|
version 1.1, 2012/02/21 23:05:51
|
version 1.1.1.4, 2013/07/22 08:25:55
|
|
Line 1
|
Line 1
|
| #! /bin/sh |
#! /bin/sh |
| |
|
| |
############################################################################### |
| # Run the PCRE tests using the pcretest program. The appropriate tests are |
# Run the PCRE tests using the pcretest program. The appropriate tests are |
| # selected, depending on which build-time options were used. |
# selected, depending on which build-time options were used. |
| # |
| # All tests are now run both with and without -s, to ensure that everything is |
# All tests are now run both with and without -s, to ensure that everything is |
| # tested with and without studying. However, there are some tests that produce |
# tested with and without studying. However, there are some tests that produce |
| # different output after studying, typically when we are tracing the actual |
# different output after studying, typically when we are tracing the actual |
|
Line 12
|
Line 13
|
| # any difference to their output. There is also one test which compiles invalid |
# any difference to their output. There is also one test which compiles invalid |
| # UTF-8 with the UTF-8 check turned off; for this, studying must also be |
# UTF-8 with the UTF-8 check turned off; for this, studying must also be |
| # disabled with /SS. |
# disabled with /SS. |
| # |
| # When JIT support is available, all the tests are also run with -s+ to test |
# When JIT support is available, all the tests are also run with -s+ to test |
| # (again, almost) everything with studying and the JIT option. There are also | # (again, almost) everything with studying and the JIT option, unless "nojit" |
| # two tests for JIT-specific features, one to be run when JIT support is | # is given on the command line. There are also two tests for JIT-specific |
| # available, and one when it is not. | # features, one to be run when JIT support is available (unless "nojit" is |
| | # specified), and one when it is not. |
| | # |
| | # Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also |
| | # possible to select which to test by giving "-8", "-16" or "-32" on the |
| | # command line. |
| | # |
| | # As well as "nojit", "-8", "-16", and "-32", arguments for this script are |
| | # individual test numbers, ranges of tests such as 3-6 or 3- (meaning 3 to the |
| | # end), or a number preceded by ~ to exclude a test. For example, "3-15 ~10" |
| | # runs tests 3 to 15, excluding test 10, and just "~10" runs all the tests |
| | # except test 10. Whatever order the arguments are in, the tests are always run |
| | # in numerical order. |
| |
|
| # The arguments for this script can be individual test numbers, or the word | # Other arguments can be one of the words "valgrind", "valgrind-log", or "sim" |
| # "valgrind", or "sim" followed by an argument to run cross-compiled | # followed by an argument to run cross- compiled executables under a simulator, |
| # executables under a simulator, for example: | # for example: |
| # |
# |
| # RunTest 3 sim "qemu-arm -s 8388608" |
# RunTest 3 sim "qemu-arm -s 8388608" |
| |
# |
| |
# There are two special cases where only one argument is allowed: |
| |
# |
| |
# If the first and only argument is "ebcdic", the script runs the special |
| |
# EBCDIC test that can be useful for checking certain EBCDIC features, even |
| |
# when run in an ASCII environment. |
| |
# |
| |
# If the script is obeyed as "RunTest list", a list of available tests is |
| |
# output, but none of them are run. |
| |
############################################################################### |
| |
|
| valgrind= | # Define test titles in variables so that they can be output as a list. Some |
| | # of them are modified (e.g. with -8 or -16) when used in the actual tests. |
| | |
| | title1="Test 1: Main functionality (Compatible with Perl >= 5.10)" |
| | title2="Test 2: API, errors, internals, and non-Perl stuff" |
| | title3="Test 3: Locale-specific features" |
| | title4A="Test 4: UTF" |
| | title4B=" support (Compatible with Perl >= 5.10)" |
| | title5="Test 5: API, internals, and non-Perl stuff for UTF" |
| | title6="Test 6: Unicode property support (Compatible with Perl >= 5.10)" |
| | title7="Test 7: API, internals, and non-Perl stuff for Unicode property support" |
| | title8="Test 8: DFA matching main functionality" |
| | title9="Test 9: DFA matching with UTF" |
| | title10="Test 10: DFA matching with Unicode properties" |
| | title11="Test 11: Internal offsets and code size tests" |
| | title12="Test 12: JIT-specific features (JIT available)" |
| | title13="Test 13: JIT-specific features (JIT not available)" |
| | title14="Test 14: Specials for the basic 8-bit library" |
| | title15="Test 15: Specials for the 8-bit library with UTF-8 support" |
| | title16="Test 16: Specials for the 8-bit library with Unicode propery support" |
