/*
* refclock_jjy - clock driver for JJY receivers
*/
/**********************************************************************/
/* */
/* Copyright (C) 2001-2004, Takao Abe. All rights reserved. */
/* */
/* Permission to use, copy, modify, and distribute this software */
/* and its documentation for any purpose is hereby granted */
/* without fee, provided that the following conditions are met: */
/* */
/* One retains the entire copyright notice properly, and both the */
/* copyright notice and this license. in the documentation and/or */
/* other materials provided with the distribution. */
/* */
/* This software and the name of the author must not be used to */
/* endorse or promote products derived from this software without */
/* prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT EXPRESSED OR IMPLIED */
/* WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, THE */
/* IMPLIED WARRANTIES OF MERCHANTABLILITY AND FITNESS FOR A */
/* PARTICULAR PURPOSE. */
/* IN NO EVENT SHALL THE AUTHOR TAKAO ABE BE LIABLE FOR ANY DIRECT, */
/* INDIRECT, GENERAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES */
/* ( INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE */
/* GOODS OR SERVICES; LOSS OF USE, DATA OR PROFITS; OR BUSINESS */
/* INTERRUPTION ) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ( INCLUDING */
/* NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE USE OF */
/* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* */
/* This driver is developed in my private time, and is opened as */
/* voluntary contributions for the NTP. */
/* The manufacturer of the JJY receiver has not participated in */
/* a development of this driver. */
/* The manufacturer does not warrant anything about this driver, */
/* and is not liable for anything about this driver. */
/* */
/**********************************************************************/
/* */
/* Author Takao Abe */
/* Email takao_abe@xurb.jp */
/* Homepage http://www.bea.hi-ho.ne.jp/abetakao/ */
/* */
/* The email address abetakao@bea.hi-ho.ne.jp is never read */
/* from 2010, because a few filtering rule are provided by the */
/* "hi-ho.ne.jp", and lots of spam mail are reached. */
/* New email address for supporting the refclock_jjy is */
/* takao_abe@xurb.jp */
/* */
/**********************************************************************/
/* */
/* History */
/* */
/* 2001/07/15 */
/* [New] Support the Tristate Ltd. JJY receiver */
/* */
/* 2001/08/04 */
/* [Change] Log to clockstats even if bad reply */
/* [Fix] PRECISION = (-3) (about 100 ms) */
/* [Add] Support the C-DEX Co.Ltd. JJY receiver */
/* */
/* 2001/12/04 */
/* [Fix] C-DEX JST2000 ( fukusima@goto.info.waseda.ac.jp ) */
/* */
/* 2002/07/12 */
/* [Fix] Portability for FreeBSD ( patched by the user ) */
/* */
/* 2004/10/31 */
/* [Change] Command send timing for the Tristate Ltd. JJY receiver */
/* JJY-01 ( Firmware version 2.01 ) */
/* Thanks to Andy Taki for testing under FreeBSD */
/* */
/* 2004/11/28 */
/* [Add] Support the Echo Keisokuki LT-2000 receiver */
/* */
/* 2006/11/04 */
/* [Fix] C-DEX JST2000 */
/* Thanks to Hideo Kuramatsu for the patch */
/* */
/* 2009/04/05 */
/* [Add] Support the CITIZEN T.I.C JJY-200 receiver */
/* */
/* 2010/11/20 */
/* [Change] Bug 1618 ( Harmless ) */
/* Code clean up ( Remove unreachable codes ) in */
/* jjy_start() */
/* [Change] Change clockstats format of the Tristate JJY01/02 */
/* Issues more command to get the status of the receiver */
/* when "fudge 127.127.40.X flag1 1" is specified */
/* ( DATE,STIM -> DCST,STUS,DATE,STIM ) */
/* */
/**********************************************************************/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#if defined(REFCLOCK) && defined(CLOCK_JJY)
#include <stdio.h>
#include <ctype.h>
#include <string.h>
#include <sys/time.h>
#include <time.h>
#include "ntpd.h"
#include "ntp_io.h"
#include "ntp_tty.h"
#include "ntp_refclock.h"
#include "ntp_calendar.h"
#include "ntp_stdlib.h"
/**********************************************************************/
/* */
/* The Tristate Ltd. JJY receiver JJY01 */
/* */
/* Command Response Remarks */
/* ------------ ---------------------- --------------------- */
/* dcst<CR><LF> VALID|INVALID<CR><LF> */
/* stus<CR><LF> ADJUSTED|UNADJUSTED<CR><LF> */
/* date<CR><LF> YYYY/MM/DD XXX<CR><LF> */
/* time<CR><LF> HH:MM:SS<CR><LF> */
/* stim<CR><LF> HH:MM:SS<CR><LF> Reply at just second */
/* */
