Diff for /embedaddon/pcre/doc/pcretest.1 between versions 1.1.1.2 and 1.1.1.5

version 1.1.1.2, 2012/02/21 23:50:25 version 1.1.1.5, 2014/06/15 19:46:05
Line 1 Line 1
.TH PCRETEST 1.TH PCRETEST 1 "12 November 2013" "PCRE 8.34"
 .SH NAME  .SH NAME
 pcretest - a program for testing Perl-compatible regular expressions.  pcretest - a program for testing Perl-compatible regular expressions.
 .SH SYNOPSIS  .SH SYNOPSIS
Line 18  options, see the Line 18  options, see the
 .\" HREF  .\" HREF
 \fBpcreapi\fP  \fBpcreapi\fP
 .\"  .\"
and,
 .\" HREF  .\" HREF
 \fBpcre16\fP  \fBpcre16\fP
   and
   .\" HREF
   \fBpcre32\fP
 .\"  .\"
documentation. The input for \fBpcretest\fP is a sequence of regular expressiondocumentation.
patterns and strings to be matched, as described below. The output shows the.P
result of each match. Options on the command line and the patterns control PCREThe input for \fBpcretest\fP is a sequence of regular expression patterns and
options and exactly what is output.strings to be matched, as described below. The output shows the result of each
 match. Options on the command line and the patterns control PCRE options and
 exactly what is output.
 .P
 As PCRE has evolved, it has acquired many different features, and as a result,
 \fBpcretest\fP now has rather a lot of obscure options for testing every
 possible feature. Some of these options are specifically designed for use in
 conjunction with the test script and data files that are distributed as part of
 PCRE, and are unlikely to be of use otherwise. They are all documented here,
 but without much justification.
 .  .
 .  .
.SH "PCRE's 8-BIT and 16-BIT LIBRARIES".SH "INPUT DATA FORMAT"
 .rs  .rs
 .sp  .sp
   Input to \fBpcretest\fP is processed line by line, either by calling the C
   library's \fBfgets()\fP function, or via the \fBlibreadline\fP library (see
   below). In Unix-like environments, \fBfgets()\fP treats any bytes other than
   newline as data characters. However, in some Windows environments character 26
   (hex 1A) causes an immediate end of file, and no further data is read. For
   maximum portability, therefore, it is safest to use only ASCII characters in
   \fBpcretest\fP input files.
   .
   .
   .SH "PCRE's 8-BIT, 16-BIT AND 32-BIT LIBRARIES"
   .rs
   .sp
 From release 8.30, two separate PCRE libraries can be built. The original one  From release 8.30, two separate PCRE libraries can be built. The original one
 supports 8-bit character strings, whereas the newer 16-bit library supports  supports 8-bit character strings, whereas the newer 16-bit library supports
character strings encoded in 16-bit units. The \fBpcretest\fP program can becharacter strings encoded in 16-bit units. From release 8.32, a third library
used to test both libraries. However, it is itself still an 8-bit program,can be built, supporting character strings encoded in 32-bit units. The
reading 8-bit input and writing 8-bit output. When testing the 16-bit library,\fBpcretest\fP program can be used to test all three libraries. However, it is
the patterns and data strings are converted to 16-bit format before beingitself still an 8-bit program, reading 8-bit input and writing 8-bit output.
passed to the PCRE library functions. Results are converted to 8-bit forWhen testing the 16-bit or 32-bit library, the patterns and data strings are
output.converted to 16- or 32-bit format before being passed to the PCRE library
 functions. Results are converted to 8-bit for output.
 .P  .P
References to functions and structures of the form \fBpcre[16]_xx\fP belowReferences to functions and structures of the form \fBpcre[16|32]_xx\fP below
mean "\fBpcre_xx\fP when using the 8-bit library or \fBpcre16_xx\fP when usingmean "\fBpcre_xx\fP when using the 8-bit library, \fBpcre16_xx\fP when using
the 16-bit library".the 16-bit library, or \fBpcre32_xx\fP when using the 32-bit library".
 .  .
 .  .
 .SH "COMMAND LINE OPTIONS"  .SH "COMMAND LINE OPTIONS"
 .rs  .rs
 .TP 10  .TP 10
\fB-16\fP\fB-8\fP
If both the 8-bit and the 16-bit libraries have been built, this option causesIf both the 8-bit library has been built, this option causes the 8-bit library
the 16-bit library to be used. If only the 16-bit library has been built, thisto be used (which is the default); if the 8-bit library has not been built,
is the default (so has no effect). If only the 8-bit library has been built, 
 this option causes an error.  this option causes an error.
 .TP 10  .TP 10
   \fB-16\fP
   If both the 8-bit or the 32-bit, and the 16-bit libraries have been built, this
   option causes the 16-bit library to be used. If only the 16-bit library has been
   built, this is the default (so has no effect). If only the 8-bit or the 32-bit
   library has been built, this option causes an error.
   .TP 10
   \fB-32\fP
   If both the 8-bit or the 16-bit, and the 32-bit libraries have been built, this
   option causes the 32-bit library to be used. If only the 32-bit library has been
   built, this is the default (so has no effect). If only the 8-bit or the 16-bit
   library has been built, this option causes an error.
   .TP 10
 \fB-b\fP  \fB-b\fP
 Behave as if each pattern has the \fB/B\fP (show byte code) modifier; the  Behave as if each pattern has the \fB/B\fP (show byte code) modifier; the
 internal form is output after compilation.  internal form is output after compilation.
 .TP 10  .TP 10
 \fB-C\fP  \fB-C\fP
 Output the version number of the PCRE library, and all available information  Output the version number of the PCRE library, and all available information
about the optional features that are included, and then exit. All other optionsabout the optional features that are included, and then exit with zero exit
are ignored.code. All other options are ignored.
 .TP 10  .TP 10
 \fB-C\fP \fIoption\fP  \fB-C\fP \fIoption\fP
 Output information about a specific build-time option, then exit. This  Output information about a specific build-time option, then exit. This
 functionality is intended for use in scripts such as \fBRunTest\fP. The  functionality is intended for use in scripts such as \fBRunTest\fP. The
following options output the value indicated:following options output the value and set the exit code as indicated:
 .sp  .sp
  linksize   the internal link size (2, 3, or 4)  ebcdic-nl  the code for LF (= NL) in an EBCDIC environment:
                0x15 or 0x25
                0 if used in an ASCII environment
                exit code is always 0
   linksize   the configured internal link size (2, 3, or 4)
                exit code is set to the link size
   newline    the default newline setting:    newline    the default newline setting:
                CR, LF, CRLF, ANYCRLF, or ANY                 CR, LF, CRLF, ANYCRLF, or ANY
                  exit code is always 0
 .sp  .sp
The following options output 1 for true or zero for false:The following options output 1 for true or 0 for false, and set the exit code
 to the same value:
 .sp  .sp
     ebcdic     compiled for an EBCDIC environment
   jit        just-in-time support is available    jit        just-in-time support is available
   pcre16     the 16-bit library was built    pcre16     the 16-bit library was built
     pcre32     the 32-bit library was built
   pcre8      the 8-bit library was built    pcre8      the 8-bit library was built
   ucp        Unicode property support is available    ucp        Unicode property support is available
  utf        UTF-8 and/or UTF-16 support is available  utf        UTF-8 and/or UTF-16 and/or UTF-32 support
                is available
 .sp
 If an unknown option is given, an error message is output; the exit code is 0.