| | title17="Test 17: Specials for the basic 16/32-bit library" |
| | title18="Test 18: Specials for the 16/32-bit library with UTF-16/32 support" |
| | title19="Test 19: Specials for the 16/32-bit library with Unicode property support" |
| | title20="Test 20: DFA specials for the basic 16/32-bit library" |
| | title21="Test 21: Reloads for the basic 16/32-bit library" |
| | title22="Test 22: Reloads for the 16/32-bit library with UTF-16/32 support" |
| | title23="Test 23: Specials for the 16-bit library" |
| | title24="Test 24: Specials for the 16-bit library with UTF-16 support" |
| | title25="Test 25: Specials for the 32-bit library" |
| | title26="Test 26: Specials for the 32-bit library with UTF-32 support" |
| | |
| | maxtest=26 |
| | |
| | if [ $# -eq 1 -a "$1" = "list" ]; then |
| | echo $title1 |
| | echo $title2 "(not UTF)" |
| | echo $title3 |
| | echo $title4A $title4B |
| | echo $title5 support |
| | echo $title6 |
| | echo $title7 |
| | echo $title8 |
| | echo $title9 |
| | echo $title10 |
| | echo $title11 |
| | echo $title12 |
| | echo $title13 |
| | echo $title14 |
| | echo $title15 |
| | echo $title16 |
| | echo $title17 |
| | echo $title18 |
| | echo $title19 |
| | echo $title20 |
| | echo $title21 |
| | echo $title22 |
| | echo $title23 |
| | echo $title24 |
| | echo $title25 |
| | echo $title26 |
| | exit 0 |
| | fi |
| | |
| | # Set up a suitable "diff" command for comparison. Some systems |
| | # have a diff that lacks a -u option. Try to deal with this. |
| | |
| | cf="diff" |
| | diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u" |
| | |
| | # Find the test data |
| | |
| | if [ -n "$srcdir" -a -d "$srcdir" ] ; then |
| | testdata="$srcdir/testdata" |
| | elif [ -d "./testdata" ] ; then |
| | testdata=./testdata |
| | elif [ -d "../testdata" ] ; then |
| | testdata=../testdata |
| | else |
| | echo "Cannot find the testdata directory" |
| | exit 1 |
| | fi |
| | |
| | |
| | # ------ Special EBCDIC Test ------- |
| | |
| | if [ $# -eq 1 -a "$1" = "ebcdic" ]; then |
| | ./pcretest -C ebcdic >/dev/null |
| | ebcdic=$? |
| | if [ $ebcdic -ne 1 ] ; then |
| | echo "Cannot run EBCDIC tests: EBCDIC support not compiled" |
| | exit 1 |
| | fi |
| | |
| | for opt in "" "-s" "-dfa" "-s -dfa"; do |
| | ./pcretest -q $opt $testdata/testinputEBC >testtry |
| | if [ $? = 0 ] ; then |
| | $cf $testdata/testoutputEBC testtry |
| | if [ $? != 0 ] ; then exit 1; fi |
| | else exit 1 |
| | fi |
| | if [ "$opt" = "-s" ] ; then echo " OK with study" |
| | elif [ "$opt" = "-dfa" ] ; then echo " OK using DFA" |
| | elif [ "$opt" = "-s -dfa" ] ; then echo " OK using DFA with study" |
| | else echo " OK" |
| | fi |
| | done |
| | |
| | exit 0 |
| | fi |
| | |
| | |
| | # ------ Normal Tests ------ |
| | |
| | # Default values |
| | |
| | arg8= |
| | arg16= |
| | arg32= |
| | nojit= |
| sim= |
sim= |
| |
skip= |
| |
valgrind= |
| |
|
| # Select which tests to run; for those that are explicitly requested, check | # This is in case the caller has set aliases (as I do - PH) |
| # that the necessary optional facilities are available. | unset cp ls mv rm |
| |
|
| |
# Process options and select which tests to run; for those that are explicitly |
| |
# requested, check that the necessary optional facilities are available. |
| |
|
| do1=no |
do1=no |
| do2=no |
do2=no |
| do3=no |
do3=no |
|
Line 45 do12=no
|
Line 191 do12=no
|
| do13=no |
do13=no |
| do14=no |
do14=no |
| do15=no |
do15=no |
| |
do16=no |
| |
do17=no |
| |
do18=no |
| |
do19=no |
| |
do20=no |
| |
do21=no |
| |
do22=no |
| |
do23=no |
| |
do24=no |
| |
do25=no |
| |
do26=no |
| |
|
| while [ $# -gt 0 ] ; do |
while [ $# -gt 0 ] ; do |
| case $1 in |
case $1 in |
|
Line 63 while [ $# -gt 0 ] ; do
|
Line 220 while [ $# -gt 0 ] ; do
|
| 13) do13=yes;; |
13) do13=yes;; |
| 14) do14=yes;; |
14) do14=yes;; |
| 15) do15=yes;; |
15) do15=yes;; |
| valgrind) valgrind="valgrind -q --smc-check=all";; | 16) do16=yes;; |
| | 17) do17=yes;; |
| | 18) do18=yes;; |
| | 19) do19=yes;; |
| | 20) do20=yes;; |
| | 21) do21=yes;; |
| | 22) do22=yes;; |
| | 23) do23=yes;; |
| | 24) do24=yes;; |
| | 25) do25=yes;; |
| | 26) do26=yes;; |
| | -8) arg8=yes;; |
| | -16) arg16=yes;; |
| | -32) arg32=yes;; |
| | nojit) nojit=yes;; |
| sim) shift; sim=$1;; |
sim) shift; sim=$1;; |
| *) echo "Unknown test number $1"; exit 1;; | valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all";; |
| | valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";; |
| | ~*) |
| | if expr "$1" : '~[0-9][0-9]*$' >/dev/null; then |
| | skip="$skip `expr "$1" : '~\([0-9]*\)*$'`" |
| | else |
| | echo "Unknown option or test selector '$1'"; exit 1 |
| | fi |
| | ;; |
| | *-*) |
| | if expr "$1" : '[0-9][0-9]*-[0-9]*$' >/dev/null; then |
| | tf=`expr "$1" : '\([0-9]*\)'` |
| | tt=`expr "$1" : '.*-\([0-9]*\)'` |
| | if [ "$tt" = "" ] ; then tt=$maxtest; fi |
