Annotation of embedaddon/pcre/pcre_internal.h, revision 1.1.1.5
1.1 misho 1: /*************************************************
2: * Perl-Compatible Regular Expressions *
3: *************************************************/
4:
5:
6: /* PCRE is a library of functions to support regular expressions whose syntax
7: and semantics are as close as possible to those of the Perl 5 language.
8:
9: Written by Philip Hazel
1.1.1.4 misho 10: Copyright (c) 1997-2013 University of Cambridge
1.1 misho 11:
12: -----------------------------------------------------------------------------
13: Redistribution and use in source and binary forms, with or without
14: modification, are permitted provided that the following conditions are met:
15:
16: * Redistributions of source code must retain the above copyright notice,
17: this list of conditions and the following disclaimer.
18:
19: * Redistributions in binary form must reproduce the above copyright
20: notice, this list of conditions and the following disclaimer in the
21: documentation and/or other materials provided with the distribution.
22:
23: * Neither the name of the University of Cambridge nor the names of its
24: contributors may be used to endorse or promote products derived from
25: this software without specific prior written permission.
26:
27: THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
28: AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
29: IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
30: ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
31: LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
32: CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
33: SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
34: INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
35: CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
36: ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37: POSSIBILITY OF SUCH DAMAGE.
38: -----------------------------------------------------------------------------
39: */
40:
41: /* This header contains definitions that are shared between the different
42: modules, but which are not relevant to the exported API. This includes some
1.1.1.4 misho 43: functions whose names all begin with "_pcre_", "_pcre16_" or "_pcre32_"
44: depending on the PRIV macro. */
1.1 misho 45:
46: #ifndef PCRE_INTERNAL_H
47: #define PCRE_INTERNAL_H
48:
49: /* Define PCRE_DEBUG to get debugging output on stdout. */
50:
51: #if 0
52: #define PCRE_DEBUG
53: #endif
54:
1.1.1.2 misho 55: /* PCRE is compiled as an 8 bit library if it is not requested otherwise. */
1.1.1.4 misho 56:
57: #if !defined COMPILE_PCRE16 && !defined COMPILE_PCRE32
1.1.1.2 misho 58: #define COMPILE_PCRE8
1.1 misho 59: #endif
60:
1.1.1.2 misho 61: /* If SUPPORT_UCP is defined, SUPPORT_UTF must also be defined. The
1.1 misho 62: "configure" script ensures this, but not everybody uses "configure". */
63:
1.1.1.2 misho 64: #if defined SUPPORT_UCP && !(defined SUPPORT_UTF)
65: #define SUPPORT_UTF 1
66: #endif
67:
68: /* We define SUPPORT_UTF if SUPPORT_UTF8 is enabled for compatibility
69: reasons with existing code. */
70:
71: #if defined SUPPORT_UTF8 && !(defined SUPPORT_UTF)
72: #define SUPPORT_UTF 1
73: #endif
74:
75: /* Fixme: SUPPORT_UTF8 should be eventually disappear from the code.
76: Until then we define it if SUPPORT_UTF is defined. */
77:
78: #if defined SUPPORT_UTF && !(defined SUPPORT_UTF8)
1.1 misho 79: #define SUPPORT_UTF8 1
80: #endif
81:
1.1.1.4 misho 82: /* We do not support both EBCDIC and UTF-8/16/32 at the same time. The "configure"
1.1.1.2 misho 83: script prevents both being selected, but not everybody uses "configure". */
84:
85: #if defined EBCDIC && defined SUPPORT_UTF
1.1.1.4 misho 86: #error The use of both EBCDIC and SUPPORT_UTF is not supported.
1.1.1.2 misho 87: #endif
88:
1.1 misho 89: /* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef
90: inline, and there are *still* stupid compilers about that don't like indented
91: pre-processor statements, or at least there were when I first wrote this. After
92: all, it had only been about 10 years then...
93:
94: It turns out that the Mac Debugging.h header also defines the macro DPRINTF, so
95: be absolutely sure we get our version. */
96:
97: #undef DPRINTF
98: #ifdef PCRE_DEBUG
99: #define DPRINTF(p) printf p
100: #else
101: #define DPRINTF(p) /* Nothing */
102: #endif
103:
104:
105: /* Standard C headers plus the external interface definition. The only time
106: setjmp and stdarg are used is when NO_RECURSE is set. */
107:
108: #include <ctype.h>
109: #include <limits.h>
110: #include <stddef.h>
111: #include <stdio.h>
112: #include <stdlib.h>
113: #include <string.h>
114:
1.1.1.4 misho 115: /* Valgrind (memcheck) support */
116:
117: #ifdef SUPPORT_VALGRIND
118: #include <valgrind/memcheck.h>
119: #endif
120:
1.1 misho 121: /* When compiling a DLL for Windows, the exported symbols have to be declared
122: using some MS magic. I found some useful information on this web page:
123: http://msdn2.microsoft.com/en-us/library/y4h7bcy6(VS.80).aspx. According to the
124: information there, using __declspec(dllexport) without "extern" we have a
125: definition; with "extern" we have a declaration. The settings here override the
126: setting in pcre.h (which is included below); it defines only PCRE_EXP_DECL,
127: which is all that is needed for applications (they just import the symbols). We
128: use:
129:
130: PCRE_EXP_DECL for declarations
131: PCRE_EXP_DEFN for definitions of exported functions
132: PCRE_EXP_DATA_DEFN for definitions of exported variables
133:
134: The reason for the two DEFN macros is that in non-Windows environments, one
135: does not want to have "extern" before variable definitions because it leads to
136: compiler warnings. So we distinguish between functions and variables. In
137: Windows, the two should always be the same.
138:
139: The reason for wrapping this in #ifndef PCRE_EXP_DECL is so that pcretest,
140: which is an application, but needs to import this file in order to "peek" at
141: internals, can #include pcre.h first to get an application's-eye view.
142:
143: In principle, people compiling for non-Windows, non-Unix-like (i.e. uncommon,
144: special-purpose environments) might want to stick other stuff in front of
145: exported symbols. That's why, in the non-Windows case, we set PCRE_EXP_DEFN and
146: PCRE_EXP_DATA_DEFN only if they are not already set. */
147:
148: #ifndef PCRE_EXP_DECL
149: # ifdef _WIN32
150: # ifndef PCRE_STATIC
151: # define PCRE_EXP_DECL extern __declspec(dllexport)
152: # define PCRE_EXP_DEFN __declspec(dllexport)
153: # define PCRE_EXP_DATA_DEFN __declspec(dllexport)
154: # else
155: # define PCRE_EXP_DECL extern
156: # define PCRE_EXP_DEFN
157: # define PCRE_EXP_DATA_DEFN
158: # endif
159: # else
160: # ifdef __cplusplus
161: # define PCRE_EXP_DECL extern "C"
162: # else
163: # define PCRE_EXP_DECL extern
164: # endif
165: # ifndef PCRE_EXP_DEFN
166: # define PCRE_EXP_DEFN PCRE_EXP_DECL
167: # endif
168: # ifndef PCRE_EXP_DATA_DEFN
169: # define PCRE_EXP_DATA_DEFN
170: # endif
171: # endif
172: #endif
173:
174: /* When compiling with the MSVC compiler, it is sometimes necessary to include
175: a "calling convention" before exported function names. (This is secondhand
176: information; I know nothing about MSVC myself). For example, something like
177:
178: void __cdecl function(....)
179:
180: might be needed. In order so make this easy, all the exported functions have
181: PCRE_CALL_CONVENTION just before their names. It is rarely needed; if not
182: set, we ensure here that it has no effect. */
183:
184: #ifndef PCRE_CALL_CONVENTION
185: #define PCRE_CALL_CONVENTION
186: #endif
187:
1.1.1.2 misho 188: /* We need to have types that specify unsigned 8, 16 and 32-bit integers. We
1.1 misho 189: cannot determine these outside the compilation (e.g. by running a program as
190: part of "configure") because PCRE is often cross-compiled for use on other
191: systems. Instead we make use of the maximum sizes that are available at
192: preprocessor time in standard C environments. */
193:
1.1.1.2 misho 194: typedef unsigned char pcre_uint8;
195:
1.1 misho 196: #if USHRT_MAX == 65535
1.1.1.4 misho 197: typedef unsigned short pcre_uint16;
198: typedef short pcre_int16;
199: #define PCRE_UINT16_MAX USHRT_MAX
200: #define PCRE_INT16_MAX SHRT_MAX
1.1 misho 201: #elif UINT_MAX == 65535
1.1.1.4 misho 202: typedef unsigned int pcre_uint16;
203: typedef int pcre_int16;
204: #define PCRE_UINT16_MAX UINT_MAX
205: #define PCRE_INT16_MAX INT_MAX
1.1 misho 206: #else
1.1.1.4 misho 207: #error Cannot determine a type for 16-bit integers
1.1 misho 208: #endif
209:
1.1.1.4 misho 210: #if UINT_MAX == 4294967295U
211: typedef unsigned int pcre_uint32;
212: typedef int pcre_int32;
213: #define PCRE_UINT32_MAX UINT_MAX
214: #define PCRE_INT32_MAX INT_MAX
215: #elif ULONG_MAX == 4294967295UL
216: typedef unsigned long int pcre_uint32;
217: typedef long int pcre_int32;
218: #define PCRE_UINT32_MAX ULONG_MAX
219: #define PCRE_INT32_MAX LONG_MAX
1.1 misho 220: #else
1.1.1.4 misho 221: #error Cannot determine a type for 32-bit integers
1.1 misho 222: #endif
223:
224: /* When checking for integer overflow in pcre_compile(), we need to handle
225: large integers. If a 64-bit integer type is available, we can use that.
226: Otherwise we have to cast to double, which of course requires floating point
227: arithmetic. Handle this by defining a macro for the appropriate type. If
228: stdint.h is available, include it; it may define INT64_MAX. Systems that do not
229: have stdint.h (e.g. Solaris) may have inttypes.h. The macro int64_t may be set
230: by "configure". */
231:
1.1.1.4 misho 232: #if defined HAVE_STDINT_H
1.1 misho 233: #include <stdint.h>
1.1.1.4 misho 234: #elif defined HAVE_INTTYPES_H
1.1 misho 235: #include <inttypes.h>
236: #endif
237:
238: #if defined INT64_MAX || defined int64_t
239: #define INT64_OR_DOUBLE int64_t
240: #else
241: #define INT64_OR_DOUBLE double
242: #endif
243:
244: /* All character handling must be done as unsigned characters. Otherwise there
245: are problems with top-bit-set characters and functions such as isspace().
1.1.1.2 misho 246: However, we leave the interface to the outside world as char * or short *,
247: because that should make things easier for callers. This character type is
248: called pcre_uchar.
249:
250: The IN_UCHARS macro multiply its argument with the byte size of the current
251: pcre_uchar type. Useful for memcpy and such operations, whose require the
252: byte size of their input/output buffers.
253:
254: The MAX_255 macro checks whether its pcre_uchar input is less than 256.
255:
256: The TABLE_GET macro is designed for accessing elements of tables whose contain
257: exactly 256 items. When the character is able to contain more than 256
258: items, some check is needed before accessing these tables.
259: */
260:
1.1.1.4 misho 261: #if defined COMPILE_PCRE8
1.1 misho 262:
1.1.1.2 misho 263: typedef unsigned char pcre_uchar;
264: #define IN_UCHARS(x) (x)
265: #define MAX_255(c) 1
266: #define TABLE_GET(c, table, default) ((table)[c])
267:
1.1.1.4 misho 268: #elif defined COMPILE_PCRE16
1.1.1.2 misho 269:
270: #if USHRT_MAX != 65535
271: /* This is a warning message. Change PCRE_UCHAR16 to a 16 bit data type in
272: pcre.h(.in) and disable (comment out) this message. */
273: #error Warning: PCRE_UCHAR16 is not a 16 bit data type.
274: #endif
275:
276: typedef pcre_uint16 pcre_uchar;
1.1.1.4 misho 277: #define UCHAR_SHIFT (1)
278: #define IN_UCHARS(x) ((x) << UCHAR_SHIFT)
279: #define MAX_255(c) ((c) <= 255u)
280: #define TABLE_GET(c, table, default) (MAX_255(c)? ((table)[c]):(default))
281:
282: #elif defined COMPILE_PCRE32
283:
284: typedef pcre_uint32 pcre_uchar;
285: #define UCHAR_SHIFT (2)
286: #define IN_UCHARS(x) ((x) << UCHAR_SHIFT)
1.1.1.2 misho 287: #define MAX_255(c) ((c) <= 255u)
288: #define TABLE_GET(c, table, default) (MAX_255(c)? ((table)[c]):(default))
289:
290: #else
291: #error Unsupported compiling mode
1.1.1.4 misho 292: #endif /* COMPILE_PCRE[8|16|32] */
1.1 misho 293:
294: /* This is an unsigned int value that no character can ever have. UTF-8
295: characters only go up to 0x7fffffff (though Unicode doesn't go beyond
296: 0x0010ffff). */
297:
298: #define NOTACHAR 0xffffffff
299:
300: /* PCRE is able to support several different kinds of newline (CR, LF, CRLF,
301: "any" and "anycrlf" at present). The following macros are used to package up
302: testing for newlines. NLBLOCK, PSSTART, and PSEND are defined in the various
303: modules to indicate in which datablock the parameters exist, and what the
304: start/end of string field names are. */
305:
306: #define NLTYPE_FIXED 0 /* Newline is a fixed length string */
307: #define NLTYPE_ANY 1 /* Newline is any Unicode line ending */
308: #define NLTYPE_ANYCRLF 2 /* Newline is CR, LF, or CRLF */
309:
310: /* This macro checks for a newline at the given position */
311:
312: #define IS_NEWLINE(p) \
313: ((NLBLOCK->nltype != NLTYPE_FIXED)? \
314: ((p) < NLBLOCK->PSEND && \
1.1.1.2 misho 315: PRIV(is_newline)((p), NLBLOCK->nltype, NLBLOCK->PSEND, \
316: &(NLBLOCK->nllen), utf)) \
1.1 misho 317: : \
318: ((p) <= NLBLOCK->PSEND - NLBLOCK->nllen && \
1.1.1.4 misho 319: RAWUCHARTEST(p) == NLBLOCK->nl[0] && \
320: (NLBLOCK->nllen == 1 || RAWUCHARTEST(p+1) == NLBLOCK->nl[1]) \
1.1 misho 321: ) \
322: )
323:
324: /* This macro checks for a newline immediately preceding the given position */
325:
326: #define WAS_NEWLINE(p) \
327: ((NLBLOCK->nltype != NLTYPE_FIXED)? \
328: ((p) > NLBLOCK->PSSTART && \
1.1.1.2 misho 329: PRIV(was_newline)((p), NLBLOCK->nltype, NLBLOCK->PSSTART, \
330: &(NLBLOCK->nllen), utf)) \
1.1 misho 331: : \
332: ((p) >= NLBLOCK->PSSTART + NLBLOCK->nllen && \
1.1.1.4 misho 333: RAWUCHARTEST(p - NLBLOCK->nllen) == NLBLOCK->nl[0] && \
334: (NLBLOCK->nllen == 1 || RAWUCHARTEST(p - NLBLOCK->nllen + 1) == NLBLOCK->nl[1]) \
1.1 misho 335: ) \
336: )
337:
338: /* When PCRE is compiled as a C++ library, the subject pointer can be replaced
339: with a custom type. This makes it possible, for example, to allow pcre_exec()
340: to process subject strings that are discontinuous by using a smart pointer
341: class. It must always be possible to inspect all of the subject string in
342: pcre_exec() because of the way it backtracks. Two macros are required in the
343: normal case, for sign-unspecified and unsigned char pointers. The former is
344: used for the external interface and appears in pcre.h, which is why its name
345: must begin with PCRE_. */
346:
347: #ifdef CUSTOM_SUBJECT_PTR
1.1.1.2 misho 348: #define PCRE_PUCHAR CUSTOM_SUBJECT_PTR
1.1 misho 349: #else
1.1.1.2 misho 350: #define PCRE_PUCHAR const pcre_uchar *
1.1 misho 351: #endif
352:
353: /* Include the public PCRE header and the definitions of UCP character property
354: values. */
355:
356: #include "pcre.h"
357: #include "ucp.h"
358:
1.1.1.4 misho 359: #ifdef COMPILE_PCRE32
360: /* Assert that the public PCRE_UCHAR32 is a 32-bit type */
361: typedef int __assert_pcre_uchar32_size[sizeof(PCRE_UCHAR32) == 4 ? 1 : -1];
362: #endif
363:
1.1 misho 364: /* When compiling for use with the Virtual Pascal compiler, these functions
365: need to have their names changed. PCRE must be compiled with the -DVPCOMPAT
366: option on the command line. */
367:
368: #ifdef VPCOMPAT
369: #define strlen(s) _strlen(s)
370: #define strncmp(s1,s2,m) _strncmp(s1,s2,m)
371: #define memcmp(s,c,n) _memcmp(s,c,n)
372: #define memcpy(d,s,n) _memcpy(d,s,n)
373: #define memmove(d,s,n) _memmove(d,s,n)
374: #define memset(s,c,n) _memset(s,c,n)
375: #else /* VPCOMPAT */
376:
377: /* To cope with SunOS4 and other systems that lack memmove() but have bcopy(),
378: define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY
379: is set. Otherwise, include an emulating function for those systems that have
380: neither (there some non-Unix environments where this is the case). */
381:
382: #ifndef HAVE_MEMMOVE
383: #undef memmove /* some systems may have a macro */
384: #ifdef HAVE_BCOPY
385: #define memmove(a, b, c) bcopy(b, a, c)
386: #else /* HAVE_BCOPY */
387: static void *
388: pcre_memmove(void *d, const void *s, size_t n)
389: {
390: size_t i;
391: unsigned char *dest = (unsigned char *)d;
392: const unsigned char *src = (const unsigned char *)s;
393: if (dest > src)
394: {
395: dest += n;
396: src += n;
397: for (i = 0; i < n; ++i) *(--dest) = *(--src);
398: return (void *)dest;
399: }
400: else
401: {
402: for (i = 0; i < n; ++i) *dest++ = *src++;
403: return (void *)(dest - n);
404: }
405: }
406: #define memmove(a, b, c) pcre_memmove(a, b, c)
407: #endif /* not HAVE_BCOPY */
408: #endif /* not HAVE_MEMMOVE */
409: #endif /* not VPCOMPAT */
410:
411:
412: /* PCRE keeps offsets in its compiled code as 2-byte quantities (always stored
413: in big-endian order) by default. These are used, for example, to link from the
414: start of a subpattern to its alternatives and its end. The use of 2 bytes per
415: offset limits the size of the compiled regex to around 64K, which is big enough
416: for almost everybody. However, I received a request for an even bigger limit.
