1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5: # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6: # Inc.
7: # This Makefile.in is free software; the Free Software Foundation
8: # gives unlimited permission to copy and/or distribute it,
9: # with or without modifications, as long as this notice is preserved.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14: # PARTICULAR PURPOSE.
15:
16: @SET_MAKE@
17:
18: # Makefile.am for JMK's SNTP, by Harlan Stenn
19:
20: # we traditionally installed software in bindir, while it should have gone
21: # in sbindir. Now that we offer a choice, look in the "other" installation
22: # subdir to warn folks if there is another version there.
23:
24:
25: VPATH = @srcdir@
26: pkgdatadir = $(datadir)/@PACKAGE@
27: pkgincludedir = $(includedir)/@PACKAGE@
28: pkglibdir = $(libdir)/@PACKAGE@
29: pkglibexecdir = $(libexecdir)/@PACKAGE@
30: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
31: install_sh_DATA = $(install_sh) -c -m 644
32: install_sh_PROGRAM = $(install_sh) -c
33: install_sh_SCRIPT = $(install_sh) -c
34: INSTALL_HEADER = $(INSTALL_DATA)
35: transform = $(program_transform_name)
36: NORMAL_INSTALL = :
37: PRE_INSTALL = :
38: POST_INSTALL = :
39: NORMAL_UNINSTALL = :
40: PRE_UNINSTALL = :
41: POST_UNINSTALL = :
42: build_triplet = @build@
43: host_triplet = @host@
44: @NTP_BINSUBDIR_IS_BIN_TRUE@bin_PROGRAMS = sntp$(EXEEXT)
45: @NTP_BINSUBDIR_IS_BIN_FALSE@sbin_PROGRAMS = sntp$(EXEEXT)
46: @NEED_LIBOPTS_TRUE@am__append_1 = libopts
47: DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
48: $(srcdir)/Makefile.in $(srcdir)/config.h.in \
49: $(top_srcdir)/bincheck.mf $(top_srcdir)/configure \
50: $(top_srcdir)/depsver.mf compile config.guess config.sub \
51: depcomp install-sh ltmain.sh missing
52: subdir = .
53: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
54: am__aclocal_m4_deps = $(top_srcdir)/libopts/m4/libopts.m4 \
55: $(top_srcdir)/../m4/libtool.m4 \
56: $(top_srcdir)/../m4/ltoptions.m4 \
57: $(top_srcdir)/../m4/ltsugar.m4 \
58: $(top_srcdir)/../m4/ltversion.m4 \
59: $(top_srcdir)/../m4/lt~obsolete.m4 \
60: $(top_srcdir)/../m4/ntp_cacheversion.m4 \
61: $(top_srcdir)/../m4/ntp_dir_sep.m4 \
62: $(top_srcdir)/../m4/ntp_lib_m.m4 \
63: $(top_srcdir)/../m4/ntp_openssl.m4 $(top_srcdir)/../version.m4 \
64: $(top_srcdir)/configure.ac
65: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
66: $(ACLOCAL_M4)
67: am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
68: configure.lineno config.status.lineno
69: mkinstalldirs = $(install_sh) -d
70: CONFIG_HEADER = config.h
71: CONFIG_CLEAN_FILES =
72: CONFIG_CLEAN_VPATH_FILES =
73: am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" \
74: "$(DESTDIR)$(man1dir)"
75: PROGRAMS = $(bin_PROGRAMS) $(sbin_PROGRAMS)
76: am__objects_1 =
77: am_sntp_OBJECTS = crypto.$(OBJEXT) kod_management.$(OBJEXT) \
78: log.$(OBJEXT) main.$(OBJEXT) networking.$(OBJEXT) \
79: sntp.$(OBJEXT) sntp-opts.$(OBJEXT) utilities.$(OBJEXT) \
80: $(am__objects_1)
81: sntp_OBJECTS = $(am_sntp_OBJECTS)
82: sntp_LDADD = $(LDADD)
83: am__DEPENDENCIES_1 =
84: sntp_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
85: ../libntp/libntp.a
86: DEFAULT_INCLUDES = -I.@am__isrc@
87: depcomp = $(SHELL) $(top_srcdir)/depcomp
88: am__depfiles_maybe = depfiles
89: am__mv = mv -f
90: COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
91: $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
92: LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
93: --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
94: $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
95: CCLD = $(CC)
96: LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
97: --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
98: $(LDFLAGS) -o $@
99: SOURCES = $(sntp_SOURCES)
100: DIST_SOURCES = $(sntp_SOURCES)
101: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
102: html-recursive info-recursive install-data-recursive \
103: install-dvi-recursive install-exec-recursive \
104: install-html-recursive install-info-recursive \
105: install-pdf-recursive install-ps-recursive install-recursive \
106: installcheck-recursive installdirs-recursive pdf-recursive \
107: ps-recursive uninstall-recursive
108: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
109: am__vpath_adj = case $$p in \
110: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
111: *) f=$$p;; \
112: esac;
113: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
114: am__install_max = 40
115: am__nobase_strip_setup = \
116: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
117: am__nobase_strip = \
118: for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
119: am__nobase_list = $(am__nobase_strip_setup); \
120: for p in $$list; do echo "$$p $$p"; done | \
121: sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
122: $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
123: if (++n[$$2] == $(am__install_max)) \
124: { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
125: END { for (dir in files) print dir, files[dir] }'
126: am__base_list = \
127: sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
128: sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
129: man1dir = $(mandir)/man1
130: NROFF = nroff
131: MANS = $(man_MANS)
132: DATA = $(noinst_DATA)
133: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
134: distclean-recursive maintainer-clean-recursive
135: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