| | if expr \( "$tf" "<" 1 \) \| \( "$tt" ">" "$maxtest" \) >/dev/null; then |
| | echo "Invalid test range '$1'"; exit 1 |
| | fi |
| | while expr "$tf" "<=" "$tt" >/dev/null; do |
| | eval do${tf}=yes |
| | tf=`expr $tf + 1` |
| | done |
| | else |
| | echo "Invalid test range '$1'"; exit 1 |
| | fi |
| | ;; |
| | *) echo "Unknown option or test selector '$1'"; exit 1;; |
| esac |
esac |
| shift |
shift |
| done |
done |
| |
|
| # Set up a suitable "diff" command for comparison. Some systems | # Find which optional facilities are available. |
| # have a diff that lacks a -u option. Try to deal with this. | |
| |
|
| if diff -u /dev/null /dev/null; then cf="diff -u"; else cf="diff"; fi | $sim ./pcretest -C linksize >/dev/null |
| | link_size=$? |
| | if [ $link_size -lt 2 ] ; then |
| | echo "Failed to find internal link size" |
| | exit 1 |
| | fi |
| | if [ $link_size -gt 4 ] ; then |
| | echo "Failed to find internal link size" |
| | exit 1 |
| | fi |
| |
|
| # Find the test data | # All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only |
| | # one need be. |
| |
|
| if [ -n "$srcdir" -a -d "$srcdir" ] ; then | $sim ./pcretest -C pcre8 >/dev/null |
| testdata="$srcdir/testdata" | support8=$? |
| elif [ -d "./testdata" ] ; then | $sim ./pcretest -C pcre16 >/dev/null |
| testdata=./testdata | support16=$? |
| elif [ -d "../testdata" ] ; then | $sim ./pcretest -C pcre32 >/dev/null |
| testdata=../testdata | support32=$? |
| | |
| | # Initialize all bitsizes skipped |
| | |
| | test8=skip |
| | test16=skip |
| | test32=skip |
| | |
| | # If no bitsize arguments, select all that are available |
| | |
| | if [ "$arg8$arg16$arg32" = "" ] ; then |
| | if [ $support8 -ne 0 ] ; then |
| | test8= |
| | fi |
| | if [ $support16 -ne 0 ] ; then |
| | test16=-16 |
| | fi |
| | if [ $support32 -ne 0 ] ; then |
| | test32=-32 |
| | fi |
| | |
| | # Select requested bit sizes |
| | |
| else |
else |
| echo "Cannot find the testdata directory" | if [ "$arg8" = yes ] ; then |
| exit 1 | if [ $support8 -eq 0 ] ; then |
| | echo "Cannot run 8-bit library tests: 8-bit library not compiled" |
| | exit 1 |
| | fi |
| | test8= |
| | fi |
| | if [ "$arg16" = yes ] ; then |
| | if [ $support16 -eq 0 ] ; then |
| | echo "Cannot run 16-bit library tests: 16-bit library not compiled" |
| | exit 1 |
| | fi |
| | test16=-16 |
| | fi |
| | if [ "$arg32" = yes ] ; then |
| | if [ $support32 -eq 0 ] ; then |
| | echo "Cannot run 32-bit library tests: 32-bit library not compiled" |
| | exit 1 |
| | fi |
| | test32=-32 |
| | fi |
| fi |
fi |
| |
|
| # Find which optional facilities are available. In some Windows environments | # UTF support always applies to all bit sizes if both are supported; we can't |
| # the output of pcretest -C has CRLF at the end of each line, but the shell | # have UTF-8 support without UTF-16 support (for example). |
| # strips only linefeeds from the output of a `backquoted` command. Hence the | |
| # alternative patterns. | |
| |
|
| case `$sim ./pcretest -C | $sim ./pcregrep 'Internal link size'` in | $sim ./pcretest -C utf >/dev/null |
| *2|*2[[:space:]]) link_size=2;; | utf=$? |
| *3|*3[[:space:]]) link_size=3;; | |
| *4|*4[[:space:]]) link_size=4;; | |
| *) echo "Failed to find internal link size"; exit 1;; | |
| esac | |
| |
|
| $sim ./pcretest -C | $sim ./pcregrep 'No UTF-8 support' >/dev/null | $sim ./pcretest -C ucp >/dev/null |
| utf8=$? | |
| |
| $sim ./pcretest -C | $sim ./pcregrep 'No Unicode properties support' >/dev/null | |
| ucp=$? |
ucp=$? |
| |
|
| jitopt= |
jitopt= |
| $sim ./pcretest -C | $sim ./pcregrep 'No just-in-time compiler support' \ | $sim ./pcretest -C jit >/dev/null |
| >/dev/null | |
| jit=$? |
jit=$? |
| if [ $jit -ne 0 ] ; then | if [ $jit -ne 0 -a "$nojit" != "yes" ] ; then |
| jitopt=-s+ |
jitopt=-s+ |
| fi |
fi |
| |
|
| if [ $utf8 -eq 0 ] ; then | # Handle any explicit skips |
| | |
| | for i in $skip; do eval do$i=no; done |
| | |
| | # If any unsuitable tests were explicitly requested, grumble. |
| | |
| | if [ $utf -eq 0 ] ; then |
| if [ $do4 = yes ] ; then |
if [ $do4 = yes ] ; then |
| echo "Can't run test 4 because UTF-8 support is not configured" | echo "Can't run test 4 because UTF support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| if [ $do5 = yes ] ; then |
if [ $do5 = yes ] ; then |
| echo "Can't run test 5 because UTF-8 support is not configured" | echo "Can't run test 5 because UTF support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| if [ $do8 = yes ] ; then | if [ $do9 = yes ] ; then |
| echo "Can't run test 8 because UTF-8 support is not configured" | echo "Can't run test 8 because UTF support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| if [ $do12 = yes ] ; then | if [ $do15 = yes ] ; then |
| echo "Can't run test 12 because UTF-8 support is not configured" | echo "Can't run test 15 because UTF support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| |
