embedaddon/pcre/doc/pcrebuild.3 - diff

Return to pcrebuild.3 CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / pcre / doc

Diff for /embedaddon/pcre/doc/pcrebuild.3 between versions 1.1.1.3 and 1.1.1.4

version 1.1.1.3, 2012/10/09 09:19:17	version 1.1.1.4, 2013/07/22 08:25:56
Line 1	Line 1
.TH PCREBUILD 3 "07 January 2012" "PCRE 8.30"	.TH PCREBUILD 3 "12 May 2013" "PCRE 8.33"
.SH NAME	.SH NAME
PCRE - Perl-compatible regular expressions	PCRE - Perl-compatible regular expressions
.	.
.	.
	.SH "BUILDING PCRE"
	.rs
	.sp
	PCRE is distributed with a \fBconfigure\fP script that can be used to build the
	library in Unix-like environments using the applications known as Autotools.
	Also in the distribution are files to support building using \fBCMake\fP
	instead of \fBconfigure\fP. The text file
	.\" HTML <a href="README.txt">
	.\" </a>
	\fBREADME\fP
	.\"
	contains general information about building with Autotools (some of which is
	repeated below), and also has some comments about building on various operating
	systems. There is a lot more information about building PCRE without using
	Autotools (including information about using \fBCMake\fP and building "by
	hand") in the text file called
	.\" HTML <a href="NON-AUTOTOOLS-BUILD.txt">
	.\" </a>
	\fBNON-AUTOTOOLS-BUILD\fP.
	.\"
	You should consult this file as well as the
	.\" HTML <a href="README.txt">
	.\" </a>
	\fBREADME\fP
	.\"
	file if you are building in a non-Unix-like environment.
	.
	.
.SH "PCRE BUILD-TIME OPTIONS"	.SH "PCRE BUILD-TIME OPTIONS"
.rs	.rs
.sp	.sp
This document describes the optional features of PCRE that can be selected when	The rest of this document describes the optional features of PCRE that can be
the library is compiled. It assumes use of the \fBconfigure\fP script, where	selected when the library is compiled. It assumes use of the \fBconfigure\fP
the optional features are selected or deselected by providing options to	script, where the optional features are selected or deselected by providing
\fBconfigure\fP before running the \fBmake\fP command. However, the same	options to \fBconfigure\fP before running the \fBmake\fP command. However, the
options can be selected in both Unix-like and non-Unix-like environments using	same options can be selected in both Unix-like and non-Unix-like environments
the GUI facility of \fBcmake-gui\fP if you are using \fBCMake\fP instead of	using the GUI facility of \fBcmake-gui\fP if you are using \fBCMake\fP instead
\fBconfigure\fP to build PCRE.	of \fBconfigure\fP to build PCRE.
.P	.P
There is a lot more information about building PCRE in non-Unix-like	If you are not using Autotools or \fBCMake\fP, option selection can be done by
environments in the file called \fINON_UNIX_USE\fP, which is part of the PCRE	editing the \fBconfig.h\fP file, or by passing parameter settings to the
distribution. You should consult this file as well as the \fIREADME\fP file if	compiler, as described in
you are building in a non-Unix-like environment.	.\" HTML <a href="NON-AUTOTOOLS-BUILD.txt">
	.\" </a>
	\fBNON-AUTOTOOLS-BUILD\fP.
	.\"
.P	.P
The complete list of options for \fBconfigure\fP (which includes the standard	The complete list of options for \fBconfigure\fP (which includes the standard
ones such as the selection of the installation directory) can be obtained by	ones such as the selection of the installation directory) can be obtained by
Line 32 The following sections include descriptions of options	Line 63 The following sections include descriptions of options
exists as well, but as it specifies the default, it is not described.	exists as well, but as it specifies the default, it is not described.
.	.
.	.
.SH "BUILDING 8-BIT and 16-BIT LIBRARIES"	.SH "BUILDING 8-BIT, 16-BIT AND 32-BIT LIBRARIES"
.rs	.rs
.sp	.sp
By default, a library called \fBlibpcre\fP is built, containing functions that	By default, a library called \fBlibpcre\fP is built, containing functions that
Line 44 strings, by adding	Line 75 strings, by adding
.sp	.sp
--enable-pcre16	--enable-pcre16
.sp	.sp
	to the \fBconfigure\fP command. You can also build yet another separate
	library, called \fBlibpcre32\fP, in which strings are contained in vectors of
	32-bit data units and interpreted either as single-unit characters or UTF-32
	strings, by adding
	.sp
	--enable-pcre32
	.sp
to the \fBconfigure\fP command. If you do not want the 8-bit library, add	to the \fBconfigure\fP command. If you do not want the 8-bit library, add
.sp	.sp
--disable-pcre8	--disable-pcre8
.sp	.sp
as well. At least one of the two libraries must be built. Note that the C++ and	as well. At least one of the three libraries must be built. Note that the C++
POSIX wrappers are for the 8-bit library only, and that \fBpcregrep\fP is an	and POSIX wrappers are for the 8-bit library only, and that \fBpcregrep\fP is
8-bit program. None of these are built if you select only the 16-bit library.	an 8-bit program. None of these are built if you select only the 16-bit or
	32-bit libraries.
