Annotation of embedaddon/pciutils/ChangeLog, revision 1.1
1.1 ! misho 1: 2012-01-14 Martin Mares <mj@ucw.cz>
! 2:
! 3: * Released as 3.1.9.
! 4:
! 5: * Updated README.
! 6:
! 7: * Whereever we mention the PCI ID database, we now refer to
! 8: http://pci-ids.ucw.cz/ and the sf.net site is mentioned only
! 9: as a mirror. This includes update-pciids.
! 10:
! 11: * Decode PCIe Gen 3 speeds and link status fields.
! 12:
! 13: * Various minor bug fixes.
! 14:
! 15: * Updated pci.ids to the today's snapshot of the database.
! 16:
! 17: 2011-10-02 Martin Mares <mj@ucw.cz>
! 18:
! 19: * Released as 3.1.8.
! 20:
! 21: * More capabilities: Transaction Processing Hints, Latency Tolerance
! 22: Reporting. Thanks to Jesse Barnes.
! 23:
! 24: * Added BeOS and Haiku ports. Contributed by Francois Revol.
! 25:
! 26: * pciutils.pc now uses Libs.private properly.
! 27:
! 28: * When we format a name and it does not fit in the buffer, we truncate
! 29: it instead of returning "buffer too small" instead. This works on all
! 30: platforms with sane (i.e., C99-compatible) snprintf().
! 31:
! 32: * Various minor bug fixes.
! 33:
! 34: * Updated pci.ids to the today's snapshot of the database.
! 35:
! 36: 2010-01-31 Martin Mares <mj@ucw.cz>
! 37:
! 38: * Released as 3.1.7.
! 39:
! 40: * Minor improvements and bug fixes in decoding of the Virtual Channel
! 41: capability.
! 42:
! 43: 2010-01-24 Martin Mares <mj@ucw.cz>
! 44:
! 45: * Released as 3.1.6.
! 46:
! 47: * More capabilities decoded: Virtual Channel (except arbitration
! 48: tables), Root Complex Link, Vendor-Specific (header only), SATA HBA.
! 49:
! 50: * All extended capabilities have their version displayed (-vv or more).
! 51:
! 52: 2010-01-19 Martin Mares <mj@ucw.cz>
! 53:
! 54: * Released as 3.1.5.
! 55:
! 56: * Updated pci.ids to the today's snapshot of the database.
! 57:
! 58: * When scanning extended capabilities, properly mask the lowest 2 bits,
! 59: which are currently reserved. This avoids unaligned access errors on
! 60: broken hardware (see tests/broken-ecaps).
! 61:
! 62: * Large bar sizes are displayed in human-readable format (with units).
! 63: Thanks to Matthew Wilcox.
! 64:
! 65: * Physical slot information is displayed correctly for multi-function cards.
! 66: Fixed by Matthew Wilcox.
! 67:
! 68: * Fixed a couple of typos everywhere.
! 69:
! 70: * Library: Fixed bugs in freeing of capabilities.
! 71:
! 72: * Windows back-end compiles again.
! 73:
! 74: 2009-08-14 Martin Mares <mj@ucw.cz>
! 75:
! 76: * Released as 3.1.4.
! 77: (sorry that I have missed 22/7 and released it later :-))
! 78:
! 79: * Updated pci.ids to the today's snapshot of the database.
! 80:
! 81: * Fixed memory and file descriptor leak in the dump back-end.
! 82:
! 83: * The SR-IOV capability decoder now prints the VF BAR's.
! 84: Patch by Chris Wright, cleaned up by me.
! 85:
! 86: * On request of certain company's lawyers, we now include a copy
! 87: of the GPL with our package. It seems that the pciutils are getting
! 88: mature if the most important bug of the month was this one ;-)
! 89:
! 90: 2009-07-04 Martin Mares <mj@ucw.cz>
! 91:
! 92: * Released as 3.1.3.
! 93:
! 94: * Updated pci.ids to the current snapshot of the database.
! 95:
! 96: * The VPD parser now reports unknown and vendor-defined items
! 97: properly. It also stops on any item in unknown format, avoiding long
! 98: output on bogus VPD data. Thanks to Ben Hutchings and Matthew Wilcox.
! 99:
! 100: * The MSI-X table size now matches the spec. Thanks to Michael S.
! 101: Tsirkin.
! 102:
! 103: * The Power Management capability now includes the soft reset bit.
! 104: Thanks to Yu Zhao.
! 105:
! 106: * Decoding of the Advanced Features capability has been added.
! 107: Thanks to Yu Zhao.
! 108:
! 109: * The whole package compiles on GNU/kFreeBSD again.
! 110:
! 111: The following patches have been contributed by Matthew Wilcox:
! 112:
! 113: * The procfs back-end is able to cope with /proc/bus/pci
! 114: containing names with domains, which occur on sparc64 and
! 115: possibly other architectures due to a kernel bug.
! 116:
! 117: * The sysfs back-end no longer complains when a slot address
! 118: is missing, which happens with old versions of Linux fakephp.
! 119:
! 120: * The Device Serial Number capability is printed in the right
! 121: byte order.
! 122:
! 123: * The MSI and MSI-X capabilities are printed in a prettier way.
! 124:
! 125: * The tree output mode (`lspci -t') shows domain numbers only
! 126: at the root, which makes the output more compact.
! 127:
! 128: * Updated documentation on the bus mapping mode (`lspci -M').
! 129:
! 130: 2009-02-01 Martin Mares <mj@ucw.cz>
! 131:
! 132: * Released as 3.1.2.
! 133:
! 134: * Fixed another silly bug in the command-line parser of setpci.
! 135:
! 136: 2009-01-30 Martin Mares <mj@ucw.cz>
! 137:
! 138: * Released as 3.1.1.
! 139:
! 140: * Updated pci.ids to the current snapshot of the database.
! 141:
! 142: * The configure script now sets LC_ALL to avoid being fooled by
! 143: locale-dependent behavior of `tr'.
! 144:
! 145: * The command-line parser of setpci did sometimes segfault on invalid
! 146: input. Thanks to Andreas Wiese for a fix.
! 147:
! 148: 2009-01-18 Martin Mares <mj@ucw.cz>
! 149:
! 150: * Released as 3.1.0.
! 151:
! 152: * Updated pci.ids to the current snapshot of the database.
! 153:
! 154: * The Cygwin backend now works on Windows Vista. Thanks to Jonathan
! 155: Kotta.
! 156:
! 157: * Fixed a bug in decoding of the SR-IOV capability. Patch by Yu Zhao.
! 158:
! 159: * Details of some PCIe capabilities are displayed only with -vv.
! 160:
! 161: * When a BAR is reported by the OS, but not by the device (i.e.,
! 162: it is marked as [virtual] in lspci), the [disabled] flag is
! 163: suppressed, because it does not make sense in such cases.
! 164: Patch by Yu Zhao.
! 165:
! 166: 2008-12-13 Martin Mares <mj@ucw.cz>
! 167:
! 168: * The source code of lspci has been split to multiple files, hopefully
! 169: making it easier to maintain.
! 170:
! 171: * The library and lspci now know about physical slot names. So far,
! 172: they are provided by the sysfs back-end only. Thanks go to Alex Chiang.
! 173:
! 174: * When a device has the VPD (Vital Product Data) capability and the
! 175: VPD data are supplied by the OS, they are decoded and printed in the
! 176: verbose mode. This currently works only on Linux with the sysfs
! 177: back-end. Thanks to Ben Hutchings of Solarflare for the patch.
! 178:
! 179: * `setpci --version' now works properly.
! 180:
! 181: * `setpci --dumpregs' prints a table of all known names of
! 182: registers and capabilities. This replaces the table of registers
! 183: in the setpci man page.
! 184:
! 185: * The dry-run mode of setpci gives better feedback.
! 186:
! 187: * The setpci utility is now able to address registers stored in PCI
! 188: capabilities (actually it allows a more general form of relative
! 189: addressing).
! 190:
! 191: * The library has gained functions for working with PCI capabilities.
! 192:
! 193: * Address Translation Services capability is now decoded. Patch by
! 194: Yu Zhao.
! 195:
! 196: 2008-11-09 Martin Mares <mj@ucw.cz>
! 197:
! 198: * Released as 3.0.3.
! 199:
! 200: * `lspci -k' now displays the subsystem ID, too. This makes `-k'
! 201: show everything needed to identify the device and the available
! 202: drivers, which was called for by many users.
! 203:
! 204: * Fixed spelling of MSI. Patch by Matthew Wilcox.
! 205:
! 206: * Better support for cross-compilation. Thanks to Alon Bar-Lev
! 207: for the patch.
! 208:
! 209: * Fixed printing of the AER capability. Patch by Max Asbock.
! 210:
! 211: * HT 1.02 capabilities are decoded as HT 1.03. Suggested by
! 212: Carl-Daniel Hailfinger.
! 213:
! 214: * Fixed Cygwin build. Thanks to Steve Elliott for reporting the bug.
! 215:
! 216: * Updated pci.ids to the current snapshot of the database.
! 217:
! 218: 2008-09-19 Martin Mares <mj@ucw.cz>
! 219:
! 220: * Released as 3.0.2.
! 221:
! 222: * Fixed a minor bug in the configure script, which caused warnings
! 223: about redefinition of symbols during compilation.
! 224:
! 225: 2008-09-11 Martin Mares <mj@ucw.cz>
! 226:
! 227: * Released as 3.0.1.
! 228:
! 229: * Updated pci.ids to the most recent snapshot.
! 230:
! 231: * Added a Cygwin port. Patch by Christopher Voltz, ported to the
! 232: current tree by Martin Mares.
! 233:
! 234: * Worked around compatibility problems with various default settings
! 235: of wget (we have to set --no-timestamping explicitly). Thanks to Ville
! 236: Skytta for pointing that out.
