Diff for /embedaddon/pcre/config.h.generic between versions 1.1.1.3 and 1.1.1.4

version 1.1.1.3, 2012/10/09 09:19:17 version 1.1.1.4, 2013/07/22 08:25:55
Line 1 Line 1
 /* config.h.  Generated from config.h.in by configure.  */  /* config.h.  Generated from config.h.in by configure.  */
 /* config.h.in.  Generated from configure.ac by autoheader.  */  /* config.h.in.  Generated from configure.ac by autoheader.  */
   
   /* PCRE is written in Standard C, but there are a few non-standard things it
   can cope with, allowing it to run on SunOS4 and other "close to standard"
   systems.
   
/* On Unix-like systems config.h.in is converted by "configure" into config.h.In environments that support the GNU autotools, config.h.in is converted into
Some other environments also support the use of "configure". PCRE is written inconfig.h by the "configure" script. In environments that use CMake,
Standard C, but there are a few non-standard things it can cope with, allowingconfig-cmake.in is converted into config.h. If you are going to build PCRE "by
it to run on SunOS4 and other "close to standard" systems.hand" without using "configure" or CMake, you should copy the distributed
 config.h.generic to config.h, and edit the macro definitions to be the way you
 need them. You must then add -DHAVE_CONFIG_H to all of your compile commands,
 so that config.h is included at the start of every source.
   
 If you are going to build PCRE "by hand" on a system without "configure" you  
 should copy the distributed config.h.generic to config.h, and then set up the  
 macro definitions the way you need them. You must then add -DHAVE_CONFIG_H to  
 all of your compile commands, so that config.h is included at the start of  
 every source.  
   
 Alternatively, you can avoid editing by using -D on the compiler command line  Alternatively, you can avoid editing by using -D on the compiler command line
to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H.to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H,
 but if you do, default values will be taken from config.h for non-boolean
 macros that are not defined on the command line.
   
PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() ifBoolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE8 should either be defined
HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set(conventionally to 1) for TRUE, and not defined at all for FALSE. All such
them both to 0; an emulation function will be used. */macros are listed as a commented #undef in config.h.generic. Macros such as
 MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are
 surrounded by #ifndef/#endif lines so that the value can be overridden by -D.
   
   PCRE uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if
   HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make
   sure both macros are undefined; an emulation function will then be used. */
   
 /* By default, the \R escape sequence matches any Unicode line ending  /* By default, the \R escape sequence matches any Unicode line ending
   character or sequence of characters. If BSR_ANYCRLF is defined, this is   character or sequence of characters. If BSR_ANYCRLF is defined (to any
   changed so that backslash-R matches only CR, LF, or CRLF. The build- time   value), this is changed so that backslash-R matches only CR, LF, or CRLF.
   default can be overridden by the user of PCRE at runtime. On systems that   The build-time default can be overridden by the user of PCRE at runtime. */
   support it, "configure" can be used to override the default. */ 
 /* #undef BSR_ANYCRLF */  /* #undef BSR_ANYCRLF */
   
 /* If you are compiling for a system that uses EBCDIC instead of ASCII  /* If you are compiling for a system that uses EBCDIC instead of ASCII
   character codes, define this macro as 1. On systems that can use   character codes, define this macro to any value. You must also edit the
   "configure", this can be done via --enable-ebcdic. PCRE will then assume   NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15).
   that all input strings are in EBCDIC. If you do not define this macro, PCRE   On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is
   will assume input strings are ASCII or UTF-8/16 Unicode. It is not possible   automatically adjusted. When EBCDIC is set, PCRE assumes that all input
   to build a version of PCRE that supports both EBCDIC and UTF-8/16. */   strings are in EBCDIC. If you do not define this macro, PCRE will assume
    input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build
    a version of PCRE that supports both EBCDIC and UTF-8/16/32. */
 /* #undef EBCDIC */  /* #undef EBCDIC */
   
   /* In an EBCDIC environment, define this macro to any value to arrange for the
      NL character to be 0x25 instead of the default 0x15. NL plays the role that
      LF does in an ASCII/Unicode environment. The value must also be set in the
      NEWLINE macro below. On systems that can use "configure" or CMake to set
      EBCDIC_NL25, the adjustment of NEWLINE is automatic. */
   /* #undef EBCDIC_NL25 */
   
