--- embedaddon/pcre/sljit/sljitConfigInternal.h	2012/02/21 23:05:52	1.1.1.1
+++ embedaddon/pcre/sljit/sljitConfigInternal.h	2013/07/22 08:25:57	1.1.1.4
@@ -1,7 +1,7 @@
 /*
  *    Stack-less Just-In-Time compiler
  *
- *    Copyright 2009-2010 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without modification, are
  * permitted provided that the following conditions are met:
@@ -28,21 +28,30 @@
 #define _SLJIT_CONFIG_INTERNAL_H_
 
 /*
-   SLJIT defines the following variables itself depending on the configuration:
-   sljit_b, sljit_ub : signed and unsigned 8 bit byte
-   sljit_h, sljit_uh : signed and unsigned 16 bit half-word (short) type
-   sljit_i, sljit_ui : signed and unsigned 32 bit integer type
-   sljit_w, sljit_uw : signed and unsigned machine word, enough to store a pointer (same as intptr_t)
-   SLJIT_CALL : C calling convention for both calling JIT and C callbacks from JIT
+   SLJIT defines the following macros depending on the target architecture:
+
+   Feature detection (boolean) macros:
    SLJIT_32BIT_ARCHITECTURE : 32 bit architecture
    SLJIT_64BIT_ARCHITECTURE : 64 bit architecture
-   SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_w/sljit_uw array by index
-   SLJIT_FLOAT_SHIFT : the shift required to apply when accessing a double array by index
-   SLJIT_BIG_ENDIAN : big endian architecture
+   SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index
+   SLJIT_DOUBLE_SHIFT : the shift required to apply when accessing a double array by index
    SLJIT_LITTLE_ENDIAN : little endian architecture
-   SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET()
-   SLJIT_W : for defining 64 bit constants on 64 bit architectures (compiler workaround)
-   SLJIT_UNALIGNED : allows unaligned memory accesses for integer arithmetic (only!)
+   SLJIT_BIG_ENDIAN : big endian architecture
+   SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!)
+   SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information
+   SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
+
+   Types and useful macros:
+   sljit_sb, sljit_ub : signed and unsigned 8 bit byte
+   sljit_sh, sljit_uh : signed and unsigned 16 bit half-word (short) type
+   sljit_si, sljit_ui : signed and unsigned 32 bit integer type
+   sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer
+   sljit_p : unsgined pointer value (usually the same as sljit_uw, but
+             some 64 bit ABIs may use 32 bit pointers)
+   sljit_s : single precision floating point value
+   sljit_d : double precision floating point value
+   SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT
+   SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
 */
 
 #if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
@@ -53,6 +62,7 @@
 	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
 	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
 	|| (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
+	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
 	|| (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
 	|| (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED))
 #error "An architecture must be selected"
@@ -67,6 +77,7 @@
 	+ (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
 	+ (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
 	+ (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
+	+ (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
 	+ (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
 	+ (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2
 #error "Multiple architectures are selected"
@@ -89,12 +100,14 @@
 #else
 #define SLJIT_CONFIG_ARM_V5 1
 #endif
-#elif defined(__ppc64__) || defined(__powerpc64__)
+#elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__))
 #define SLJIT_CONFIG_PPC_64 1
-#elif defined(__ppc__) || defined(__powerpc__)
+#elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER)
 #define SLJIT_CONFIG_PPC_32 1
-#elif defined(__mips__)
+#elif defined(__mips__) && !defined(_LP64)
 #define SLJIT_CONFIG_MIPS_32 1
+#elif defined(__sparc__) || defined(__sparc)
+#define SLJIT_CONFIG_SPARC_32 1
 #else
 /* Unsupported architecture */
 #define SLJIT_CONFIG_UNSUPPORTED 1
@@ -160,9 +173,13 @@
 #endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */
 
 #ifndef SLJIT_INLINE
-/* Inline functions. */
+/* Inline functions. Some old compilers do not support them. */
+#if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510
+#define SLJIT_INLINE
+#else
 #define SLJIT_INLINE __inline
 #endif
+#endif /* !SLJIT_INLINE */
 
 #ifndef SLJIT_CONST
 /* Const variables. */
@@ -190,16 +207,31 @@
 
 #ifndef SLJIT_CACHE_FLUSH
 
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 
+/* Not required to implement on archs with unified caches. */
+#define SLJIT_CACHE_FLUSH(from, to)
+
+#elif defined __APPLE__
+
+/* Supported by all macs since Mac OS 10.5.
+   However, it does not work on non-jailbroken iOS devices,
+   although the compilation is successful. */
+
+#define SLJIT_CACHE_FLUSH(from, to) \
+	sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from))
+
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+
 /* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */
 #define SLJIT_CACHE_FLUSH(from, to) \
 	ppc_cache_flush((from), (to))
 
-#elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
 
-/* Not required to implement on archs with unified caches. */
-#define SLJIT_CACHE_FLUSH(from, to)
+/* The __clear_cache() implementation of GCC is a dummy function on Sparc. */
+#define SLJIT_CACHE_FLUSH(from, to) \
+	sparc_cache_flush((from), (to))
 
 #else
 
@@ -213,39 +245,53 @@
 
 /* 8 bit byte type. */
 typedef unsigned char sljit_ub;
-typedef signed char sljit_b;
+typedef signed char sljit_sb;
 
 /* 16 bit half-word type. */
 typedef unsigned short int sljit_uh;
-typedef signed short int sljit_h;
+typedef signed short int sljit_sh;
 
