--- embedaddon/pcre/doc/pcretest.txt 2012/02/21 23:05:52 1.1.1.1 +++ embedaddon/pcre/doc/pcretest.txt 2012/02/21 23:50:25 1.1.1.2 @@ -14,56 +14,95 @@ SYNOPSIS expressions. This document describes the features of the test program; for details of the regular expressions themselves, see the pcrepattern documentation. For details of the PCRE library function calls and their - options, see the pcreapi documentation. The input for pcretest is a - sequence of regular expression patterns and strings to be matched, as - described below. The output shows the result of each match. Options on - the command line and the patterns control PCRE options and exactly what - is output. + options, see the pcreapi and pcre16 documentation. The input for + pcretest is a sequence of regular expression patterns and strings to be + matched, as described below. The output shows the result of each match. + Options on the command line and the patterns control PCRE options and + exactly what is output. +PCRE's 8-BIT and 16-BIT LIBRARIES + + From release 8.30, two separate PCRE libraries can be built. The origi- + nal one supports 8-bit character strings, whereas the newer 16-bit + library supports character strings encoded in 16-bit units. The + pcretest program can be used to test both libraries. However, it is + itself still an 8-bit program, reading 8-bit input and writing 8-bit + output. When testing the 16-bit library, the patterns and data strings + are converted to 16-bit format before being passed to the PCRE library + functions. Results are converted to 8-bit for output. + + References to functions and structures of the form pcre[16]_xx below + mean "pcre_xx when using the 8-bit library or pcre16_xx when using the + 16-bit library". + + COMMAND LINE OPTIONS - -b Behave as if each pattern has the /B (show byte code) modi- + -16 If both the 8-bit and the 16-bit libraries have been built, + this option causes the 16-bit library to be used. If only the + 16-bit library has been built, this is the default (so has no + effect). If only the 8-bit library has been built, this + option causes an error. + + -b Behave as if each pattern has the /B (show byte code) modi- fier; the internal form is output after compilation. -C Output the version number of the PCRE library, and all avail- - able information about the optional features that are - included, and then exit. + able information about the optional features that are + included, and then exit. All other options are ignored. - -d Behave as if each pattern has the /D (debug) modifier; the - internal form and information about the compiled pattern is + -C option Output information about a specific build-time option, then + exit. This functionality is intended for use in scripts such + as RunTest. The following options output the value indicated: + + linksize the internal link size (2, 3, or 4) + newline the default newline setting: + CR, LF, CRLF, ANYCRLF, or ANY + + The following options output 1 for true or zero for false: + + jit just-in-time support is available + pcre16 the 16-bit library was built + pcre8 the 8-bit library was built + ucp Unicode property support is available + utf UTF-8 and/or UTF-16 support is available + + -d Behave as if each pattern has the /D (debug) modifier; the + internal form and information about the compiled pattern is output after compilation; -d is equivalent to -b -i. - -dfa Behave as if each data line contains the \D escape sequence; + -dfa Behave as if each data line contains the \D escape sequence; this causes the alternative matching function, - pcre_dfa_exec(), to be used instead of the standard - pcre_exec() function (more detail is given below). + pcre[16]_dfa_exec(), to be used instead of the standard + pcre[16]_exec() function (more detail is given below). -help Output a brief summary these options and then exit. - -i Behave as if each pattern has the /I modifier; information + -i Behave as if each pattern has the /I modifier; information about the compiled pattern is given after compilation. - -M Behave as if each data line contains the \M escape sequence; - this causes PCRE to discover the minimum MATCH_LIMIT and - MATCH_LIMIT_RECURSION settings by calling pcre_exec() repeat- - edly with different limits. + -M Behave as if each data line contains the \M escape sequence; + this causes PCRE to discover the minimum MATCH_LIMIT and + MATCH_LIMIT_RECURSION settings by calling pcre[16]_exec() + repeatedly with different limits. - -m Output the size of each compiled pattern after it has been - compiled. This is equivalent to adding /M to each regular - expression. + -m Output the size of each compiled pattern after it has been + compiled. This is equivalent to adding /M to each regular + expression. The size is given in bytes for both libraries. - -o osize Set the number of elements in the output vector that is used - when calling pcre_exec() or pcre_dfa_exec() to be osize. The - default value is 45, which is enough for 14 capturing subex- - pressions for pcre_exec() or 22 different matches for - pcre_dfa_exec(). The vector size can be changed for individ- - ual matching calls by including \O in the data line (see - below). + -o osize Set the number of elements in the output vector that is used + when calling pcre[16]_exec() or pcre[16]_dfa_exec() to be + osize. The default value is 45, which is enough