 .TP 10  .TP 10
 \fB-d\fP  \fB-d\fP
 Behave as if each pattern has the \fB/D\fP (debug) modifier; the internal  Behave as if each pattern has the \fB/D\fP (debug) modifier; the internal
Line 87  form and information about the compiled pattern is out Line 135  form and information about the compiled pattern is out
 .TP 10  .TP 10
 \fB-dfa\fP  \fB-dfa\fP
 Behave as if each data line contains the \eD escape sequence; this causes the  Behave as if each data line contains the \eD escape sequence; this causes the
alternative matching function, \fBpcre[16]_dfa_exec()\fP, to be used instead ofalternative matching function, \fBpcre[16|32]_dfa_exec()\fP, to be used instead
the standard \fBpcre[16]_exec()\fP function (more detail is given below).of the standard \fBpcre[16|32]_exec()\fP function (more detail is given below).
 .TP 10  .TP 10
 \fB-help\fP  \fB-help\fP
 Output a brief summary these options and then exit.  Output a brief summary these options and then exit.
Line 100  compiled pattern is given after compilation. Line 148  compiled pattern is given after compilation.
 \fB-M\fP  \fB-M\fP
 Behave as if each data line contains the \eM escape sequence; this causes  Behave as if each data line contains the \eM escape sequence; this causes
 PCRE to discover the minimum MATCH_LIMIT and MATCH_LIMIT_RECURSION settings by  PCRE to discover the minimum MATCH_LIMIT and MATCH_LIMIT_RECURSION settings by
calling \fBpcre[16]_exec()\fP repeatedly with different limits.calling \fBpcre[16|32]_exec()\fP repeatedly with different limits.
 .TP 10  .TP 10
 \fB-m\fP  \fB-m\fP
 Output the size of each compiled pattern after it has been compiled. This is  Output the size of each compiled pattern after it has been compiled. This is
 equivalent to adding \fB/M\fP to each regular expression. The size is given in  equivalent to adding \fB/M\fP to each regular expression. The size is given in
 bytes for both libraries.  bytes for both libraries.
 .TP 10  .TP 10
   \fB-O\fP
   Behave as if each pattern has the \fB/O\fP modifier, that is disable
   auto-possessification for all patterns.
   .TP 10
 \fB-o\fP \fIosize\fP  \fB-o\fP \fIosize\fP
 Set the number of elements in the output vector that is used when calling  Set the number of elements in the output vector that is used when calling
\fBpcre[16]_exec()\fP or \fBpcre[16]_dfa_exec()\fP to be \fIosize\fP. The\fBpcre[16|32]_exec()\fP or \fBpcre[16|32]_dfa_exec()\fP to be \fIosize\fP. The
 default value is 45, which is enough for 14 capturing subexpressions for  default value is 45, which is enough for 14 capturing subexpressions for
\fBpcre[16]_exec()\fP or 22 different matches for \fBpcre[16]_dfa_exec()\fP.\fBpcre[16|32]_exec()\fP or 22 different matches for
 \fBpcre[16|32]_dfa_exec()\fP.
 The vector size can be changed for individual matching calls by including \eO  The vector size can be changed for individual matching calls by including \eO
 in the data line (see below).  in the data line (see below).
 .TP 10  .TP 10
Line 129  megabytes. Line 182  megabytes.
 .TP 10  .TP 10
 \fB-s\fP or \fB-s+\fP  \fB-s\fP or \fB-s+\fP
 Behave as if each pattern has the \fB/S\fP modifier; in other words, force each  Behave as if each pattern has the \fB/S\fP modifier; in other words, force each
pattern to be studied. If \fB-s+\fP is used, the PCRE_STUDY_JIT_COMPILE flag ispattern to be studied. If \fB-s+\fP is used, all the JIT compile options are
passed to \fBpcre[16]_study()\fP, causing just-in-time optimization to be setpassed to \fBpcre[16|32]_study()\fP, causing just-in-time optimization to be set
up if it is available. If the \fB/I\fP or \fB/D\fP option is present on aup if it is available, for both full and partial matching. Specific JIT compile
pattern (requesting output about the compiled pattern), information about theoptions can be selected by following \fB-s+\fP with a digit in the range 1 to
result of studying is not included when studying is caused only by \fB-s\fP and7, which selects the JIT compile modes as follows:
neither \fB-i\fP nor \fB-d\fP is present on the command line. This behaviour 
means that the output from tests that are run with and without \fB-s\fP should 
be identical, except when options that output information about the actual 
running of a match are set. 
 .sp  .sp
     1  normal match only
     2  soft partial match only
     3  normal match and soft partial match
     4  hard partial match only
     6  soft and hard partial match
     7  all three modes (default)
   .sp
   If \fB-s++\fP is used instead of \fB-s+\fP (with or without a following digit),
   the text "(JIT)" is added to the first output line after a match or no match
   when JIT-compiled code was actually used.
   .sp
   Note that there are pattern options that can override \fB-s\fP, either
   specifying no studying at all, or suppressing JIT compilation.
   .sp
   If the \fB/I\fP or \fB/D\fP option is present on a pattern (requesting output
   about the compiled pattern), information about the result of studying is not
   included when studying is caused only by \fB-s\fP and neither \fB-i\fP nor
   \fB-d\fP is present on the command line. This behaviour means that the output
   from tests that are run with and without \fB-s\fP should be identical, except
   when options that output information about the actual running of a match are
   set.
   .sp
 The \fB-M\fP, \fB-t\fP, and \fB-tm\fP options, which give information about  The \fB-M\fP, \fB-t\fP, and \fB-tm\fP options, which give information about
 resources used, are likely to produce different output with and without  resources used, are likely to produce different output with and without
 \fB-s\fP. Output may also differ if the \fB/C\fP option is present on an  \fB-s\fP. Output may also differ if the \fB/C\fP option is present on an
Line 149  contains (*MARK) items there may also be differences,  Line 220  contains (*MARK) items there may also be differences, 
 should never be studied (see the \fB/S\fP pattern modifier below).  should never be studied (see the \fB/S\fP pattern modifier below).