136: $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
137: distdir dist dist-all distcheck
138: ETAGS = etags
139: CTAGS = ctags
140: DIST_SUBDIRS = libopts
141: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
142: distdir = $(PACKAGE)-$(VERSION)
143: top_distdir = $(distdir)
144: am__remove_distdir = \
145: { test ! -d "$(distdir)" \
146: || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
147: && rm -fr "$(distdir)"; }; }
148: am__relativize = \
149: dir0=`pwd`; \
150: sed_first='s,^\([^/]*\)/.*$$,\1,'; \
151: sed_rest='s,^[^/]*/*,,'; \
152: sed_last='s,^.*/\([^/]*\)$$,\1,'; \
153: sed_butlast='s,/*[^/]*$$,,'; \
154: while test -n "$$dir1"; do \
155: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
156: if test "$$first" != "."; then \
157: if test "$$first" = ".."; then \
158: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
159: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
160: else \
161: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
162: if test "$$first2" = "$$first"; then \
163: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
164: else \
165: dir2="../$$dir2"; \
166: fi; \
167: dir0="$$dir0"/"$$first"; \
168: fi; \
169: fi; \
170: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
171: done; \
172: reldir="$$dir2"
173: DIST_ARCHIVES = $(distdir).tar.gz
174: GZIP_ENV = --best
175: distuninstallcheck_listfiles = find . -type f -print
176: distcleancheck_listfiles = find . -type f -print
177: ACLOCAL = @ACLOCAL@
178: AMTAR = @AMTAR@
179: AR = @AR@
180: AUTOCONF = @AUTOCONF@
181: AUTOHEADER = @AUTOHEADER@
182: AUTOMAKE = @AUTOMAKE@
183: AWK = @AWK@
184: BINSUBDIR = @BINSUBDIR@
185: CC = @CC@
186: CCDEPMODE = @CCDEPMODE@
187: CFLAGS = @CFLAGS@
188: CPP = @CPP@
189: CPPFLAGS = @CPPFLAGS@
190: CYGPATH_W = @CYGPATH_W@
191: DEFS = @DEFS@
192: DEPDIR = @DEPDIR@
193: DLLTOOL = @DLLTOOL@
194: DSYMUTIL = @DSYMUTIL@
195: DUMPBIN = @DUMPBIN@
196: ECHO_C = @ECHO_C@
197: ECHO_N = @ECHO_N@
198: ECHO_T = @ECHO_T@
199: EGREP = @EGREP@
200: EXEEXT = @EXEEXT@
201: FGREP = @FGREP@
202: GREP = @GREP@
203: HAVE_INLINE = @HAVE_INLINE@
204: INSTALL = @INSTALL@
205: INSTALL_DATA = @INSTALL_DATA@
206: INSTALL_PROGRAM = @INSTALL_PROGRAM@
207: INSTALL_SCRIPT = @INSTALL_SCRIPT@
208: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
209: LCRYPTO = @LCRYPTO@
210: LD = @LD@
211: LDFLAGS = @LDFLAGS@
212: LIBM = @LIBM@
213: LIBOBJS = @LIBOBJS@
214: LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
215: LIBOPTS_DIR = @LIBOPTS_DIR@
216: LIBOPTS_LDADD = @LIBOPTS_LDADD@
217: LIBS = @LIBS@
218: LIBTOOL = @LIBTOOL@
219: LIPO = @LIPO@
220: LN_S = @LN_S@
221: LTLIBOBJS = @LTLIBOBJS@
222: MAKEINFO = @MAKEINFO@
223: MANIFEST_TOOL = @MANIFEST_TOOL@
224: MKDIR_P = @MKDIR_P@
225: NM = @NM@
226: NMEDIT = @NMEDIT@
227: OBJDUMP = @OBJDUMP@
228: OBJEXT = @OBJEXT@
229: OPENSSL = @OPENSSL@
230: OPENSSL_INC = @OPENSSL_INC@
231: OPENSSL_LIB = @OPENSSL_LIB@
232: OTOOL = @OTOOL@
233: OTOOL64 = @OTOOL64@
234: PACKAGE = @PACKAGE@
235: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
236: PACKAGE_NAME = @PACKAGE_NAME@
237: PACKAGE_STRING = @PACKAGE_STRING@
238: PACKAGE_TARNAME = @PACKAGE_TARNAME@
239: PACKAGE_URL = @PACKAGE_URL@
240: PACKAGE_VERSION = @PACKAGE_VERSION@
241: PATH_SEPARATOR = @PATH_SEPARATOR@
242: POSIX_SHELL = @POSIX_SHELL@
243: RANLIB = @RANLIB@
244: SED = @SED@
245: SET_MAKE = @SET_MAKE@
246: SHELL = @SHELL@
247: STRIP = @STRIP@
248: VERSION = @VERSION@
249: abs_builddir = @abs_builddir@
250: abs_srcdir = @abs_srcdir@
251: abs_top_builddir = @abs_top_builddir@
252: abs_top_srcdir = @abs_top_srcdir@
253: ac_ct_AR = @ac_ct_AR@
254: ac_ct_CC = @ac_ct_CC@
255: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
256: am__include = @am__include@
257: am__leading_dot = @am__leading_dot@
258: am__quote = @am__quote@
259: am__tar = @am__tar@
260: am__untar = @am__untar@
261: bindir = @bindir@
262: build = @build@
263: build_alias = @build_alias@
264: build_cpu = @build_cpu@
265: build_os = @build_os@
266: build_vendor = @build_vendor@
267: builddir = @builddir@
268: datadir = @datadir@
269: datarootdir = @datarootdir@
270: docdir = @docdir@
271: dvidir = @dvidir@
272: exec_prefix = @exec_prefix@
273: host = @host@
274: host_alias = @host_alias@
275: host_cpu = @host_cpu@
276: host_os = @host_os@
277: host_vendor = @host_vendor@
278: htmldir = @htmldir@
279: includedir = @includedir@
280: infodir = @infodir@
281: install_sh = @install_sh@
282: libdir = @libdir@
283: libexecdir = @libexecdir@
284: localedir = @localedir@
285: localstatedir = @localstatedir@
286: mandir = @mandir@
287: mkdir_p = @mkdir_p@
288: oldincludedir = @oldincludedir@
289: pdfdir = @pdfdir@
290: prefix = @prefix@
291: program_transform_name = @program_transform_name@
292: psdir = @psdir@
293: sbindir = @sbindir@
294: sharedstatedir = @sharedstatedir@
295: srcdir = @srcdir@
296: sysconfdir = @sysconfdir@
297: target_alias = @target_alias@
298: top_build_prefix = @top_build_prefix@
299: top_builddir = @top_builddir@
300: top_srcdir = @top_srcdir@
301: NULL =
302: AUTOMAKE_OPTIONS = foreign 1.10
303: ACLOCAL_AMFLAGS = -I ../m4 -I libopts/m4
304: AM_CPPFLAGS = $(LIBOPTS_CFLAGS) -I$(top_srcdir)/../include \
305: -I$(top_srcdir)/../lib/isc/include \
306: -I$(top_srcdir)/../lib/isc/nothreads/include \
307: -I$(top_srcdir)/../lib/isc/unix/include
308:
309: LDADD = $(LIBOPTS_LDADD) $(LIBM) ../libntp/libntp.a @LCRYPTO@
310: run_ag = cd $(srcdir) && env PATH="$(abs_builddir):$(PATH)" \