for 14 cap- + turing subexpressions for pcre[16]_exec() or 22 different + matches for pcre[16]_dfa_exec(). The vector size can be + changed for individual matching calls by including \O in the + data line (see below). - -p Behave as if each pattern has the /P modifier; the POSIX - wrapper API is used to call PCRE. None of the other options - has any effect when -p is set. + -p Behave as if each pattern has the /P modifier; the POSIX + wrapper API is used to call PCRE. None of the other options + has any effect when -p is set. This option can be used only + with the 8-bit library. -q Do not output the version number of pcretest at the start of execution. @@ -73,26 +112,28 @@ COMMAND LINE OPTIONS -s or -s+ Behave as if each pattern has the /S modifier; in other words, force each pattern to be studied. If -s+ is used, the - PCRE_STUDY_JIT_COMPILE flag is passed to pcre_study(), caus- - ing just-in-time optimization to be set up if it is avail- - able. If the /I or /D option is present on a pattern + PCRE_STUDY_JIT_COMPILE flag is passed to pcre[16]_study(), + causing just-in-time optimization to be set up if it is + available. If the /I or /D option is present on a pattern (requesting output about the compiled pattern), information about the result of studying is not included when studying is caused only by -s and neither -i nor -d is present on the command line. This behaviour means that the output from tests that are run with and without -s should be identical, except when options that output information about the actual running - of a match are set. The -M, -t, and -tm options, which give - information about resources used, are likely to produce dif- - ferent output with and without -s. Output may also differ if - the /C option is present on an individual pattern. This uses - callouts to trace the the matching process, and this may be - different between studied and non-studied patterns. If the - pattern contains (*MARK) items there may also be differences, - for the same reason. The -s command line option can be over- - ridden for specific patterns that should never be studied - (see the /S pattern modifier below). + of a match are set. + The -M, -t, and -tm options, which give information about + resources used, are likely to produce different output with + and without -s. Output may also differ if the /C option is + present on an individual pattern. This uses callouts to trace + the the matching process, and this may be different between + studied and non-studied patterns. If the pattern contains + (*MARK) items there may also be differences, for the same + reason. The -s command line option can be overridden for spe- + cific patterns that should never be studied (see the /S pat- + tern modifier below). + -t Run each compile, study, and match many times with a timer, and output resulting time per compile or match (in millisec- onds). Do not set -m with -t, because you will then get the @@ -173,7 +214,7 @@ PATTERN MODIFIERS and the first modifier, and between the modifiers themselves. The /i, /m, /s, and /x modifiers set the PCRE_CASELESS, PCRE_MULTILINE, - PCRE_DOTALL, or PCRE_EXTENDED options, respectively, when pcre_com- + PCRE_DOTALL, or PCRE_EXTENDED options, respectively, when pcre[16]_com- pile() is called. These four modifier letters have the same effect as they do in Perl. For example: @@ -182,8 +223,12 @@ PATTERN MODIFIERS The following table shows additional modifiers for setting PCRE com- pile-time options that do not correspond to anything in Perl: - /8 PCRE_UTF8 - /? PCRE_NO_UTF8_CHECK + /8 PCRE_UTF8 ) when using the 8-bit + /? PCRE_NO_UTF8_CHECK ) library + + /8 PCRE_UTF16 ) when using the 16-bit + /? PCRE_NO_UTF16_CHECK ) library + /A PCRE_ANCHORED /C PCRE_AUTO_CALLOUT /E PCRE_DOLLAR_ENDONLY @@ -210,143 +255,147 @@ PATTERN MODIFIERS /^abc/m - As well as turning on the PCRE_UTF8 option, the /8 modifier also causes - any non-printing characters in output strings to be printed using the - \x{hh...} notation if they are valid UTF-8 sequences. Full details of - the PCRE options are given in the pcreapi documentation. + As well as turning on the PCRE_UTF8/16 option, the /8 modifier causes + all non-printing characters in output strings to be printed using the + \x{hh...} notation. Otherwise, those less than 0x100 are output in hex + without the curly brackets. + Full details of the PCRE options are given in the pcreapi documenta- + tion. + Finding all matches in a string - Searching for all possible matches within each subject string can be - requested by the /g or /G modifier. After finding a match, PCRE is + Searching for all possible matches within each subject string can be + requested by the /g or /G modifier. After finding a match, PCRE is called again to search the remainder of the subject string. The differ- ence between /g and /G is that the former uses the startoffset argument - to pcre_exec() to start searching at a new point within the entire - string (which is in effect what Perl does), whereas the latter passes - over a shortened substring. This makes a difference to the matching + to pcre[16]_exec() to start searching at a new point within the entire + string (which is in effect what Perl does), whereas the latter passes + over a shortened substring. This makes a difference to the matching process if the pattern begins with a lookbehind