 .TP 10  .TP 10
 \fB-t\fP  \fB-t\fP
Run each compile, study, and match many times with a timer, and outputRun each compile, study, and match many times with a timer, and output the
resulting time per compile or match (in milliseconds). Do not set \fB-m\fP withresulting times per compile, study, or match (in milliseconds). Do not set
\fB-t\fP, because you will then get the size output a zillion times, and the\fB-m\fP with \fB-t\fP, because you will then get the size output a zillion
timing will be distorted. You can control the number of iterations that aretimes, and the timing will be distorted. You can control the number of
used for timing by following \fB-t\fP with a number (as a separate item on theiterations that are used for timing by following \fB-t\fP with a number (as a
command line). For example, "-t 1000" would iterate 1000 times. The default isseparate item on the command line). For example, "-t 1000" iterates 1000 times.
to iterate 500000 times.The default is to iterate 500000 times.
 .TP 10  .TP 10
 \fB-tm\fP  \fB-tm\fP
 This is like \fB-t\fP except that it times only the matching phase, not the  This is like \fB-t\fP except that it times only the matching phase, not the
 compile or study phases.  compile or study phases.
   .TP 10
   \fB-T\fP \fB-TM\fP
   These behave like \fB-t\fP and \fB-tm\fP, but in addition, at the end of a run,
   the total times for all compiles, studies, and matches are output.
 .  .
 .  .
 .SH DESCRIPTION  .SH DESCRIPTION
Line 179  option states whether or not \fBreadline()\fP will be  Line 254  option states whether or not \fBreadline()\fP will be 
 .P  .P
 The program handles any number of sets of input on a single input file. Each  The program handles any number of sets of input on a single input file. Each
 set starts with a regular expression, and continues with any number of data  set starts with a regular expression, and continues with any number of data
lines to be matched against the pattern.lines to be matched against that pattern.
 .P  .P
 Each data line is matched separately and independently. If you want to do  Each data line is matched separately and independently. If you want to do
 multi-line matches, you have to use the \en escape sequence (or \er or \er\en,  multi-line matches, you have to use the \en escape sequence (or \er or \er\en,
Line 221  pcretest to read the next line as a continuation of th Line 296  pcretest to read the next line as a continuation of th
 .rs  .rs
 .sp  .sp
 A pattern may be followed by any number of modifiers, which are mostly single  A pattern may be followed by any number of modifiers, which are mostly single
characters. Following Perl usage, these are referred to below as, for example,characters, though some of these can be qualified by further characters.
"the \fB/i\fP modifier", even though the delimiter of the pattern need notFollowing Perl usage, these are referred to below as, for example, "the
always be a slash, and no slash is used when writing modifiers. White space may\fB/i\fP modifier", even though the delimiter of the pattern need not always be
appear between the final pattern delimiter and the first modifier, and betweena slash, and no slash is used when writing modifiers. White space may appear
the modifiers themselves.between the final pattern delimiter and the first modifier, and between the
.Pmodifiers themselves. For reference, here is a complete list of modifiers. They
 fall into several groups that are described in detail in the following
 sections.
 .sp
   \fB/8\fP              set UTF mode
   \fB/9\fP              set PCRE_NEVER_UTF (locks out UTF mode)
   \fB/?\fP              disable UTF validity check
   \fB/+\fP              show remainder of subject after match
   \fB/=\fP              show all captures (not just those that are set)
 .sp
   \fB/A\fP              set PCRE_ANCHORED
   \fB/B\fP              show compiled code
   \fB/C\fP              set PCRE_AUTO_CALLOUT
   \fB/D\fP              same as \fB/B\fP plus \fB/I\fP
   \fB/E\fP              set PCRE_DOLLAR_ENDONLY
   \fB/F\fP              flip byte order in compiled pattern
   \fB/f\fP              set PCRE_FIRSTLINE
   \fB/G\fP              find all matches (shorten string)
   \fB/g\fP              find all matches (use startoffset)
   \fB/I\fP              show information about pattern
   \fB/i\fP              set PCRE_CASELESS
   \fB/J\fP              set PCRE_DUPNAMES
   \fB/K\fP              show backtracking control names
   \fB/L\fP              set locale
   \fB/M\fP              show compiled memory size
   \fB/m\fP              set PCRE_MULTILINE
   \fB/N\fP              set PCRE_NO_AUTO_CAPTURE
   \fB/O\fP              set PCRE_NO_AUTO_POSSESS
   \fB/P\fP              use the POSIX wrapper
   \fB/S\fP              study the pattern after compilation
   \fB/s\fP              set PCRE_DOTALL
   \fB/T\fP              select character tables
   \fB/U\fP              set PCRE_UNGREEDY
   \fB/W\fP              set PCRE_UCP
   \fB/X\fP              set PCRE_EXTRA
   \fB/x\fP              set PCRE_EXTENDED
   \fB/Y\fP              set PCRE_NO_START_OPTIMIZE
   \fB/Z\fP              don't show lengths in \fB/B\fP output
 .sp
   \fB/<any>\fP          set PCRE_NEWLINE_ANY
   \fB/<anycrlf>\fP      set PCRE_NEWLINE_ANYCRLF
   \fB/<cr>\fP           set PCRE_NEWLINE_CR
   \fB/<crlf>\fP         set PCRE_NEWLINE_CRLF
   \fB/<lf>\fP           set PCRE_NEWLINE_LF
   \fB/<bsr_anycrlf>\fP  set PCRE_BSR_ANYCRLF
   \fB/<bsr_unicode>\fP  set PCRE_BSR_UNICODE
   \fB/<JS>\fP           set PCRE_JAVASCRIPT_COMPAT
 .sp
 .
 .
 .SS "Perl-compatible modifiers"
 .rs
 .sp
 The \fB/i\fP, \fB/m\fP, \fB/s\fP, and \fB/x\fP modifiers set the PCRE_CASELESS,  The \fB/i\fP, \fB/m\fP, \fB/s\fP, and \fB/x\fP modifiers set the PCRE_CASELESS,
 PCRE_MULTILINE, PCRE_DOTALL, or PCRE_EXTENDED options, respectively, when  PCRE_MULTILINE, PCRE_DOTALL, or PCRE_EXTENDED options, respectively, when
\fBpcre[16]_compile()\fP is called. These four modifier letters have the same\fBpcre[16|32]_compile()\fP is called. These four modifier letters have the same
 effect as they do in Perl. For example:  effect as they do in Perl. For example:
 .sp  .sp
   /caseless/i    /caseless/i
 .sp  .sp
   .
   .
