--- embedaddon/pcre/doc/pcreapi.3 2012/10/09 09:19:17 1.1.1.3 +++ embedaddon/pcre/doc/pcreapi.3 2014/06/15 19:46:05 1.1.1.5 @@ -1,4 +1,4 @@ -.TH PCREAPI 3 "04 May 2012" "PCRE 8.31" +.TH PCREAPI 3 "12 November 2013" "PCRE 8.34" .SH NAME PCRE - Perl-compatible regular expressions .sp @@ -8,156 +8,148 @@ PCRE - Perl-compatible regular expressions .SH "PCRE NATIVE API BASIC FUNCTIONS" .rs .sp -.SM +.nf .B pcre *pcre_compile(const char *\fIpattern\fP, int \fIoptions\fP, -.ti +5n -.B const char **\fIerrptr\fP, int *\fIerroffset\fP, -.ti +5n -.B const unsigned char *\fItableptr\fP); -.PP +.B " const char **\fIerrptr\fP, int *\fIerroffset\fP," +.B " const unsigned char *\fItableptr\fP);" +.sp .B pcre *pcre_compile2(const char *\fIpattern\fP, int \fIoptions\fP, -.ti +5n -.B int *\fIerrorcodeptr\fP, -.ti +5n -.B const char **\fIerrptr\fP, int *\fIerroffset\fP, -.ti +5n -.B const unsigned char *\fItableptr\fP); -.PP +.B " int *\fIerrorcodeptr\fP," +.B " const char **\fIerrptr\fP, int *\fIerroffset\fP," +.B " const unsigned char *\fItableptr\fP);" +.sp .B pcre_extra *pcre_study(const pcre *\fIcode\fP, int \fIoptions\fP, -.ti +5n -.B const char **\fIerrptr\fP); -.PP +.B " const char **\fIerrptr\fP);" +.sp .B void pcre_free_study(pcre_extra *\fIextra\fP); -.PP +.sp .B int pcre_exec(const pcre *\fIcode\fP, "const pcre_extra *\fIextra\fP," -.ti +5n -.B "const char *\fIsubject\fP," int \fIlength\fP, int \fIstartoffset\fP, -.ti +5n -.B int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP); -.PP +.B " const char *\fIsubject\fP, int \fIlength\fP, int \fIstartoffset\fP," +.B " int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP);" +.sp .B int pcre_dfa_exec(const pcre *\fIcode\fP, "const pcre_extra *\fIextra\fP," -.ti +5n -.B "const char *\fIsubject\fP," int \fIlength\fP, int \fIstartoffset\fP, -.ti +5n -.B int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP, -.ti +5n -.B int *\fIworkspace\fP, int \fIwscount\fP); +.B " const char *\fIsubject\fP, int \fIlength\fP, int \fIstartoffset\fP," +.B " int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP," +.B " int *\fIworkspace\fP, int \fIwscount\fP);" +.fi . . .SH "PCRE NATIVE API STRING EXTRACTION FUNCTIONS" .rs .sp +.nf .B int pcre_copy_named_substring(const pcre *\fIcode\fP, -.ti +5n -.B const char *\fIsubject\fP, int *\fIovector\fP, -.ti +5n -.B int \fIstringcount\fP, const char *\fIstringname\fP, -.ti +5n -.B char *\fIbuffer\fP, int \fIbuffersize\fP); -.PP +.B " const char *\fIsubject\fP, int *\fIovector\fP," +.B " int \fIstringcount\fP, const char *\fIstringname\fP," +.B " char *\fIbuffer\fP, int \fIbuffersize\fP);" +.sp .B int pcre_copy_substring(const char *\fIsubject\fP, int *\fIovector\fP, -.ti +5n -.B int \fIstringcount\fP, int \fIstringnumber\fP, char *\fIbuffer\fP, -.ti +5n -.B int \fIbuffersize\fP); -.PP +.B " int \fIstringcount\fP, int \fIstringnumber\fP, char *\fIbuffer\fP," +.B " int \fIbuffersize\fP);" +.sp .B int pcre_get_named_substring(const pcre *\fIcode\fP, -.ti +5n -.B const char *\fIsubject\fP, int *\fIovector\fP, -.ti +5n -.B int \fIstringcount\fP, const char *\fIstringname\fP, -.ti +5n -.B const char **\fIstringptr\fP); -.PP +.B " const char *\fIsubject\fP, int *\fIovector\fP," +.B " int \fIstringcount\fP, const char *\fIstringname\fP," +.B " const char **\fIstringptr\fP);" +.sp .B int pcre_get_stringnumber(const pcre *\fIcode\fP, -.ti +5n -.B const char *\fIname\fP); -.PP +.B " const char *\fIname\fP);" +.sp .B int pcre_get_stringtable_entries(const pcre *\fIcode\fP, -.ti +5n -.B const char *\fIname\fP, char **\fIfirst\fP, char **\fIlast\fP); -.PP +.B " const char *\fIname\fP, char **\fIfirst\fP, char **\fIlast\fP);" +.sp .B int pcre_get_substring(const char *\fIsubject\fP, int *\fIovector\fP, -.ti +5n -.B int \fIstringcount\fP, int \fIstringnumber\fP, -.ti +5n -.B const char **\fIstringptr\fP); -.PP +.B " int \fIstringcount\fP, int \fIstringnumber\fP," +.B " const char **\fIstringptr\fP);" +.sp .B int pcre_get_substring_list(const char *\fIsubject\fP, -.ti +5n -.B int *\fIovector\fP, int \fIstringcount\fP, "const char ***\fIlistptr\fP);" -.PP +.B " int *\fIovector\fP, int \fIstringcount\fP, const char ***\fIlistptr\fP);" +.sp .B void pcre_free_substring(const char *\fIstringptr\fP); -.PP +.sp .B void pcre_free_substring_list(const char **\fIstringptr\fP); +.fi . . .SH "PCRE NATIVE API AUXILIARY FUNCTIONS" .rs .sp +.nf +.B int pcre_jit_exec(const pcre *\fIcode\fP, "const pcre_extra *\fIextra\fP," +.B " const char *\fIsubject\fP, int \fIlength\fP, int \fIstartoffset\fP," +.B " int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP," +.B " pcre_jit_stack *\fIjstack\fP);" +.sp .B pcre_jit_stack *pcre_jit_stack_alloc(int \fIstartsize\fP, int \fImaxsize\fP); -.PP +.sp .B void pcre_jit_stack_free(pcre_jit_stack *\fIstack\fP); -.PP +.sp .B void pcre_assign_jit_stack(pcre_extra *\fIextra\fP, -.ti +5n -.B pcre_jit_callback \fIcallback\fP, void *\fIdata\fP); -.PP +.B " pcre_jit_callback \fIcallback\fP, void *\fIdata\fP);" +.sp .B const unsigned char *pcre_maketables(void); -.PP +.sp .B int pcre_fullinfo(const pcre *\fIcode\fP, "const pcre_extra *\fIextra\fP," -.ti +5n -.B int \fIwhat\fP, void *\fIwhere\fP); -.PP +.B " int \fIwhat\fP, void *\fIwhere\fP);" +.sp .B int pcre_refcount(pcre *\fIcode\fP, int \fIadjust\fP); -.PP +.sp .B int pcre_config(int \fIwhat\fP, void *\fIwhere\fP); -.PP +.sp .B const char *pcre_version(void); -.PP +.sp .B int pcre_pattern_to_host_byte_order(pcre *\fIcode\fP, -.ti +5n -.B pcre_extra *\fIextra\fP, const unsigned char *\fItables\fP); +.B " pcre_extra *\fIextra\fP, const unsigned char *\fItables\fP);" +.fi . . .SH "PCRE NATIVE API INDIRECTED FUNCTIONS" .rs .sp +.nf .B void *(*pcre_malloc)(size_t); -.PP +.sp .B void (*pcre_free)(void *); -.PP +.sp .B void *(*pcre_stack_malloc)(size_t); -.PP +.sp .B void (*pcre_stack_free)(void *); -.PP +.sp .B int (*pcre_callout)(pcre_callout_block *); +.fi . . -.SH "PCRE 8-BIT AND 16-BIT LIBRARIES" +.SH "PCRE 8-BIT, 16-BIT, AND 32-BIT LIBRARIES" .rs .sp -From release 8.30, PCRE can be compiled as a library for handling 16-bit -character strings as well as, or instead of, the original library that handles -8-bit character strings. To avoid too much complication, this document -describes the 8-bit versions of the functions, with only occasional references -to the 16-bit library. +As well as support for 8-bit character strings, PCRE also supports 16-bit +strings (from release 8.30) and 32-bit strings (from release 8.32), by means of +two additional libraries. They can be built as well as, or instead of, the +8-bit library. To avoid too much complication, this document describes the +8-bit versions of the functions, with only occasional references to the 16-bit +and 32-bit libraries. .P -The 16-bit functions operate in the same way as their 8-bit counterparts; they -just use different data types for their arguments and results, and their names -start with \fBpcre16_\fP instead of \fBpcre_\fP. For every option that has UTF8 -in its name (for example, PCRE_UTF8), there is a corresponding 16-bit name with -UTF8 replaced by UTF16. This facility is in fact just cosmetic; the 16-bit -option names define the same bit values. +The 16-bit and 32-bit functions operate in the same way as their 8-bit +counterparts; they just use different data types for their arguments and +results, and their names start with \fBpcre16_\fP or \fBpcre32_\fP instead of +\fBpcre_\fP. For every option that has UTF8 in its name (for example, +PCRE_UTF8), there are corresponding 16-bit and 32-bit names with UTF8 replaced +by UTF16 or UTF32, respectively. This facility is in fact just cosmetic; the +16-bit and 32-bit option names define the same bit values. .P References to bytes and UTF-8 in this document should be read as references to -16-bit data quantities and UTF-16 when using the 16-bit library, unless -specified otherwise. More details of the specific differences for the 16-bit -library are given in the +16-bit data units and UTF-16 when using the 16-bit library, or 32-bit data +units and UTF-32 when using the 32-bit library, unless specified otherwise. +More details of the specific differences for the 16-bit and 32-bit libraries +are given in the .