Annotation of embedaddon/php/ext/pcre/pcrelib/README, revision 1.1.1.1
1.1 misho 1: README file for PCRE (Perl-compatible regular expression library)
2: -----------------------------------------------------------------
3:
4: The latest release of PCRE is always available in three alternative formats
5: from:
6:
7: ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz
8: ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.bz2
9: ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.zip
10:
11: There is a mailing list for discussion about the development of PCRE at
12:
13: pcre-dev@exim.org
14:
15: Please read the NEWS file if you are upgrading from a previous release.
16: The contents of this README file are:
17:
18: The PCRE APIs
19: Documentation for PCRE
20: Contributions by users of PCRE
21: Building PCRE on non-Unix systems
22: Building PCRE on Unix-like systems
23: Retrieving configuration information on Unix-like systems
24: Shared libraries on Unix-like systems
25: Cross-compiling on Unix-like systems
26: Using HP's ANSI C++ compiler (aCC)
27: Using PCRE from MySQL
28: Making new tarballs
29: Testing PCRE
30: Character tables
31: File manifest
32:
33:
34: The PCRE APIs
35: -------------
36:
37: PCRE is written in C, and it has its own API. The distribution also includes a
38: set of C++ wrapper functions (see the pcrecpp man page for details), courtesy
39: of Google Inc.
40:
41: In addition, there is a set of C wrapper functions that are based on the POSIX
42: regular expression API (see the pcreposix man page). These end up in the
43: library called libpcreposix. Note that this just provides a POSIX calling
44: interface to PCRE; the regular expressions themselves still follow Perl syntax
45: and semantics. The POSIX API is restricted, and does not give full access to
46: all of PCRE's facilities.
47:
48: The header file for the POSIX-style functions is called pcreposix.h. The
49: official POSIX name is regex.h, but I did not want to risk possible problems
50: with existing files of that name by distributing it that way. To use PCRE with
51: an existing program that uses the POSIX API, pcreposix.h will have to be
52: renamed or pointed at by a link.
53:
54: If you are using the POSIX interface to PCRE and there is already a POSIX regex
55: library installed on your system, as well as worrying about the regex.h header
56: file (as mentioned above), you must also take care when linking programs to
57: ensure that they link with PCRE's libpcreposix library. Otherwise they may pick
58: up the POSIX functions of the same name from the other library.
59:
60: One way of avoiding this confusion is to compile PCRE with the addition of
61: -Dregcomp=PCREregcomp (and similarly for the other POSIX functions) to the
62: compiler flags (CFLAGS if you are using "configure" -- see below). This has the
63: effect of renaming the functions so that the names no longer clash. Of course,
64: you have to do the same thing for your applications, or write them using the
65: new names.
66:
67:
68: Documentation for PCRE
69: ----------------------
70:
71: If you install PCRE in the normal way on a Unix-like system, you will end up
72: with a set of man pages whose names all start with "pcre". The one that is just
73: called "pcre" lists all the others. In addition to these man pages, the PCRE
74: documentation is supplied in two other forms:
75:
76: 1. There are files called doc/pcre.txt, doc/pcregrep.txt, and
77: doc/pcretest.txt in the source distribution. The first of these is a
78: concatenation of the text forms of all the section 3 man pages except
79: those that summarize individual functions. The other two are the text
80: forms of the section 1 man pages for the pcregrep and pcretest commands.
81: These text forms are provided for ease of scanning with text editors or
82: similar tools. They are installed in <prefix>/share/doc/pcre, where
83: <prefix> is the installation prefix (defaulting to /usr/local).
84:
85: 2. A set of files containing all the documentation in HTML form, hyperlinked
86: in various ways, and rooted in a file called index.html, is distributed in
87: doc/html and installed in <prefix>/share/doc/pcre/html.
88:
89: Users of PCRE have contributed files containing the documentation for various
90: releases in CHM format. These can be found in the Contrib directory of the FTP
91: site (see next section).
92:
93:
94: Contributions by users of PCRE
95: ------------------------------
96:
97: You can find contributions from PCRE users in the directory
98:
99: ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/Contrib
100:
101: There is a README file giving brief descriptions of what they are. Some are
102: complete in themselves; others are pointers to URLs containing relevant files.