   .SS "Modifiers for other PCRE options"
   .rs
   .sp
 The following table shows additional modifiers for setting PCRE compile-time  The following table shows additional modifiers for setting PCRE compile-time
 options that do not correspond to anything in Perl:  options that do not correspond to anything in Perl:
 .sp  .sp
Line 243  options that do not correspond to anything in Perl: Line 375  options that do not correspond to anything in Perl:
   \fB/8\fP              PCRE_UTF16          ) when using the 16-bit    \fB/8\fP              PCRE_UTF16          ) when using the 16-bit
   \fB/?\fP              PCRE_NO_UTF16_CHECK )   library    \fB/?\fP              PCRE_NO_UTF16_CHECK )   library
 .sp  .sp
     \fB/8\fP              PCRE_UTF32          ) when using the 32-bit
     \fB/?\fP              PCRE_NO_UTF32_CHECK )   library
   .sp
     \fB/9\fP              PCRE_NEVER_UTF
   \fB/A\fP              PCRE_ANCHORED    \fB/A\fP              PCRE_ANCHORED
   \fB/C\fP              PCRE_AUTO_CALLOUT    \fB/C\fP              PCRE_AUTO_CALLOUT
   \fB/E\fP              PCRE_DOLLAR_ENDONLY    \fB/E\fP              PCRE_DOLLAR_ENDONLY
   \fB/f\fP              PCRE_FIRSTLINE    \fB/f\fP              PCRE_FIRSTLINE
   \fB/J\fP              PCRE_DUPNAMES    \fB/J\fP              PCRE_DUPNAMES
   \fB/N\fP              PCRE_NO_AUTO_CAPTURE    \fB/N\fP              PCRE_NO_AUTO_CAPTURE
     \fB/O\fP              PCRE_NO_AUTO_POSSESS
   \fB/U\fP              PCRE_UNGREEDY    \fB/U\fP              PCRE_UNGREEDY
   \fB/W\fP              PCRE_UCP    \fB/W\fP              PCRE_UCP
   \fB/X\fP              PCRE_EXTRA    \fB/X\fP              PCRE_EXTRA
   \fB/Y\fP              PCRE_NO_START_OPTIMIZE    \fB/Y\fP              PCRE_NO_START_OPTIMIZE
  \fB/<JS>\fP           PCRE_JAVASCRIPT_COMPAT  \fB/<any>\fP          PCRE_NEWLINE_ANY
   \fB/<anycrlf>\fP      PCRE_NEWLINE_ANYCRLF
   \fB/<cr>\fP           PCRE_NEWLINE_CR    \fB/<cr>\fP           PCRE_NEWLINE_CR
   \fB/<lf>\fP           PCRE_NEWLINE_LF  
   \fB/<crlf>\fP         PCRE_NEWLINE_CRLF    \fB/<crlf>\fP         PCRE_NEWLINE_CRLF
  \fB/<anycrlf>\fP      PCRE_NEWLINE_ANYCRLF  \fB/<lf>\fP           PCRE_NEWLINE_LF
  \fB/<any>\fP          PCRE_NEWLINE_ANY 
   \fB/<bsr_anycrlf>\fP  PCRE_BSR_ANYCRLF    \fB/<bsr_anycrlf>\fP  PCRE_BSR_ANYCRLF
   \fB/<bsr_unicode>\fP  PCRE_BSR_UNICODE    \fB/<bsr_unicode>\fP  PCRE_BSR_UNICODE
     \fB/<JS>\fP           PCRE_JAVASCRIPT_COMPAT
 .sp  .sp
 The modifiers that are enclosed in angle brackets are literal strings as shown,  The modifiers that are enclosed in angle brackets are literal strings as shown,
 including the angle brackets, but the letters within can be in either case.  including the angle brackets, but the letters within can be in either case.
Line 268  This example sets multiline matching with CRLF as the  Line 405  This example sets multiline matching with CRLF as the 
 .sp  .sp
   /^abc/m<CRLF>    /^abc/m<CRLF>
 .sp  .sp
As well as turning on the PCRE_UTF8/16 option, the \fB/8\fP modifier causesAs well as turning on the PCRE_UTF8/16/32 option, the \fB/8\fP modifier causes
 all non-printing characters in output strings to be printed using the  all non-printing characters in output strings to be printed using the
 \ex{hh...} notation. Otherwise, those less than 0x100 are output in hex without  \ex{hh...} notation. Otherwise, those less than 0x100 are output in hex without
 the curly brackets.  the curly brackets.
Line 287  Searching for all possible matches within each subject Line 424  Searching for all possible matches within each subject
 by the \fB/g\fP or \fB/G\fP modifier. After finding a match, PCRE is called  by the \fB/g\fP or \fB/G\fP modifier. After finding a match, PCRE is called
 again to search the remainder of the subject string. The difference between  again to search the remainder of the subject string. The difference between
 \fB/g\fP and \fB/G\fP is that the former uses the \fIstartoffset\fP argument to  \fB/g\fP and \fB/G\fP is that the former uses the \fIstartoffset\fP argument to
\fBpcre[16]_exec()\fP to start searching at a new point within the entire\fBpcre[16|32]_exec()\fP to start searching at a new point within the entire
 string (which is in effect what Perl does), whereas the latter passes over a  string (which is in effect what Perl does), whereas the latter passes over a
 shortened substring. This makes a difference to the matching process if the  shortened substring. This makes a difference to the matching process if the
 pattern begins with a lookbehind assertion (including \eb or \eB).  pattern begins with a lookbehind assertion (including \eb or \eB).
 .P  .P
If any call to \fBpcre[16]_exec()\fP in a \fB/g\fP or \fB/G\fP sequence matchesIf any call to \fBpcre[16|32]_exec()\fP in a \fB/g\fP or \fB/G\fP sequence matches
 an empty string, the next call is done with the PCRE_NOTEMPTY_ATSTART and  an empty string, the next call is done with the PCRE_NOTEMPTY_ATSTART and
 PCRE_ANCHORED flags set in order to search for another, non-empty, match at the  PCRE_ANCHORED flags set in order to search for another, non-empty, match at the
 same point. If this second match fails, the start offset is advanced, and the  same point. If this second match fails, the start offset is advanced, and the
Line 316  contains multiple copies of the same substring. If the Line 453  contains multiple copies of the same substring. If the
 twice, the same action is taken for captured substrings. In each case the  twice, the same action is taken for captured substrings. In each case the
 remainder is output on the following line with a plus character following the  remainder is output on the following line with a plus character following the
 capture number. Note that this modifier must not immediately follow the /S  capture number. Note that this modifier must not immediately follow the /S
modifier because /S+ has another meaning.modifier because /S+ and /S++ have other meanings.
 .P  .P
 The \fB/=\fP modifier requests that the values of all potential captured  The \fB/=\fP modifier requests that the values of all potential captured
 parentheses be output after a match. By default, only those up to the highest  parentheses be output after a match. By default, only those up to the highest
 one actually used in the match are output (corresponding to the return code  one actually used in the match are output (corresponding to the return code
from \fBpcre[16]_exec()\fP). Values in the offsets vector corresponding tofrom \fBpcre[16|32]_exec()\fP). Values in the offsets vector corresponding to
 higher numbers should be set to -1, and these are output as "<unset>". This  higher numbers should be set to -1, and these are output as "<unset>". This
 modifier gives a way of checking that this is happening.  modifier gives a way of checking that this is happening.
