1: /*
2: * Stack-less Just-In-Time compiler
3: *
4: * Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
5: *
6: * Redistribution and use in source and binary forms, with or without modification, are
7: * permitted provided that the following conditions are met:
8: *
9: * 1. Redistributions of source code must retain the above copyright notice, this list of
10: * conditions and the following disclaimer.
11: *
12: * 2. Redistributions in binary form must reproduce the above copyright notice, this list
13: * of conditions and the following disclaimer in the documentation and/or other materials
14: * provided with the distribution.
15: *
16: * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
17: * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18: * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
19: * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
20: * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
21: * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
22: * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
23: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
24: * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25: */
26:
27: #ifndef _SLJIT_LIR_H_
28: #define _SLJIT_LIR_H_
29:
30: /*
31: ------------------------------------------------------------------------
32: Stack-Less JIT compiler for multiple architectures (x86, ARM, PowerPC)
33: ------------------------------------------------------------------------
34:
35: Short description
36: Advantages:
37: - The execution can be continued from any LIR instruction. In other
38: words, it is possible to jump to any label from anywhere, even from
39: a code fragment, which is compiled later, if both compiled code
40: shares the same context. See sljit_emit_enter for more details
41: - Supports self modifying code: target of (conditional) jump and call
42: instructions and some constant values can be dynamically modified
43: during runtime
44: - although it is not suggested to do it frequently
45: - can be used for inline caching: save an important value once
46: in the instruction stream
47: - since this feature limits the optimization possibilities, a
48: special flag must be passed at compile time when these
49: instructions are emitted
50: - A fixed stack space can be allocated for local variables
51: - The compiler is thread-safe
52: - The compiler is highly configurable through preprocessor macros.
53: You can disable unneeded features (multithreading in single
54: threaded applications), and you can use your own system functions
55: (including memory allocators). See sljitConfig.h
56: Disadvantages:
57: - No automatic register allocation, and temporary results are
58: not stored on the stack. (hence the name comes)
59: - Limited number of registers (only 6+4 integer registers, max 3+2
60: scratch, max 3+2 saved and 6 floating point registers)
61: In practice:
62: - This approach is very effective for interpreters
63: - One of the saved registers typically points to a stack interface
64: - It can jump to any exception handler anytime (even if it belongs
65: to another function)
66: - Hot paths can be modified during runtime reflecting the changes
67: of the fastest execution path of the dynamic language
68: - SLJIT supports complex memory addressing modes
69: - mainly position and context independent code (except some cases)
70:
71: For valgrind users:
72: - pass --smc-check=all argument to valgrind, since JIT is a "self-modifying code"
73: */
74:
75: #if !(defined SLJIT_NO_DEFAULT_CONFIG && SLJIT_NO_DEFAULT_CONFIG)
76: #include "sljitConfig.h"
77: #endif
78:
79: /* The following header file defines useful macros for fine tuning
80: sljit based code generators. They are listed in the beginning
81: of sljitConfigInternal.h */
82:
83: #include "sljitConfigInternal.h"
84:
85: /* --------------------------------------------------------------------- */
86: /* Error codes */
87: /* --------------------------------------------------------------------- */
88:
89: /* Indicates no error. */
90: #define SLJIT_SUCCESS 0
91: /* After the call of sljit_generate_code(), the error code of the compiler
92: is set to this value to avoid future sljit calls (in debug mode at least).
93: The complier should be freed after sljit_generate_code(). */
94: #define SLJIT_ERR_COMPILED 1
95: /* Cannot allocate non executable memory. */
96: #define SLJIT_ERR_ALLOC_FAILED 2
97: /* Cannot allocate executable memory.
98: Only for sljit_generate_code() */
99: #define SLJIT_ERR_EX_ALLOC_FAILED 3
100: /* return value for SLJIT_CONFIG_UNSUPPORTED empty architecture. */
101: #define SLJIT_ERR_UNSUPPORTED 4
102:
103: /* --------------------------------------------------------------------- */
104: /* Registers */
105: /* --------------------------------------------------------------------- */
106:
107: #define SLJIT_UNUSED 0
108:
109: /* Scratch (temporary) registers whose may not preserve their values
110: across function calls. */
111: #define SLJIT_SCRATCH_REG1 1
112: #define SLJIT_SCRATCH_REG2 2
113: #define SLJIT_SCRATCH_REG3 3
114: /* Note: extra registers cannot be used for memory addressing. */
115: /* Note: on x86-32, these registers are emulated (using stack
116: loads & stores). */
117: #define SLJIT_TEMPORARY_EREG1 4
118: #define SLJIT_TEMPORARY_EREG2 5
119:
120: /* Saved registers whose preserve their values across function calls. */
121: #define SLJIT_SAVED_REG1 6
122: #define SLJIT_SAVED_REG2 7
123: #define SLJIT_SAVED_REG3 8
124: /* Note: extra registers cannot be used for memory addressing. */
125: /* Note: on x86-32, these registers are emulated (using stack
126: loads & stores). */
127: #define SLJIT_SAVED_EREG1 9
128: #define SLJIT_SAVED_EREG2 10
129:
130: /* Read-only register (cannot be the destination of an operation).