417: For this reason, and also to make the code easier to maintain, the storing and
418: loading of offsets from the byte string is now handled by the macros that are
419: defined here.
420:
421: The macros are controlled by the value of LINK_SIZE. This defaults to 2 in
422: the config.h file, but can be overridden by using -D on the command line. This
423: is automated on Unix systems via the "configure" command. */
424:
1.1.1.4 misho 425: #if defined COMPILE_PCRE8
1.1.1.2 misho 426:
1.1 misho 427: #if LINK_SIZE == 2
428:
429: #define PUT(a,n,d) \
430: (a[n] = (d) >> 8), \
431: (a[(n)+1] = (d) & 255)
432:
433: #define GET(a,n) \
434: (((a)[n] << 8) | (a)[(n)+1])
435:
436: #define MAX_PATTERN_SIZE (1 << 16)
437:
438:
439: #elif LINK_SIZE == 3
440:
441: #define PUT(a,n,d) \
442: (a[n] = (d) >> 16), \
443: (a[(n)+1] = (d) >> 8), \
444: (a[(n)+2] = (d) & 255)
445:
446: #define GET(a,n) \
447: (((a)[n] << 16) | ((a)[(n)+1] << 8) | (a)[(n)+2])
448:
449: #define MAX_PATTERN_SIZE (1 << 24)
450:
451:
452: #elif LINK_SIZE == 4
453:
454: #define PUT(a,n,d) \
455: (a[n] = (d) >> 24), \
456: (a[(n)+1] = (d) >> 16), \
457: (a[(n)+2] = (d) >> 8), \
458: (a[(n)+3] = (d) & 255)
459:
460: #define GET(a,n) \
461: (((a)[n] << 24) | ((a)[(n)+1] << 16) | ((a)[(n)+2] << 8) | (a)[(n)+3])
462:
1.1.1.2 misho 463: /* Keep it positive */
464: #define MAX_PATTERN_SIZE (1 << 30)
465:
466: #else
467: #error LINK_SIZE must be either 2, 3, or 4
468: #endif
469:
1.1.1.4 misho 470: #elif defined COMPILE_PCRE16
1.1.1.2 misho 471:
472: #if LINK_SIZE == 2
473:
1.1.1.4 misho 474: /* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */
1.1.1.2 misho 475: #undef LINK_SIZE
476: #define LINK_SIZE 1
477:
478: #define PUT(a,n,d) \
479: (a[n] = (d))
480:
481: #define GET(a,n) \
482: (a[n])
483:
484: #define MAX_PATTERN_SIZE (1 << 16)
485:
486: #elif LINK_SIZE == 3 || LINK_SIZE == 4
487:
1.1.1.4 misho 488: /* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */
1.1.1.2 misho 489: #undef LINK_SIZE
490: #define LINK_SIZE 2
491:
492: #define PUT(a,n,d) \
493: (a[n] = (d) >> 16), \
494: (a[(n)+1] = (d) & 65535)
495:
496: #define GET(a,n) \
497: (((a)[n] << 16) | (a)[(n)+1])
1.1 misho 498:
1.1.1.2 misho 499: /* Keep it positive */
500: #define MAX_PATTERN_SIZE (1 << 30)
1.1 misho 501:
502: #else
503: #error LINK_SIZE must be either 2, 3, or 4
504: #endif
505:
1.1.1.4 misho 506: #elif defined COMPILE_PCRE32
507:
508: /* Only supported LINK_SIZE is 4 */
509: /* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */
510: #undef LINK_SIZE
511: #define LINK_SIZE 1
512:
513: #define PUT(a,n,d) \
514: (a[n] = (d))
515:
516: #define GET(a,n) \
517: (a[n])
518:
519: /* Keep it positive */
520: #define MAX_PATTERN_SIZE (1 << 30)
521:
1.1.1.2 misho 522: #else
523: #error Unsupported compiling mode
1.1.1.4 misho 524: #endif /* COMPILE_PCRE[8|16|32] */
1.1 misho 525:
526: /* Convenience macro defined in terms of the others */
527:
528: #define PUTINC(a,n,d) PUT(a,n,d), a += LINK_SIZE
529:
530:
531: /* PCRE uses some other 2-byte quantities that do not change when the size of
532: offsets changes. There are used for repeat counts and for other things such as
533: capturing parenthesis numbers in back references. */
534:
1.1.1.4 misho 535: #if defined COMPILE_PCRE8
1.1.1.2 misho 536:
537: #define IMM2_SIZE 2
538:
1.1 misho 539: #define PUT2(a,n,d) \
540: a[n] = (d) >> 8; \
541: a[(n)+1] = (d) & 255
542:
1.1.1.4 misho 543: /* For reasons that I do not understand, the expression in this GET2 macro is
544: treated by gcc as a signed expression, even when a is declared as unsigned. It
545: seems that any kind of arithmetic results in a signed value. */
546:
1.1 misho 547: #define GET2(a,n) \
1.1.1.4 misho 548: (unsigned int)(((a)[n] << 8) | (a)[(n)+1])
1.1 misho 549:
1.1.1.4 misho 550: #elif defined COMPILE_PCRE16
1.1 misho 551:
1.1.1.4 misho 552: #define IMM2_SIZE 1
553:
554: #define PUT2(a,n,d) \
555: a[n] = d
556:
557: #define GET2(a,n) \
558: a[n]
559:
560: #elif defined COMPILE_PCRE32
1.1 misho 561:
1.1.1.2 misho 562: #define IMM2_SIZE 1
1.1 misho 563:
1.1.1.2 misho 564: #define PUT2(a,n,d) \
565: a[n] = d
566:
567: #define GET2(a,n) \
568: a[n]
569:
570: #else
571: #error Unsupported compiling mode
1.1.1.4 misho 572: #endif /* COMPILE_PCRE[8|16|32] */
1.1.1.2 misho 573:
574: #define PUT2INC(a,n,d) PUT2(a,n,d), a += IMM2_SIZE
575:
1.1.1.3 misho 576: /* The maximum length of a MARK name is currently one data unit; it may be
577: changed in future to be a fixed number of bytes or to depend on LINK_SIZE. */
578:
1.1.1.4 misho 579: #if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
580: #define MAX_MARK ((1u << 16) - 1)
581: #else
582: #define MAX_MARK ((1u << 8) - 1)
583: #endif
1.1.1.3 misho 584:
1.1.1.2 misho 585: /* When UTF encoding is being used, a character is no longer just a single
1.1.1.4 misho 586: byte. The macros for character handling generate simple sequences when used in
587: character-mode, and more complicated ones for UTF characters. GETCHARLENTEST
588: and other macros are not used when UTF is not supported, so they are not
589: defined. To make sure they can never even appear when UTF support is omitted,
590: we don't even define them. */
1.1.1.2 misho 591:
592: #ifndef SUPPORT_UTF
593:
594: /* #define MAX_VALUE_FOR_SINGLE_CHAR */
595: /* #define HAS_EXTRALEN(c) */
596: /* #define GET_EXTRALEN(c) */
597: /* #define NOT_FIRSTCHAR(c) */
1.1 misho 598: #define GETCHAR(c, eptr) c = *eptr;
599: #define GETCHARTEST(c, eptr) c = *eptr;
600: #define GETCHARINC(c, eptr) c = *eptr++;
601: #define GETCHARINCTEST(c, eptr) c = *eptr++;
602: #define GETCHARLEN(c, eptr, len) c = *eptr;
1.1.1.4 misho 603: #define RAWUCHAR(eptr) (*(eptr))
604: #define RAWUCHARINC(eptr) (*(eptr)++)
605: #define RAWUCHARTEST(eptr) (*(eptr))
606: #define RAWUCHARINCTEST(eptr) (*(eptr)++)
1.1 misho 607: /* #define GETCHARLENTEST(c, eptr, len) */
608: /* #define BACKCHAR(eptr) */
1.1.1.2 misho 609: /* #define FORWARDCHAR(eptr) */
610: /* #define ACROSSCHAR(condition, eptr, action) */
1.1 misho 611:
1.1.1.2 misho 612: #else /* SUPPORT_UTF */
613:
614: /* Tests whether the code point needs extra characters to decode. */
615:
1.1.1.4 misho 616: #define HASUTF8EXTRALEN(c) ((c) >= 0xc0)
1.1.1.2 misho 617:
1.1 misho 618: /* Base macro to pick up the remaining bytes of a UTF-8 character, not
619: advancing the pointer. */
620:
621: #define GETUTF8(c, eptr) \
622: { \
623: if ((c & 0x20) == 0) \
624: c = ((c & 0x1f) << 6) | (eptr[1] & 0x3f); \
625: else if ((c & 0x10) == 0) \
626: c = ((c & 0x0f) << 12) | ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
627: else if ((c & 0x08) == 0) \
628: c = ((c & 0x07) << 18) | ((eptr[1] & 0x3f) << 12) | \
629: ((eptr[2] & 0x3f) << 6) | (eptr[3] & 0x3f); \
630: else if ((c & 0x04) == 0) \
631: c = ((c & 0x03) << 24) | ((eptr[1] & 0x3f) << 18) | \
632: ((eptr[2] & 0x3f) << 12) | ((eptr[3] & 0x3f) << 6) | \
633: (eptr[4] & 0x3f); \
634: else \
635: c = ((c & 0x01) << 30) | ((eptr[1] & 0x3f) << 24) | \
636: ((eptr[2] & 0x3f) << 18) | ((eptr[3] & 0x3f) << 12) | \
637: ((eptr[4] & 0x3f) << 6) | (eptr[5] & 0x3f); \
638: }
639:
640: /* Base macro to pick up the remaining bytes of a UTF-8 character, advancing
641: the pointer. */
642:
643: #define GETUTF8INC(c, eptr) \
644: { \
645: if ((c & 0x20) == 0) \
646: c = ((c & 0x1f) << 6) | (*eptr++ & 0x3f); \
647: else if ((c & 0x10) == 0) \
648: { \
649: c = ((c & 0x0f) << 12) | ((*eptr & 0x3f) << 6) | (eptr[1] & 0x3f); \
650: eptr += 2; \
651: } \
652: else if ((c & 0x08) == 0) \
653: { \
654: c = ((c & 0x07) << 18) | ((*eptr & 0x3f) << 12) | \
655: ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
656: eptr += 3; \
657: } \
658: else if ((c & 0x04) == 0) \
659: { \
660: c = ((c & 0x03) << 24) | ((*eptr & 0x3f) << 18) | \
661: ((eptr[1] & 0x3f) << 12) | ((eptr[2] & 0x3f) << 6) | \
662: (eptr[3] & 0x3f); \
663: eptr += 4; \
664: } \
665: else \
666: { \
667: c = ((c & 0x01) << 30) | ((*eptr & 0x3f) << 24) | \
668: ((eptr[1] & 0x3f) << 18) | ((eptr[2] & 0x3f) << 12) | \
669: ((eptr[3] & 0x3f) << 6) | (eptr[4] & 0x3f); \
670: eptr += 5; \
671: } \
672: }
673:
1.1.1.4 misho 674: #if defined COMPILE_PCRE8
675:
676: /* These macros were originally written in the form of loops that used data
677: from the tables whose names start with PRIV(utf8_table). They were rewritten by
678: a user so as not to use loops, because in some environments this gives a
679: significant performance advantage, and it seems never to do any harm. */
680:
681: /* Tells the biggest code point which can be encoded as a single character. */
682:
683: #define MAX_VALUE_FOR_SINGLE_CHAR 127
684:
685: /* Tests whether the code point needs extra characters to decode. */
686:
687: #define HAS_EXTRALEN(c) ((c) >= 0xc0)
688:
689: /* Returns with the additional number of characters if IS_MULTICHAR(c) is TRUE.
690: Otherwise it has an undefined behaviour. */
691:
692: #define GET_EXTRALEN(c) (PRIV(utf8_table4)[(c) & 0x3f])
693:
694: /* Returns TRUE, if the given character is not the first character
695: of a UTF sequence. */
696:
697: #define NOT_FIRSTCHAR(c) (((c) & 0xc0) == 0x80)
698:
699: /* Get the next UTF-8 character, not advancing the pointer. This is called when
700: we know we are in UTF-8 mode. */
701:
702: #define GETCHAR(c, eptr) \
703: c = *eptr; \
704: if (c >= 0xc0) GETUTF8(c, eptr);
705:
706: /* Get the next UTF-8 character, testing for UTF-8 mode, and not advancing the
707: pointer. */
708:
709: #define GETCHARTEST(c, eptr) \
710: c = *eptr; \
711: if (utf && c >= 0xc0) GETUTF8(c, eptr);
712:
1.1 misho 713: /* Get the next UTF-8 character, advancing the pointer. This is called when we
714: know we are in UTF-8 mode. */
715:
716: #define GETCHARINC(c, eptr) \
717: c = *eptr++; \
718: if (c >= 0xc0) GETUTF8INC(c, eptr);
719:
720: /* Get the next character, testing for UTF-8 mode, and advancing the pointer.
721: This is called when we don't know if we are in UTF-8 mode. */
722:
723: #define GETCHARINCTEST(c, eptr) \
724: c = *eptr++; \
1.1.1.2 misho 725: if (utf && c >= 0xc0) GETUTF8INC(c, eptr);
1.1 misho 726:
727: /* Base macro to pick up the remaining bytes of a UTF-8 character, not
728: advancing the pointer, incrementing the length. */
729:
730: #define GETUTF8LEN(c, eptr, len) \
731: { \
732: if ((c & 0x20) == 0) \
733: { \
734: c = ((c & 0x1f) << 6) | (eptr[1] & 0x3f); \
735: len++; \
736: } \
737: else if ((c & 0x10) == 0) \
738: { \
739: c = ((c & 0x0f) << 12) | ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
740: len += 2; \
741: } \
742: else if ((c & 0x08) == 0) \
743: {\
744: c = ((c & 0x07) << 18) | ((eptr[1] & 0x3f) << 12) | \
745: ((eptr[2] & 0x3f) << 6) | (eptr[3] & 0x3f); \
746: len += 3; \
747: } \
748: else if ((c & 0x04) == 0) \
749: { \
750: c = ((c & 0x03) << 24) | ((eptr[1] & 0x3f) << 18) | \
751: ((eptr[2] & 0x3f) << 12) | ((eptr[3] & 0x3f) << 6) | \
752: (eptr[4] & 0x3f); \
753: len += 4; \
754: } \
755: else \
756: {\
757: c = ((c & 0x01) << 30) | ((eptr[1] & 0x3f) << 24) | \
758: ((eptr[2] & 0x3f) << 18) | ((eptr[3] & 0x3f) << 12) | \
759: ((eptr[4] & 0x3f) << 6) | (eptr[5] & 0x3f); \
760: len += 5; \
761: } \
762: }
763:
764: /* Get the next UTF-8 character, not advancing the pointer, incrementing length
765: if there are extra bytes. This is called when we know we are in UTF-8 mode. */
766:
767: #define GETCHARLEN(c, eptr, len) \
768: c = *eptr; \
769: if (c >= 0xc0) GETUTF8LEN(c, eptr, len);
770:
771: /* Get the next UTF-8 character, testing for UTF-8 mode, not advancing the
772: pointer, incrementing length if there are extra bytes. This is called when we
773: do not know if we are in UTF-8 mode. */
774:
775: #define GETCHARLENTEST(c, eptr, len) \
776: c = *eptr; \
1.1.1.2 misho 777: if (utf && c >= 0xc0) GETUTF8LEN(c, eptr, len);
1.1 misho 778:
1.1.1.4 misho 779: /* Returns the next uchar, not advancing the pointer. This is called when
780: we know we are in UTF mode. */
781:
782: #define RAWUCHAR(eptr) \
783: (*(eptr))
784:
785: /* Returns the next uchar, advancing the pointer. This is called when
786: we know we are in UTF mode. */
787:
788: #define RAWUCHARINC(eptr) \
789: (*((eptr)++))
790:
791: /* Returns the next uchar, testing for UTF mode, and not advancing the
792: pointer. */
793:
794: #define RAWUCHARTEST(eptr) \
795: (*(eptr))
796:
797: /* Returns the next uchar, testing for UTF mode, advancing the
798: pointer. */
799:
800: #define RAWUCHARINCTEST(eptr) \
801: (*((eptr)++))
802:
1.1 misho 803: /* If the pointer is not at the start of a character, move it back until
804: it is. This is called only in UTF-8 mode - we don't put a test within the macro
805: because almost all calls are already within a block of UTF-8 only code. */
806:
807: #define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--
808:
1.1.1.2 misho 809: /* Same as above, just in the other direction. */
810: #define FORWARDCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr++
811:
812: /* Same as above, but it allows a fully customizable form. */
813: #define ACROSSCHAR(condition, eptr, action) \
814: while((condition) && ((eptr) & 0xc0) == 0x80) action
815:
1.1.1.4 misho 816: #elif defined COMPILE_PCRE16
1.1.1.2 misho 817:
818: /* Tells the biggest code point which can be encoded as a single character. */
819:
820: #define MAX_VALUE_FOR_SINGLE_CHAR 65535
821:
822: /* Tests whether the code point needs extra characters to decode. */
823:
824: #define HAS_EXTRALEN(c) (((c) & 0xfc00) == 0xd800)
825:
826: /* Returns with the additional number of characters if IS_MULTICHAR(c) is TRUE.