 .P  .P
Line 345  below. Line 482  below.
 .P  .P
 The \fB/I\fP modifier requests that \fBpcretest\fP output information about the  The \fB/I\fP modifier requests that \fBpcretest\fP output information about the
 compiled pattern (whether it is anchored, has a fixed first character, and  compiled pattern (whether it is anchored, has a fixed first character, and
so on). It does this by calling \fBpcre[16]_fullinfo()\fP after compiling aso on). It does this by calling \fBpcre[16|32]_fullinfo()\fP after compiling a
 pattern. If the pattern is studied, the results of that are also output.  pattern. If the pattern is studied, the results of that are also output.
 .P  .P
 The \fB/K\fP modifier requests \fBpcretest\fP to show names from backtracking  The \fB/K\fP modifier requests \fBpcretest\fP to show names from backtracking
control verbs that are returned from calls to \fBpcre[16]_exec()\fP. It causescontrol verbs that are returned from calls to \fBpcre[16|32]_exec()\fP. It causes
\fBpcretest\fP to create a \fBpcre[16]_extra\fP block if one has not already\fBpcretest\fP to create a \fBpcre[16|32]_extra\fP block if one has not already
been created by a call to \fBpcre[16]_study()\fP, and to set thebeen created by a call to \fBpcre[16|32]_study()\fP, and to set the
 PCRE_EXTRA_MARK flag and the \fBmark\fP field within it, every time that  PCRE_EXTRA_MARK flag and the \fBmark\fP field within it, every time that
\fBpcre[16]_exec()\fP is called. If the variable that the \fBmark\fP field\fBpcre[16|32]_exec()\fP is called. If the variable that the \fBmark\fP field
 points to is non-NULL for a match, non-match, or partial match, \fBpcretest\fP  points to is non-NULL for a match, non-match, or partial match, \fBpcretest\fP
 prints the string to which it points. For a match, this is shown on a line by  prints the string to which it points. For a match, this is shown on a line by
 itself, tagged with "MK:". For a non-match it is added to the message.  itself, tagged with "MK:". For a non-match it is added to the message.
Line 364  example, Line 501  example,
   /pattern/Lfr_FR    /pattern/Lfr_FR
 .sp  .sp
 For this reason, it must be the last modifier. The given locale is set,  For this reason, it must be the last modifier. The given locale is set,
\fBpcre[16]_maketables()\fP is called to build a set of character tables for\fBpcre[16|32]_maketables()\fP is called to build a set of character tables for
the locale, and this is then passed to \fBpcre[16]_compile()\fP when compilingthe locale, and this is then passed to \fBpcre[16|32]_compile()\fP when compiling
 the regular expression. Without an \fB/L\fP (or \fB/T\fP) modifier, NULL is  the regular expression. Without an \fB/L\fP (or \fB/T\fP) modifier, NULL is
 passed as the tables pointer; that is, \fB/L\fP applies only to the expression  passed as the tables pointer; that is, \fB/L\fP applies only to the expression
 on which it appears.  on which it appears.
 .P  .P
 The \fB/M\fP modifier causes the size in bytes of the memory block used to hold  The \fB/M\fP modifier causes the size in bytes of the memory block used to hold
 the compiled pattern to be output. This does not include the size of the  the compiled pattern to be output. This does not include the size of the
\fBpcre[16]\fP block; it is just the actual compiled data. If the pattern is\fBpcre[16|32]\fP block; it is just the actual compiled data. If the pattern is
 successfully studied with the PCRE_STUDY_JIT_COMPILE option, the size of the  successfully studied with the PCRE_STUDY_JIT_COMPILE option, the size of the
 JIT compiled code is also output.  JIT compiled code is also output.
 .P  .P
If the \fB/S\fP modifier appears once, it causes \fBpcre[16]_study()\fP to beThe \fB/S\fP modifier causes \fBpcre[16|32]_study()\fP to be called after the
called after the expression has been compiled, and the results used when theexpression has been compiled, and the results used when the expression is
expression is matched. If \fB/S\fP appears twice, it suppresses studying, evenmatched. There are a number of qualifying characters that may follow \fB/S\fP.
 They may appear in any order.
 .P
 If \fB/S\fP is followed by an exclamation mark, \fBpcre[16|32]_study()\fP is
 called with the PCRE_STUDY_EXTRA_NEEDED option, causing it always to return a
 \fBpcre_extra\fP block, even when studying discovers no useful information.
 .P
 If \fB/S\fP is followed by a second S character, it suppresses studying, even
 if it was requested externally by the \fB-s\fP command line option. This makes  if it was requested externally by the \fB-s\fP command line option. This makes
 it possible to specify that certain patterns are always studied, and others are  it possible to specify that certain patterns are always studied, and others are
 never studied, independently of \fB-s\fP. This feature is used in the test  never studied, independently of \fB-s\fP. This feature is used in the test
 files in a few cases where the output is different when the pattern is studied.  files in a few cases where the output is different when the pattern is studied.
 .P  .P
If the \fB/S\fP modifier is immediately followed by a + character, the call toIf the \fB/S\fP modifier is followed by a + character, the call to
\fBpcre[16]_study()\fP is made with the PCRE_STUDY_JIT_COMPILE option,\fBpcre[16|32]_study()\fP is made with all the JIT study options, requesting
requesting just-in-time optimization support if it is available. Note thatjust-in-time optimization support if it is available, for both normal and
there is also a \fB/+\fP modifier; it must not be given immediately afterpartial matching. If you want to restrict the JIT compiling modes, you can
\fB/S\fP because this will be misinterpreted. If JIT studying is successful, itfollow \fB/S+\fP with a digit in the range 1 to 7:
will automatically be used when \fBpcre[16]_exec()\fP is run, except when.sp
incompatible run-time options are specified. These include the partial matching  1  normal match only
options; a complete list is given in the  2  soft partial match only
   3  normal match and soft partial match
   4  hard partial match only
   6  soft and hard partial match
   7  all three modes (default)
 .sp
 If \fB/S++\fP is used instead of \fB/S+\fP (with or without a following digit),
 the text "(JIT)" is added to the first output line after a match or no match
 when JIT-compiled code was actually used.
 .P
 Note that there is also an independent \fB/+\fP modifier; it must not be given
 immediately after \fB/S\fP or \fB/S+\fP because this will be misinterpreted.