131: Only SLJIT_MEM1(SLJIT_LOCALS_REG) addressing mode is allowed since
132: several ABIs has certain limitations about the stack layout. However
133: sljit_get_local_base() can be used to obtain the offset of a value
134: on the stack. */
135: #define SLJIT_LOCALS_REG 11
136:
137: /* Number of registers. */
138: #define SLJIT_NO_TMP_REGISTERS 5
139: #define SLJIT_NO_GEN_REGISTERS 5
140: #define SLJIT_NO_REGISTERS 11
141:
142: /* Return with machine word. */
143:
144: #define SLJIT_RETURN_REG SLJIT_SCRATCH_REG1
145:
146: /* x86 prefers specific registers for special purposes. In case of shift
147: by register it supports only SLJIT_SCRATCH_REG3 for shift argument
148: (which is the src2 argument of sljit_emit_op2). If another register is
149: used, sljit must exchange data between registers which cause a minor
150: slowdown. Other architectures has no such limitation. */
151:
152: #define SLJIT_PREF_SHIFT_REG SLJIT_SCRATCH_REG3
153:
154: /* --------------------------------------------------------------------- */
155: /* Floating point registers */
156: /* --------------------------------------------------------------------- */
157:
158: /* Note: SLJIT_UNUSED as destination is not valid for floating point
159: operations, since they cannot be used for setting flags. */
160:
161: /* Floating point operations are performed on double or
162: single precision values. */
163:
164: #define SLJIT_FLOAT_REG1 1
165: #define SLJIT_FLOAT_REG2 2
166: #define SLJIT_FLOAT_REG3 3
167: #define SLJIT_FLOAT_REG4 4
168: #define SLJIT_FLOAT_REG5 5
169: #define SLJIT_FLOAT_REG6 6
170:
171: #define SLJIT_NO_FLOAT_REGISTERS 6
172:
173: /* --------------------------------------------------------------------- */
174: /* Main structures and functions */
175: /* --------------------------------------------------------------------- */
176:
177: struct sljit_memory_fragment {
178: struct sljit_memory_fragment *next;
179: sljit_uw used_size;
180: /* Must be aligned to sljit_sw. */
181: sljit_ub memory[1];
182: };
183:
184: struct sljit_label {
185: struct sljit_label *next;
186: sljit_uw addr;
187: /* The maximum size difference. */
188: sljit_uw size;
189: };
190:
191: struct sljit_jump {
192: struct sljit_jump *next;
193: sljit_uw addr;
194: sljit_sw flags;
195: union {
196: sljit_uw target;
197: struct sljit_label* label;
198: } u;
199: };
200:
201: struct sljit_const {
202: struct sljit_const *next;
203: sljit_uw addr;
204: };
205:
206: struct sljit_compiler {
207: sljit_si error;
208:
209: struct sljit_label *labels;
210: struct sljit_jump *jumps;
211: struct sljit_const *consts;
212: struct sljit_label *last_label;
213: struct sljit_jump *last_jump;
214: struct sljit_const *last_const;
215:
216: struct sljit_memory_fragment *buf;
217: struct sljit_memory_fragment *abuf;
218:
219: /* Used local registers. */
220: sljit_si scratches;
221: /* Used saved registers. */
222: sljit_si saveds;
223: /* Local stack size. */
224: sljit_si local_size;
225: /* Code size. */
226: sljit_uw size;
227: /* For statistical purposes. */
228: sljit_uw executable_size;
229:
230: #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
231: sljit_si args;
232: sljit_si locals_offset;
233: sljit_si scratches_start;
234: sljit_si saveds_start;
235: #endif
236:
237: #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
238: sljit_si mode32;
239: #endif
240:
241: #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
242: sljit_si flags_saved;
243: #endif
244:
245: #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
246: /* Constant pool handling. */
247: sljit_uw *cpool;
248: sljit_ub *cpool_unique;
249: sljit_uw cpool_diff;
250: sljit_uw cpool_fill;
251: /* Other members. */
252: /* Contains pointer, "ldr pc, [...]" pairs. */
253: sljit_uw patches;
254: #endif
255:
256: #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
257: /* Temporary fields. */
258: sljit_uw shift_imm;
259: sljit_si cache_arg;
260: sljit_sw cache_argw;
261: #endif
262:
263: #if (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
264: sljit_si cache_arg;
265: sljit_sw cache_argw;
266: #endif
267:
268: #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
269: sljit_sw imm;
270: sljit_si cache_arg;
271: sljit_sw cache_argw;
272: #endif
273:
274: #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
275: sljit_si delay_slot;
276: sljit_si cache_arg;
277: sljit_sw cache_argw;
278: #endif
279:
280: #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
281: sljit_si delay_slot;
282: sljit_si cache_arg;
283: sljit_sw cache_argw;
284: #endif
285:
286: #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
287: FILE* verbose;
288: #endif
289:
290: #if (defined SLJIT_DEBUG && SLJIT_DEBUG)
291: /* Local size passed to the functions. */
292: sljit_si logical_local_size;
293: #endif
294:
295: #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
296: sljit_si skip_checks;
297: #endif
298: };
299:
300: /* --------------------------------------------------------------------- */
301: /* Main functions */
302: /* --------------------------------------------------------------------- */
303:
304: /* Creates an sljit compiler.
305: Returns NULL if failed. */
306: SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void);
307:
308: /* Free everything except the compiled machine code. */
309: SLJIT_API_FUNC_ATTRIBUTE void sljit_free_compiler(struct sljit_compiler *compiler);
310:
311: /* Returns the current error code. If an error is occurred, future sljit
312: calls which uses the same compiler argument returns early with the same
313: error code. Thus there is no need for checking the error after every
314: call, it is enough to do it before the code is compiled. Removing
315: these checks increases the performance of the compiling process. */
316: static SLJIT_INLINE sljit_si sljit_get_compiler_error(struct sljit_compiler *compiler) { return compiler->error; }
317:
318: /*
319: Allocate a small amount of memory. The size must be <= 64 bytes on 32 bit,
320: and <= 128 bytes on 64 bit architectures. The memory area is owned by the
321: compiler, and freed by sljit_free_compiler. The returned pointer is
322: sizeof(sljit_sw) aligned. Excellent for allocating small blocks during
323: the compiling, and no need to worry about freeing them. The size is
324: enough to contain at most 16 pointers. If the size is outside of the range,
325: the function will return with NULL. However, this return value does not
326: indicate that there is no more memory (does not set the current error code
327: of the compiler to out-of-memory status).