/* During synchronization after a receiver is turned on, */
/* It replies the past time from 2000/01/01 00:00:00. */
/* The function "refclock_process" checks the time and tells */
/* as an insanity time. */
/* */
/**********************************************************************/
/* */
/* The C-DEX Co. Ltd. JJY receiver JST2000 */
/* */
/* Command Response Remarks */
/* ------------ ---------------------- --------------------- */
/* <ENQ>1J<ETX> <STX>JYYMMDD HHMMSSS<ETX> */
/* */
/**********************************************************************/
/* */
/* The Echo Keisokuki Co. Ltd. JJY receiver LT2000 */
/* */
/* Command Response Remarks */
/* ------------ ---------------------- --------------------- */
/* # Mode 1 (Request&Send) */
/* T YYMMDDWHHMMSS<BCC1><BCC2><CR> */
/* C Mode 2 (Continuous) */
/* YYMMDDWHHMMSS<ST1><ST2><ST3><ST4><CR> */
/* <SUB> Second signal */
/* */
/**********************************************************************/
/* */
/* The CITIZEN T.I.C CO., LTD. JJY receiver JJY200 */
/* */
/* Command Response Remarks */
/* ------------ ---------------------- --------------------- */
/* 'XX YY/MM/DD W HH:MM:SS<CR> */
/* XX: OK|NG|ER */
/* W: 0(Monday)-6(Sunday) */
/* */
/**********************************************************************/
/*
* Interface definitions
*/
#define DEVICE "/dev/jjy%d" /* device name and unit */
#define SPEED232 B9600 /* uart speed (9600 baud) */
#define SPEED232_TRISTATE_JJY01 B9600 /* UART speed (9600 baud) */
#define SPEED232_CDEX_JST2000 B9600 /* UART speed (9600 baud) */
#define SPEED232_ECHOKEISOKUKI_LT2000 B9600 /* UART speed (9600 baud) */
#define SPEED232_CITIZENTIC_JJY200 B4800 /* UART speed (4800 baud) */
#define REFID "JJY" /* reference ID */
#define DESCRIPTION "JJY Receiver"
#define PRECISION (-3) /* precision assumed (about 100 ms) */
/*
* JJY unit control structure
*/
struct jjyunit {
char unittype ; /* UNITTYPE_XXXXXXXXXX */
short operationmode ; /* Echo Keisokuki LT-2000 : 1 or 2 */
short version ;
short linediscipline ; /* LDISC_CLK or LDISC_RAW */
char bPollFlag ; /* Set by jjy_pool and Reset by jjy_receive */
int linecount ;
int lineerror ;
int year, month, day, hour, minute, second, msecond ;
/* LDISC_RAW only */
#define MAX_LINECOUNT 8
#define MAX_RAWBUF 64
int lineexpect ;
int charexpect [ MAX_LINECOUNT ] ;
int charcount ;
char rawbuf [ MAX_RAWBUF ] ;
};
#define UNITTYPE_TRISTATE_JJY01 1
#define UNITTYPE_CDEX_JST2000 2
#define UNITTYPE_ECHOKEISOKUKI_LT2000 3
#define UNITTYPE_CITIZENTIC_JJY200 4
/*
* Function prototypes
*/
static int jjy_start (int, struct peer *);
static void jjy_shutdown (int, struct peer *);
static void jjy_poll (int, struct peer *);
static void jjy_poll_tristate_jjy01 (int, struct peer *);
static void jjy_poll_cdex_jst2000 (int, struct peer *);
static void jjy_poll_echokeisokuki_lt2000(int, struct peer *);
static void jjy_poll_citizentic_jjy200 (int, struct peer *);
static void jjy_receive (struct recvbuf *);
static int jjy_receive_tristate_jjy01 (struct recvbuf *);
static int jjy_receive_cdex_jst2000 (struct recvbuf *);
static int jjy_receive_echokeisokuki_lt2000 (struct recvbuf *);
static int jjy_receive_citizentic_jjy200 (struct recvbuf *);
static void printableString ( char*, int, char*, int ) ;
/*
* Transfer vector
*/
struct refclock refclock_jjy = {
jjy_start, /* start up driver */
jjy_shutdown, /* shutdown driver */
jjy_poll, /* transmit poll message */
noentry, /* not used */
noentry, /* not used */
noentry, /* not used */
NOFLAGS /* not used */
};
/*
* Start up driver return code
*/
#define RC_START_SUCCESS 1
#define RC_START_ERROR 0
/*
* Local constants definition
*/
#define MAX_LOGTEXT 64
/*
* Tristate JJY01/JJY02 constants definition
*/
#define TS_JJY01_COMMAND_NUMBER_DATE 1
#define TS_JJY01_COMMAND_NUMBER_TIME 2
#define TS_JJY01_COMMAND_NUMBER_STIM 3
#define TS_JJY01_COMMAND_NUMBER_STUS 4
#define TS_JJY01_COMMAND_NUMBER_DCST 5
#define TS_JJY01_REPLY_DATE "yyyy/mm/dd www\r\n"
#define TS_JJY01_REPLY_STIM "hh:mm:ss\r\n"
#define TS_JJY01_REPLY_STUS_YES "adjusted\r\n"
#define TS_JJY01_REPLY_STUS_NO "unadjusted\r\n"
#define TS_JJY01_REPLY_DCST_VALID "valid\r\n"
#define TS_JJY01_REPLY_DCST_INVALID "invalid\r\n"
#define TS_JJY01_REPLY_LENGTH_DATE 14 /* Length without <CR><LF> */
#define TS_JJY01_REPLY_LENGTH_STIM 8 /* Length without <CR><LF> */
#define TS_JJY01_REPLY_LENGTH_STUS_YES 8 /* Length without <CR><LF> */