! 237:
! 238: * Fixed printing of MSI capabilities. Thanks to Matthew Wilcox for
! 239: a patch.
! 240:
! 241: * Added decoding of several PCI-X capabilities: device/link/slot 2,
! 242: Advanced Error Reporting, Access Control Services, Alternative Routing-ID,
! 243: Single Root I/O Virtualization. Thanks to Yu Zhao for patches.
! 244:
! 245: * Fixed bug in filters which caused them to refuse vendor/device ID 0xffff.
! 246:
! 247: * README: The linux-pci mailing list has moved to linux-pci@vger.kernel.org.
! 248:
! 249: * Fixed several build problems: builds without PCI_USE_DNS on Linux
! 250: and with PCI_USE_DNS on Solaris and *BSD. Static library mode also
! 251: compiles again on old versions of GCC.
! 252:
! 253: 2008-04-10 Martin Mares <mj@ucw.cz>
! 254:
! 255: * Released as 3.0.0.
! 256:
! 257: * Updated API and ABI version.
! 258:
! 259: 2008-02-20 Martin Mares <mj@ucw.cz>
! 260:
! 261: * Released as 2.99.1-alpha2.
! 262:
! 263: * Changed the default domain for the DNS resolver.
! 264:
! 265: 2008-02-18 Martin Mares <mj@ucw.cz>
! 266:
! 267: * Released as 2.99.1-alpha1.
! 268:
! 269: * The makefile system has been reworked. All configuration settings
! 270: are now passed to the configure script in environment variables,
! 271: allowing for easy tweaking in the top-level Makefile. All control
! 272: knobs are now described in the README.
! 273:
! 274: * The libpci can be built as a shared library with properly restricted
! 275: symbol exports. Use `make SHARED=yes' to enable that or `make SHARED=local'
! 276: for a local testing build (with hardwired paths to the library, so that
! 277: it does not need installation).
! 278:
! 279: * The example program has been moved from lib/example.c to the top-level
! 280: directory, because it should be built exactly as the other utilities
! 281: are. It has been also improved slightly to educate better.
! 282:
! 283: * The i386-ports method is enabled on Linux/x86_64 as well.
! 284:
! 285: 2008-02-13 Martin Mares <mj@ucw.cz>
! 286:
! 287: * Released as 2.2.10-net2.
! 288:
! 289: * Support for resolving of PCI ID's using DNS together with a local
! 290: cache of resolved entries has been added. See the `-q' and `-Q' options
! 291: of lspci.
! 292:
! 293: * The library now has a generic system of settable parameters, which
! 294: also include settings of the DNS resolver and cache. An `-O' option
! 295: has been added to lspci and setpci to allow setting of these options.
! 296:
! 297: * Configuration of the access methods are now specified by the new
! 298: parameter system, replacing the pci_access->method_params array.
! 299:
! 300: * Access methods now also have sensible names and help texts and it
! 301: is possible to look up method ID by a name.
! 302:
! 303: * An `-A' switch has been added to both lspci and setpci, allowing to
! 304: select an arbitrary access method. The `-P' switch (configure proc
! 305: backend) has been removed as it is no longer needed and I do not know
! 306: any its user.
! 307:
! 308: * Several source files have been split for better maintainability
! 309: (most notably the resolving of ID's).
! 310:
! 311: * Man pages and help texts have been updated. A new man page `pcilib(7)'
! 312: has been added and description of library options has been moved there.
! 313:
! 314: * When an unknown device ID is encountered, we print `Device <id>'
! 315: instead of `Unknown device <id>'. It uses less space and it also
! 316: should reduce the number of inexperienced users complaining that
! 317: the device is not supported by the OS. To lookup up OS drivers,
! 318: use the `-k' option.
! 319:
! 320: * PCI_LIB_VERSION has been bumped to 0x020299.
! 321:
! 322: * Makefile: stripping of the binaries during installation can be
! 323: overridden by the STRIP variable.
! 324:
! 325: * lib/types.h: We use the integer types from <stdint.h> if the
! 326: compiler claims C99 support.
! 327:
! 328: 2008-02-11 Martin Mares <mj@ucw.cz>
! 329:
! 330: * Released as 2.2.10.
! 331:
! 332: * lspci.c, setpci.c: Cleaned up the list of options.
! 333:
! 334: * lib/names.c: Fix displaying of errors reported by zlib.
! 335: Previously, the buffer containing the error message had
! 336: been deallocated by gzclose() before the message was printed.
! 337:
! 338: 2008-01-07 Martin Mares <mj@ucw.cz>
! 339:
! 340: * update-pciids.sh: Added quiet mode (-q). Clean up uncompressed
! 341: files left by previous versions of the pciutils. Patch by Mike
! 342: Frysinger.
! 343:
! 344: * update-pciids.man: Mention the -q switch.
! 345:
! 346: 2007-11-29 Martin Mares <mj@ucw.cz>
! 347:
! 348: * lib/dump.c: Squashed compiler warnings about code with
! 349: no effect (there really were surplus *'s).
! 350:
! 351: 2007-11-06 Martin Mares <mj@ucw.cz>
! 352:
! 353: * Released as 2.2.9.
! 354:
! 355: * lspci.c: Added a new switch `-k' which requests printing
! 356: of information on kernel drivers attached to each device
! 357: and on kernel modules reporting the ability to handle the
! 358: device. So far, this is supported only on Linux with the
! 359: sysfs back-end, so it is implemented internally in the lspci
! 360: instead of the libpci. Thanks to Anicka <anicka@anicka.net>
! 361: for help.
! 362:
! 363: 2007-10-19 Martin Mares <mj@ucw.cz>
! 364:
! 365: * Makefile, lib/Makefile: Moved -lz from LDFLAGS to LDLIBS.
! 366: Also added an explicit pattern rule for linking to make sure
! 367: that LDLIBS is used on all platforms. Thanks to Dan Nicholson
! 368: for the suggestion.
! 369:
! 370: 2007-10-19 Martin Mares <mj@ucw.cz>
! 371:
! 372: * Released as 2.2.8.
! 373:
! 374: * pci.ids: Revised class codes to match Conventional PCI 3.0 specs.
! 375: Added a couple of new ones, renumbered `ADMA continuous operation'
! 376: prog-if to 0x30 (even the old SATA Class Code ECN doesn't mention
! 377: 0x40) and renumbered the satellite communication controllers.
! 378:
! 379: * lib/header.h: Include `PCI hot-plug' and `Secure device'
! 380: capabilities from PCI 3.0 specs. Also added `SATA HBA' and
! 381: `Advanced features' caps from various ECN's.
! 382:
! 383: * lspci.c: All known capabilities have at least their name displayed
! 384: now. When we are unable to decode them completely, we signalize it
! 385: with a `<?>' mark.
! 386:
! 387: * lspci.man: Document `<?>' and also mention that extended config
! 388: space is currently available only with the linux_sysfs back-end.
! 389:
! 390: * lspci.c: Decode the Debug port capability (per EHCI 0.96 spec).
! 391:
! 392: * lspci.c: Big code cleanup: re-arranged functions in the code,
! 393: renamed everything related to capabilities to cap_* and
! 394: all options except verbose to opt_*.
! 395:
! 396: 2007-10-14 Martin Mares <mj@ucw.cz>
! 397:
! 398: * lib/[fno]bsd-*: Removed extraneous braces.
! 399:
! 400: 2007-10-12 Martin Mares <mj@ucw.cz>
! 401:
! 402: * Capability loop detection introduced 2.2.7 did not work
! 403: properly with extended capabilities. Fixed.
! 404:
! 405: 2007-10-05 Martin Mares <mj@ucw.cz>
! 406:
! 407: * Released as 2.2.7.
! 408:
! 409: * lspci.c (show_caps, show_ext_caps): Detect and report loops in
! 410: capability lists.
! 411:
! 412: * lspci.c, lib/header.h: Finished decoding of the PCI Express
! 413: capability. The extended capabilities remain undecoded for now,
! 414: but at least the list of them has been updated to reflect the
! 415: current PCI Express 2.0 spec.
! 416:
! 417: * lspci.c, lib/header.h: Decode new bits of traditional registers
! 418: as defined by PCIE / PCI-X. This includes discard timers in the bridge
! 419: control register and INTx enable/status in device control/status
! 420: registers.
! 421:
! 422: * lib/fbsd-device.c: Support domains on new FreeBSD's. Contributed
! 423: by Marius Strobl.
! 424:
! 425: 2007-09-12 Hasso Tepper <hasso@estpak.ee>
! 426:
! 427: * Extended the fbsd-device backend to run on Dragonfly BSD.
! 428:
! 429: * lspci.c: alloca() is declared in <stdlib.h> on BSD's, not <alloca.h>.
! 430:
! 431: 2007-09-03 Martin Mares <mj@ucw.cz>
! 432:
! 433: * Resurrected the Windows port, including cross-compilation by MinGW.
! 434: Patch by Samuel Bronson <naesten@gmail.com>.
! 435:
! 436: 2007-08-31 Martin Mares <mj@ucw.cz>
! 437:
! 438: * Makefile, lib/Makefile: `ar' and `ranlib' can be overriden to allow
! 439: cross-compilation.
! 440:
! 441: 2007-08-27 Martin Mares <mj@ucw.cz>
! 442:
! 443: * lib/names.c (pci_open): When calling gzopen(), use "rb" file mode
! 444: instead of "r". This is needed on DOS systems, where this function
! 445: somewhat illogically uses the binary flag for the compressed file
! 446: instead of the decompressed stream inside, where binariness really
! 447: matters.