103: Some of this material is likely to be well out-of-date. Several of the earlier
104: contributions provided support for compiling PCRE on various flavours of
105: Windows (I myself do not use Windows). Nowadays there is more Windows support
106: in the standard distribution, so these contibutions have been archived.
107:
108:
109: Building PCRE on non-Unix systems
110: ---------------------------------
111:
112: For a non-Unix system, please read the comments in the file NON-UNIX-USE,
113: though if your system supports the use of "configure" and "make" you may be
114: able to build PCRE in the same way as for Unix-like systems. PCRE can also be
115: configured in many platform environments using the GUI facility provided by
116: CMake's cmake-gui command. This creates Makefiles, solution files, etc.
117:
118: PCRE has been compiled on many different operating systems. It should be
119: straightforward to build PCRE on any system that has a Standard C compiler and
120: library, because it uses only Standard C functions.
121:
122:
123: Building PCRE on Unix-like systems
124: ----------------------------------
125:
126: If you are using HP's ANSI C++ compiler (aCC), please see the special note
127: in the section entitled "Using HP's ANSI C++ compiler (aCC)" below.
128:
129: The following instructions assume the use of the widely used "configure, make,
130: make install" process. There is also support for CMake in the PCRE
131: distribution; there are some comments about using CMake in the NON-UNIX-USE
132: file, though it can also be used in Unix-like systems.
133:
134: To build PCRE on a Unix-like system, first run the "configure" command from the
135: PCRE distribution directory, with your current directory set to the directory
136: where you want the files to be created. This command is a standard GNU
137: "autoconf" configuration script, for which generic instructions are supplied in
138: the file INSTALL.
139:
140: Most commonly, people build PCRE within its own distribution directory, and in
141: this case, on many systems, just running "./configure" is sufficient. However,
142: the usual methods of changing standard defaults are available. For example:
143:
144: CFLAGS='-O2 -Wall' ./configure --prefix=/opt/local
145:
146: specifies that the C compiler should be run with the flags '-O2 -Wall' instead
147: of the default, and that "make install" should install PCRE under /opt/local
148: instead of the default /usr/local.
149:
150: If you want to build in a different directory, just run "configure" with that
151: directory as current. For example, suppose you have unpacked the PCRE source
152: into /source/pcre/pcre-xxx, but you want to build it in /build/pcre/pcre-xxx:
153:
154: cd /build/pcre/pcre-xxx
155: /source/pcre/pcre-xxx/configure
156:
157: PCRE is written in C and is normally compiled as a C library. However, it is
158: possible to build it as a C++ library, though the provided building apparatus
159: does not have any features to support this.
160:
161: There are some optional features that can be included or omitted from the PCRE
162: library. You can read more about them in the pcrebuild man page.
163:
164: . If you want to suppress the building of the C++ wrapper library, you can add
165: --disable-cpp to the "configure" command. Otherwise, when "configure" is run,
166: it will try to find a C++ compiler and C++ header files, and if it succeeds,
167: it will try to build the C++ wrapper.
168:
169: . If you want to make use of the support for UTF-8 Unicode character strings in
170: PCRE, you must add --enable-utf8 to the "configure" command. Without it, the
171: code for handling UTF-8 is not included in the library. Even when included,
172: it still has to be enabled by an option at run time. When PCRE is compiled
173: with this option, its input can only either be ASCII or UTF-8, even when
174: running on EBCDIC platforms. It is not possible to use both --enable-utf8 and
175: --enable-ebcdic at the same time.
176:
177: . If, in addition to support for UTF-8 character strings, you want to include
178: support for the \P, \p, and \X sequences that recognize Unicode character
179: properties, you must add --enable-unicode-properties to the "configure"
180: command. This adds about 30K to the size of the library (in the form of a
181: property table); only the basic two-letter properties such as Lu are
182: supported.
183:
184: . You can build PCRE to recognize either CR or LF or the sequence CRLF or any
185: of the preceding, or any of the Unicode newline sequences as indicating the
186: end of a line. Whatever you specify at build time is the default; the caller
187: of PCRE can change the selection at run time. The default newline indicator
188: is a single LF character (the Unix standard). You can specify the default
189: newline indicator by adding --enable-newline-is-cr or --enable-newline-is-lf
190: or --enable-newline-is-crlf or --enable-newline-is-anycrlf or
191: --enable-newline-is-any to the "configure" command, respectively.