\" HREF \fBpcre16\fP .\" -page. +and +.\" HREF +\fBpcre32\fP +.\" +pages. . . .SH "PCRE API OVERVIEW" @@ -213,7 +205,9 @@ used if available, by setting an option that is ignore relevant. More complicated programs might need to make use of the functions \fBpcre_jit_stack_alloc()\fP, \fBpcre_jit_stack_free()\fP, and \fBpcre_assign_jit_stack()\fP in order to control the JIT code's memory usage. -These functions are discussed in the +.P +From release 8.32 there is also a direct interface for JIT execution, which +gives improved performance. The JIT-specific functions are discussed in the .\" HREF \fBpcrejit\fP .\" @@ -392,16 +386,24 @@ not recognized. The following information is available PCRE_CONFIG_UTF8 .sp The output is an integer that is set to one if UTF-8 support is available; -otherwise it is set to zero. If this option is given to the 16-bit version of -this function, \fBpcre16_config()\fP, the result is PCRE_ERROR_BADOPTION. +otherwise it is set to zero. This value should normally be given to the 8-bit +version of this function, \fBpcre_config()\fP. If it is given to the 16-bit +or 32-bit version of this function, the result is PCRE_ERROR_BADOPTION. .sp PCRE_CONFIG_UTF16 .sp The output is an integer that is set to one if UTF-16 support is available; otherwise it is set to zero. This value should normally be given to the 16-bit version of this function, \fBpcre16_config()\fP. If it is given to the 8-bit -version of this function, the result is PCRE_ERROR_BADOPTION. +or 32-bit version of this function, the result is PCRE_ERROR_BADOPTION. .sp + PCRE_CONFIG_UTF32 +.sp +The output is an integer that is set to one if UTF-32 support is available; +otherwise it is set to zero. This value should normally be given to the 32-bit +version of this function, \fBpcre32_config()\fP. If it is given to the 8-bit +or 16-bit version of this function, the result is PCRE_ERROR_BADOPTION. +.sp PCRE_CONFIG_UNICODE_PROPERTIES .sp The output is an integer that is set to one if support for Unicode character @@ -422,11 +424,13 @@ unaligned)". If JIT support is not available, the resu PCRE_CONFIG_NEWLINE .sp The output is an integer whose value specifies the default character sequence -that is recognized as meaning "newline". The four values that are supported -are: 10 for LF, 13 for CR, 3338 for CRLF, -2 for ANYCRLF, and -1 for ANY. -Though they are derived from ASCII, the same values are returned in EBCDIC -environments. The default should normally correspond to the standard sequence -for your operating system. +that is recognized as meaning "newline". The values that are supported in +ASCII/Unicode environments are: 10 for LF, 13 for CR, 3338 for CRLF, -2 for +ANYCRLF, and -1 for ANY. In EBCDIC environments, CR, ANYCRLF, and ANY yield the +same values. However, the value for LF is normally 21, though some EBCDIC +environments use 37. The corresponding values for CRLF are 3349 and 3365. The +default should normally correspond to the standard sequence for your operating +system. .sp PCRE_CONFIG_BSR .sp @@ -440,10 +444,11 @@ or CRLF. The default can be overridden when a pattern The output is an integer that contains the number of bytes used for internal linkage in compiled regular expressions. For the 8-bit library, the value can be 2, 3, or 4. For the 16-bit library, the value is either 2 or 4 and is still -a number of bytes. The default value of 2 is sufficient for all but the most -massive patterns, since it allows the compiled pattern to be up to 64K in size. -Larger values allow larger regular expressions to be compiled, at the expense -of slower matching. +a number of bytes. For the 32-bit library, the value is either 2 or 4 and is +still a number of bytes. The default value of 2 is sufficient for all but the +most massive patterns, since it allows the compiled pattern to be up to 64K in +size. Larger values allow larger regular expressions to be compiled, at the +expense of slower matching. .sp PCRE_CONFIG_POSIX_MALLOC_THRESHOLD .sp @@ -455,6 +460,13 @@ the .\" documentation. .sp + PCRE_CONFIG_PARENS_LIMIT +.sp +The output is a long integer that gives the maximum depth of nesting of +parentheses (of any kind) in a pattern. This limit is imposed to cap the amount +of system stack used when a pattern is compiled. It is specified when PCRE is +built; the default is 250. +.sp PCRE_CONFIG_MATCH_LIMIT .sp The output is a long integer that gives the default limit for the number of @@ -481,19 +493,16 @@ avoiding the use of the stack. .SH "COMPILING A PATTERN" .rs .sp +.nf .B pcre *pcre_compile(const char *\fIpattern\fP, int \fIoptions\fP, -.ti +5n -.B const char **\fIerrptr\fP, int *\fIerroffset\fP, -.ti +5n -.B const unsigned char *\fItableptr\fP); +.B " const char **\fIerrptr\fP, int *\fIerroffset\fP," +.B " const unsigned char *\fItableptr\fP);" .sp .B pcre *pcre_compile2(const char *\fIpattern\fP, int \fIoptions\fP, -.ti +5n -.B int *\fIerrorcodeptr\fP, -.ti +5n -.B const char **\fIerrptr\fP, int *\fIerroffset\fP, -.ti +5n -.B const unsigned char *\fItableptr\fP); +.B " int *\fIerrorcodeptr\fP," +.B " const char **\fIerrptr\fP, int *\fIerroffset\fP," +.B " const unsigned char *\fItableptr\fP);" +.fi .P Either of the functions \fBpcre_compile()\fP or \fBpcre_compile2()\fP can be called to compile a pattern into an internal form. The only difference between @@ -534,15 +543,15 @@ Otherwise, if compilation of a pattern fails, \fBpcre_ NULL, and sets the variable pointed to by \fIerrptr\fP to point to a textual error message. This is a static string that is part of the library. You must not try to free it. Normally, the offset from the start of the pattern to the -byte that was being processed when the error was discovered is placed in the -variable pointed to by \fIerroffset\fP, which must not be NULL (if it is, an -immediate error is given). However, for an invalid UTF-8 string, the offset is -that of the first byte of the failing character. +data unit that was being processed when the error was discovered is placed in +the variable pointed to by \fIerroffset\fP, which must not be NULL (if it is, +an immediate error is given). However, for an invalid UTF-8 or UTF-16 string, +the offset is that of the first data unit of the failing character. .P Some errors are not detected until the whole pattern has been scanned; in these cases, the offset passed back is the length of the pattern. Note that the -offset is in bytes, not characters, even in UTF-8 mode. It may sometimes point -into the middle of a UTF-8 character. +offset is in data units, not characters, even in a UTF mode. It may sometimes +point into the middle of a UTF-8 or UTF-16 character. .P If \fBpcre_compile2()\fP is used instead of \fBpcre_compile()\fP, and the \fIerrorcodeptr\fP argument is not NULL, a non-zero error code number is @@ -553,8 +562,9 @@ If the final argument, \fItableptr\fP, is NULL, PCRE u character tables that are built when PCRE is compiled, using the default C locale. Otherwise, \fItableptr\fP must be an address that is the result of a call to \fBpcre_maketables()\fP. This value is stored with the compiled -pattern, and used again by \fBpcre_exec()\fP, unless another table pointer is -passed to it. For more discussion, see the section on locale support below. +pattern, and used again by \fBpcre_exec()\fP and \fBpcre_dfa_exec()\fP when the +pattern is matched. For more discussion, see the section on locale support +below. .P This code fragment shows a typical straightforward call to \fBpcre_compile()\fP: .sp @@ -642,13 +652,23 @@ documentation. .sp PCRE_EXTENDED .sp -If this bit is set, white space data characters in the pattern are totally -ignored except when escaped or inside a character class. White space does not -include the VT character (code 11). In addition, characters between an -unescaped # outside a character class and the next newline, inclusive, are also -ignored. This is equivalent to Perl's /x option, and it can be changed within a -pattern by a (?x) option setting. +If this bit is set, most white space characters in the pattern are totally +ignored except when escaped or inside a character class. However, white space +is not allowed within sequences such as (?