Annotation of embedaddon/pcre/config.h.generic, revision 1.1.1.2
1.1 misho 1: /* config.h. Generated from config.h.in by configure. */
2: /* config.h.in. Generated from configure.ac by autoheader. */
3:
4:
5: /* On Unix-like systems config.h.in is converted by "configure" into config.h.
6: Some other environments also support the use of "configure". PCRE is written in
7: Standard C, but there are a few non-standard things it can cope with, allowing
8: it to run on SunOS4 and other "close to standard" systems.
9:
10: If you are going to build PCRE "by hand" on a system without "configure" you
11: should copy the distributed config.h.generic to config.h, and then set up the
12: macro definitions the way you need them. You must then add -DHAVE_CONFIG_H to
13: all of your compile commands, so that config.h is included at the start of
14: every source.
15:
16: Alternatively, you can avoid editing by using -D on the compiler command line
17: to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H.
18:
19: PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if
20: HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set
21: them both to 0; an emulation function will be used. */
22:
23: /* By default, the \R escape sequence matches any Unicode line ending
24: character or sequence of characters. If BSR_ANYCRLF is defined, this is
25: changed so that backslash-R matches only CR, LF, or CRLF. The build- time
26: default can be overridden by the user of PCRE at runtime. On systems that
27: support it, "configure" can be used to override the default. */
28: /* #undef BSR_ANYCRLF */
29:
30: /* If you are compiling for a system that uses EBCDIC instead of ASCII
31: character codes, define this macro as 1. On systems that can use
32: "configure", this can be done via --enable-ebcdic. PCRE will then assume
33: that all input strings are in EBCDIC. If you do not define this macro, PCRE
1.1.1.2 ! misho 34: will assume input strings are ASCII or UTF-8/16 Unicode. It is not possible
! 35: to build a version of PCRE that supports both EBCDIC and UTF-8/16. */
1.1 misho 36: /* #undef EBCDIC */
37:
38: /* Define to 1 if you have the `bcopy' function. */
39: #ifndef HAVE_BCOPY
40: #define HAVE_BCOPY 1
41: #endif
42:
43: /* Define to 1 if you have the <bits/type_traits.h> header file. */
44: /* #undef HAVE_BITS_TYPE_TRAITS_H */
45:
46: /* Define to 1 if you have the <bzlib.h> header file. */
47: #ifndef HAVE_BZLIB_H
48: #define HAVE_BZLIB_H 1
49: #endif
50:
51: /* Define to 1 if you have the <dirent.h> header file. */
52: #ifndef HAVE_DIRENT_H
53: #define HAVE_DIRENT_H 1
54: #endif
55:
56: /* Define to 1 if you have the <dlfcn.h> header file. */
57: #ifndef HAVE_DLFCN_H
58: #define HAVE_DLFCN_H 1
59: #endif
60:
61: /* Define to 1 if you have the <inttypes.h> header file. */
62: #ifndef HAVE_INTTYPES_H
63: #define HAVE_INTTYPES_H 1
64: #endif
65:
66: /* Define to 1 if you have the <limits.h> header file. */
67: #ifndef HAVE_LIMITS_H
68: #define HAVE_LIMITS_H 1
69: #endif
70:
71: /* Define to 1 if the system has the type `long long'. */
72: #ifndef HAVE_LONG_LONG
73: #define HAVE_LONG_LONG 1
74: #endif
75:
76: /* Define to 1 if you have the `memmove' function. */
77: #ifndef HAVE_MEMMOVE
78: #define HAVE_MEMMOVE 1
79: #endif
80:
81: /* Define to 1 if you have the <memory.h> header file. */
82: #ifndef HAVE_MEMORY_H
83: #define HAVE_MEMORY_H 1
84: #endif
85:
86: /* Define to 1 if you have the <readline/history.h> header file. */
87: #ifndef HAVE_READLINE_HISTORY_H
88: #define HAVE_READLINE_HISTORY_H 1
89: #endif
90:
91: /* Define to 1 if you have the <readline/readline.h> header file. */
92: #ifndef HAVE_READLINE_READLINE_H
93: #define HAVE_READLINE_READLINE_H 1
94: #endif
95:
96: /* Define to 1 if you have the <stdint.h> header file. */
97: #ifndef HAVE_STDINT_H
98: #define HAVE_STDINT_H 1
99: #endif
100:
101: /* Define to 1 if you have the <stdlib.h> header file. */
102: #ifndef HAVE_STDLIB_H
103: #define HAVE_STDLIB_H 1
104: #endif
105:
106: /* Define to 1 if you have the `strerror' function. */
107: #ifndef HAVE_STRERROR
108: #define HAVE_STRERROR 1
109: #endif
110:
111: /* Define to 1 if you have the <string> header file. */
112: #ifndef HAVE_STRING
113: #define HAVE_STRING 1
114: #endif
115:
116: /* Define to 1 if you have the <strings.h> header file. */
117: #ifndef HAVE_STRINGS_H
118: #define HAVE_STRINGS_H 1
119: #endif
120:
