslog(LOG_ERR,
"get_datumtime error: %m");
return(NULL);
}
/* Get day */
snprintf(cbuf, sizeof(cbuf), "%3.3x",
((vts.btfp_time[ 0 ] & 0x000f) << 8) +
((vts.btfp_time[ 1 ] & 0xff00) >> 8));
time_vme->day = (unsigned short)atoi(cbuf);
/* Get hour */
snprintf(cbuf, sizeof(cbuf), "%2.2x",
vts.btfp_time[ 1 ] & 0x00ff);
time_vme->hr = (unsigned short)atoi(cbuf);
/* Get minutes */
snprintf(cbuf, sizeof(cbuf), "%2.2x",
(vts.btfp_time[ 2 ] & 0xff00) >> 8);
time_vme->mn = (unsigned short)atoi(cbuf);
/* Get seconds */
snprintf(cbuf, sizeof(cbuf), "%2.2x",
vts.btfp_time[ 2 ] & 0x00ff);
time_vme->sec = (unsigned short)atoi(cbuf);
/* Get microseconds. Yes, we ignore the 0.1 microsecond digit so
we can use the TVTOTSF function later on...*/
snprintf(cbuf, sizeof(cbuf), "%4.4x%2.2x",
vts.btfp_time[ 3 ],
vts.btfp_time[ 4 ] >> 8);
time_vme->frac = (u_long) atoi(cbuf);
/* Get status bit */
time_vme->status = (vts.btfp_time[0] & 0x0010) >> 4;
break;
}
if (time_vme->status)
return ((void *)NULL);
else
return (time_vme);
}
/* Assign values to time_vme struct. Mostly for readability */
void
tvme_fill(struct vmedate *time_vme, uint32_t btm[2])
{
struct tm maj;
uint32_t dmaj, dmin;
dmaj = btm[1]; /* syntax sugar */
dmin = btm[0];
gmtime_r(&dmaj, &maj);
time_vme->day = maj.tm_yday+1;
time_vme->hr = maj.tm_hour;
time_vme->mn = maj.tm_min;
time_vme->sec = maj.tm_sec;
time_vme->frac = (dmin & 0x000fffff) * 1000;
time_vme->frac += ((dmin & 0x00f00000) >> 20) * 100;
time_vme->status = (dmin & 0x01000000) >> 24;
return;
}
/* Assign values to time_vme struct. Mostly for readability */
void
stfp_time2tvme(struct vmedate *time_vme, struct stfp_time *stfp)
{
time_vme->day = stfp->tm.tm_yday+1;
time_vme->hr = stfp->tm.tm_hour;
time_vme->mn = stfp->tm.tm_min;
time_vme->sec = stfp->tm.tm_sec;
time_vme->frac = stfp->usec*1000;
time_vme->frac += stfp->hnsec * 100;
time_vme->status = stfp->status;
return;
}
#else
int refclock_bancomm_bs;
#endif /* REFCLOCK */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to refclock_bancomm.c CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / ntpd