> that introduce various +parenthesized subpatterns, nor within a numerical quantifier such as {1,3}. +However, ignorable white space is permitted between an item and a following +quantifier and between a quantifier and a following + that indicates +possessiveness. .P +White space did not used to include the VT character (code 11), because Perl +did not treat this character as white space. However, Perl changed at release +5.18, so PCRE followed at release 8.34, and VT is now treated as white space. +.P +PCRE_EXTENDED also causes characters between an unescaped # outside a character +class and the next newline, inclusive, to be ignored. PCRE_EXTENDED is +equivalent to Perl's /x option, and it can be changed within a pattern by a +(?x) option setting. +.P Which characters are interpreted as newlines is controlled by the options passed to \fBpcre_compile()\fP or by a special sequence at the start of the pattern, as described in the section entitled @@ -713,12 +733,14 @@ binary zero character followed by z). .sp PCRE_MULTILINE .sp -By default, PCRE treats the subject string as consisting of a single line of -characters (even if it actually contains newlines). The "start of line" -metacharacter (^) matches only at the start of the string, while the "end of -line" metacharacter ($) matches only at the end of the string, or before a -terminating newline (unless PCRE_DOLLAR_ENDONLY is set). This is the same as -Perl. +By default, for the purposes of matching "start of line" and "end of line", +PCRE treats the subject string as consisting of a single line of characters, +even if it actually contains newlines. The "start of line" metacharacter (^) +matches only at the start of the string, and the "end of line" metacharacter +($) matches only at the end of the string, or before a terminating newline +(except when PCRE_DOLLAR_ENDONLY is set). Note, however, that unless +PCRE_DOTALL is set, the "any character" metacharacter (.) does not match at a +newline. This behaviour (for ^, $, and dot) is the same as Perl. .P When PCRE_MULTILINE it is set, the "start of line" and "end of line" constructs match immediately following or immediately before internal newlines in the @@ -727,6 +749,15 @@ equivalent to Perl's /m option, and it can be changed (?m) option setting. If there are no newlines in a subject string, or no occurrences of ^ or $ in a pattern, setting PCRE_MULTILINE has no effect. .sp + PCRE_NEVER_UTF +.sp +This option locks out interpretation of the pattern as UTF-8 (or UTF-16 or +UTF-32 in the 16-bit and 32-bit libraries). In particular, it prevents the +creator of the pattern from switching to UTF interpretation by starting the +pattern with (*UTF). This may be useful in applications that process patterns +from external sources. The combination of PCRE_UTF8 and PCRE_NEVER_UTF also +causes an error. +.sp PCRE_NEWLINE_CR PCRE_NEWLINE_LF PCRE_NEWLINE_CRLF @@ -739,12 +770,24 @@ indicated by a single character (CR or LF, respectivel PCRE_NEWLINE_CRLF specifies that a newline is indicated by the two-character CRLF sequence. Setting PCRE_NEWLINE_ANYCRLF specifies that any of the three preceding sequences should be recognized. Setting PCRE_NEWLINE_ANY specifies -that any Unicode newline sequence should be recognized. The Unicode newline -sequences are the three just mentioned, plus the single characters VT (vertical -tab, U+000B), FF (form feed, U+000C), NEL (next line, U+0085), LS (line -separator, U+2028), and PS (paragraph separator, U+2029). For the 8-bit -library, the last two are recognized only in UTF-8 mode. +that any Unicode newline sequence should be recognized. .P +In an ASCII/Unicode environment, the Unicode newline sequences are the three +just mentioned, plus the single characters VT (vertical tab, U+000B), FF (form +feed, U+000C), NEL (next line, U+0085), LS (line separator, U+2028), and PS +(paragraph separator, U+2029). For the 8-bit library, the last two are +recognized only in UTF-8 mode. +.P +When PCRE is compiled to run in an EBCDIC (mainframe) environment, the code for +CR is 0x0d, the same as ASCII. However, the character code for LF is normally +0x15, though in some EBCDIC environments 0x25 is used. Whichever of these is +not LF is made to correspond to Unicode's NEL character. EBCDIC codes are all +less than 256. For more details, see the +.\" HREF +\fBpcrebuild\fP +.\" +documentation. +.P The newline setting in the options word uses three bits that are treated as a number, giving eight possibilities. Currently only six are used (default plus the five values above). This means that if you set more than one newline @@ -770,12 +813,23 @@ were followed by ?: but named parentheses can still be they acquire numbers in the usual way). There is no equivalent of this option in Perl. .sp - NO_START_OPTIMIZE + PCRE_NO_AUTO_POSSESS .sp +If this option is set, it disables "auto-possessification". This is an +optimization that, for example, turns a+b into a++b in order to avoid +backtracks into a+ that can never be successful. However, if callouts are in +use, auto-possessification means that some of them are never taken. You can set +this option if you want the matching functions to do a full unoptimized search +and run all the callouts, but it is mainly provided for testing purposes. +.sp + PCRE_NO_START_OPTIMIZE +.sp This is an option that acts at matching time; that is, it is really an option for \fBpcre_exec()\fP or \fBpcre_dfa_exec()\fP. If it is set at compile time, -it is remembered with the compiled pattern and assumed at matching time. For -details see the discussion of PCRE_NO_START_OPTIMIZE +it is remembered with the compiled pattern and assumed at matching time. This +is necessary if you want to use JIT execution, because the JIT compiler needs +to know whether or not this option is set. For details see the discussion of +PCRE_NO_START_OPTIMIZE .\" HTML .\" below. @@ -819,8 +873,8 @@ page. .sp PCRE_NO_UTF8_CHECK .sp -When PCRE_UTF8 is set, the validity of the pattern as a UTF-8 -string is automatically checked. There is a discussion about the +When PCRE_UTF8 is set, the validity of the pattern as a UTF-8 string is +automatically checked. There is a discussion about the .\" HTML .