328: */
329: SLJIT_API_FUNC_ATTRIBUTE void* sljit_alloc_memory(struct sljit_compiler *compiler, sljit_si size);
330:
331: #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
332: /* Passing NULL disables verbose. */
333: SLJIT_API_FUNC_ATTRIBUTE void sljit_compiler_verbose(struct sljit_compiler *compiler, FILE* verbose);
334: #endif
335:
336: SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compiler);
337: SLJIT_API_FUNC_ATTRIBUTE void sljit_free_code(void* code);
338:
339: /*
340: After the machine code generation is finished we can retrieve the allocated
341: executable memory size, although this area may not be fully filled with
342: instructions depending on some optimizations. This function is useful only
343: for statistical purposes.
344:
345: Before a successful code generation, this function returns with 0.
346: */
347: static SLJIT_INLINE sljit_uw sljit_get_generated_code_size(struct sljit_compiler *compiler) { return compiler->executable_size; }
348:
349: /* Instruction generation. Returns with any error code. If there is no
350: error, they return with SLJIT_SUCCESS. */
351:
352: /*
353: The executable code is basically a function call from the viewpoint of
354: the C language. The function calls must obey to the ABI (Application
355: Binary Interface) of the platform, which specify the purpose of machine
356: registers and stack handling among other things. The sljit_emit_enter
357: function emits the necessary instructions for setting up a new context
358: for the executable code and moves function arguments to the saved
359: registers. The number of arguments are specified in the "args"
360: parameter and the first argument goes to SLJIT_SAVED_REG1, the second
361: goes to SLJIT_SAVED_REG2 and so on. The number of scratch and
362: saved registers are passed in "scratches" and "saveds" arguments
363: respectively. Since the saved registers contains the arguments,
364: "args" must be less or equal than "saveds". The sljit_emit_enter
365: is also capable of allocating a stack space for local variables. The
366: "local_size" argument contains the size in bytes of this local area
367: and its staring address is stored in SLJIT_LOCALS_REG. However
368: the SLJIT_LOCALS_REG is not necessary the machine stack pointer.
369: The memory bytes between SLJIT_LOCALS_REG (inclusive) and
370: SLJIT_LOCALS_REG + local_size (exclusive) can be modified freely
371: until the function returns. The stack space is uninitialized.
372:
373: Note: every call of sljit_emit_enter and sljit_set_context
374: overwrites the previous context. */
375:
376: #define SLJIT_MAX_LOCAL_SIZE 65536
377:
378: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compiler,
379: sljit_si args, sljit_si scratches, sljit_si saveds, sljit_si local_size);
380:
381: /* The machine code has a context (which contains the local stack space size,
382: number of used registers, etc.) which initialized by sljit_emit_enter. Several
383: functions (like sljit_emit_return) requres this context to be able to generate
384: the appropriate code. However, some code fragments (like inline cache) may have
385: no normal entry point so their context is unknown for the compiler. Using the
386: function below we can specify their context.
387:
388: Note: every call of sljit_emit_enter and sljit_set_context overwrites
389: the previous context. */
390:
391: SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
392: sljit_si args, sljit_si scratches, sljit_si saveds, sljit_si local_size);
393:
394: /* Return from machine code. The op argument can be SLJIT_UNUSED which means the
395: function does not return with anything or any opcode between SLJIT_MOV and
396: SLJIT_MOV_P (see sljit_emit_op1). As for src and srcw they must be 0 if op
397: is SLJIT_UNUSED, otherwise see below the description about source and
398: destination arguments. */
399:
400: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op,
401: sljit_si src, sljit_sw srcw);
402:
403: /* Fast calling mechanism for utility functions (see SLJIT_FAST_CALL). All registers and
404: even the stack frame is passed to the callee. The return address is preserved in
405: dst/dstw by sljit_emit_fast_enter (the type of the value stored by this function
406: is sljit_p), and sljit_emit_fast_return can use this as a return value later. */
407:
408: /* Note: only for sljit specific, non ABI compilant calls. Fast, since only a few machine
409: instructions are needed. Excellent for small uility functions, where saving registers
410: and setting up a new stack frame would cost too much performance. However, it is still
411: possible to return to the address of the caller (or anywhere else). */
412:
413: /* Note: flags are not changed (unlike sljit_emit_enter / sljit_emit_return). */
414:
415: /* Note: although sljit_emit_fast_return could be replaced by an ijump, it is not suggested,
416: since many architectures do clever branch prediction on call / return instruction pairs. */
417:
418: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw);
419: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw);
420:
421: /*
422: Source and destination values for arithmetical instructions
423: imm - a simple immediate value (cannot be used as a destination)
424: reg - any of the registers (immediate argument must be 0)
425: [imm] - absolute immediate memory address
426: [reg+imm] - indirect memory address
427: [reg+(reg<<imm)] - indirect indexed memory address (shift must be between 0 and 3)
428: useful for (byte, half, int, sljit_sw) array access
429: (fully supported by both x86 and ARM architectures, and cheap operation on others)
430: */
431:
432: /*
433: IMPORATNT NOTE: memory access MUST be naturally aligned except
434: SLJIT_UNALIGNED macro is defined and its value is 1.
435:
436: length | alignment
437: ---------+-----------
438: byte | 1 byte (any physical_address is accepted)
439: half | 2 byte (physical_address & 0x1 == 0)
440: int | 4 byte (physical_address & 0x3 == 0)
441: word | 4 byte if SLJIT_32BIT_ARCHITECTURE is defined and its value is 1
442: | 8 byte if SLJIT_64BIT_ARCHITECTURE is defined and its value is 1
443: pointer | size of sljit_p type (4 byte on 32 bit machines, 4 or 8 byte
444: | on 64 bit machines)
445:
446: Note: Different architectures have different addressing limitations.
