Annotation of embedaddon/pcre/sljit/sljitNativeSPARC_32.c, revision 1.1.1.1

1.1       misho       1: /*
                      2:  *    Stack-less Just-In-Time compiler
                      3:  *
                      4:  *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
                      5:  *
                      6:  * Redistribution and use in source and binary forms, with or without modification, are
                      7:  * permitted provided that the following conditions are met:
                      8:  *
                      9:  *   1. Redistributions of source code must retain the above copyright notice, this list of
                     10:  *      conditions and the following disclaimer.
                     11:  *
                     12:  *   2. Redistributions in binary form must reproduce the above copyright notice, this list
                     13:  *      of conditions and the following disclaimer in the documentation and/or other materials
                     14:  *      provided with the distribution.
                     15:  *
                     16:  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
                     17:  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
                     18:  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
                     19:  * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
                     20:  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
                     21:  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
                     22:  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
                     23:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
                     24:  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
                     25:  */
                     26: 
                     27: static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst, sljit_sw imm)
                     28: {
                     29:        if (imm <= SIMM_MAX && imm >= SIMM_MIN)
                     30:                return push_inst(compiler, OR | D(dst) | S1(0) | IMM(imm), DR(dst));
                     31: 
                     32:        FAIL_IF(push_inst(compiler, SETHI | D(dst) | ((imm >> 10) & 0x3fffff), DR(dst)));
                     33:        return (imm & 0x3ff) ? push_inst(compiler, OR | D(dst) | S1(dst) | IMM_ARG | (imm & 0x3ff), DR(dst)) : SLJIT_SUCCESS;
                     34: }
                     35: 
                     36: #define ARG2(flags, src2) ((flags & SRC2_IMM) ? IMM(src2) : S2(src2))
                     37: 
                     38: static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, sljit_si op, sljit_si flags,
                     39:        sljit_si dst, sljit_si src1, sljit_sw src2)
                     40: {
                     41:        SLJIT_COMPILE_ASSERT(ICC_IS_SET == SET_FLAGS, icc_is_set_and_set_flags_must_be_the_same);
                     42: 
                     43:        switch (op) {
                     44:        case SLJIT_MOV:
                     45:        case SLJIT_MOV_UI:
                     46:        case SLJIT_MOV_SI:
                     47:        case SLJIT_MOV_P:
                     48:                SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
                     49:                if (dst != src2)
                     50:                        return push_inst(compiler, OR | D(dst) | S1(0) | S2(src2), DR(dst));
                     51:                return SLJIT_SUCCESS;
                     52: 
                     53:        case SLJIT_MOV_UB:
                     54:        case SLJIT_MOV_SB:
                     55:                SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
                     56:                if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
                     57:                        if (op == SLJIT_MOV_UB)
                     58:                                return push_inst(compiler, AND | D(dst) | S1(src2) | IMM(0xff), DR(dst));
                     59:                        FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src2) | IMM(24), DR(dst)));
                     60:                        return push_inst(compiler, SRA | D(dst) | S1(dst) | IMM(24), DR(dst));
                     61:                }
                     62:                else if (dst != src2)
                     63:                        SLJIT_ASSERT_STOP();
                     64:                return SLJIT_SUCCESS;
                     65: 
                     66:        case SLJIT_MOV_UH:
                     67:        case SLJIT_MOV_SH:
                     68:                SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
                     69:                if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
                     70:                        FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src2) | IMM(16), DR(dst)));
                     71:                        return push_inst(compiler, (op == SLJIT_MOV_SH ? SRA : SRL) | D(dst) | S1(dst) | IMM(16), DR(dst));
                     72:                }
                     73:                else if (dst != src2)
                     74:                        SLJIT_ASSERT_STOP();
                     75:                return SLJIT_SUCCESS;
                     76: 
                     77:        case SLJIT_NOT:
                     78:                SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
                     79:                return push_inst(compiler, XNOR | (flags & SET_FLAGS) | D(dst) | S1(0) | S2(src2), DR(dst) | (flags & SET_FLAGS));
                     80: 
                     81:        case SLJIT_CLZ:
                     82:                SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
                     83:                /* sparc 32 does not support SLJIT_KEEP_FLAGS. Not sure I can fix this. */