\" validity of UTF-8 strings @@ -833,9 +887,11 @@ page. If an invalid UTF-8 sequence is found, \fBpcre_c error. If you already know that your pattern is valid, and you want to skip this check for performance reasons, you can set the PCRE_NO_UTF8_CHECK option. When it is set, the effect of passing an invalid UTF-8 string as a pattern is -undefined. It may cause your program to crash. Note that this option can also -be passed to \fBpcre_exec()\fP and \fBpcre_dfa_exec()\fP, to suppress the -validity checking of subject strings. +undefined. It may cause your program to crash or loop. Note that this option +can also be passed to \fBpcre_exec()\fP and \fBpcre_dfa_exec()\fP, to suppress +the validity checking of subject strings only. If the same string is being +matched many times, the option can be safely set for the second and subsequent +matchings to improve performance. . . .SH "COMPILATION ERROR CODES" @@ -844,8 +900,8 @@ validity checking of subject strings. The following table lists the error codes than may be returned by \fBpcre_compile2()\fP, along with the error messages that may be returned by both compiling functions. Note that error messages are always 8-bit ASCII -strings, even in 16-bit mode. As PCRE has developed, some error codes have -fallen out of use. To avoid confusion, they have not been re-used. +strings, even in 16-bit or 32-bit mode. As PCRE has developed, some error codes +have fallen out of use. To avoid confusion, they have not been re-used. .sp 0 no error 1 \e at end of pattern @@ -881,7 +937,7 @@ fallen out of use. To avoid confusion, they have not b 31 POSIX collating elements are not supported 32 this version of PCRE is compiled without UTF support 33 [this code is not in use] - 34 character value in \ex{...} sequence is too large + 34 character value in \ex{} or \eo{} is too large 35 invalid condition (?(0) 36 \eC not allowed in lookbehind assertion 37 PCRE does not support \eL, \el, \eN{name}, \eU, or \eu @@ -909,7 +965,7 @@ fallen out of use. To avoid confusion, they have not b name/number or by a plain number 58 a numbered reference must not be zero 59 an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT) - 60 (*VERB) not recognized + 60 (*VERB) not recognized or malformed 61 number is too big 62 subpattern name expected 63 digit expected after (?+ @@ -928,6 +984,13 @@ fallen out of use. To avoid confusion, they have not b 74 invalid UTF-16 string (specifically UTF-16) 75 name is too long in (*MARK), (*PRUNE), (*SKIP), or (*THEN) 76 character value in \eu.... sequence is too large + 77 invalid UTF-32 string (specifically UTF-32) + 78 setting UTF is disabled by the application + 79 non-hex character in \ex{} (closing brace missing?) + 80 non-octal character in \eo{} (closing brace missing?) + 81 missing opening brace after \eo + 82 parentheses are too deeply nested + 83 invalid range in character class .sp The numbers 32 and 10000 in errors 48 and 49 are defaults; different values may be used if the limits were changed when PCRE was built. @@ -937,9 +1000,10 @@ be used if the limits were changed when PCRE was built .SH "STUDYING A PATTERN" .rs .sp -.B pcre_extra *pcre_study(const pcre *\fIcode\fP, int \fIoptions\fP -.ti +5n -.B const char **\fIerrptr\fP); +.nf +.B pcre_extra *pcre_study(const pcre *\fIcode\fP, int \fIoptions\fP, +.B " const char **\fIerrptr\fP);" +.fi .PP If a compiled pattern is going to be used several times, it is worth spending more time analyzing it in order to speed up the time taken for matching. The @@ -960,12 +1024,16 @@ below in the section on matching a pattern. .P If studying the pattern does not produce any useful information, -\fBpcre_study()\fP returns NULL. In that circumstance, if the calling program -wants to pass any of the other fields to \fBpcre_exec()\fP or -\fBpcre_dfa_exec()\fP, it must set up its own \fBpcre_extra\fP block. +\fBpcre_study()\fP returns NULL by default. In that circumstance, if the +calling program wants to pass any of the other fields to \fBpcre_exec()\fP or +\fBpcre_dfa_exec()\fP, it must set up its own \fBpcre_extra\fP block. However, +if \fBpcre_study()\fP is called with the PCRE_STUDY_EXTRA_NEEDED option, it +returns a \fBpcre_extra\fP block even if studying did not find any additional +information. It may still return NULL, however, if an error occurs in +\fBpcre_study()\fP. .P The second argument of \fBpcre_study()\fP contains option bits. There are three -options: +further options in addition to PCRE_STUDY_EXTRA_NEEDED: .sp PCRE_STUDY_JIT_COMPILE PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE @@ -974,7 +1042,7 @@ options: If any of these are set, and the just-in-time compiler is available, the pattern is further compiled into machine code that executes much faster than the \fBpcre_exec()\fP interpretive matching function. If the just-in-time -compiler is not available, these options are ignored. All other bits in the +compiler is not available, these options are ignored. All undefined bits in the \fIoptions\fP argument must be zero. .P JIT compilation is a heavyweight optimization. It can take some time for @@ -1022,23 +1090,29 @@ real application there should be tests for errors): Studying a pattern does two things: first, a lower bound for the length of subject string that is needed to match the pattern is computed. This does not mean that there are any strings of that length that match, but it does -guarantee that no shorter strings match. The value is used by -\fBpcre_exec()\fP and \fBpcre_dfa_exec()\fP to avoid wasting time by trying to -match strings that are shorter than the lower bound. You can find out the value -in a calling program via the \fBpcre_fullinfo()\fP function. +guarantee that no shorter strings match. The value is used to avoid wasting +time by trying to match strings that are shorter than the lower bound. You can +find out the value in a calling program via the \fBpcre_fullinfo()\fP function. .P Studying a pattern is also useful for non-anchored patterns that do not have a single fixed starting character. A bitmap of possible starting bytes is created. This speeds up finding a position in the subject at which to start -matching. (In 16-bit mode, the bitmap is used for 16-bit values less than 256.) +matching. (In 16-bit mode, the bitmap is used for 16-bit values less than 256. +In 32-bit mode, the bitmap is used for 32-bit values less than 256.) .P These two optimizations apply to both \fBpcre_exec()\fP and \fBpcre_dfa_exec()\fP, and the information is also used by the JIT compiler. -The optimizations can be disabled by setting the PCRE_NO_START_OPTIMIZE option -when calling \fBpcre_exec()\fP or \fBpcre_dfa_exec()\fP, but if this is done, -JIT execution is also disabled. You might want to do this if your pattern -contains callouts or (*MARK) and you want to make use of these facilities in -cases where matching fails. See the discussion of PCRE_NO_START_OPTIMIZE +The optimizations can be disabled by setting the PCRE_NO_START_OPTIMIZE option. +You might want to do this if your pattern contains callouts or (*MARK) and you +want to make use of these facilities in cases where matching fails. +.P +PCRE_NO_START_OPTIMIZE can be specified at either compile time or execution +time. However, if PCRE_NO_START_OPTIMIZE is passed to \fBpcre_exec()\fP, (that +is, after any JIT compilation has happened) JIT execution is disabled. For JIT +execution to work with PCRE_NO_START_OPTIMIZE, the option must be set at +compile time. +.P +There is a longer discussion of PCRE_NO_START_OPTIMIZE .\" HTML .