311: autogen -L ../include --writable
312:
313: CLEANFILES = check-COPYRIGHT-submake .deps-ver
314: SUBDIRS = $(am__append_1)
315: sntp_SOURCES = \
316: crypto.c \
317: crypto.h \
318: data_formats.h \
319: header.h \
320: kod_management.c \
321: kod_management.h \
322: log.c \
323: log.h \
324: main.c \
325: main.h \
326: networking.c \
327: networking.h \
328: sntp.c \
329: sntp-opts.c \
330: sntp-opts.h \
331: utilities.c \
332: utilities.h \
333: $(NULL)
334:
335: EXTRA_DIST = \
336: $(srcdir)/autogen-version.def \
337: bincheck.mf \
338: $(srcdir)/COPYRIGHT \
339: deps-ver \
340: depsver.mf \
341: sntp-opts.def \
342: sntp-opts.menu \
343: sntp-opts.texi \
344: sntp.1 \
345: sntp.html \
346: sntp.texi \
347: $(srcdir)/version.def \
348: $(srcdir)/version.m4 \
349: $(srcdir)/version.texi \
350: $(NULL)
351:
352: OLD_EXTRA_DIST = \
353: autogen-version.def version.def version.m4 version.texi
354:
355: BUILT_SOURCES = check-autogen-version.def check-version.def \
356: check-version.m4 check-version.texi $(srcdir)/COPYRIGHT \
357: libtool $(srcdir)/sntp-opts.c $(srcdir)/sntp-opts.h $(NULL) \
358: .deps-ver
359: man_MANS = $(srcdir)/sntp.1
360:
361: # HMS: Real Soon Now...
362: #info_TEXINFOS= sntp.texi
363: #sntp_TEXINFOS= sntp-opts.texi
364: noinst_DATA = \
365: $(srcdir)/sntp.html \
366: $(srcdir)/sntp-opts.texi \
367: $(srcdir)/sntp-opts.menu \
368: $(NULL)
369:
370: all: $(BUILT_SOURCES) config.h
371: $(MAKE) $(AM_MAKEFLAGS) all-recursive
372:
373: .SUFFIXES:
374: .SUFFIXES: .c .lo .o .obj
375: am--refresh:
376: @:
377: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/bincheck.mf $(top_srcdir)/depsver.mf $(am__configure_deps)
378: @for dep in $?; do \
379: case '$(am__configure_deps)' in \
380: *$$dep*) \
381: echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
382: $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
383: && exit 0; \
384: exit 1;; \
385: esac; \
386: done; \
387: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
388: $(am__cd) $(top_srcdir) && \
389: $(AUTOMAKE) --foreign Makefile
390: .PRECIOUS: Makefile
391: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
392: @case '$?' in \
393: *config.status*) \
394: echo ' $(SHELL) ./config.status'; \
395: $(SHELL) ./config.status;; \
396: *) \
397: echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
398: cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
399: esac;
400:
401: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
402: $(SHELL) ./config.status --recheck
403:
404: $(top_srcdir)/configure: $(am__configure_deps)
405: $(am__cd) $(srcdir) && $(AUTOCONF)
406: $(ACLOCAL_M4): $(am__aclocal_m4_deps)
407: $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
408: $(am__aclocal_m4_deps):
409:
410: config.h: stamp-h1
411: @if test ! -f $@; then \
412: rm -f stamp-h1; \
413: $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
414: else :; fi
415:
416: stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
417: @rm -f stamp-h1
418: cd $(top_builddir) && $(SHELL) ./config.status config.h
419: $(srcdir)/config.h.in: $(am__configure_deps)
420: ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
421: rm -f stamp-h1
422: touch $@
423:
424: distclean-hdr:
425: -rm -f config.h stamp-h1
426: install-binPROGRAMS: $(bin_PROGRAMS)
427: @$(NORMAL_INSTALL)
428: test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
429: @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
430: for p in $$list; do echo "$$p $$p"; done | \
431: sed 's/$(EXEEXT)$$//' | \
432: while read p p1; do if test -f $$p || test -f $$p1; \
433: then echo "$$p"; echo "$$p"; else :; fi; \
434: done | \
435: sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
436: -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
437: sed 'N;N;N;s,\n, ,g' | \
438: $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
439: { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
440: if ($$2 == $$4) files[d] = files[d] " " $$1; \
441: else { print "f", $$3 "/" $$4, $$1; } } \
442: END { for (d in files) print "f", d, files[d] }' | \
443: while read type dir files; do \
444: if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
445: test -z "$$files" || { \
446: echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
447: $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
448: } \
449: ; done
450:
451: uninstall-binPROGRAMS:
452: @$(NORMAL_UNINSTALL)
453: @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
454: files=`for p in $$list; do echo "$$p"; done | \
455: sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
456: -e 's/$$/$(EXEEXT)/' `; \
457: test -n "$$list" || exit 0; \
458: echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
459: cd "$(DESTDIR)$(bindir)" && rm -f $$files
460:
461: clean-binPROGRAMS:
462: @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
463: echo " rm -f" $$list; \
464: rm -f $$list || exit $$?; \
465: test -n "$(EXEEXT)" || exit 0; \
466: list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
467: echo " rm -f" $$list; \
468: rm -f $$list
469: install-sbinPROGRAMS: $(sbin_PROGRAMS)
470: @$(NORMAL_INSTALL)
471: test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
472: @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
473: for p in $$list; do echo "$$p $$p"; done | \
474: sed 's/$(EXEEXT)$$//' | \
475: while read p p1; do if test -f $$p || test -f $$p1; \
476: then echo "$$p"; echo "$$p"; else :; fi; \