192:
193: If you specify --enable-newline-is-cr or --enable-newline-is-crlf, some of
194: the standard tests will fail, because the lines in the test files end with
195: LF. Even if the files are edited to change the line endings, there are likely
196: to be some failures. With --enable-newline-is-anycrlf or
197: --enable-newline-is-any, many tests should succeed, but there may be some
198: failures.
199:
200: . By default, the sequence \R in a pattern matches any Unicode line ending
201: sequence. This is independent of the option specifying what PCRE considers to
202: be the end of a line (see above). However, the caller of PCRE can restrict \R
203: to match only CR, LF, or CRLF. You can make this the default by adding
204: --enable-bsr-anycrlf to the "configure" command (bsr = "backslash R").
205:
206: . When called via the POSIX interface, PCRE uses malloc() to get additional
207: storage for processing capturing parentheses if there are more than 10 of
208: them in a pattern. You can increase this threshold by setting, for example,
209:
210: --with-posix-malloc-threshold=20
211:
212: on the "configure" command.
213:
214: . PCRE has a counter that can be set to limit the amount of resources it uses.
215: If the limit is exceeded during a match, the match fails. The default is ten
216: million. You can change the default by setting, for example,
217:
218: --with-match-limit=500000
219:
220: on the "configure" command. This is just the default; individual calls to
221: pcre_exec() can supply their own value. There is more discussion on the
222: pcreapi man page.
223:
224: . There is a separate counter that limits the depth of recursive function calls
225: during a matching process. This also has a default of ten million, which is
226: essentially "unlimited". You can change the default by setting, for example,
227:
228: --with-match-limit-recursion=500000
229:
230: Recursive function calls use up the runtime stack; running out of stack can
231: cause programs to crash in strange ways. There is a discussion about stack
232: sizes in the pcrestack man page.
233:
234: . The default maximum compiled pattern size is around 64K. You can increase
235: this by adding --with-link-size=3 to the "configure" command. You can
236: increase it even more by setting --with-link-size=4, but this is unlikely
237: ever to be necessary. Increasing the internal link size will reduce
238: performance.
239:
240: . You can build PCRE so that its internal match() function that is called from
241: pcre_exec() does not call itself recursively. Instead, it uses memory blocks
242: obtained from the heap via the special functions pcre_stack_malloc() and
243: pcre_stack_free() to save data that would otherwise be saved on the stack. To
244: build PCRE like this, use
245:
246: --disable-stack-for-recursion
247:
248: on the "configure" command. PCRE runs more slowly in this mode, but it may be
249: necessary in environments with limited stack sizes. This applies only to the
250: pcre_exec() function; it does not apply to pcre_dfa_exec(), which does not
251: use deeply nested recursion. There is a discussion about stack sizes in the
252: pcrestack man page.
253:
254: . For speed, PCRE uses four tables for manipulating and identifying characters
255: whose code point values are less than 256. By default, it uses a set of
256: tables for ASCII encoding that is part of the distribution. If you specify
257:
258: --enable-rebuild-chartables
259:
260: a program called dftables is compiled and run in the default C locale when
261: you obey "make". It builds a source file called pcre_chartables.c. If you do
262: not specify this option, pcre_chartables.c is created as a copy of
263: pcre_chartables.c.dist. See "Character tables" below for further information.
264:
265: . It is possible to compile PCRE for use on systems that use EBCDIC as their
266: character code (as opposed to ASCII) by specifying
267:
268: --enable-ebcdic
269:
270: This automatically implies --enable-rebuild-chartables (see above). However,
271: when PCRE is built this way, it always operates in EBCDIC. It cannot support
272: both EBCDIC and UTF-8.
273:
274: . It is possible to compile pcregrep to use libz and/or libbz2, in order to
275: read .gz and .bz2 files (respectively), by specifying one or both of
276:
277: --enable-pcregrep-libz
278: --enable-pcregrep-libbz2
279:
280: Of course, the relevant libraries must be installed on your system.
281:
282: . It is possible to compile pcretest so that it links with the libreadline
283: library, by specifying
284:
285: --enable-pcretest-libreadline
286:
287: If this is done, when pcretest's input is from a terminal, it reads it using
288: the readline() function. This provides line-editing and history facilities.
289: Note that libreadline is GPL-licenced, so if you distribute a binary of
290: pcretest linked in this way, there may be licensing issues.