827: Otherwise it has an undefined behaviour. */
828:
829: #define GET_EXTRALEN(c) 1
830:
831: /* Returns TRUE, if the given character is not the first character
832: of a UTF sequence. */
833:
834: #define NOT_FIRSTCHAR(c) (((c) & 0xfc00) == 0xdc00)
835:
836: /* Base macro to pick up the low surrogate of a UTF-16 character, not
837: advancing the pointer. */
838:
839: #define GETUTF16(c, eptr) \
840: { c = (((c & 0x3ff) << 10) | (eptr[1] & 0x3ff)) + 0x10000; }
841:
842: /* Get the next UTF-16 character, not advancing the pointer. This is called when
843: we know we are in UTF-16 mode. */
844:
845: #define GETCHAR(c, eptr) \
846: c = *eptr; \
847: if ((c & 0xfc00) == 0xd800) GETUTF16(c, eptr);
848:
849: /* Get the next UTF-16 character, testing for UTF-16 mode, and not advancing the
850: pointer. */
851:
852: #define GETCHARTEST(c, eptr) \
853: c = *eptr; \
854: if (utf && (c & 0xfc00) == 0xd800) GETUTF16(c, eptr);
855:
856: /* Base macro to pick up the low surrogate of a UTF-16 character, advancing
857: the pointer. */
858:
859: #define GETUTF16INC(c, eptr) \
860: { c = (((c & 0x3ff) << 10) | (*eptr++ & 0x3ff)) + 0x10000; }
861:
862: /* Get the next UTF-16 character, advancing the pointer. This is called when we
863: know we are in UTF-16 mode. */
864:
865: #define GETCHARINC(c, eptr) \
866: c = *eptr++; \
867: if ((c & 0xfc00) == 0xd800) GETUTF16INC(c, eptr);
868:
869: /* Get the next character, testing for UTF-16 mode, and advancing the pointer.
870: This is called when we don't know if we are in UTF-16 mode. */
871:
872: #define GETCHARINCTEST(c, eptr) \
873: c = *eptr++; \
874: if (utf && (c & 0xfc00) == 0xd800) GETUTF16INC(c, eptr);
875:
876: /* Base macro to pick up the low surrogate of a UTF-16 character, not
877: advancing the pointer, incrementing the length. */
878:
879: #define GETUTF16LEN(c, eptr, len) \
880: { c = (((c & 0x3ff) << 10) | (eptr[1] & 0x3ff)) + 0x10000; len++; }
881:
882: /* Get the next UTF-16 character, not advancing the pointer, incrementing
883: length if there is a low surrogate. This is called when we know we are in
884: UTF-16 mode. */
885:
886: #define GETCHARLEN(c, eptr, len) \
887: c = *eptr; \
888: if ((c & 0xfc00) == 0xd800) GETUTF16LEN(c, eptr, len);
889:
890: /* Get the next UTF-816character, testing for UTF-16 mode, not advancing the
891: pointer, incrementing length if there is a low surrogate. This is called when
892: we do not know if we are in UTF-16 mode. */
893:
894: #define GETCHARLENTEST(c, eptr, len) \
895: c = *eptr; \
896: if (utf && (c & 0xfc00) == 0xd800) GETUTF16LEN(c, eptr, len);
897:
1.1.1.4 misho 898: /* Returns the next uchar, not advancing the pointer. This is called when
899: we know we are in UTF mode. */
900:
901: #define RAWUCHAR(eptr) \
902: (*(eptr))
903:
904: /* Returns the next uchar, advancing the pointer. This is called when
905: we know we are in UTF mode. */
906:
907: #define RAWUCHARINC(eptr) \
908: (*((eptr)++))
909:
910: /* Returns the next uchar, testing for UTF mode, and not advancing the
911: pointer. */
912:
913: #define RAWUCHARTEST(eptr) \
914: (*(eptr))
915:
916: /* Returns the next uchar, testing for UTF mode, advancing the
917: pointer. */
918:
919: #define RAWUCHARINCTEST(eptr) \
920: (*((eptr)++))
921:
1.1.1.2 misho 922: /* If the pointer is not at the start of a character, move it back until
923: it is. This is called only in UTF-16 mode - we don't put a test within the
924: macro because almost all calls are already within a block of UTF-16 only
925: code. */
926:
927: #define BACKCHAR(eptr) if ((*eptr & 0xfc00) == 0xdc00) eptr--
928:
929: /* Same as above, just in the other direction. */
930: #define FORWARDCHAR(eptr) if ((*eptr & 0xfc00) == 0xdc00) eptr++
931:
932: /* Same as above, but it allows a fully customizable form. */
933: #define ACROSSCHAR(condition, eptr, action) \
934: if ((condition) && ((eptr) & 0xfc00) == 0xdc00) action
935:
1.1.1.4 misho 936: #elif defined COMPILE_PCRE32
1.1.1.2 misho 937:
1.1.1.4 misho 938: /* These are trivial for the 32-bit library, since all UTF-32 characters fit
939: into one pcre_uchar unit. */
940: #define MAX_VALUE_FOR_SINGLE_CHAR (0x10ffffu)
941: #define HAS_EXTRALEN(c) (0)
942: #define GET_EXTRALEN(c) (0)
943: #define NOT_FIRSTCHAR(c) (0)
944:
945: /* Get the next UTF-32 character, not advancing the pointer. This is called when
946: we know we are in UTF-32 mode. */
947:
948: #define GETCHAR(c, eptr) \
949: c = *(eptr);
950:
951: /* Get the next UTF-32 character, testing for UTF-32 mode, and not advancing the
952: pointer. */
953:
954: #define GETCHARTEST(c, eptr) \
955: c = *(eptr);
956:
957: /* Get the next UTF-32 character, advancing the pointer. This is called when we
958: know we are in UTF-32 mode. */
959:
960: #define GETCHARINC(c, eptr) \
961: c = *((eptr)++);
962:
963: /* Get the next character, testing for UTF-32 mode, and advancing the pointer.
964: This is called when we don't know if we are in UTF-32 mode. */
965:
966: #define GETCHARINCTEST(c, eptr) \
967: c = *((eptr)++);
968:
969: /* Get the next UTF-32 character, not advancing the pointer, not incrementing
970: length (since all UTF-32 is of length 1). This is called when we know we are in
971: UTF-32 mode. */
972:
973: #define GETCHARLEN(c, eptr, len) \
974: GETCHAR(c, eptr)
975:
976: /* Get the next UTF-32character, testing for UTF-32 mode, not advancing the
977: pointer, not incrementing the length (since all UTF-32 is of length 1).
978: This is called when we do not know if we are in UTF-32 mode. */
979:
980: #define GETCHARLENTEST(c, eptr, len) \
981: GETCHARTEST(c, eptr)
982:
983: /* Returns the next uchar, not advancing the pointer. This is called when
984: we know we are in UTF mode. */
985:
986: #define RAWUCHAR(eptr) \
987: (*(eptr))
988:
989: /* Returns the next uchar, advancing the pointer. This is called when
990: we know we are in UTF mode. */
991:
992: #define RAWUCHARINC(eptr) \
993: (*((eptr)++))
994:
995: /* Returns the next uchar, testing for UTF mode, and not advancing the
996: pointer. */
997:
998: #define RAWUCHARTEST(eptr) \
999: (*(eptr))
1000:
1001: /* Returns the next uchar, testing for UTF mode, advancing the
1002: pointer. */
1003:
1004: #define RAWUCHARINCTEST(eptr) \
1005: (*((eptr)++))
1006:
1007: /* If the pointer is not at the start of a character, move it back until
1008: it is. This is called only in UTF-32 mode - we don't put a test within the
1009: macro because almost all calls are already within a block of UTF-32 only
1010: code.
1011: These are all no-ops since all UTF-32 characters fit into one pcre_uchar. */
1012:
1013: #define BACKCHAR(eptr) do { } while (0)
1014:
1015: /* Same as above, just in the other direction. */
1016: #define FORWARDCHAR(eptr) do { } while (0)
1017:
1018: /* Same as above, but it allows a fully customizable form. */
1019: #define ACROSSCHAR(condition, eptr, action) do { } while (0)
1020:
1021: #else
1022: #error Unsupported compiling mode
1023: #endif /* COMPILE_PCRE[8|16|32] */
1.1.1.2 misho 1024:
1025: #endif /* SUPPORT_UTF */
1.1 misho 1026:
1.1.1.4 misho 1027: /* Tests for Unicode horizontal and vertical whitespace characters must check a
1028: number of different values. Using a switch statement for this generates the
1029: fastest code (no loop, no memory access), and there are several places in the
1030: interpreter code where this happens. In order to ensure that all the case lists
1031: remain in step, we use macros so that there is only one place where the lists
1032: are defined.
1033:
1034: These values are also required as lists in pcre_compile.c when processing \h,
1035: \H, \v and \V in a character class. The lists are defined in pcre_tables.c, but
1036: macros that define the values are here so that all the definitions are
1037: together. The lists must be in ascending character order, terminated by
1038: NOTACHAR (which is 0xffffffff).
1039:
1040: Any changes should ensure that the various macros are kept in step with each
1041: other. NOTE: The values also appear in pcre_jit_compile.c. */
1042:
1043: /* ------ ASCII/Unicode environments ------ */
1044:
1045: #ifndef EBCDIC
1046:
1047: #define HSPACE_LIST \
1048: CHAR_HT, CHAR_SPACE, 0xa0, \
1049: 0x1680, 0x180e, 0x2000, 0x2001, 0x2002, 0x2003, 0x2004, 0x2005, \
1050: 0x2006, 0x2007, 0x2008, 0x2009, 0x200A, 0x202f, 0x205f, 0x3000, \
1051: NOTACHAR
1052:
1053: #define HSPACE_MULTIBYTE_CASES \
1054: case 0x1680: /* OGHAM SPACE MARK */ \
1055: case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ \
1056: case 0x2000: /* EN QUAD */ \
1057: case 0x2001: /* EM QUAD */ \
1058: case 0x2002: /* EN SPACE */ \
1059: case 0x2003: /* EM SPACE */ \
1060: case 0x2004: /* THREE-PER-EM SPACE */ \
1061: case 0x2005: /* FOUR-PER-EM SPACE */ \
1062: case 0x2006: /* SIX-PER-EM SPACE */ \
1063: case 0x2007: /* FIGURE SPACE */ \
1064: case 0x2008: /* PUNCTUATION SPACE */ \
1065: case 0x2009: /* THIN SPACE */ \
1066: case 0x200A: /* HAIR SPACE */ \
1067: case 0x202f: /* NARROW NO-BREAK SPACE */ \
1068: case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ \
1069: case 0x3000 /* IDEOGRAPHIC SPACE */
1070:
1071: #define HSPACE_BYTE_CASES \
1072: case CHAR_HT: \
1073: case CHAR_SPACE: \
1074: case 0xa0 /* NBSP */
1075:
1076: #define HSPACE_CASES \
1077: HSPACE_BYTE_CASES: \
1078: HSPACE_MULTIBYTE_CASES
1079:
1080: #define VSPACE_LIST \
1081: CHAR_LF, CHAR_VT, CHAR_FF, CHAR_CR, CHAR_NEL, 0x2028, 0x2029, NOTACHAR
1082:
1083: #define VSPACE_MULTIBYTE_CASES \
1084: case 0x2028: /* LINE SEPARATOR */ \
1085: case 0x2029 /* PARAGRAPH SEPARATOR */
1086:
1087: #define VSPACE_BYTE_CASES \
1088: case CHAR_LF: \
1089: case CHAR_VT: \
1090: case CHAR_FF: \
1091: case CHAR_CR: \
1092: case CHAR_NEL
1093:
1094: #define VSPACE_CASES \
1095: VSPACE_BYTE_CASES: \
1096: VSPACE_MULTIBYTE_CASES
1.1 misho 1097:
1.1.1.4 misho 1098: /* ------ EBCDIC environments ------ */
1.1 misho 1099:
1.1.1.4 misho 1100: #else
1101: #define HSPACE_LIST CHAR_HT, CHAR_SPACE
1102:
1103: #define HSPACE_BYTE_CASES \
1104: case CHAR_HT: \
1105: case CHAR_SPACE
1106:
1107: #define HSPACE_CASES HSPACE_BYTE_CASES
1108:
1109: #ifdef EBCDIC_NL25
1110: #define VSPACE_LIST \
1111: CHAR_VT, CHAR_FF, CHAR_CR, CHAR_NEL, CHAR_LF, NOTACHAR
1112: #else
1113: #define VSPACE_LIST \
1114: CHAR_VT, CHAR_FF, CHAR_CR, CHAR_LF, CHAR_NEL, NOTACHAR
1.1 misho 1115: #endif
1116:
1.1.1.4 misho 1117: #define VSPACE_BYTE_CASES \
1118: case CHAR_LF: \
1119: case CHAR_VT: \
1120: case CHAR_FF: \
1121: case CHAR_CR: \
1122: case CHAR_NEL
1123:
1124: #define VSPACE_CASES VSPACE_BYTE_CASES
1125: #endif /* EBCDIC */
1126:
1127: /* ------ End of whitespace macros ------ */
1128:
1129:
1.1 misho 1130:
1131: /* Private flags containing information about the compiled regex. They used to
1.1.1.4 misho 1132: live at the top end of the options word, but that got almost full, so they were
1133: moved to a 16-bit flags word - which got almost full, so now they are in a
1134: 32-bit flags word. From release 8.00, PCRE_NOPARTIAL is unused, as the
1135: restrictions on partial matching have been lifted. It remains for backwards
1.1 misho 1136: compatibility. */
1137:
1.1.1.4 misho 1138: #define PCRE_MODE8 0x00000001 /* compiled in 8 bit mode */
1139: #define PCRE_MODE16 0x00000002 /* compiled in 16 bit mode */
1140: #define PCRE_MODE32 0x00000004 /* compiled in 32 bit mode */
1141: #define PCRE_FIRSTSET 0x00000010 /* first_char is set */
1142: #define PCRE_FCH_CASELESS 0x00000020 /* caseless first char */
1143: #define PCRE_REQCHSET 0x00000040 /* req_byte is set */
1144: #define PCRE_RCH_CASELESS 0x00000080 /* caseless requested char */
1145: #define PCRE_STARTLINE 0x00000100 /* start after \n for multiline */
1146: #define PCRE_NOPARTIAL 0x00000200 /* can't use partial with this regex */
1147: #define PCRE_JCHANGED 0x00000400 /* j option used in regex */
1148: #define PCRE_HASCRORLF 0x00000800 /* explicit \r or \n in pattern */
1149: #define PCRE_HASTHEN 0x00001000 /* pattern contains (*THEN) */
1150: #define PCRE_MLSET 0x00002000 /* match limit set by regex */
1151: #define PCRE_RLSET 0x00004000 /* recursion limit set by regex */
1.1.1.5 ! misho 1152: #define PCRE_MATCH_EMPTY 0x00008000 /* pattern can match empty string */
1.1.1.4 misho 1153:
1154: #if defined COMPILE_PCRE8
1155: #define PCRE_MODE PCRE_MODE8
1156: #elif defined COMPILE_PCRE16
1157: #define PCRE_MODE PCRE_MODE16
1158: #elif defined COMPILE_PCRE32
1159: #define PCRE_MODE PCRE_MODE32
1.1.1.2 misho 1160: #endif
1.1.1.4 misho 1161: #define PCRE_MODE_MASK (PCRE_MODE8 | PCRE_MODE16 | PCRE_MODE32)
1.1 misho 1162:
1163: /* Flags for the "extra" block produced by pcre_study(). */
1164:
1165: #define PCRE_STUDY_MAPPED 0x0001 /* a map of starting chars exists */
1166: #define PCRE_STUDY_MINLEN 0x0002 /* a minimum length field exists */
1167:
1168: /* Masks for identifying the public options that are permitted at compile
1169: time, run time, or study time, respectively. */
1170:
1171: #define PCRE_NEWLINE_BITS (PCRE_NEWLINE_CR|PCRE_NEWLINE_LF|PCRE_NEWLINE_ANY| \
1172: PCRE_NEWLINE_ANYCRLF)
1173:
1174: #define PUBLIC_COMPILE_OPTIONS \
1175: (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \
1176: PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \
1.1.1.5 ! misho 1177: PCRE_NO_AUTO_CAPTURE|PCRE_NO_AUTO_POSSESS| \
! 1178: PCRE_NO_UTF8_CHECK|PCRE_AUTO_CALLOUT|PCRE_FIRSTLINE| \
1.1 misho 1179: PCRE_DUPNAMES|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \
1.1.1.4 misho 1180: PCRE_JAVASCRIPT_COMPAT|PCRE_UCP|PCRE_NO_START_OPTIMIZE|PCRE_NEVER_UTF)
1.1 misho 1181:
1182: #define PUBLIC_EXEC_OPTIONS \
1183: (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NOTEMPTY_ATSTART| \
1184: PCRE_NO_UTF8_CHECK|PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_NEWLINE_BITS| \
1185: PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE|PCRE_NO_START_OPTIMIZE)
1186:
1187: #define PUBLIC_DFA_EXEC_OPTIONS \
1188: (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NOTEMPTY_ATSTART| \
1189: PCRE_NO_UTF8_CHECK|PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_DFA_SHORTEST| \
1190: PCRE_DFA_RESTART|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \
1191: PCRE_NO_START_OPTIMIZE)
1192:
1193: #define PUBLIC_STUDY_OPTIONS \
1.1.1.3 misho 1194: (PCRE_STUDY_JIT_COMPILE|PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE| \
1.1.1.4 misho 1195: PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE|PCRE_STUDY_EXTRA_NEEDED)
1196:
1197: #define PUBLIC_JIT_EXEC_OPTIONS \
1198: (PCRE_NO_UTF8_CHECK|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|\
1199: PCRE_NOTEMPTY_ATSTART|PCRE_PARTIAL_SOFT|PCRE_PARTIAL_HARD)
1.1 misho 1200:
1.1.1.2 misho 1201: /* Magic number to provide a small check against being handed junk. */
1.1 misho 1202:
1203: #define MAGIC_NUMBER 0x50435245UL /* 'PCRE' */
1204:
1.1.1.2 misho 1205: /* This variable is used to detect a loaded regular expression
1206: in different endianness. */
1207:
1208: #define REVERSED_MAGIC_NUMBER 0x45524350UL /* 'ERCP' */
1209:
1.1 misho 1210: /* The maximum remaining length of subject we are prepared to search for a
1211: req_byte match. */
1212:
1213: #define REQ_BYTE_MAX 1000
1214:
1215: /* Miscellaneous definitions. The #ifndef is to pacify compiler warnings in
1216: environments where these macros are defined elsewhere. Unfortunately, there
1217: is no way to do the same for the typedef. */
1218:
1219: typedef int BOOL;
1220:
1221: #ifndef FALSE
1222: #define FALSE 0
1223: #define TRUE 1
1224: #endif
1225:
1226: /* If PCRE is to support UTF-8 on EBCDIC platforms, we cannot use normal
1227: character constants like '*' because the compiler would emit their EBCDIC code,
1228: which is different from their ASCII/UTF-8 code. Instead we define macros for
1229: the characters so that they always use the ASCII/UTF-8 code when UTF-8 support
1230: is enabled. When UTF-8 support is not enabled, the definitions use character
1231: literals. Both character and string versions of each character are needed, and
1232: there are some longer strings as well.