! 448:
! 449: 2007-08-14 Martin Mares <mj@ucw.cz>
! 450:
! 451: * lspci.c (show_ht): Added decoding of Hypertransport MSI mapping capability,
! 452: based on a patch by Jason Gunthorpe.
! 453:
! 454: * tests/cap-MSI-mapping: Added a test case. I plan to add test cases
! 455: (which are dumps of config space) for all new features.
! 456:
! 457: 2007-06-20 Martin Mares <mj@ucw.cz>
! 458:
! 459: * Released as 2.2.6.
! 460:
! 461: * Makefile: Added an "install-lib" target. Thanks to Dan Nicholson
! 462: for a patch.
! 463:
! 464: * Makefile, lib/Makefile: Generate and install pkg-config file
! 465: for libpci. Again by Dan Nicholson.
! 466:
! 467: 2007-06-20 Thomas Schwinge <tschwinge@gnu.org>
! 468:
! 469: * lib/i386-io-hurd.h: Rewritten for new Hurd kernels.
! 470:
! 471: 2007-05-04 Martin Mares <mj@ucw.cz>
! 472:
! 473: * Released as 2.2.5.
! 474:
! 475: * pci.ids: Updated to the current snapshot of the database.
! 476:
! 477: 2007-02-14 Martin Mares <mj@ucw.cz>
! 478:
! 479: * lspci.c (show_express): Added PCI/PCI-X to PCI-Express Bridge type.
! 480: Patch by Mark Glines.
! 481:
! 482: 2007-02-09 Martin Mares <mj@ucw.cz>
! 483:
! 484: * pci.ids: Updated to the current snapshot of the database.
! 485:
! 486: 2007-02-06 Martin Mares <mj@ucw.cz>
! 487:
! 488: * Replaced bzero() by memset() everywhere, it's better to lose a tiny
! 489: bit of readability than maintain hacks to make it work on various systems.
! 490:
! 491: * lib/configure: tr on Solaris is a bit weird and it requires `[A-Z]'
! 492: instead of `A-Z'. Fortunately, the extra brackets don't hurt otherwise.
! 493:
! 494: * lib/types.h, lib/configure: Solaris should use <stdint.h> to get precise
! 495: integer types.
! 496:
! 497: 2007-02-04 Martin Mares <mj@ucw.cz>
! 498:
! 499: * lspci.c: alloca() needs <alloca.h>.
! 500:
! 501: 2006-09-17 Martin Mares <mj@ucw.cz>
! 502:
! 503: * lib/dump.c: Fixed a couple of bugs in the dump backend which caused
! 504: devices with domains or with extended config space to be read incorrectly.
! 505: Also, dumps with partial lines are allowed now.
! 506:
! 507: 2006-09-10 Martin Mares <mj@ucw.cz>
! 508:
! 509: * pci.ids: Updated to the current database snapshot.
! 510:
! 511: * lspci.c (scan_device): If an error occurs when reading the standard config
! 512: header of a device, report it and ignore the device and return with exit
! 513: code 2 at the end.
! 514:
! 515: 2006-09-09 Martin Mares <mj@ucw.cz>
! 516:
! 517: * Released as 2.2.4.
! 518:
! 519: * maint/release: Remind the maintainer about the current PCI_LIB_VERSION.
! 520:
! 521: * lib/pci.h: Updated PCI_LIB_VERSION.
! 522:
! 523: * lspci.c (show_machine): In the `-m' mode, do proper shell escaping
! 524: if the fields printed contain quotes or backslashes.
! 525:
! 526: * lspci.c (show_machine): Added a `-vmm' mode, which removes the misuse
! 527: of the `Device' tag for two different purposes.
! 528:
! 529: * Makefile: Moved all system-dependent decisions to lib/configure,
! 530: since config.mk is included in the top-level Makefile anyway.
! 531:
! 532: * lib/configure: When configuring for Linux, ignore the kernel version
! 533: and always build all access methods.
! 534:
! 535: * Makefile (CFLAGS): Removed -Winline, it's not needed and triggers
! 536: at many non-interesting places with gcc 3.4.
! 537:
! 538: * Whitespace cleanup of all source files.
! 539:
! 540: * The pci.ids file can be stored compressed if zlib is available.
! 541: Added transparent decompression to lib/names.c, modified update-pciids.sh
! 542: to keep the file compressed if applicable, updated Makefiles.
! 543: Based on a patch by Matthew Wilcox, but all the bugs are mine.
! 544:
! 545: * Makefile, README: Allow installation to be done to a different directory
! 546: from the one we will eventually be placed in by setting DESTDIR.
! 547: Patch by Matthew Wilcox.
! 548:
! 549: * Added .gitignore files.
! 550:
! 551: * Makefile (clean): Clean *.orig, too.
! 552:
! 553: * Cleaned up usage of `char' and `byte'.
! 554:
! 555: * lib/header.h: PCI_CLASS_DOCKING_OTHER should be 0x0a80, not 0x0a01.
! 556:
! 557: * lib/header.h: Added PCI_CLASS_xxx constants for all classes currently
! 558: defined in the pci.ids file.
! 559:
! 560: 2006-08-01 Martin Mares <mj@ucw.cz>
! 561:
! 562: * lib/i386-io-hurd.h: Fixed a silly typo.
! 563:
! 564: 2006-07-30 Martin Mares <mj@ucw.cz>
! 565:
! 566: * lib/Makefile: Added a missing rule for obsd-device.o.
! 567:
! 568: * lspci.c, lib/header.h: Added support for MSI per-vector masking.
! 569: Contributed by Petr Vandrovec.
! 570:
! 571: * lspci.c, lib/header.h: Added support for the `bridge subsystem ID'
! 572: capability. Contributed by Petr Vandrovec.
! 573:
! 574: * lspci.c (show_htype1): Fixed bug in printing of 64-bit prefetchable
! 575: memory windows. Fix by Petr Vandrovec.
! 576:
! 577: * maint/release.pm: Exclude .git directory from releases.
! 578:
! 579: * lib/i386-ports.c, lib/i386-io-*: Report failures during port access
! 580: initialization by a->warn() instead of calling printf() or perror()
! 581: directly.
! 582:
! 583: * lib/i386-ports.c, lib/i386-io-*: Moved the logic which keeps track of
! 584: the port access state to generic code.
! 585:
! 586: * lib/i386-io-hurd.h: Ask the kernel for I/O port access appropriately.
! 587: Contributed by Thomas Schwinge and Samuel Thibault.
! 588:
! 589: * lib/i386-ports.c: Define _GNU_SOURCE, it's needed by the Hurd module.
! 590:
! 591: * lib/header.h: Whitespace cleanups.
! 592:
! 593: * lib/i386-io-windows.h: Fixed indentation and spelling.
! 594:
! 595: * README.Windows: Mention that WinIO.dll is needed and where to get it.
! 596:
! 597: 2006-06-27 Martin Mares <mj@ucw.cz>
! 598:
! 599: * lib/Makefile, Makefile: Added rules for building and cleaning the example.
! 600:
! 601: * lib/example.c: Show how to use PCI_FILL_CLASS and used another register
! 602: for demonstrating the config space accesses. The example is still very
! 603: incomplete, though.
! 604:
! 605: * lib/pci.h, lib/generic.c: Added PCI_FILL_CLASS.
! 606:
! 607: * lib/sysfs.c: Fetch device ID and class from sysfs, because they can
! 608: be modified by kernel fixups.
! 609:
! 610: * lspci.c: Use PCI_FILL_CLASS. Thanks to Matthew Willcox for the patch.
! 611:
! 612: 2006-06-03 Martin Mares <mj@ucw.cz>
! 613:
! 614: * lspci.c: Introduced the -nn switch. Thanks to David N. Welton
! 615: for the idea.
! 616:
! 617: * lib/names.c (pci_lookup_name): Introduced PCI_LOOKUP_MIXED and
! 618: cleaned up the name selection code.
! 619:
! 620: * lib/names.c (pci_lookup_name): If PCI_LOOKUP_NO_NUMBERS is given,
! 621: pci_access->numeric_ids is ignored.
! 622:
! 623: * lib/names.c (pci_lookup_name): When class is identified and
! 624: subclass isn't, display class name and subclass number.
! 625:
! 626: 2006-05-31 Martin Mares <mj@ucw.cz>
! 627:
! 628: * setpci.c (main): Don't crash when an invalid width is specified.
! 629:
! 630: * lspci.c, setpci.c, common.c: die() now uses the right program
! 631: name when printing an error message.
! 632:
! 633: 2006-05-19 Martin Mares <mj@ucw.cz>
! 634:
! 635: * README: Mention the public GIT tree.
! 636:
! 637: * README: Updated the list of ports.
! 638:
! 639: 2006-05-10 Martin Mares <mj@ucw.cz>
! 640:
! 641: * lib/configure, lib/fbsd-device.c: Added support for GNU/kFreeBSD.
! 642: Thanks to Petr Salinger for the patch.
! 643:
! 644: 2006-05-05 Martin Mares <mj@ucw.cz>
! 645:
! 646: * Released as 2.2.3.
! 647:
! 648: * lspci.c (scan_device): The -D switch didn't work as intended
! 649: in -m mode.
! 650:
! 651: 2006-05-05 Martin Mares <mj@ucw.cz>
! 652:
! 653: * Released as 2.2.2.
! 654:
! 655: * pci.ids: Updated to the current database snapshot.
! 656:
! 657: * lib/obsd-device.c (and other files in lib/*): Added OpenBSD
! 658: interface by Matthieu Herrb <matthieu.herrb@laas.fr>, based on
! 659: the existing FreeBSD interface.
! 660:
! 661: * Moved pciutils to a GIT repository, which now contains merged
! 662: history from both CVS and Arch. Good bye, TLA!