 .P
 If JIT studying is successful, the compiled JIT code will automatically be used
 when \fBpcre[16|32]_exec()\fP is run, except when incompatible run-time options
 are specified. For more details, see the
 .\" HREF  .\" HREF
 \fBpcrejit\fP  \fBpcrejit\fP
 .\"  .\"
 documentation. See also the \fB\eJ\fP escape sequence below for a way of  documentation. See also the \fB\eJ\fP escape sequence below for a way of
 setting the size of the JIT stack.  setting the size of the JIT stack.
 .P  .P
   Finally, if \fB/S\fP is followed by a minus character, JIT compilation is
   suppressed, even if it was requested externally by the \fB-s\fP command line
   option. This makes it possible to specify that JIT is never to be used for
   certain patterns.
   .P
 The \fB/T\fP modifier must be followed by a single digit. It causes a specific  The \fB/T\fP modifier must be followed by a single digit. It causes a specific
set of built-in character tables to be passed to \fBpcre[16]_compile()\fP. Itset of built-in character tables to be passed to \fBpcre[16|32]_compile()\fP. It
 is used in the standard PCRE tests to check behaviour with different character  is used in the standard PCRE tests to check behaviour with different character
 tables. The digit specifies the tables as follows:  tables. The digit specifies the tables as follows:
 .sp  .sp
Line 431  The \fB/+\fP modifier works as described above. All ot Line 595  The \fB/+\fP modifier works as described above. All ot
 ignored.  ignored.
 .  .
 .  .
   .SS "Locking out certain modifiers"
   .rs
   .sp
   PCRE can be compiled with or without support for certain features such as
   UTF-8/16/32 or Unicode properties. Accordingly, the standard tests are split up
   into a number of different files that are selected for running depending on
   which features are available. When updating the tests, it is all too easy to
   put a new test into the wrong file by mistake; for example, to put a test that
   requires UTF support into a file that is used when it is not available. To help
   detect such mistakes as early as possible, there is a facility for locking out
   specific modifiers. If an input line for \fBpcretest\fP starts with the string
   "< forbid " the following sequence of characters is taken as a list of
   forbidden modifiers. For example, in the test files that must not use UTF or
   Unicode property support, this line appears:
   .sp
     < forbid 8W
   .sp
   This locks out the /8 and /W modifiers. An immediate error is given if they are
   subsequently encountered. If the character string contains < but not >, all the
   multi-character modifiers that begin with < are locked out. Otherwise, such
   modifiers must be explicitly listed, for example:
   .sp
     < forbid <JS><cr>
   .sp
   There must be a single space between < and "forbid" for this feature to be
   recognised. If there is not, the line is interpreted either as a request to
   re-load a pre-compiled pattern (see "SAVING AND RELOADING COMPILED PATTERNS"
   below) or, if there is a another < character, as a pattern that uses < as its
   delimiter.
   .
   .
 .SH "DATA LINES"  .SH "DATA LINES"
 .rs  .rs
 .sp  .sp
Before each data line is passed to \fBpcre[16]_exec()\fP, leading and trailingBefore each data line is passed to \fBpcre[16|32]_exec()\fP, leading and trailing
 white space is removed, and it is then scanned for \e escapes. Some of these  white space is removed, and it is then scanned for \e escapes. Some of these
 are pretty esoteric features, intended for checking out some of the more  are pretty esoteric features, intended for checking out some of the more
 complicated features of PCRE. If you are just testing "ordinary" regular  complicated features of PCRE. If you are just testing "ordinary" regular
Line 453  recognized: Line 648  recognized:
   \et         tab (\ex09)    \et         tab (\ex09)
   \ev         vertical tab (\ex0b)    \ev         vertical tab (\ex0b)
   \ennn       octal character (up to 3 octal digits); always    \ennn       octal character (up to 3 octal digits); always
               a byte unless > 255 in UTF-8 or 16-bit mode               a byte unless > 255 in UTF-8 or 16-bit or 32-bit mode
   \eo{dd...}  octal character (any number of octal digits}
   \exhh       hexadecimal byte (up to 2 hex digits)    \exhh       hexadecimal byte (up to 2 hex digits)
   \ex{hh...}  hexadecimal character (any number of hex digits)    \ex{hh...}  hexadecimal character (any number of hex digits)
 .\" JOIN  .\" JOIN
  \eA         pass the PCRE_ANCHORED option to \fBpcre[16]_exec()\fP  \eA         pass the PCRE_ANCHORED option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \eB         pass the PCRE_NOTBOL option to \fBpcre[16]_exec()\fP  \eB         pass the PCRE_NOTBOL option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \eCdd       call pcre[16]_copy_substring() for substring dd  \eCdd       call pcre[16|32]_copy_substring() for substring dd
                after a successful match (number less than 32)                 after a successful match (number less than 32)
 .\" JOIN  .\" JOIN
  \eCname     call pcre[16]_copy_named_substring() for substring  \eCname     call pcre[16|32]_copy_named_substring() for substring
                "name" after a successful match (name termin-                 "name" after a successful match (name termin-
                ated by next non alphanumeric character)                 ated by next non alphanumeric character)
 .\" JOIN  .\" JOIN
Line 482  recognized: Line 678  recognized:
 .\" JOIN  .\" JOIN
   \eC*n       pass the number n (may be negative) as callout    \eC*n       pass the number n (may be negative) as callout
                data; this is used as the callout return value                 data; this is used as the callout return value
  \eD         use the \fBpcre[16]_dfa_exec()\fP match function  \eD         use the \fBpcre[16|32]_dfa_exec()\fP match function
  \eF         only shortest match for \fBpcre[16]_dfa_exec()\fP  \eF         only shortest match for \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \eGdd       call pcre[16]_get_substring() for substring dd  \eGdd       call pcre[16|32]_get_substring() for substring dd
                after a successful match (number less than 32)                 after a successful match (number less than 32)
 .\" JOIN  .\" JOIN
  \eGname     call pcre[16]_get_named_substring() for substring  \eGname     call pcre[16|32]_get_named_substring() for substring
                "name" after a successful match (name termin-                 "name" after a successful match (name termin-
                ated by next non-alphanumeric character)                 ated by next non-alphanumeric character)
 .\" JOIN  .\" JOIN
   \eJdd       set up a JIT stack of dd kilobytes maximum (any    \eJdd       set up a JIT stack of dd kilobytes maximum (any
                number of digits)                 number of digits)