1233:
1234: This means that, on EBCDIC platforms, the PCRE library can handle either
1235: EBCDIC, or UTF-8, but not both. To support both in the same compiled library
1236: would need different lookups depending on whether PCRE_UTF8 was set or not.
1237: This would make it impossible to use characters in switch/case statements,
1238: which would reduce performance. For a theoretical use (which nobody has asked
1239: for) in a minority area (EBCDIC platforms), this is not sensible. Any
1240: application that did need both could compile two versions of the library, using
1241: macros to give the functions distinct names. */
1242:
1.1.1.2 misho 1243: #ifndef SUPPORT_UTF
1.1 misho 1244:
1245: /* UTF-8 support is not enabled; use the platform-dependent character literals
1.1.1.4 misho 1246: so that PCRE works in both ASCII and EBCDIC environments, but only in non-UTF
1247: mode. Newline characters are problematic in EBCDIC. Though it has CR and LF
1248: characters, a common practice has been to use its NL (0x15) character as the
1249: line terminator in C-like processing environments. However, sometimes the LF
1250: (0x25) character is used instead, according to this Unicode document:
1251:
1252: http://unicode.org/standard/reports/tr13/tr13-5.html
1253:
1254: PCRE defaults EBCDIC NL to 0x15, but has a build-time option to select 0x25
1255: instead. Whichever is *not* chosen is defined as NEL.
1256:
1257: In both ASCII and EBCDIC environments, CHAR_NL and CHAR_LF are synonyms for the
1258: same code point. */
1259:
1260: #ifdef EBCDIC
1261:
1262: #ifndef EBCDIC_NL25
1263: #define CHAR_NL '\x15'
1264: #define CHAR_NEL '\x25'
1265: #define STR_NL "\x15"
1266: #define STR_NEL "\x25"
1267: #else
1268: #define CHAR_NL '\x25'
1269: #define CHAR_NEL '\x15'
1270: #define STR_NL "\x25"
1271: #define STR_NEL "\x15"
1272: #endif
1273:
1274: #define CHAR_LF CHAR_NL
1275: #define STR_LF STR_NL
1276:
1277: #define CHAR_ESC '\047'
1278: #define CHAR_DEL '\007'
1279: #define STR_ESC "\047"
1280: #define STR_DEL "\007"
1281:
1282: #else /* Not EBCDIC */
1283:
1284: /* In ASCII/Unicode, linefeed is '\n' and we equate this to NL for
1285: compatibility. NEL is the Unicode newline character; make sure it is
1286: a positive value. */
1287:
1288: #define CHAR_LF '\n'
1289: #define CHAR_NL CHAR_LF
1290: #define CHAR_NEL ((unsigned char)'\x85')
1291: #define CHAR_ESC '\033'
1292: #define CHAR_DEL '\177'
1293:
1294: #define STR_LF "\n"
1295: #define STR_NL STR_LF
1296: #define STR_NEL "\x85"
1297: #define STR_ESC "\033"
1298: #define STR_DEL "\177"
1299:
1300: #endif /* EBCDIC */
1.1 misho 1301:
1.1.1.4 misho 1302: /* The remaining definitions work in both environments. */
1303:
1304: #define CHAR_NULL '\0'
1.1 misho 1305: #define CHAR_HT '\t'
1306: #define CHAR_VT '\v'
1307: #define CHAR_FF '\f'
1308: #define CHAR_CR '\r'
1309: #define CHAR_BS '\b'
1310: #define CHAR_BEL '\a'
1311:
1312: #define CHAR_SPACE ' '
1313: #define CHAR_EXCLAMATION_MARK '!'
1314: #define CHAR_QUOTATION_MARK '"'
1315: #define CHAR_NUMBER_SIGN '#'
1316: #define CHAR_DOLLAR_SIGN '$'
1317: #define CHAR_PERCENT_SIGN '%'
1318: #define CHAR_AMPERSAND '&'
1319: #define CHAR_APOSTROPHE '\''
1320: #define CHAR_LEFT_PARENTHESIS '('
1321: #define CHAR_RIGHT_PARENTHESIS ')'
1322: #define CHAR_ASTERISK '*'
1323: #define CHAR_PLUS '+'
1324: #define CHAR_COMMA ','
1325: #define CHAR_MINUS '-'
1326: #define CHAR_DOT '.'
1327: #define CHAR_SLASH '/'
1328: #define CHAR_0 '0'
1329: #define CHAR_1 '1'
1330: #define CHAR_2 '2'
1331: #define CHAR_3 '3'
1332: #define CHAR_4 '4'
1333: #define CHAR_5 '5'
1334: #define CHAR_6 '6'
1335: #define CHAR_7 '7'
1336: #define CHAR_8 '8'
1337: #define CHAR_9 '9'
1338: #define CHAR_COLON ':'
1339: #define CHAR_SEMICOLON ';'
1340: #define CHAR_LESS_THAN_SIGN '<'
1341: #define CHAR_EQUALS_SIGN '='
1342: #define CHAR_GREATER_THAN_SIGN '>'
1343: #define CHAR_QUESTION_MARK '?'
1344: #define CHAR_COMMERCIAL_AT '@'
1345: #define CHAR_A 'A'
1346: #define CHAR_B 'B'
1347: #define CHAR_C 'C'
1348: #define CHAR_D 'D'
1349: #define CHAR_E 'E'
1350: #define CHAR_F 'F'
1351: #define CHAR_G 'G'
1352: #define CHAR_H 'H'
1353: #define CHAR_I 'I'
1354: #define CHAR_J 'J'
1355: #define CHAR_K 'K'
1356: #define CHAR_L 'L'
1357: #define CHAR_M 'M'
1358: #define CHAR_N 'N'
1359: #define CHAR_O 'O'
1360: #define CHAR_P 'P'
1361: #define CHAR_Q 'Q'
1362: #define CHAR_R 'R'
1363: #define CHAR_S 'S'
1364: #define CHAR_T 'T'
1365: #define CHAR_U 'U'
1366: #define CHAR_V 'V'
1367: #define CHAR_W 'W'
1368: #define CHAR_X 'X'
1369: #define CHAR_Y 'Y'
1370: #define CHAR_Z 'Z'
1371: #define CHAR_LEFT_SQUARE_BRACKET '['
1372: #define CHAR_BACKSLASH '\\'
1373: #define CHAR_RIGHT_SQUARE_BRACKET ']'
1374: #define CHAR_CIRCUMFLEX_ACCENT '^'
1375: #define CHAR_UNDERSCORE '_'
1376: #define CHAR_GRAVE_ACCENT '`'
1377: #define CHAR_a 'a'
1378: #define CHAR_b 'b'
1379: #define CHAR_c 'c'
1380: #define CHAR_d 'd'
1381: #define CHAR_e 'e'
1382: #define CHAR_f 'f'
1383: #define CHAR_g 'g'
1384: #define CHAR_h 'h'
1385: #define CHAR_i 'i'
1386: #define CHAR_j 'j'
1387: #define CHAR_k 'k'
1388: #define CHAR_l 'l'
1389: #define CHAR_m 'm'
1390: #define CHAR_n 'n'
1391: #define CHAR_o 'o'
1392: #define CHAR_p 'p'
1393: #define CHAR_q 'q'
1394: #define CHAR_r 'r'
1395: #define CHAR_s 's'
1396: #define CHAR_t 't'
1397: #define CHAR_u 'u'
1398: #define CHAR_v 'v'
1399: #define CHAR_w 'w'
1400: #define CHAR_x 'x'
1401: #define CHAR_y 'y'
1402: #define CHAR_z 'z'
1403: #define CHAR_LEFT_CURLY_BRACKET '{'
1404: #define CHAR_VERTICAL_LINE '|'
1405: #define CHAR_RIGHT_CURLY_BRACKET '}'
1406: #define CHAR_TILDE '~'
1407:
1408: #define STR_HT "\t"
1409: #define STR_VT "\v"
1410: #define STR_FF "\f"
1411: #define STR_CR "\r"
1412: #define STR_BS "\b"
1413: #define STR_BEL "\a"
1414:
1415: #define STR_SPACE " "
1416: #define STR_EXCLAMATION_MARK "!"
1417: #define STR_QUOTATION_MARK "\""
1418: #define STR_NUMBER_SIGN "#"
1419: #define STR_DOLLAR_SIGN "$"
1420: #define STR_PERCENT_SIGN "%"
1421: #define STR_AMPERSAND "&"
1422: #define STR_APOSTROPHE "'"
1423: #define STR_LEFT_PARENTHESIS "("
1424: #define STR_RIGHT_PARENTHESIS ")"
1425: #define STR_ASTERISK "*"
1426: #define STR_PLUS "+"
1427: #define STR_COMMA ","
1428: #define STR_MINUS "-"
1429: #define STR_DOT "."
1430: #define STR_SLASH "/"
1431: #define STR_0 "0"
1432: #define STR_1 "1"
1433: #define STR_2 "2"
1434: #define STR_3 "3"
1435: #define STR_4 "4"
1436: #define STR_5 "5"
1437: #define STR_6 "6"
1438: #define STR_7 "7"
1439: #define STR_8 "8"
1440: #define STR_9 "9"
1441: #define STR_COLON ":"
1442: #define STR_SEMICOLON ";"
1443: #define STR_LESS_THAN_SIGN "<"
1444: #define STR_EQUALS_SIGN "="
1445: #define STR_GREATER_THAN_SIGN ">"
1446: #define STR_QUESTION_MARK "?"
1447: #define STR_COMMERCIAL_AT "@"
1448: #define STR_A "A"
1449: #define STR_B "B"
1450: #define STR_C "C"
1451: #define STR_D "D"
1452: #define STR_E "E"
1453: #define STR_F "F"
1454: #define STR_G "G"
1455: #define STR_H "H"
1456: #define STR_I "I"
1457: #define STR_J "J"
1458: #define STR_K "K"
1459: #define STR_L "L"
1460: #define STR_M "M"
1461: #define STR_N "N"
1462: #define STR_O "O"
1463: #define STR_P "P"
1464: #define STR_Q "Q"
1465: #define STR_R "R"
1466: #define STR_S "S"
1467: #define STR_T "T"
1468: #define STR_U "U"
1469: #define STR_V "V"
1470: #define STR_W "W"
1471: #define STR_X "X"
1472: #define STR_Y "Y"
1473: #define STR_Z "Z"
1474: #define STR_LEFT_SQUARE_BRACKET "["
1475: #define STR_BACKSLASH "\\"
1476: #define STR_RIGHT_SQUARE_BRACKET "]"
1477: #define STR_CIRCUMFLEX_ACCENT "^"
1478: #define STR_UNDERSCORE "_"
1479: #define STR_GRAVE_ACCENT "`"
1480: #define STR_a "a"
1481: #define STR_b "b"
1482: #define STR_c "c"
1483: #define STR_d "d"
1484: #define STR_e "e"
1485: #define STR_f "f"
1486: #define STR_g "g"
1487: #define STR_h "h"
1488: #define STR_i "i"
1489: #define STR_j "j"
1490: #define STR_k "k"
1491: #define STR_l "l"
1492: #define STR_m "m"
1493: #define STR_n "n"
1494: #define STR_o "o"
1495: #define STR_p "p"
1496: #define STR_q "q"
1497: #define STR_r "r"
1498: #define STR_s "s"
1499: #define STR_t "t"
1500: #define STR_u "u"
1501: #define STR_v "v"
1502: #define STR_w "w"
1503: #define STR_x "x"
1504: #define STR_y "y"
1505: #define STR_z "z"
1506: #define STR_LEFT_CURLY_BRACKET "{"
1507: #define STR_VERTICAL_LINE "|"
1508: #define STR_RIGHT_CURLY_BRACKET "}"
1509: #define STR_TILDE "~"
1510:
1511: #define STRING_ACCEPT0 "ACCEPT\0"
1512: #define STRING_COMMIT0 "COMMIT\0"
1513: #define STRING_F0 "F\0"
1514: #define STRING_FAIL0 "FAIL\0"
1515: #define STRING_MARK0 "MARK\0"
1516: #define STRING_PRUNE0 "PRUNE\0"
1517: #define STRING_SKIP0 "SKIP\0"
1518: #define STRING_THEN "THEN"
1519:
1520: #define STRING_alpha0 "alpha\0"
1521: #define STRING_lower0 "lower\0"
1522: #define STRING_upper0 "upper\0"
1523: #define STRING_alnum0 "alnum\0"
1524: #define STRING_ascii0 "ascii\0"
1525: #define STRING_blank0 "blank\0"
1526: #define STRING_cntrl0 "cntrl\0"
1527: #define STRING_digit0 "digit\0"
1528: #define STRING_graph0 "graph\0"
1529: #define STRING_print0 "print\0"
1530: #define STRING_punct0 "punct\0"
1531: #define STRING_space0 "space\0"
1532: #define STRING_word0 "word\0"
1533: #define STRING_xdigit "xdigit"
1534:
1535: #define STRING_DEFINE "DEFINE"
1.1.1.5 ! misho 1536: #define STRING_WEIRD_STARTWORD "[:<:]]"
! 1537: #define STRING_WEIRD_ENDWORD "[:>:]]"
1.1 misho 1538:
1.1.1.5 ! misho 1539: #define STRING_CR_RIGHTPAR "CR)"
! 1540: #define STRING_LF_RIGHTPAR "LF)"
! 1541: #define STRING_CRLF_RIGHTPAR "CRLF)"
! 1542: #define STRING_ANY_RIGHTPAR "ANY)"
! 1543: #define STRING_ANYCRLF_RIGHTPAR "ANYCRLF)"
! 1544: #define STRING_BSR_ANYCRLF_RIGHTPAR "BSR_ANYCRLF)"
! 1545: #define STRING_BSR_UNICODE_RIGHTPAR "BSR_UNICODE)"
! 1546: #define STRING_UTF8_RIGHTPAR "UTF8)"
! 1547: #define STRING_UTF16_RIGHTPAR "UTF16)"
! 1548: #define STRING_UTF32_RIGHTPAR "UTF32)"
! 1549: #define STRING_UTF_RIGHTPAR "UTF)"
! 1550: #define STRING_UCP_RIGHTPAR "UCP)"
! 1551: #define STRING_NO_AUTO_POSSESS_RIGHTPAR "NO_AUTO_POSSESS)"
! 1552: #define STRING_NO_START_OPT_RIGHTPAR "NO_START_OPT)"
! 1553: #define STRING_LIMIT_MATCH_EQ "LIMIT_MATCH="
! 1554: #define STRING_LIMIT_RECURSION_EQ "LIMIT_RECURSION="
1.1 misho 1555:
1.1.1.2 misho 1556: #else /* SUPPORT_UTF */
1.1 misho 1557:
1558: /* UTF-8 support is enabled; always use UTF-8 (=ASCII) character codes. This
1559: works in both modes non-EBCDIC platforms, and on EBCDIC platforms in UTF-8 mode
1560: only. */
1561:
1562: #define CHAR_HT '\011'
1563: #define CHAR_VT '\013'
1564: #define CHAR_FF '\014'
1565: #define CHAR_CR '\015'
1.1.1.4 misho 1566: #define CHAR_LF '\012'
1567: #define CHAR_NL CHAR_LF
1568: #define CHAR_NEL ((unsigned char)'\x85')
1.1 misho 1569: #define CHAR_BS '\010'
1570: #define CHAR_BEL '\007'
1571: #define CHAR_ESC '\033'
1572: #define CHAR_DEL '\177'
1573:
1.1.1.4 misho 1574: #define CHAR_NULL '\0'
1.1 misho 1575: #define CHAR_SPACE '\040'
1576: #define CHAR_EXCLAMATION_MARK '\041'
1577: #define CHAR_QUOTATION_MARK '\042'
1578: #define CHAR_NUMBER_SIGN '\043'
1579: #define CHAR_DOLLAR_SIGN '\044'
1580: #define CHAR_PERCENT_SIGN '\045'
1581: #define CHAR_AMPERSAND '\046'
1582: #define CHAR_APOSTROPHE '\047'
1583: #define CHAR_LEFT_PARENTHESIS '\050'
1584: #define CHAR_RIGHT_PARENTHESIS '\051'
1585: #define CHAR_ASTERISK '\052'
1586: #define CHAR_PLUS '\053'
1587: #define CHAR_COMMA '\054'
1588: #define CHAR_MINUS '\055'
1589: #define CHAR_DOT '\056'
1590: #define CHAR_SLASH '\057'
1591: #define CHAR_0 '\060'
1592: #define CHAR_1 '\061'
1593: #define CHAR_2 '\062'
1594: #define CHAR_3 '\063'
1595: #define CHAR_4 '\064'
1596: #define CHAR_5 '\065'
1597: #define CHAR_6 '\066'
1598: #define CHAR_7 '\067'
1599: #define CHAR_8 '\070'
1600: #define CHAR_9 '\071'
1601: #define CHAR_COLON '\072'
1602: #define CHAR_SEMICOLON '\073'
1603: #define CHAR_LESS_THAN_SIGN '\074'
1604: #define CHAR_EQUALS_SIGN '\075'
1605: #define CHAR_GREATER_THAN_SIGN '\076'
1606: #define CHAR_QUESTION_MARK '\077'
1607: #define CHAR_COMMERCIAL_AT '\100'
1608: #define CHAR_A '\101'
1609: #define CHAR_B '\102'
1610: #define CHAR_C '\103'
1611: #define CHAR_D '\104'
1612: #define CHAR_E '\105'
1613: #define CHAR_F '\106'
1614: #define CHAR_G '\107'
1615: #define CHAR_H '\110'
1616: #define CHAR_I '\111'
1617: #define CHAR_J '\112'
1618: #define CHAR_K '\113'
1619: #define CHAR_L '\114'
1620: #define CHAR_M '\115'
1621: #define CHAR_N '\116'
1622: #define CHAR_O '\117'
1623: #define CHAR_P '\120'
1624: #define CHAR_Q '\121'
1625: #define CHAR_R '\122'
1626: #define CHAR_S '\123'
1627: #define CHAR_T '\124'
1628: #define CHAR_U '\125'
1629: #define CHAR_V '\126'
1630: #define CHAR_W '\127'
1631: #define CHAR_X '\130'
1632: #define CHAR_Y '\131'
1633: #define CHAR_Z '\132'
1634: #define CHAR_LEFT_SQUARE_BRACKET '\133'
1635: #define CHAR_BACKSLASH '\134'
1636: #define CHAR_RIGHT_SQUARE_BRACKET '\135'