! 663:
! 664: 2006-03-21 Martin Mares <mj@ucw.cz>
! 665:
! 666: * lspci.c (show_slot_name): Avoid the previous changes in default
! 667: display of domain name when in machine-readable mode. However, `-D'
! 668: forces domain display even there.
! 669:
! 670: * lspci.man: Added a warning on -m being the only format, which is
! 671: guaranteed to be stable between lspci versions.
! 672:
! 673: 2006-03-13 Martin Mares <mj@ucw.cz>
! 674:
! 675: * lspci.man: Documented the -D switch.
! 676:
! 677: * lspci.c (show_slot_name, scan_device): If there are multiple PCI
! 678: domains or if the `-D' switch is used, show the domain number for
! 679: all devices.
! 680:
! 681: * lspci.c (show_verbose): Report cache line size in bytes.
! 682:
! 683: * update-pciids.sh: Use curl if available. Patch by Matthew Wilcox.
! 684:
! 685: 2006-01-04 Martin Mares <mj@ucw.cz>
! 686:
! 687: * lspci.c (show_express_link): Fixed decoding of link status register.
! 688: Thanks to Roland Dreier for his report.
! 689:
! 690: 2005-12-12 Martin Mares <mj@ucw.cz>
! 691:
! 692: * lib/nbsd-libpci.c: If libpci is used by an ordinary user, allow
! 693: at least read-only access. Patch by Pavel Celeda <celeda@liberouter.org>.
! 694:
! 695: * Makefile: Corrected library path on NetBSD.
! 696:
! 697: 2005-11-26 Martin Mares <mj@ucw.cz>
! 698:
! 699: * Released as 2.2.1.
! 700:
! 701: * lspci.c (show_machine): Subsystem vendors were printed incorrectly
! 702: in machine-readable modes. Thanks to Pavel Celeda for a bug report.
! 703:
! 704: 2005-10-11 Martin Mares <mj@ucw.cz>
! 705:
! 706: * lspci.c (new_bus): Fixed a memory leak. Thanks to Paul Sangree for reporting it.
! 707:
! 708: 2005-09-21 Martin Mares <mj@ucw.cz>
! 709:
! 710: * Released as 2.2.0.
! 711:
! 712: * pci.ids: Updated copyright header.
! 713:
! 714: * lib/sysfs.c (sysfs_get_resources): Removed warning about unsupported
! 715: 64-bit addresses, they are now always supported.
! 716:
! 717: * lspci.c (show_bases): Corrected printing of 64-bit addresses
! 718: in bus-centric mode.
! 719:
! 720: * lib/configure: Enable 64-bit addresses on all Linux systems.
! 721:
! 722: * lib/types.h: Don't pad 64-bit addresses to 16 xigits, only to 8 if they
! 723: are shorter.
! 724:
! 725: 2005-09-11 Martin Mares <mj@ucw.cz>
! 726:
! 727: * Released as 2.1.99-test11.
! 728:
! 729: * lspci.c: Removed unnecessary trailing zeros in pci_lookup_name() calls.
! 730:
! 731: 2005-09-10 Martin Mares <mj@ucw.cz>
! 732:
! 733: * Released as 2.1.99-test10.
! 734:
! 735: * pci.ids: Synchronized with the current database snapshot.
! 736:
! 737: * update-pciids.sh: Changed the default URL for downloading pci.ids
! 738: to http://pciids.sourceforge.net/v2.2/pci.ids.
! 739:
! 740: * lib/pci.h (PCI_LIB_VERSION): Added version identifier.
! 741:
! 742: * lib/names.c: Rewritten the name database module almost from scratch.
! 743: Everything is much cleaner and there are hopefully no more memory leaks;
! 744: pci_lookup_name() now uses varargs in a backward compatible fashion.
! 745: Introduced PCI_LOOKUP_NO_NUMBERS.
! 746:
! 747: The new code supports subsystem entries not tied to a specific device.
! 748: I had to extend the format of pci.ids in order to support it, so I have
! 749: extended the idea of the "C" (class) blocks and introduced "S" blocks
! 750: for subsystems. To avoid doing more incompatible changes in the future,
! 751: the parser skips unknown single-letter blocks without reporting errors.
! 752:
! 753: 2005-08-23 Martin Mares <mj@ucw.cz>
! 754:
! 755: * Released as 2.1.99-test9.
! 756:
! 757: * Makefile (OPT): Removed -fomit-frame-pointer, it's default in recent
! 758: gcc versions when optimizing anyway.
! 759:
! 760: * Made the path to pci.ids customizable and independent on the SHAREDIR.
! 761: Just override IDSDIR in the top-level Makefile.
! 762:
! 763: * pci.ids: Synchronized with the current database snapshot.
! 764:
! 765: * lspci.man, setpci.man: Improved the man pages. Documented all access
! 766: methods and which operations are privileged.
! 767:
! 768: * lspci.c: Another rewrite of config register caching, now also including
! 769: lots of internal checks. It should be now perfectly able to cope with
! 770: portions of the configuration space being inaccessible, for example
! 771: due to insufficient access rights.
! 772:
! 773: * lspci.c (show_pcix_nobridge, show_pcix_bridge): Cleaned up dumping of PCI-X
! 774: capabilities. Includes partial support for PCI-X 2.0 (probably incomplete
! 775: as I haven't seen the spec).
! 776:
! 777: * lspci.c: Quell warnings about unused parameters.
! 778:
! 779: * lspci.c: Removed C++ comments.
! 780:
! 781: * lib/header.h: Merged definitions of extended capabilities and some new
! 782: PCI-X capability bits from linux-2.6.11/include/pci.h.
! 783:
! 784: * lspci.c (show_caps): Try to scan extended capabilities only if the
! 785: device has either PCI-X or PCI Express capability in its normal capability
! 786: list.
! 787:
! 788: * lib/dump.c (dump_init): Reading of dumps works again. The dump reader
! 789: now also remembers how much data it has read and refuses attempts to
! 790: access more than that.
! 791:
! 792: * setpci.man, lspci.c, README: prefer spelling "buses" over "busses".
! 793:
! 794: * lspci.c: If alloca() is not available, use xmalloc(), not malloc().
! 795:
! 796: * lib/configure: Added x86_64 on Linux.
! 797:
! 798: 2005-08-22 Martin Mares <mj@ucw.cz>
! 799:
! 800: * lib/filter.c (pci_filter_parse_slot): Fixed parsing of domain filters.
! 801: Thanks to Matthew Wilcox for bug report.
! 802:
! 803: * lspci.c: Corrected spelling of "Hz" (it was "hz" at several places).
! 804: Thanks to Krzysztof Oledzki for pointing that out.
! 805:
! 806: 2004-08-19 Martin Mares <mj@ucw.cz>
! 807:
! 808: * pciutils.spec (%attr): Setting attributes for /sbin/* is an anachronism,
! 809: because pciutils by default install to /usr/sbin. Update.
! 810:
! 811: 2004-08-13 Martin Mares <mj@ucw.cz>
! 812:
! 813: * Released as 2.1.99-test8.
! 814:
! 815: * lib/types.h, lib/pci.h, lib/sysdep.h: `byte' and `word' are
! 816: no longer exported to the outside world.
! 817:
! 818: * README.Windows: Updated.
! 819:
! 820: * maint/release: Substitute version number in win32/config.h.
! 821:
! 822: * win32/config.h: Added.
! 823:
! 824: * lib/sysdep.h (bzero, strcasecmp): are macros on Windows.
! 825:
! 826: * compat/getopt.[ch]: Added copies of getopt.[ch] from the GNU
! 827: C library for use on systems where the default libraries lack
! 828: proper getopt. Currently used by the Windows port.
! 829:
! 830: * lib/sysdep.h, lib/types.h: Updates of the Windows port from
! 831: Alexander Stock.
! 832:
! 833: * lib/types.h: If PCI_HAVE_Uxx_TYPES is defined, libpci doesn't define
! 834: its own u8, u16, u32, byte and word types and uses what the user
! 835: has supplied instead. With this change, all namespace clashes should
! 836: be gone.
! 837:
! 838: * Makefile, lib/Makefile: Updated dependencies.
! 839:
! 840: * pciutils.h: Include lib/sysdep.h and move NONRET et al. there.
! 841:
! 842: * lib/sysdep.h: No need to include <sys/types.h> on FreeBSD, because
! 843: it is included unconditionally in lib/types.h.
! 844:
! 845: * Moved system-dependent stuff from lib/internal.h to lib/sysdep.h,
! 846: which is also used by the utilities. Also moved type declarations
! 847: from lib/pci.h to lib/types.h.
! 848:
! 849: * All files: Prepend a "PCI_" prefix in front of all configuration
! 850: defines to avoid namespace clashes. CAVEAT: If there is any libpci
! 851: application using the (undocumented) defines, it has to be updated.
! 852:
! 853: * lib/Makefile: Killed HAVE_OWN_HEADER_H, since we stopped sharing
! 854: headers with the kernel a couple of years ago.
! 855:
! 856: * lib/sysfs.c (sysfs_get_resources): We have 7 resources, not 6.
! 857:
! 858: * lspci.c (show_rom): Use the same logic for printing disabled
! 859: or unassigned ROM's as we do in show_bases() for the other BAR's.
! 860:
! 861: * lib/generic.c (pci_generic_fill_info): Better reaction to
! 862: invalid 64-bit addresses. Also d->hdrtype should not include
! 863: bit 7, which caused mysterious errors on multi-function devices.
! 864:
! 865: * lib/generic.c (pci_generic_fill_info): Fill in base addresses
! 866: even if the regions are known to be disabled. It is the client's
! 867: job to interpret them. (And it is not a trivial job if you want
! 868: to do it correctly, since you need to check I/O and memory enables
! 869: on all upstream bridges, too.) However, it could be interesting to
! 870: introduce functions for interpreting the addresses and even for
! 871: mapping the regions and doing I/O on them.