 .\" JOIN  .\" JOIN
  \eL         call pcre[16]_get_substringlist() after a  \eL         call pcre[16|32]_get_substringlist() after a
                successful match                 successful match
 .\" JOIN  .\" JOIN
   \eM         discover the minimum MATCH_LIMIT and    \eM         discover the minimum MATCH_LIMIT and
                MATCH_LIMIT_RECURSION settings                 MATCH_LIMIT_RECURSION settings
 .\" JOIN  .\" JOIN
  \eN         pass the PCRE_NOTEMPTY option to \fBpcre[16]_exec()\fP  \eN         pass the PCRE_NOTEMPTY option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP; if used twice, pass the               or \fBpcre[16|32]_dfa_exec()\fP; if used twice, pass the
                PCRE_NOTEMPTY_ATSTART option                 PCRE_NOTEMPTY_ATSTART option
 .\" JOIN  .\" JOIN
   \eOdd       set the size of the output vector passed to    \eOdd       set the size of the output vector passed to
               \fBpcre[16]_exec()\fP to dd (any number of digits)               \fBpcre[16|32]_exec()\fP to dd (any number of digits)
 .\" JOIN  .\" JOIN
  \eP         pass the PCRE_PARTIAL_SOFT option to \fBpcre[16]_exec()\fP  \eP         pass the PCRE_PARTIAL_SOFT option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP; if used twice, pass the               or \fBpcre[16|32]_dfa_exec()\fP; if used twice, pass the
                PCRE_PARTIAL_HARD option                 PCRE_PARTIAL_HARD option
 .\" JOIN  .\" JOIN
   \eQdd       set the PCRE_MATCH_LIMIT_RECURSION limit to dd    \eQdd       set the PCRE_MATCH_LIMIT_RECURSION limit to dd
                (any number of digits)                 (any number of digits)
  \eR         pass the PCRE_DFA_RESTART option to \fBpcre[16]_dfa_exec()\fP  \eR         pass the PCRE_DFA_RESTART option to \fBpcre[16|32]_dfa_exec()\fP
   \eS         output details of memory get/free calls during matching    \eS         output details of memory get/free calls during matching
 .\" JOIN  .\" JOIN
  \eY         pass the PCRE_NO_START_OPTIMIZE option to \fBpcre[16]_exec()\fP  \eY         pass the PCRE_NO_START_OPTIMIZE option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \eZ         pass the PCRE_NOTEOL option to \fBpcre[16]_exec()\fP  \eZ         pass the PCRE_NOTEOL option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \e?         pass the PCRE_NO_UTF[8|16]_CHECK option to  \e?         pass the PCRE_NO_UTF[8|16|32]_CHECK option to
               \fBpcre[16]_exec()\fP or \fBpcre[16]_dfa_exec()\fP               \fBpcre[16|32]_exec()\fP or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
   \e>dd       start the match at offset dd (optional "-"; then    \e>dd       start the match at offset dd (optional "-"; then
                any number of digits); this sets the \fIstartoffset\fP                 any number of digits); this sets the \fIstartoffset\fP
               argument for \fBpcre[16]_exec()\fP or \fBpcre[16]_dfa_exec()\fP               argument for \fBpcre[16|32]_exec()\fP or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \e<cr>      pass the PCRE_NEWLINE_CR option to \fBpcre[16]_exec()\fP  \e<cr>      pass the PCRE_NEWLINE_CR option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \e<lf>      pass the PCRE_NEWLINE_LF option to \fBpcre[16]_exec()\fP  \e<lf>      pass the PCRE_NEWLINE_LF option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \e<crlf>    pass the PCRE_NEWLINE_CRLF option to \fBpcre[16]_exec()\fP  \e<crlf>    pass the PCRE_NEWLINE_CRLF option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \e<anycrlf> pass the PCRE_NEWLINE_ANYCRLF option to \fBpcre[16]_exec()\fP  \e<anycrlf> pass the PCRE_NEWLINE_ANYCRLF option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .\" JOIN  .\" JOIN
  \e<any>     pass the PCRE_NEWLINE_ANY option to \fBpcre[16]_exec()\fP  \e<any>     pass the PCRE_NEWLINE_ANY option to \fBpcre[16|32]_exec()\fP
               or \fBpcre[16]_dfa_exec()\fP               or \fBpcre[16|32]_dfa_exec()\fP
 .sp  .sp
 The use of \ex{hh...} is not dependent on the use of the \fB/8\fP modifier on  The use of \ex{hh...} is not dependent on the use of the \fB/8\fP modifier on
 the pattern. It is recognized always. There may be any number of hexadecimal  the pattern. It is recognized always. There may be any number of hexadecimal
Line 559  for values less than 256, and causes an error for grea Line 755  for values less than 256, and causes an error for grea
 In UTF-16 mode, all 4-digit \ex{hhhh} values are accepted. This makes it  In UTF-16 mode, all 4-digit \ex{hhhh} values are accepted. This makes it
 possible to construct invalid UTF-16 sequences for testing purposes.  possible to construct invalid UTF-16 sequences for testing purposes.
 .P  .P
   In UTF-32 mode, all 4- to 8-digit \ex{...} values are accepted. This makes it
   possible to construct invalid UTF-32 sequences for testing purposes.
   .P
 The escapes that specify line ending sequences are literal strings, exactly as  The escapes that specify line ending sequences are literal strings, exactly as
 shown. No more than one newline setting should be present in any data line.  shown. No more than one newline setting should be present in any data line.
 .P  .P
Line 572  used by the just-in-time optimization code. It is igno Line 771  used by the just-in-time optimization code. It is igno
 is not being used. Providing a stack that is larger than the default 32K is  is not being used. Providing a stack that is larger than the default 32K is
 necessary only for very complicated patterns.  necessary only for very complicated patterns.
 .P  .P
If \eM is present, \fBpcretest\fP calls \fBpcre[16]_exec()\fP several times,If \eM is present, \fBpcretest\fP calls \fBpcre[16|32]_exec()\fP several times,
 with different values in the \fImatch_limit\fP and \fImatch_limit_recursion\fP  with different values in the \fImatch_limit\fP and \fImatch_limit_recursion\fP
fields of the \fBpcre[16]_extra\fP data structure, until it finds the minimumfields of the \fBpcre[16|32]_extra\fP data structure, until it finds the minimum
numbers for each parameter that allow \fBpcre[16]_exec()\fP to complete withoutnumbers for each parameter that allow \fBpcre[16|32]_exec()\fP to complete without
 error. Because this is testing a specific feature of the normal interpretive  error. Because this is testing a specific feature of the normal interpretive
\fBpcre[16]_exec()\fP execution, the use of any JIT optimization that might\fBpcre[16|32]_exec()\fP execution, the use of any JIT optimization that might
 have been set up by the \fB/S+\fP qualifier of \fB-s+\fP option is disabled.  have been set up by the \fB/S+\fP qualifier of \fB-s+\fP option is disabled.
 .P  .P
 The \fImatch_limit\fP number is a measure of the amount of backtracking  The \fImatch_limit\fP number is a measure of the amount of backtracking
Line 590  needed to complete the match attempt. Line 789  needed to complete the match attempt.
