Annotation of embedaddon/ntp/scripts/stats/README.stats, revision 1.1.1.1
1.1 misho 1: Statistics file formats (README.stats)
2:
3: The xntp3 daemon can produce a variety of statistics files which are
4: useful for maintenance, evaluation and retrospective calibration
5: purposes. See the xntpd.8 man page for instructions on how to configure
6: this feature. Since these files can become rather large and cumbersome,
7: they are ordinarily reduced to summary form by running the summary.sh
8: shell script once per day, week or month, as appropriate. There are
9: three file collections presently defined: peerstats, loopstats and
10: clockstats, each of which is described in this note.
11:
12: peerstats
13:
14: The following data are collected in the peerstats files. The files are
15: reduced to summary data using the peer.sh shell script. See the peer.awk
16: script for further information. A line in the file is produced upon
17: reception of each valid update from a configured peer.
18:
19: 49236 30.756 140.173.96.1 9474 0.000603 0.37532
20:
21: 49236 modified Julian day number
22: 30.756 time of day (s) past midnight UTC
23: 140.173.96.1 peer identifier (IP address or receiver identifier)
24: 9474 peer status word (hex) (see NTP specification)
25: 0.000603 offset (s)
26: 0.08929 delay (s)
27: 0.37532 dispersion (s)
28:
29: loopstats
30:
31: The following data are collected in the loopstats files. The files are
32: reduced to summary data using the loop.sh shell script. See the loop.awk
33: script for further information. A line in the file is produced at each
34: valid update of the local clock.
35:
36: 49236 11.897 -0.000004 -35.9384 0
37:
38: 49236 modified Julian day number
39: 11.897 time of day (s) past midnight UTC
40: -0.000004 time offset (s)
41: -35.9384 frequency offset (ppm)
42: 0 phase-lock loop time constant
43:
44: clockstats
45:
46: The following data are collected in the clockstats files. The files are
47: reduced to summary data using the clock.sh shell script, which also
48: updates the ensemble, etf, itf and tdata data files as well. See the
49: clock.awk, ensemble.awk, etf.awk, itf.awk and tdta.awk scripts for
50: further information. A line in the file is produced at each valid update
51: received from a configured radio clock. Data are at present recorded for
52: several radios. The first part of each data line is similar for all
53: radios, e.g.:
54:
55: 49234 60517.826 127.127.4.1 93 247 16:48:21.814
56:
57: 49234 modified Julian day number
58: 60517.826 time of day (s) past midnight UTC
59: 127.127.4.1 receiver identifier (Spectracom 8170/Netclock-2)
60: 93 247 16:48:21.814 timecode (format varies)
61:
62: In the case of the Austron GPS receiver, a good deal of additional
63: information is extracted from the radio, as described below. The formats
64: shown consist of one line with all the fields shown in order. The
65: timecode formats specific to each radio follow. See the file
66: README.timecodes for detailed information on the timecode formats used
67: by these radios.
68:
69: Spectracom 8170/Netclock-2 WWVB receiver
70:
71: 49234 60517.826 127.127.4.1 ?A93 247 16:48:21.814
72:
73: The '?' and 'A' characters are present only when the receiver is
74: unsynchronized; otherwise, they are replaced by space ' ' characters.
75:
76: IRIG audio decoder
77:
78: 49234 60517.826 127.127.6.0 247 16:48:21?
79:
80: The '?' character is present only when the receiver is unsynchronized.
81:
82: Austron 2200A/2201A GPS receiver
83:
84: 49234 60580.843 127.127.10.1 93:247:16:49:24.814?
85:
86: The '?' character is present only when the receiver is unsynchronized.
87:
88: Depending on the installed options, the Austron 2200A/2201A recognizes a
89: number of special commands that report various data items. See the
90: refclock_as2201.c source module for a list of the commands used. These
91: data are collected only if the following line is included in the
92: configuration file ntp.conf:
93:
94: fudge 127.127.10.1 flag4 1 # enable extended statistics collection
95:
96: The format of each data line returned is summarized in the following
97: list.
98:
99: External time/frequency data (requires input buffer option IN)
100:
101: These data determine the deviations of external time/frequency inputs
102: relative to receiver oscillator time. The following data are typical
103: using an external cesium oscillator PPS and 5-MHz outputs.
104:
105: 49234 60580.843 127.127.10.1 93:247:16:49:24.814 ETF
106:
107: -85.9 time interval (ns)
108: -89.0 average time interval (ns)
109: 4.0 time interval sigma (ns)
110: +1.510E-11 time interval rate
111: -4.500E-11 deltaf/f
112: +1.592E-11 average deltaf/f
113: 5.297E-13 sigma deltaf/f
114: 500 number of samples
115:
116: Model and option identifiers
117:
118: These data show the receiver model number and option configuration.
