Annotation of embedaddon/php/sapi/fpm/php-fpm.conf.in, revision 1.1.1.2
1.1 misho 1: ;;;;;;;;;;;;;;;;;;;;;
2: ; FPM Configuration ;
3: ;;;;;;;;;;;;;;;;;;;;;
4:
5: ; All relative paths in this configuration file are relative to PHP's install
6: ; prefix (@prefix@). This prefix can be dynamicaly changed by using the
7: ; '-p' argument from the command line.
8:
9: ; Include one or more files. If glob(3) exists, it is used to include a bunch of
10: ; files from a glob(3) pattern. This directive can be used everywhere in the
11: ; file.
12: ; Relative path can also be used. They will be prefixed by:
13: ; - the global prefix if it's been set (-p arguement)
14: ; - @prefix@ otherwise
15: ;include=etc/fpm.d/*.conf
16:
17: ;;;;;;;;;;;;;;;;;;
18: ; Global Options ;
19: ;;;;;;;;;;;;;;;;;;
20:
21: [global]
22: ; Pid file
23: ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
24: ; Default Value: none
25: ;pid = run/php-fpm.pid
26:
27: ; Error log file
28: ; If it's set to "syslog", log is sent to syslogd instead of being written
29: ; in a local file.
30: ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
31: ; Default Value: log/php-fpm.log
32: ;error_log = log/php-fpm.log
33:
34: ; syslog_facility is used to specify what type of program is logging the
35: ; message. This lets syslogd specify that messages from different facilities
36: ; will be handled differently.
37: ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
38: ; Default Value: daemon
39: ;syslog.facility = daemon
40:
41: ; syslog_ident is prepended to every message. If you have multiple FPM
42: ; instances running on the same server, you can change the default value
43: ; which must suit common needs.
44: ; Default Value: php-fpm
45: ;syslog.ident = php-fpm
46:
47: ; Log level
48: ; Possible Values: alert, error, warning, notice, debug
49: ; Default Value: notice
50: ;log_level = notice
51:
52: ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
53: ; interval set by emergency_restart_interval then FPM will restart. A value
54: ; of '0' means 'Off'.
55: ; Default Value: 0
56: ;emergency_restart_threshold = 0
57:
58: ; Interval of time used by emergency_restart_interval to determine when
59: ; a graceful restart will be initiated. This can be useful to work around
60: ; accidental corruptions in an accelerator's shared memory.
61: ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
62: ; Default Unit: seconds
63: ; Default Value: 0
64: ;emergency_restart_interval = 0
65:
66: ; Time limit for child processes to wait for a reaction on signals from master.
67: ; Available units: s(econds), m(inutes), h(ours), or d(ays)
68: ; Default Unit: seconds
69: ; Default Value: 0
70: ;process_control_timeout = 0
71:
72: ; The maximum number of processes FPM will fork. This has been design to control
73: ; the global number of processes when using dynamic PM within a lot of pools.
74: ; Use it with caution.
75: ; Note: A value of 0 indicates no limit
76: ; Default Value: 0
77: ; process.max = 128
78:
79: ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
80: ; Default Value: yes
81: ;daemonize = yes
82:
83: ; Set open file descriptor rlimit for the master process.
84: ; Default Value: system defined value
85: ;rlimit_files = 1024
86:
87: ; Set max core size rlimit for the master process.
88: ; Possible Values: 'unlimited' or an integer greater or equal to 0
89: ; Default Value: system defined value
90: ;rlimit_core = 0
91:
92: ; Specify the event mechanism FPM will use. The following is available:
93: ; - select (any POSIX os)
94: ; - poll (any POSIX os)
95: ; - epoll (linux >= 2.5.44)
96: ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
97: ; - /dev/poll (Solaris >= 7)
98: ; - port (Solaris >= 10)
99: ; Default Value: not set (auto detection)
100: ; events.mechanism = epoll
101:
102: ;;;;;;;;;;;;;;;;;;;;
103: ; Pool Definitions ;
104: ;;;;;;;;;;;;;;;;;;;;
105:
106: ; Multiple pools of child processes may be started with different listening
107: ; ports and different management options. The name of the pool will be
108: ; used in logs and stats. There is no limitation on the number of pools which
109: ; FPM can handle. Your system will tell you anyway :)
110:
111: ; Start a new pool named 'www'.
112: ; the variable $pool can we used in any directive and will be replaced by the
113: ; pool name ('www' here)
114: [www]
115:
116: ; Per pool prefix
117: ; It only applies on the following directives:
118: ; - 'slowlog'
119: ; - 'listen' (unixsocket)
120: ; - 'chroot'
121: ; - 'chdir'
122: ; - 'php_values'
123: ; - 'php_admin_values'
124: ; When not set, the global prefix (or @php_fpm_prefix@) applies instead.