! 872:
! 873: 2004-07-30 Martin Mares <mj@ucw.cz>
! 874:
! 875: * lspci.c: HyperTransport improvements from Maciej.
! 876:
! 877: 2004-07-11 Martin Mares <mj@ucw.cz>
! 878:
! 879: * lib/sysfs.c (sysfs_get_resources): Arguments now correspond
! 880: to the format string. [Patch by Bill Nottingham]
! 881:
! 882: 2004-07-05 Martin Mares <mj@ucw.cz>
! 883:
! 884: * Released as 2.1.99-test7.
! 885:
! 886: * lspci.c (config_fetch): Wanted to merge Matthew's bug fix, but
! 887: ended up with rewriting the fetching mechanism to be fully dynamic,
! 888: but avoid reading config space registers not explicitly requested.
! 889:
! 890: 2004-06-29 Matthew Wilcox <willy@debian.org>
! 891:
! 892: * lspci.c: More work on PCI Express dumping.
! 893:
! 894: * lib/header.h: Updated PCI Express capability definitions.
! 895:
! 896: * lib/proc.c (proc_read): Removed bogus warning.
! 897:
! 898: * common.c (xrealloc): Introduced.
! 899:
! 900: * lspci.man: Added -xxxx.
! 901:
! 902: 2004-06-27 Martin Mares <mj@ucw.cz>
! 903:
! 904: * Released as 2.1.99-test6.
! 905:
! 906: * lspci.c (show_msix), lib/header.h: Added dumping of MSI-X cap.
! 907: Patch by Roland Dreier <roland@topspin.com>, cleaned up by me.
! 908:
! 909: * lspci.c (show_pcix_nobridge, show_pcix_bridge): Handle config_fetch()
! 910: failures.
! 911:
! 912: * lib/header.h: Added PCI Express extended capabilities. Again by Matthew.
! 913:
! 914: * lspci.c (show_express): Added dumping of PCI Express cap.
! 915: Patch by Matthew Wilcox.
! 916:
! 917: * lib/header.h: Added a list of PCI 3.0 capabilities and also details
! 918: on PCI Express caps. Patch by Matthew Wilcox <willy@debian.org>.
! 919:
! 920: * lspci.c (check_root): Gone. No explicit checks for root are needed,
! 921: report correct errors reported by the libpci instead.
! 922:
! 923: * lspci.c: Added dumping of the extended config space on "-xxxx".
! 924: Better caching of config registers.
! 925:
! 926: * setpci.c (main): Allow access to whole 4096 bytes of the config space.
! 927:
! 928: * lib/sysfs.c, lib/proc.c: Don't print error messages on short reads,
! 929: just return the appropriate error code.
! 930:
! 931: * lib: Added support for extended (4096-byte) configuration space,
! 932: currently implemented only in Linux proc and sysfs access methods
! 933: and of course in the dump reader.
! 934:
! 935: 2004-05-29 Martin Mares <mj@ucw.cz>
! 936:
! 937: * Released as 2.1.99-test5.
! 938:
! 939: * lib/pci.h: Windows don't have the standard u_int* types.
! 940:
! 941: * lib/internal.h: <sys/param.h> required on Windows for endianity
! 942: macros.
! 943:
! 944: * lib/i386-ports.c: Connected i386-io-windows.h.
! 945:
! 946: * lspci.c (check_root): geteuid() is not available on Windows.
! 947:
! 948: * lib/i386-io-windows.h: Added Windows port contributed by Alexander
! 949: Stock <stock.alexander@gmx.de>.
! 950:
! 951: * lib/configure: Hopefully fixed SunOS port broken by various
! 952: changes to the configure script.
! 953:
! 954: * Makefile, lib/configure: Cross-compilation support, patch by Maciej.
! 955:
! 956: 2004-05-28 Martin Mares <mj@ucw.cz>
! 957:
! 958: * Released as 2.1.99-test4.
! 959:
! 960: * lspci.c (show_verbose): Header type 1 is probably legal for all
! 961: types of bridges, not only for PCI-to-PCI bridges.
! 962:
! 963: * lspci.c (format_agp_rate): Write "x16", not "x@".
! 964: (show_agp): rate[] could overflow.
! 965: Bugs reported by Jakub Bogusz <qboosh@pld-linux.org>.
! 966:
! 967: * lspci.c (show_ht_*): Show HyperTransport capability with all its
! 968: details. Once again code by Maciej simplified (i.e., possibly broken)
! 969: by me.
! 970:
! 971: * lib/header.h: Added declarations of HyperTransport capability.
! 972: Again thanks to Maciej.
! 973:
! 974: * lspci.c: Decode all bits of the secondary status word in type 1 headers.
! 975: Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl> for the patch.
! 976:
! 977: 2003-12-27 Martin Mares <mj@ucw.cz>
! 978:
! 979: * Released as 2.1.99-test3.
! 980:
! 981: * lspci.man, setpci.man: Document domains and correct spelling.
! 982:
! 983: * lib/dump.c (dump_init): Added ability to read domain numbers.
! 984:
! 985: * lspci.c: Devices in domains different from 0 have their slot number
! 986: printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains
! 987: as well.
! 988:
! 989: * lib/filter.c: Slot filters understand domains.
! 990:
! 991: * lib/generic.c: Mention the domain in slot numbers in all error messages.
! 992:
! 993: * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong.
! 994:
! 995: * lib/access.c (pci_get_dev): Added support for domains.
! 996:
! 997: * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config
! 998: registers (or to be precise, leave it for the generic parts of the pcilib
! 999: to do so) instead of reading them from the sysfs. It's faster this way.
! 1000:
! 1001: * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal
! 1002: variable. Better read it from the config registers (it's cached anyway).
! 1003:
! 1004: * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype.
! 1005: lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it.
! 1006: Saves lots of unnecessary file accesses.
! 1007:
! 1008: * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter
! 1009: is not supported by all C libraries.
! 1010:
! 1011: * Makefile: Always enter the lib directory (remember that we don't have
! 1012: full dependecies for the library in the top-level Makefile; hmmm, another
! 1013: thing to rewrite some day).
! 1014:
! 1015: * lib/sysfs.c: Added Linux sysfs access method based on the patch
! 1016: written by Matthew Wilcox <willy@fc.hp.com>.
! 1017:
! 1018: * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc".
! 1019:
! 1020: * lib/pread.h: The hacks to support pread on various versions
! 1021: of Linux libc moved there.
! 1022:
! 1023: * lib/proc.c (proc_setup): The return value of snprintf() varies
! 1024: between glibc versions, so we need to check both for a negative
! 1025: values and for too large values.
! 1026:
! 1027: * Removed last few references to the "Linux PCI Utilities", the
! 1028: package is pretty cross-platform now :)
! 1029:
! 1030: 2003-12-27 Martin Mares <mj@ucw.cz>
! 1031:
! 1032: * Released as 2.1.99-test2.
! 1033:
! 1034: * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the
! 1035: release scripts insert the current version. "make release" is gone.
! 1036:
! 1037: * maint/release, maint/release.pm: Added a new system of scripts for
! 1038: making releases including inter-version diffs etc.
! 1039:
! 1040: * Makefile: Cleaned up.
! 1041:
! 1042: * lib/fbsd-device.c: I patched another copy of this file by mistake,
! 1043: this time the version checks should be right.
! 1044:
! 1045: 2003-12-27 Martin Mares <mj@ucw.cz>
! 1046:
! 1047: * Released as 2.1.99-test1.
! 1048:
! 1049: * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h:
! 1050: Remove shadows of the syscall access method which was never
! 1051: implemented.
! 1052:
! 1053: * update-pciids.sh: Try to preserve permissions of the old file
! 1054: if chmod supports --reference. Should close Debian Bug #223740.
! 1055:
! 1056: * lib/proc.c (proc_setup): Increased path name length limit to 1024.
! 1057: Thanks for Redhat and Mandrake for inspiration.
! 1058:
! 1059: * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses.
! 1060: Grabbed from Redhat (Fedora) patches.
! 1061:
! 1062: 2003-12-27 Martin Mares <mj@ucw.cz>
! 1063:
! 1064: Merged bug fixes from Debian patches:
! 1065:
! 1066: * lspci.c (show_verbose): "Cache Line Size" should be capitalized.
! 1067:
! 1068: * lspci.c (show_pcix_nobridge): Added a missing newline.
! 1069:
! 1070: * lib/proc.c (proc_scan): When reading the header type, don't
! 1071: forget to clear the topmost bit indicating that the device has
! 1072: multiple functions.
! 1073:
! 1074: 2003-12-27 Martin Mares <mj@ucw.cz>
! 1075:
! 1076: Updated the FreeBSD port. Thanks to Samy Al Bahra <samy@kerneled.com>
! 1077: for the patches:
! 1078:
! 1079: * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
! 1080: * lib/fbsd-device.c: Select the right set of system includes according
! 1081: to __FreeBSD_version.
! 1082:
! 1083: 2003-12-27 Martin Mares <mj@ucw.cz>
! 1084:
! 1085: Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
! 1086: and cleaned up:
! 1087:
! 1088: * lib/configure: Recognize SunOS.
! 1089: * lib/internal.h: Learn how to recognize byte order on SunOS.
! 1090: * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
! 1091: * lib/i386-io-linux.h: Linux specific part.
! 1092: * lib/i386-io-hurd.h: GNU/Hurd specific part.
! 1093: * lib/i386-io-sunos.h: SunOS specific part.
! 1094:
! 1095: 2003-12-26 Martin Mares <mj@ucw.cz>
! 1096:
! 1097: * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
! 1098:
! 1099: * lib/pci.h: Types declared in <sys/types.h> should be usable on all
! 1100: platforms we currently support, so kill the forest of #ifdef's and
! 1101: use them in all cases.