291:
292: Setting this option causes the -lreadline option to be added to the pcretest
293: build. In many operating environments with a sytem-installed readline
294: library this is sufficient. However, in some environments (e.g. if an
295: unmodified distribution version of readline is in use), it may be necessary
296: to specify something like LIBS="-lncurses" as well. This is because, to quote
297: the readline INSTALL, "Readline uses the termcap functions, but does not link
298: with the termcap or curses library itself, allowing applications which link
299: with readline the to choose an appropriate library." If you get error
300: messages about missing functions tgetstr, tgetent, tputs, tgetflag, or tgoto,
301: this is the problem, and linking with the ncurses library should fix it.
302:
303: The "configure" script builds the following files for the basic C library:
304:
305: . Makefile is the makefile that builds the library
306: . config.h contains build-time configuration options for the library
307: . pcre.h is the public PCRE header file
308: . pcre-config is a script that shows the settings of "configure" options
309: . libpcre.pc is data for the pkg-config command
310: . libtool is a script that builds shared and/or static libraries
311: . RunTest is a script for running tests on the basic C library
312: . RunGrepTest is a script for running tests on the pcregrep command
313:
314: Versions of config.h and pcre.h are distributed in the PCRE tarballs under the
315: names config.h.generic and pcre.h.generic. These are provided for those who
316: have to built PCRE without using "configure" or CMake. If you use "configure"
317: or CMake, the .generic versions are not used.
318:
319: If a C++ compiler is found, the following files are also built:
320:
321: . libpcrecpp.pc is data for the pkg-config command
322: . pcrecpparg.h is a header file for programs that call PCRE via the C++ wrapper
323: . pcre_stringpiece.h is the header for the C++ "stringpiece" functions
324:
325: The "configure" script also creates config.status, which is an executable
326: script that can be run to recreate the configuration, and config.log, which
327: contains compiler output from tests that "configure" runs.
328:
329: Once "configure" has run, you can run "make". It builds two libraries, called
330: libpcre and libpcreposix, a test program called pcretest, and the pcregrep
331: command. If a C++ compiler was found on your system, "make" also builds the C++
332: wrapper library, which is called libpcrecpp, and some test programs called
333: pcrecpp_unittest, pcre_scanner_unittest, and pcre_stringpiece_unittest.
334: Building the C++ wrapper can be disabled by adding --disable-cpp to the
335: "configure" command.
336:
337: The command "make check" runs all the appropriate tests. Details of the PCRE
338: tests are given below in a separate section of this document.
339:
340: You can use "make install" to install PCRE into live directories on your
341: system. The following are installed (file names are all relative to the
342: <prefix> that is set when "configure" is run):
343:
344: Commands (bin):
345: pcretest
346: pcregrep
347: pcre-config
348:
349: Libraries (lib):
350: libpcre
351: libpcreposix
352: libpcrecpp (if C++ support is enabled)
353:
354: Configuration information (lib/pkgconfig):
355: libpcre.pc
356: libpcrecpp.pc (if C++ support is enabled)
357:
358: Header files (include):
359: pcre.h
360: pcreposix.h
361: pcre_scanner.h )
362: pcre_stringpiece.h ) if C++ support is enabled
363: pcrecpp.h )
364: pcrecpparg.h )
365:
366: Man pages (share/man/man{1,3}):
367: pcregrep.1
368: pcretest.1
369: pcre.3
370: pcre*.3 (lots more pages, all starting "pcre")
371:
372: HTML documentation (share/doc/pcre/html):
373: index.html
374: *.html (lots more pages, hyperlinked from index.html)
375:
376: Text file documentation (share/doc/pcre):
377: AUTHORS
378: COPYING
379: ChangeLog
380: LICENCE
381: NEWS
382: README
383: pcre.txt (a concatenation of the man(3) pages)
384: pcretest.txt the pcretest man page
385: pcregrep.txt the pcregrep man page
386:
387: If you want to remove PCRE from your system, you can run "make uninstall".
388: This removes all the files that "make install" installed. However, it does not
389: remove any directories, because these are often shared with other programs.