1637: #define CHAR_CIRCUMFLEX_ACCENT '\136'
1638: #define CHAR_UNDERSCORE '\137'
1639: #define CHAR_GRAVE_ACCENT '\140'
1640: #define CHAR_a '\141'
1641: #define CHAR_b '\142'
1642: #define CHAR_c '\143'
1643: #define CHAR_d '\144'
1644: #define CHAR_e '\145'
1645: #define CHAR_f '\146'
1646: #define CHAR_g '\147'
1647: #define CHAR_h '\150'
1648: #define CHAR_i '\151'
1649: #define CHAR_j '\152'
1650: #define CHAR_k '\153'
1651: #define CHAR_l '\154'
1652: #define CHAR_m '\155'
1653: #define CHAR_n '\156'
1654: #define CHAR_o '\157'
1655: #define CHAR_p '\160'
1656: #define CHAR_q '\161'
1657: #define CHAR_r '\162'
1658: #define CHAR_s '\163'
1659: #define CHAR_t '\164'
1660: #define CHAR_u '\165'
1661: #define CHAR_v '\166'
1662: #define CHAR_w '\167'
1663: #define CHAR_x '\170'
1664: #define CHAR_y '\171'
1665: #define CHAR_z '\172'
1666: #define CHAR_LEFT_CURLY_BRACKET '\173'
1667: #define CHAR_VERTICAL_LINE '\174'
1668: #define CHAR_RIGHT_CURLY_BRACKET '\175'
1669: #define CHAR_TILDE '\176'
1670:
1671: #define STR_HT "\011"
1672: #define STR_VT "\013"
1673: #define STR_FF "\014"
1674: #define STR_CR "\015"
1675: #define STR_NL "\012"
1676: #define STR_BS "\010"
1677: #define STR_BEL "\007"
1678: #define STR_ESC "\033"
1679: #define STR_DEL "\177"
1680:
1681: #define STR_SPACE "\040"
1682: #define STR_EXCLAMATION_MARK "\041"
1683: #define STR_QUOTATION_MARK "\042"
1684: #define STR_NUMBER_SIGN "\043"
1685: #define STR_DOLLAR_SIGN "\044"
1686: #define STR_PERCENT_SIGN "\045"
1687: #define STR_AMPERSAND "\046"
1688: #define STR_APOSTROPHE "\047"
1689: #define STR_LEFT_PARENTHESIS "\050"
1690: #define STR_RIGHT_PARENTHESIS "\051"
1691: #define STR_ASTERISK "\052"
1692: #define STR_PLUS "\053"
1693: #define STR_COMMA "\054"
1694: #define STR_MINUS "\055"
1695: #define STR_DOT "\056"
1696: #define STR_SLASH "\057"
1697: #define STR_0 "\060"
1698: #define STR_1 "\061"
1699: #define STR_2 "\062"
1700: #define STR_3 "\063"
1701: #define STR_4 "\064"
1702: #define STR_5 "\065"
1703: #define STR_6 "\066"
1704: #define STR_7 "\067"
1705: #define STR_8 "\070"
1706: #define STR_9 "\071"
1707: #define STR_COLON "\072"
1708: #define STR_SEMICOLON "\073"
1709: #define STR_LESS_THAN_SIGN "\074"
1710: #define STR_EQUALS_SIGN "\075"
1711: #define STR_GREATER_THAN_SIGN "\076"
1712: #define STR_QUESTION_MARK "\077"
1713: #define STR_COMMERCIAL_AT "\100"
1714: #define STR_A "\101"
1715: #define STR_B "\102"
1716: #define STR_C "\103"
1717: #define STR_D "\104"
1718: #define STR_E "\105"
1719: #define STR_F "\106"
1720: #define STR_G "\107"
1721: #define STR_H "\110"
1722: #define STR_I "\111"
1723: #define STR_J "\112"
1724: #define STR_K "\113"
1725: #define STR_L "\114"
1726: #define STR_M "\115"
1727: #define STR_N "\116"
1728: #define STR_O "\117"
1729: #define STR_P "\120"
1730: #define STR_Q "\121"
1731: #define STR_R "\122"
1732: #define STR_S "\123"
1733: #define STR_T "\124"
1734: #define STR_U "\125"
1735: #define STR_V "\126"
1736: #define STR_W "\127"
1737: #define STR_X "\130"
1738: #define STR_Y "\131"
1739: #define STR_Z "\132"
1740: #define STR_LEFT_SQUARE_BRACKET "\133"
1741: #define STR_BACKSLASH "\134"
1742: #define STR_RIGHT_SQUARE_BRACKET "\135"
1743: #define STR_CIRCUMFLEX_ACCENT "\136"
1744: #define STR_UNDERSCORE "\137"
1745: #define STR_GRAVE_ACCENT "\140"
1746: #define STR_a "\141"
1747: #define STR_b "\142"
1748: #define STR_c "\143"
1749: #define STR_d "\144"
1750: #define STR_e "\145"
1751: #define STR_f "\146"
1752: #define STR_g "\147"
1753: #define STR_h "\150"
1754: #define STR_i "\151"
1755: #define STR_j "\152"
1756: #define STR_k "\153"
1757: #define STR_l "\154"
1758: #define STR_m "\155"
1759: #define STR_n "\156"
1760: #define STR_o "\157"
1761: #define STR_p "\160"
1762: #define STR_q "\161"
1763: #define STR_r "\162"
1764: #define STR_s "\163"
1765: #define STR_t "\164"
1766: #define STR_u "\165"
1767: #define STR_v "\166"
1768: #define STR_w "\167"
1769: #define STR_x "\170"
1770: #define STR_y "\171"
1771: #define STR_z "\172"
1772: #define STR_LEFT_CURLY_BRACKET "\173"
1773: #define STR_VERTICAL_LINE "\174"
1774: #define STR_RIGHT_CURLY_BRACKET "\175"
1775: #define STR_TILDE "\176"
1776:
1777: #define STRING_ACCEPT0 STR_A STR_C STR_C STR_E STR_P STR_T "\0"
1778: #define STRING_COMMIT0 STR_C STR_O STR_M STR_M STR_I STR_T "\0"
1779: #define STRING_F0 STR_F "\0"
1780: #define STRING_FAIL0 STR_F STR_A STR_I STR_L "\0"
1781: #define STRING_MARK0 STR_M STR_A STR_R STR_K "\0"
1782: #define STRING_PRUNE0 STR_P STR_R STR_U STR_N STR_E "\0"
1783: #define STRING_SKIP0 STR_S STR_K STR_I STR_P "\0"
1784: #define STRING_THEN STR_T STR_H STR_E STR_N
1785:
1786: #define STRING_alpha0 STR_a STR_l STR_p STR_h STR_a "\0"
1787: #define STRING_lower0 STR_l STR_o STR_w STR_e STR_r "\0"
1788: #define STRING_upper0 STR_u STR_p STR_p STR_e STR_r "\0"
1789: #define STRING_alnum0 STR_a STR_l STR_n STR_u STR_m "\0"
1790: #define STRING_ascii0 STR_a STR_s STR_c STR_i STR_i "\0"
1791: #define STRING_blank0 STR_b STR_l STR_a STR_n STR_k "\0"
1792: #define STRING_cntrl0 STR_c STR_n STR_t STR_r STR_l "\0"
1793: #define STRING_digit0 STR_d STR_i STR_g STR_i STR_t "\0"
1794: #define STRING_graph0 STR_g STR_r STR_a STR_p STR_h "\0"
1795: #define STRING_print0 STR_p STR_r STR_i STR_n STR_t "\0"
1796: #define STRING_punct0 STR_p STR_u STR_n STR_c STR_t "\0"
1797: #define STRING_space0 STR_s STR_p STR_a STR_c STR_e "\0"
1798: #define STRING_word0 STR_w STR_o STR_r STR_d "\0"
1799: #define STRING_xdigit STR_x STR_d STR_i STR_g STR_i STR_t
1800:
1801: #define STRING_DEFINE STR_D STR_E STR_F STR_I STR_N STR_E
1.1.1.5 ! misho 1802: #define STRING_WEIRD_STARTWORD STR_LEFT_SQUARE_BRACKET STR_COLON STR_LESS_THAN_SIGN STR_COLON STR_RIGHT_SQUARE_BRACKET STR_RIGHT_SQUARE_BRACKET
! 1803: #define STRING_WEIRD_ENDWORD STR_LEFT_SQUARE_BRACKET STR_COLON STR_GREATER_THAN_SIGN STR_COLON STR_RIGHT_SQUARE_BRACKET STR_RIGHT_SQUARE_BRACKET
1.1 misho 1804:
1.1.1.5 ! misho 1805: #define STRING_CR_RIGHTPAR STR_C STR_R STR_RIGHT_PARENTHESIS
! 1806: #define STRING_LF_RIGHTPAR STR_L STR_F STR_RIGHT_PARENTHESIS
! 1807: #define STRING_CRLF_RIGHTPAR STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
! 1808: #define STRING_ANY_RIGHTPAR STR_A STR_N STR_Y STR_RIGHT_PARENTHESIS
! 1809: #define STRING_ANYCRLF_RIGHTPAR STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
! 1810: #define STRING_BSR_ANYCRLF_RIGHTPAR STR_B STR_S STR_R STR_UNDERSCORE STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
! 1811: #define STRING_BSR_UNICODE_RIGHTPAR STR_B STR_S STR_R STR_UNDERSCORE STR_U STR_N STR_I STR_C STR_O STR_D STR_E STR_RIGHT_PARENTHESIS
! 1812: #define STRING_UTF8_RIGHTPAR STR_U STR_T STR_F STR_8 STR_RIGHT_PARENTHESIS
! 1813: #define STRING_UTF16_RIGHTPAR STR_U STR_T STR_F STR_1 STR_6 STR_RIGHT_PARENTHESIS
! 1814: #define STRING_UTF32_RIGHTPAR STR_U STR_T STR_F STR_3 STR_2 STR_RIGHT_PARENTHESIS
! 1815: #define STRING_UTF_RIGHTPAR STR_U STR_T STR_F STR_RIGHT_PARENTHESIS
! 1816: #define STRING_UCP_RIGHTPAR STR_U STR_C STR_P STR_RIGHT_PARENTHESIS
! 1817: #define STRING_NO_AUTO_POSSESS_RIGHTPAR STR_N STR_O STR_UNDERSCORE STR_A STR_U STR_T STR_O STR_UNDERSCORE STR_P STR_O STR_S STR_S STR_E STR_S STR_S STR_RIGHT_PARENTHESIS
! 1818: #define STRING_NO_START_OPT_RIGHTPAR STR_N STR_O STR_UNDERSCORE STR_S STR_T STR_A STR_R STR_T STR_UNDERSCORE STR_O STR_P STR_T STR_RIGHT_PARENTHESIS
! 1819: #define STRING_LIMIT_MATCH_EQ STR_L STR_I STR_M STR_I STR_T STR_UNDERSCORE STR_M STR_A STR_T STR_C STR_H STR_EQUALS_SIGN
! 1820: #define STRING_LIMIT_RECURSION_EQ STR_L STR_I STR_M STR_I STR_T STR_UNDERSCORE STR_R STR_E STR_C STR_U STR_R STR_S STR_I STR_O STR_N STR_EQUALS_SIGN
1.1 misho 1821:
1.1.1.2 misho 1822: #endif /* SUPPORT_UTF */
1.1 misho 1823:
1824: /* Escape items that are just an encoding of a particular data value. */
1825:
1826: #ifndef ESC_e
1827: #define ESC_e CHAR_ESC
1828: #endif
1829:
1830: #ifndef ESC_f
1831: #define ESC_f CHAR_FF
1832: #endif
1833:
1834: #ifndef ESC_n
1.1.1.4 misho 1835: #define ESC_n CHAR_LF
1.1 misho 1836: #endif
1837:
1838: #ifndef ESC_r
1839: #define ESC_r CHAR_CR
1840: #endif
1841:
1842: /* We can't officially use ESC_t because it is a POSIX reserved identifier
1843: (presumably because of all the others like size_t). */
1844:
1845: #ifndef ESC_tee
1846: #define ESC_tee CHAR_HT
1847: #endif
1848:
1849: /* Codes for different types of Unicode property */
1850:
1851: #define PT_ANY 0 /* Any property - matches all chars */
1852: #define PT_LAMP 1 /* L& - the union of Lu, Ll, Lt */
1853: #define PT_GC 2 /* Specified general characteristic (e.g. L) */
1854: #define PT_PC 3 /* Specified particular characteristic (e.g. Lu) */
1855: #define PT_SC 4 /* Script (e.g. Han) */
1856: #define PT_ALNUM 5 /* Alphanumeric - the union of L and N */
1857: #define PT_SPACE 6 /* Perl space - Z plus 9,10,12,13 */
1858: #define PT_PXSPACE 7 /* POSIX space - Z plus 9,10,11,12,13 */
1859: #define PT_WORD 8 /* Word - L plus N plus underscore */
1.1.1.4 misho 1860: #define PT_CLIST 9 /* Pseudo-property: match character list */
1861: #define PT_UCNC 10 /* Universal Character nameable character */
1.1.1.5 ! misho 1862: #define PT_TABSIZE 11 /* Size of square table for autopossessify tests */
! 1863:
! 1864: /* The following special properties are used only in XCLASS items, when POSIX
! 1865: classes are specified and PCRE_UCP is set - in other words, for Unicode
! 1866: handling of these classes. They are not available via the \p or \P escapes like
! 1867: those in the above list, and so they do not take part in the autopossessifying
! 1868: table. */
! 1869:
! 1870: #define PT_PXGRAPH 11 /* [:graph:] - characters that mark the paper */
! 1871: #define PT_PXPRINT 12 /* [:print:] - [:graph:] plus non-control spaces */
! 1872: #define PT_PXPUNCT 13 /* [:punct:] - punctuation characters */
1.1 misho 1873:
1874: /* Flag bits and data types for the extended class (OP_XCLASS) for classes that
1.1.1.2 misho 1875: contain characters with values greater than 255. */
1.1 misho 1876:
1877: #define XCL_NOT 0x01 /* Flag: this is a negative class */
1878: #define XCL_MAP 0x02 /* Flag: a 32-byte map is present */
1879:
1880: #define XCL_END 0 /* Marks end of individual items */
1881: #define XCL_SINGLE 1 /* Single item (one multibyte char) follows */
1882: #define XCL_RANGE 2 /* A range (two multibyte chars) follows */
1883: #define XCL_PROP 3 /* Unicode property (2-byte property code follows) */
1884: #define XCL_NOTPROP 4 /* Unicode inverted property (ditto) */
1885:
1886: /* These are escaped items that aren't just an encoding of a particular data
1.1.1.5 ! misho 1887: value such as \n. They must have non-zero values, as check_escape() returns 0
! 1888: for a data character. Also, they must appear in the same order as in the
! 1889: opcode definitions below, up to ESC_z. There's a dummy for OP_ALLANY because it
1.1 misho 1890: corresponds to "." in DOTALL mode rather than an escape sequence. It is also
1.1.1.2 misho 1891: used for [^] in JavaScript compatibility mode, and for \C in non-utf mode. In
1.1 misho 1892: non-DOTALL mode, "." behaves like \N.
1893:
1894: The special values ESC_DU, ESC_du, etc. are used instead of ESC_D, ESC_d, etc.
1.1.1.4 misho 1895: when PCRE_UCP is set and replacement of \d etc by \p sequences is required.
1.1 misho 1896: They must be contiguous, and remain in order so that the replacements can be
1897: looked up from a table.
1898:
1.1.1.4 misho 1899: Negative numbers are used to encode a backreference (\1, \2, \3, etc.) in
1900: check_escape(). There are two tests in the code for an escape
1.1 misho 1901: greater than ESC_b and less than ESC_Z to detect the types that may be
1902: repeated. These are the types that consume characters. If any new escapes are
1903: put in between that don't consume a character, that code will have to change.
1904: */
1905:
1906: enum { ESC_A = 1, ESC_G, ESC_K, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s,
1907: ESC_W, ESC_w, ESC_N, ESC_dum, ESC_C, ESC_P, ESC_p, ESC_R, ESC_H,
1908: ESC_h, ESC_V, ESC_v, ESC_X, ESC_Z, ESC_z,
1909: ESC_E, ESC_Q, ESC_g, ESC_k,
1.1.1.4 misho 1910: ESC_DU, ESC_du, ESC_SU, ESC_su, ESC_WU, ESC_wu };
1.1 misho 1911:
1912:
1.1.1.5 ! misho 1913: /********************** Opcode definitions ******************/
! 1914:
! 1915: /****** NOTE NOTE NOTE ******
! 1916:
! 1917: Starting from 1 (i.e. after OP_END), the values up to OP_EOD must correspond in
! 1918: order to the list of escapes immediately above. Furthermore, values up to
! 1919: OP_DOLLM must not be changed without adjusting the table called autoposstab in
! 1920: pcre_compile.c
! 1921:
! 1922: Whenever this list is updated, the two macro definitions that follow must be
! 1923: updated to match. The possessification table called "opcode_possessify" in
! 1924: pcre_compile.c must also be updated, and also the tables called "coptable"
! 1925: and "poptable" in pcre_dfa_exec.c.