! 1102:
! 1103: * lib/pci.h: Use ULONG_MASK to decide whether we should use long
! 1104: or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
! 1105: Define format strings for addresses, port numbers and IRQ numbers
! 1106: directly in pci.h.
! 1107:
! 1108: * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
! 1109:
! 1110: 2003-12-26 Marco Gerards <metgerards@student.han.nl>
! 1111:
! 1112: Added support for the GNU Hurd (cleaned up by Martin Mares):
! 1113:
! 1114: * lib/configure [GNU]: Use the i386 ports for configuration access.
! 1115: * lib/i386-ports.c: Don't call iopl() on the Hurd.
! 1116: * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
! 1117: u8 to u32.
! 1118:
! 1119: 2003-12-26 Martin Mares <mj@ucw.cz>
! 1120:
! 1121: * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
! 1122: config_fetch() to ensure that the registers have been read. Thanks to
! 1123: Bill Wood <bill.wood@hp.com> for the patch.
! 1124:
! 1125: * lspci.c: Ensure that failure of config_fetch() is handled correctly
! 1126: at all places.
! 1127:
! 1128: * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
! 1129: Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
! 1130:
! 1131: * setpci.c (main): Better error messages.
! 1132:
! 1133: * setpci.c (ex_op): The demo mode should disable only writing, not reading.
! 1134:
! 1135: * setpci.man: The documentation was inconsistent on what should -D do.
! 1136: Document the new behaviour.
! 1137:
! 1138: * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
! 1139: the GCC specific __attribute__((noreturn)) and killed the hack with
! 1140: redefining __attribute__ on non-GCC compilers.
! 1141:
! 1142: * Makefile: Added missing dependencies. Parallel builds work now.
! 1143: Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
! 1144: a different fix.
! 1145:
! 1146: * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
! 1147: command every time $(MANDIR) is referenced.
! 1148:
! 1149: * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
! 1150: a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
! 1151:
! 1152: * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
! 1153: Reported by Gary Parnes <gary_parnes@terago.com>.
! 1154:
! 1155: * Replaced obsolete syntax of __attribute__((unused)) in the middle of
! 1156: parameter declarations (which is no longer supported by GCC 3.1) by the
! 1157: current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
! 1158: for reporting this problem.
! 1159:
! 1160: * Removed CVS $Id$ tags from all files.
! 1161:
! 1162: * Makefile: Added some more warnings.
! 1163:
! 1164: * setpci.c: Cleaned up mask/value code.
! 1165:
! 1166: 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
! 1167:
! 1168: * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
! 1169:
! 1170: 2003-11-29 Martin Mares <mj@ucw.cz>
! 1171:
! 1172: * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
! 1173:
! 1174: 2003-01-04 Martin Mares <mj@ucw.cz>
! 1175:
! 1176: * Released as 2.1.11.
! 1177:
! 1178: * Makefile: Changed configuration of installation directories --
! 1179: all paths are now set at the top of the Makefile instead of being
! 1180: scattered between the installation rules. The default installation
! 1181: now goes always to /usr/local regardless of the OS as most distributions
! 1182: already contain some version of pciutils and we don't want custom
! 1183: installations to interfere with the default ones.
! 1184:
! 1185: * Makefile: Removed a couple of ancient install hacks: we no longer
! 1186: try to avoid overwriting a newer pci.ids file (users are now expected
! 1187: to use update-ids) and we don't try to remove /etc/pci.ids (a long time
! 1188: has passed since the last version which used it).
! 1189:
! 1190: * Makefile: Paths to pci.ids in man pages automatically get the right path.
! 1191:
! 1192: * Added the update-ids utility.
! 1193:
! 1194: * lib: Removed partially implemented "syscall" access method which will
! 1195: probably never be needed.
! 1196:
! 1197: 2002-12-27 Martin Mares <mj@ucw.cz>
! 1198:
! 1199: * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
! 1200:
! 1201: * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
! 1202: discontiguous numbering of functions. This is already present in the Linux
! 1203: kernel for several years, but I forgot to update pciutils as well.
! 1204:
! 1205: 2002-12-26 Martin Mares <mj@ucw.cz>
! 1206:
! 1207: * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
! 1208:
! 1209: * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
! 1210: there is no reason to prefer the kernel version.
! 1211:
! 1212: * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
! 1213:
! 1214: * Added preliminary version of NetBSD support by Quentin Garnier
! 1215: <netbsd@quatriemek.com>.
! 1216:
! 1217: 2002-04-06 Martin Mares <mj@ucw.cz>
! 1218:
! 1219: * lspci.c: Mention "-xxx" in the help.
! 1220:
! 1221: 2002-03-30 Martin Mares <mj@ucw.cz>
! 1222:
! 1223: * Released as 2.1.10.
! 1224:
! 1225: * Removed pci.ids from the CVS as they are now maintained separately.
! 1226: They are still included in the tarball, but if you are building pciutils
! 1227: from CVS sources or you want to get a newer ID file than the one distributed,
! 1228: just use "make update-ids" to download the most recent snapshot from
! 1229: pciids.sf.net.
! 1230:
! 1231: * Makefile, README: Updated accordingly.
! 1232:
! 1233: * Makefile: Added a couple of maintenance targets.
! 1234:
! 1235: * maint/*: Maintainer's utilities now reside here (present only in CVS,
! 1236: not in the tarball).
! 1237:
! 1238: * lib/names.c (parse_name_list): End-of-line comments are no longer
! 1239: supported. Hashes are now perfectly valid in all names and they start
! 1240: a comment only at the start of the line.
! 1241:
! 1242: 2002-03-26 Martin Mares <mj@ucw.cz>
! 1243:
! 1244: * README: Rewritten.
! 1245:
! 1246: * Makefile: When the currently installed pci.ids file is newer than
! 1247: the version to be installed, don't overwrite it. Suggested by
! 1248: Jean Delvare <khali@linux-fr.org>.
! 1249:
! 1250: 2002-03-24 Martin Mares <mj@ucw.cz>
! 1251:
! 1252: * lspci.c (show_pcix_bridge): Added PCI-X capability display.
! 1253: Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
! 1254:
! 1255: * lib/header.h: Added PCI-X stuff. Again by Jeff.
! 1256:
! 1257: * Makefile (CFLAGS): -Werror is gone.
! 1258:
! 1259: * lspci.c (format_agp_rate): Fixed AGP rate reporting.
! 1260:
! 1261: * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
! 1262: function 7.
! 1263:
! 1264: * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
! 1265: or device hexadecimally, don't confuse it with chip vendor/device ID.
! 1266: First reported by Marc Boucher <marc@mbsi.ca>.
! 1267:
! 1268: 2001-11-04 Martin Mares <mj@ucw.cz>
! 1269:
! 1270: * Released as 2.1.9.
! 1271:
! 1272: * pci.ids: Synced with the PCI ID Repository at SourceForge
! 1273: (http://pciids.sourceforge.net/).
! 1274:
! 1275: 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
! 1276:
! 1277: * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
! 1278:
! 1279: 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
! 1280:
! 1281: * Makefile (uninstall): Fixed.
! 1282:
! 1283: * pci.ids: ID updates.
! 1284:
! 1285: 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
! 1286:
! 1287: * Released as 2.1.8.
! 1288:
! 1289: * pci.ids: ID updates.
! 1290:
! 1291: * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
! 1292:
! 1293: 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
! 1294:
! 1295: * lspci.c (show_verbose): If the header type doesn't match device
! 1296: class, just print a warning and still use the header type, assuming
! 1297: bogus class info.
! 1298:
! 1299: 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
! 1300:
! 1301: * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
! 1302:
! 1303: * pci.ids: Updated Contemporary Control ARCnet card entries.
! 1304:
! 1305: * pci.ids: Synchronized class list with latest PCI SIG documents.
! 1306:
! 1307: 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
! 1308:
! 1309: * lib/names.c (pci_lookup_name): Fixed the cheat.
! 1310:
! 1311: * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
! 1312:
! 1313: * pci.ids: Various ID updates.
! 1314:
! 1315: 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
! 1316:
! 1317: * Released as 2.1.7.
! 1318:
! 1319: * pciutils.spec: Added German description.
! 1320:
! 1321: * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
! 1322: are the same as device ID and just output subsystem name according to
! 1323: device name.
! 1324:
! 1325: * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
! 1326:
! 1327: * lib/pci.h: Added the correct typedefs for AIX.
! 1328:
! 1329: * lib/generic.c (pci_generic_scan_bus): Export.
! 1330:
! 1331: * lib/configure: Detect AIX. Use "echo '...\c'" instead of
! 1332: "echo -n" if the shell isn't bash.
! 1333:
! 1334: * lspci.c: Avoid using alloca() if not compiled by GCC.
! 1335: (insert_dev): Avoid returning a void value.
! 1336:
! 1337: * Makefile: Choose which install utility to use according to
! 1338: OS type. Also use `-o' instead of `-or' in find arguments.
! 1339: Part of the AIX port.
! 1340:
! 1341: * lib/aix-device.c: Added AIX low-level interface. Contributed
! 1342: by Dave Johnson <ddj@brown.edu>, thanks a lot!
! 1343:
! 1344: * pci.ids: Few new ID's.
! 1345:
! 1346: * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
! 1347: when not compiled by GCC.
! 1348:
! 1349: 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
! 1350:
! 1351: * Released as 2.1.6.
! 1352:
! 1353: * pci.ids: Added a large batch of ID's contributed by Gunther
! 1354: Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
! 1355: list with the 2.3.99pre6 kernel.
! 1356:
! 1357: Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
! 1358:
! 1359: * lib/example.c: Added a simple example of how to use
! 1360: the library.