125: ; Note: This directive can also be relative to the global prefix.
126: ; Default Value: none
127: ;prefix = /path/to/pools/$pool
128:
129: ; Unix user/group of processes
130: ; Note: The user is mandatory. If the group is not set, the default user's group
131: ; will be used.
132: user = @php_fpm_user@
133: group = @php_fpm_group@
134:
135: ; The address on which to accept FastCGI requests.
136: ; Valid syntaxes are:
137: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
138: ; a specific port;
139: ; 'port' - to listen on a TCP socket to all addresses on a
140: ; specific port;
141: ; '/path/to/unix/socket' - to listen on a unix socket.
142: ; Note: This value is mandatory.
143: listen = 127.0.0.1:9000
144:
1.1.1.2 ! misho 145: ; Set listen(2) backlog.
1.1 misho 146: ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
1.1.1.2 ! misho 147: ;listen.backlog = 128
1.1 misho 148:
149: ; Set permissions for unix socket, if one is used. In Linux, read/write
150: ; permissions must be set in order to allow connections from a web server. Many
151: ; BSD-derived systems allow connections regardless of permissions.
152: ; Default Values: user and group are set as the running user
153: ; mode is set to 0666
154: ;listen.owner = @php_fpm_user@
155: ;listen.group = @php_fpm_group@
156: ;listen.mode = 0666
157:
158: ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
159: ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
160: ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
161: ; must be separated by a comma. If this value is left blank, connections will be
162: ; accepted from any ip address.
163: ; Default Value: any
164: ;listen.allowed_clients = 127.0.0.1
165:
166: ; Choose how the process manager will control the number of child processes.
167: ; Possible Values:
168: ; static - a fixed number (pm.max_children) of child processes;
169: ; dynamic - the number of child processes are set dynamically based on the
170: ; following directives. With this process management, there will be
171: ; always at least 1 children.
172: ; pm.max_children - the maximum number of children that can
173: ; be alive at the same time.
174: ; pm.start_servers - the number of children created on startup.
175: ; pm.min_spare_servers - the minimum number of children in 'idle'
176: ; state (waiting to process). If the number
177: ; of 'idle' processes is less than this
178: ; number then some children will be created.
179: ; pm.max_spare_servers - the maximum number of children in 'idle'
180: ; state (waiting to process). If the number
181: ; of 'idle' processes is greater than this
182: ; number then some children will be killed.
183: ; ondemand - no children are created at startup. Children will be forked when
184: ; new requests will connect. The following parameter are used:
185: ; pm.max_children - the maximum number of children that
186: ; can be alive at the same time.
187: ; pm.process_idle_timeout - The number of seconds after which
188: ; an idle process will be killed.
189: ; Note: This value is mandatory.
190: pm = dynamic
191:
192: ; The number of child processes to be created when pm is set to 'static' and the
193: ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
194: ; This value sets the limit on the number of simultaneous requests that will be
195: ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
196: ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
197: ; CGI. The below defaults are based on a server without much resources. Don't
198: ; forget to tweak pm.* to fit your needs.
199: ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
200: ; Note: This value is mandatory.
201: pm.max_children = 5
202:
203: ; The number of child processes created on startup.
204: ; Note: Used only when pm is set to 'dynamic'
205: ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
206: pm.start_servers = 2
207:
208: ; The desired minimum number of idle server processes.
209: ; Note: Used only when pm is set to 'dynamic'
210: ; Note: Mandatory when pm is set to 'dynamic'
211: pm.min_spare_servers = 1
212:
213: ; The desired maximum number of idle server processes.
214: ; Note: Used only when pm is set to 'dynamic'
215: ; Note: Mandatory when pm is set to 'dynamic'
216: pm.max_spare_servers = 3
217:
218: ; The number of seconds after which an idle process will be killed.
219: ; Note: Used only when pm is set to 'ondemand'
220: ; Default Value: 10s
221: ;pm.process_idle_timeout = 10s;
222:
223: ; The number of requests each child process should execute before respawning.
224: ; This can be useful to work around memory leaks in 3rd party libraries. For
225: ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
226: ; Default Value: 0
227: ;pm.max_requests = 500
228:
229: ; The URI to view the FPM status page. If this value is not set, no URI will be
230: ; recognized as a status page. It shows the following informations:
231: ; pool - the name of the pool;
232: ; process manager - static, dynamic or ondemand;
233: ; start time - the date and time FPM has started;
234: ; start since - number of seconds since FPM has started;
235: ; accepted conn - the number of request accepted by the pool;
236: ; listen queue - the number of request in the queue of pending
237: ; connections (see backlog in listen(2));
238: ; max listen queue - the maximum number of requests in the queue
239: ; of pending connections since FPM has started;
240: ; listen queue len - the size of the socket queue of pending connections;
241: ; idle processes - the number of idle processes;
242: ; active processes - the number of active processes;
243: ; total processes - the number of idle + active processes;
244: ; max active processes - the maximum number of active processes since FPM
245: ; has started;
246: ; max children reached - number of times, the process limit has been reached,
247: ; when pm tries to start more children (works only for
248: ; pm 'dynamic' and 'ondemand');
249: ; Value are updated in real time.