477: done | \
478: sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
479: -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
480: sed 'N;N;N;s,\n, ,g' | \
481: $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
482: { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
483: if ($$2 == $$4) files[d] = files[d] " " $$1; \
484: else { print "f", $$3 "/" $$4, $$1; } } \
485: END { for (d in files) print "f", d, files[d] }' | \
486: while read type dir files; do \
487: if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
488: test -z "$$files" || { \
489: echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
490: $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
491: } \
492: ; done
493:
494: uninstall-sbinPROGRAMS:
495: @$(NORMAL_UNINSTALL)
496: @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
497: files=`for p in $$list; do echo "$$p"; done | \
498: sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
499: -e 's/$$/$(EXEEXT)/' `; \
500: test -n "$$list" || exit 0; \
501: echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
502: cd "$(DESTDIR)$(sbindir)" && rm -f $$files
503:
504: clean-sbinPROGRAMS:
505: @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
506: echo " rm -f" $$list; \
507: rm -f $$list || exit $$?; \
508: test -n "$(EXEEXT)" || exit 0; \
509: list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
510: echo " rm -f" $$list; \
511: rm -f $$list
512: sntp$(EXEEXT): $(sntp_OBJECTS) $(sntp_DEPENDENCIES)
513: @rm -f sntp$(EXEEXT)
514: $(LINK) $(sntp_OBJECTS) $(sntp_LDADD) $(LIBS)
515:
516: mostlyclean-compile:
517: -rm -f *.$(OBJEXT)
518:
519: distclean-compile:
520: -rm -f *.tab.c
521:
522: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto.Po@am__quote@
523: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kod_management.Po@am__quote@
524: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/log.Po@am__quote@
525: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
526: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/networking.Po@am__quote@
527: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sntp-opts.Po@am__quote@
528: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sntp.Po@am__quote@
529: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utilities.Po@am__quote@
530:
531: .c.o:
532: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
533: @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
534: @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
535: @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
536: @am__fastdepCC_FALSE@ $(COMPILE) -c $<
537:
538: .c.obj:
539: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
540: @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
541: @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
542: @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
543: @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
544:
545: .c.lo:
546: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
547: @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
548: @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
549: @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
550: @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
551:
552: mostlyclean-libtool:
553: -rm -f *.lo
554:
555: clean-libtool:
556: -rm -rf .libs _libs
557:
558: distclean-libtool:
559: -rm -f libtool config.lt
560: install-man1: $(man_MANS)
561: @$(NORMAL_INSTALL)
562: test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
563: @list=''; test -n "$(man1dir)" || exit 0; \
564: { for i in $$list; do echo "$$i"; done; \
565: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
566: sed -n '/\.1[a-z]*$$/p'; \
567: } | while read p; do \
568: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
569: echo "$$d$$p"; echo "$$p"; \
570: done | \
571: sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
572: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
573: sed 'N;N;s,\n, ,g' | { \
574: list=; while read file base inst; do \
575: if test "$$base" = "$$inst"; then list="$$list $$file"; else \
576: echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
577: $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
578: fi; \
579: done; \
580: for i in $$list; do echo "$$i"; done | $(am__base_list) | \
581: while read files; do \
582: test -z "$$files" || { \
583: echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
584: $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
585: done; }
586:
587: uninstall-man1:
588: @$(NORMAL_UNINSTALL)
589: @list=''; test -n "$(man1dir)" || exit 0; \
590: files=`{ for i in $$list; do echo "$$i"; done; \
591: l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
592: sed -n '/\.1[a-z]*$$/p'; \
593: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
594: -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
595: test -z "$$files" || { \
596: echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
597: cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
598:
599: # This directory's subdirectories are mostly independent; you can cd
600: # into them and run `make' without going through this Makefile.
601: # To change the values of `make' variables: instead of editing Makefiles,
602: # (1) if the variable is set in `config.status', edit `config.status'
603: # (which will cause the Makefiles to be regenerated when you run `make');
604: # (2) otherwise, pass the desired values on the `make' command line.