! 1926:
! 1927: ****** NOTE NOTE NOTE ******/
! 1928:
! 1929:
! 1930: /* The values between FIRST_AUTOTAB_OP and LAST_AUTOTAB_RIGHT_OP, inclusive,
! 1931: are used in a table for deciding whether a repeated character type can be
! 1932: auto-possessified. */
! 1933:
! 1934: #define FIRST_AUTOTAB_OP OP_NOT_DIGIT
! 1935: #define LAST_AUTOTAB_LEFT_OP OP_EXTUNI
! 1936: #define LAST_AUTOTAB_RIGHT_OP OP_DOLLM
1.1 misho 1937:
1938: enum {
1939: OP_END, /* 0 End of pattern */
1940:
1941: /* Values corresponding to backslashed metacharacters */
1942:
1943: OP_SOD, /* 1 Start of data: \A */
1944: OP_SOM, /* 2 Start of match (subject + offset): \G */
1945: OP_SET_SOM, /* 3 Set start of match (\K) */
1946: OP_NOT_WORD_BOUNDARY, /* 4 \B */
1947: OP_WORD_BOUNDARY, /* 5 \b */
1948: OP_NOT_DIGIT, /* 6 \D */
1949: OP_DIGIT, /* 7 \d */
1950: OP_NOT_WHITESPACE, /* 8 \S */
1951: OP_WHITESPACE, /* 9 \s */
1952: OP_NOT_WORDCHAR, /* 10 \W */
1953: OP_WORDCHAR, /* 11 \w */
1954:
1.1.1.4 misho 1955: OP_ANY, /* 12 Match any character except newline (\N) */
1.1 misho 1956: OP_ALLANY, /* 13 Match any character */
1957: OP_ANYBYTE, /* 14 Match any byte (\C); different to OP_ANY for UTF-8 */
1958: OP_NOTPROP, /* 15 \P (not Unicode property) */
1959: OP_PROP, /* 16 \p (Unicode property) */
1960: OP_ANYNL, /* 17 \R (any newline sequence) */
1961: OP_NOT_HSPACE, /* 18 \H (not horizontal whitespace) */
1962: OP_HSPACE, /* 19 \h (horizontal whitespace) */
1963: OP_NOT_VSPACE, /* 20 \V (not vertical whitespace) */
1964: OP_VSPACE, /* 21 \v (vertical whitespace) */
1965: OP_EXTUNI, /* 22 \X (extended Unicode sequence */
1.1.1.4 misho 1966: OP_EODN, /* 23 End of data or \n at end of data (\Z) */
1967: OP_EOD, /* 24 End of data (\z) */
1.1 misho 1968:
1.1.1.5 ! misho 1969: /* Line end assertions */
! 1970:
! 1971: OP_DOLL, /* 25 End of line - not multiline */
! 1972: OP_DOLLM, /* 26 End of line - multiline */
! 1973: OP_CIRC, /* 27 Start of line - not multiline */
! 1974: OP_CIRCM, /* 28 Start of line - multiline */
! 1975:
! 1976: /* Single characters; caseful must precede the caseless ones */
! 1977:
1.1 misho 1978: OP_CHAR, /* 29 Match one character, casefully */
1979: OP_CHARI, /* 30 Match one character, caselessly */
1980: OP_NOT, /* 31 Match one character, not the given one, casefully */
1981: OP_NOTI, /* 32 Match one character, not the given one, caselessly */
1982:
1983: /* The following sets of 13 opcodes must always be kept in step because
1984: the offset from the first one is used to generate the others. */
1985:
1.1.1.5 ! misho 1986: /* Repeated characters; caseful must precede the caseless ones */
1.1 misho 1987:
1988: OP_STAR, /* 33 The maximizing and minimizing versions of */
1989: OP_MINSTAR, /* 34 these six opcodes must come in pairs, with */
1990: OP_PLUS, /* 35 the minimizing one second. */
1991: OP_MINPLUS, /* 36 */
1992: OP_QUERY, /* 37 */
1993: OP_MINQUERY, /* 38 */
1994:
1995: OP_UPTO, /* 39 From 0 to n matches of one character, caseful*/
1996: OP_MINUPTO, /* 40 */
1997: OP_EXACT, /* 41 Exactly n matches */
1998:
1999: OP_POSSTAR, /* 42 Possessified star, caseful */
2000: OP_POSPLUS, /* 43 Possessified plus, caseful */
2001: OP_POSQUERY, /* 44 Posesssified query, caseful */
2002: OP_POSUPTO, /* 45 Possessified upto, caseful */
2003:
1.1.1.5 ! misho 2004: /* Repeated characters; caseless must follow the caseful ones */
1.1 misho 2005:
2006: OP_STARI, /* 46 */
2007: OP_MINSTARI, /* 47 */
2008: OP_PLUSI, /* 48 */
2009: OP_MINPLUSI, /* 49 */
2010: OP_QUERYI, /* 50 */
2011: OP_MINQUERYI, /* 51 */
2012:
2013: OP_UPTOI, /* 52 From 0 to n matches of one character, caseless */
2014: OP_MINUPTOI, /* 53 */
2015: OP_EXACTI, /* 54 */
2016:
2017: OP_POSSTARI, /* 55 Possessified star, caseless */
2018: OP_POSPLUSI, /* 56 Possessified plus, caseless */
2019: OP_POSQUERYI, /* 57 Posesssified query, caseless */
2020: OP_POSUPTOI, /* 58 Possessified upto, caseless */
2021:
1.1.1.5 ! misho 2022: /* The negated ones must follow the non-negated ones, and match them */
! 2023: /* Negated repeated character, caseful; must precede the caseless ones */
1.1 misho 2024:
2025: OP_NOTSTAR, /* 59 The maximizing and minimizing versions of */
2026: OP_NOTMINSTAR, /* 60 these six opcodes must come in pairs, with */
2027: OP_NOTPLUS, /* 61 the minimizing one second. They must be in */
2028: OP_NOTMINPLUS, /* 62 exactly the same order as those above. */
2029: OP_NOTQUERY, /* 63 */
2030: OP_NOTMINQUERY, /* 64 */
2031:
2032: OP_NOTUPTO, /* 65 From 0 to n matches, caseful */
2033: OP_NOTMINUPTO, /* 66 */
2034: OP_NOTEXACT, /* 67 Exactly n matches */
2035:
2036: OP_NOTPOSSTAR, /* 68 Possessified versions, caseful */
2037: OP_NOTPOSPLUS, /* 69 */
2038: OP_NOTPOSQUERY, /* 70 */
2039: OP_NOTPOSUPTO, /* 71 */
2040:
1.1.1.5 ! misho 2041: /* Negated repeated character, caseless; must follow the caseful ones */
1.1 misho 2042:
2043: OP_NOTSTARI, /* 72 */
2044: OP_NOTMINSTARI, /* 73 */
2045: OP_NOTPLUSI, /* 74 */
2046: OP_NOTMINPLUSI, /* 75 */
2047: OP_NOTQUERYI, /* 76 */
2048: OP_NOTMINQUERYI, /* 77 */
2049:
2050: OP_NOTUPTOI, /* 78 From 0 to n matches, caseless */
2051: OP_NOTMINUPTOI, /* 79 */
2052: OP_NOTEXACTI, /* 80 Exactly n matches */
2053:
2054: OP_NOTPOSSTARI, /* 81 Possessified versions, caseless */
2055: OP_NOTPOSPLUSI, /* 82 */
2056: OP_NOTPOSQUERYI, /* 83 */
2057: OP_NOTPOSUPTOI, /* 84 */
2058:
1.1.1.5 ! misho 2059: /* Character types */
1.1 misho 2060:
2061: OP_TYPESTAR, /* 85 The maximizing and minimizing versions of */
2062: OP_TYPEMINSTAR, /* 86 these six opcodes must come in pairs, with */
2063: OP_TYPEPLUS, /* 87 the minimizing one second. These codes must */
2064: OP_TYPEMINPLUS, /* 88 be in exactly the same order as those above. */
2065: OP_TYPEQUERY, /* 89 */
2066: OP_TYPEMINQUERY, /* 90 */
2067:
2068: OP_TYPEUPTO, /* 91 From 0 to n matches */
2069: OP_TYPEMINUPTO, /* 92 */
2070: OP_TYPEEXACT, /* 93 Exactly n matches */
2071:
2072: OP_TYPEPOSSTAR, /* 94 Possessified versions */
2073: OP_TYPEPOSPLUS, /* 95 */
2074: OP_TYPEPOSQUERY, /* 96 */
2075: OP_TYPEPOSUPTO, /* 97 */
2076:
2077: /* These are used for character classes and back references; only the
2078: first six are the same as the sets above. */
2079:
2080: OP_CRSTAR, /* 98 The maximizing and minimizing versions of */
2081: OP_CRMINSTAR, /* 99 all these opcodes must come in pairs, with */
2082: OP_CRPLUS, /* 100 the minimizing one second. These codes must */
2083: OP_CRMINPLUS, /* 101 be in exactly the same order as those above. */
2084: OP_CRQUERY, /* 102 */
2085: OP_CRMINQUERY, /* 103 */
2086:
2087: OP_CRRANGE, /* 104 These are different to the three sets above. */
2088: OP_CRMINRANGE, /* 105 */
2089:
1.1.1.5 ! misho 2090: OP_CRPOSSTAR, /* 106 Possessified versions */
! 2091: OP_CRPOSPLUS, /* 107 */
! 2092: OP_CRPOSQUERY, /* 108 */
! 2093: OP_CRPOSRANGE, /* 109 */
! 2094:
1.1 misho 2095: /* End of quantifier opcodes */
2096:
1.1.1.5 ! misho 2097: OP_CLASS, /* 110 Match a character class, chars < 256 only */
! 2098: OP_NCLASS, /* 111 Same, but the bitmap was created from a negative
1.1 misho 2099: class - the difference is relevant only when a
1.1.1.2 misho 2100: character > 255 is encountered. */
1.1.1.5 ! misho 2101: OP_XCLASS, /* 112 Extended class for handling > 255 chars within the
1.1 misho 2102: class. This does both positive and negative. */
1.1.1.5 ! misho 2103: OP_REF, /* 113 Match a back reference, casefully */
! 2104: OP_REFI, /* 114 Match a back reference, caselessly */
! 2105: OP_DNREF, /* 115 Match a duplicate name backref, casefully */
! 2106: OP_DNREFI, /* 116 Match a duplicate name backref, caselessly */
! 2107: OP_RECURSE, /* 117 Match a numbered subpattern (possibly recursive) */
! 2108: OP_CALLOUT, /* 118 Call out to external function if provided */
! 2109:
! 2110: OP_ALT, /* 119 Start of alternation */
! 2111: OP_KET, /* 120 End of group that doesn't have an unbounded repeat */
! 2112: OP_KETRMAX, /* 121 These two must remain together and in this */
! 2113: OP_KETRMIN, /* 122 order. They are for groups the repeat for ever. */
! 2114: OP_KETRPOS, /* 123 Possessive unlimited repeat. */
1.1 misho 2115:
2116: /* The assertions must come before BRA, CBRA, ONCE, and COND, and the four
2117: asserts must remain in order. */
2118:
1.1.1.5 ! misho 2119: OP_REVERSE, /* 124 Move pointer back - used in lookbehind assertions */
! 2120: OP_ASSERT, /* 125 Positive lookahead */
! 2121: OP_ASSERT_NOT, /* 126 Negative lookahead */
! 2122: OP_ASSERTBACK, /* 127 Positive lookbehind */
! 2123: OP_ASSERTBACK_NOT, /* 128 Negative lookbehind */
1.1 misho 2124:
2125: /* ONCE, ONCE_NC, BRA, BRAPOS, CBRA, CBRAPOS, and COND must come immediately
2126: after the assertions, with ONCE first, as there's a test for >= ONCE for a
2127: subpattern that isn't an assertion. The POS versions must immediately follow
2128: the non-POS versions in each case. */
2129:
1.1.1.5 ! misho 2130: OP_ONCE, /* 129 Atomic group, contains captures */
! 2131: OP_ONCE_NC, /* 130 Atomic group containing no captures */
! 2132: OP_BRA, /* 131 Start of non-capturing bracket */
! 2133: OP_BRAPOS, /* 132 Ditto, with unlimited, possessive repeat */
! 2134: OP_CBRA, /* 133 Start of capturing bracket */
! 2135: OP_CBRAPOS, /* 134 Ditto, with unlimited, possessive repeat */
! 2136: OP_COND, /* 135 Conditional group */
1.1 misho 2137:
2138: /* These five must follow the previous five, in the same order. There's a
2139: check for >= SBRA to distinguish the two sets. */
2140:
1.1.1.5 ! misho 2141: OP_SBRA, /* 136 Start of non-capturing bracket, check empty */
! 2142: OP_SBRAPOS, /* 137 Ditto, with unlimited, possessive repeat */
! 2143: OP_SCBRA, /* 138 Start of capturing bracket, check empty */
! 2144: OP_SCBRAPOS, /* 139 Ditto, with unlimited, possessive repeat */
! 2145: OP_SCOND, /* 140 Conditional group, check empty */
1.1 misho 2146:
2147: /* The next two pairs must (respectively) be kept together. */
2148:
1.1.1.5 ! misho 2149: OP_CREF, /* 141 Used to hold a capture number as condition */
! 2150: OP_DNCREF, /* 142 Used to point to duplicate names as a condition */
! 2151: OP_RREF, /* 143 Used to hold a recursion number as condition */
! 2152: OP_DNRREF, /* 144 Used to point to duplicate names as a condition */
! 2153: OP_DEF, /* 145 The DEFINE condition */
! 2154:
! 2155: OP_BRAZERO, /* 146 These two must remain together and in this */
! 2156: OP_BRAMINZERO, /* 147 order. */
! 2157: OP_BRAPOSZERO, /* 148 */
1.1 misho 2158:
2159: /* These are backtracking control verbs */
2160:
1.1.1.5 ! misho 2161: OP_MARK, /* 149 always has an argument */
! 2162: OP_PRUNE, /* 150 */
! 2163: OP_PRUNE_ARG, /* 151 same, but with argument */
! 2164: OP_SKIP, /* 152 */
! 2165: OP_SKIP_ARG, /* 153 same, but with argument */
! 2166: OP_THEN, /* 154 */
! 2167: OP_THEN_ARG, /* 155 same, but with argument */
! 2168: OP_COMMIT, /* 156 */
1.1 misho 2169:
2170: /* These are forced failure and success verbs */
2171:
1.1.1.5 ! misho 2172: OP_FAIL, /* 157 */
! 2173: OP_ACCEPT, /* 158 */
! 2174: OP_ASSERT_ACCEPT, /* 159 Used inside assertions */
! 2175: OP_CLOSE, /* 160 Used before OP_ACCEPT to close open captures */
1.1 misho 2176:
2177: /* This is used to skip a subpattern with a {0} quantifier */
2178:
1.1.1.5 ! misho 2179: OP_SKIPZERO, /* 161 */
1.1 misho 2180:
2181: /* This is not an opcode, but is used to check that tables indexed by opcode
2182: are the correct length, in order to catch updating errors - there have been
2183: some in the past. */
2184:
2185: OP_TABLE_LENGTH
2186: };
2187:
2188: /* *** NOTE NOTE NOTE *** Whenever the list above is updated, the two macro
2189: definitions that follow must also be updated to match. There are also tables
1.1.1.5 ! misho 2190: called "opcode_possessify" in pcre_compile.c and "coptable" and "poptable" in
! 2191: pcre_dfa_exec.c that must be updated. */
1.1 misho 2192:
2193:
2194: /* This macro defines textual names for all the opcodes. These are used only
2195: for debugging, and some of them are only partial names. The macro is referenced
2196: only in pcre_printint.c, which fills out the full names in many cases (and in
2197: some cases doesn't actually use these names at all). */
2198:
2199: #define OP_NAME_LIST \
2200: "End", "\\A", "\\G", "\\K", "\\B", "\\b", "\\D", "\\d", \
2201: "\\S", "\\s", "\\W", "\\w", "Any", "AllAny", "Anybyte", \
2202: "notprop", "prop", "\\R", "\\H", "\\h", "\\V", "\\v", \
2203: "extuni", "\\Z", "\\z", \
1.1.1.5 ! misho 2204: "$", "$", "^", "^", "char", "chari", "not", "noti", \
1.1 misho 2205: "*", "*?", "+", "+?", "?", "??", \
2206: "{", "{", "{", \
2207: "*+","++", "?+", "{", \
2208: "*", "*?", "+", "+?", "?", "??", \
2209: "{", "{", "{", \
2210: "*+","++", "?+", "{", \
2211: "*", "*?", "+", "+?", "?", "??", \
2212: "{", "{", "{", \
2213: "*+","++", "?+", "{", \
2214: "*", "*?", "+", "+?", "?", "??", \
2215: "{", "{", "{", \
2216: "*+","++", "?+", "{", \
2217: "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \
2218: "*+","++", "?+", "{", \
2219: "*", "*?", "+", "+?", "?", "??", "{", "{", \
1.1.1.5 ! misho 2220: "*+","++", "?+", "{", \
! 2221: "class", "nclass", "xclass", "Ref", "Refi", "DnRef", "DnRefi", \
1.1 misho 2222: "Recurse", "Callout", \
2223: "Alt", "Ket", "KetRmax", "KetRmin", "KetRpos", \
2224: "Reverse", "Assert", "Assert not", "AssertB", "AssertB not", \
2225: "Once", "Once_NC", \
2226: "Bra", "BraPos", "CBra", "CBraPos", \
2227: "Cond", \
2228: "SBra", "SBraPos", "SCBra", "SCBraPos", \
2229: "SCond", \
1.1.1.5 ! misho 2230: "Cond ref", "Cond dnref", "Cond rec", "Cond dnrec", "Cond def", \
1.1 misho 2231: "Brazero", "Braminzero", "Braposzero", \
2232: "*MARK", "*PRUNE", "*PRUNE", "*SKIP", "*SKIP", \
2233: "*THEN", "*THEN", "*COMMIT", "*FAIL", \
2234: "*ACCEPT", "*ASSERT_ACCEPT", \
2235: "Close", "Skip zero"
2236:
2237:
2238: /* This macro defines the length of fixed length operations in the compiled
2239: regex. The lengths are used when searching for specific things, and also in the
2240: debugging printing of a compiled regex. We use a macro so that it can be
2241: defined close to the definitions of the opcodes themselves.