 /* Define to 1 if you have the `bcopy' function. */  /* Define to 1 if you have the `bcopy' function. */
#ifndef HAVE_BCOPY/* #undef HAVE_BCOPY */
#define HAVE_BCOPY 1 
#endif 
   
 /* Define to 1 if you have the <bits/type_traits.h> header file. */  /* Define to 1 if you have the <bits/type_traits.h> header file. */
 /* #undef HAVE_BITS_TYPE_TRAITS_H */  /* #undef HAVE_BITS_TYPE_TRAITS_H */
   
 /* Define to 1 if you have the <bzlib.h> header file. */  /* Define to 1 if you have the <bzlib.h> header file. */
#ifndef HAVE_BZLIB_H/* #undef HAVE_BZLIB_H */
#define HAVE_BZLIB_H 1 
#endif 
   
 /* Define to 1 if you have the <dirent.h> header file. */  /* Define to 1 if you have the <dirent.h> header file. */
#ifndef HAVE_DIRENT_H/* #undef HAVE_DIRENT_H */
#define HAVE_DIRENT_H 1 
#endif 
   
 /* Define to 1 if you have the <dlfcn.h> header file. */  /* Define to 1 if you have the <dlfcn.h> header file. */
#ifndef HAVE_DLFCN_H/* #undef HAVE_DLFCN_H */
#define HAVE_DLFCN_H 1 
#endif 
   
 /* Define to 1 if you have the <editline/readline.h> header file. */  /* Define to 1 if you have the <editline/readline.h> header file. */
 /* #undef HAVE_EDITLINE_READLINE_H */  /* #undef HAVE_EDITLINE_READLINE_H */
Line 65  them both to 0; an emulation function will be used. */ Line 73  them both to 0; an emulation function will be used. */
 /* #undef HAVE_EDIT_READLINE_READLINE_H */  /* #undef HAVE_EDIT_READLINE_READLINE_H */
   
 /* Define to 1 if you have the <inttypes.h> header file. */  /* Define to 1 if you have the <inttypes.h> header file. */
#ifndef HAVE_INTTYPES_H/* #undef HAVE_INTTYPES_H */
#define HAVE_INTTYPES_H 1 
#endif 
   
 /* Define to 1 if you have the <limits.h> header file. */  /* Define to 1 if you have the <limits.h> header file. */
#ifndef HAVE_LIMITS_H/* #undef HAVE_LIMITS_H */
#define HAVE_LIMITS_H 1 
#endif 
   
 /* Define to 1 if the system has the type `long long'. */  /* Define to 1 if the system has the type `long long'. */
#ifndef HAVE_LONG_LONG/* #undef HAVE_LONG_LONG */
#define HAVE_LONG_LONG 1 
#endif 
   
 /* Define to 1 if you have the `memmove' function. */  /* Define to 1 if you have the `memmove' function. */
#ifndef HAVE_MEMMOVE/* #undef HAVE_MEMMOVE */
#define HAVE_MEMMOVE 1 
#endif 
   
 /* Define to 1 if you have the <memory.h> header file. */  /* Define to 1 if you have the <memory.h> header file. */
#ifndef HAVE_MEMORY_H/* #undef HAVE_MEMORY_H */
#define HAVE_MEMORY_H 1 
#endif 
   
   /* Define if you have POSIX threads libraries and header files. */
   /* #undef HAVE_PTHREAD */
   
   /* Have PTHREAD_PRIO_INHERIT. */
   /* #undef HAVE_PTHREAD_PRIO_INHERIT */
   
 /* Define to 1 if you have the <readline/history.h> header file. */  /* Define to 1 if you have the <readline/history.h> header file. */
 /* #undef HAVE_READLINE_HISTORY_H */  /* #undef HAVE_READLINE_HISTORY_H */
   
Line 96  them both to 0; an emulation function will be used. */ Line 100  them both to 0; an emulation function will be used. */
 /* #undef HAVE_READLINE_READLINE_H */  /* #undef HAVE_READLINE_READLINE_H */
   
 /* Define to 1 if you have the <stdint.h> header file. */  /* Define to 1 if you have the <stdint.h> header file. */
#ifndef HAVE_STDINT_H/* #undef HAVE_STDINT_H */
#define HAVE_STDINT_H 1 
#endif 
   