.	.
.	.
.SH "BUILDING SHARED AND STATIC LIBRARIES"	.SH "BUILDING SHARED AND STATIC LIBRARIES"
.rs	.rs
.sp	.sp
The PCRE building process uses \fBlibtool\fP to build both shared and static	The Autotools PCRE building process uses \fBlibtool\fP to build both shared and
Unix libraries by default. You can suppress one of these by adding one of	static libraries by default. You can suppress one of these by adding one of
.sp	.sp
--disable-shared	--disable-shared
--disable-static	--disable-static
Line 78 strings). You can disable this by adding	Line 117 strings). You can disable this by adding
to the \fBconfigure\fP command.	to the \fBconfigure\fP command.
.	.
.	.
.SH "UTF-8 and UTF-16 SUPPORT"	.SH "UTF-8, UTF-16 AND UTF-32 SUPPORT"
.rs	.rs
.sp	.sp
To build PCRE with support for UTF Unicode character strings, add	To build PCRE with support for UTF Unicode character strings, add
.sp	.sp
--enable-utf	--enable-utf
.sp	.sp
to the \fBconfigure\fP command. This setting applies to both libraries, adding	to the \fBconfigure\fP command. This setting applies to all three libraries,
support for UTF-8 to the 8-bit library and support for UTF-16 to the 16-bit	adding support for UTF-8 to the 8-bit library, support for UTF-16 to the 16-bit
library. There are no separate options for enabling UTF-8 and UTF-16	library, and support for UTF-32 to the to the 32-bit library. There are no
independently because that would allow ridiculous settings such as requesting	separate options for enabling UTF-8, UTF-16 and UTF-32 independently because
UTF-16 support while building only the 8-bit library. It is not possible to	that would allow ridiculous settings such as requesting UTF-16 support while
build one library with UTF support and the other without in the same	building only the 8-bit library. It is not possible to build one library with
configuration. (For backwards compatibility, --enable-utf8 is a synonym of	UTF support and another without in the same configuration. (For backwards
--enable-utf.)	compatibility, --enable-utf8 is a synonym of --enable-utf.)
.P	.P
Of itself, this setting does not make PCRE treat strings as UTF-8 or UTF-16. As	Of itself, this setting does not make PCRE treat strings as UTF-8, UTF-16 or
well as compiling PCRE with this option, you also have have to set the	UTF-32. As well as compiling PCRE with this option, you also have have to set
PCRE_UTF8 or PCRE_UTF16 option when you call one of the pattern compiling	the PCRE_UTF8, PCRE_UTF16 or PCRE_UTF32 option (as appropriate) when you call
functions.	one of the pattern compiling functions.
.P	.P
If you set --enable-utf when compiling in an EBCDIC environment, PCRE expects	If you set --enable-utf when compiling in an EBCDIC environment, PCRE expects
its input to be either ASCII or UTF-8 (depending on the run-time option). It is	its input to be either ASCII or UTF-8 (depending on the run-time option). It is
Line 221 to the \fBconfigure\fP command.	Line 260 to the \fBconfigure\fP command.
.sp	.sp
Within a compiled pattern, offset values are used to point from one part to	Within a compiled pattern, offset values are used to point from one part to
another (for example, from an opening parenthesis to an alternation	another (for example, from an opening parenthesis to an alternation
metacharacter). By default, two-byte values are used for these offsets, leading	metacharacter). By default, in the 8-bit and 16-bit libraries, two-byte values
to a maximum size for a compiled pattern of around 64K. This is sufficient to	are used for these offsets, leading to a maximum size for a compiled pattern of
handle all but the most gigantic patterns. Nevertheless, some people do want to	around 64K. This is sufficient to handle all but the most gigantic patterns.
process truly enormous patterns, so it is possible to compile PCRE to use	Nevertheless, some people do want to process truly enormous patterns, so it is
three-byte or four-byte offsets by adding a setting such as	possible to compile PCRE to use three-byte or four-byte offsets by adding a
	setting such as
.sp	.sp
--with-link-size=3	--with-link-size=3
.sp	.sp
to the \fBconfigure\fP command. The value given must be 2, 3, or 4. For the	to the \fBconfigure\fP command. The value given must be 2, 3, or 4. For the
16-bit library, a value of 3 is rounded up to 4. Using longer offsets slows	16-bit library, a value of 3 is rounded up to 4. In these libraries, using
down the operation of PCRE because it has to load additional data when handling	longer offsets slows down the operation of PCRE because it has to load
them.	additional data when handling them. For the 32-bit library the value is always
	4 and cannot be overridden; the value of --with-link-size is ignored.