if [ $do18 = yes ] ; then |
| |
echo "Can't run test 18 because UTF support is not configured" |
| |
fi |
| |
if [ $do22 = yes ] ; then |
| |
echo "Can't run test 22 because UTF support is not configured" |
| |
fi |
| fi |
fi |
| |
|
| if [ $ucp -eq 0 ] ; then |
if [ $ucp -eq 0 ] ; then |
|
Line 138 if [ $ucp -eq 0 ] ; then
|
Line 386 if [ $ucp -eq 0 ] ; then
|
| echo "Can't run test 6 because Unicode property support is not configured" |
echo "Can't run test 6 because Unicode property support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| if [ $do9 = yes ] ; then | if [ $do7 = yes ] ; then |
| echo "Can't run test 9 because Unicode property support is not configured" | echo "Can't run test 7 because Unicode property support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| if [ $do10 = yes ] ; then |
if [ $do10 = yes ] ; then |
| echo "Can't run test 10 because Unicode property support is not configured" |
echo "Can't run test 10 because Unicode property support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| if [ $do13 = yes ] ; then | if [ $do16 = yes ] ; then |
| echo "Can't run test 12 because Unicode property support is not configured" | echo "Can't run test 16 because Unicode property support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| |
if [ $do19 = yes ] ; then |
| |
echo "Can't run test 19 because Unicode property support is not configured" |
| |
exit 1 |
| |
fi |
| fi |
fi |
| |
|
| if [ $link_size -ne 2 ] ; then |
if [ $link_size -ne 2 ] ; then |
| if [ $do10 = yes ] ; then | if [ $do11 = yes ] ; then |
| echo "Can't run test 10 because the link size ($link_size) is not 2" | echo "Can't run test 11 because the link size ($link_size) is not 2" |
| exit 1 |
exit 1 |
| fi |
fi |
| fi |
fi |
| |
|
| if [ $jit -eq 0 ] ; then |
if [ $jit -eq 0 ] ; then |
| if [ $do14 = "yes" ] ; then | if [ $do12 = "yes" ] ; then |
| echo "Can't run test 14 because JIT support is not configured" | echo "Can't run test 12 because JIT support is not configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| else |
else |
| if [ $do15 = "yes" ] ; then | if [ $do13 = "yes" ] ; then |
| echo "Can't run test 15 because JIT support is configured" | echo "Can't run test 13 because JIT support is configured" |
| exit 1 |
exit 1 |
| fi |
fi |
| fi |
fi |
| |
|
| # If no specific tests were requested, select all. Those that are not |
# If no specific tests were requested, select all. Those that are not |
| # relevant will be skipped. | # relevant will be automatically skipped. |
| |
|
| if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \ |
if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \ |
| $do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \ |
$do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \ |
| $do9 = no -a $do10 = no -a $do11 = no -a $do12 = no -a \ |
$do9 = no -a $do10 = no -a $do11 = no -a $do12 = no -a \ |
| $do13 = no -a $do14 = no -a $do15 = no ] ; then | $do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \ |
| | $do17 = no -a $do18 = no -a $do19 = no -a $do20 = no -a \ |
| | $do21 = no -a $do22 = no -a $do23 = no -a $do24 = no -a \ |
| | $do25 = no -a $do26 = no ] ; then |
| do1=yes |
do1=yes |
| do2=yes |
do2=yes |
| do3=yes |
do3=yes |
|
Line 193 if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 =
|
Line 448 if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 =
|
| do13=yes |
do13=yes |
| do14=yes |
do14=yes |
| do15=yes |
do15=yes |
| |
do16=yes |
| |
do17=yes |
| |
do18=yes |
| |
do19=yes |
| |
do20=yes |
| |
do21=yes |
| |
do22=yes |
| |
do23=yes |
| |
do24=yes |
| |
do25=yes |
| |
do26=yes |
| fi |
fi |
| |
|
| |
# Handle any explicit skips (again, so that an argument list may consist only |
| |
# of explicit skips). |
| |
|
| |
for i in $skip; do eval do$i=no; done |
| |
|
| # Show which release and which test data |
# Show which release and which test data |
| |
|
| echo "" |
echo "" |
| echo PCRE C library tests using test data from $testdata |
echo PCRE C library tests using test data from $testdata |
| $sim ./pcretest /dev/null |
$sim ./pcretest /dev/null |
| |
|
| |
for bmode in "$test8" "$test16" "$test32"; do |
| |
case "$bmode" in |
| |
skip) continue;; |
| |
-16) if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi |
| |
bits=16; echo "---- Testing 16-bit library ----"; echo "";; |
| |
-32) if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi |
| |
bits=32; echo "---- Testing 32-bit library ----"; echo "";; |
| |
*) bits=8; echo "---- Testing 8-bit library ----"; echo "";; |
| |
esac |
| |
|
| # Primary test, compatible with JIT and all versions of Perl >= 5.8 |
# Primary test, compatible with JIT and all versions of Perl >= 5.8 |
| |
|
| if [ $do1 = yes ] ; then |
if [ $do1 = yes ] ; then |