 /* Define to 1 if you have the <stdlib.h> header file. */  /* Define to 1 if you have the <stdlib.h> header file. */
#ifndef HAVE_STDLIB_H/* #undef HAVE_STDLIB_H */
#define HAVE_STDLIB_H 1 
#endif 
   
 /* Define to 1 if you have the `strerror' function. */  /* Define to 1 if you have the `strerror' function. */
#ifndef HAVE_STRERROR/* #undef HAVE_STRERROR */
#define HAVE_STRERROR 1 
#endif 
   
 /* Define to 1 if you have the <string> header file. */  /* Define to 1 if you have the <string> header file. */
#ifndef HAVE_STRING/* #undef HAVE_STRING */
#define HAVE_STRING 1 
#endif 
   
 /* Define to 1 if you have the <strings.h> header file. */  /* Define to 1 if you have the <strings.h> header file. */
#ifndef HAVE_STRINGS_H/* #undef HAVE_STRINGS_H */
#define HAVE_STRINGS_H 1 
#endif 
   
 /* Define to 1 if you have the <string.h> header file. */  /* Define to 1 if you have the <string.h> header file. */
#ifndef HAVE_STRING_H/* #undef HAVE_STRING_H */
#define HAVE_STRING_H 1 
#endif 
   
 /* Define to 1 if you have `strtoimax'. */  /* Define to 1 if you have `strtoimax'. */
 /* #undef HAVE_STRTOIMAX */  /* #undef HAVE_STRTOIMAX */
Line 132  them both to 0; an emulation function will be used. */ Line 124  them both to 0; an emulation function will be used. */
 /* #undef HAVE_STRTOLL */  /* #undef HAVE_STRTOLL */
   
 /* Define to 1 if you have `strtoq'. */  /* Define to 1 if you have `strtoq'. */
#ifndef HAVE_STRTOQ/* #undef HAVE_STRTOQ */
#define HAVE_STRTOQ 1 
#endif 
   
 /* Define to 1 if you have the <sys/stat.h> header file. */  /* Define to 1 if you have the <sys/stat.h> header file. */
#ifndef HAVE_SYS_STAT_H/* #undef HAVE_SYS_STAT_H */
#define HAVE_SYS_STAT_H 1 
#endif 
   
 /* Define to 1 if you have the <sys/types.h> header file. */  /* Define to 1 if you have the <sys/types.h> header file. */
#ifndef HAVE_SYS_TYPES_H/* #undef HAVE_SYS_TYPES_H */
#define HAVE_SYS_TYPES_H 1 
#endif 
   
 /* Define to 1 if you have the <type_traits.h> header file. */  /* Define to 1 if you have the <type_traits.h> header file. */
 /* #undef HAVE_TYPE_TRAITS_H */  /* #undef HAVE_TYPE_TRAITS_H */
   
 /* Define to 1 if you have the <unistd.h> header file. */  /* Define to 1 if you have the <unistd.h> header file. */
#ifndef HAVE_UNISTD_H/* #undef HAVE_UNISTD_H */
#define HAVE_UNISTD_H 1 
#endif 
   
 /* Define to 1 if the system has the type `unsigned long long'. */  /* Define to 1 if the system has the type `unsigned long long'. */
#ifndef HAVE_UNSIGNED_LONG_LONG/* #undef HAVE_UNSIGNED_LONG_LONG */
#define HAVE_UNSIGNED_LONG_LONG 1 
#endif 
   
   /* Define to 1 if the compiler supports simple visibility declarations. */
   /* #undef HAVE_VISIBILITY */
   
 /* Define to 1 if you have the <windows.h> header file. */  /* Define to 1 if you have the <windows.h> header file. */
 /* #undef HAVE_WINDOWS_H */  /* #undef HAVE_WINDOWS_H */
   
 /* Define to 1 if you have the <zlib.h> header file. */  /* Define to 1 if you have the <zlib.h> header file. */
#ifndef HAVE_ZLIB_H/* #undef HAVE_ZLIB_H */
#define HAVE_ZLIB_H 1 
#endif 
   