assertion (including \b or \B). - If any call to pcre_exec() in a /g or /G sequence matches an empty - string, the next call is done with the PCRE_NOTEMPTY_ATSTART and - PCRE_ANCHORED flags set in order to search for another, non-empty, - match at the same point. If this second match fails, the start offset - is advanced, and the normal match is retried. This imitates the way + If any call to pcre[16]_exec() in a /g or /G sequence matches an empty + string, the next call is done with the PCRE_NOTEMPTY_ATSTART and + PCRE_ANCHORED flags set in order to search for another, non-empty, + match at the same point. If this second match fails, the start offset + is advanced, and the normal match is retried. This imitates the way Perl handles such cases when using the /g modifier or the split() func- - tion. Normally, the start offset is advanced by one character, but if - the newline convention recognizes CRLF as a newline, and the current + tion. Normally, the start offset is advanced by one character, but if + the newline convention recognizes CRLF as a newline, and the current character is CR followed by LF, an advance of two is used. Other modifiers There are yet more modifiers for controlling the way pcretest operates. - The /+ modifier requests that as well as outputting the substring that - matched the entire pattern, pcretest should in addition output the - remainder of the subject string. This is useful for tests where the - subject contains multiple copies of the same substring. If the + modi- - fier appears twice, the same action is taken for captured substrings. - In each case the remainder is output on the following line with a plus - character following the capture number. Note that this modifier must + The /+ modifier requests that as well as outputting the substring that + matched the entire pattern, pcretest should in addition output the + remainder of the subject string. This is useful for tests where the + subject contains multiple copies of the same substring. If the + modi- + fier appears twice, the same action is taken for captured substrings. + In each case the remainder is output on the following line with a plus + character following the capture number. Note that this modifier must not immediately follow the /S modifier because /S+ has another meaning. - The /= modifier requests that the values of all potential captured - parentheses be output after a match by pcre_exec(). By default, only - those up to the highest one actually used in the match are output (cor- - responding to the return code from pcre_exec()). Values in the offsets - vector corresponding to higher numbers should be set to -1, and these - are output as "". This modifier gives a way of checking that - this is happening. + The /= modifier requests that the values of all potential captured + parentheses be output after a match. By default, only those up to the + highest one actually used in the match are output (corresponding to the + return code from pcre[16]_exec()). Values in the offsets vector corre- + sponding to higher numbers should be set to -1, and these are output as + "". This modifier gives a way of checking that this is happen- + ing. - The /B modifier is a debugging feature. It requests that pcretest out- - put a representation of the compiled byte code after compilation. Nor- - mally this information contains length and offset values; however, if - /Z is also present, this data is replaced by spaces. This is a special - feature for use in the automatic test scripts; it ensures that the same + The /B modifier is a debugging feature. It requests that pcretest out- + put a representation of the compiled code after compilation. Normally + this information contains length and offset values; however, if /Z is + also present, this data is replaced by spaces. This is a special fea- + ture for use in the automatic test scripts; it ensures that the same output is generated for different internal link sizes. - The /D modifier is a PCRE debugging feature, and is equivalent to /BI, + The /D modifier is a PCRE debugging feature, and is equivalent to /BI, that is, both the /B and the /I modifiers. - The /F modifier causes pcretest to flip the byte order of the fields in - the compiled pattern that contain 2-byte and 4-byte numbers. This - facility is for testing the feature in PCRE that allows it to execute - patterns that were compiled on a host with a different endianness. This - feature is not available when the POSIX interface to PCRE is being - used, that is, when the /P pattern modifier is specified. See also the - section about saving and reloading compiled patterns below. + The /F modifier causes pcretest to flip the byte order of the 2-byte + and 4-byte fields in the compiled pattern. This facility is for testing + the feature in PCRE that allows it to execute patterns that were com- + piled on a host with a different endianness. This feature is not avail- + able when the POSIX interface to PCRE is being used, that is, when the + /P pattern modifier is specified. See also the section about saving and + reloading compiled patterns below. - The /I modifier requests that pcretest output information about the - compiled pattern (whether it is anchored, has a fixed first character, - and so on). It does this by calling pcre_fullinfo() after compiling a - pattern. If the pattern