390:
391:
392: Retrieving configuration information on Unix-like systems
393: ---------------------------------------------------------
394:
395: Running "make install" installs the command pcre-config, which can be used to
396: recall information about the PCRE configuration and installation. For example:
397:
398: pcre-config --version
399:
400: prints the version number, and
401:
402: pcre-config --libs
403:
404: outputs information about where the library is installed. This command can be
405: included in makefiles for programs that use PCRE, saving the programmer from
406: having to remember too many details.
407:
408: The pkg-config command is another system for saving and retrieving information
409: about installed libraries. Instead of separate commands for each library, a
410: single command is used. For example:
411:
412: pkg-config --cflags pcre
413:
414: The data is held in *.pc files that are installed in a directory called
415: <prefix>/lib/pkgconfig.
416:
417:
418: Shared libraries on Unix-like systems
419: -------------------------------------
420:
421: The default distribution builds PCRE as shared libraries and static libraries,
422: as long as the operating system supports shared libraries. Shared library
423: support relies on the "libtool" script which is built as part of the
424: "configure" process.
425:
426: The libtool script is used to compile and link both shared and static
427: libraries. They are placed in a subdirectory called .libs when they are newly
428: built. The programs pcretest and pcregrep are built to use these uninstalled
429: libraries (by means of wrapper scripts in the case of shared libraries). When
430: you use "make install" to install shared libraries, pcregrep and pcretest are
431: automatically re-built to use the newly installed shared libraries before being
432: installed themselves. However, the versions left in the build directory still
433: use the uninstalled libraries.
434:
435: To build PCRE using static libraries only you must use --disable-shared when
436: configuring it. For example:
437:
438: ./configure --prefix=/usr/gnu --disable-shared
439:
440: Then run "make" in the usual way. Similarly, you can use --disable-static to
441: build only shared libraries.
442:
443:
444: Cross-compiling on Unix-like systems
445: ------------------------------------
446:
447: You can specify CC and CFLAGS in the normal way to the "configure" command, in
448: order to cross-compile PCRE for some other host. However, you should NOT
449: specify --enable-rebuild-chartables, because if you do, the dftables.c source
450: file is compiled and run on the local host, in order to generate the inbuilt
451: character tables (the pcre_chartables.c file). This will probably not work,
452: because dftables.c needs to be compiled with the local compiler, not the cross
453: compiler.
454:
455: When --enable-rebuild-chartables is not specified, pcre_chartables.c is created
456: by making a copy of pcre_chartables.c.dist, which is a default set of tables
457: that assumes ASCII code. Cross-compiling with the default tables should not be
458: a problem.
459:
460: If you need to modify the character tables when cross-compiling, you should
461: move pcre_chartables.c.dist out of the way, then compile dftables.c by hand and
462: run it on the local host to make a new version of pcre_chartables.c.dist.
463: Then when you cross-compile PCRE this new version of the tables will be used.
464:
465:
466: Using HP's ANSI C++ compiler (aCC)
467: ----------------------------------
468:
469: Unless C++ support is disabled by specifying the "--disable-cpp" option of the
470: "configure" script, you must include the "-AA" option in the CXXFLAGS
471: environment variable in order for the C++ components to compile correctly.
472:
473: Also, note that the aCC compiler on PA-RISC platforms may have a defect whereby
474: needed libraries fail to get included when specifying the "-AA" compiler
475: option. If you experience unresolved symbols when linking the C++ programs,
476: use the workaround of specifying the following environment variable prior to
477: running the "configure" script:
478:
479: CXXLDFLAGS="-lstd_v2 -lCsup_v2"
480:
481:
482: Using Sun's compilers for Solaris
483: ---------------------------------
484:
485: A user reports that the following configurations work on Solaris 9 sparcv9 and
486: Solaris 9 x86 (32-bit):
487:
488: Solaris 9 sparcv9: ./configure --disable-cpp CC=/bin/cc CFLAGS="-m64 -g"
489: Solaris 9 x86: ./configure --disable-cpp CC=/bin/cc CFLAGS="-g"
490:
491:
492: Using PCRE from MySQL
493: ---------------------
494:
495: On systems where both PCRE and MySQL are installed, it is possible to make use
496: of PCRE from within MySQL, as an alternative to the built-in pattern matching.
497: There is a web page that tells you how to do this:
498:
499: http://www.mysqludf.org/lib_mysqludf_preg/index.php
500:
501:
502: Making new tarballs
503: -------------------
504:
505: The command "make dist" creates three PCRE tarballs, in tar.gz, tar.bz2, and
506: zip formats. The command "make distcheck" does the same, but then does a trial
507: build of the new distribution to ensure that it works.