\" below. @@ -1051,16 +1125,18 @@ below. .sp PCRE handles caseless matching, and determines whether characters are letters, digits, or whatever, by reference to a set of tables, indexed by character -value. When running in UTF-8 mode, this applies only to characters -with codes less than 128. By default, higher-valued codes never match escapes -such as \ew or \ed, but they can be tested with \ep if PCRE is built with -Unicode character property support. Alternatively, the PCRE_UCP option can be -set at compile time; this causes \ew and friends to use Unicode property -support instead of built-in tables. The use of locales with Unicode is -discouraged. If you are handling characters with codes greater than 128, you -should either use UTF-8 and Unicode, or use locales, but not try to mix the -two. +code point. When running in UTF-8 mode, or in the 16- or 32-bit libraries, this +applies only to characters with code points less than 256. By default, +higher-valued code points never match escapes such as \ew or \ed. However, if +PCRE is built with Unicode property support, all characters can be tested with +\ep and \eP, or, alternatively, the PCRE_UCP option can be set when a pattern +is compiled; this causes \ew and friends to use Unicode property support +instead of the built-in tables. .P +The use of locales with Unicode is discouraged. If you are handling characters +with code points greater than 128, you should either use Unicode support, or +use locales, but not try to mix the two. +.P PCRE contains an internal set of tables that are used when the final argument of \fBpcre_compile()\fP is NULL. These are sufficient for many applications. Normally, the internal tables recognize only ASCII characters. However, when @@ -1074,10 +1150,10 @@ for this locale support is expected to die away. .P External tables are built by calling the \fBpcre_maketables()\fP function, which has no arguments, in the relevant locale. The result can then be passed -to \fBpcre_compile()\fP or \fBpcre_exec()\fP as often as necessary. For -example, to build and use tables that are appropriate for the French locale -(where accented characters with values greater than 128 are treated as letters), -the following code could be used: +to \fBpcre_compile()\fP as often as necessary. For example, to build and use +tables that are appropriate for the French locale (where accented characters +with values greater than 128 are treated as letters), the following code could +be used: .sp setlocale(LC_CTYPE, "fr_FR"); tables = pcre_maketables(); @@ -1093,24 +1169,29 @@ needed. .P The pointer that is passed to \fBpcre_compile()\fP is saved with the compiled pattern, and the same tables are used via this pointer by \fBpcre_study()\fP -and normally also by \fBpcre_exec()\fP. Thus, by default, for any single +and also by \fBpcre_exec()\fP and \fBpcre_dfa_exec()\fP. Thus, for any single pattern, compilation, studying and matching all happen in the same locale, but -different patterns can be compiled in different locales. +different patterns can be processed in different locales. .P It is possible to pass a table pointer or NULL (indicating the use of the -internal tables) to \fBpcre_exec()\fP. Although not intended for this purpose, -this facility could be used to match a pattern in a different locale from the -one in which it was compiled. Passing table pointers at run time is discussed -below in the section on matching a pattern. +internal tables) to \fBpcre_exec()\fP or \fBpcre_dfa_exec()\fP (see the +discussion below in the section on matching a pattern). This facility is +provided for use with pre-compiled patterns that have been saved and reloaded. +Character tables are not saved with patterns, so if a non-standard table was +used at compile time, it must be provided again when the reloaded pattern is +matched. Attempting to use this facility to match a pattern in a different +locale from the one in which it was compiled is likely to lead to anomalous +(usually incorrect) results. . . .\" HTML .SH "INFORMATION ABOUT A PATTERN" .rs .sp +.nf .B int pcre_fullinfo(const pcre *\fIcode\fP, "const pcre_extra *\fIextra\fP," -.ti +5n -.B int \fIwhat\fP, void *\fIwhere\fP); +.B " int \fIwhat\fP, void *\fIwhere\fP);" +.fi .PP The \fBpcre_fullinfo()\fP function returns information about a compiled pattern. It replaces the \fBpcre_info()\fP function, which was removed from the @@ -1129,6 +1210,7 @@ the following negative numbers: PCRE_ERROR_BADENDIANNESS the pattern was compiled with different endianness PCRE_ERROR_BADOPTION the value of \fIwhat\fP was invalid + PCRE_ERROR_UNSET the requested field is not set .sp The "magic number" is placed at the start of each compiled pattern as an simple check against passing an arbitrary memory pointer. The endianness error can @@ -1175,8 +1257,8 @@ variable. .P If there is a fixed first value, for example, the letter "c" from a pattern such as (cat|cow|coyote), its value is returned. In the 8-bit library, the -value is always less than 256; in the 16-bit library the value can be up to -0xffff. +value is always less than 256. In the 16-bit library the value can be up to +0xffff. In the 32-bit library the value can be up to 0x10ffff. .P If there is no fixed first value, and if either .sp @@ -1189,6 +1271,11 @@ starts with "^", or -1 is returned, indicating that the pattern matches only at the start of a subject string or after any newline within the string. Otherwise -2 is returned. For anchored patterns, -2 is returned. +.P +Since for the 32-bit library using the non-UTF-32 mode, this function is unable +to return the full 32-bit range of the character, this value is deprecated; +instead the PCRE_INFO_FIRSTCHARACTERFLAGS and PCRE_INFO_FIRSTCHARACTER values +should be used. .sp PCRE_INFO_FIRSTTABLE .sp @@ -1236,23 +1323,45 @@ value, -1 is returned. For anchored patterns, a last l only if it follows something of variable length. For example, for the pattern /^a\ed+z\ed+/ the returned value is "z", but for /^a\edz\ed/ the returned value is -1. +.P +Since for the 32-bit library using the non-UTF-32 mode, this function is unable +to return the full 32-bit range of characters, this value is deprecated; +instead the PCRE_INFO_REQUIREDCHARFLAGS and PCRE_INFO_REQUIREDCHAR values should +be used. .sp + PCRE_INFO_MATCH_EMPTY +.sp +Return 1 if the pattern can match an empty string, otherwise 0. The fourth +argument should point to an \fBint\fP variable. +.sp + PCRE_INFO_MATCHLIMIT +.sp +If the pattern set a match limit by including an item of the form +(*LIMIT_MATCH=nnnn) at the start, the value is returned. The fourth argument +should point to an unsigned 32-bit integer. If no such value has been set, the +call to \fBpcre_fullinfo()\fP returns the error PCRE_ERROR_UNSET. +.sp PCRE_INFO_MAXLOOKBEHIND .sp -Return the number of characters (NB not bytes) in the longest lookbehind -assertion in the pattern. Note that the simple assertions \eb and \eB require a -one-character lookbehind. This information is useful when doing multi-segment -matching using the partial matching facilities. +Return the number of characters (NB not data units) in the longest lookbehind +assertion in the pattern. This information is useful when doing multi-segment +matching using the partial matching facilities. Note that the simple assertions +\eb and \eB require a one-character lookbehind. \eA also registers a +one-character lookbehind, though it does not actually inspect the previous +character. This is to ensure that at least one character from the old segment +is retained when a new segment is processed. Otherwise, if there are no +lookbehinds in the pattern, \eA might match incorrectly at the start of a new +segment. .sp PCRE_INFO_MINLENGTH .sp If the pattern was studied and a minimum length for matching subject strings was computed, its value is returned. Otherwise the returned value is -1. The -value is a number of characters, which in UTF-8 mode may be different from the -number of bytes. The fourth argument should point to an \fBint\fP variable. A -non-negative value is a lower bound to the length of any matching string. There -may not be any strings of that length that do actually match, but every string -that does match is at least that long. +value is a number of characters, which in UTF mode may be different from the +number of data units. The fourth argument should point to an \fBint\fP +variable. A non-negative value is a lower bound to the length of any matching +string. There may not be any strings of that length that do actually match, but +every string that does match is at least that long. .sp PCRE_INFO_NAMECOUNT PCRE_INFO_NAMEENTRYSIZE @@ -1275,11 +1384,13 @@ length of the longest name. PCRE_INFO_NAMETABLE return entry of the table. This is a pointer to \fBchar\fP in the 8-bit library, where the first two bytes of each entry are the number of the capturing parenthesis, most significant byte first. In the 16-bit library, the pointer points to -16-bit data units, the first of which contains the parenthesis number. The rest -of the entry is the corresponding name, zero terminated. +16-bit data units, the first of which contains the parenthesis number. In the +32-bit library, the pointer points to 32-bit data units, the first of which +contains the parenthesis number. The rest of the entry is the corresponding +name, zero terminated. .P -The names are in alphabetical order. Duplicate names may appear if (?