605: $(RECURSIVE_TARGETS):
606: @fail= failcom='exit 1'; \
607: for f in x $$MAKEFLAGS; do \
608: case $$f in \
609: *=* | --[!k]*);; \
610: *k*) failcom='fail=yes';; \
611: esac; \
612: done; \
613: dot_seen=no; \
614: target=`echo $@ | sed s/-recursive//`; \
615: list='$(SUBDIRS)'; for subdir in $$list; do \
616: echo "Making $$target in $$subdir"; \
617: if test "$$subdir" = "."; then \
618: dot_seen=yes; \
619: local_target="$$target-am"; \
620: else \
621: local_target="$$target"; \
622: fi; \
623: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
624: || eval $$failcom; \
625: done; \
626: if test "$$dot_seen" = "no"; then \
627: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
628: fi; test -z "$$fail"
629:
630: $(RECURSIVE_CLEAN_TARGETS):
631: @fail= failcom='exit 1'; \
632: for f in x $$MAKEFLAGS; do \
633: case $$f in \
634: *=* | --[!k]*);; \
635: *k*) failcom='fail=yes';; \
636: esac; \
637: done; \
638: dot_seen=no; \
639: case "$@" in \
640: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
641: *) list='$(SUBDIRS)' ;; \
642: esac; \
643: rev=''; for subdir in $$list; do \
644: if test "$$subdir" = "."; then :; else \
645: rev="$$subdir $$rev"; \
646: fi; \
647: done; \
648: rev="$$rev ."; \
649: target=`echo $@ | sed s/-recursive//`; \
650: for subdir in $$rev; do \
651: echo "Making $$target in $$subdir"; \
652: if test "$$subdir" = "."; then \
653: local_target="$$target-am"; \
654: else \
655: local_target="$$target"; \
656: fi; \
657: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
658: || eval $$failcom; \
659: done && test -z "$$fail"
660: tags-recursive:
661: list='$(SUBDIRS)'; for subdir in $$list; do \
662: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
663: done
664: ctags-recursive:
665: list='$(SUBDIRS)'; for subdir in $$list; do \
666: test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
667: done
668:
669: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
670: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
671: unique=`for i in $$list; do \
672: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
673: done | \
674: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
675: END { if (nonempty) { for (i in files) print i; }; }'`; \
676: mkid -fID $$unique
677: tags: TAGS
678:
679: TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
680: $(TAGS_FILES) $(LISP)
681: set x; \
682: here=`pwd`; \
683: if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
684: include_option=--etags-include; \
685: empty_fix=.; \
686: else \
687: include_option=--include; \
688: empty_fix=; \
689: fi; \
690: list='$(SUBDIRS)'; for subdir in $$list; do \
691: if test "$$subdir" = .; then :; else \
692: test ! -f $$subdir/TAGS || \
693: set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
694: fi; \
695: done; \
696: list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
697: unique=`for i in $$list; do \
698: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
699: done | \
700: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
701: END { if (nonempty) { for (i in files) print i; }; }'`; \
702: shift; \
703: if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
704: test -n "$$unique" || unique=$$empty_fix; \
705: if test $$# -gt 0; then \
706: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
707: "$$@" $$unique; \
708: else \
709: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
710: $$unique; \
711: fi; \
712: fi
713: ctags: CTAGS
714: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
715: $(TAGS_FILES) $(LISP)
716: list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
717: unique=`for i in $$list; do \
718: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
719: done | \
720: $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
721: END { if (nonempty) { for (i in files) print i; }; }'`; \
722: test -z "$(CTAGS_ARGS)$$unique" \
723: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
724: $$unique
725:
726: GTAGS:
727: here=`$(am__cd) $(top_builddir) && pwd` \
728: && $(am__cd) $(top_srcdir) \
729: && gtags -i $(GTAGS_ARGS) "$$here"
730:
731: distclean-tags:
732: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
733:
734: distdir: $(DISTFILES)
735: @list='$(MANS)'; if test -n "$$list"; then \
736: list=`for p in $$list; do \
737: if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
738: if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
739: if test -n "$$list" && \
740: grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
741: echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
742: grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
743: echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
744: echo " typically \`make maintainer-clean' will remove them" >&2; \
745: exit 1; \
746: else :; fi; \
747: else :; fi
748: $(am__remove_distdir)
749: test -d "$(distdir)" || mkdir "$(distdir)"
750: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
751: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
752: list='$(DISTFILES)'; \
753: dist_files=`for file in $$list; do echo $$file; done | \
754: sed -e "s|^$$srcdirstrip/||;t" \
755: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
756: case $$dist_files in \
757: */*) $(MKDIR_P) `echo "$$dist_files" | \
758: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
759: sort -u` ;; \
760: esac; \
761: for file in $$dist_files; do \
762: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
763: if test -d $$d/$$file; then \
764: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
765: if test -d "$(distdir)/$$file"; then \
766: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
767: fi; \
768: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
769: cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
770: find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
771: fi; \
772: cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
773: else \
774: test -f "$(distdir)/$$file" \
775: || cp -p $$d/$$file "$(distdir)/$$file" \
776: || exit 1; \
777: fi; \
778: done
779: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
780: if test "$$subdir" = .; then :; else \
781: test -d "$(distdir)/$$subdir" \
782: || $(MKDIR_P) "$(distdir)/$$subdir" \
783: || exit 1; \
784: fi; \
785: done
786: @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
787: if test "$$subdir" = .; then :; else \
788: dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
789: $(am__relativize); \
790: new_distdir=$$reldir; \
791: dir1=$$subdir; dir2="$(top_distdir)"; \
792: $(am__relativize); \
793: new_top_distdir=$$reldir; \
794: echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
795: echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
796: ($(am__cd) $$subdir && \
797: $(MAKE) $(AM_MAKEFLAGS) \
798: top_distdir="$$new_top_distdir" \
799: distdir="$$new_distdir" \
800: am__remove_distdir=: \
801: am__skip_length_check=: \
802: am__skip_mode_fix=: \
803: distdir) \
804: || exit 1; \
805: fi; \
806: done
807: -test -n "$(am__skip_mode_fix)" \
808: || find "$(distdir)" -type d ! -perm -755 \
809: -exec chmod u+rwx,go+rx {} \; -o \
810: ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
811: ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
812: ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
813: || chmod -R a+r "$(distdir)"
814: dist-gzip: distdir
815: tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
816: $(am__remove_distdir)
817:
818: dist-bzip2: distdir
819: tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
820: $(am__remove_distdir)
821:
822: dist-lzma: distdir
823: tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
824: $(am__remove_distdir)
825:
826: dist-xz: distdir
827: tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
828: $(am__remove_distdir)
829:
830: dist-tarZ: distdir
831: tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
832: $(am__remove_distdir)
833:
834: dist-shar: distdir
835: shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
836: $(am__remove_distdir)
837:
838: dist-zip: distdir
839: -rm -f $(distdir).zip
840: zip -rq $(distdir).zip $(distdir)
841: $(am__remove_distdir)
842:
843: dist dist-all: distdir
844: tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
845: $(am__remove_distdir)
846:
847: # This target untars the dist file and tries a VPATH configuration. Then
848: # it guarantees that the distribution is self-contained by making another
849: # tarfile.