 /* 32 bit integer type. */
 typedef unsigned int sljit_ui;
-typedef signed int sljit_i;
+typedef signed int sljit_si;
 
 /* Machine word type. Can encapsulate a pointer.
      32 bit for 32 bit machines.
      64 bit for 64 bit machines. */
-#if !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+/* Just to have something. */
+#define SLJIT_WORD_SHIFT 0
+typedef unsigned long int sljit_uw;
+typedef long int sljit_sw;
+#elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 #define SLJIT_32BIT_ARCHITECTURE 1
 #define SLJIT_WORD_SHIFT 2
 typedef unsigned int sljit_uw;
-typedef int sljit_w;
+typedef int sljit_sw;
 #else
 #define SLJIT_64BIT_ARCHITECTURE 1
 #define SLJIT_WORD_SHIFT 3
 #ifdef _WIN32
 typedef unsigned __int64 sljit_uw;
-typedef __int64 sljit_w;
+typedef __int64 sljit_sw;
 #else
 typedef unsigned long int sljit_uw;
-typedef long int sljit_w;
+typedef long int sljit_sw;
 #endif
 #endif
 
-/* Double precision. */
-#define SLJIT_FLOAT_SHIFT 3
+typedef sljit_uw sljit_p;
 
+/* Floating point types. */
+typedef float sljit_s;
+typedef double sljit_d;
+
+/* Shift for pointer sized data. */
+#define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT
+
+/* Shift for double precision sized data. */
+#define SLJIT_DOUBLE_SHIFT 3
+
 #ifndef SLJIT_W
 
 /* Defining long constants. */
@@ -262,25 +308,29 @@ typedef long int sljit_w;
 /* ABI (Application Binary Interface) types. */
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 
-#if defined(__GNUC__)
+#if defined(__GNUC__) && !defined(__APPLE__)
 
 #define SLJIT_CALL __attribute__ ((fastcall))
 #define SLJIT_X86_32_FASTCALL 1
 
-#elif defined(_WIN32)
+#elif defined(_MSC_VER)
 
-#ifdef __BORLANDC__
-#define SLJIT_CALL __msfastcall
-#else /* __BORLANDC__ */
 #define SLJIT_CALL __fastcall
-#endif /* __BORLANDC__ */
 #define SLJIT_X86_32_FASTCALL 1
 
-#else /* defined(_WIN32) */
-#define SLJIT_CALL __stdcall
+#elif defined(__BORLANDC__)
+
+#define SLJIT_CALL __msfastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#else /* Unknown compiler. */
+
+/* The cdecl attribute is the default. */
+#define SLJIT_CALL
+
 #endif
 
-#else /* Other architectures. */
+#else /* Non x86-32 architectures. */
 
 #define SLJIT_CALL
 
@@ -291,7 +341,9 @@ typedef long int sljit_w;
 #if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
 
 /* These macros are useful for the application. */
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
+	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
 #define SLJIT_BIG_ENDIAN 1
 
 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
@@ -317,23 +369,32 @@ typedef long int sljit_w;
 #error "Exactly one endianness must be selected"
 #endif
 
-#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-/* It seems ppc64 compilers use an indirect addressing for functions.
-   It makes things really complicated. */
+#ifndef SLJIT_INDIRECT_CALL
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32 && defined _AIX)
+/* It seems certain ppc compilers use an indirect addressing for functions
+   which makes things complicated. */
 #define SLJIT_INDIRECT_CALL 1
 #endif
+#endif /* SLJIT_INDIRECT_CALL */
 
+#ifndef SLJIT_RETURN_ADDRESS_OFFSET
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+#define SLJIT_RETURN_ADDRESS_OFFSET 8
+#else
+#define SLJIT_RETURN_ADDRESS_OFFSET 0
+#endif
+#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
+
 #ifndef SLJIT_SSE2
 
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-/* Turn on SSE2 support on x86 (operating on doubles).
-   (Better performance than legacy fpu instructions). */
+/* Turn on SSE2 support on x86. */
 #define SLJIT_SSE2 1
 
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 /* Auto detect SSE2 support using CPUID.
    On 64 bit x86 cpus, sse2 must be present. */
-#define SLJIT_SSE2_AUTO 1
+#define SLJIT_DETECT_SSE2 1
 #endif
 
 #endif /* (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) */
@@ -360,18 +421,29 @@ SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* pt
 #define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
 #endif
 
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG) || (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 #include <stdio.h>
 #endif
 
 #if (defined SLJIT_DEBUG && SLJIT_DEBUG)
 
-/* Feel free to redefine these two macros. */
-#ifndef SLJIT_ASSERT
+#if !defined(SLJIT_ASSERT) || !defined(SLJIT_ASSERT_STOP)
 
+/* SLJIT_HALT_PROCESS must halt the process. */
+#ifndef SLJIT_HALT_PROCESS
+#include <stdlib.h>
+
 #define SLJIT_HALT_PROCESS() \
-	*((int*)0) = 0
+	abort();
+#endif /* !SLJIT_HALT_PROCESS */
 
+#include <stdio.h>
+
+#endif /* !SLJIT_ASSERT || !SLJIT_ASSERT_STOP */
+
+/* Feel free to redefine these two macros. */
+#ifndef SLJIT_ASSERT
+
 #define SLJIT_ASSERT(x) \
 	do { \
 		if (SLJIT_UNLIKELY(!(x))) { \
@@ -394,6 +466,7 @@ SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* pt
 
 #else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
 
+/* Forcing empty, but valid statements. */
 #undef SLJIT_ASSERT
 #undef SLJIT_ASSERT_STOP