#define TS_JJY01_REPLY_LENGTH_STUS_NO 10 /* Length without <CR><LF> */
#define TS_JJY01_REPLY_LENGTH_DCST_VALID 5 /* Length without <CR><LF> */
#define TS_JJY01_REPLY_LENGTH_DCST_INVALID 7 /* Length without <CR><LF> */
static struct
{
char commandNumber ;
char *commandLog ;
char *command ;
int commandLength ;
} tristate_jjy01_command_sequence[] =
{
/* dcst<CR><LF> -> VALID<CR><LF> or INVALID<CR><LF> */
{ TS_JJY01_COMMAND_NUMBER_DCST, "dcst", "dcst\r\n", 6 },
/* stus<CR><LF> -> ADJUSTED<CR><LF> or UNADJUSTED<CR><LF> */
{ TS_JJY01_COMMAND_NUMBER_STUS, "stus", "stus\r\n", 6 },
/* date<CR><LF> -> YYYY/MM/DD WWW<CR><LF> */
{ TS_JJY01_COMMAND_NUMBER_DATE, "date", "date\r\n", 6 },
/* stim<CR><LF> -> HH:MM:SS<CR><LF> */
{ TS_JJY01_COMMAND_NUMBER_STIM, "stim", "stim\r\n", 6 },
{ 0 , NULL , NULL , 0 }
} ;
/**************************************************************************************************/
/* jjy_start - open the devices and initialize data for processing */
/**************************************************************************************************/
static int
jjy_start ( int unit, struct peer *peer )
{
struct jjyunit *up ;
struct refclockproc *pp ;
int fd ;
char *pDeviceName ;
short iDiscipline ;
int iSpeed232 ;
#ifdef DEBUG
if ( debug ) {
printf ( "jjy_start (refclock_jjy.c) : %s mode=%d ", ntoa(&peer->srcadr), peer->ttl ) ;
printf ( DEVICE, unit ) ;
printf ( "\n" ) ;
}
#endif
/*
* Open serial port
*/
pDeviceName = emalloc ( strlen(DEVICE) + 10 );
snprintf ( pDeviceName, strlen(DEVICE) + 10, DEVICE, unit ) ;
/*
* peer->ttl is a mode number specified by "127.127.40.X mode N" in the ntp.conf
*/
switch ( peer->ttl ) {
case 0 :
case 1 :
iDiscipline = LDISC_CLK ;
iSpeed232 = SPEED232_TRISTATE_JJY01 ;
break ;
case 2 :
iDiscipline = LDISC_RAW ;
iSpeed232 = SPEED232_CDEX_JST2000 ;
break ;
case 3 :
iDiscipline = LDISC_CLK ;
iSpeed232 = SPEED232_ECHOKEISOKUKI_LT2000 ;
break ;
case 4 :
iDiscipline = LDISC_CLK ;
iSpeed232 = SPEED232_CITIZENTIC_JJY200 ;
break ;
default :
msyslog ( LOG_ERR, "JJY receiver [ %s mode %d ] : Unsupported mode",
ntoa(&peer->srcadr), peer->ttl ) ;
free ( (void*) pDeviceName ) ;
return RC_START_ERROR ;
}
if ( ! ( fd = refclock_open ( pDeviceName, iSpeed232, iDiscipline ) ) ) {
free ( (void*) pDeviceName ) ;
return RC_START_ERROR ;
}
free ( (void*) pDeviceName ) ;
/*
* Allocate and initialize unit structure
*/
up = emalloc (sizeof(*up));
memset ( up, 0, sizeof(*up) ) ;
up->linediscipline = iDiscipline ;
/*
* peer->ttl is a mode number specified by "127.127.40.X mode N" in the ntp.conf
*/
switch ( peer->ttl ) {
case 0 :
/*
* The mode 0 is a default clock type at this time.
* But this will be change to auto-detect mode in the future.
*/
case 1 :
up->unittype = UNITTYPE_TRISTATE_JJY01 ;
up->version = 100 ;
/* 2010/11/20 */
/* Command sequence is defined by the struct tristate_jjy01_command_sequence, */
/* and the following 3 lines are not used in the mode LDISC_CLK. */
/* up->lineexpect = 2 ; */
/* up->charexpect[0] = 14 ; */ /* YYYY/MM/DD WWW<CR><LF> */
/* up->charexpect[1] = 8 ; */ /* HH:MM:SS<CR><LF> */
break ;
case 2 :
up->unittype = UNITTYPE_CDEX_JST2000 ;
up->lineexpect = 1 ;
up->charexpect[0] = 15 ; /* <STX>JYYMMDD HHMMSSS<ETX> */
break ;
case 3 :
up->unittype = UNITTYPE_ECHOKEISOKUKI_LT2000 ;
up->operationmode = 2 ; /* Mode 2 : Continuous mode */
up->lineexpect = 1 ;
switch ( up->operationmode ) {
case 1 :
up->charexpect[0] = 15 ; /* YYMMDDWHHMMSS<BCC1><BCC2><CR> */
break ;
case 2 :
up->charexpect[0] = 17 ; /* YYMMDDWHHMMSS<ST1><ST2><ST3><ST4><CR> */
break ;
}
break ;
case 4 :
up->unittype = UNITTYPE_CITIZENTIC_JJY200 ;
up->lineexpect = 1 ;
up->charexpect[0] = 23 ; /* 'XX YY/MM/DD W HH:MM:SS<CR> */
break ;
/* 2010/11/20 */
/* The "default:" section of this switch block is never executed, */
/* because the former switch block traps the same "default:" case. */
/* This "default:" section codes are removed to avoid spending time */
/* in the future looking, though the codes are functionally harmless. */
}
pp = peer->procptr ;
pp->unitptr = (caddr_t) up ;
pp->io.clock_recv = jjy_receive ;
pp->io.srcclock = (caddr_t) peer ;
pp->io.datalen = 0 ;
pp->io.fd = fd ;
if ( ! io_addclock(&pp->io) ) {
close ( fd ) ;
pp->io.fd = -1 ;
free ( up ) ;
pp->unitptr = NULL ;
return RC_START_ERROR ;
}
/*
* Initialize miscellaneous variables
*/
peer->precision = PRECISION ;
peer->burst = 1 ;
pp->clockdesc = DESCRIPTION ;
memcpy ( (char*)&pp->refid, REFID, strlen(REFID) ) ;