121: /* Define to 1 if you have the <string.h> header file. */
122: #ifndef HAVE_STRING_H
123: #define HAVE_STRING_H 1
124: #endif
125:
126: /* Define to 1 if you have `strtoimax'. */
127: /* #undef HAVE_STRTOIMAX */
128:
129: /* Define to 1 if you have `strtoll'. */
130: /* #undef HAVE_STRTOLL */
131:
132: /* Define to 1 if you have `strtoq'. */
133: #ifndef HAVE_STRTOQ
134: #define HAVE_STRTOQ 1
135: #endif
136:
137: /* Define to 1 if you have the <sys/stat.h> header file. */
138: #ifndef HAVE_SYS_STAT_H
139: #define HAVE_SYS_STAT_H 1
140: #endif
141:
142: /* Define to 1 if you have the <sys/types.h> header file. */
143: #ifndef HAVE_SYS_TYPES_H
144: #define HAVE_SYS_TYPES_H 1
145: #endif
146:
147: /* Define to 1 if you have the <type_traits.h> header file. */
148: /* #undef HAVE_TYPE_TRAITS_H */
149:
150: /* Define to 1 if you have the <unistd.h> header file. */
151: #ifndef HAVE_UNISTD_H
152: #define HAVE_UNISTD_H 1
153: #endif
154:
155: /* Define to 1 if the system has the type `unsigned long long'. */
156: #ifndef HAVE_UNSIGNED_LONG_LONG
157: #define HAVE_UNSIGNED_LONG_LONG 1
158: #endif
159:
160: /* Define to 1 if you have the <windows.h> header file. */
161: /* #undef HAVE_WINDOWS_H */
162:
163: /* Define to 1 if you have the <zlib.h> header file. */
164: #ifndef HAVE_ZLIB_H
165: #define HAVE_ZLIB_H 1
166: #endif
167:
168: /* Define to 1 if you have `_strtoi64'. */
169: /* #undef HAVE__STRTOI64 */
170:
171: /* The value of LINK_SIZE determines the number of bytes used to store links
172: as offsets within the compiled regex. The default is 2, which allows for
173: compiled patterns up to 64K long. This covers the vast majority of cases.
174: However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows
175: for longer patterns in extreme cases. On systems that support it,
176: "configure" can be used to override this default. */
177: #ifndef LINK_SIZE
178: #define LINK_SIZE 2
179: #endif
180:
181: /* Define to the sub-directory in which libtool stores uninstalled libraries.
182: */
183: #ifndef LT_OBJDIR
184: #define LT_OBJDIR ".libs/"
185: #endif
186:
187: /* The value of MATCH_LIMIT determines the default number of times the
188: internal match() function can be called during a single execution of
189: pcre_exec(). There is a runtime interface for setting a different limit.
190: The limit exists in order to catch runaway regular expressions that take
191: for ever to determine that they do not match. The default is set very large
192: so that it does not accidentally catch legitimate cases. On systems that
193: support it, "configure" can be used to override this default default. */
194: #ifndef MATCH_LIMIT
195: #define MATCH_LIMIT 10000000
196: #endif
197:
198: /* The above limit applies to all calls of match(), whether or not they
199: increase the recursion depth. In some environments it is desirable to limit
200: the depth of recursive calls of match() more strictly, in order to restrict
201: the maximum amount of stack (or heap, if NO_RECURSE is defined) that is
202: used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of
203: match(). To have any useful effect, it must be less than the value of
204: MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is
205: a runtime method for setting a different limit. On systems that support it,
206: "configure" can be used to override the default. */
207: #ifndef MATCH_LIMIT_RECURSION
208: #define MATCH_LIMIT_RECURSION MATCH_LIMIT
209: #endif
210:
211: /* This limit is parameterized just in case anybody ever wants to change it.
212: Care must be taken if it is increased, because it guards against integer
213: overflow caused by enormously large patterns. */
214: #ifndef MAX_NAME_COUNT
215: #define MAX_NAME_COUNT 10000
216: #endif
217:
218: /* This limit is parameterized just in case anybody ever wants to change it.
219: Care must be taken if it is increased, because it guards against integer
220: overflow caused by enormously large patterns. */
221: #ifndef MAX_NAME_SIZE
222: #define MAX_NAME_SIZE 32
223: #endif
224:
225: /* The value of NEWLINE determines the newline character sequence. On systems
226: that support it, "configure" can be used to override the default, which is
227: 10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or -2
228: (ANYCRLF). */
229: #ifndef NEWLINE
230: #define NEWLINE 10
231: #endif
232:
233: /* PCRE uses recursive function calls to handle backtracking while matching.