447: A single instruction is enough for the following addressing
448: modes. Other adrressing modes are emulated by instruction
449: sequences. This information could help to improve those code
450: generators which focuses only a few architectures.
451:
452: x86: [reg+imm], -2^32+1 <= imm <= 2^32-1 (full address space on x86-32)
453: [reg+(reg<<imm)] is supported
454: [imm], -2^32+1 <= imm <= 2^32-1 is supported
455: Write-back is not supported
456: arm: [reg+imm], -4095 <= imm <= 4095 or -255 <= imm <= 255 for signed
457: bytes, any halfs or floating point values)
458: [reg+(reg<<imm)] is supported
459: Write-back is supported
460: arm-t2: [reg+imm], -255 <= imm <= 4095
461: [reg+(reg<<imm)] is supported
462: Write back is supported only for [reg+imm], where -255 <= imm <= 255
463: ppc: [reg+imm], -65536 <= imm <= 65535. 64 bit loads/stores and 32 bit
464: signed load on 64 bit requires immediates divisible by 4.
465: [reg+imm] is not supported for signed 8 bit values.
466: [reg+reg] is supported
467: Write-back is supported except for one instruction: 32 bit signed
468: load with [reg+imm] addressing mode on 64 bit.
469: mips: [reg+imm], -65536 <= imm <= 65535
470: sparc: [reg+imm], -4096 <= imm <= 4095
471: [reg+reg] is supported
472: */
473:
474: /* Register output: simply the name of the register.
475: For destination, you can use SLJIT_UNUSED as well. */
476: #define SLJIT_MEM 0x100
477: #define SLJIT_MEM0() (SLJIT_MEM)
478: #define SLJIT_MEM1(r1) (SLJIT_MEM | (r1))
479: #define SLJIT_MEM2(r1, r2) (SLJIT_MEM | (r1) | ((r2) << 4))
480: #define SLJIT_IMM 0x200
481:
482: /* Set 32 bit operation mode (I) on 64 bit CPUs. The flag is totally ignored on
483: 32 bit CPUs. If this flag is set for an arithmetic operation, it uses only the
484: lower 32 bit of the input register(s), and set the CPU status flags according
485: to the 32 bit result. The higher 32 bits are undefined for both the input and
486: output. However, the CPU might not ignore those higher 32 bits, like MIPS, which
487: expects it to be the sign extension of the lower 32 bit. All 32 bit operations
488: are undefined, if this condition is not fulfilled. Therefore, when SLJIT_INT_OP
489: is specified, all register arguments must be the result of other operations with
490: the same SLJIT_INT_OP flag. In other words, although a register can hold either
491: a 64 or 32 bit value, these values cannot be mixed. The only exceptions are
492: SLJIT_IMOV and SLJIT_IMOVU (SLJIT_MOV_SI/SLJIT_MOV_UI/SLJIT_MOVU_SI/SLJIT_MOV_UI
493: with SLJIT_INT_OP flag) which can convert any source argument to SLJIT_INT_OP
494: compatible result. This conversion might be unnecessary on some CPUs like x86-64,
495: since the upper 32 bit is always ignored. In this case SLJIT is clever enough
496: to not generate any instructions if the source and destination operands are the
497: same registers. Affects sljit_emit_op0, sljit_emit_op1 and sljit_emit_op2. */
498: #define SLJIT_INT_OP 0x100
499:
500: /* Single precision mode (SP). This flag is similar to SLJIT_INT_OP, just
501: it applies to floating point registers (it is even the same bit). When
502: this flag is passed, the CPU performs single precision floating point
503: operations. Similar to SLJIT_INT_OP, all register arguments must be the
504: result of other floating point operations with this flag. Affects
505: sljit_emit_fop1, sljit_emit_fop2 and sljit_emit_fcmp. */
506: #define SLJIT_SINGLE_OP 0x100
507:
508: /* Common CPU status flags for all architectures (x86, ARM, PPC)
509: - carry flag
510: - overflow flag
511: - zero flag
512: - negative/positive flag (depends on arc)
513: On mips, these flags are emulated by software. */
514:
515: /* By default, the instructions may, or may not set the CPU status flags.
516: Forcing to set or keep status flags can be done with the following flags: */
517:
518: /* Note: sljit tries to emit the minimum number of instructions. Using these
519: flags can increase them, so use them wisely to avoid unnecessary code generation. */
520:
521: /* Set Equal (Zero) status flag (E). */
522: #define SLJIT_SET_E 0x0200
523: /* Set signed status flag (S). */
524: #define SLJIT_SET_S 0x0400
525: /* Set unsgined status flag (U). */
526: #define SLJIT_SET_U 0x0800
527: /* Set signed overflow flag (O). */
528: #define SLJIT_SET_O 0x1000
529: /* Set carry flag (C).
530: Note: Kinda unsigned overflow, but behaves differently on various cpus. */
531: #define SLJIT_SET_C 0x2000
532: /* Do not modify the flags (K).
533: Note: This flag cannot be combined with any other SLJIT_SET_* flag. */
534: #define SLJIT_KEEP_FLAGS 0x4000
535:
536: /* Notes:
537: - you cannot postpone conditional jump instructions except if noted that
538: the instruction does not set flags (See: SLJIT_KEEP_FLAGS).
539: - flag combinations: '|' means 'logical or'. */
540:
541: /* Flags: - (never set any flags)
542: Note: breakpoint instruction is not supported by all architectures (namely ppc)
543: It falls back to SLJIT_NOP in those cases. */
544: #define SLJIT_BREAKPOINT 0
545: /* Flags: - (never set any flags)
546: Note: may or may not cause an extra cycle wait
547: it can even decrease the runtime in a few cases. */
548: #define SLJIT_NOP 1
549: /* Flags: - (may destroy flags)
550: Unsigned multiplication of SLJIT_SCRATCH_REG1 and SLJIT_SCRATCH_REG2.