return RC_START_SUCCESS ;
}
/**************************************************************************************************/
/* jjy_shutdown - shutdown the clock */
/**************************************************************************************************/
static void
jjy_shutdown ( int unit, struct peer *peer )
{
struct jjyunit *up;
struct refclockproc *pp;
pp = peer->procptr ;
up = (struct jjyunit *) pp->unitptr ;
if ( -1 != pp->io.fd )
io_closeclock ( &pp->io ) ;
if ( NULL != up )
free ( up ) ;
}
/**************************************************************************************************/
/* jjy_receive - receive data from the serial interface */
/**************************************************************************************************/
static void
jjy_receive ( struct recvbuf *rbufp )
{
struct jjyunit *up ;
struct refclockproc *pp ;
struct peer *peer;
l_fp tRecvTimestamp; /* arrival timestamp */
int rc ;
char sLogText [ MAX_LOGTEXT ] ;
int i, bCntrlChar ;
/*
* Initialize pointers and read the timecode and timestamp
*/
peer = (struct peer *) rbufp->recv_srcclock ;
pp = peer->procptr ;
up = (struct jjyunit *) pp->unitptr ;
/*
* Get next input line
*/
pp->lencode = refclock_gtlin ( rbufp, pp->a_lastcode, BMAX, &tRecvTimestamp ) ;
if ( up->linediscipline == LDISC_RAW ) {
/*
* The reply with <STX> and <ETX> may give a blank line
*/
if ( pp->lencode == 0 && up->charcount == 0 ) return ;
/*
* Copy received charaters to temporary buffer
*/
for ( i = 0 ;
i < pp->lencode && up->charcount < MAX_RAWBUF - 2 ;
i ++ , up->charcount ++ ) {
up->rawbuf[up->charcount] = pp->a_lastcode[i] ;
}
while ( up->charcount > 0 && up->rawbuf[0] < ' ' ) {
for ( i = 0 ; i < up->charcount - 1 ; i ++ )
up->rawbuf[i] = up->rawbuf[i+1] ;
up->charcount -- ;
}
bCntrlChar = 0 ;
for ( i = 0 ; i < up->charcount ; i ++ ) {
if ( up->rawbuf[i] < ' ' ) {
bCntrlChar = 1 ;
break ;
}
}
if ( pp->lencode > 0 && up->linecount < up->lineexpect ) {
if ( bCntrlChar == 0 &&
up->charcount < up->charexpect[up->linecount] )
return ;
}
up->rawbuf[up->charcount] = 0 ;
} else {
/*
* The reply with <CR><LF> gives a blank line
*/
if ( pp->lencode == 0 ) return ;
}
/*
* We get down to business
*/
pp->lastrec = tRecvTimestamp ;
up->linecount ++ ;
if ( up->lineerror != 0 ) return ;
switch ( up->unittype ) {
case UNITTYPE_TRISTATE_JJY01 :
rc = jjy_receive_tristate_jjy01 ( rbufp ) ;
break ;
case UNITTYPE_CDEX_JST2000 :
rc = jjy_receive_cdex_jst2000 ( rbufp ) ;
break ;
case UNITTYPE_ECHOKEISOKUKI_LT2000 :
rc = jjy_receive_echokeisokuki_lt2000 ( rbufp ) ;
break ;
case UNITTYPE_CITIZENTIC_JJY200 :
rc = jjy_receive_citizentic_jjy200 ( rbufp ) ;
break ;
default :
rc = 0 ;
break ;
}
if ( up->linediscipline == LDISC_RAW ) {
if ( up->linecount <= up->lineexpect &&
up->charcount > up->charexpect[up->linecount-1] ) {
for ( i = 0 ;
i < up->charcount - up->charexpect[up->linecount-1] ;
i ++ ) {
up->rawbuf[i] = up->rawbuf[i+up->charexpect[up->linecount-1]] ;
}
up->charcount -= up->charexpect[up->linecount-1] ;
} else {
up->charcount = 0 ;
}
}
if ( rc == 0 )
return ;
up->bPollFlag = 0 ;
if ( up->lineerror != 0 ) {
refclock_report ( peer, CEVNT_BADREPLY ) ;
strncpy ( sLogText, "BAD REPLY [",
sizeof( sLogText ) ) ;
if ( up->linediscipline == LDISC_RAW ) {
strncat ( sLogText, up->rawbuf,
sizeof( sLogText ) -
strlen ( sLogText ) - 1 ) ;
} else {
strncat ( sLogText, pp->a_lastcode,
sizeof( sLogText ) -
strlen ( sLogText ) - 1 ) ;
}
sLogText[MAX_LOGTEXT-1] = 0 ;
if ( strlen ( sLogText ) < MAX_LOGTEXT - 2 )
strncat ( sLogText, "]",
sizeof( sLogText ) -
strlen ( sLogText ) - 1 ) ;
record_clock_stats ( &peer->srcadr, sLogText ) ;
return ;
}
pp->year = up->year ;
pp->day = ymd2yd ( up->year, up->month, up->day ) ;
pp->hour = up->hour ;
pp->minute = up->minute ;
pp->second = up->second ;
pp->nsec = up->msecond * 1000000;
/*
* JST to UTC
*/
pp->hour -= 9 ;
if ( pp->hour < 0 ) {
pp->hour += 24 ;
pp->day -- ;
if ( pp->day < 1 ) {
pp->year -- ;
pp->day = ymd2yd ( pp->year, 12, 31 ) ;
}
}
#ifdef DEBUG
if ( debug ) {
printf ( "jjy_receive (refclock_jjy.c) : %04d/%02d/%02d %02d:%02d:%02d.%1d JST ",
up->year, up->month, up->day, up->hour,
up->minute, up->second, up->msecond/100 ) ;
printf ( "( %04d/%03d %02d:%02d:%02d.%1d UTC )\n",
pp->year, pp->day, pp->hour, pp->minute,
pp->second, (int)(pp->nsec/100000000) ) ;
}
#endif
/*
* Process the new sample in the median filter and determine the
* timecode timestamp.