| echo "Test 1: main functionality (Compatible with Perl >= 5.8)" | echo $title1 |
| for opt in "" "-s" $jitopt; do |
for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput1 testtry | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput1 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput1 testtry |
$cf $testdata/testoutput1 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
|
Line 222 fi
|
Line 503 fi
|
| # PCRE tests that are not JIT or Perl-compatible: API, errors, internals |
# PCRE tests that are not JIT or Perl-compatible: API, errors, internals |
| |
|
| if [ $do2 = yes ] ; then |
if [ $do2 = yes ] ; then |
| echo "Test 2: API, errors, internals, and non-Perl stuff (not UTF-8)" | echo $title2 "(not UTF-$bits)" |
| for opt in "" "-s" $jitopt; do |
for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput2 testtry | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput2 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput2 testtry |
$cf $testdata/testoutput2 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
|
Line 276 if [ $do3 = yes ] ; then
|
Line 557 if [ $do3 = yes ] ; then
|
| fi |
fi |
| |
|
| if [ "$locale" != "" ] ; then |
if [ "$locale" != "" ] ; then |
| echo "Test 3: locale-specific features (using '$locale' locale)" | echo $title3 "(using '$locale' locale)" |
| for opt in "" "-s" $jitopt; do |
for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $opt $infile testtry | $sim $valgrind ./pcretest -q $bmode $opt $infile testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $outfile testtry |
$cf $outfile testtry |
| if [ $? != 0 ] ; then |
if [ $? != 0 ] ; then |
|
Line 304 if [ $do3 = yes ] ; then
|
Line 585 if [ $do3 = yes ] ; then
|
| fi |
fi |
| fi |
fi |
| |
|
| # Additional tests for UTF8 support | # Additional tests for UTF support |
| |
|
| if [ $do4 = yes ] ; then |
if [ $do4 = yes ] ; then |
| echo "Test 4: UTF-8 support (Compatible with Perl >= 5.8)" | echo ${title4A}-${bits}${title4B} |
| if [ $utf8 -eq 0 ] ; then | if [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-8 support is not available" | echo " Skipped because UTF-$bits support is not available" |
| else |
else |
| for opt in "" "-s" $jitopt; do |
for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput4 testtry | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput4 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput4 testtry |
$cf $testdata/testoutput4 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
|
Line 327 if [ $do4 = yes ] ; then
|
Line 608 if [ $do4 = yes ] ; then
|
| fi |
fi |
| |
|
| if [ $do5 = yes ] ; then |
if [ $do5 = yes ] ; then |
| echo "Test 5: API, internals, and non-Perl stuff for UTF-8 support" | echo ${title5}-${bits} support |
| if [ $utf8 -eq 0 ] ; then | if [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-8 support is not available" | echo " Skipped because UTF-$bits support is not available" |
| else |
else |
| for opt in "" "-s" $jitopt; do |
for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput5 testtry | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput5 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput5 testtry |
$cf $testdata/testoutput5 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
|
Line 347 if [ $do5 = yes ] ; then
|
Line 628 if [ $do5 = yes ] ; then
|
| fi |
fi |
| |
|
| if [ $do6 = yes ] ; then |
if [ $do6 = yes ] ; then |
| echo "Test 6: Unicode property support (Compatible with Perl >= 5.10)" | echo $title6 |
| if [ $utf8 -eq 0 -o $ucp -eq 0 ] ; then | if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
echo " Skipped because Unicode property support is not available" |
| else |
else |
| for opt in "" "-s" $jitopt; do |
for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput6 testtry | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput6 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput6 testtry |
$cf $testdata/testoutput6 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
|
Line 366 if [ $do6 = yes ] ; then
|
Line 647 if [ $do6 = yes ] ; then
|
| fi |
fi |
| fi |
fi |
| |
|
| # Tests for DFA matching support | # Test non-Perl-compatible Unicode property support |
| |
|
| if [ $do7 = yes ] ; then |
if [ $do7 = yes ] ; then |
| echo "Test 7: DFA matching" | echo $title7 |
| | if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| | echo " Skipped because Unicode property support is not available" |
| | else |
| | for opt in "" "-s" $jitopt; do |
| | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput7 testtry |
| | if [ $? = 0 ] ; then |
| | $cf $testdata/testoutput7 testtry |
| | if [ $? != 0 ] ; then exit 1; fi |
| | else exit 1 |
| | fi |
| | if [ "$opt" = "-s" ] ; then echo " OK with study" |
| | elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| | else echo " OK" |
| | fi |
| | done |
| | fi |
| | fi |
| | |
| | # Tests for DFA matching support |
| | |
| | if [ $do8 = yes ] ; then |