2242:
2243: As things have been extended, some of these are no longer fixed lenths, but are
2244: minima instead. For example, the length of a single-character repeat may vary
2245: in UTF-8 mode. The code that uses this table must know about such things. */
2246:
2247: #define OP_LENGTHS \
2248: 1, /* End */ \
2249: 1, 1, 1, 1, 1, /* \A, \G, \K, \B, \b */ \
2250: 1, 1, 1, 1, 1, 1, /* \D, \d, \S, \s, \W, \w */ \
2251: 1, 1, 1, /* Any, AllAny, Anybyte */ \
2252: 3, 3, /* \P, \p */ \
2253: 1, 1, 1, 1, 1, /* \R, \H, \h, \V, \v */ \
2254: 1, /* \X */ \
1.1.1.5 ! misho 2255: 1, 1, 1, 1, 1, 1, /* \Z, \z, $, $M ^, ^M */ \
1.1 misho 2256: 2, /* Char - the minimum length */ \
2257: 2, /* Chari - the minimum length */ \
2258: 2, /* not */ \
2259: 2, /* noti */ \
2260: /* Positive single-char repeats ** These are */ \
2261: 2, 2, 2, 2, 2, 2, /* *, *?, +, +?, ?, ?? ** minima in */ \
1.1.1.2 misho 2262: 2+IMM2_SIZE, 2+IMM2_SIZE, /* upto, minupto ** mode */ \
2263: 2+IMM2_SIZE, /* exact */ \
2264: 2, 2, 2, 2+IMM2_SIZE, /* *+, ++, ?+, upto+ */ \
1.1 misho 2265: 2, 2, 2, 2, 2, 2, /* *I, *?I, +I, +?I, ?I, ??I ** UTF-8 */ \
1.1.1.2 misho 2266: 2+IMM2_SIZE, 2+IMM2_SIZE, /* upto I, minupto I */ \
2267: 2+IMM2_SIZE, /* exact I */ \
2268: 2, 2, 2, 2+IMM2_SIZE, /* *+I, ++I, ?+I, upto+I */ \
1.1 misho 2269: /* Negative single-char repeats - only for chars < 256 */ \
2270: 2, 2, 2, 2, 2, 2, /* NOT *, *?, +, +?, ?, ?? */ \
1.1.1.2 misho 2271: 2+IMM2_SIZE, 2+IMM2_SIZE, /* NOT upto, minupto */ \
2272: 2+IMM2_SIZE, /* NOT exact */ \
2273: 2, 2, 2, 2+IMM2_SIZE, /* Possessive NOT *, +, ?, upto */ \
1.1 misho 2274: 2, 2, 2, 2, 2, 2, /* NOT *I, *?I, +I, +?I, ?I, ??I */ \
1.1.1.2 misho 2275: 2+IMM2_SIZE, 2+IMM2_SIZE, /* NOT upto I, minupto I */ \
2276: 2+IMM2_SIZE, /* NOT exact I */ \
2277: 2, 2, 2, 2+IMM2_SIZE, /* Possessive NOT *I, +I, ?I, upto I */ \
1.1 misho 2278: /* Positive type repeats */ \
2279: 2, 2, 2, 2, 2, 2, /* Type *, *?, +, +?, ?, ?? */ \
1.1.1.2 misho 2280: 2+IMM2_SIZE, 2+IMM2_SIZE, /* Type upto, minupto */ \
2281: 2+IMM2_SIZE, /* Type exact */ \
2282: 2, 2, 2, 2+IMM2_SIZE, /* Possessive *+, ++, ?+, upto+ */ \
1.1 misho 2283: /* Character class & ref repeats */ \
2284: 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ \
1.1.1.2 misho 2285: 1+2*IMM2_SIZE, 1+2*IMM2_SIZE, /* CRRANGE, CRMINRANGE */ \
1.1.1.5 ! misho 2286: 1, 1, 1, 1+2*IMM2_SIZE, /* Possessive *+, ++, ?+, CRPOSRANGE */ \
1.1.1.2 misho 2287: 1+(32/sizeof(pcre_uchar)), /* CLASS */ \
2288: 1+(32/sizeof(pcre_uchar)), /* NCLASS */ \
1.1 misho 2289: 0, /* XCLASS - variable length */ \
1.1.1.2 misho 2290: 1+IMM2_SIZE, /* REF */ \
2291: 1+IMM2_SIZE, /* REFI */ \
1.1.1.5 ! misho 2292: 1+2*IMM2_SIZE, /* DNREF */ \
! 2293: 1+2*IMM2_SIZE, /* DNREFI */ \
1.1 misho 2294: 1+LINK_SIZE, /* RECURSE */ \
2295: 2+2*LINK_SIZE, /* CALLOUT */ \
2296: 1+LINK_SIZE, /* Alt */ \
2297: 1+LINK_SIZE, /* Ket */ \
2298: 1+LINK_SIZE, /* KetRmax */ \
2299: 1+LINK_SIZE, /* KetRmin */ \
2300: 1+LINK_SIZE, /* KetRpos */ \
2301: 1+LINK_SIZE, /* Reverse */ \
2302: 1+LINK_SIZE, /* Assert */ \
2303: 1+LINK_SIZE, /* Assert not */ \
2304: 1+LINK_SIZE, /* Assert behind */ \
2305: 1+LINK_SIZE, /* Assert behind not */ \
2306: 1+LINK_SIZE, /* ONCE */ \
2307: 1+LINK_SIZE, /* ONCE_NC */ \
2308: 1+LINK_SIZE, /* BRA */ \
2309: 1+LINK_SIZE, /* BRAPOS */ \
1.1.1.2 misho 2310: 1+LINK_SIZE+IMM2_SIZE, /* CBRA */ \
2311: 1+LINK_SIZE+IMM2_SIZE, /* CBRAPOS */ \
1.1 misho 2312: 1+LINK_SIZE, /* COND */ \
2313: 1+LINK_SIZE, /* SBRA */ \
2314: 1+LINK_SIZE, /* SBRAPOS */ \
1.1.1.2 misho 2315: 1+LINK_SIZE+IMM2_SIZE, /* SCBRA */ \
2316: 1+LINK_SIZE+IMM2_SIZE, /* SCBRAPOS */ \
1.1 misho 2317: 1+LINK_SIZE, /* SCOND */ \
1.1.1.5 ! misho 2318: 1+IMM2_SIZE, 1+2*IMM2_SIZE, /* CREF, DNCREF */ \
! 2319: 1+IMM2_SIZE, 1+2*IMM2_SIZE, /* RREF, DNRREF */ \
1.1 misho 2320: 1, /* DEF */ \
2321: 1, 1, 1, /* BRAZERO, BRAMINZERO, BRAPOSZERO */ \
2322: 3, 1, 3, /* MARK, PRUNE, PRUNE_ARG */ \
2323: 1, 3, /* SKIP, SKIP_ARG */ \
2324: 1, 3, /* THEN, THEN_ARG */ \
2325: 1, 1, 1, 1, /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT */ \
1.1.1.2 misho 2326: 1+IMM2_SIZE, 1 /* CLOSE, SKIPZERO */
1.1 misho 2327:
1.1.1.5 ! misho 2328: /* A magic value for OP_RREF to indicate the "any recursion" condition. */
1.1 misho 2329:
2330: #define RREF_ANY 0xffff
2331:
2332: /* Compile time error code numbers. They are given names so that they can more
2333: easily be tracked. When a new number is added, the table called eint in
2334: pcreposix.c must be updated. */
2335:
2336: enum { ERR0, ERR1, ERR2, ERR3, ERR4, ERR5, ERR6, ERR7, ERR8, ERR9,
2337: ERR10, ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19,
2338: ERR20, ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR28, ERR29,
2339: ERR30, ERR31, ERR32, ERR33, ERR34, ERR35, ERR36, ERR37, ERR38, ERR39,
2340: ERR40, ERR41, ERR42, ERR43, ERR44, ERR45, ERR46, ERR47, ERR48, ERR49,
2341: ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59,
2342: ERR60, ERR61, ERR62, ERR63, ERR64, ERR65, ERR66, ERR67, ERR68, ERR69,
1.1.1.5 ! misho 2343: ERR70, ERR71, ERR72, ERR73, ERR74, ERR75, ERR76, ERR77, ERR78, ERR79,
! 2344: ERR80, ERR81, ERR82, ERR83, ERR84, ERRCOUNT };
1.1.1.3 misho 2345:
2346: /* JIT compiling modes. The function list is indexed by them. */
1.1.1.5 ! misho 2347:
1.1.1.3 misho 2348: enum { JIT_COMPILE, JIT_PARTIAL_SOFT_COMPILE, JIT_PARTIAL_HARD_COMPILE,
2349: JIT_NUMBER_OF_COMPILE_MODES };
1.1 misho 2350:
2351: /* The real format of the start of the pcre block; the index of names and the
2352: code vector run on as long as necessary after the end. We store an explicit
2353: offset to the name table so that if a regex is compiled on one host, saved, and
2354: then run on another where the size of pointers is different, all might still
1.1.1.4 misho 2355: be well.
2356:
2357: The size of the structure must be a multiple of 8 bytes. For the case of
2358: compiled-on-4 and run-on-8, we include an extra pointer that is always NULL so
2359: that there are an even number of pointers which therefore are a multiple of 8
2360: bytes.
2361:
2362: It is necessary to fork the struct for the 32 bit library, since it needs to
2363: use pcre_uint32 for first_char and req_char. We can't put an ifdef inside the
2364: typedef because pcretest needs access to the struct of the 8-, 16- and 32-bit
2365: variants.
2366:
2367: *** WARNING ***
2368: When new fields are added to these structures, remember to adjust the code in
2369: pcre_byte_order.c that is concerned with swapping the byte order of the fields
2370: when a compiled regex is reloaded on a host with different endianness.
2371: *** WARNING ***
2372: There is also similar byte-flipping code in pcretest.c, which is used for
2373: testing the byte-flipping features. It must also be kept in step.
2374: *** WARNING ***
1.1 misho 2375: */
2376:
1.1.1.4 misho 2377: typedef struct real_pcre8_or_16 {
2378: pcre_uint32 magic_number;
2379: pcre_uint32 size; /* Total that was malloced */
2380: pcre_uint32 options; /* Public options */
2381: pcre_uint32 flags; /* Private flags */
2382: pcre_uint32 limit_match; /* Limit set from regex */
2383: pcre_uint32 limit_recursion; /* Limit set from regex */
2384: pcre_uint16 first_char; /* Starting character */
2385: pcre_uint16 req_char; /* This character must be seen */
2386: pcre_uint16 max_lookbehind; /* Longest lookbehind (characters) */
2387: pcre_uint16 top_bracket; /* Highest numbered group */
2388: pcre_uint16 top_backref; /* Highest numbered back reference */
2389: pcre_uint16 name_table_offset; /* Offset to name table that follows */
2390: pcre_uint16 name_entry_size; /* Size of any name items */
2391: pcre_uint16 name_count; /* Number of name items */
2392: pcre_uint16 ref_count; /* Reference count */
2393: pcre_uint16 dummy1; /* To ensure size is a multiple of 8 */
2394: pcre_uint16 dummy2; /* To ensure size is a multiple of 8 */
2395: pcre_uint16 dummy3; /* To ensure size is a multiple of 8 */
2396: const pcre_uint8 *tables; /* Pointer to tables or NULL for std */
2397: void *nullpad; /* NULL padding */
2398: } real_pcre8_or_16;
1.1.1.2 misho 2399:
1.1.1.4 misho 2400: typedef struct real_pcre8_or_16 real_pcre;
2401: typedef struct real_pcre8_or_16 real_pcre16;
2402:
2403: typedef struct real_pcre32 {
1.1 misho 2404: pcre_uint32 magic_number;
2405: pcre_uint32 size; /* Total that was malloced */
2406: pcre_uint32 options; /* Public options */
1.1.1.4 misho 2407: pcre_uint32 flags; /* Private flags */
2408: pcre_uint32 limit_match; /* Limit set from regex */
2409: pcre_uint32 limit_recursion; /* Limit set from regex */
2410: pcre_uint32 first_char; /* Starting character */
2411: pcre_uint32 req_char; /* This character must be seen */
1.1.1.3 misho 2412: pcre_uint16 max_lookbehind; /* Longest lookbehind (characters) */
2413: pcre_uint16 top_bracket; /* Highest numbered group */
2414: pcre_uint16 top_backref; /* Highest numbered back reference */
1.1 misho 2415: pcre_uint16 name_table_offset; /* Offset to name table that follows */
2416: pcre_uint16 name_entry_size; /* Size of any name items */
2417: pcre_uint16 name_count; /* Number of name items */
2418: pcre_uint16 ref_count; /* Reference count */
1.1.1.4 misho 2419: pcre_uint16 dummy; /* To ensure size is a multiple of 8 */
1.1.1.2 misho 2420: const pcre_uint8 *tables; /* Pointer to tables or NULL for std */
1.1.1.4 misho 2421: void *nullpad; /* NULL padding */
2422: } real_pcre32;
2423:
2424: #if defined COMPILE_PCRE8
2425: #define REAL_PCRE real_pcre
2426: #elif defined COMPILE_PCRE16
2427: #define REAL_PCRE real_pcre16
2428: #elif defined COMPILE_PCRE32
2429: #define REAL_PCRE real_pcre32
2430: #endif
2431:
2432: /* Assert that the size of REAL_PCRE is divisible by 8 */
2433: typedef int __assert_real_pcre_size_divisible_8[(sizeof(REAL_PCRE) % 8) == 0 ? 1 : -1];
2434:
2435: /* Needed in pcretest to access some fields in the real_pcre* structures
2436: * directly. They're unified for 8/16/32 bits since the structs only differ
2437: * after these fields; if that ever changes, need to fork those defines into
2438: * 8/16 and 32 bit versions. */
2439: #define REAL_PCRE_MAGIC(re) (((REAL_PCRE*)re)->magic_number)
2440: #define REAL_PCRE_SIZE(re) (((REAL_PCRE*)re)->size)
2441: #define REAL_PCRE_OPTIONS(re) (((REAL_PCRE*)re)->options)
2442: #define REAL_PCRE_FLAGS(re) (((REAL_PCRE*)re)->flags)
1.1 misho 2443:
2444: /* The format of the block used to store data from pcre_study(). The same
2445: remark (see NOTE above) about extending this structure applies. */
2446:
2447: typedef struct pcre_study_data {
2448: pcre_uint32 size; /* Total that was malloced */
2449: pcre_uint32 flags; /* Private flags */
1.1.1.2 misho 2450: pcre_uint8 start_bits[32]; /* Starting char bits */
1.1 misho 2451: pcre_uint32 minlength; /* Minimum subject length */
2452: } pcre_study_data;
2453:
2454: /* Structure for building a chain of open capturing subpatterns during
2455: compiling, so that instructions to close them can be compiled when (*ACCEPT) is
2456: encountered. This is also used to identify subpatterns that contain recursive
2457: back references to themselves, so that they can be made atomic. */
2458:
2459: typedef struct open_capitem {
2460: struct open_capitem *next; /* Chain link */
2461: pcre_uint16 number; /* Capture number */
2462: pcre_uint16 flag; /* Set TRUE if recursive back ref */
2463: } open_capitem;
2464:
1.1.1.5 ! misho 2465: /* Structure for building a list of named groups during the first pass of
! 2466: compiling. */
! 2467:
! 2468: typedef struct named_group {
! 2469: const pcre_uchar *name; /* Points to the name in the pattern */
! 2470: int length; /* Length of the name */
! 2471: pcre_uint32 number; /* Group number */
! 2472: } named_group;
! 2473:
1.1 misho 2474: /* Structure for passing "static" information around between the functions
2475: doing the compiling, so that they are thread-safe. */
2476:
2477: typedef struct compile_data {
1.1.1.2 misho 2478: const pcre_uint8 *lcc; /* Points to lower casing table */
2479: const pcre_uint8 *fcc; /* Points to case-flipping table */
2480: const pcre_uint8 *cbits; /* Points to character type table */
2481: const pcre_uint8 *ctypes; /* Points to table of type maps */
2482: const pcre_uchar *start_workspace;/* The start of working space */
2483: const pcre_uchar *start_code; /* The start of the compiled code */
2484: const pcre_uchar *start_pattern; /* The start of the pattern */
2485: const pcre_uchar *end_pattern; /* The end of the pattern */
2486: pcre_uchar *hwm; /* High watermark of workspace */
1.1.1.5 ! misho 2487: open_capitem *open_caps; /* Chain of open capture items */
! 2488: named_group *named_groups; /* Points to vector in pre-compile */
1.1.1.2 misho 2489: pcre_uchar *name_table; /* The name/number table */
2490: int names_found; /* Number of entries so far */
2491: int name_entry_size; /* Size of each entry */
1.1.1.5 ! misho 2492: int named_group_list_size; /* Number of entries in the list */
1.1.1.2 misho 2493: int workspace_size; /* Size of workspace */
1.1.1.4 misho 2494: unsigned int bracount; /* Count of capturing parens as we compile */
1.1.1.2 misho 2495: int final_bracount; /* Saved value after first pass */
1.1.1.3 misho 2496: int max_lookbehind; /* Maximum lookbehind (characters) */
1.1.1.2 misho 2497: int top_backref; /* Maximum back reference */
2498: unsigned int backref_map; /* Bitmap of low back refs */
1.1.1.5 ! misho 2499: unsigned int namedrefcount; /* Number of backreferences by name */
! 2500: int parens_depth; /* Depth of nested parentheses */
1.1.1.2 misho 2501: int assert_depth; /* Depth of nested assertions */
1.1.1.4 misho 2502: pcre_uint32 external_options; /* External (initial) options */
2503: pcre_uint32 external_flags; /* External flag bits to be set */
1.1.1.2 misho 2504: int req_varyopt; /* "After variable item" flag for reqbyte */
2505: BOOL had_accept; /* (*ACCEPT) encountered */
1.1.1.4 misho 2506: BOOL had_pruneorskip; /* (*PRUNE) or (*SKIP) encountered */
1.1.1.2 misho 2507: BOOL check_lookbehind; /* Lookbehinds need later checking */
1.1.1.5 ! misho 2508: BOOL dupnames; /* Duplicate names exist */
1.1.1.2 misho 2509: int nltype; /* Newline type */
2510: int nllen; /* Newline string length */
2511: pcre_uchar nl[4]; /* Newline string when fixed length */
1.1 misho 2512: } compile_data;
2513:
2514: /* Structure for maintaining a chain of pointers to the currently incomplete
2515: branches, for testing for left recursion while compiling. */
2516:
2517: typedef struct branch_chain {
2518: struct branch_chain *outer;
