Return to ntpdc.1 CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / ntpdc

Annotation of embedaddon/ntp/ntpdc/ntpdc.1, revision 1.1

1.1     ! misho       1: .TH NTPDC 1 2011-12-24 "( 4.2.6p5)" "Programmer's Manual"
        !             2: .\"  EDIT THIS FILE WITH CAUTION  (ntpdc.1)
        !             3: .\"  
        !             4: .\"  It has been AutoGen-ed  December 24, 2011 at 06:34:25 PM by AutoGen 5.12
        !             5: .\"  From the definitions    ntpdc-opts.def
        !             6: .\"  and the template file   agman1.tpl
        !             7: .\"
        !             8: .SH NAME
        !             9: ntpdc \- vendor-specific NTP query program
        !            10: .SH SYNOPSIS
        !            11: .B ntpdc
        !            12: .\" Mixture of short (flag) options and long options
        !            13: .RB [ \-\fIflag\fP " [\fIvalue\fP]]... [" \--\fIopt-name\fP " [[=| ]\fIvalue\fP]]..."
        !            14: .br
        !            15: .in +8
        !            16: [ host ...]
        !            17: .SH "DESCRIPTION"
        !            18: This manual page briefly documents the \fBntpdc\fP command.
        !            19: The
        !            20: [= prog-name =]
        !            21: utility program is used to query an NTP daemon about its
        !            22: current state and to request changes in that state.
        !            23: It uses NTP mode 7 control message formats described in the source code.
        !            24: The program may
        !            25: be run either in interactive mode or controlled using command line
        !            26: arguments.
        !            27: Extensive state and statistics information is available
        !            28: through the
        !            29: [= prog-name =]
        !            30: interface.
        !            31: In addition, nearly all the
        !            32: configuration options which can be specified at startup using
        !            33: ntpd's configuration file may also be specified at run time using
        !            34: [= prog-name =] .
        !            35: 
        !            36: 
        !            37: .SH OPTIONS
        !            38: .TP
        !            39: .BR \-4 ", " \--ipv4
        !            40: Force IPv4 DNS name resolution.
        !            41: This option must not appear in combination with any of the following options:
        !            42: ipv6.
        !            43: .sp
        !            44: Force DNS resolution of following host names on the command line
        !            45: to the IPv4 namespace.
        !            46: .TP
        !            47: .BR \-6 ", " \--ipv6
        !            48: Force IPv6 DNS name resolution.
        !            49: This option must not appear in combination with any of the following options:
        !            50: ipv4.
        !            51: .sp
        !            52: Force DNS resolution of following host names on the command line
        !            53: to the IPv6 namespace.
        !            54: .TP
        !            55: .BR \-c " \fIcmd\fP, " \--command "=" \fIcmd\fP
        !            56: run a command and exit.
        !            57: This option may appear an unlimited number of times.
        !            58: .sp
        !            59: The following argument is interpreted as an interactive format command
        !            60: and is added to the list of commands to be executed on the specified
        !            61: host(s).
        !            62: .TP
        !            63: .BR \-l ", " \--listpeers
        !            64: Print a list of the peers.
        !            65: This option must not appear in combination with any of the following options:
        !            66: command.
        !            67: .sp
        !            68: Print a list of the peers known to the server as well as a summary of
        !            69: their state. This is equivalent to the 'listpeers' interactive command.
        !            70: .TP
        !            71: .BR \-p ", " \--peers
        !            72: Print a list of the peers.
        !            73: This option must not appear in combination with any of the following options:
        !            74: command.
        !            75: .sp
        !            76: Print a list of the peers known to the server as well as a summary
        !            77: of their state. This is equivalent to the 'peers' interactive command.
        !            78: .TP
        !            79: .BR \-s ", " \--showpeers
        !            80: Show a list of the peers.
        !            81: This option must not appear in combination with any of the following options:
        !            82: command.
        !            83: .sp
        !            84: Print a list of the peers known to the server as well as a summary
        !            85: of their state. This is equivalent to the 'dmpeers' interactive command.
        !            86: .TP
        !            87: .BR \-i ", " \--interactive
        !            88: Force ntpq to operate in interactive mode.
        !            89: This option must not appear in combination with any of the following options:
        !            90: command, listpeers, peers, showpeers.
        !            91: .sp
        !            92: Force ntpq to operate in interactive mode.  Prompts will be written
        !            93: to the standard output and commands read from the standard input.
        !            94: .TP
        !            95: .BR \-d ", " \--debug-level
        !            96: Increase output debug message level.
        !            97: This option may appear an unlimited number of times.
        !            98: .sp
        !            99: Increase the debugging message output level.
        !           100: .TP
        !           101: .BR \-D " \fIstring\fP, " \--set-debug-level "=" \fIstring\fP
        !           102: Set the output debug message level.
        !           103: This option may appear an unlimited number of times.
        !           104: .sp
        !           105: Set the output debugging level.  Can be supplied multiple times,
        !           106: but each overrides the previous value(s).
        !           107: .TP
        !           108: .BR \-n ", " \--numeric
        !           109: numeric host addresses.
        !           110: .sp
        !           111: Output all host addresses in dotted-quad numeric format rather than
        !           112: converting to the canonical host names. 
        !           113: .TP
        !           114: .BR \-? , " \--help"
        !           115: Display extended usage information and exit.
        !           116: .TP
        !           117: .BR \-! , " \--more-help"
        !           118: Extended usage information passed thru pager.
        !           119: .TP
        !           120: .BR \-> " [\fIrcfile\fP]," " \--save-opts" "[=\fIrcfile\fP]"
        !           121: Save the option state to \fIrcfile\fP.  The default is the \fIlast\fP
        !           122: configuration file listed in the \fBOPTION PRESETS\fP section, below.
        !           123: .TP
        !           124: .BR \-< " \fIrcfile\fP," " \--load-opts" "=\fIrcfile\fP," " \--no-load-opts"
        !           125: Load options from \fIrcfile\fP.
        !           126: The \fIno-load-opts\fP form will disable the loading
        !           127: of earlier RC/INI files.  \fI--no-load-opts\fP is handled early,
        !           128: out of order.
        !           129: .TP
        !           130: .BR \- " [{\fIv|c|n\fP}]," " \--version" "[=\fI{v|c|n}\fP]"
        !           131: Output version of program and exit.  The default mode is `v', a simple
        !           132: version.  The `c' mode will print copyright information and `n' will
        !           133: print the full copyright notice.
        !           134: .SH OPTION PRESETS
        !           135: Any option that is not marked as \fInot presettable\fP may be preset
        !           136: by loading values from configuration ("RC" or ".INI") file(s) and values from
        !           137: environment variables named:
        !           138: .nf
        !           139:   \fBNTPDC_<option-name>\fP or \fBNTPDC\fP
        !           140: .fi
        !           141: .ad
        !           142: The environmental presets take precedence (are processed later than)
        !           143: the configuration files.
        !           144: The \fIhomerc\fP files are "\fI$HOME\fP", and "\fI.\fP".
        !           145: If any of these are directories, then the file \fI.ntprc\fP
        !           146: is searched for within those directories.
        !           147: .SH AUTHOR
        !           148: David L. Mills and/or others
        !           149: .br
        !           150: Please send bug reports to:  http://bugs.ntp.org, bugs@ntp.org
        !           151: 
        !           152: .PP
        !           153: .nf
        !           154: .na
        !           155: see html/copyright.html
        !           156: 
        !           157: .fi
        !           158: .ad
        !           159: .PP
        !           160: This manual page was \fIAutoGen\fP-erated from the \fBntpdc\fP
        !           161: option definitions.