508:
509: If you have modified any of the man page sources in the doc directory, you
510: should first run the PrepareRelease script before making a distribution. This
511: script creates the .txt and HTML forms of the documentation from the man pages.
512:
513:
514: Testing PCRE
515: ------------
516:
517: To test the basic PCRE library on a Unix system, run the RunTest script that is
518: created by the configuring process. There is also a script called RunGrepTest
519: that tests the options of the pcregrep command. If the C++ wrapper library is
520: built, three test programs called pcrecpp_unittest, pcre_scanner_unittest, and
521: pcre_stringpiece_unittest are also built.
522:
523: Both the scripts and all the program tests are run if you obey "make check" or
524: "make test". For other systems, see the instructions in NON-UNIX-USE.
525:
526: The RunTest script runs the pcretest test program (which is documented in its
527: own man page) on each of the testinput files in the testdata directory in
528: turn, and compares the output with the contents of the corresponding testoutput
529: files. A file called testtry is used to hold the main output from pcretest
530: (testsavedregex is also used as a working file). To run pcretest on just one of
531: the test files, give its number as an argument to RunTest, for example:
532:
533: RunTest 2
534:
535: The first test file can also be fed directly into the perltest.pl script to
536: check that Perl gives the same results. The only difference you should see is
537: in the first few lines, where the Perl version is given instead of the PCRE
538: version.
539:
540: The second set of tests check pcre_fullinfo(), pcre_info(), pcre_study(),
541: pcre_copy_substring(), pcre_get_substring(), pcre_get_substring_list(), error
542: detection, and run-time flags that are specific to PCRE, as well as the POSIX
543: wrapper API. It also uses the debugging flags to check some of the internals of
544: pcre_compile().
545:
546: If you build PCRE with a locale setting that is not the standard C locale, the
547: character tables may be different (see next paragraph). In some cases, this may
548: cause failures in the second set of tests. For example, in a locale where the
549: isprint() function yields TRUE for characters in the range 128-255, the use of
550: [:isascii:] inside a character class defines a different set of characters, and
551: this shows up in this test as a difference in the compiled code, which is being
552: listed for checking. Where the comparison test output contains [\x00-\x7f] the
553: test will contain [\x00-\xff], and similarly in some other cases. This is not a
554: bug in PCRE.
555:
556: The third set of tests checks pcre_maketables(), the facility for building a
557: set of character tables for a specific locale and using them instead of the
558: default tables. The tests make use of the "fr_FR" (French) locale. Before
559: running the test, the script checks for the presence of this locale by running
560: the "locale" command. If that command fails, or if it doesn't include "fr_FR"
561: in the list of available locales, the third test cannot be run, and a comment
562: is output to say why. If running this test produces instances of the error
563:
564: ** Failed to set locale "fr_FR"
565:
566: in the comparison output, it means that locale is not available on your system,
567: despite being listed by "locale". This does not mean that PCRE is broken.
568:
569: [If you are trying to run this test on Windows, you may be able to get it to
570: work by changing "fr_FR" to "french" everywhere it occurs. Alternatively, use
571: RunTest.bat. The version of RunTest.bat included with PCRE 7.4 and above uses
572: Windows versions of test 2. More info on using RunTest.bat is included in the
573: document entitled NON-UNIX-USE.]
574:
575: The fourth test checks the UTF-8 support. It is not run automatically unless
576: PCRE is built with UTF-8 support. To do this you must set --enable-utf8 when
577: running "configure". This file can be also fed directly to the perltest.pl
578: script, provided you are running Perl 5.8 or higher.
579:
580: The fifth test checks error handling with UTF-8 encoding, and internal UTF-8
581: features of PCRE that are not relevant to Perl.
582:
583: The sixth test (which is Perl-5.10 compatible) checks the support for Unicode
584: character properties. It it not run automatically unless PCRE is built with
585: Unicode property support. To to this you must set --enable-unicode-properties
586: when running "configure".
587:
588: The seventh, eighth, and ninth tests check the pcre_dfa_exec() alternative
589: matching function, in non-UTF-8 mode, UTF-8 mode, and UTF-8 mode with Unicode
590: property support, respectively. The eighth and ninth tests are not run
591: automatically unless PCRE is build with the relevant support.