1.1.1.2 misho 2519: pcre_uchar *current_branch;
1.1 misho 2520: } branch_chain;
2521:
2522: /* Structure for items in a linked list that represents an explicit recursive
2523: call within the pattern; used by pcre_exec(). */
2524:
2525: typedef struct recursion_info {
2526: struct recursion_info *prevrec; /* Previous recursion record (or NULL) */
1.1.1.4 misho 2527: unsigned int group_num; /* Number of group that was called */
1.1 misho 2528: int *offset_save; /* Pointer to start of saved offsets */
2529: int saved_max; /* Number of saved offsets */
1.1.1.4 misho 2530: int saved_capture_last; /* Last capture number */
1.1.1.2 misho 2531: PCRE_PUCHAR subject_position; /* Position at start of recursion */
1.1 misho 2532: } recursion_info;
2533:
2534: /* A similar structure for pcre_dfa_exec(). */
2535:
2536: typedef struct dfa_recursion_info {
2537: struct dfa_recursion_info *prevrec;
2538: int group_num;
1.1.1.2 misho 2539: PCRE_PUCHAR subject_position;
1.1 misho 2540: } dfa_recursion_info;
2541:
2542: /* Structure for building a chain of data for holding the values of the subject
2543: pointer at the start of each subpattern, so as to detect when an empty string
2544: has been matched by a subpattern - to break infinite loops; used by
2545: pcre_exec(). */
2546:
2547: typedef struct eptrblock {
2548: struct eptrblock *epb_prev;
1.1.1.2 misho 2549: PCRE_PUCHAR epb_saved_eptr;
1.1 misho 2550: } eptrblock;
2551:
2552:
2553: /* Structure for passing "static" information around between the functions
2554: doing traditional NFA matching, so that they are thread-safe. */
2555:
2556: typedef struct match_data {
2557: unsigned long int match_call_count; /* As it says */
2558: unsigned long int match_limit; /* As it says */
2559: unsigned long int match_limit_recursion; /* As it says */
1.1.1.2 misho 2560: int *offset_vector; /* Offset vector */
2561: int offset_end; /* One past the end */
2562: int offset_max; /* The maximum usable for return data */
2563: int nltype; /* Newline type */
2564: int nllen; /* Newline string length */
2565: int name_count; /* Number of names in name table */
2566: int name_entry_size; /* Size of entry in names table */
1.1.1.4 misho 2567: unsigned int skip_arg_count; /* For counting SKIP_ARGs */
2568: unsigned int ignore_skip_arg; /* For re-run when SKIP arg name not found */
1.1.1.2 misho 2569: pcre_uchar *name_table; /* Table of names */
2570: pcre_uchar nl[4]; /* Newline string when fixed */
2571: const pcre_uint8 *lcc; /* Points to lower casing table */
2572: const pcre_uint8 *fcc; /* Points to case-flipping table */
2573: const pcre_uint8 *ctypes; /* Points to table of type maps */
2574: BOOL notbol; /* NOTBOL flag */
2575: BOOL noteol; /* NOTEOL flag */
2576: BOOL utf; /* UTF-8 / UTF-16 flag */
2577: BOOL jscript_compat; /* JAVASCRIPT_COMPAT flag */
2578: BOOL use_ucp; /* PCRE_UCP flag */
2579: BOOL endonly; /* Dollar not before final \n */
2580: BOOL notempty; /* Empty string match not wanted */
2581: BOOL notempty_atstart; /* Empty string match at start not wanted */
2582: BOOL hitend; /* Hit the end of the subject at some point */
2583: BOOL bsr_anycrlf; /* \R is just any CRLF, not full Unicode */
2584: BOOL hasthen; /* Pattern contains (*THEN) */
2585: const pcre_uchar *start_code; /* For use when recursing */
2586: PCRE_PUCHAR start_subject; /* Start of the subject string */
2587: PCRE_PUCHAR end_subject; /* End of the subject string */
2588: PCRE_PUCHAR start_match_ptr; /* Start of matched string */
2589: PCRE_PUCHAR end_match_ptr; /* Subject position at end match */
2590: PCRE_PUCHAR start_used_ptr; /* Earliest consulted character */
2591: int partial; /* PARTIAL options */
2592: int end_offset_top; /* Highwater mark at end of match */
1.1.1.4 misho 2593: pcre_int32 capture_last; /* Most recent capture number + overflow flag */
1.1.1.2 misho 2594: int start_offset; /* The start offset value */
2595: int match_function_type; /* Set for certain special calls of MATCH() */
2596: eptrblock *eptrchain; /* Chain of eptrblocks for tail recursions */
2597: int eptrn; /* Next free eptrblock */
2598: recursion_info *recursive; /* Linked list of recursion data */
2599: void *callout_data; /* To pass back to callouts */
2600: const pcre_uchar *mark; /* Mark pointer to pass back on success */
2601: const pcre_uchar *nomatch_mark;/* Mark pointer to pass back on failure */
2602: const pcre_uchar *once_target; /* Where to back up to for atomic groups */
1.1.1.3 misho 2603: #ifdef NO_RECURSE
2604: void *match_frames_base; /* For remembering malloc'd frames */
2605: #endif
1.1 misho 2606: } match_data;
2607:
2608: /* A similar structure is used for the same purpose by the DFA matching
2609: functions. */
2610:
2611: typedef struct dfa_match_data {
1.1.1.2 misho 2612: const pcre_uchar *start_code; /* Start of the compiled pattern */
2613: const pcre_uchar *start_subject ; /* Start of the subject string */
2614: const pcre_uchar *end_subject; /* End of subject string */
2615: const pcre_uchar *start_used_ptr; /* Earliest consulted character */
2616: const pcre_uint8 *tables; /* Character tables */
2617: int start_offset; /* The start offset value */
2618: int moptions; /* Match options */
2619: int poptions; /* Pattern options */
2620: int nltype; /* Newline type */
2621: int nllen; /* Newline string length */
2622: pcre_uchar nl[4]; /* Newline string when fixed */
2623: void *callout_data; /* To pass back to callouts */
2624: dfa_recursion_info *recursive; /* Linked list of recursion data */
1.1 misho 2625: } dfa_match_data;
2626:
2627: /* Bit definitions for entries in the pcre_ctypes table. */
2628:
2629: #define ctype_space 0x01
2630: #define ctype_letter 0x02
2631: #define ctype_digit 0x04
2632: #define ctype_xdigit 0x08
2633: #define ctype_word 0x10 /* alphanumeric or '_' */
2634: #define ctype_meta 0x80 /* regexp meta char or zero (end pattern) */
2635:
2636: /* Offsets for the bitmap tables in pcre_cbits. Each table contains a set
2637: of bits for a class map. Some classes are built by combining these tables. */
2638:
2639: #define cbit_space 0 /* [:space:] or \s */
2640: #define cbit_xdigit 32 /* [:xdigit:] */
2641: #define cbit_digit 64 /* [:digit:] or \d */
2642: #define cbit_upper 96 /* [:upper:] */
2643: #define cbit_lower 128 /* [:lower:] */
2644: #define cbit_word 160 /* [:word:] or \w */
2645: #define cbit_graph 192 /* [:graph:] */
2646: #define cbit_print 224 /* [:print:] */
2647: #define cbit_punct 256 /* [:punct:] */
2648: #define cbit_cntrl 288 /* [:cntrl:] */
2649: #define cbit_length 320 /* Length of the cbits table */
2650:
2651: /* Offsets of the various tables from the base tables pointer, and
2652: total length. */
2653:
2654: #define lcc_offset 0
2655: #define fcc_offset 256
2656: #define cbits_offset 512
2657: #define ctypes_offset (cbits_offset + cbit_length)
2658: #define tables_length (ctypes_offset + 256)
2659:
1.1.1.3 misho 2660: /* Internal function and data prefixes. */
1.1.1.2 misho 2661:
1.1.1.4 misho 2662: #if defined COMPILE_PCRE8
1.1.1.2 misho 2663: #ifndef PUBL
2664: #define PUBL(name) pcre_##name
2665: #endif
2666: #ifndef PRIV
2667: #define PRIV(name) _pcre_##name
2668: #endif
1.1.1.4 misho 2669: #elif defined COMPILE_PCRE16
1.1.1.2 misho 2670: #ifndef PUBL
2671: #define PUBL(name) pcre16_##name
2672: #endif
2673: #ifndef PRIV
2674: #define PRIV(name) _pcre16_##name
2675: #endif
1.1.1.4 misho 2676: #elif defined COMPILE_PCRE32
2677: #ifndef PUBL
2678: #define PUBL(name) pcre32_##name
2679: #endif
2680: #ifndef PRIV
2681: #define PRIV(name) _pcre32_##name
2682: #endif
1.1.1.2 misho 2683: #else
2684: #error Unsupported compiling mode
1.1.1.4 misho 2685: #endif /* COMPILE_PCRE[8|16|32] */
1.1.1.2 misho 2686:
1.1 misho 2687: /* Layout of the UCP type table that translates property names into types and
2688: codes. Each entry used to point directly to a name, but to reduce the number of
2689: relocations in shared libraries, it now has an offset into a single string
2690: instead. */
2691:
2692: typedef struct {
2693: pcre_uint16 name_offset;
2694: pcre_uint16 type;
2695: pcre_uint16 value;
2696: } ucp_type_table;
2697:
2698:
2699: /* Internal shared data tables. These are tables that are used by more than one
2700: of the exported public functions. They have to be "external" in the C sense,
2701: but are not part of the PCRE public API. The data for these tables is in the
2702: pcre_tables.c module. */
2703:
1.1.1.2 misho 2704: #ifdef COMPILE_PCRE8
2705: extern const int PRIV(utf8_table1)[];
2706: extern const int PRIV(utf8_table1_size);
2707: extern const int PRIV(utf8_table2)[];
2708: extern const int PRIV(utf8_table3)[];
2709: extern const pcre_uint8 PRIV(utf8_table4)[];
2710: #endif /* COMPILE_PCRE8 */
1.1 misho 2711:
1.1.1.2 misho 2712: extern const char PRIV(utt_names)[];
2713: extern const ucp_type_table PRIV(utt)[];
2714: extern const int PRIV(utt_size);
1.1 misho 2715:
1.1.1.4 misho 2716: extern const pcre_uint8 PRIV(OP_lengths)[];
1.1.1.2 misho 2717: extern const pcre_uint8 PRIV(default_tables)[];
1.1 misho 2718:
1.1.1.4 misho 2719: extern const pcre_uint32 PRIV(hspace_list)[];
2720: extern const pcre_uint32 PRIV(vspace_list)[];
1.1 misho 2721:
2722:
2723: /* Internal shared functions. These are functions that are used by more than
2724: one of the exported public functions. They have to be "external" in the C
2725: sense, but are not part of the PCRE public API. */
2726:
1.1.1.2 misho 2727: /* String comparison functions. */
1.1.1.4 misho 2728: #if defined COMPILE_PCRE8
1.1.1.2 misho 2729:
2730: #define STRCMP_UC_UC(str1, str2) \
2731: strcmp((char *)(str1), (char *)(str2))
2732: #define STRCMP_UC_C8(str1, str2) \
2733: strcmp((char *)(str1), (str2))
2734: #define STRNCMP_UC_UC(str1, str2, num) \
2735: strncmp((char *)(str1), (char *)(str2), (num))
2736: #define STRNCMP_UC_C8(str1, str2, num) \
2737: strncmp((char *)(str1), (str2), (num))
2738: #define STRLEN_UC(str) strlen((const char *)str)
2739:
1.1.1.4 misho 2740: #elif defined COMPILE_PCRE16 || defined COMPILE_PCRE32
1.1.1.2 misho 2741:
2742: extern int PRIV(strcmp_uc_uc)(const pcre_uchar *,
2743: const pcre_uchar *);
2744: extern int PRIV(strcmp_uc_c8)(const pcre_uchar *,
2745: const char *);
2746: extern int PRIV(strncmp_uc_uc)(const pcre_uchar *,
2747: const pcre_uchar *, unsigned int num);
2748: extern int PRIV(strncmp_uc_c8)(const pcre_uchar *,
2749: const char *, unsigned int num);
2750: extern unsigned int PRIV(strlen_uc)(const pcre_uchar *str);
2751:
2752: #define STRCMP_UC_UC(str1, str2) \
2753: PRIV(strcmp_uc_uc)((str1), (str2))
2754: #define STRCMP_UC_C8(str1, str2) \
2755: PRIV(strcmp_uc_c8)((str1), (str2))
2756: #define STRNCMP_UC_UC(str1, str2, num) \
2757: PRIV(strncmp_uc_uc)((str1), (str2), (num))
2758: #define STRNCMP_UC_C8(str1, str2, num) \
2759: PRIV(strncmp_uc_c8)((str1), (str2), (num))
2760: #define STRLEN_UC(str) PRIV(strlen_uc)(str)
2761:
1.1.1.4 misho 2762: #endif /* COMPILE_PCRE[8|16|32] */
2763:
2764: #if defined COMPILE_PCRE8 || defined COMPILE_PCRE16
2765:
2766: #define STRCMP_UC_UC_TEST(str1, str2) STRCMP_UC_UC(str1, str2)
2767: #define STRCMP_UC_C8_TEST(str1, str2) STRCMP_UC_C8(str1, str2)
2768:
2769: #elif defined COMPILE_PCRE32
2770:
2771: extern int PRIV(strcmp_uc_uc_utf)(const pcre_uchar *,
2772: const pcre_uchar *);
2773: extern int PRIV(strcmp_uc_c8_utf)(const pcre_uchar *,
2774: const char *);
2775:
2776: #define STRCMP_UC_UC_TEST(str1, str2) \
2777: (utf ? PRIV(strcmp_uc_uc_utf)((str1), (str2)) : PRIV(strcmp_uc_uc)((str1), (str2)))
2778: #define STRCMP_UC_C8_TEST(str1, str2) \
2779: (utf ? PRIV(strcmp_uc_c8_utf)((str1), (str2)) : PRIV(strcmp_uc_c8)((str1), (str2)))
2780:
2781: #endif /* COMPILE_PCRE[8|16|32] */
1.1.1.2 misho 2782:
2783: extern const pcre_uchar *PRIV(find_bracket)(const pcre_uchar *, BOOL, int);
2784: extern BOOL PRIV(is_newline)(PCRE_PUCHAR, int, PCRE_PUCHAR,
2785: int *, BOOL);
1.1.1.4 misho 2786: extern unsigned int PRIV(ord2utf)(pcre_uint32, pcre_uchar *);
1.1.1.2 misho 2787: extern int PRIV(valid_utf)(PCRE_PUCHAR, int, int *);
2788: extern BOOL PRIV(was_newline)(PCRE_PUCHAR, int, PCRE_PUCHAR,
2789: int *, BOOL);
1.1.1.4 misho 2790: extern BOOL PRIV(xclass)(pcre_uint32, const pcre_uchar *, BOOL);
1.1 misho 2791:
2792: #ifdef SUPPORT_JIT
1.1.1.3 misho 2793: extern void PRIV(jit_compile)(const REAL_PCRE *,
2794: PUBL(extra) *, int);
1.1.1.4 misho 2795: extern int PRIV(jit_exec)(const PUBL(extra) *,
1.1.1.3 misho 2796: const pcre_uchar *, int, int, int, int *, int);
1.1.1.2 misho 2797: extern void PRIV(jit_free)(void *);
2798: extern int PRIV(jit_get_size)(void *);
2799: extern const char* PRIV(jit_get_target)(void);
1.1 misho 2800: #endif
2801:
2802: /* Unicode character database (UCD) */
2803:
2804: typedef struct {
1.1.1.4 misho 2805: pcre_uint8 script; /* ucp_Arabic, etc. */
2806: pcre_uint8 chartype; /* ucp_Cc, etc. (general categories) */
2807: pcre_uint8 gbprop; /* ucp_gbControl, etc. (grapheme break property) */
2808: pcre_uint8 caseset; /* offset to multichar other cases or zero */
2809: pcre_int32 other_case; /* offset to other case, or zero if none */
1.1 misho 2810: } ucd_record;
2811:
1.1.1.4 misho 2812: extern const pcre_uint32 PRIV(ucd_caseless_sets)[];
1.1.1.2 misho 2813: extern const ucd_record PRIV(ucd_records)[];
2814: extern const pcre_uint8 PRIV(ucd_stage1)[];
2815: extern const pcre_uint16 PRIV(ucd_stage2)[];
1.1.1.4 misho 2816: extern const pcre_uint32 PRIV(ucp_gentype)[];
2817: extern const pcre_uint32 PRIV(ucp_gbtable)[];
1.1 misho 2818: #ifdef SUPPORT_JIT
1.1.1.2 misho 2819: extern const int PRIV(ucp_typerange)[];
1.1 misho 2820: #endif
2821:
1.1.1.2 misho 2822: #ifdef SUPPORT_UCP
1.1 misho 2823: /* UCD access macros */
2824:
2825: #define UCD_BLOCK_SIZE 128
1.1.1.2 misho 2826: #define GET_UCD(ch) (PRIV(ucd_records) + \
1.1.1.4 misho 2827: PRIV(ucd_stage2)[PRIV(ucd_stage1)[(int)(ch) / UCD_BLOCK_SIZE] * \
2828: UCD_BLOCK_SIZE + (int)(ch) % UCD_BLOCK_SIZE])
1.1 misho 2829:
1.1.1.4 misho 2830: #define UCD_CHARTYPE(ch) GET_UCD(ch)->chartype
2831: #define UCD_SCRIPT(ch) GET_UCD(ch)->script
2832: #define UCD_CATEGORY(ch) PRIV(ucp_gentype)[UCD_CHARTYPE(ch)]
2833: #define UCD_GRAPHBREAK(ch) GET_UCD(ch)->gbprop
2834: #define UCD_CASESET(ch) GET_UCD(ch)->caseset
2835: #define UCD_OTHERCASE(ch) ((pcre_uint32)((int)ch + (int)(GET_UCD(ch)->other_case)))
1.1 misho 2836:
1.1.1.2 misho 2837: #endif /* SUPPORT_UCP */
2838:
1.1 misho 2839: #endif
2840:
2841: /* End of pcre_internal.h */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to pcre_internal.h CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / pcre