| | echo $title8 |
| for opt in "" "-s"; do |
for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $opt -dfa $testdata/testinput7 testtry | $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput7 testtry | $cf $testdata/testoutput8 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
|
Line 381 if [ $do7 = yes ] ; then
|
Line 684 if [ $do7 = yes ] ; then
|
| done |
done |
| fi |
fi |
| |
|
| if [ $do8 = yes ] ; then | if [ $do9 = yes ] ; then |
| echo "Test 8: DFA matching with UTF-8" | echo ${title9}-${bits} |
| if [ $utf8 -eq 0 ] ; then | if [ $utf -eq 0 ] ; then |
| echo " Skipped because UTF-8 support is not available" | echo " Skipped because UTF-$bits support is not available" |
| else |
else |
| for opt in "" "-s"; do |
for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $opt -dfa $testdata/testinput8 testtry | $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput8 testtry | $cf $testdata/testoutput9 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
|
Line 398 if [ $do8 = yes ] ; then
|
Line 701 if [ $do8 = yes ] ; then
|
| fi |
fi |
| fi |
fi |
| |
|
| if [ $do9 = yes ] ; then | if [ $do10 = yes ] ; then |
| echo "Test 9: DFA matching with Unicode properties" | echo $title10 |
| if [ $utf8 -eq 0 -o $ucp -eq 0 ] ; then | if [ $utf -eq 0 -o $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
echo " Skipped because Unicode property support is not available" |
| else |
else |
| for opt in "" "-s"; do |
for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $opt -dfa $testdata/testinput9 testtry | $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput9 testtry | $cf $testdata/testoutput10 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
|
Line 419 fi
|
Line 722 fi
|
| # is Unicode property support and the link size is 2. The actual tests are |
# is Unicode property support and the link size is 2. The actual tests are |
| # mostly the same as in some of the above, but in this test we inspect some |
# mostly the same as in some of the above, but in this test we inspect some |
| # offsets and sizes that require a known link size. This is a doublecheck for |
# offsets and sizes that require a known link size. This is a doublecheck for |
| # the maintainer, just in case something changes unexpectely. | # the maintainer, just in case something changes unexpectely. The output from |
| | # this test is not the same in 8-bit and 16-bit modes. |
| |
|
| if [ $do10 = yes ] ; then | if [ $do11 = yes ] ; then |
| echo "Test 10: Internal offsets and code size tests" | echo $title11 |
| if [ $link_size -ne 2 ] ; then |
if [ $link_size -ne 2 ] ; then |
| echo " Skipped because link size is not 2" |
echo " Skipped because link size is not 2" |
| elif [ $ucp -eq 0 ] ; then |
elif [ $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
echo " Skipped because Unicode property support is not available" |
| else |
else |
| for opt in "" "-s"; do |
for opt in "" "-s"; do |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput10 testtry | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput10 testtry | $cf $testdata/testoutput11-$bits testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
|
Line 440 if [ $do10 = yes ] ; then
|
Line 744 if [ $do10 = yes ] ; then
|
| fi |
fi |
| fi |
fi |
| |
|
| # Test of Perl >= 5.10 features without UTF8 support | # Test JIT-specific features when JIT is available |
| |
|
| if [ $do11 = yes ] ; then | if [ $do12 = yes ] ; then |
| echo "Test 11: Features from Perl >= 5.10 without UTF8 support" | echo $title12 |
| for opt in "" "-s" $jitopt; do | if [ $jit -eq 0 -o "$nojit" = "yes" ] ; then |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput11 testtry | echo " Skipped because JIT is not available or not usable" |
| | else |
| | $sim $valgrind ./pcretest -q $bmode $testdata/testinput12 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput11 testtry | $cf $testdata/testoutput12 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
| if [ "$opt" = "-s" ] ; then echo " OK with study" | echo " OK" |
| elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" | fi |
| else echo " OK" | fi |
| | |
| | # Test JIT-specific features when JIT is not available |
| | |
| | if [ $do13 = yes ] ; then |
| | echo $title13 |
| | if [ $jit -ne 0 ] ; then |
| | echo " Skipped because JIT is available" |
| | else |
| | $sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry |
| | if [ $? = 0 ] ; then |
| | $cf $testdata/testoutput13 testtry |
| | if [ $? != 0 ] ; then exit 1; fi |
| | else exit 1 |
| fi |
fi |
| done | echo " OK" |
| | fi |
| fi |
fi |
| |
|
| # Test of Perl >= 5.10 features with UTF8 support | # Tests for 8-bit-specific features |
| |
|
| if [ $do12 = yes ] ; then | if [ "$do14" = yes ] ; then |
| echo "Test 12: Features from Perl >= 5.10 with UTF8 support" | echo $title14 |
| if [ $utf8 -eq 0 ] ; then | if [ "$bits" = "16" -o "$bits" = "32" ] ; then |