850: distcheck: dist
851: case '$(DIST_ARCHIVES)' in \
852: *.tar.gz*) \
853: GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
854: *.tar.bz2*) \
855: bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
856: *.tar.lzma*) \
857: lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
858: *.tar.xz*) \
859: xz -dc $(distdir).tar.xz | $(am__untar) ;;\
860: *.tar.Z*) \
861: uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
862: *.shar.gz*) \
863: GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
864: *.zip*) \
865: unzip $(distdir).zip ;;\
866: esac
867: chmod -R a-w $(distdir); chmod a+w $(distdir)
868: mkdir $(distdir)/_build
869: mkdir $(distdir)/_inst
870: chmod a-w $(distdir)
871: test -d $(distdir)/_build || exit 0; \
872: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
873: && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
874: && am__cwd=`pwd` \
875: && $(am__cd) $(distdir)/_build \
876: && ../configure --srcdir=.. --prefix="$$dc_install_base" \
877: $(DISTCHECK_CONFIGURE_FLAGS) \
878: && $(MAKE) $(AM_MAKEFLAGS) \
879: && $(MAKE) $(AM_MAKEFLAGS) dvi \
880: && $(MAKE) $(AM_MAKEFLAGS) check \
881: && $(MAKE) $(AM_MAKEFLAGS) install \
882: && $(MAKE) $(AM_MAKEFLAGS) installcheck \
883: && $(MAKE) $(AM_MAKEFLAGS) uninstall \
884: && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
885: distuninstallcheck \
886: && chmod -R a-w "$$dc_install_base" \
887: && ({ \
888: (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
889: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
890: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
891: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
892: distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
893: } || { rm -rf "$$dc_destdir"; exit 1; }) \
894: && rm -rf "$$dc_destdir" \
895: && $(MAKE) $(AM_MAKEFLAGS) dist \
896: && rm -rf $(DIST_ARCHIVES) \
897: && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
898: && cd "$$am__cwd" \
899: || exit 1
900: $(am__remove_distdir)
901: @(echo "$(distdir) archives ready for distribution: "; \
902: list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
903: sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
904: distuninstallcheck:
905: @$(am__cd) '$(distuninstallcheck_dir)' \
906: && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
907: || { echo "ERROR: files left after uninstall:" ; \
908: if test -n "$(DESTDIR)"; then \
909: echo " (check DESTDIR support)"; \
910: fi ; \
911: $(distuninstallcheck_listfiles) ; \
912: exit 1; } >&2
913: distcleancheck: distclean
914: @if test '$(srcdir)' = . ; then \
915: echo "ERROR: distcleancheck can only run from a VPATH build" ; \
916: exit 1 ; \
917: fi
918: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
919: || { echo "ERROR: files left in build directory after distclean:" ; \
920: $(distcleancheck_listfiles) ; \
921: exit 1; } >&2
922: check-am: all-am
923: check: $(BUILT_SOURCES)
924: $(MAKE) $(AM_MAKEFLAGS) check-recursive
925: all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h
926: installdirs: installdirs-recursive
927: installdirs-am:
928: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \
929: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
930: done
931: install: $(BUILT_SOURCES)
932: $(MAKE) $(AM_MAKEFLAGS) install-recursive
933: install-exec: install-exec-recursive
934: install-data: install-data-recursive
935: uninstall: uninstall-recursive
936:
937: install-am: all-am
938: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
939:
940: installcheck: installcheck-recursive
941: install-strip:
942: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
943: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
944: `test -z '$(STRIP)' || \
945: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
946: mostlyclean-generic:
947:
948: clean-generic:
949: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
950:
951: distclean-generic:
952: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
953: -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
954:
955: maintainer-clean-generic:
956: @echo "This command is intended for maintainers to use"
957: @echo "it deletes files that may require special tools to rebuild."