551: Result goes to SLJIT_SCRATCH_REG2:SLJIT_SCRATCH_REG1 (high:low) word */
552: #define SLJIT_UMUL 2
553: /* Flags: - (may destroy flags)
554: Signed multiplication of SLJIT_SCRATCH_REG1 and SLJIT_SCRATCH_REG2.
555: Result goes to SLJIT_SCRATCH_REG2:SLJIT_SCRATCH_REG1 (high:low) word */
556: #define SLJIT_SMUL 3
557: /* Flags: I - (may destroy flags)
558: Unsigned divide of the value in SLJIT_SCRATCH_REG1 by the value in SLJIT_SCRATCH_REG2.
559: The result is placed in SLJIT_SCRATCH_REG1 and the remainder goes to SLJIT_SCRATCH_REG2.
560: Note: if SLJIT_SCRATCH_REG2 contains 0, the behaviour is undefined. */
561: #define SLJIT_UDIV 4
562: #define SLJIT_IUDIV (SLJIT_UDIV | SLJIT_INT_OP)
563: /* Flags: I - (may destroy flags)
564: Signed divide of the value in SLJIT_SCRATCH_REG1 by the value in SLJIT_SCRATCH_REG2.
565: The result is placed in SLJIT_SCRATCH_REG1 and the remainder goes to SLJIT_SCRATCH_REG2.
566: Note: if SLJIT_SCRATCH_REG2 contains 0, the behaviour is undefined. */
567: #define SLJIT_SDIV 5
568: #define SLJIT_ISDIV (SLJIT_SDIV | SLJIT_INT_OP)
569:
570: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op);
571:
572: /* Notes for MOV instructions:
573: U = Mov with update (post form). If source or destination defined as SLJIT_MEM1(r1)
574: or SLJIT_MEM2(r1, r2), r1 is increased by the sum of r2 and the constant argument
575: UB = unsigned byte (8 bit)
576: SB = signed byte (8 bit)
577: UH = unsigned half (16 bit)
578: SH = signed half (16 bit)
579: UI = unsigned int (32 bit)
580: SI = signed int (32 bit)
581: P = pointer (sljit_p) size */
582:
583: /* Flags: - (never set any flags) */
584: #define SLJIT_MOV 6
585: /* Flags: I - (never set any flags) */
586: #define SLJIT_MOV_UB 7
587: #define SLJIT_IMOV_UB (SLJIT_MOV_UB | SLJIT_INT_OP)
588: /* Flags: I - (never set any flags) */
589: #define SLJIT_MOV_SB 8
590: #define SLJIT_IMOV_SB (SLJIT_MOV_SB | SLJIT_INT_OP)
591: /* Flags: I - (never set any flags) */
592: #define SLJIT_MOV_UH 9
593: #define SLJIT_IMOV_UH (SLJIT_MOV_UH | SLJIT_INT_OP)
594: /* Flags: I - (never set any flags) */
595: #define SLJIT_MOV_SH 10
596: #define SLJIT_IMOV_SH (SLJIT_MOV_SH | SLJIT_INT_OP)
597: /* Flags: I - (never set any flags)
598: Note: see SLJIT_INT_OP for further details. */
599: #define SLJIT_MOV_UI 11
600: /* No SLJIT_INT_OP form, since it the same as SLJIT_IMOVU. */
601: /* Flags: I - (never set any flags)
602: Note: see SLJIT_INT_OP for further details. */
603: #define SLJIT_MOV_SI 12
604: #define SLJIT_IMOV (SLJIT_MOV_SI | SLJIT_INT_OP)
605: /* Flags: - (never set any flags) */
606: #define SLJIT_MOV_P 13
607: /* Flags: - (never set any flags) */
608: #define SLJIT_MOVU 14
609: /* Flags: I - (never set any flags) */
610: #define SLJIT_MOVU_UB 15
611: #define SLJIT_IMOVU_UB (SLJIT_MOVU_UB | SLJIT_INT_OP)
612: /* Flags: I - (never set any flags) */
613: #define SLJIT_MOVU_SB 16
614: #define SLJIT_IMOVU_SB (SLJIT_MOVU_SB | SLJIT_INT_OP)
615: /* Flags: I - (never set any flags) */
616: #define SLJIT_MOVU_UH 17
617: #define SLJIT_IMOVU_UH (SLJIT_MOVU_UH | SLJIT_INT_OP)
618: /* Flags: I - (never set any flags) */
619: #define SLJIT_MOVU_SH 18
620: #define SLJIT_IMOVU_SH (SLJIT_MOVU_SH | SLJIT_INT_OP)
621: /* Flags: I - (never set any flags)
622: Note: see SLJIT_INT_OP for further details. */
623: #define SLJIT_MOVU_UI 19
624: /* No SLJIT_INT_OP form, since it the same as SLJIT_IMOVU. */
625: /* Flags: I - (never set any flags)
626: Note: see SLJIT_INT_OP for further details. */
627: #define SLJIT_MOVU_SI 20
628: #define SLJIT_IMOVU (SLJIT_MOVU_SI | SLJIT_INT_OP)
629: /* Flags: - (never set any flags) */
630: #define SLJIT_MOVU_P 21
631: /* Flags: I | E | K */
632: #define SLJIT_NOT 22
633: #define SLJIT_INOT (SLJIT_NOT | SLJIT_INT_OP)
634: /* Flags: I | E | O | K */
635: #define SLJIT_NEG 23
636: #define SLJIT_INEG (SLJIT_NEG | SLJIT_INT_OP)
637: /* Count leading zeroes
638: Flags: I | E | K
639: Important note! Sparc 32 does not support K flag, since
640: the required popc instruction is introduced only in sparc 64. */
641: #define SLJIT_CLZ 24
642: #define SLJIT_ICLZ (SLJIT_CLZ | SLJIT_INT_OP)
643:
644: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler, sljit_si op,
645: sljit_si dst, sljit_sw dstw,
646: sljit_si src, sljit_sw srcw);
647:
648: /* Flags: I | E | O | C | K */
649: #define SLJIT_ADD 25
650: #define SLJIT_IADD (SLJIT_ADD | SLJIT_INT_OP)
651: /* Flags: I | C | K */
652: #define SLJIT_ADDC 26
653: #define SLJIT_IADDC (SLJIT_ADDC | SLJIT_INT_OP)
654: /* Flags: I | E | S | U | O | C | K */
655: #define SLJIT_SUB 27
656: #define SLJIT_ISUB (SLJIT_SUB | SLJIT_INT_OP)
657: /* Flags: I | C | K */
658: #define SLJIT_SUBC 28
659: #define SLJIT_ISUBC (SLJIT_SUBC | SLJIT_INT_OP)
660: /* Note: integer mul
661: Flags: I | O (see SLJIT_C_MUL_*) | K */
662: #define SLJIT_MUL 29
663: #define SLJIT_IMUL (SLJIT_MUL | SLJIT_INT_OP)
664: /* Flags: I | E | K */
665: #define SLJIT_AND 30
666: #define SLJIT_IAND (SLJIT_AND | SLJIT_INT_OP)
667: /* Flags: I | E | K */
668: #define SLJIT_OR 31
669: #define SLJIT_IOR (SLJIT_OR | SLJIT_INT_OP)
670: /* Flags: I | E | K */
671: #define SLJIT_XOR 32
672: #define SLJIT_IXOR (SLJIT_XOR | SLJIT_INT_OP)
673: /* Flags: I | E | K
674: Let bit_length be the length of the shift operation: 32 or 64.