| is used -to create multiple groups with the same number, as described in the +The names are in alphabetical order. If (?| is used to create multiple groups +with the same number, as described in the .\" HTML .\" section on duplicate subpattern numbers @@ -1288,11 +1399,13 @@ in the .\" HREF \fBpcrepattern\fP .\" -page. Duplicate names for subpatterns with different numbers are permitted only -if PCRE_DUPNAMES is set. In all cases of duplicate names, they appear in the -table in the order in which they were found in the pattern. In the absence of -(?| this is the order of increasing number; when (?| is used this is not -necessarily the case because later subpatterns may have lower numbers. +page, the groups may be given the same name, but there is only one entry in the +table. Different names for groups of the same number are not permitted. +Duplicate names for subpatterns with different numbers are permitted, +but only if PCRE_DUPNAMES is set. They appear in the table in the order in +which they were found in the pattern. In the absence of (?| this is the order +of increasing number; when (?| is used this is not necessarily the case because +later subpatterns may have lower numbers. .P As a simple example of the name/number table, consider the following pattern after compilation by the 8-bit library (assume PCRE_EXTENDED is set, so white @@ -1349,9 +1462,16 @@ alternatives begin with one of the following: For such patterns, the PCRE_ANCHORED bit is set in the options returned by \fBpcre_fullinfo()\fP. .sp + PCRE_INFO_RECURSIONLIMIT +.sp +If the pattern set a recursion limit by including an item of the form +(*LIMIT_RECURSION=nnnn) at the start, the value is returned. The fourth +argument should point to an unsigned 32-bit integer. If no such value has been +set, the call to \fBpcre_fullinfo()\fP returns the error PCRE_ERROR_UNSET. +.sp PCRE_INFO_SIZE .sp -Return the size of the compiled pattern in bytes (for both libraries). The +Return the size of the compiled pattern in bytes (for all three libraries). The fourth argument should point to a \fBsize_t\fP variable. This value does not include the size of the \fBpcre\fP structure that is returned by \fBpcre_compile()\fP. The value that is passed as the argument to @@ -1362,11 +1482,12 @@ does not alter the value returned by this option. .sp PCRE_INFO_STUDYSIZE .sp -Return the size in bytes of the data block pointed to by the \fIstudy_data\fP -field in a \fBpcre_extra\fP block. If \fBpcre_extra\fP is NULL, or there is no -study data, zero is returned. The fourth argument should point to a -\fBsize_t\fP variable. The \fIstudy_data\fP field is set by \fBpcre_study()\fP -to record information that will speed up matching (see the section entitled +Return the size in bytes (for all three libraries) of the data block pointed to +by the \fIstudy_data\fP field in a \fBpcre_extra\fP block. If \fBpcre_extra\fP +is NULL, or there is no study data, zero is returned. The fourth argument +should point to a \fBsize_t\fP variable. The \fIstudy_data\fP field is set by +\fBpcre_study()\fP to record information that will speed up matching (see the +section entitled .\" HTML .\" "Studying a pattern" @@ -1377,6 +1498,57 @@ is made available via this option so that it can be sa \fBpcreprecompile\fP .\" documentation for details). +.sp + PCRE_INFO_FIRSTCHARACTERFLAGS +.sp +Return information about the first data unit of any matched string, for a +non-anchored pattern. The fourth argument should point to an \fBint\fP +variable. +.P +If there is a fixed first value, for example, the letter "c" from a pattern +such as (cat|cow|coyote), 1 is returned, and the character value can be +retrieved using PCRE_INFO_FIRSTCHARACTER. +.P +If there is no fixed first value, and if either +.sp +(a) the pattern was compiled with the PCRE_MULTILINE option, and every branch +starts with "^", or +.sp +(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not set +(if it were set, the pattern would be anchored), +.sp +2 is returned, indicating that the pattern matches only at the start of a +subject string or after any newline within the string. Otherwise 0 is +returned. For anchored patterns, 0 is returned. +.sp + PCRE_INFO_FIRSTCHARACTER +.sp +Return the fixed first character value in the situation where +PCRE_INFO_FIRSTCHARACTERFLAGS returns 1; otherwise return 0. The fourth +argument should point to an \fBuint_t\fP variable. +.P +In the 8-bit library, the value is always less than 256. In the 16-bit library +the value can be up to 0xffff. In the 32-bit library in UTF-32 mode the value +can be up to 0x10ffff, and up to 0xffffffff when not using UTF-32 mode. +.sp + PCRE_INFO_REQUIREDCHARFLAGS +.sp +Returns 1 if there is a rightmost literal data unit that must exist in any +matched string, other than at its start. The fourth argument should point to +an \fBint\fP variable. If there is no such value, 0 is returned. If returning +1, the character value itself can be retrieved using PCRE_INFO_REQUIREDCHAR. +.P +For anchored patterns, a last literal value is recorded only if it follows +something of variable length. For example, for the pattern /^a\ed+z\ed+/ the +returned value 1 (with "z" returned from PCRE_INFO_REQUIREDCHAR), but for +/^a\edz\ed/ the returned value is 0. +.sp + PCRE_INFO_REQUIREDCHAR +.sp +Return the value of the rightmost literal data unit that must exist in any +matched string, other than at its start, if such a value has been recorded. The +fourth argument should point to an \fBuint32_t\fP variable. If there is no such +value, 0 is returned. . . .SH "REFERENCE COUNTS" @@ -1405,11 +1577,11 @@ is different. (This seems a highly unlikely scenario.) .SH "MATCHING A PATTERN: THE TRADITIONAL FUNCTION" .rs .sp +.nf .B int pcre_exec(const pcre *\fIcode\fP, "const pcre_extra *\fIextra\fP," -.ti +5n -.B "const char *\fIsubject\fP," int \fIlength\fP, int \fIstartoffset\fP, -.ti +5n -.B int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP); +.B " const char *\fIsubject\fP," int \fIlength\fP, int \fIstartoffset\fP, +.B " int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP);" +.fi .P The function \fBpcre_exec()\fP is called to match a subject string against a compiled pattern, which is passed in the \fIcode\fP argument. If the @@ -1473,6 +1645,9 @@ fields (not necessarily in this order): .sp In the 16-bit version of this structure, the \fImark\fP field has type "PCRE_UCHAR16 **". +.sp +In the 32-bit version of this structure, the \fImark\fP field has type +"PCRE_UCHAR32 **". .P The \fIflags\fP field is used to specify which of the other fields are set. The flag bits are: @@ -1516,6 +1691,15 @@ block in which \fImatch_limit\fP is set, and PCRE_EXTR the \fIflags\fP field. If