592:
593: The tenth test checks some internal offsets and code size features; it is run
594: only when the default "link size" of 2 is set (in other cases the sizes
595: change).
596:
597: The eleventh test checks out features that are new in Perl 5.10, and the
598: twelfth test checks a number internals and non-Perl features concerned with
599: Unicode property support. It it not run automatically unless PCRE is built with
600: Unicode property support. To to this you must set --enable-unicode-properties
601: when running "configure".
602:
603:
604: Character tables
605: ----------------
606:
607: For speed, PCRE uses four tables for manipulating and identifying characters
608: whose code point values are less than 256. The final argument of the
609: pcre_compile() function is a pointer to a block of memory containing the
610: concatenated tables. A call to pcre_maketables() can be used to generate a set
611: of tables in the current locale. If the final argument for pcre_compile() is
612: passed as NULL, a set of default tables that is built into the binary is used.
613:
614: The source file called pcre_chartables.c contains the default set of tables. By
615: default, this is created as a copy of pcre_chartables.c.dist, which contains
616: tables for ASCII coding. However, if --enable-rebuild-chartables is specified
617: for ./configure, a different version of pcre_chartables.c is built by the
618: program dftables (compiled from dftables.c), which uses the ANSI C character
619: handling functions such as isalnum(), isalpha(), isupper(), islower(), etc. to
620: build the table sources. This means that the default C locale which is set for
621: your system will control the contents of these default tables. You can change
622: the default tables by editing pcre_chartables.c and then re-building PCRE. If
623: you do this, you should take care to ensure that the file does not get
624: automatically re-generated. The best way to do this is to move
625: pcre_chartables.c.dist out of the way and replace it with your customized
626: tables.
627:
628: When the dftables program is run as a result of --enable-rebuild-chartables,
629: it uses the default C locale that is set on your system. It does not pay
630: attention to the LC_xxx environment variables. In other words, it uses the
631: system's default locale rather than whatever the compiling user happens to have
632: set. If you really do want to build a source set of character tables in a
633: locale that is specified by the LC_xxx variables, you can run the dftables
634: program by hand with the -L option. For example:
635:
636: ./dftables -L pcre_chartables.c.special
637:
638: The first two 256-byte tables provide lower casing and case flipping functions,
639: respectively. The next table consists of three 32-byte bit maps which identify
640: digits, "word" characters, and white space, respectively. These are used when
641: building 32-byte bit maps that represent character classes for code points less
642: than 256.
643:
644: The final 256-byte table has bits indicating various character types, as
645: follows:
646:
647: 1 white space character
648: 2 letter
649: 4 decimal digit
650: 8 hexadecimal digit
651: 16 alphanumeric or '_'
652: 128 regular expression metacharacter or binary zero
653:
654: You should not alter the set of characters that contain the 128 bit, as that
655: will cause PCRE to malfunction.
656:
657:
658: File manifest
659: -------------
660:
661: The distribution should contain the following files:
662:
663: (A) Source files of the PCRE library functions and their headers:
664:
665: dftables.c auxiliary program for building pcre_chartables.c
666: when --enable-rebuild-chartables is specified
667:
668: pcre_chartables.c.dist a default set of character tables that assume ASCII
669: coding; used, unless --enable-rebuild-chartables is
670: specified, by copying to pcre_chartables.c
671:
672: pcreposix.c )
673: pcre_compile.c )
674: pcre_config.c )
675: pcre_dfa_exec.c )
676: pcre_exec.c )
677: pcre_fullinfo.c )
678: pcre_get.c ) sources for the functions in the library,
679: pcre_globals.c ) and some internal functions that they use
680: pcre_info.c )
681: pcre_maketables.c )
682: pcre_newline.c )
683: pcre_ord2utf8.c )
684: pcre_refcount.c )
685: pcre_study.c )
686: pcre_tables.c )
687: pcre_try_flipped.c )
688: pcre_ucd.c )
689: pcre_valid_utf8.c )
690: pcre_version.c )
691: pcre_xclass.c )