! 1361:
! 1362: * lspci.man, setpci.man: Revealed --version. Well spotted
! 1363: by Adam Sulmicki.
! 1364:
! 1365: * pci.ids: Added lots of new ID's and synced with 2.3.50.
! 1366:
! 1367: Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
! 1368:
! 1369: * Released as 2.1.5.
! 1370:
! 1371: * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
! 1372: %{_mandir} to find the right location to install manual pages to.
! 1373:
! 1374: * pci.ids: New ID's.
! 1375:
! 1376: * setpci.c (main): Don't crash when `-s' or `-d' is given with
! 1377: no argument.
! 1378:
! 1379: Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
! 1380:
! 1381: * lib/i386-ports.c: Include <asm/io.h> only on systems without
! 1382: glibc.
! 1383:
! 1384: Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
! 1385:
! 1386: * Makefile: Modified to work with the Linux FHS brain-damaged idea
! 1387: of putting man pages to /usr/share/man. Now we choose either /usr/man
! 1388: or /usr/share/man depending on which one exists.
! 1389:
! 1390: Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
! 1391:
! 1392: * pci.ids: Synced with Linux 2.3.40.
! 1393:
! 1394: * Released as version 2.1.4.
! 1395:
! 1396: Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
! 1397:
! 1398: * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
! 1399:
! 1400: * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
! 1401:
! 1402: * lspci.c (format_agp_rate): Better formatting of AGP rates.
! 1403:
! 1404: * pci.ids: New ID's.
! 1405:
! 1406: * lib/configure: Added configuration for ia64 (the same as for Alpha).
! 1407: Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
! 1408:
! 1409: Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
! 1410:
! 1411: * Released as version 2.1.3.
! 1412:
! 1413: * pci.ids: New ID's.
! 1414:
! 1415: * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
! 1416:
! 1417: * lib/access.c: Corrected order of access methods -- it's wonderful how
! 1418: long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
! 1419:
! 1420: Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
! 1421:
! 1422: * Released as version 2.1.2.
! 1423:
! 1424: * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
! 1425:
! 1426: Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
! 1427:
! 1428: * Released as version 2.1.1.
! 1429:
! 1430: * pci.ids: Several new ID's.
! 1431:
! 1432: * setpci.c (exec_op): Don't forget to increment address after writing
! 1433: single value, so that `30.b=12,34,56,78' works as expected. Reported
! 1434: by Petr Soucek <petr@ryston.cz>.
! 1435:
! 1436: Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
! 1437:
! 1438: * lspci.c (show_terse): If prog-if is zero, but it's present in the
! 1439: ID list, show it.
! 1440:
! 1441: Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
! 1442:
! 1443: * Released as version 2.1.
! 1444:
! 1445: * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
! 1446: lots of contributed entries.
! 1447:
! 1448: Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
! 1449:
! 1450: * pci.ids: Added lots of subsystem definitions.
! 1451:
! 1452: Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
! 1453:
! 1454: * setpci.man: Better example.
! 1455:
! 1456: * lspci.c: Resolve prog-if names.
! 1457:
! 1458: * lib/names.c: Adapted to new pci.ids syntax.
! 1459:
! 1460: * pci.ids: Reorganized the pci.ids file. Subsystems are listed
! 1461: under devices, classes can optionally contain prog-if information.
! 1462: New ID's, as usually.
! 1463:
! 1464: Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
! 1465:
! 1466: * pci.ids: New ID's. As usually.
! 1467:
! 1468: * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
! 1469: unless we're vvvery verbose.
! 1470:
! 1471: Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
! 1472:
! 1473: * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
! 1474:
! 1475: Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
! 1476:
! 1477: * pci.ids: New ID's. Again.
! 1478:
! 1479: Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
! 1480:
! 1481: * lspci.c (show_size): Don't show size if it's zero (usually
! 1482: due to bus-centric mode being enabled).
! 1483:
! 1484: Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
! 1485:
! 1486: * lib/pci.h: Types are OS dependent.
! 1487:
! 1488: * lib/internal.h: Byte order hacks are OS dependent.
! 1489:
! 1490: * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
! 1491:
! 1492: * lib/Makefile, lib/access.c: Added fbsd-device target.
! 1493:
! 1494: * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
! 1495: incorrectly set to device ID.
! 1496:
! 1497: * README: Added a note that we support FreeBSD.
! 1498:
! 1499: * Makefile (PREFIX, ROOT): Set it depending on the OS.
! 1500: (%.8): Grrr, BSD date is not able to convert date formats the same way
! 1501: as GNU date does. Use sed instead.
! 1502: (install): Use `-c' when calling install.
! 1503:
! 1504: * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
! 1505: by Jari Kirma <kirma@cs.hut.fi>.
! 1506:
! 1507: * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
! 1508: and pwrite only when we are certain it's safe (i.e., glibc 2.1
! 1509: on all architectures or any libc on a i386 where we really know
! 1510: how to use syscalls directly). In all other cases, emulate it
! 1511: with lseek/read/write.
! 1512:
! 1513: * pci.ids: Some more IDs.
! 1514:
! 1515: Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
! 1516:
! 1517: * pci.ids: Added IDs of parallel port controller cards as sent
! 1518: by Tim Waugh <tim@cyberelk.demon.co.uk>.
! 1519:
! 1520: Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
! 1521:
! 1522: * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
! 1523:
! 1524: * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
! 1525: HAVE_LONG_ADDRESS.
! 1526:
! 1527: * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
! 1528: are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
! 1529: to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
! 1530: and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
! 1531: on Alpha.
! 1532:
! 1533: * lspci.c (show_msi): Added dumping of the MSI capability.
! 1534: (show_slotid): The same for SlotID capability.
! 1535: (show_caps): Seperated capability dumping, because it should
! 1536: be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
! 1537: layout of htype2, so I'm a bit unsure about it wrt capabilities
! 1538: -- they at least have to live somewhere else since address 0x34
! 1539: is already defined differently in htype2.
! 1540:
! 1541: * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
! 1542: (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
! 1543: (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
! 1544:
! 1545: * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
! 1546: (required by the PCI 2.2 specs).
! 1547:
! 1548: Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
! 1549:
! 1550: * lspci.c (show_size): Added new function for dumping of region sizes.
! 1551: (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
! 1552: ROMs et cetera.
! 1553:
! 1554: * lib/pci.h (struct pci_dev): known_fields moved to the public part
! 1555: of the structure.
! 1556:
! 1557: * Added support for region sizes. Needs support in the kernel, because
! 1558: sizes have to be scanned before drivers initialize yourself. pci_fill_info()
! 1559: now returns a bitmask of what fields were really read.
! 1560:
! 1561: Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
! 1562:
! 1563: * Makefile:
! 1564: Added `uninstall' target - removes all traces of pciutils.
! 1565: * pci.ids:
! 1566: - Lots of cleanups in the ATI, S3, Adaptec vendors.
! 1567: - Changed Compaq QVision 1280/p definitions, as it's not possible
! 1568: to determine the revision from the device ID.
! 1569: - Same for the Tseng ET4000.
! 1570: The id's said I had a rev C, when it was actually a rev B.
! 1571: - Removed some unnecessary strings
! 1572: `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
! 1573: `Ethernet card'. This should be determined from config space.
! 1574: - Lots of other new vendors & devices
! 1575: - Other additional small cleanups.
! 1576:
! 1577: Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
! 1578:
! 1579: * lib/names.c (pci_lookup_name): When device ID lookup
! 1580: fails, return hexadecimal device ID instead of vendor ID.
! 1581: Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
! 1582: I've just extended the fix to subsystem ID's.
! 1583:
! 1584: Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
! 1585:
! 1586: * lspci.c (show_agp): Bug fix from Petr Vandrovec
! 1587: <vandrove@vc.cvut.cz>. The command register was displayed
! 1588: incorrectly.
! 1589:
! 1590: Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
! 1591:
! 1592: * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
! 1593: numbers if not supplied by the libc.
! 1594:
! 1595: Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
! 1596:
! 1597: * Released the whole package as version 2.0.
! 1598:
! 1599: Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
! 1600:
! 1601: * pci.ids: Added several new ID's contributed by people
! 1602: on the linux-pci list.
! 1603:
! 1604: Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
! 1605:
! 1606: * lspci.c: Display I/O addresses correctly on sparc64.
! 1607: * lib/header.h: Ditto.
! 1608:
! 1609: * lib/configure: On sparc set HAVE_64BIT* as well, we want
! 1610: a binary which works on both 32bit and 64bit SPARCs.
! 1611:
! 1612: Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
! 1613:
! 1614: * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
! 1615: <mjacob@feral.com>.
! 1616:
! 1617: * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
! 1618:
! 1619: Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
! 1620:
! 1621: * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
! 1622: as a multi-function device, because several single-function devices
! 1623: don't decode the function bits at all.
! 1624:
! 1625: Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
! 1626:
! 1627: * Makefile (install): Don't use "-o root -g root" for installation
! 1628: since it breaks on machines where programs are not installed by root.
! 1629: Reported by Richard Gooch <rgooch@atnf.csiro.au>
! 1630:
! 1631: Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
! 1632:
! 1633: * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
! 1634:
! 1635: * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
! 1636: or 64-bit depending on CPU.
! 1637:
! 1638: * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
! 1639: according to bus address width.
! 1640:
! 1641: Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
! 1642:
! 1643: * Released as 1.99.4.
! 1644:
! 1645: * lspci.c: Capability list parser now recognizes both AGP
! 1646: registers and PCI Power Management registers (the latter
! 1647: is mainly guesswork based on DEC/Intel 21153 bridge specs
! 1648: since I don't have the PCI Power Management document).
! 1649:
! 1650: * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
! 1651: by FLAG macro.
! 1652:
! 1653: * lspci.c: Added bridge checks to bus mapping code.