                     84:                FAIL_IF(push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(src2) | S2(0), SET_FLAGS));
                     85:                FAIL_IF(push_inst(compiler, OR | D(TMP_REG1) | S1(0) | S2(src2), DR(TMP_REG1)));
                     86:                FAIL_IF(push_inst(compiler, BICC | DA(0x1) | (7 & DISP_MASK), UNMOVABLE_INS));
                     87:                FAIL_IF(push_inst(compiler, OR | (flags & SET_FLAGS) | D(dst) | S1(0) | IMM(32), UNMOVABLE_INS | (flags & SET_FLAGS)));
                     88:                FAIL_IF(push_inst(compiler, OR | D(dst) | S1(0) | IMM(-1), DR(dst)));
                     89: 
                     90:                /* Loop. */
                     91:                FAIL_IF(push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(TMP_REG1) | S2(0), SET_FLAGS));
                     92:                FAIL_IF(push_inst(compiler, SLL | D(TMP_REG1) | S1(TMP_REG1) | IMM(1), DR(TMP_REG1)));
                     93:                FAIL_IF(push_inst(compiler, BICC | DA(0xe) | (-2 & DISP_MASK), UNMOVABLE_INS));
                     94:                return push_inst(compiler, ADD | (flags & SET_FLAGS) | D(dst) | S1(dst) | IMM(1), UNMOVABLE_INS | (flags & SET_FLAGS));
                     95: 
                     96:        case SLJIT_ADD:
                     97:                return push_inst(compiler, ADD | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
                     98: 
                     99:        case SLJIT_ADDC:
                    100:                return push_inst(compiler, ADDC | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
                    101: 
                    102:        case SLJIT_SUB:
                    103:                return push_inst(compiler, SUB | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
                    104: 
                    105:        case SLJIT_SUBC:
                    106:                return push_inst(compiler, SUBC | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
                    107: 
                    108:        case SLJIT_MUL:
                    109:                FAIL_IF(push_inst(compiler, SMUL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
                    110:                if (!(flags & SET_FLAGS))
                    111:                        return SLJIT_SUCCESS;
                    112:                FAIL_IF(push_inst(compiler, SRA | D(TMP_REG1) | S1(dst) | IMM(31), DR(TMP_REG1)));
                    113:                FAIL_IF(push_inst(compiler, RDY | D(TMP_REG4), DR(TMP_REG4)));
                    114:                return push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(TMP_REG1) | S2(TMP_REG4), MOVABLE_INS | SET_FLAGS);
                    115: 
                    116:        case SLJIT_AND:
                    117:                return push_inst(compiler, AND | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
                    118: 
                    119:        case SLJIT_OR:
                    120:                return push_inst(compiler, OR | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
                    121: 
                    122:        case SLJIT_XOR:
                    123:                return push_inst(compiler, XOR | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
                    124: 
                    125:        case SLJIT_SHL:
                    126:                FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
                    127:                return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
                    128: 
                    129:        case SLJIT_LSHR:
                    130:                FAIL_IF(push_inst(compiler, SRL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
                    131:                return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
                    132: 
                    133:        case SLJIT_ASHR:
                    134:                FAIL_IF(push_inst(compiler, SRA | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
                    135:                return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
                    136:        }
                    137: 
                    138:        SLJIT_ASSERT_STOP();
                    139:        return SLJIT_SUCCESS;
                    140: }
                    141: 
                    142: static SLJIT_INLINE sljit_si emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw init_value)
                    143: {
                    144:        FAIL_IF(push_inst(compiler, SETHI | D(dst) | ((init_value >> 10) & 0x3fffff), DR(dst)));
                    145:        return push_inst(compiler, OR | D(dst) | S1(dst) | IMM_ARG | (init_value & 0x3ff), DR(dst));
                    146: }
                    147: 
                    148: SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr)
                    149: {
                    150:        sljit_ins *inst = (sljit_ins*)addr;
                    151: 
                    152:        inst[0] = (inst[0] & 0xffc00000) | ((new_addr >> 10) & 0x3fffff);
                    153:        inst[1] = (inst[1] & 0xfffffc00) | (new_addr & 0x3ff);
                    154:        SLJIT_CACHE_FLUSH(inst, inst + 2);
                    155: }
                    156: 
                    157: SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant)
                    158: {
                    159:        sljit_ins *inst = (sljit_ins*)addr;
                    160: 
                    161:        inst[0] = (inst[0] & 0xffc00000) | ((new_constant >> 10) & 0x3fffff);
                    162:        inst[1] = (inst[1] & 0xfffffc00) | (new_constant & 0x3ff);
                    163:        SLJIT_CACHE_FLUSH(inst, inst + 2);
                    164: }

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>