.	.
.	.
.SH "AVOIDING EXCESSIVE STACK USAGE"	.SH "AVOIDING EXCESSIVE STACK USAGE"
Line 334 to the \fBconfigure\fP command. This setting implies	Line 375 to the \fBconfigure\fP command. This setting implies
--enable-rebuild-chartables. You should only use it if you know that you are in	--enable-rebuild-chartables. You should only use it if you know that you are in
an EBCDIC environment (for example, an IBM mainframe operating system). The	an EBCDIC environment (for example, an IBM mainframe operating system). The
--enable-ebcdic option is incompatible with --enable-utf.	--enable-ebcdic option is incompatible with --enable-utf.
	.P
	The EBCDIC character that corresponds to an ASCII LF is assumed to have the
	value 0x15 by default. However, in some EBCDIC environments, 0x25 is used. In
	such an environment you should use
	.sp
	--enable-ebcdic-nl25
	.sp
	as well as, or instead of, --enable-ebcdic. The EBCDIC character for CR has the
	same value as in ASCII, namely, 0x0d. Whichever of 0x15 and 0x25 is \fInot\fP
	chosen as LF is made to correspond to the Unicode NEL character (which, in
	Unicode, is 0x85).
	.P
	The options that select newline behaviour, such as --enable-newline-is-cr,
	and equivalent run-time options, refer to these character values in an EBCDIC
	environment.
.	.
.	.
.SH "PCREGREP OPTIONS FOR COMPRESSED FILE SUPPORT"	.SH "PCREGREP OPTIONS FOR COMPRESSED FILE SUPPORT"
Line 400 automatically included, you may need to add something	Line 456 automatically included, you may need to add something
immediately before the \fBconfigure\fP command.	immediately before the \fBconfigure\fP command.
.	.
.	.
	.SH "DEBUGGING WITH VALGRIND SUPPORT"
	.rs
	.sp
	By adding the
	.sp
	--enable-valgrind
	.sp
	option to to the \fBconfigure\fP command, PCRE will use valgrind annotations
	to mark certain memory regions as unaddressable. This allows it to detect
	invalid memory accesses, and is mostly useful for debugging PCRE itself.
	.
	.
	.SH "CODE COVERAGE REPORTING"
	.rs
	.sp
	If your C compiler is gcc, you can build a version of PCRE that can generate a
	code coverage report for its test suite. To enable this, you must install
	\fBlcov\fP version 1.6 or above. Then specify
	.sp
	--enable-coverage
	.sp
	to the \fBconfigure\fP command and build PCRE in the usual way.
	.P
	Note that using \fBccache\fP (a caching C compiler) is incompatible with code
	coverage reporting. If you have configured \fBccache\fP to run automatically
	on your system, you must set the environment variable
	.sp
	CCACHE_DISABLE=1
	.sp
	before running \fBmake\fP to build PCRE, so that \fBccache\fP is not used.
	.P
	When --enable-coverage is used, the following addition targets are added to the
	\fIMakefile\fP:
	.sp
	make coverage
	.sp
	This creates a fresh coverage report for the PCRE test suite. It is equivalent
	to running "make coverage-reset", "make coverage-baseline", "make check", and
	then "make coverage-report".
	.sp
	make coverage-reset
	.sp
	This zeroes the coverage counters, but does nothing else.
	.sp
	make coverage-baseline
	.sp
	This captures baseline coverage information.
	.sp
	make coverage-report
	.sp
	This creates the coverage report.
	.sp
	make coverage-clean-report
	.sp
	This removes the generated coverage report without cleaning the coverage data
	itself.
	.sp
	make coverage-clean-data
	.sp
	This removes the captured coverage data without removing the coverage files
	created at compile time (*.gcno).
	.sp
	make coverage-clean
	.sp
	This cleans all coverage data including the generated coverage report. For more
	information about code coverage, see the \fBgcov\fP and \fBlcov\fP
	documentation.
	.
	.
.SH "SEE ALSO"	.SH "SEE ALSO"
.rs	.rs
.sp	.sp
\fBpcreapi\fP(3), \fBpcre16\fP, \fBpcre_config\fP(3).	\fBpcreapi\fP(3), \fBpcre16\fP, \fBpcre32\fP, \fBpcre_config\fP(3).
.	.
.	.
.SH AUTHOR	.SH AUTHOR
Line 420 Cambridge CB2 3QH, England.	Line 545 Cambridge CB2 3QH, England.
.rs	.rs
.sp	.sp
.nf	.nf
Last updated: 07 January 2012	Last updated: 12 May 2013
Copyright (c) 1997-2012 University of Cambridge.	Copyright (c) 1997-2013 University of Cambridge.
.fi	.fi

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.1.1.3
changed lines
	Added in v.1.1.1.4