 /* Define to 1 if you have `_strtoi64'. */  /* Define to 1 if you have `_strtoi64'. */
 /* #undef HAVE__STRTOI64 */  /* #undef HAVE__STRTOI64 */
Line 174  them both to 0; an emulation function will be used. */ Line 157  them both to 0; an emulation function will be used. */
    as offsets within the compiled regex. The default is 2, which allows for     as offsets within the compiled regex. The default is 2, which allows for
    compiled patterns up to 64K long. This covers the vast majority of cases.     compiled patterns up to 64K long. This covers the vast majority of cases.
    However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows     However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows
   for longer patterns in extreme cases. On systems that support it,   for longer patterns in extreme cases. */
   "configure" can be used to override this default. */ 
 #ifndef LINK_SIZE  #ifndef LINK_SIZE
 #define LINK_SIZE 2  #define LINK_SIZE 2
 #endif  #endif
   
 /* Define to the sub-directory in which libtool stores uninstalled libraries.  /* Define to the sub-directory in which libtool stores uninstalled libraries.
    */     */
   /* This is ignored unless you are using libtool. */
 #ifndef LT_OBJDIR  #ifndef LT_OBJDIR
 #define LT_OBJDIR ".libs/"  #define LT_OBJDIR ".libs/"
 #endif  #endif
Line 191  them both to 0; an emulation function will be used. */ Line 174  them both to 0; an emulation function will be used. */
    pcre_exec(). There is a runtime interface for setting a different limit.     pcre_exec(). There is a runtime interface for setting a different limit.
    The limit exists in order to catch runaway regular expressions that take     The limit exists in order to catch runaway regular expressions that take
    for ever to determine that they do not match. The default is set very large     for ever to determine that they do not match. The default is set very large
   so that it does not accidentally catch legitimate cases. On systems that   so that it does not accidentally catch legitimate cases. */
   support it, "configure" can be used to override this default default. */ 
 #ifndef MATCH_LIMIT  #ifndef MATCH_LIMIT
 #define MATCH_LIMIT 10000000  #define MATCH_LIMIT 10000000
 #endif  #endif
Line 204  them both to 0; an emulation function will be used. */ Line 186  them both to 0; an emulation function will be used. */
    used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of     used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of
    match(). To have any useful effect, it must be less than the value of     match(). To have any useful effect, it must be less than the value of
    MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is     MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is
   a runtime method for setting a different limit. On systems that support it,   a runtime method for setting a different limit. */
   "configure" can be used to override the default. */ 
 #ifndef MATCH_LIMIT_RECURSION  #ifndef MATCH_LIMIT_RECURSION
 #define MATCH_LIMIT_RECURSION MATCH_LIMIT  #define MATCH_LIMIT_RECURSION MATCH_LIMIT
 #endif  #endif
Line 224  them both to 0; an emulation function will be used. */ Line 205  them both to 0; an emulation function will be used. */
 #define MAX_NAME_SIZE 32  #define MAX_NAME_SIZE 32
 #endif  #endif
   
/* The value of NEWLINE determines the newline character sequence. On systems/* The value of NEWLINE determines the default newline character sequence.
   that support it, "configure" can be used to override the default, which is   PCRE client programs can override this by selecting other values at run
   10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or -2   time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338
   (ANYCRLF). */   (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or
    3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and
    0x25) that are used as the NL line terminator that is equivalent to ASCII
    LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY),
    or -2 (ANYCRLF). */
 #ifndef NEWLINE  #ifndef NEWLINE
 #define NEWLINE 10  #define NEWLINE 10
 #endif  #endif
   
   /* Define to 1 if your C compiler doesn't accept -c and -o together. */
   /* #undef NO_MINUS_C_MINUS_O */
   
 /* PCRE uses recursive function calls to handle backtracking while matching.  /* PCRE uses recursive function calls to handle backtracking while matching.
    This can sometimes be a problem on systems that have stacks of limited     This can sometimes be a problem on systems that have stacks of limited
   size. Define NO_RECURSE to get a version that doesn't use recursion in the   size. Define NO_RECURSE to any value to get a version that doesn't use
   match() function; instead it creates its own stack by steam using   recursion in the match() function; instead it creates its own stack by
   pcre_recurse_malloc() to obtain memory from the heap. For more detail, see   steam using pcre_recurse_malloc() to obtain memory from the heap. For more
   the comments and other stuff just above the match() function. On systems   detail, see the comments and other stuff just above the match() function.
   that support it, "configure" can be used to set this in the Makefile (use   */
   --disable-stack-for-recursion). */ 
 /* #undef NO_RECURSE */  /* #undef NO_RECURSE */
   