250: ; Example output:
251: ; pool: www
252: ; process manager: static
253: ; start time: 01/Jul/2011:17:53:49 +0200
254: ; start since: 62636
255: ; accepted conn: 190460
256: ; listen queue: 0
257: ; max listen queue: 1
258: ; listen queue len: 42
259: ; idle processes: 4
260: ; active processes: 11
261: ; total processes: 15
262: ; max active processes: 12
263: ; max children reached: 0
264: ;
265: ; By default the status page output is formatted as text/plain. Passing either
266: ; 'html', 'xml' or 'json' in the query string will return the corresponding
267: ; output syntax. Example:
268: ; http://www.foo.bar/status
269: ; http://www.foo.bar/status?json
270: ; http://www.foo.bar/status?html
271: ; http://www.foo.bar/status?xml
272: ;
273: ; By default the status page only outputs short status. Passing 'full' in the
274: ; query string will also return status for each pool process.
275: ; Example:
276: ; http://www.foo.bar/status?full
277: ; http://www.foo.bar/status?json&full
278: ; http://www.foo.bar/status?html&full
279: ; http://www.foo.bar/status?xml&full
280: ; The Full status returns for each process:
281: ; pid - the PID of the process;
282: ; state - the state of the process (Idle, Running, ...);
283: ; start time - the date and time the process has started;
284: ; start since - the number of seconds since the process has started;
285: ; requests - the number of requests the process has served;
286: ; request duration - the duration in µs of the requests;
287: ; request method - the request method (GET, POST, ...);
288: ; request URI - the request URI with the query string;
289: ; content length - the content length of the request (only with POST);
290: ; user - the user (PHP_AUTH_USER) (or '-' if not set);
291: ; script - the main script called (or '-' if not set);
292: ; last request cpu - the %cpu the last request consumed
293: ; it's always 0 if the process is not in Idle state
294: ; because CPU calculation is done when the request
295: ; processing has terminated;
296: ; last request memory - the max amount of memory the last request consumed
297: ; it's always 0 if the process is not in Idle state
298: ; because memory calculation is done when the request
299: ; processing has terminated;
300: ; If the process is in Idle state, then informations are related to the
301: ; last request the process has served. Otherwise informations are related to
302: ; the current request being served.
303: ; Example output:
304: ; ************************
305: ; pid: 31330
306: ; state: Running
307: ; start time: 01/Jul/2011:17:53:49 +0200
308: ; start since: 63087
309: ; requests: 12808
310: ; request duration: 1250261
311: ; request method: GET
312: ; request URI: /test_mem.php?N=10000
313: ; content length: 0
314: ; user: -
315: ; script: /home/fat/web/docs/php/test_mem.php
316: ; last request cpu: 0.00
317: ; last request memory: 0
318: ;
319: ; Note: There is a real-time FPM status monitoring sample web page available
320: ; It's available in: @EXPANDED_DATADIR@/php/fpm/status.html
321: ;
322: ; Note: The value must start with a leading slash (/). The value can be
323: ; anything, but it may not be a good idea to use the .php extension or it
324: ; may conflict with a real PHP file.
325: ; Default Value: not set
326: ;pm.status_path = /status
327:
328: ; The ping URI to call the monitoring page of FPM. If this value is not set, no
329: ; URI will be recognized as a ping page. This could be used to test from outside
330: ; that FPM is alive and responding, or to
331: ; - create a graph of FPM availability (rrd or such);
332: ; - remove a server from a group if it is not responding (load balancing);
333: ; - trigger alerts for the operating team (24/7).
334: ; Note: The value must start with a leading slash (/). The value can be
335: ; anything, but it may not be a good idea to use the .php extension or it
336: ; may conflict with a real PHP file.
337: ; Default Value: not set
338: ;ping.path = /ping
339:
340: ; This directive may be used to customize the response of a ping request. The
341: ; response is formatted as text/plain with a 200 response code.
342: ; Default Value: pong
343: ;ping.response = pong
344:
345: ; The access log file
346: ; Default: not set
347: ;access.log = log/$pool.access.log
348:
349: ; The access log format.