*/
snprintf ( sLogText, sizeof(sLogText),
"%04d/%02d/%02d %02d:%02d:%02d.%1d JST",
up->year, up->month, up->day,
up->hour, up->minute, up->second, up->msecond/100 ) ;
record_clock_stats ( &peer->srcadr, sLogText ) ;
if ( ! refclock_process ( pp ) ) {
refclock_report(peer, CEVNT_BADTIME);
return ;
}
pp->lastref = pp->lastrec;
refclock_receive(peer);
}
/**************************************************************************************************/
static int
jjy_receive_tristate_jjy01 ( struct recvbuf *rbufp )
{
static char *sFunctionName = "jjy_receive_tristate_jjy01" ;
struct jjyunit *up ;
struct refclockproc *pp ;
struct peer *peer;
char *pBuf ;
int iLen ;
int rc ;
int bOverMidnight = 0 ;
char sLogText [ MAX_LOGTEXT ], sReplyText [ MAX_LOGTEXT ] ;
char *pCmd ;
int iCmdLen ;
/*
* Initialize pointers and read the timecode and timestamp
*/
peer = (struct peer *) rbufp->recv_srcclock ;
pp = peer->procptr ;
up = (struct jjyunit *) pp->unitptr ;
if ( up->linediscipline == LDISC_RAW ) {
pBuf = up->rawbuf ;
iLen = up->charcount ;
} else {
pBuf = pp->a_lastcode ;
iLen = pp->lencode ;
}
switch ( tristate_jjy01_command_sequence[up->linecount-1].commandNumber ) {
case TS_JJY01_COMMAND_NUMBER_DATE : /* YYYY/MM/DD WWW */
if ( iLen != TS_JJY01_REPLY_LENGTH_DATE ) {
up->lineerror = 1 ;
break ;
}
rc = sscanf ( pBuf, "%4d/%2d/%2d", &up->year,
&up->month, &up->day ) ;
if ( rc != 3 || up->year < 2000 || up->month < 1 ||
up->month > 12 || up->day < 1 || up->day > 31 ) {
up->lineerror = 1 ;
break ;
}
/*** Start of modification on 2004/10/31 ***/
/*
* Following codes are moved from the function jjy_poll_tristate_jjy01 in this source.
* The Tristate JJY-01 ( Firmware version 1.01 ) accepts "time" and "stim" commands without any delay.
* But the JJY-01 ( Firmware version 2.01 ) does not accept these commands continuously,
* so this driver issues the second command "stim" after the reply of the first command "date".
*/
/*** 2010/11/20 ***/
/*
* Codes of a next command issue are moved to the end of this function.
*/
/*** End of modification ***/
break ;
case TS_JJY01_COMMAND_NUMBER_TIME : /* HH:MM:SS */
case TS_JJY01_COMMAND_NUMBER_STIM : /* HH:MM:SS */
if ( iLen != TS_JJY01_REPLY_LENGTH_STIM ) {
up->lineerror = 1 ;
break ;
}
rc = sscanf ( pBuf, "%2d:%2d:%2d", &up->hour,
&up->minute, &up->second ) ;
if ( rc != 3 || up->hour > 23 || up->minute > 59 ||
up->second > 60 ) {
up->lineerror = 1 ;
break ;
}
up->msecond = 0 ;
if ( up->hour == 0 && up->minute == 0 &&
up->second <= 2 ) {
/*
* The command "date" and "time" ( or "stim" ) were sent to the JJY receiver separately,
* and the JJY receiver replies a date and time separately.
* Just after midnight transitions, we ignore this time.
*/
bOverMidnight = 1 ;
}
break ;
case TS_JJY01_COMMAND_NUMBER_STUS :
if ( ( iLen == TS_JJY01_REPLY_LENGTH_STUS_YES
&& strncmp( pBuf, TS_JJY01_REPLY_STUS_YES,
TS_JJY01_REPLY_LENGTH_STUS_YES ) == 0 )
|| ( iLen == TS_JJY01_REPLY_LENGTH_STUS_NO
&& strncmp( pBuf, TS_JJY01_REPLY_STUS_NO,
TS_JJY01_REPLY_LENGTH_STUS_NO ) == 0 ) ) {
/* Good */
} else {
up->lineerror = 1 ;
break ;
}
break ;
case TS_JJY01_COMMAND_NUMBER_DCST :
if ( ( iLen == TS_JJY01_REPLY_LENGTH_DCST_VALID
&& strncmp( pBuf, TS_JJY01_REPLY_DCST_VALID,
TS_JJY01_REPLY_LENGTH_DCST_VALID ) == 0 )
|| ( iLen == TS_JJY01_REPLY_LENGTH_DCST_INVALID
&& strncmp( pBuf, TS_JJY01_REPLY_DCST_INVALID,
TS_JJY01_REPLY_LENGTH_DCST_INVALID ) == 0 ) ) {
/* Good */
} else {
up->lineerror = 1 ;
break ;
}
break ;
default : /* Unexpected reply */
up->lineerror = 1 ;
break ;
}
/* Clockstats Log */
printableString( sReplyText, sizeof(sReplyText), pBuf, iLen ) ;
snprintf ( sLogText, sizeof(sLogText), "%d: %s -> %c: %s",
up->linecount,
tristate_jjy01_command_sequence[up->linecount-1].commandLog,
( up->lineerror == 0 )
? ( ( bOverMidnight == 0 )
? 'O'
: 'S' )
: 'X',
sReplyText ) ;
record_clock_stats ( &peer->srcadr, sLogText ) ;
/* Check before issue next command */
if ( up->lineerror != 0 ) {
/* Do not issue next command */
return 0 ;
}