 /* Name of package */  /* Name of package */
Line 252  them both to 0; an emulation function will be used. */ Line 239  them both to 0; an emulation function will be used. */
 #define PACKAGE_NAME "PCRE"  #define PACKAGE_NAME "PCRE"
   
 /* Define to the full name and version of this package. */  /* Define to the full name and version of this package. */
#define PACKAGE_STRING "PCRE 8.31"#define PACKAGE_STRING "PCRE 8.33"
   
 /* Define to the one symbol short name of this package. */  /* Define to the one symbol short name of this package. */
 #define PACKAGE_TARNAME "pcre"  #define PACKAGE_TARNAME "pcre"
Line 261  them both to 0; an emulation function will be used. */ Line 248  them both to 0; an emulation function will be used. */
 #define PACKAGE_URL ""  #define PACKAGE_URL ""
   
 /* Define to the version of this package. */  /* Define to the version of this package. */
#define PACKAGE_VERSION "8.31"#define PACKAGE_VERSION "8.33"
   
 /* The value of PCREGREP_BUFSIZE determines the size of buffer used by  /* The value of PCREGREP_BUFSIZE determines the size of buffer used by
   pcregrep to hold parts of the file it is searching. On systems that support   pcregrep to hold parts of the file it is searching. This is also the
   it, "configure" can be used to override the default, which is 8192. This is   minimum value. The actual amount of memory used by pcregrep is three times
   also the minimum value. The actual amount of memory used by pcregrep is   this number, because it allows for the buffering of "before" and "after"
   three times this number, because it allows for the buffering of "before"   lines. */
   and "after" lines. */ 
 #ifndef PCREGREP_BUFSIZE  #ifndef PCREGREP_BUFSIZE
 #define PCREGREP_BUFSIZE 20480  #define PCREGREP_BUFSIZE 20480
 #endif  #endif
   
   
 /* If you are compiling for a system other than a Unix-like system or  /* If you are compiling for a system other than a Unix-like system or
    Win32, and it needs some magic to be inserted before the definition     Win32, and it needs some magic to be inserted before the definition
    of a function that is exported by the library, define this macro to     of a function that is exported by the library, define this macro to
   contain the relevant magic. If you do not define this macro, it   contain the relevant magic. If you do not define this macro, a suitable
   defaults to "extern" for a C compiler and "extern C" for a C++    __declspec value is used for Windows systems; in other environments
   compiler on non-Win32 systems. This macro apears at the start of   "extern" is used for a C compiler and "extern C" for a C++ compiler.
   every exported function that is part of the external API. It does   This macro apears at the start of every exported function that is part
   not appear on functions that are "external" in the C sense, but   of the external API. It does not appear on functions that are "external"
   which are internal to the library. */   in the C sense, but which are internal to the library. */
 /* #undef PCRE_EXP_DEFN */  /* #undef PCRE_EXP_DEFN */
   
/* Define if linking statically (TODO: make nice with Libtool) *//* Define to any value if linking statically (TODO: make nice with Libtool) */
 /* #undef PCRE_STATIC */  /* #undef PCRE_STATIC */
   
 /* When calling PCRE via the POSIX interface, additional working storage is  /* When calling PCRE via the POSIX interface, additional working storage is
Line 294  them both to 0; an emulation function will be used. */ Line 279  them both to 0; an emulation function will be used. */
    only two. If the number of expected substrings is small, the wrapper     only two. If the number of expected substrings is small, the wrapper
    function uses space on the stack, because this is faster than using     function uses space on the stack, because this is faster than using
    malloc() for each call. The threshold above which the stack is no longer     malloc() for each call. The threshold above which the stack is no longer
   used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it,   used is defined by POSIX_MALLOC_THRESHOLD. */
   "configure" can be used to override this default. */ 
 #ifndef POSIX_MALLOC_THRESHOLD  #ifndef POSIX_MALLOC_THRESHOLD
 #define POSIX_MALLOC_THRESHOLD 10  #define POSIX_MALLOC_THRESHOLD 10
 #endif  #endif
   