| echo " Skipped because UTF-8 support is not available" | echo " Skipped when running 16/32-bit tests" |
| else |
else |
| |
cp -f $testdata/saved16 testsaved16 |
| |
cp -f $testdata/saved32 testsaved32 |
| for opt in "" "-s" $jitopt; do |
for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput12 testtry | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput14 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput12 testtry | $cf $testdata/testoutput14 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
|
Line 480 if [ $do12 = yes ] ; then
|
Line 802 if [ $do12 = yes ] ; then
|
| fi |
fi |
| fi |
fi |
| |
|
| # Test non-Perl-compatible Unicode property support | # Tests for 8-bit-specific features (needs UTF-8 support) |
| |
|
| if [ $do13 = yes ] ; then | if [ "$do15" = yes ] ; then |
| echo "Test 13: API, internals, and non-Perl stuff for Unicode property support" | echo $title15 |
| if [ $utf8 -eq 0 -o $ucp -eq 0 ] ; then | if [ "$bits" = "16" -o "$bits" = "32" ] ; then |
| | echo " Skipped when running 16/32-bit tests" |
| | elif [ $utf -eq 0 ] ; then |
| | echo " Skipped because UTF-$bits support is not available" |
| | else |
| | for opt in "" "-s" $jitopt; do |
| | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput15 testtry |
| | if [ $? = 0 ] ; then |
| | $cf $testdata/testoutput15 testtry |
| | if [ $? != 0 ] ; then exit 1; fi |
| | else exit 1 |
| | fi |
| | if [ "$opt" = "-s" ] ; then echo " OK with study" |
| | elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| | else echo " OK" |
| | fi |
| | done |
| | fi |
| | fi |
| | |
| | # Tests for 8-bit-specific features (Unicode property support) |
| | |
| | if [ $do16 = yes ] ; then |
| | echo $title16 |
| | if [ "$bits" = "16" -o "$bits" = "32" ] ; then |
| | echo " Skipped when running 16/32-bit tests" |
| | elif [ $ucp -eq 0 ] ; then |
| echo " Skipped because Unicode property support is not available" |
echo " Skipped because Unicode property support is not available" |
| else |
else |
| for opt in "" "-s" $jitopt; do |
for opt in "" "-s" $jitopt; do |
| $sim $valgrind ./pcretest -q $opt $testdata/testinput13 testtry | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput16 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput13 testtry | $cf $testdata/testoutput16 testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
|
Line 502 if [ $do13 = yes ] ; then
|
Line 850 if [ $do13 = yes ] ; then
|
| fi |
fi |
| fi |
fi |
| |
|
| # Test JIT-specific features when JIT is available | # Tests for 16/32-bit-specific features |
| |
|
| if [ $do14 = yes ] ; then | if [ $do17 = yes ] ; then |
| echo "Test 14: JIT-specific features (JIT available)" | echo $title17 |
| if [ $jit -eq 0 ] ; then | if [ "$bits" = "8" ] ; then |
| echo " Skipped because JIT is not available or not usable" | echo " Skipped when running 8-bit tests" |
| else |
else |
| $sim $valgrind ./pcretest -q $testdata/testinput14 testtry | for opt in "" "-s" $jitopt; do |
| | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput17 testtry |
| | if [ $? = 0 ] ; then |
| | $cf $testdata/testoutput17 testtry |
| | if [ $? != 0 ] ; then exit 1; fi |
| | else exit 1 |
| | fi |
| | if [ "$opt" = "-s" ] ; then echo " OK with study" |
| | elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| | else echo " OK" |
| | fi |
| | done |
| | fi |
| | fi |
| | |
| | # Tests for 16/32-bit-specific features (UTF-16/32 support) |
| | |
| | if [ $do18 = yes ] ; then |
| | echo $title18 |
| | if [ "$bits" = "8" ] ; then |
| | echo " Skipped when running 8-bit tests" |
| | elif [ $utf -eq 0 ] ; then |
| | echo " Skipped because UTF-$bits support is not available" |
| | else |
| | for opt in "" "-s" $jitopt; do |
| | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput18 testtry |
| | if [ $? = 0 ] ; then |
| | $cf $testdata/testoutput18-$bits testtry |
| | if [ $? != 0 ] ; then exit 1; fi |
| | else exit 1 |
| | fi |
| | if [ "$opt" = "-s" ] ; then echo " OK with study" |
| | elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| | else echo " OK" |
| | fi |
| | done |
| | fi |
| | fi |
| | |
| | # Tests for 16/32-bit-specific features (Unicode property support) |
| | |
| | if [ $do19 = yes ] ; then |
| | echo $title19 |
| | if [ "$bits" = "8" ] ; then |
| | echo " Skipped when running 8-bit tests" |
| | elif [ $ucp -eq 0 ] ; then |
| | echo " Skipped because Unicode property support is not available" |
| | else |
| | for opt in "" "-s" $jitopt; do |
| | $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput19 testtry |
| | if [ $? = 0 ] ; then |
| | $cf $testdata/testoutput19 testtry |
| | if [ $? != 0 ] ; then exit 1; fi |
| | else exit 1 |
| | fi |
| | if [ "$opt" = "-s" ] ; then echo " OK with study" |
| | elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study" |
| | else echo " OK" |
| | fi |
| | done |