675: If src2 is immediate, src2w is masked by (bit_length - 1).
676: Otherwise, if the content of src2 is outside the range from 0
677: to bit_length - 1, the operation is undefined. */
678: #define SLJIT_SHL 33
679: #define SLJIT_ISHL (SLJIT_SHL | SLJIT_INT_OP)
680: /* Flags: I | E | K
681: Let bit_length be the length of the shift operation: 32 or 64.
682: If src2 is immediate, src2w is masked by (bit_length - 1).
683: Otherwise, if the content of src2 is outside the range from 0
684: to bit_length - 1, the operation is undefined. */
685: #define SLJIT_LSHR 34
686: #define SLJIT_ILSHR (SLJIT_LSHR | SLJIT_INT_OP)
687: /* Flags: I | E | K
688: Let bit_length be the length of the shift operation: 32 or 64.
689: If src2 is immediate, src2w is masked by (bit_length - 1).
690: Otherwise, if the content of src2 is outside the range from 0
691: to bit_length - 1, the operation is undefined. */
692: #define SLJIT_ASHR 35
693: #define SLJIT_IASHR (SLJIT_ASHR | SLJIT_INT_OP)
694:
695: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler, sljit_si op,
696: sljit_si dst, sljit_sw dstw,
697: sljit_si src1, sljit_sw src1w,
698: sljit_si src2, sljit_sw src2w);
699:
700: /* The following function is a helper function for sljit_emit_op_custom.
701: It returns with the real machine register index of any SLJIT_SCRATCH
702: SLJIT_SAVED or SLJIT_LOCALS register.
703: Note: it returns with -1 for virtual registers (all EREGs on x86-32). */
704:
705: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg);
706:
707: /* The following function is a helper function for sljit_emit_op_custom.
708: It returns with the real machine register index of any SLJIT_FLOAT register.
709: Note: the index is divided by 2 on ARM 32 bit architectures. */
710:
711: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg);
712:
713: /* Any instruction can be inserted into the instruction stream by
714: sljit_emit_op_custom. It has a similar purpose as inline assembly.
715: The size parameter must match to the instruction size of the target
716: architecture:
717:
718: x86: 0 < size <= 15. The instruction argument can be byte aligned.
719: Thumb2: if size == 2, the instruction argument must be 2 byte aligned.
720: if size == 4, the instruction argument must be 4 byte aligned.
721: Otherwise: size must be 4 and instruction argument must be 4 byte aligned. */
722:
723: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *compiler,
724: void *instruction, sljit_si size);
725:
726: /* Returns with non-zero if fpu is available. */
727:
728: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void);
729:
730: /* Note: dst is the left and src is the right operand for SLJIT_FCMP.
731: Note: NaN check is always performed. If SLJIT_C_FLOAT_UNORDERED is set,
732: the comparison result is unpredictable.