if ( bOverMidnight != 0 ) {
/* Do not issue next command */
return 0 ;
}
if ( tristate_jjy01_command_sequence[up->linecount].command == NULL ) {
/* Command sequence completed */
return 1 ;
}
/* Issue next command */
#ifdef DEBUG
if ( debug ) {
printf ( "%s (refclock_jjy.c) : send '%s'\n",
sFunctionName, tristate_jjy01_command_sequence[up->linecount].commandLog ) ;
}
#endif
pCmd = tristate_jjy01_command_sequence[up->linecount].command ;
iCmdLen = tristate_jjy01_command_sequence[up->linecount].commandLength ;
if ( write ( pp->io.fd, pCmd, iCmdLen ) != iCmdLen ) {
refclock_report ( peer, CEVNT_FAULT ) ;
}
return 0 ;
}
/**************************************************************************************************/
static int
jjy_receive_cdex_jst2000 ( struct recvbuf *rbufp )
{
static char *sFunctionName = "jjy_receive_cdex_jst2000" ;
struct jjyunit *up ;
struct refclockproc *pp ;
struct peer *peer;
char *pBuf ;
int iLen ;
int rc ;
/*
* Initialize pointers and read the timecode and timestamp
*/
peer = (struct peer *) rbufp->recv_srcclock ;
pp = peer->procptr ;
up = (struct jjyunit *) pp->unitptr ;
if ( up->linediscipline == LDISC_RAW ) {
pBuf = up->rawbuf ;
iLen = up->charcount ;
} else {
pBuf = pp->a_lastcode ;
iLen = pp->lencode ;
}
switch ( up->linecount ) {
case 1 : /* JYYMMDD HHMMSSS */
if ( iLen != 15 ) {
#ifdef DEBUG
if ( debug >= 2 ) {
printf ( "%s (refclock_jjy.c) : Reply length error ( iLen=%d )\n",
sFunctionName, iLen ) ;
}
#endif
up->lineerror = 1 ;
break ;
}
rc = sscanf ( pBuf, "J%2d%2d%2d%*1d%2d%2d%2d%1d",
&up->year, &up->month, &up->day,
&up->hour, &up->minute, &up->second,
&up->msecond ) ;
if ( rc != 7 || up->month < 1 || up->month > 12 ||
up->day < 1 || up->day > 31 || up->hour > 23 ||
up->minute > 59 || up->second > 60 ) {
#ifdef DEBUG
if ( debug >= 2 ) {
printf ( "%s (refclock_jjy.c) : Time error (rc=%d) [ %02d %02d %02d * %02d %02d %02d.%1d ]\n",
sFunctionName, rc, up->year,
up->month, up->day, up->hour,
up->minute, up->second,
up->msecond ) ;
}
#endif
up->lineerror = 1 ;
break ;
}
up->year += 2000 ;
up->msecond *= 100 ;
break ;
default : /* Unexpected reply */
up->lineerror = 1 ;
break ;
}
return 1 ;
}
/**************************************************************************************************/
static int
jjy_receive_echokeisokuki_lt2000 ( struct recvbuf *rbufp )
{
static char *sFunctionName = "jjy_receive_echokeisokuki_lt2000" ;
struct jjyunit *up ;
struct refclockproc *pp ;
struct peer *peer;
char *pBuf ;
int iLen ;
int rc ;
int i, ibcc, ibcc1, ibcc2 ;
/*
* Initialize pointers and read the timecode and timestamp
*/
peer = (struct peer *) rbufp->recv_srcclock ;
pp = peer->procptr ;
up = (struct jjyunit *) pp->unitptr ;
if ( up->linediscipline == LDISC_RAW ) {
pBuf = up->rawbuf ;
iLen = up->charcount ;
} else {
pBuf = pp->a_lastcode ;
iLen = pp->lencode ;
}
switch ( up->linecount ) {
case 1 : /* YYMMDDWHHMMSS<BCC1><BCC2> or YYMMDDWHHMMSS<ST1><ST2><ST3><ST4> */
if ( ( up->operationmode == 1 && iLen != 15 ) ||
( up->operationmode == 2 && iLen != 17 ) ) {
#ifdef DEBUG
if ( debug >= 2 ) {
printf ( "%s (refclock_jjy.c) : Reply length error ( iLen=%d )\n",
sFunctionName, iLen ) ;
}
#endif
if ( up->operationmode == 1 ) {
#ifdef DEBUG
if ( debug ) {
printf ( "%s (refclock_jjy.c) : send '#'\n", sFunctionName ) ;
}
#endif
if ( write ( pp->io.fd, "#",1 ) != 1 ) {
refclock_report ( peer, CEVNT_FAULT ) ;
}
}
up->lineerror = 1 ;
break ;
}
if ( up->operationmode == 1 ) {
for ( i = ibcc = 0 ; i < 13 ; i ++ )
ibcc ^= pBuf[i] ;
ibcc1 = 0x30 | ( ( ibcc >> 4 ) & 0xF ) ;
ibcc2 = 0x30 | ( ( ibcc ) & 0xF ) ;
if ( pBuf[13] != ibcc1 || pBuf[14] != ibcc2 ) {
#ifdef DEBUG
if ( debug >= 2 ) {
printf ( "%s (refclock_jjy.c) : BCC error ( Recv=%02X,%02X / Calc=%02X,%02X)\n",
sFunctionName,
pBuf[13] & 0xFF,
pBuf[14] & 0xFF,
ibcc1, ibcc2 ) ;
}
#endif
up->lineerror = 1 ;
break ;
}
}
rc = sscanf ( pBuf, "%2d%2d%2d%*1d%2d%2d%2d",
&up->year, &up->month, &up->day,
&up->hour, &up->minute, &up->second ) ;
if ( rc != 6 || up->month < 1 || up->month > 12 ||