| | fi |
| | fi |
| | |
| | # Tests for 16/32-bit-specific features in DFA non-UTF-16/32 mode |
| | |
| | if [ $do20 = yes ] ; then |
| | echo $title20 |
| | if [ "$bits" = "8" ] ; then |
| | echo " Skipped when running 8-bit tests" |
| | else |
| | for opt in "" "-s"; do |
| | $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput20 testtry |
| | if [ $? = 0 ] ; then |
| | $cf $testdata/testoutput20 testtry |
| | if [ $? != 0 ] ; then exit 1; fi |
| | else exit 1 |
| | fi |
| | if [ "$opt" = "-s" ] ; then echo " OK with study" |
| | else echo " OK" |
| | fi |
| | done |
| | fi |
| | fi |
| | |
| | # Tests for reloads with 16/32-bit library |
| | |
| | if [ $do21 = yes ] ; then |
| | echo $title21 |
| | if [ "$bits" = "8" ] ; then |
| | echo " Skipped when running 8-bit tests" |
| | elif [ $link_size -ne 2 ] ; then |
| | echo " Skipped because link size is not 2" |
| | else |
| | cp -f $testdata/saved8 testsaved8 |
| | cp -f $testdata/saved16LE-1 testsaved16LE-1 |
| | cp -f $testdata/saved16BE-1 testsaved16BE-1 |
| | cp -f $testdata/saved32LE-1 testsaved32LE-1 |
| | cp -f $testdata/saved32BE-1 testsaved32BE-1 |
| | $sim $valgrind ./pcretest -q $bmode $testdata/testinput21 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput14 testtry | $cf $testdata/testoutput21-$bits testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
|
Line 519 if [ $do14 = yes ] ; then
|
Line 965 if [ $do14 = yes ] ; then
|
| fi |
fi |
| fi |
fi |
| |
|
| # Test JIT-specific features when JIT is not available | # Tests for reloads with 16/32-bit library (UTF-16 support) |
| |
|
| if [ $do15 = yes ] ; then | if [ $do22 = yes ] ; then |
| echo "Test 15: JIT-specific features (JIT not available)" | echo $title22 |
| if [ $jit -ne 0 ] ; then | if [ "$bits" = "8" ] ; then |
| echo " Skipped because JIT is available" | echo " Skipped when running 8-bit tests" |
| | elif [ $utf -eq 0 ] ; then |
| | echo " Skipped because UTF-$bits support is not available" |
| | elif [ $link_size -ne 2 ] ; then |
| | echo " Skipped because link size is not 2" |
| else |
else |
| $sim $valgrind ./pcretest -q $testdata/testinput15 testtry | cp -f $testdata/saved16LE-2 testsaved16LE-2 |
| | cp -f $testdata/saved16BE-2 testsaved16BE-2 |
| | cp -f $testdata/saved32LE-2 testsaved32LE-2 |
| | cp -f $testdata/saved32BE-2 testsaved32BE-2 |
| | $sim $valgrind ./pcretest -q $bmode $testdata/testinput22 testtry |
| if [ $? = 0 ] ; then |
if [ $? = 0 ] ; then |
| $cf $testdata/testoutput15 testtry | $cf $testdata/testoutput22-$bits testtry |
| if [ $? != 0 ] ; then exit 1; fi |
if [ $? != 0 ] ; then exit 1; fi |
| else exit 1 |
else exit 1 |
| fi |
fi |
| echo " OK" |
echo " OK" |
| fi |
fi |
| fi |
fi |
| |
|
| |
if [ $do23 = yes ] ; then |
| |
echo $title23 |
| |
if [ "$bits" = "8" -o "$bits" = "32" ] ; then |
| |
echo " Skipped when running 8/32-bit tests" |
| |
else |
| |
$sim $valgrind ./pcretest -q $bmode $testdata/testinput23 testtry |
| |
if [ $? = 0 ] ; then |
| |
$cf $testdata/testoutput23 testtry |
| |
if [ $? != 0 ] ; then exit 1; fi |
| |
else exit 1 |
| |
fi |
| |
echo " OK" |
| |
fi |
| |
fi |
| |
|
| |
if [ $do24 = yes ] ; then |
| |
echo $title24 |
| |
if [ "$bits" = "8" -o "$bits" = "32" ] ; then |
| |
echo " Skipped when running 8/32-bit tests" |
| |
elif [ $utf -eq 0 ] ; then |
| |
echo " Skipped because UTF-$bits support is not available" |
| |
else |
| |
$sim $valgrind ./pcretest -q $bmode $testdata/testinput24 testtry |
| |
if [ $? = 0 ] ; then |
| |
$cf $testdata/testoutput24 testtry |
| |
if [ $? != 0 ] ; then exit 1; fi |
| |
else exit 1 |
| |
fi |
| |
echo " OK" |
| |
fi |
| |
fi |
| |
|
| |
if [ $do25 = yes ] ; then |
| |
echo $title25 |
| |
if [ "$bits" = "8" -o "$bits" = "16" ] ; then |
| |
echo " Skipped when running 8/16-bit tests" |
| |
else |
| |
$sim $valgrind ./pcretest -q $bmode $testdata/testinput25 testtry |
| |
if [ $? = 0 ] ; then |
| |
$cf $testdata/testoutput25 testtry |
| |
if [ $? != 0 ] ; then exit 1; fi |
| |
else exit 1 |
| |
fi |
| |
echo " OK" |
| |
fi |
| |
fi |
| |
|
| |
if [ $do26 = yes ] ; then |
| |
echo $title26 |
| |
if [ "$bits" = "8" -o "$bits" = "16" ] ; then |
| |
echo " Skipped when running 8/16-bit tests" |
| |
elif [ $utf -eq 0 ] ; then |
| |
echo " Skipped because UTF-$bits support is not available" |
| |
else |
| |
$sim $valgrind ./pcretest -q $bmode $testdata/testinput26 testtry |
| |
if [ $? = 0 ] ; then |
| |
$cf $testdata/testoutput26 testtry |
| |
if [ $? != 0 ] ; then exit 1; fi |
| |
else exit 1 |
| |
fi |
| |
echo " OK" |
| |
fi |
| |
fi |
| |
|
| |
# End of loop for 8/16/32-bit tests |
| |
done |
| |
|
| |
# Clean up local working files |
| |
rm -f test3input test3output testNinput testsaved* teststderr teststdout testtry |
| |
|
| # End |
# End |
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to RunTest CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / pcre