 .P  .P
 When \eO is used, the value specified may be higher or lower than the size set  When \eO is used, the value specified may be higher or lower than the size set
 by the \fB-O\fP command line option (or defaulted to 45); \eO applies only to  by the \fB-O\fP command line option (or defaulted to 45); \eO applies only to
the call of \fBpcre[16]_exec()\fP for the line in which it appears.the call of \fBpcre[16|32]_exec()\fP for the line in which it appears.
 .P  .P
 If the \fB/P\fP modifier was present on the pattern, causing the POSIX wrapper  If the \fB/P\fP modifier was present on the pattern, causing the POSIX wrapper
 API to be used, the only option-setting sequences that have any effect are \eB,  API to be used, the only option-setting sequences that have any effect are \eB,
Line 602  to be passed to \fBregexec()\fP. Line 801  to be passed to \fBregexec()\fP.
 .rs  .rs
 .sp  .sp
 By default, \fBpcretest\fP uses the standard PCRE matching function,  By default, \fBpcretest\fP uses the standard PCRE matching function,
\fBpcre[16]_exec()\fP to match each data line. PCRE also supports an\fBpcre[16|32]_exec()\fP to match each data line. PCRE also supports an
alternative matching function, \fBpcre[16]_dfa_test()\fP, which operates in aalternative matching function, \fBpcre[16|32]_dfa_test()\fP, which operates in a
 different way, and has some restrictions. The differences between the two  different way, and has some restrictions. The differences between the two
 functions are described in the  functions are described in the
 .\" HREF  .\" HREF
Line 622  found. This is always the shortest possible match. Line 821  found. This is always the shortest possible match.
 .rs  .rs
 .sp  .sp
 This section describes the output when the normal matching function,  This section describes the output when the normal matching function,
\fBpcre[16]_exec()\fP, is being used.\fBpcre[16|32]_exec()\fP, is being used.
 .P  .P
 When a match succeeds, \fBpcretest\fP outputs the list of captured substrings  When a match succeeds, \fBpcretest\fP outputs the list of captured substrings
that \fBpcre[16]_exec()\fP returns, starting with number 0 for the string thatthat \fBpcre[16|32]_exec()\fP returns, starting with number 0 for the string that
 matched the whole pattern. Otherwise, it outputs "No match" when the return is  matched the whole pattern. Otherwise, it outputs "No match" when the return is
 PCRE_ERROR_NOMATCH, and "Partial match:" followed by the partially matching  PCRE_ERROR_NOMATCH, and "Partial match:" followed by the partially matching
substring when \fBpcre[16]_exec()\fP returns PCRE_ERROR_PARTIAL. (Note thatsubstring when \fBpcre[16|32]_exec()\fP returns PCRE_ERROR_PARTIAL. (Note that
 this is the entire substring that was inspected during the partial match; it  this is the entire substring that was inspected during the partial match; it
 may include characters before the actual match start if a lookbehind assertion,  may include characters before the actual match start if a lookbehind assertion,
 \eK, \eb, or \eB was involved.) For any other return, \fBpcretest\fP outputs  \eK, \eb, or \eB was involved.) For any other return, \fBpcretest\fP outputs
Line 648  at least two. Here is an example of an interactive \fB Line 847  at least two. Here is an example of an interactive \fB
   No match    No match
 .sp  .sp
 Unset capturing substrings that are not followed by one that is set are not  Unset capturing substrings that are not followed by one that is set are not
returned by \fBpcre[16]_exec()\fP, and are not shown by \fBpcretest\fP. In thereturned by \fBpcre[16|32]_exec()\fP, and are not shown by \fBpcretest\fP. In the
 following example, there are two capturing substrings, but when the first data  following example, there are two capturing substrings, but when the first data
 line is matched, the second, unset substring is not shown. An "internal" unset  line is matched, the second, unset substring is not shown. An "internal" unset
 substring is shown as "<unset>", as for the second data line.  substring is shown as "<unset>", as for the second data line.
Line 711  the newline sequence setting). Line 910  the newline sequence setting).
 .SH "OUTPUT FROM THE ALTERNATIVE MATCHING FUNCTION"  .SH "OUTPUT FROM THE ALTERNATIVE MATCHING FUNCTION"
 .rs  .rs
 .sp  .sp
When the alternative matching function, \fBpcre[16]_dfa_exec()\fP, is used (byWhen the alternative matching function, \fBpcre[16|32]_dfa_exec()\fP, is used (by
 means of the \eD escape sequence or the \fB-dfa\fP command line option), the  means of the \eD escape sequence or the \fB-dfa\fP command line option), the
 output consists of a list of all the matches that start at the first point in  output consists of a list of all the matches that start at the first point in
 the subject where there is at least one match. For example:  the subject where there is at least one match. For example:
Line 874  exact copy of the compiled pattern. If there is additi Line 1073  exact copy of the compiled pattern. If there is additi
 writing the file, \fBpcretest\fP expects to read a new pattern.  writing the file, \fBpcretest\fP expects to read a new pattern.
 .P  .P
 A saved pattern can be reloaded into \fBpcretest\fP by specifying < and a file  A saved pattern can be reloaded into \fBpcretest\fP by specifying < and a file
name instead of a pattern. The name of the file must not contain a < character,name instead of a pattern. There must be no space between < and the file name,
as otherwise \fBpcretest\fP will interpret the line as a pattern delimited by <which must not contain a < character, as otherwise \fBpcretest\fP will
characters.interpret the line as a pattern delimited by < characters. For example:
For example: 
 .sp  .sp
    re> </some/file     re> </some/file
   Compiled pattern loaded from /some/file    Compiled pattern loaded from /some/file
Line 917  result is undefined. Line 1115  result is undefined.
 .SH "SEE ALSO"  .SH "SEE ALSO"
 .rs  .rs
 .sp  .sp
\fBpcre\fP(3), \fBpcre16\fP(3), \fBpcreapi\fP(3)\fBpcrecallout\fP(3),\fBpcre\fP(3), \fBpcre16\fP(3), \fBpcre32\fP(3), \fBpcreapi\fP(3),
 \fBpcrecallout\fP(3),
 \fBpcrejit\fP, \fBpcrematching\fP(3), \fBpcrepartial\fP(d),  \fBpcrejit\fP, \fBpcrematching\fP(3), \fBpcrepartial\fP(d),
 \fBpcrepattern\fP(3), \fBpcreprecompile\fP(3).  \fBpcrepattern\fP(3), \fBpcreprecompile\fP(3).
 .  .
Line 936  Cambridge CB2 3QH, England. Line 1135  Cambridge CB2 3QH, England.
 .rs  .rs
 .sp  .sp
 .nf  .nf
Last updated: 14 January 2012Last updated: 12 November 2013
Copyright (c) 1997-2012 University of Cambridge.Copyright (c) 1997-2013 University of Cambridge.
 .fi  .fi

Removed from v.1.1.1.2  
changed lines
  Added in v.1.1.1.5


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>