up->day < 1 || up->day > 31 || up->hour > 23 ||
up->minute > 59 || up->second > 60 ) {
#ifdef DEBUG
if ( debug >= 2 ) {
printf ( "%s (refclock_jjy.c) : Time error (rc=%d) [ %02d %02d %02d * %02d %02d %02d ]\n",
sFunctionName, rc, up->year,
up->month, up->day, up->hour,
up->minute, up->second ) ;
}
#endif
up->lineerror = 1 ;
break ;
}
up->year += 2000 ;
if ( up->operationmode == 2 ) {
/* A time stamp comes on every 0.5 seccond in the mode 2 of the LT-2000. */
up->msecond = 500 ;
pp->second -- ;
if ( pp->second < 0 ) {
pp->second = 59 ;
pp->minute -- ;
if ( pp->minute < 0 ) {
pp->minute = 59 ;
pp->hour -- ;
if ( pp->hour < 0 ) {
pp->hour = 23 ;
pp->day -- ;
if ( pp->day < 1 ) {
pp->year -- ;
pp->day = ymd2yd ( pp->year, 12, 31 ) ;
}
}
}
}
/* Switch from mode 2 to mode 1 in order to restraint of useless time stamp. */
#ifdef DEBUG
if ( debug ) {
printf ( "%s (refclock_jjy.c) : send '#'\n",
sFunctionName ) ;
}
#endif
if ( write ( pp->io.fd, "#",1 ) != 1 ) {
refclock_report ( peer, CEVNT_FAULT ) ;
}
}
break ;
default : /* Unexpected reply */
#ifdef DEBUG
if ( debug ) {
printf ( "%s (refclock_jjy.c) : send '#'\n",
sFunctionName ) ;
}
#endif
if ( write ( pp->io.fd, "#",1 ) != 1 ) {
refclock_report ( peer, CEVNT_FAULT ) ;
}
up->lineerror = 1 ;
break ;
}
return 1 ;
}
/**************************************************************************************************/
static int
jjy_receive_citizentic_jjy200 ( struct recvbuf *rbufp )
{
static char *sFunctionName = "jjy_receive_citizentic_jjy200" ;
struct jjyunit *up ;
struct refclockproc *pp ;
struct peer *peer;
char *pBuf ;
int iLen ;
int rc ;
char cApostrophe, sStatus[3] ;
int iWeekday ;
/*
* Initialize pointers and read the timecode and timestamp
*/
peer = (struct peer *) rbufp->recv_srcclock ;
pp = peer->procptr ;
up = (struct jjyunit *) pp->unitptr ;
if ( up->linediscipline == LDISC_RAW ) {
pBuf = up->rawbuf ;
iLen = up->charcount ;
} else {
pBuf = pp->a_lastcode ;
iLen = pp->lencode ;
}
/*
* JJY-200 sends a timestamp every second.
* So, a timestamp is ignored unless it is right after polled.
*/
if ( ! up->bPollFlag )
return 0 ;
switch ( up->linecount ) {
case 1 : /* 'XX YY/MM/DD W HH:MM:SS<CR> */
if ( iLen != 23 ) {
#ifdef DEBUG
if ( debug >= 2 ) {
printf ( "%s (refclock_jjy.c) : Reply length error ( iLen=%d )\n",
sFunctionName, iLen ) ;
}
#endif
up->lineerror = 1 ;
break ;
}
rc = sscanf ( pBuf, "%c%2s %2d/%2d/%2d %1d %2d:%2d:%2d",
&cApostrophe, sStatus, &up->year,
&up->month, &up->day, &iWeekday,
&up->hour, &up->minute, &up->second ) ;
sStatus[2] = 0 ;
if ( rc != 9 || cApostrophe != '\'' ||
strcmp( sStatus, "OK" ) != 0 || up->month < 1 ||
up->month > 12 || up->day < 1 || up->day > 31 ||
iWeekday > 6 || up->hour > 23 || up->minute > 59 ||
up->second > 60 ) {
#ifdef DEBUG
if ( debug >= 2 ) {
printf ( "%s (refclock_jjy.c) : Time error (rc=%d) [ %c %2s %02d %02d %02d %d %02d %02d %02d ]\n",
sFunctionName, rc, cApostrophe,
sStatus, up->year, up->month,
up->day, iWeekday, up->hour,
up->minute, up->second ) ;
}
#endif
up->lineerror = 1 ;
break ;
}
up->year += 2000 ;
up->msecond = 0 ;
break ;
default : /* Unexpected reply */
up->lineerror = 1 ;
break ;
}
return 1 ;
}
/**************************************************************************************************/
/* jjy_poll - called by the transmit procedure */
/**************************************************************************************************/
static void
jjy_poll ( int unit, struct peer *peer )
{
struct jjyunit *up;
struct refclockproc *pp;
pp = peer->procptr;
up = (struct jjyunit *) pp->unitptr ;
if ( pp->polls > 0 && up->linecount == 0 ) {
/*
* No reply for last command
*/
refclock_report ( peer, CEVNT_TIMEOUT ) ;
}
#ifdef DEBUG
if ( debug ) {
printf ( "jjy_poll (refclock_jjy.c) : %ld\n", pp->polls ) ;
}
#endif
pp->polls ++ ;
up->bPollFlag = 1 ;
up->linecount = 0 ;
up->lineerror = 0 ;
up->charcount = 0 ;
switch ( up->unittype ) {
case UNITTYPE_TRISTATE_JJY01 :
jjy_poll_tristate_jjy01 ( unit, peer ) ;