234: This can sometimes be a problem on systems that have stacks of limited
235: size. Define NO_RECURSE to get a version that doesn't use recursion in the
236: match() function; instead it creates its own stack by steam using
237: pcre_recurse_malloc() to obtain memory from the heap. For more detail, see
238: the comments and other stuff just above the match() function. On systems
239: that support it, "configure" can be used to set this in the Makefile (use
240: --disable-stack-for-recursion). */
241: /* #undef NO_RECURSE */
242:
243: /* Name of package */
244: #define PACKAGE "pcre"
245:
246: /* Define to the address where bug reports for this package should be sent. */
247: #define PACKAGE_BUGREPORT ""
248:
249: /* Define to the full name of this package. */
250: #define PACKAGE_NAME "PCRE"
251:
252: /* Define to the full name and version of this package. */
1.1.1.2 ! misho 253: #define PACKAGE_STRING "PCRE 8.30"
1.1 misho 254:
255: /* Define to the one symbol short name of this package. */
256: #define PACKAGE_TARNAME "pcre"
257:
258: /* Define to the home page for this package. */
259: #define PACKAGE_URL ""
260:
261: /* Define to the version of this package. */
1.1.1.2 ! misho 262: #define PACKAGE_VERSION "8.30"
1.1 misho 263:
264: /* The value of PCREGREP_BUFSIZE determines the size of buffer used by
265: pcregrep to hold parts of the file it is searching. On systems that support
266: it, "configure" can be used to override the default, which is 8192. This is
267: also the minimum value. The actual amount of memory used by pcregrep is
268: three times this number, because it allows for the buffering of "before"
269: and "after" lines. */
270: #ifndef PCREGREP_BUFSIZE
271: #define PCREGREP_BUFSIZE 20480
272: #endif
273:
274:
275: /* If you are compiling for a system other than a Unix-like system or
276: Win32, and it needs some magic to be inserted before the definition
277: of a function that is exported by the library, define this macro to
278: contain the relevant magic. If you do not define this macro, it
279: defaults to "extern" for a C compiler and "extern C" for a C++
280: compiler on non-Win32 systems. This macro apears at the start of
281: every exported function that is part of the external API. It does
282: not appear on functions that are "external" in the C sense, but
283: which are internal to the library. */
284: /* #undef PCRE_EXP_DEFN */
285:
286: /* Define if linking statically (TODO: make nice with Libtool) */
287: /* #undef PCRE_STATIC */
288:
289: /* When calling PCRE via the POSIX interface, additional working storage is
290: required for holding the pointers to capturing substrings because PCRE
291: requires three integers per substring, whereas the POSIX interface provides
292: only two. If the number of expected substrings is small, the wrapper
293: function uses space on the stack, because this is faster than using
294: malloc() for each call. The threshold above which the stack is no longer
295: used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it,
296: "configure" can be used to override this default. */
297: #ifndef POSIX_MALLOC_THRESHOLD
298: #define POSIX_MALLOC_THRESHOLD 10
299: #endif
300:
301: /* Define to 1 if you have the ANSI C header files. */
302: #ifndef STDC_HEADERS
303: #define STDC_HEADERS 1
304: #endif
305:
306: /* Define to enable support for Just-In-Time compiling. */
307: /* #undef SUPPORT_JIT */
308:
309: /* Define to allow pcregrep to be linked with libbz2, so that it is able to
310: handle .bz2 files. */
311: /* #undef SUPPORT_LIBBZ2 */
312:
313: /* Define to allow pcretest to be linked with libreadline. */
314: /* #undef SUPPORT_LIBREADLINE */
315:
316: /* Define to allow pcregrep to be linked with libz, so that it is able to
317: handle .gz files. */
318: /* #undef SUPPORT_LIBZ */
319:
1.1.1.2 ! misho 320: /* Define to enable the 16 bit PCRE library. */
! 321: /* #undef SUPPORT_PCRE16 */
! 322:
! 323: /* Define to enable the 8 bit PCRE library. */
! 324: #ifndef SUPPORT_PCRE8
! 325: #define SUPPORT_PCRE8 /**/
! 326: #endif
! 327:
1.1 misho 328: /* Define to enable JIT support in pcregrep. */
329: /* #undef SUPPORT_PCREGREP_JIT */
330:
331: /* Define to enable support for Unicode properties. */
332: /* #undef SUPPORT_UCP */
333:
1.1.1.2 ! misho 334: /* Define to enable support for the UTF-8/16 Unicode encoding. This will work
1.1 misho 335: even in an EBCDIC environment, but it is incompatible with the EBCDIC
1.1.1.2 ! misho 336: macro. That is, PCRE can support *either* EBCDIC code *or* ASCII/UTF-8/16,
! 337: but not both at once. */
! 338: /* #undef SUPPORT_UTF */
1.1 misho 339:
340: /* Version number of package */
341: #ifndef VERSION
1.1.1.2 ! misho 342: #define VERSION "8.30"
1.1 misho 343: #endif
344:
345: /* Define to empty if `const' does not conform to ANSI C. */
346: /* #undef const */
347:
348: /* Define to the type of a signed integer type of width exactly 64 bits if
349: such a type exists and the standard includes do not define it. */
350: /* #undef int64_t */
351:
352: /* Define to `unsigned int' if <sys/types.h> does not define. */
353: /* #undef size_t */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to config.h.generic CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / pcre