733: Flags: SP | E | S (see SLJIT_C_FLOAT_*) */
734: #define SLJIT_CMPD 36
735: #define SLJIT_CMPS (SLJIT_CMPD | SLJIT_SINGLE_OP)
736: /* Flags: SP - (never set any flags) */
737: #define SLJIT_MOVD 37
738: #define SLJIT_MOVS (SLJIT_MOVD | SLJIT_SINGLE_OP)
739: /* Flags: SP - (never set any flags) */
740: #define SLJIT_NEGD 38
741: #define SLJIT_NEGS (SLJIT_NEGD | SLJIT_SINGLE_OP)
742: /* Flags: SP - (never set any flags) */
743: #define SLJIT_ABSD 39
744: #define SLJIT_ABSS (SLJIT_ABSD | SLJIT_SINGLE_OP)
745:
746: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
747: sljit_si dst, sljit_sw dstw,
748: sljit_si src, sljit_sw srcw);
749:
750: /* Flags: SP - (never set any flags) */
751: #define SLJIT_ADDD 40
752: #define SLJIT_ADDS (SLJIT_ADDD | SLJIT_SINGLE_OP)
753: /* Flags: SP - (never set any flags) */
754: #define SLJIT_SUBD 41
755: #define SLJIT_SUBS (SLJIT_SUBD | SLJIT_SINGLE_OP)
756: /* Flags: SP - (never set any flags) */
757: #define SLJIT_MULD 42
758: #define SLJIT_MULS (SLJIT_MULD | SLJIT_SINGLE_OP)
759: /* Flags: SP - (never set any flags) */
760: #define SLJIT_DIVD 43
761: #define SLJIT_DIVS (SLJIT_DIVD | SLJIT_SINGLE_OP)
762:
763: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
764: sljit_si dst, sljit_sw dstw,
765: sljit_si src1, sljit_sw src1w,
766: sljit_si src2, sljit_sw src2w);
767:
768: /* Label and jump instructions. */
769:
770: SLJIT_API_FUNC_ATTRIBUTE struct sljit_label* sljit_emit_label(struct sljit_compiler *compiler);
771:
772: /* Invert conditional instruction: xor (^) with 0x1 */
773: #define SLJIT_C_EQUAL 0
774: #define SLJIT_C_ZERO 0
775: #define SLJIT_C_NOT_EQUAL 1
776: #define SLJIT_C_NOT_ZERO 1
777:
778: #define SLJIT_C_LESS 2
779: #define SLJIT_C_GREATER_EQUAL 3
780: #define SLJIT_C_GREATER 4
781: #define SLJIT_C_LESS_EQUAL 5
782: #define SLJIT_C_SIG_LESS 6
783: #define SLJIT_C_SIG_GREATER_EQUAL 7
784: #define SLJIT_C_SIG_GREATER 8
785: #define SLJIT_C_SIG_LESS_EQUAL 9
786:
787: #define SLJIT_C_OVERFLOW 10
788: #define SLJIT_C_NOT_OVERFLOW 11
789:
790: #define SLJIT_C_MUL_OVERFLOW 12
791: #define SLJIT_C_MUL_NOT_OVERFLOW 13
792:
793: #define SLJIT_C_FLOAT_EQUAL 14
794: #define SLJIT_C_FLOAT_NOT_EQUAL 15
795: #define SLJIT_C_FLOAT_LESS 16
796: #define SLJIT_C_FLOAT_GREATER_EQUAL 17
797: #define SLJIT_C_FLOAT_GREATER 18
798: #define SLJIT_C_FLOAT_LESS_EQUAL 19
799: #define SLJIT_C_FLOAT_UNORDERED 20
800: #define SLJIT_C_FLOAT_ORDERED 21
801:
802: #define SLJIT_JUMP 22
803: #define SLJIT_FAST_CALL 23
804: #define SLJIT_CALL0 24
805: #define SLJIT_CALL1 25
806: #define SLJIT_CALL2 26
807: #define SLJIT_CALL3 27
808:
809: /* Fast calling method. See sljit_emit_fast_enter / sljit_emit_fast_return. */
810:
811: /* The target can be changed during runtime (see: sljit_set_jump_addr). */
812: #define SLJIT_REWRITABLE_JUMP 0x1000
813:
814: /* Emit a jump instruction. The destination is not set, only the type of the jump.
815: type must be between SLJIT_C_EQUAL and SLJIT_CALL3
816: type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
817: Flags: - (never set any flags) for both conditional and unconditional jumps.
818: Flags: destroy all flags for calls. */
819: SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type);
820:
821: /* Basic arithmetic comparison. In most architectures it is implemented as
822: an SLJIT_SUB operation (with SLJIT_UNUSED destination and setting
823: appropriate flags) followed by a sljit_emit_jump. However some
824: architectures (i.e: MIPS) may employ special optimizations here. It is
825: suggested to use this comparison form when appropriate.
826: type must be between SLJIT_C_EQUAL and SLJIT_C_SIG_LESS_EQUAL
827: type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP or SLJIT_INT_OP
828: Flags: destroy flags. */
829: SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
830: sljit_si src1, sljit_sw src1w,
831: sljit_si src2, sljit_sw src2w);
832:
833: /* Basic floating point comparison. In most architectures it is implemented as
834: an SLJIT_FCMP operation (setting appropriate flags) followed by a
835: sljit_emit_jump. However some architectures (i.e: MIPS) may employ
836: special optimizations here. It is suggested to use this comparison form
837: when appropriate.
838: type must be between SLJIT_C_FLOAT_EQUAL and SLJIT_C_FLOAT_ORDERED
839: type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP and SLJIT_SINGLE_OP
840: Flags: destroy flags.
841: Note: if either operand is NaN, the behaviour is undefined for
842: type <= SLJIT_C_FLOAT_LESS_EQUAL. */
843: SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_si type,
844: sljit_si src1, sljit_sw src1w,
845: sljit_si src2, sljit_sw src2w);
846:
847: /* Set the destination of the jump to this label. */
848: SLJIT_API_FUNC_ATTRIBUTE void sljit_set_label(struct sljit_jump *jump, struct sljit_label* label);
849: /* Only for jumps defined with SLJIT_REWRITABLE_JUMP flag.
850: Note: use sljit_emit_ijump for fixed jumps. */
851: SLJIT_API_FUNC_ATTRIBUTE void sljit_set_target(struct sljit_jump *jump, sljit_uw target);
852:
853: /* Call function or jump anywhere. Both direct and indirect form
854: type must be between SLJIT_JUMP and SLJIT_CALL3
855: Direct form: set src to SLJIT_IMM() and srcw to the address
856: Indirect form: any other valid addressing mode
857: Flags: - (never set any flags) for unconditional jumps.
858: Flags: destroy all flags for calls. */
859: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw);
860:
861: /* Perform the operation using the conditional flags as the second argument.
862: Type must always be between SLJIT_C_EQUAL and SLJIT_C_FLOAT_ORDERED. The
863: value represented by the type is 1, if the condition represented by the type
864: is fulfilled, and 0 otherwise.