119:
120: 49234 60708.848 127.127.10.1 93:247:16:51:32.817 ID;OPT;VER
121:
122: GPS 2201A model ident (must be "GPS 2200A" or "GPS 2201A")
123: TTY1 rs232 option present (required)
124: TC1 IRIG option present (optional)
125: LORAN LORAN assist option present (optional)
126: IN input buffer option present (optional)
127: OUT1 output buffer option present (required)
128: B.00 data processor software version ("B.00" or later)
129: B.00 signal processor software version ("B.00" or later)
130: 28-Apr-93 software version date ("28-Apr-93" or later)
131:
132: Internal time/frequency data
133:
134: These data determine the deviations of the receiver oscillator with
135: respect to satellite time.
136:
137: 49234 60564.846 127.127.10.1 93:247:16:49:08.816 ITF
138:
139: COCO current mode (must be "COCO")
140: 0 code coast mode (must be zero)
141: +6.6152E-08 code sigma (s)
142: -3.5053E-08 code delta t (s)
143: -4.0361E-11 deltat/t
144: -6.4746E-11 oscillator ageing rate
145: 500.00 loop time constant
146: 4.984072 electrical tuning (V)
147:
148: GPS/LORAN ensemble data (requires LORAN assist option LORAN)
149:
150: These data determine the deviations and weights to calculate ensemble
151: time from GPS and LORAN data.
152:
153: 49234 60596.852 127.127.10.1 93:247:16:49:40.812 LORAN ENSEMBLE
154:
155: +9.06E-08 GPS t (s)
156: +3.53E-08 GPS sigma (s)
157: .532 GPS weight
158: +3.71E-08 LORAN t (s)
159: +3.76E-08 LORAN sigma (s)
160: .468 LORAN weight
161: +6.56E-08 ensemble t
162: +6.94E-08 ensemble sigma (s)
163:
164: LORAN stationkeeping data (requires LORAN assist option LORAN)
165:
166: These data determine which stations of the LORAN chain are being
167: tracked, together with individual signal/noise ratios, deviations and
168: weights.
169:
170: 49234 60532.850 127.127.10.1 93:247:16:48:36.820 LORAN TDATA
171:
172: M station identifier; data follows
173: OK status (must be "OK" for tracking)
174: 0 cw flag
175: 0 sw flag
176: 1162.17 time of arrival
177: -4.6 snr (-30.0 if not "OK" status)
178: 1.67E-07 2-sample phase-time deviation
179: .507 weight (included only if "OK" status)
180: W AQ 0 0 3387.80 -31.0 station identifier and data
181: X OK 0 0 1740.27 -11.2 2.20E-07 .294 station identifier and data
182: Y OK 0 0 2180.71 -4.6 2.68E-07 .198 station identifier and data
183: Z CV 0 0 3392.94 -30.0 station identifier and data
184:
185: Oscillator status and environment
186:
187: These data determine the receiver oscillator type, mode, status and
188: environment. Nominal operating conditions are shown below.
189:
190: 49234 60628.847 127.127.10.1 93:247:16:50:12.817 OSC;ET;TEMP
191:
192: 1121 Software Control oscillator model and mode (must be
193: "Software Control")
194: Locked status (must be "Locked")
195: 4.979905 electrical tuning (V)
196: 44.81 oscillator cavity temperature
197:
198: Receiver position, status and offsets
199:
200: These data determine the receiver position and elevation, together with
201: programmable delay corrections for the antenna cable and receiver.
202:
203: 49234 60788.847 127.127.10.1 93:247:16:52:52.817 POS;PPS;PPSOFF
204:
205: +39:40:48.425 receiver latitude (N)
206: -075:45:02.392 receiver longitude (E)
207: +74.09 receiver elevation (m)
208: Stored position status (must be "Stored")
209: UTC PPS/PPM alignment (must be "UTC")
210: 0 receiver delay (ns) (should be zero for calibrated
211: receiver)
212: 200 cable delay (ns)
213: 0 user time bias (ns) (must be zero)
214:
215: Satellite tracking status
216:
217: These data determine how many satellites are being tracked. At the
218: present state of constellation development, there should be at least
219: three visible satellites in view. Much of the time the maximum of
220: seven are being tracked; rarely this number drops to two.
221:
222: 49234 60612.850 127.127.10.1 93:247:16:49:56.820 TRSTAT
223:
224: 24 T satellite prn and status (T = track, A = acquire)
225: 16 A 13 T 20 T 18 T 07 T 12 T list continued
226:
227: UTC leap-second information
228:
229: These data determine when the next leap second is to occur. The exact
230: method to use is obscure.
231:
232: 49234 60548.847 127.127.10.1 93:247:16:48:52.818 UTC
233:
234: -1.2107E-08 A0 term (s)
235: -1.2790E-13 A1 term (s)
236: +9.0000E+00 current leap seconds (s)
237: +2.0480E+05 time for leap seconds (s)
238: +2.0100E+02 week number for delta leap (weeks)
239: +1.9100E+02 week number for future leap (weeks)
240: +4.0000E+00 day number for future leap (days)
241: +9.0000E+00 future leap seconds (s)
242:
243: David L. Mills
244: University of Delaware
245: mills@udel.edu
246: 23 October 1993
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to README.stats CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / scripts / stats