break ;
case UNITTYPE_CDEX_JST2000 :
jjy_poll_cdex_jst2000 ( unit, peer ) ;
break ;
case UNITTYPE_ECHOKEISOKUKI_LT2000 :
jjy_poll_echokeisokuki_lt2000 ( unit, peer ) ;
break ;
case UNITTYPE_CITIZENTIC_JJY200 :
jjy_poll_citizentic_jjy200 ( unit, peer ) ;
break ;
default :
break ;
}
}
/**************************************************************************************************/
static void
jjy_poll_tristate_jjy01 ( int unit, struct peer *peer )
{
static char *sFunctionName = "jjy_poll_tristate_jjy01" ;
struct jjyunit *up;
struct refclockproc *pp;
char *pCmd ;
int iCmdLen ;
pp = peer->procptr;
up = (struct jjyunit *) pp->unitptr ;
if ( ( pp->sloppyclockflag & CLK_FLAG1 ) == 0 ) {
up->linecount = 2 ;
}
#ifdef DEBUG
if ( debug ) {
printf ( "%s (refclock_jjy.c) : flag1=%X CLK_FLAG1=%X up->linecount=%d\n",
sFunctionName, pp->sloppyclockflag, CLK_FLAG1,
up->linecount ) ;
}
#endif
/*
* Send a first command
*/
#ifdef DEBUG
if ( debug ) {
printf ( "%s (refclock_jjy.c) : send '%s'\n",
sFunctionName,
tristate_jjy01_command_sequence[up->linecount].commandLog ) ;
}
#endif
pCmd = tristate_jjy01_command_sequence[up->linecount].command ;
iCmdLen = tristate_jjy01_command_sequence[up->linecount].commandLength ;
if ( write ( pp->io.fd, pCmd, iCmdLen ) != iCmdLen ) {
refclock_report ( peer, CEVNT_FAULT ) ;
}
}
/**************************************************************************************************/
static void
jjy_poll_cdex_jst2000 ( int unit, struct peer *peer )
{
struct refclockproc *pp;
pp = peer->procptr;
/*
* Send "<ENQ>1J<ETX>" command
*/
#ifdef DEBUG
if ( debug ) {
printf ( "jjy_poll_cdex_jst2000 (refclock_jjy.c) : send '<ENQ>1J<ETX>'\n" ) ;
}
#endif
if ( write ( pp->io.fd, "\0051J\003", 4 ) != 4 ) {
refclock_report ( peer, CEVNT_FAULT ) ;
}
}
/**************************************************************************************************/
static void
jjy_poll_echokeisokuki_lt2000 ( int unit, struct peer *peer )
{
struct jjyunit *up;
struct refclockproc *pp;
char sCmd[2] ;
pp = peer->procptr;
up = (struct jjyunit *) pp->unitptr ;
/*
* Send "T" or "C" command
*/
switch ( up->operationmode ) {
case 1 : sCmd[0] = 'T' ; break ;
case 2 : sCmd[0] = 'C' ; break ;
}
sCmd[1] = 0 ;
#ifdef DEBUG
if ( debug ) {
printf ( "jjy_poll_echokeisokuki_lt2000 (refclock_jjy.c) : send '%s'\n", sCmd ) ;
}
#endif
if ( write ( pp->io.fd, sCmd, 1 ) != 1 ) {
refclock_report ( peer, CEVNT_FAULT ) ;
}
}
/**************************************************************************************************/
static void
jjy_poll_citizentic_jjy200 ( int unit, struct peer *peer )
{
/* Do nothing ( up->bPollFlag is set by the jjy_poll ) */
}
/**************************************************************************************************/
static void
printableString ( char *sOutput, int iOutputLen, char *sInput, int iInputLen )
{
char *printableControlChar[] = {
"<NUL>", "<SOH>", "<STX>", "<ETX>",
"<EOT>", "<ENQ>", "<ACK>", "<BEL>",
"<BS>" , "<HT>" , "<LF>" , "<VT>" ,
"<FF>" , "<CR>" , "<SO>" , "<SI>" ,
"<DLE>", "<DC1>", "<DC2>", "<DC3>",
"<DC4>", "<NAK>", "<SYN>", "<ETB>",
"<CAN>", "<EM>" , "<SUB>", "<ESC>",
"<FS>" , "<GS>" , "<RS>" , "<US>" ,
" " } ;
int i, j, n ;
for ( i = j = 0 ; i < iInputLen && j < iOutputLen ; i ++ ) {
if ( isprint( sInput[i] ) ) {
n = 1 ;
if ( j + 1 >= iOutputLen )
break ;
sOutput[j] = sInput[i] ;
} else if ( ( sInput[i] & 0xFF ) <
COUNTOF(printableControlChar) ) {
n = strlen( printableControlChar[sInput[i] & 0xFF] ) ;
if ( j + n + 1 >= iOutputLen )
break ;
strncpy( sOutput + j,
printableControlChar[sInput[i] & 0xFF],
(size_t)iOutputLen - j ) ;
} else {
n = 5 ;
if ( j + n + 1 >= iOutputLen ) break ;
snprintf( sOutput + j, (size_t)iOutputLen - j,
"<x%X>", sInput[i] & 0xFF ) ;
}
j += n ;
}
sOutput[min(j, iOutputLen - 1)] = '\0' ;
}
/**************************************************************************************************/
#else
int refclock_jjy_bs ;
#endif /* REFCLOCK */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>