! 1654:
! 1655: Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
! 1656:
! 1657: * lspci.c: Implemented bus mapping mode (-M).
! 1658:
! 1659: * lspci.c (scan_devices): Split to scan_devices() and scan_device().
! 1660: (show): Split to show() and show_device().
! 1661:
! 1662: * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
! 1663: set it to the real access method afterwards.
! 1664:
! 1665: Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
! 1666:
! 1667: * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
! 1668: don't check PCI_COMMAND for I/O and memory enables.
! 1669:
! 1670: Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
! 1671:
! 1672: * Makefile: Added target `release' which substitutes new version
! 1673: number to .spec, .lsm and README. Also rewrote target `dist'.
! 1674:
! 1675: * Released as 1.99.3.
! 1676:
! 1677: Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
! 1678:
! 1679: * lib/header.h: Until kernel adopts new layout of PCI
! 1680: includes (i.e., separate declaration of header structure,
! 1681: functions and device IDs), which is not going to happen
! 1682: before 2.3, we'll use our own definiton of the header.
! 1683:
! 1684: * lspci.c (show_verbose): Display `Cap' flag in device status.
! 1685:
! 1686: * lspci.c (show_htype0): Display capability lists whereever
! 1687: available. The only capability name we recognize now is `AGP'.
! 1688: Unfortunately, capabilities are stored in device-dependent
! 1689: portion of the configuration space and are thus available
! 1690: only to root unless you read a dump.
! 1691:
! 1692: * lspci.c (scan_devices): Use cache instead of buffering.
! 1693:
! 1694: * lib/buffer.c: Removed (obsoleted by the cache).
! 1695:
! 1696: * lib/access.c: Added general caching mechanism.
! 1697:
! 1698: Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
! 1699:
! 1700: * pci.ids: Added few devices.
! 1701:
! 1702: Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
! 1703:
! 1704: * Version string is now defined in top-level Makefile, exported
! 1705: to the configure script and also substituted to man pages.
! 1706:
! 1707: * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
! 1708: (show_verbose): Rewrote interrupt display logic.
! 1709:
! 1710: * lib/i386-ports.c: Include sys/io.h only on glibc systems.
! 1711:
! 1712: * lib/configure: Rewrote detection of Linux versions. Now it
! 1713: works on 2.0 kernels (only with direct/dump access, of course).
! 1714:
! 1715: * lib/internal.h: New bytesex macros using <asm/byteorder.h>
! 1716: whenever available.
! 1717:
! 1718: * lib/proc.c (proc_read, proc_write): Distinguish between short
! 1719: read/write and real errors.
! 1720:
! 1721: * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
! 1722: libpci respects buscentric mode automatically.
! 1723:
! 1724: * lspci.c (show_hex_dump): For CardBus bridges, print out 128
! 1725: bytes of header (the whole standard part).
! 1726:
! 1727: * common.c: pcilib options are now all uppercase. Also moved
! 1728: PCI access debugging option here.
! 1729:
! 1730: * Released as 1.99.2.
! 1731:
! 1732: Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
! 1733:
! 1734: * Wrote configure script and rewrote Makefiles.
! 1735:
! 1736: * Removed few unused variables.
! 1737:
! 1738: Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
! 1739:
! 1740: * common.c: Moved several functions used in both setpci and lspci
! 1741: here. This includes parsing of libpci-related options.
! 1742:
! 1743: * More library tweaks.
! 1744:
! 1745: * filter.c, names.c: Moved to library.
! 1746:
! 1747: * setpci: Rewritten to use the library.
! 1748:
! 1749: * Released as 1.99.1.
! 1750:
! 1751: Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
! 1752:
! 1753: * lspci.c (scan_devices): For cardbus bridges, read first 128
! 1754: bytes of config space to get full standard header.
! 1755:
! 1756: * Makefile (CFLAGS): Removed "-Wno-unused".
! 1757:
! 1758: * Started the "New Generation" branch and introduced the
! 1759: PCI library.
! 1760:
! 1761: * lspci: Rewritten to use the library.
! 1762:
! 1763: Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
! 1764:
! 1765: * Released as version 1.10.
! 1766:
! 1767: Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
! 1768:
! 1769: * lspci.8, setpci.8: Miscellaneous fixes as suggested by
! 1770: Dag Wieers <dag@digibel.be>.
! 1771:
! 1772: Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
! 1773:
! 1774: * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
! 1775:
! 1776: Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
! 1777:
! 1778: * Makefile, pciutils.h: Moved pci.ids to /usr/share.
! 1779:
! 1780: * Released as version 1.09.
! 1781:
! 1782: Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
! 1783:
! 1784: * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
! 1785: bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
! 1786:
! 1787: Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
! 1788:
! 1789: * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
! 1790:
! 1791: Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
! 1792:
! 1793: * Released as version 1.08.
! 1794:
! 1795: * setpci.c: glibc 2.1.x already defines pread() and pwrite().
! 1796:
! 1797: * lspci.8: Changed warning about lspci -xxx.
! 1798:
! 1799: * lspci.c: Require "-xxx" for full configuration space dump, so that
! 1800: it's impossible to crash the machine by single typo.
! 1801:
! 1802: * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
! 1803:
! 1804: Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
! 1805:
! 1806: * lspci.c (show_bases): Better displaying of unassigned and
! 1807: disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
! 1808: for an idea.
! 1809:
! 1810: Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
! 1811:
! 1812: * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
! 1813: (thanks to Geert Uytterhoeven for finding this out)
! 1814:
! 1815: Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
! 1816:
! 1817: * lspci.c (show_verbose): Print subsystem ID using the new resolver.
! 1818: (show_machine): Print subsystem ID.
! 1819:
! 1820: * names.c: New name resolution engine supporting subsystem IDs.
! 1821:
! 1822: * Released as version 1.07.
! 1823:
! 1824: Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
! 1825:
! 1826: * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
! 1827: (show_bases): Honor the `cnt' argument.
! 1828: (grow_tree): Parse CardBus headers in tree mode as well.
! 1829:
! 1830: * pci.h: Updated CardBus header field description. I still don't
! 1831: have the CardBus standard available, but OZ6832 specs contain
! 1832: full description of all header fields supported by the chip.
! 1833:
! 1834: Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
! 1835:
! 1836: * Released as 1.06.
! 1837:
! 1838: * names.c (parse_name_list): Killed an unused variable.
! 1839:
! 1840: * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
! 1841: if they are not defined by glibc (needed for glibc built on older
! 1842: kernels). Ugly.
! 1843:
! 1844: * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
! 1845:
! 1846: Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
! 1847:
! 1848: * Released as 1.05.
! 1849:
! 1850: * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
! 1851: should be gone. Again thanks to Steve for bug report.
! 1852:
! 1853: * filter.c (filter_parse_slot): Fixed ":x" type filters.
! 1854:
! 1855: * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
! 1856: <steve@icarus.com> for reporting this.
! 1857:
! 1858: Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
! 1859:
! 1860: * lspci.c (main), setpci.c (main): Implemented "--version".
! 1861:
! 1862: * Released as 1.04.
! 1863:
! 1864: * pciutils.h (PCIUTILS_VERSION): Added version string.
! 1865:
! 1866: * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
! 1867: Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
! 1868: for bug report.
! 1869:
! 1870: Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
! 1871:
! 1872: * pci.ids: More updates from Jens Maurer.
! 1873:
! 1874: Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
! 1875:
! 1876: * pci.ids: Updates from Jens Maurer.
! 1877:
! 1878: Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
! 1879:
! 1880: * Released as 1.03.
! 1881:
! 1882: * setpci.8: Written.
! 1883:
! 1884: * setpci.c: Finished.
! 1885:
! 1886: * lspci.c: Now able to fetch expansion ROM base from kernel device list
! 1887: and print it if not in buscentric mode.
! 1888:
! 1889: Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
! 1890:
! 1891: * setpci.c: Added.
! 1892:
! 1893: Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
! 1894:
! 1895: * lspci.8: Updated the documentation.
! 1896:
! 1897: * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
! 1898:
! 1899: * filter.c: Introduced new generic device filter.
! 1900:
! 1901: Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
! 1902:
! 1903: * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
! 1904: of PCI-to-PCI bridges in the tree format.
! 1905:
! 1906: Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
! 1907:
! 1908: * lspci.c (show_machine): Added non-verbose mode of machine-readable
! 1909: dump.
! 1910:
! 1911: * pci.ids: Updates from Jens Maurer.
! 1912:
! 1913: * Released as version 1.02.
! 1914:
! 1915: Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
! 1916:
! 1917: * lspci.c: Added a "-m" switch for dumping machine-readable
! 1918: configuration data (requested by Bjoern Kriews <bkr@cut.de>).
! 1919:
! 1920: Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
! 1921:
! 1922: * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
! 1923: if available. This should avoid all problems with official kernel
! 1924: not synchronized to newer PCI code in CVS -- standard distribution
! 1925: of pciutils now contains pci.h from current CVS kernel, pciutils
! 1926: in CVS contain no pci.h and use the correct kernel include.
! 1927:
! 1928: * Makefile: Fixed installation path for man pages.
! 1929:
! 1930: Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
! 1931:
! 1932: * README: Updated.
! 1933:
! 1934: * lspci.8: Created a man page.
! 1935:
! 1936: * Releasing as version 1.0.
! 1937:
! 1938: Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
! 1939:
! 1940: * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
! 1941: to all the C sources. This should eliminate problems with 32-bit compilers
! 1942: on sparc64.
! 1943:
! 1944: * lspci.c (show_verbose): Recognize CardBus bridge header type.
! 1945: (show_htype2): Stub routine.
! 1946: (scan_config): Write sensible error message if the kernel denies reading of
! 1947: upper part of the PCI config space.
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ChangeLog CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / pciutils