692: pcre_printint.src ) debugging function that is #included in pcretest,
693: ) and can also be #included in pcre_compile()
694: pcre.h.in template for pcre.h when built by "configure"
695: pcreposix.h header for the external POSIX wrapper API
696: pcre_internal.h header for internal use
697: ucp.h header for Unicode property handling
698:
699: config.h.in template for config.h, which is built by "configure"
700:
701: pcrecpp.h public header file for the C++ wrapper
702: pcrecpparg.h.in template for another C++ header file
703: pcre_scanner.h public header file for C++ scanner functions
704: pcrecpp.cc )
705: pcre_scanner.cc ) source for the C++ wrapper library
706:
707: pcre_stringpiece.h.in template for pcre_stringpiece.h, the header for the
708: C++ stringpiece functions
709: pcre_stringpiece.cc source for the C++ stringpiece functions
710:
711: (B) Source files for programs that use PCRE:
712:
713: pcredemo.c simple demonstration of coding calls to PCRE
714: pcregrep.c source of a grep utility that uses PCRE
715: pcretest.c comprehensive test program
716:
717: (C) Auxiliary files:
718:
719: 132html script to turn "man" pages into HTML
720: AUTHORS information about the author of PCRE
721: ChangeLog log of changes to the code
722: CleanTxt script to clean nroff output for txt man pages
723: Detrail script to remove trailing spaces
724: HACKING some notes about the internals of PCRE
725: INSTALL generic installation instructions
726: LICENCE conditions for the use of PCRE
727: COPYING the same, using GNU's standard name
728: Makefile.in ) template for Unix Makefile, which is built by
729: ) "configure"
730: Makefile.am ) the automake input that was used to create
731: ) Makefile.in
732: NEWS important changes in this release
733: NON-UNIX-USE notes on building PCRE on non-Unix systems
734: PrepareRelease script to make preparations for "make dist"
735: README this file
736: RunTest a Unix shell script for running tests
737: RunGrepTest a Unix shell script for pcregrep tests
738: aclocal.m4 m4 macros (generated by "aclocal")
739: config.guess ) files used by libtool,
740: config.sub ) used only when building a shared library
741: configure a configuring shell script (built by autoconf)
742: configure.ac ) the autoconf input that was used to build
743: ) "configure" and config.h
744: depcomp ) script to find program dependencies, generated by
745: ) automake
746: doc/*.3 man page sources for PCRE
747: doc/*.1 man page sources for pcregrep and pcretest
748: doc/index.html.src the base HTML page
749: doc/html/* HTML documentation
750: doc/pcre.txt plain text version of the man pages
751: doc/pcretest.txt plain text documentation of test program
752: doc/perltest.txt plain text documentation of Perl test program
753: install-sh a shell script for installing files
754: libpcre.pc.in template for libpcre.pc for pkg-config
755: libpcreposix.pc.in template for libpcreposix.pc for pkg-config
756: libpcrecpp.pc.in template for libpcrecpp.pc for pkg-config
757: ltmain.sh file used to build a libtool script
758: missing ) common stub for a few missing GNU programs while
759: ) installing, generated by automake
760: mkinstalldirs script for making install directories
761: perltest.pl Perl test program
762: pcre-config.in source of script which retains PCRE information
763: pcrecpp_unittest.cc )
764: pcre_scanner_unittest.cc ) test programs for the C++ wrapper
765: pcre_stringpiece_unittest.cc )
766: testdata/testinput* test data for main library tests
767: testdata/testoutput* expected test results
768: testdata/grep* input and output for pcregrep tests
769:
770: (D) Auxiliary files for cmake support
771:
772: cmake/COPYING-CMAKE-SCRIPTS
773: cmake/FindPackageHandleStandardArgs.cmake
774: cmake/FindReadline.cmake
775: CMakeLists.txt
776: config-cmake.h.in
777:
778: (E) Auxiliary files for VPASCAL
779:
780: makevp.bat
781: makevp_c.txt
782: makevp_l.txt
783: pcregexp.pas
784:
785: (F) Auxiliary files for building PCRE "by hand"
786:
787: pcre.h.generic ) a version of the public PCRE header file
788: ) for use in non-"configure" environments
789: config.h.generic ) a version of config.h for use in non-"configure"
790: ) environments
791:
792: (F) Miscellaneous
793:
794: RunTest.bat a script for running tests under Windows
795:
796: Philip Hazel
797: Email local part: ph10
798: Email domain: cam.ac.uk
799: Last updated: 19 January 2010
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>