the limit is exceeded, \fBpcre_exec()\fP returns PCRE_ERROR_MATCHLIMIT. .P +A value for the match limit may also be supplied by an item at the start of a +pattern of the form +.sp + (*LIMIT_MATCH=d) +.sp +where d is a decimal number. However, such a setting is ignored unless d is +less than the limit set by the caller of \fBpcre_exec()\fP or, if no such limit +is set, less than the default. +.P The \fImatch_limit_recursion\fP field is similar to \fImatch_limit\fP, but instead of limiting the total number of times that \fBmatch()\fP is called, it limits the depth of recursion. The recursion depth is a smaller number than the @@ -1534,6 +1718,15 @@ with a \fBpcre_extra\fP block in which \fImatch_limit_ PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the \fIflags\fP field. If the limit is exceeded, \fBpcre_exec()\fP returns PCRE_ERROR_RECURSIONLIMIT. .P +A value for the recursion limit may also be supplied by an item at the start of +a pattern of the form +.sp + (*LIMIT_RECURSION=d) +.sp +where d is a decimal number. However, such a setting is ignored unless d is +less than the limit set by the caller of \fBpcre_exec()\fP or, if no such limit +is set, less than the default. +.P The \fIcallout_data\fP field is used in conjunction with the "callout" feature, and is described in the .\" HREF @@ -1541,20 +1734,24 @@ and is described in the .\" documentation. .P -The \fItables\fP field is used to pass a character tables pointer to -\fBpcre_exec()\fP; this overrides the value that is stored with the compiled -pattern. A non-NULL value is stored with the compiled pattern only if custom -tables were supplied to \fBpcre_compile()\fP via its \fItableptr\fP argument. -If NULL is passed to \fBpcre_exec()\fP using this mechanism, it forces PCRE's -internal tables to be used. This facility is helpful when re-using patterns -that have been saved after compiling with an external set of tables, because -the external tables might be at a different address when \fBpcre_exec()\fP is -called. See the +The \fItables\fP field is provided for use with patterns that have been +pre-compiled using custom character tables, saved to disc or elsewhere, and +then reloaded, because the tables that were used to compile a pattern are not +saved with it. See the .\" HREF \fBpcreprecompile\fP .\" -documentation for a discussion of saving compiled patterns for later use. +documentation for a discussion of saving compiled patterns for later use. If +NULL is passed using this mechanism, it forces PCRE's internal tables to be +used. .P +\fBWarning:\fP The tables that \fBpcre_exec()\fP uses must be the same as those +that were used when the pattern was compiled. If this is not the case, the +behaviour of \fBpcre_exec()\fP is undefined. Therefore, when a pattern is +compiled and matched in the same process, this field should never be set. In +this (the most common) case, the correct table pointer is automatically passed +with the compiled pattern from \fBpcre_compile()\fP to \fBpcre_exec()\fP. +.P If PCRE_EXTRA_MARK is set in the \fIflags\fP field, the \fImark\fP field must be set to point to a suitable variable. If the pattern contains any backtracking control verbs such as (*MARK:NAME), and the execution ends up with @@ -1699,18 +1896,19 @@ unanchored match must start with a specific character, for that character, and fails immediately if it cannot find it, without actually running the main matching function. This means that a special item such as (*COMMIT) at the start of a pattern is not considered until after a -suitable starting point for the match has been found. When callouts or (*MARK) -items are in use, these "start-up" optimizations can cause them to be skipped -if the pattern is never actually used. The start-up optimizations are in effect -a pre-scan of the subject that takes place before the pattern is run. +suitable starting point for the match has been found. Also, when callouts or +(*MARK) items are in use, these "start-up" optimizations can cause them to be +skipped if the pattern is never actually used. The start-up optimizations are +in effect a pre-scan of the subject that takes place before the pattern is run. .P The PCRE_NO_START_OPTIMIZE option disables the start-up optimizations, possibly causing performance to suffer, but ensuring that in cases where the result is "no match", the callouts do occur, and that items such as (*COMMIT) and (*MARK) are considered at every possible starting position in the subject string. If PCRE_NO_START_OPTIMIZE is set at compile time, it cannot be unset at matching -time. The use of PCRE_NO_START_OPTIMIZE disables JIT execution; when it is set, -matching is always done using interpretively. +time. The use of PCRE_NO_START_OPTIMIZE at matching time (that is, passing it +to \fBpcre_exec()\fP) disables JIT execution; in this situation, matching is +always done using interpretively. .P Setting PCRE_NO_START_OPTIMIZE can change the outcome of a matching operation. Consider the pattern @@ -1776,7 +1974,7 @@ all the matches in a single subject string. However, y the value of \fIstartoffset\fP points to the start of a character (or the end of the subject). When PCRE_NO_UTF8_CHECK is set, the effect of passing an invalid string as a subject or an invalid value of \fIstartoffset\fP is -undefined. Your program may crash. +undefined. Your program may crash or loop. .sp PCRE_PARTIAL_HARD PCRE_PARTIAL_SOFT @@ -1810,14 +2008,19 @@ documentation. .rs .sp The subject string is passed to \fBpcre_exec()\fP as a pointer in -\fIsubject\fP, a length in bytes in \fIlength\fP, and a starting byte offset -in \fIstartoffset\fP. If this is negative or greater than the length of the -subject, \fBpcre_exec()\fP returns PCRE_ERROR_BADOFFSET. When the starting -offset is zero, the search for a match starts at the beginning of the subject, -and this is by far the most common case. In UTF-8 mode, the byte offset must -point to the start of a UTF-8 character (or the end of the subject). Unlike the -pattern string, the subject may contain binary zero bytes. +\fIsubject\fP, a length in \fIlength\fP, and a starting offset in +\fIstartoffset\fP. The units for \fIlength\fP and \fIstartoffset\fP are bytes +for the 8-bit library, 16-bit data items for the 16-bit library, and 32-bit +data items for the 32-bit library. .P +If \fIstartoffset\fP is negative or greater than the length of the subject, +\fBpcre_exec()\fP returns PCRE_ERROR_BADOFFSET. When the starting offset is +zero, the search for a match starts at the beginning of the subject, and this +is by far the most common case. In UTF-8 or UTF-16 mode, the offset must point +to the start of a character, or the end of the subject (in UTF-32 mode, one +data unit equals one character, so all offsets are valid). Unlike the pattern +string, the subject may contain binary zeroes. +.P A non-zero starting offset is useful when searching for another match in the same subject by calling \fBpcre_exec()\fP again after a previous success. Setting \fIstartoffset\fP differs from just passing over a shortened string and @@ -1880,10 +2083,12 @@ rounded down. When a match is successful, information about captured substrings is returned in pairs of integers, starting at the beginning of \fIovector\fP, and continuing up to two-thirds of its length at the most. The first element of -each pair is set to the byte offset of the first character in a substring, and -the second is set to the byte offset of the first character after the end of a -substring. \fBNote\fP: these values are always byte offsets, even in UTF-8 -mode. They are not character counts. +each pair is set to the offset of the first character in a substring, and the +second is set to the offset of