865:
866: If op == SLJIT_MOV, SLJIT_MOV_SI, SLJIT_MOV_UI:
867: Set dst to the value represented by the type (0 or 1).
868: Src must be SLJIT_UNUSED, and srcw must be 0
869: Flags: - (never set any flags)
870: If op == SLJIT_OR, op == SLJIT_AND, op == SLJIT_XOR
871: Performs the binary operation using src as the first, and the value
872: represented by type as the second argument.
873: Important note: only dst=src and dstw=srcw is supported at the moment!
874: Flags: I | E | K
875: Note: sljit_emit_op_flags does nothing, if dst is SLJIT_UNUSED (regardless of op). */
876: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op,
877: sljit_si dst, sljit_sw dstw,
878: sljit_si src, sljit_sw srcw,
879: sljit_si type);
880:
881: /* Copies the base address of SLJIT_LOCALS_REG+offset to dst.
882: Flags: - (never set any flags) */
883: SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset);
884:
885: /* The constant can be changed runtime (see: sljit_set_const)
886: Flags: - (never set any flags) */
887: SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value);
888:
889: /* After the code generation the address for label, jump and const instructions
890: are computed. Since these structures are freed by sljit_free_compiler, the
891: addresses must be preserved by the user program elsewere. */
892: static SLJIT_INLINE sljit_uw sljit_get_label_addr(struct sljit_label *label) { return label->addr; }
893: static SLJIT_INLINE sljit_uw sljit_get_jump_addr(struct sljit_jump *jump) { return jump->addr; }
894: static SLJIT_INLINE sljit_uw sljit_get_const_addr(struct sljit_const *const_) { return const_->addr; }
895:
896: /* Only the address is required to rewrite the code. */
897: SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr);
898: SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant);
899:
900: /* --------------------------------------------------------------------- */
901: /* Miscellaneous utility functions */
902: /* --------------------------------------------------------------------- */
903:
904: #define SLJIT_MAJOR_VERSION 0
905: #define SLJIT_MINOR_VERSION 91
906:
907: /* Get the human readable name of the platform. Can be useful on platforms
908: like ARM, where ARM and Thumb2 functions can be mixed, and
909: it is useful to know the type of the code generator. */
910: SLJIT_API_FUNC_ATTRIBUTE SLJIT_CONST char* sljit_get_platform_name(void);
911:
912: /* Portable helper function to get an offset of a member. */
913: #define SLJIT_OFFSETOF(base, member) ((sljit_sw)(&((base*)0x10)->member) - 0x10)
914:
915: #if (defined SLJIT_UTIL_GLOBAL_LOCK && SLJIT_UTIL_GLOBAL_LOCK)
916: /* This global lock is useful to compile common functions. */
917: SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_grab_lock(void);
918: SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_release_lock(void);
919: #endif
920:
921: #if (defined SLJIT_UTIL_STACK && SLJIT_UTIL_STACK)
922:
923: /* The sljit_stack is a utiliy feature of sljit, which allocates a
924: writable memory region between base (inclusive) and limit (exclusive).
925: Both base and limit is a pointer, and base is always <= than limit.
926: This feature uses the "address space reserve" feature
927: of modern operating systems. Basically we don't need to allocate a
928: huge memory block in one step for the worst case, we can start with
929: a smaller chunk and extend it later. Since the address space is
930: reserved, the data never copied to other regions, thus it is safe
931: to store pointers here. */
932:
933: /* Note: The base field is aligned to PAGE_SIZE bytes (usually 4k or more).
934: Note: stack growing should not happen in small steps: 4k, 16k or even
935: bigger growth is better.
936: Note: this structure may not be supported by all operating systems.
937: Some kind of fallback mechanism is suggested when SLJIT_UTIL_STACK
938: is not defined. */
939:
940: struct sljit_stack {
941: /* User data, anything can be stored here.
942: Starting with the same value as base. */
943: sljit_uw top;
944: /* These members are read only. */
945: sljit_uw base;
946: sljit_uw limit;
947: sljit_uw max_limit;
948: };
949:
950: /* Returns NULL if unsuccessful.
951: Note: limit and max_limit contains the size for stack allocation
952: Note: the top field is initialized to base. */
953: SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit);
954: SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack* stack);
955:
956: /* Can be used to increase (allocate) or decrease (free) the memory area.
957: Returns with a non-zero value if unsuccessful. If new_limit is greater than
958: max_limit, it will fail. It is very easy to implement a stack data structure,
959: since the growth ratio can be added to the current limit, and sljit_stack_resize
960: will do all the necessary checks. The fields of the stack are not changed if
961: sljit_stack_resize fails. */
962: SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack* stack, sljit_uw new_limit);
963:
964: #endif /* (defined SLJIT_UTIL_STACK && SLJIT_UTIL_STACK) */
965:
966: #if !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL)
967:
968: /* Get the entry address of a given function. */
969: #define SLJIT_FUNC_OFFSET(func_name) ((sljit_sw)func_name)
970:
971: #else /* !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL) */
972:
973: /* All JIT related code should be placed in the same context (library, binary, etc.). */
974:
975: #define SLJIT_FUNC_OFFSET(func_name) (*(sljit_sw*)(void*)func_name)
976:
977: /* For powerpc64, the function pointers point to a context descriptor. */
978: struct sljit_function_context {
979: sljit_sw addr;
980: sljit_sw r2;
981: sljit_sw r11;
982: };
983:
984: /* Fill the context arguments using the addr and the function.
985: If func_ptr is NULL, it will not be set to the address of context
986: If addr is NULL, the function address also comes from the func pointer. */
987: SLJIT_API_FUNC_ATTRIBUTE void sljit_set_function_context(void** func_ptr, struct sljit_function_context* context, sljit_sw addr, void* func);
988:
989: #endif /* !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL) */
990:
991: #endif /* _SLJIT_LIR_H_ */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to sljitLir.h CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / pcre / sljit