is studied, the results of that are also out- + The /I modifier requests that pcretest output information about the + compiled pattern (whether it is anchored, has a fixed first character, + and so on). It does this by calling pcre[16]_fullinfo() after compiling + a pattern. If the pattern is studied, the results of that are also out- put. - The /K modifier requests pcretest to show names from backtracking con- - trol verbs that are returned from calls to pcre_exec(). It causes - pcretest to create a pcre_extra block if one has not already been cre- - ated by a call to pcre_study(), and to set the PCRE_EXTRA_MARK flag and - the mark field within it, every time that pcre_exec() is called. If the - variable that the mark field points to is non-NULL for a match, non- - match, or partial match, pcretest prints the string to which it points. - For a match, this is shown on a line by itself, tagged with "MK:". For - a non-match it is added to the message. + The /K modifier requests pcretest to show names from backtracking con- + trol verbs that are returned from calls to pcre[16]_exec(). It causes + pcretest to create a pcre[16]_extra block if one has not already been + created by a call to pcre[16]_study(), and to set the PCRE_EXTRA_MARK + flag and the mark field within it, every time that pcre[16]_exec() is + called. If the variable that the mark field points to is non-NULL for a + match, non-match, or partial match, pcretest prints the string to which + it points. For a match, this is shown on a line by itself, tagged with + "MK:". For a non-match it is added to the message. - The /L modifier must be followed directly by the name of a locale, for + The /L modifier must be followed directly by the name of a locale, for example, /pattern/Lfr_FR For this reason, it must be the last modifier. The given locale is set, - pcre_maketables() is called to build a set of character tables for the - locale, and this is then passed to pcre_compile() when compiling the - regular expression. Without an /L (or /T) modifier, NULL is passed as - the tables pointer; that is, /L applies only to the expression on which - it appears. + pcre[16]_maketables() is called to build a set of character tables for + the locale, and this is then passed to pcre[16]_compile() when compil- + ing the regular expression. Without an /L (or /T) modifier, NULL is + passed as the tables pointer; that is, /L applies only to the expres- + sion on which it appears. - The /M modifier causes the size of memory block used to hold the com- - piled pattern to be output. This does not include the size of the pcre - block; it is just the actual compiled data. If the pattern is success- - fully studied with the PCRE_STUDY_JIT_COMPILE option, the size of the - JIT compiled code is also output. + The /M modifier causes the size in bytes of the memory block used to + hold the compiled pattern to be output. This does not include the size + of the pcre[16] block; it is just the actual compiled data. If the pat- + tern is successfully studied with the PCRE_STUDY_JIT_COMPILE option, + the size of the JIT compiled code is also output. - If the /S modifier appears once, it causes pcre_study() to be called - after the expression has been compiled, and the results used when the - expression is matched. If /S appears twice, it suppresses studying, - even if it was requested externally by the -s command line option. This - makes it possible to specify that certain patterns are always studied, - and others are never studied, independently of -s. This feature is used - in the test files in a few cases where the output is different when the - pattern is studied. + If the /S modifier appears once, it causes pcre[16]_study() to be + called after the expression has been compiled, and the results used + when the expression is matched. If /S appears twice, it suppresses + studying, even if it was requested externally by the -s command line + option. This makes it possible to specify that certain patterns are + always studied, and others are never studied, independently of -s. This + feature is used in the test files in a few cases where the output is + different when the pattern is studied. - If the /S modifier is immediately followed by a + character, the call - to pcre_study() is made with the PCRE_STUDY_JIT_COMPILE option, - requesting just-in-time optimization support if it is available. Note - that there is also a /+ modifier; it must not be given immediately - after /S because this will be misinterpreted. If JIT studying is suc- - cessful, it will automatically be used when pcre_exec() is run, except - when incompatible run-time options are specified. These include the - partial matching options; a complete list is given in the pcrejit docu- - mentation. See also the \J escape sequence below for a way of setting - the size of the JIT stack. + If the /S modifier is immediately followed by a + character, the call + to pcre[16]_study() is made with the PCRE_STUDY_JIT_COMPILE option, + requesting just-in-time optimization support if it is available. Note + that there is also a /+ modifier; it must not be given immediately + after /S because this will be misinterpreted. If JIT studying is suc- + cessful, it will automatically be used when pcre[16]_exec() is run, + except when incompatible run-time options are specified. These include + the partial matching options; a complete list is given in the pcrejit + documentation. See also the \J escape sequence below for a way of set- + ting the size of the JIT stack. - The /T modifier must be followed by a single digit. It causes a spe- - cific set of built-in character tables to be passed to pcre_compile(). - It is used in the standard PCRE tests to check behaviour with different - character tables. The digit specifies the tables as follows: + The /T modifier must be followed by a single digit. It causes a spe- + cific set of built-in character tables to be passed to pcre[16]_com- + pile(). It is used in the standard PCRE tests to check behaviour with + different character tables. The digit specifies the tables as follows: 0 the default ASCII tables, as distributed in pcre_chartables.c.dist 1 a set of tables defining ISO 8859 characters - In table 1, some characters whose codes are greater than 128 are iden- + In table 1, some characters whose codes are greater than 128 are iden- tified as letters, digits, spaces, etc. Using the POSIX wrapper API - The /P modifier causes pcretest to call PCRE via the POSIX wrapper API - rather than its native API. When /P is set, the following modifiers set - options for the regcomp() function: + The /P modifier causes pcretest to call PCRE via the POSIX wrapper API + rather than its native API. This supports only the 8-bit library. When + /P is set, the following modifiers set options for the regcomp() func- + tion: /i REG_ICASE /m REG_NEWLINE @@ -362,12 +411,12 @@ PATTERN MODIFIERS DATA LINES - Before each data line is passed to pcre_exec(), leading and trailing - white space is removed, and it is then scanned for \ escapes. Some of - these are pretty esoteric features, intended for checking out some of - the more complicated features of PCRE. If you are just testing "ordi- - nary" regular expressions, you probably don't need any of these. The - following escapes are recognized: + Before each data line is passed to pcre[16]_exec(), leading and trail- + ing white space is removed, and it is then scanned for \ escapes. Some + of these are pretty esoteric features, intended for checking out some + of the more complicated features of PCRE. If you are just testing + "ordinary" regular expressions, you probably don't need any of these. + The following escapes are recognized: \a alarm (BEL, \x07) \b backspace (\x08) @@ -379,18 +428,17 @@ DATA LINES \r carriage return (\x0d) \t tab (\x09) \v vertical tab (\x0b) - \nnn octal character (up to 3 octal digits) - always a byte unless > 255 in UTF-8 mode + \nnn octal character (up to 3 octal digits); always + a byte unless > 255 in UTF-8 or 16-bit mode \xhh hexadecimal byte (up to 2 hex digits) - \x{hh...} hexadecimal character, any number of digits - in UTF-8 mode - \A pass the PCRE_ANCHORED option to pcre_exec() - or pcre_dfa_exec() - \B pass the PCRE_NOTBOL option to pcre_exec() - or pcre_dfa_exec() - \Cdd call pcre_copy_substring() for substring dd + \x{hh...} hexadecimal character (any number of hex digits) + \A pass the PCRE_ANCHORED option to pcre[16]_exec() + or pcre[16]_dfa_exec() + \B pass the PCRE_NOTBOL option to pcre[16]_exec() + or pcre[16]_dfa_exec() + \Cdd call pcre[16]_copy_substring() for substring dd after a successful match (number less than 32) - \Cname call pcre_copy_named_substring() for substring + \Cname call pcre[16]_copy_named_substring() for substring "name" after a successful match (name termin- ated by next non alphanumeric character) \C+ show the current captured substrings at callout @@ -402,118 +450,118 @@ DATA LINES reached for the nth time \C*n pass the number n (may be negative) as callout data; this is used as the callout return value - \D use the pcre_dfa_exec() match function - \F only shortest match for pcre_dfa_exec() - \Gdd call pcre_get_substring() for substring dd + \D use the pcre[16]_dfa_exec() match function + \F only shortest match for pcre[16]_dfa_exec() + \Gdd call pcre[16]_get_substring() for substring dd after a successful match (number less than 32) - \Gname call pcre_get_named_substring() for substring + \Gname call pcre[16]_get_named_substring() for substring "name" after a successful match (name termin- ated by next non-alphanumeric character) \Jdd set up a JIT stack of dd kilobytes maximum (any number of digits) - \L call pcre_get_substringlist() after a + \L call pcre[16]_get_substringlist() after a successful match \M discover the minimum MATCH_LIMIT and MATCH_LIMIT_RECURSION settings - \N pass the PCRE_NOTEMPTY option to pcre_exec() - or pcre_dfa_exec(); if used twice, pass the + \N pass the PCRE_NOTEMPTY option to pcre[16]_exec() + or pcre[16]_dfa_exec(); if used twice, pass the PCRE_NOTEMPTY_ATSTART option \Odd set the size of the output vector passed to - pcre_exec() to dd (any number of digits) - \P pass the PCRE_PARTIAL_SOFT option to pcre_exec() - or pcre_dfa_exec(); if used twice, pass the + pcre[16]_exec() to dd (any number of digits) + \P pass the PCRE_PARTIAL_SOFT option to pcre[16]_exec() + or pcre[16]_dfa_exec(); if used twice, pass the PCRE_PARTIAL_HARD option \Qdd set the PCRE_MATCH_LIMIT_RECURSION limit to dd (any number of digits) - \R pass the PCRE_DFA_RESTART option to pcre_dfa_exec() + \R pass the PCRE_DFA_RESTART option to pcre[16]_dfa_exec() \S output details of memory get/free calls during matching - \Y pass the PCRE_NO_START_OPTIMIZE option to pcre_exec() - or pcre_dfa_exec() - \Z pass the PCRE_NOTEOL option to pcre_exec() - or pcre_dfa_exec() - \? pass the PCRE_NO_UTF8_CHECK option to - pcre_exec() or pcre_dfa_exec() + \Y pass the PCRE_NO_START_OPTIMIZE option to pcre[16]_exec() + or pcre[16]_dfa_exec() + \Z pass the PCRE_NOTEOL option to pcre[16]_exec() + or pcre[16]_dfa_exec() + \? pass the PCRE_NO_UTF[8|16]_CHECK option to + pcre[16]_exec() or pcre[16]_dfa_exec() \>dd start the match at offset dd (optional "-"; then any number of digits); this sets the startoffset - argument for pcre_exec() or pcre_dfa_exec() - \ pass the PCRE_NEWLINE_CR option to pcre_exec() - or pcre_dfa_exec() - \ pass the PCRE_NEWLINE_LF option to pcre_exec() - or pcre_dfa_exec() - \ pass the PCRE_NEWLINE_CRLF option to pcre_exec() - or pcre_dfa_exec() - \ pass the PCRE_NEWLINE_ANYCRLF option to pcre_exec() - or pcre_dfa_exec() - \ pass the PCRE_NEWLINE_ANY option to pcre_exec() - or pcre_dfa_exec() + argument for pcre[16]_exec() or pcre[16]_dfa_exec() + \ pass the PCRE_NEWLINE_CR option to pcre[16]_exec() + or pcre[16]_dfa_exec() + \ pass the PCRE_NEWLINE_LF option to pcre[16]_exec() + or pcre[16]_dfa_exec() + \ pass the PCRE_NEWLINE_CRLF option to pcre[16]_exec() + or pcre[16]_dfa_exec() + \ pass the PCRE_NEWLINE_ANYCRLF option to pcre[16]_exec() + or pcre[16]_dfa_exec() + \ pass the PCRE_NEWLINE_ANY option to pcre[16]_exec() + or pcre[16]_dfa_exec() - Note that \xhh always specifies one byte, even in UTF-8 mode; this - makes it possible to construct invalid UTF-8 sequences for testing pur- - poses. On the other hand, \x{hh} is interpreted as a UTF-8 character in - UTF-8 mode, generating more than one byte if the value is greater than - 127. When not in UTF-8 mode, it generates one byte for values less than - 256, and causes an error for greater values. + The use of \x{hh...} is not dependent on the use of the /8 modifier on + the pattern. It is recognized always. There may be any number of hexa- + decimal digits inside the braces; invalid values provoke error mes- + sages. - The escapes that specify line ending sequences are literal strings, + Note that \xhh specifies one byte rather than one character in UTF-8 + mode; this makes it possible to construct invalid UTF-8 sequences for + testing purposes. On the other hand, \x{hh} is interpreted as a UTF-8 + character in UTF-8 mode, generating more than one byte if the value is + greater than 127. When testing the 8-bit library not in UTF-8 mode, + \x{hh} generates one byte for values less than 256, and causes an error + for greater values. + + In UTF-16 mode, all 4-digit \x{hhhh} values are accepted. This makes it + possible to construct invalid UTF-16 sequences for testing purposes. + + The escapes that specify line ending sequences are literal strings, exactly as shown. No more than one newline setting should be present in any data line. - A backslash followed by anything else just escapes the anything else. - If the very last character is a backslash, it is ignored. This gives a - way of passing an empty line as data, since a real empty line termi- + A backslash followed by anything else just escapes the anything else. + If the very last character is a backslash, it is ignored. This gives a + way of passing an empty line as data, since a real empty line termi- nates the data input. - The \J escape provides a way of setting the maximum stack size that is - used by the just-in-time optimization code. It is ignored if JIT opti- - mization is not being used. Providing a stack that is larger than the + The \J escape provides a way of setting the maximum stack size that is + used by the just-in-time optimization code. It is ignored if JIT opti- + mization is not being used. Providing a stack that is larger than the default 32K is necessary only for very complicated patterns. - If \M is present, pcretest calls pcre_exec() several times, with dif- - ferent values in the match_limit and match_limit_recursion fields of - the pcre_extra data structure, until it finds the minimum numbers for - each parameter that allow pcre_exec() to complete without error. - Because this is testing a specific feature of the normal interpretive - pcre_exec() execution, the use of any JIT optimization that might have - been set up by the /S+ qualifier of -s+ option is disabled. + If \M is present, pcretest calls pcre[16]_exec() several times, with + different values in the match_limit and match_limit_recursion fields of + the pcre[16]_extra data structure, until it finds the minimum numbers + for each parameter that allow pcre[16]_exec() to complete without + error. Because this is testing a specific feature of the normal inter- + pretive pcre[16]_exec() execution, the use of any JIT optimization that + might have been set up by the /S+ qualifier of -s+ option is disabled. - The match_limit number is a measure of the amount of backtracking that - takes place, and checking it out can be instructive. For most simple - matches, the number is quite small, but for patterns with very large - numbers of matching possibilities, it can become large very quickly - with increasing length of subject string. The match_limit_recursion - number is a measure of how much stack (or, if PCRE is compiled with - NO_RECURSE, how much heap) memory is needed to complete the match + The match_limit number is a measure of the amount of backtracking that + takes place, and checking it out can be instructive. For most simple + matches, the number is quite small, but for patterns with very large + numbers of matching possibilities, it can become large very quickly + with increasing length of subject string. The match_limit_recursion + number is a measure of how much stack (or, if PCRE is compiled with + NO_RECURSE, how much heap) memory is needed to complete the match attempt. - When \O is used, the value specified may be higher or lower than the + When \O is used, the value specified may be higher or lower than the size set by the -O command line option (or defaulted to 45); \O applies - only to the call of pcre_exec() for the line in which it appears. + only to the call of pcre[16]_exec() for the line in which it appears. - If the /P modifier was present on the pattern, causing the POSIX wrap- - per API to be used, the only option-setting sequences that have any - effect are \B, \N, and \Z, causing REG_NOTBOL, REG_NOTEMPTY, and + If the /P modifier was present on the pattern, causing the POSIX wrap- + per API to be used, the only option-setting sequences that have any + effect are \B, \N, and \Z, causing REG_NOTBOL, REG_NOTEMPTY, and REG_NOTEOL, respectively, to be passed to regexec(). - The use of \x{hh...} to represent UTF-8 characters is not dependent on - the use of the /8 modifier on the pattern. It is recognized always. - There may be any number of hexadecimal digits inside the braces. The - result is from one to six bytes, encoded according to the original - UTF-8 rules of RFC 2279. This allows for values in the range 0 to - 0x7FFFFFFF. Note that not all of those are valid Unicode code points, - or indeed valid UTF-8 characters according to the later rules in RFC - 3629. - THE ALTERNATIVE MATCHING FUNCTION By default, pcretest uses the standard PCRE matching function, - pcre_exec() to match each data line. From release 6.0, PCRE supports an - alternative matching function, pcre_dfa_test(), which operates in a - different way, and has some restrictions. The differences between the - two functions are described in the pcrematching documentation. + pcre[16]_exec() to match each data line. PCRE also supports an alterna- + tive matching function, pcre[16]_dfa_test(), which operates in a dif- + ferent way, and has some restrictions. The differences between the two + functions are described in the pcrematching documentation. If a data line contains the \D escape sequence, or if the command line - contains the -dfa option, the alternative matching function is called. + contains the -dfa option, the alternative matching function is used. This function finds all possible matches at a given point. If, however, the \F escape sequence is present in the data line, it stops after the first match is found. This is always the shortest possible match. @@ -522,21 +570,22 @@ THE ALTERNATIVE MATCHING FUNCTION DEFAULT OUTPUT FROM PCRETEST This section describes the output when the normal matching function, - pcre_exec(), is being used. + pcre[16]_exec(), is being used. When a match succeeds, pcretest outputs the list of captured substrings - that pcre_exec() returns, starting with number 0 for the string that - matched the whole pattern. Otherwise, it outputs "No match" when the - return is PCRE_ERROR_NOMATCH, and "Partial match:" followed by the par- - tially matching substring when pcre_exec() returns PCRE_ERROR_PARTIAL. - (Note that this is the entire substring that was inspected during the - partial match; it may include characters before the actual match start - if a lookbehind assertion, \K, \b, or \B was involved.) For any other - return, pcretest outputs the PCRE negative error number and a short - descriptive phrase. If the error is a failed UTF-8 string check, the - byte offset of the start of the failing character and the reason code - are also output, provided that the size of the output vector is at - least two. Here is an example of an interactive pcretest run. + that pcre[16]_exec() returns, starting with number 0 for the string + that matched the whole pattern. Otherwise, it outputs "No match" when + the return is PCRE_ERROR_NOMATCH, and "Partial match:" followed by the + partially matching substring when pcre[16]_exec() returns + PCRE_ERROR_PARTIAL. (Note that this is the entire substring that was + inspected during the partial match; it may include characters before + the actual match start if a lookbehind assertion, \K, \b, or \B was + involved.) For any other return, pcretest outputs the PCRE negative + error number and a short descriptive phrase. If the error is a failed + UTF string check, the offset of the start of the failing character and + the reason code are also output, provided that the size of the output + vector is at least two. Here is an example of an interactive pcretest + run. $ pcretest PCRE version 8.13 2011-04-30 @@ -549,10 +598,10 @@ DEFAULT OUTPUT FROM PCRETEST No match Unset capturing substrings that are not followed by one that is set are - not returned by pcre_exec(), and are not shown by pcretest. In the fol- - lowing example, there are two capturing substrings, but when the first - data line is matched, the second, unset substring is not shown. An - "internal" unset substring is shown as "", as for the second + not returned by pcre[16]_exec(), and are not shown by pcretest. In the + following example, there are two capturing substrings, but when the + first data line is matched, the second, unset substring is not shown. + An "internal" unset substring is shown as "", as for the second data line. re> /(a)|(b)/ @@ -564,19 +613,19 @@ DEFAULT OUTPUT FROM PCRETEST 1: 2: b - If the strings contain any non-printing characters, they are output as - \0x escapes, or as \x{...