   /* Define to necessary symbol if this constant uses a non-standard name on
      your system. */
   /* #undef PTHREAD_CREATE_JOINABLE */
   
 /* Define to 1 if you have the ANSI C header files. */  /* Define to 1 if you have the ANSI C header files. */
#ifndef STDC_HEADERS/* #undef STDC_HEADERS */
#define STDC_HEADERS 1 
#endif 
   
/* Define to enable support for Just-In-Time compiling. *//* Define to allow pcretest and pcregrep to be linked with gcov, so that they
    are able to generate code coverage reports. */
 /* #undef SUPPORT_GCOV */
 
 /* Define to any value to enable support for Just-In-Time compiling. */
 /* #undef SUPPORT_JIT */  /* #undef SUPPORT_JIT */
   
/* Define to allow pcregrep to be linked with libbz2, so that it is able to/* Define to any value to allow pcregrep to be linked with libbz2, so that it
   handle .bz2 files. */   is able to handle .bz2 files. */
 /* #undef SUPPORT_LIBBZ2 */  /* #undef SUPPORT_LIBBZ2 */
   
/* Define to allow pcretest to be linked with libedit. *//* Define to any value to allow pcretest to be linked with libedit. */
 /* #undef SUPPORT_LIBEDIT */  /* #undef SUPPORT_LIBEDIT */
   
/* Define to allow pcretest to be linked with libreadline. *//* Define to any value to allow pcretest to be linked with libreadline. */
 /* #undef SUPPORT_LIBREADLINE */  /* #undef SUPPORT_LIBREADLINE */
   
/* Define to allow pcregrep to be linked with libz, so that it is able to/* Define to any value to allow pcregrep to be linked with libz, so that it is
   handle .gz files. */   able to handle .gz files. */
 /* #undef SUPPORT_LIBZ */  /* #undef SUPPORT_LIBZ */
   
/* Define to enable the 16 bit PCRE library. *//* Define to any value to enable the 16 bit PCRE library. */
 /* #undef SUPPORT_PCRE16 */  /* #undef SUPPORT_PCRE16 */
   
/* Define to enable the 8 bit PCRE library. *//* Define to any value to enable the 32 bit PCRE library. */
#ifndef SUPPORT_PCRE8/* #undef SUPPORT_PCRE32 */
#define SUPPORT_PCRE8 /**/ 
#endif 
   
/* Define to enable JIT support in pcregrep. *//* Define to any value to enable the 8 bit PCRE library. */
 /* #undef SUPPORT_PCRE8 */
 
 /* Define to any value to enable JIT support in pcregrep. */
 /* #undef SUPPORT_PCREGREP_JIT */  /* #undef SUPPORT_PCREGREP_JIT */
   
/* Define to enable support for Unicode properties. *//* Define to any value to enable support for Unicode properties. */
 /* #undef SUPPORT_UCP */  /* #undef SUPPORT_UCP */
   
/* Define to enable support for the UTF-8/16 Unicode encoding. This will work/* Define to any value to enable support for the UTF-8/16/32 Unicode encoding.
   even in an EBCDIC environment, but it is incompatible with the EBCDIC   This will work even in an EBCDIC environment, but it is incompatible with
   macro. That is, PCRE can support *either* EBCDIC code *or* ASCII/UTF-8/16,   the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or*
   but not both at once. */   ASCII/UTF-8/16/32, but not both at once. */
 /* #undef SUPPORT_UTF */  /* #undef SUPPORT_UTF */
   
   /* Define to any value for valgrind support to find invalid memory reads. */
   /* #undef SUPPORT_VALGRIND */
   
 /* Version number of package */  /* Version number of package */
#ifndef VERSION#define VERSION "8.33"
#define VERSION "8.31" 
#endif 
   
 /* Define to empty if `const' does not conform to ANSI C. */  /* Define to empty if `const' does not conform to ANSI C. */
 /* #undef const */  /* #undef const */

Removed from v.1.1.1.3  
changed lines
  Added in v.1.1.1.4


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>