958: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
959: clean: clean-recursive
960:
961: clean-am: clean-binPROGRAMS clean-generic clean-libtool \
962: clean-sbinPROGRAMS mostlyclean-am
963:
964: distclean: distclean-recursive
965: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
966: -rm -rf ./$(DEPDIR)
967: -rm -f Makefile
968: distclean-am: clean-am distclean-compile distclean-generic \
969: distclean-hdr distclean-libtool distclean-tags
970:
971: dvi: dvi-recursive
972:
973: dvi-am:
974:
975: html: html-recursive
976:
977: html-am:
978:
979: info: info-recursive
980:
981: info-am:
982:
983: install-data-am: install-man
984:
985: install-dvi: install-dvi-recursive
986:
987: install-dvi-am:
988:
989: install-exec-am: install-binPROGRAMS install-sbinPROGRAMS
990: @$(NORMAL_INSTALL)
991: $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
992: install-html: install-html-recursive
993:
994: install-html-am:
995:
996: install-info: install-info-recursive
997:
998: install-info-am:
999:
1000: install-man: install-man1
1001:
1002: install-pdf: install-pdf-recursive
1003:
1004: install-pdf-am:
1005:
1006: install-ps: install-ps-recursive
1007:
1008: install-ps-am:
1009:
1010: installcheck-am:
1011:
1012: maintainer-clean: maintainer-clean-recursive
1013: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1014: -rm -rf $(top_srcdir)/autom4te.cache
1015: -rm -rf ./$(DEPDIR)
1016: -rm -f Makefile
1017: maintainer-clean-am: distclean-am maintainer-clean-generic
1018:
1019: mostlyclean: mostlyclean-recursive
1020:
1021: mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1022: mostlyclean-libtool
1023:
1024: pdf: pdf-recursive
1025:
1026: pdf-am:
1027:
1028: ps: ps-recursive
1029:
1030: ps-am:
1031:
1032: uninstall-am: uninstall-binPROGRAMS uninstall-man \
1033: uninstall-sbinPROGRAMS
1034:
1035: uninstall-man: uninstall-man1
1036:
1037: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
1038: ctags-recursive install install-am install-exec-am \
1039: install-strip tags-recursive
1040:
1041: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
1042: all all-am am--refresh check check-am clean clean-binPROGRAMS \
1043: clean-generic clean-libtool clean-sbinPROGRAMS ctags \
1044: ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-lzma \
1045: dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
1046: distclean-compile distclean-generic distclean-hdr \
1047: distclean-libtool distclean-tags distcleancheck distdir \
1048: distuninstallcheck dvi dvi-am html html-am info info-am \
1049: install install-am install-binPROGRAMS install-data \
1050: install-data-am install-dvi install-dvi-am install-exec \
1051: install-exec-am install-exec-hook install-html install-html-am \
1052: install-info install-info-am install-man install-man1 \
1053: install-pdf install-pdf-am install-ps install-ps-am \
1054: install-sbinPROGRAMS install-strip installcheck \
1055: installcheck-am installdirs installdirs-am maintainer-clean \
1056: maintainer-clean-generic mostlyclean mostlyclean-compile \
1057: mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
1058: tags tags-recursive uninstall uninstall-am \
1059: uninstall-binPROGRAMS uninstall-man uninstall-man1 \
1060: uninstall-sbinPROGRAMS
1061:
1062:
1063: FRC:
1064: @: do-nothing action to prevent default SCCS get
1065: @: FRC "force" depends on nothing and is not a file, so is
1066: @: always out-of-date causing targets which depend on it to
1067: @: similarly always be outdated causing their rules to fire
1068: @: each time they or a dependent is built.
1069:
1070: check-autogen-version.def: FRC
1071: @cd $(srcdir) \
1072: && test -r ../include/autogen-version.def \
1073: && ( if cmp -s ../include/autogen-version.def autogen-version.def; \
1074: then : ; \
1075: else cp ../include/autogen-version.def autogen-version.def; \
1076: echo "Installing new sntp/autogen-version.def file"; \
1077: fi )
1078:
1079: $(srcdir)/autogen-version.def:
1080: $(MAKE) check-autogen-version.def
1081:
1082: check-version.def: FRC
1083: @cd $(srcdir) \
1084: && test -r ../include/version.def \
1085: && ( if cmp -s ../include/version.def version.def; \
1086: then : ; \
1087: else cp ../include/version.def version.def; \
1088: echo "Installing new sntp/version.def file"; \
1089: fi )
1090:
1091: $(srcdir)/version.def:
1092: $(MAKE) check-version.def
1093:
1094: check-version.m4: FRC
1095: @cd $(srcdir) \
1096: && test -r ../version.m4 \
1097: && ( if cmp -s ../version.m4 version.m4; \
1098: then : ; \
1099: else cp ../version.m4 version.m4; \
1100: echo "Installing new sntp/version.m4 file"; \
1101: fi )
1102:
1103: $(srcdir)/version.m4:
1104: $(MAKE) check-version.m4
1105:
1106: check-version.texi: FRC
1107: @cd $(srcdir) \
1108: && test -r ../include/version.texi \
1109: && ( if cmp -s ../include/version.texi version.texi; \
1110: then : ; \
1111: else cp ../include/version.texi version.texi; \
1112: echo "Installing new sntp/version.texi file"; \
1113: fi )
1114:
1115: $(srcdir)/version.texi:
1116: $(MAKE) check-version.texi
1117:
1118: $(srcdir)/../COPYRIGHT:
1119: cd .. && $(MAKE) COPYRIGHT-please
1120:
1121: check-COPYRIGHT-submake: $(srcdir)/../COPYRIGHT
1122: @cmp -s $(srcdir)/../COPYRIGHT $(srcdir)/COPYRIGHT \
1123: || { cp $(srcdir)/../COPYRIGHT $(srcdir) \
1124: && echo 'updated sntp/COPYRIGHT installed' ;}
1125: @echo 'submake avoided if this file is newer than parent COPYRIGHT' > $@
1126:
1127: check-COPYRIGHT: FRC
1128: [ ! -r $(srcdir)/../COPYRIGHT ] \
1129: || [ check-COPYRIGHT-submake -nt $(srcdir)/../COPYRIGHT ] \
1130: || $(MAKE) check-COPYRIGHT-submake
1131:
1132: $(srcdir)/COPYRIGHT: check-COPYRIGHT
1133: @: do-nothing action to prevent any default
1134:
1135: $(srcdir)/sntp-opts.h: $(srcdir)/sntp-opts.c
1136: @: do-nothing action to avoid default SCCS get, .h built with .c
1137:
1138: $(srcdir)/sntp-opts.c: $(srcdir)/sntp-opts.def $(srcdir)/version.def $(srcdir)/../include/copyright.def
1139: $(run_ag) sntp-opts.def
1140:
1141: $(srcdir)/sntp.1: $(srcdir)/sntp-opts.def $(srcdir)/version.def $(srcdir)/../include/copyright.def
1142: $(run_ag) -Tagman1.tpl -bsntp sntp-opts.def
1143:
1144: $(srcdir)/sntp-opts.menu: $(srcdir)/sntp-opts.texi
1145: @: do-nothing action to avoid default SCCS get, .menu built with .texi
1146:
1147: $(srcdir)/sntp-opts.texi: $(srcdir)/sntp-opts.def $(srcdir)/version.def $(srcdir)/../include/copyright.def
1148: $(run_ag) -Taginfo.tpl -DLEVEL=section sntp-opts.def
1149: $(top_srcdir)/../scripts/check--help $@
1150:
1151: $(srcdir)/sntp.html: $(srcdir)/sntp-opts.menu $(srcdir)/sntp-opts.texi $(srcdir)/sntp.texi $(srcdir)/version.texi
1152: cd $(srcdir) && ( makeinfo --force --html --no-split -o sntp.html sntp.texi || true )
1153:
1154: ../libntp/libntp.a:
1155: cd ../libntp && $(MAKE) libntp.a
1156:
1157: libtool: $(LIBTOOL_DEPS)
1158: ./config.status --recheck
1159:
1160: install-exec-hook:
1161: @case ${BINSUBDIR} in \
1162: bin) ODIR=${sbindir} ;; \
1163: sbin) ODIR=${bindir} ;; \
1164: esac; \
1165: test -z "${bin_PROGRAMS}${bin_SCRIPTS}" \
1166: || for i in ${bin_PROGRAMS} ${bin_SCRIPTS} " "; do \
1167: test ! -f $$ODIR/$$i || echo "*** $$i is also in $$ODIR!"; \
1168: done
1169:
1170: #
1171: $(DEPDIR)/deps-ver: $(top_srcdir)/deps-ver
1172: @[ -f $@ ] || \
1173: cp $(top_srcdir)/deps-ver $@
1174: @[ -w $@ ] || \
1175: chmod ug+w $@
1176: @cmp $(top_srcdir)/deps-ver $@ > /dev/null || ( \
1177: $(MAKE) clean && \
1178: echo -n "Prior $(subdir)/$(DEPDIR) version " && \
1179: cat $@ && \
1180: rm -rf $(DEPDIR) && \
1181: mkdir $(DEPDIR) && \
1182: case "$(top_builddir)" in \
1183: .) \
1184: ./config.status Makefile depfiles \
1185: ;; \
1186: ..) \
1187: cd .. && \
1188: ./config.status $(subdir)/Makefile depfiles && \
1189: cd $(subdir) \
1190: ;; \
1191: *) \
1192: echo 'Fatal: depsver.mf Automake fragment limited' \
1193: 'to immediate subdirectories.' && \
1194: echo "top_builddir: $(top_builddir)" && \
1195: echo "subdir: $(subdir)" && \
1196: exit 1 \
1197: ;; \
1198: esac && \
1199: echo -n "Cleaned $(subdir)/$(DEPDIR) version " && \
1200: cat $(top_srcdir)/deps-ver \
1201: )
1202: cp $(top_srcdir)/deps-ver $@
1203:
1204: .deps-ver: $(top_srcdir)/deps-ver
1205: @[ ! -d $(DEPDIR) ] || $(MAKE) $(DEPDIR)/deps-ver
1206: @touch $@
1207:
1208: #
1209: # depsver.mf included in Makefile.am for directories with .deps
1210: #
1211: # When building in the same directory with sources that change over
1212: # time, such as when tracking using bk, the .deps files can become
1213: # stale with respect to moved, deleted, or superceded headers. Most
1214: # commonly, this would exhibit as make reporting a failure to make a
1215: # header file which is no longer in the location given. To address
1216: # this issue, we use a deps-ver file which is updated with each change
1217: # that breaks old .deps files. A copy of deps-ver is made into
1218: # $(DEPDIR) if not already present. If $(DEPDIR)/deps-ver is present
1219: # with different contents than deps-ver, we make clean to ensure all
1220: # .o files built before the incompatible change are rebuilt along with
1221: # their updated .deps files, then remove $(DEPDIR) and recreate it as
1222: # empty stubs.
1223: #
1224: # It is normal when configured with --disable-dependency-tracking for
1225: # the DEPDIR to not have been created. For this reason, we use the
1226: # intermediate target .deps-ver, which invokes make recursively if
1227: # DEPDIR exists.
1228: #
1229: # If you modify depsver.mf, please make the changes to the master
1230: # copy, the one in sntp is copied by the bootstrap script from it.
1231: #
1232: # This comment block follows rather than leads the related code so that
1233: # it stays with it in the generated Makefile.in and Makefile.
1234: #
1235:
1236: # Tell versions [3.59,3.63) of GNU make to not export all variables.
1237: # Otherwise a system limit (for SysV at least) may be exceeded.
1238: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / ntp / sntp