} escapes if the /8 modifier was present on - the pattern. See below for the definition of non-printing characters. - If the pattern has the /+ modifier, the output for substring 0 is fol- - lowed by the the rest of the subject string, identified by "0+" like - this: + If the strings contain any non-printing characters, they are output as + \xhh escapes if the value is less than 256 and UTF mode is not set. + Otherwise they are output as \x{hh...} escapes. See below for the defi- + nition of non-printing characters. If the pattern has the /+ modifier, + the output for substring 0 is followed by the the rest of the subject + string, identified by "0+" like this: re> /cat/+ data> cataract 0: cat 0+ aract - If the pattern has the /g or /G modifier, the results of successive + If the pattern has the /g or /G modifier, the results of successive matching attempts are output in sequence, like this: re> /\Bi(\w\w)/g @@ -588,33 +637,34 @@ DEFAULT OUTPUT FROM PCRETEST 0: ipp 1: pp - "No match" is output only if the first match attempt fails. Here is an - example of a failure message (the offset 4 that is specified by \>4 is + "No match" is output only if the first match attempt fails. Here is an + example of a failure message (the offset 4 that is specified by \>4 is past the end of the subject string): re> /xyz/ data> xyz\>4 Error -24 (bad offset value) - If any of the sequences \C, \G, or \L are present in a data line that - is successfully matched, the substrings extracted by the convenience + If any of the sequences \C, \G, or \L are present in a data line that + is successfully matched, the substrings extracted by the convenience functions are output with C, G, or L after the string number instead of a colon. This is in addition to the normal full list. The string length - (that is, the return from the extraction function) is given in paren- + (that is, the return from the extraction function) is given in paren- theses after each string for \C and \G. Note that whereas patterns can be continued over several lines (a plain ">" prompt is used for continuations), data lines may not. However new- - lines can be included in data by means of the \n escape (or \r, \r\n, + lines can be included in data by means of the \n escape (or \r, \r\n, etc., depending on the newline sequence setting). OUTPUT FROM THE ALTERNATIVE MATCHING FUNCTION - When the alternative matching function, pcre_dfa_exec(), is used (by - means of the \D escape sequence or the -dfa command line option), the - output consists of a list of all the matches that start at the first - point in the subject where there is at least one match. For example: + When the alternative matching function, pcre[16]_dfa_exec(), is used + (by means of the \D escape sequence or the -dfa command line option), + the output consists of a list of all the matches that start at the + first point in the subject where there is at least one match. For exam- + ple: re> /(tang|tangerine|tan)/ data> yellow tangerine\D @@ -670,16 +720,16 @@ CALLOUTS tion is called during matching. This works with both matching func- tions. By default, the called function displays the callout number, the start and current positions in the text at the callout time, and the - next pattern item to be tested. For example, the output + next pattern item to be tested. For example: --->pqrabcdef 0 ^ ^ \d - indicates that callout number 0 occurred for a match attempt starting - at the fourth character of the subject string, when the pointer was at - the seventh character of the data, and when the next pattern item was - \d. Just one circumflex is output if the start and current positions - are the same. + This output indicates that callout number 0 occurred for a match + attempt starting at the fourth character of the subject string, when + the pointer was at the seventh character of the data, and when the next + pattern item was \d. Just one circumflex is output if the start and + current positions are the same. Callouts numbered 255 are assumed to be automatic callouts, inserted as a result of the /C pattern modifier. In this case, instead of showing @@ -779,26 +829,35 @@ SAVING AND RELOADING COMPILED PATTERNS You can copy a file written by pcretest to a different host and reload it there, even if the new host has opposite endianness to the one on which the pattern was compiled. For example, you can compile on an i86 - machine and run on a SPARC machine. + machine and run on a SPARC machine. When a pattern is reloaded on a + host with different endianness, the confirmation message is changed to: - File names for saving and reloading can be absolute or relative, but - note that the shell facility of expanding a file name that starts with + Compiled pattern (byte-inverted) loaded from /some/file + + The test suite contains some saved pre-compiled patterns with different + endianness. These are reloaded using "