the first character after the end of a +substring. These values are always data unit offsets, even in UTF mode. They +are byte offsets in the 8-bit library, 16-bit data item offsets in the 16-bit +library, and 32-bit data item offsets in the 32-bit library. \fBNote\fP: they +are not character counts. .P The first pair of integers, \fIovector[0]\fP and \fIovector[1]\fP, identify the portion of the subject string matched by the entire pattern. The next pair is @@ -2109,7 +2314,7 @@ documentation for more details. PCRE_ERROR_BADMODE (-28) .sp This error is given if a pattern that was compiled by the 8-bit library is -passed to a 16-bit library function, or vice versa. +passed to a 16-bit or 32-bit library function, or vice versa. .sp PCRE_ERROR_BADENDIANNESS (-29) .sp @@ -2117,8 +2322,24 @@ This error is given if a pattern that was compiled and host with different endianness. The utility function \fBpcre_pattern_to_host_byte_order()\fP can be used to convert such a pattern so that it runs on the new host. +.sp + PCRE_ERROR_JIT_BADOPTION +.sp +This error is returned when a pattern that was successfully studied using a JIT +compile option is being matched, but the matching mode (partial or complete +match) does not correspond to any JIT compilation mode. When the JIT fast path +function is used, this error may be also given for invalid options. See the +.\" HREF +\fBpcrejit\fP +.\" +documentation for more details. +.sp + PCRE_ERROR_BADLENGTH (-32) +.sp +This error is given if \fBpcre_exec()\fP is called with a negative value for +the \fIlength\fP argument. .P -Error numbers -16 to -20, -22, and -30 are not used by \fBpcre_exec()\fP. +Error numbers -16 to -20, -22, and 30 are not used by \fBpcre_exec()\fP. . . .\" HTML @@ -2126,11 +2347,15 @@ Error numbers -16 to -20, -22, and -30 are not used by .rs .sp This section applies only to the 8-bit library. The corresponding information -for the 16-bit library is given in the +for the 16-bit and 32-bit libraries is given in the .\" HREF \fBpcre16\fP .\" -page. +and +.\" HREF +\fBpcre32\fP +.\" +pages. .P When \fBpcre_exec()\fP returns either PCRE_ERROR_BADUTF8 or PCRE_ERROR_SHORTUTF8, and the size of the output vector (\fIovecsize\fP) is at @@ -2200,26 +2425,30 @@ character. .sp The first byte of a character has the value 0xfe or 0xff. These values can never occur in a valid UTF-8 string. +.sp + PCRE_UTF8_ERR22 +.sp +This error code was formerly used when the presence of a so-called +"non-character" caused an error. Unicode corrigendum #9 makes it clear that +such characters should not cause a string to be rejected, and so this code is +no longer in use and is never returned. . . .SH "EXTRACTING CAPTURED SUBSTRINGS BY NUMBER" .rs .sp +.nf .B int pcre_copy_substring(const char *\fIsubject\fP, int *\fIovector\fP, -.ti +5n -.B int \fIstringcount\fP, int \fIstringnumber\fP, char *\fIbuffer\fP, -.ti +5n -.B int \fIbuffersize\fP); -.PP +.B " int \fIstringcount\fP, int \fIstringnumber\fP, char *\fIbuffer\fP," +.B " int \fIbuffersize\fP);" +.sp .B int pcre_get_substring(const char *\fIsubject\fP, int *\fIovector\fP, -.ti +5n -.B int \fIstringcount\fP, int \fIstringnumber\fP, -.ti +5n -.B const char **\fIstringptr\fP); -.PP +.B " int \fIstringcount\fP, int \fIstringnumber\fP," +.B " const char **\fIstringptr\fP);" +.sp .B int pcre_get_substring_list(const char *\fIsubject\fP, -.ti +5n -.B int *\fIovector\fP, int \fIstringcount\fP, "const char ***\fIlistptr\fP);" +.B " int *\fIovector\fP, int \fIstringcount\fP, const char ***\fIlistptr\fP);" +.fi .PP Captured substrings can be accessed directly by using the offsets returned by \fBpcre_exec()\fP in \fIovector\fP. For convenience, the functions @@ -2298,25 +2527,20 @@ provided. .SH "EXTRACTING CAPTURED SUBSTRINGS BY NAME" .rs .sp +.nf .B int pcre_get_stringnumber(const pcre *\fIcode\fP, -.ti +5n -.B const char *\fIname\fP); -.PP +.B " const char *\fIname\fP);" +.sp .B int pcre_copy_named_substring(const pcre *\fIcode\fP, -.ti +5n -.B const char *\fIsubject\fP, int *\fIovector\fP, -.ti +5n -.B int \fIstringcount\fP, const char *\fIstringname\fP, -.ti +5n -.B char *\fIbuffer\fP, int \fIbuffersize\fP); -.PP +.B " const char *\fIsubject\fP, int *\fIovector\fP," +.B " int \fIstringcount\fP, const char *\fIstringname\fP," +.B " char *\fIbuffer\fP, int \fIbuffersize\fP);" +.sp .B int pcre_get_named_substring(const pcre *\fIcode\fP, -.ti +5n -.B const char *\fIsubject\fP, int *\fIovector\fP, -.ti +5n -.B int \fIstringcount\fP, const char *\fIstringname\fP, -.ti +5n -.B const char **\fIstringptr\fP); +.B " const char *\fIsubject\fP, int *\fIovector\fP," +.B " int \fIstringcount\fP, const char *\fIstringname\fP," +.B " const char **\fIstringptr\fP);" +.fi .PP To extract a substring by name, you first have to find associated number. For example, for this pattern @@ -2368,9 +2592,10 @@ same number causes an error at compile time. .SH "DUPLICATE SUBPATTERN NAMES" .rs .sp +.nf .B int pcre_get_stringtable_entries(const pcre *\fIcode\fP, -.ti +5n -.B const char *\fIname\fP, char **\fIfirst\fP, char **\fIlast\fP); +.B " const char *\fIname\fP, char **\fIfirst\fP, char **\fIlast\fP);" +.fi .PP When a pattern is compiled with the PCRE_DUPNAMES option, names for subpatterns are not required to be unique. (Duplicate names are always allowed for @@ -2459,13 +2684,12 @@ the value returned is the size of each block that is o .SH "MATCHING A PATTERN: THE ALTERNATIVE FUNCTION" .rs .sp +.nf .B int pcre_dfa_exec(const pcre *\fIcode\fP, "const pcre_extra *\fIextra\fP," -.ti +5n -.B "const char *\fIsubject\fP," int \fIlength\fP, int \fIstartoffset\fP, -.ti +5n -.B int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP, -.ti +5n -.B int *\fIworkspace\fP, int \fIwscount\fP); +.B " const char *\fIsubject\fP, int \fIlength\fP, int \fIstartoffset\fP," +.B " int \fIoptions\fP, int *\fIovector\fP, int \fIovecsize\fP," +.B " int *\fIworkspace\fP, int \fIwscount\fP);" +.fi .P The function \fBpcre_dfa_exec()\fP is called to match a subject string against a compiled pattern, using a matching algorithm that scans the subject string @@ -2592,6 +2816,14 @@ matching string is given first. If there were too many \fIovector\fP, the yield of the function is zero, and the vector is filled with the longest matches. Unlike \fBpcre_exec()\fP, \fBpcre_dfa_exec()\fP can use the entire \fIovector\fP for returning matched strings. +.P +NOTE: PCRE's "auto-possessification" optimization usually applies to character +repeats at the end of a pattern (as well as internally). For example, the +pattern "a\ed+" is compiled as if it were "a\ed++" because there is no point +even considering the possibility of backtracking into the repeated digits. For +DFA matching, this means that only one possible match is found. If you really +do want multiple matches in such cases, either use an ungreedy repeat +("a\ed+?") or set the PCRE_NO_AUTO_POSSESS option when compiling. . . .SS "Error returns from \fBpcre_dfa_exec()\fP" @@ -2648,9 +2880,10 @@ fail, this error is given. .SH "SEE ALSO" .rs .sp -\fBpcre16\fP(3), \fBpcrebuild\fP(3), \fBpcrecallout\fP(3), \fBpcrecpp(3)\fP(3), -\fBpcrematching\fP(3), \fBpcrepartial\fP(3), \fBpcreposix\fP(3), -\fBpcreprecompile\fP(3), \fBpcresample\fP(3), \fBpcrestack\fP(3). +\fBpcre16\fP(3), \fBpcre32\fP(3), \fBpcrebuild\fP(3), \fBpcrecallout\fP(3), +\fBpcrecpp(3)\fP(3), \fBpcrematching\fP(3), \fBpcrepartial\fP(3), +\fBpcreposix\fP(3), \fBpcreprecompile\fP(3), \fBpcresample\fP(3), +\fBpcrestack\fP(3). . . .SH AUTHOR @@ -2667,6 +2900,6 @@ Cambridge CB2 3QH, England. .rs .sp .nf -Last updated: 17 June 2012 -Copyright (c) 1997-2012 University of Cambridge. +Last updated: 12 November 2013 +Copyright (c) 1997-2013 University of Cambridge. .fi