350: ; The following syntax is allowed
351: ; %%: the '%' character
352: ; %C: %CPU used by the request
353: ; it can accept the following format:
354: ; - %{user}C for user CPU only
355: ; - %{system}C for system CPU only
356: ; - %{total}C for user + system CPU (default)
357: ; %d: time taken to serve the request
358: ; it can accept the following format:
359: ; - %{seconds}d (default)
360: ; - %{miliseconds}d
361: ; - %{mili}d
362: ; - %{microseconds}d
363: ; - %{micro}d
364: ; %e: an environment variable (same as $_ENV or $_SERVER)
365: ; it must be associated with embraces to specify the name of the env
366: ; variable. Some exemples:
367: ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
368: ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
369: ; %f: script filename
370: ; %l: content-length of the request (for POST request only)
371: ; %m: request method
372: ; %M: peak of memory allocated by PHP
373: ; it can accept the following format:
374: ; - %{bytes}M (default)
375: ; - %{kilobytes}M
376: ; - %{kilo}M
377: ; - %{megabytes}M
378: ; - %{mega}M
379: ; %n: pool name
380: ; %o: ouput header
381: ; it must be associated with embraces to specify the name of the header:
382: ; - %{Content-Type}o
383: ; - %{X-Powered-By}o
384: ; - %{Transfert-Encoding}o
385: ; - ....
386: ; %p: PID of the child that serviced the request
387: ; %P: PID of the parent of the child that serviced the request
388: ; %q: the query string
389: ; %Q: the '?' character if query string exists
390: ; %r: the request URI (without the query string, see %q and %Q)
391: ; %R: remote IP address
392: ; %s: status (response code)
393: ; %t: server time the request was received
394: ; it can accept a strftime(3) format:
395: ; %d/%b/%Y:%H:%M:%S %z (default)
396: ; %T: time the log has been written (the request has finished)
397: ; it can accept a strftime(3) format:
398: ; %d/%b/%Y:%H:%M:%S %z (default)
399: ; %u: remote user
400: ;
401: ; Default: "%R - %u %t \"%m %r\" %s"
1.1.1.2 ! misho 402: ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
1.1 misho 403:
404: ; The log file for slow requests
405: ; Default Value: not set
406: ; Note: slowlog is mandatory if request_slowlog_timeout is set
407: ;slowlog = log/$pool.log.slow
408:
409: ; The timeout for serving a single request after which a PHP backtrace will be
410: ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
411: ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
412: ; Default Value: 0
413: ;request_slowlog_timeout = 0
414:
415: ; The timeout for serving a single request after which the worker process will
416: ; be killed. This option should be used when the 'max_execution_time' ini option
417: ; does not stop script execution for some reason. A value of '0' means 'off'.
418: ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
419: ; Default Value: 0
420: ;request_terminate_timeout = 0
421:
422: ; Set open file descriptor rlimit.
423: ; Default Value: system defined value
424: ;rlimit_files = 1024
425:
426: ; Set max core size rlimit.
427: ; Possible Values: 'unlimited' or an integer greater or equal to 0
428: ; Default Value: system defined value
429: ;rlimit_core = 0
430:
431: ; Chroot to this directory at the start. This value must be defined as an
432: ; absolute path. When this value is not set, chroot is not used.
433: ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
434: ; of its subdirectories. If the pool prefix is not set, the global prefix
435: ; will be used instead.
436: ; Note: chrooting is a great security feature and should be used whenever
437: ; possible. However, all PHP paths will be relative to the chroot
438: ; (error_log, sessions.save_path, ...).
439: ; Default Value: not set
440: ;chroot =
441:
442: ; Chdir to this directory at the start.
443: ; Note: relative path can be used.
444: ; Default Value: current directory or / when chroot
445: ;chdir = /var/www
446:
447: ; Redirect worker stdout and stderr into main error log. If not set, stdout and
448: ; stderr will be redirected to /dev/null according to FastCGI specs.
449: ; Note: on highloaded environement, this can cause some delay in the page
450: ; process time (several ms).
451: ; Default Value: no
452: ;catch_workers_output = yes
453:
454: ; Limits the extensions of the main script FPM will allow to parse. This can
455: ; prevent configuration mistakes on the web server side. You should only limit
456: ; FPM to .php extensions to prevent malicious users to use other extensions to
457: ; exectute php code.
458: ; Note: set an empty value to allow all extensions.
459: ; Default Value: .php
460: ;security.limit_extensions = .php .php3 .php4 .php5
461:
462: ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
463: ; the current environment.
464: ; Default Value: clean env
465: ;env[HOSTNAME] = $HOSTNAME
466: ;env[PATH] = /usr/local/bin:/usr/bin:/bin
467: ;env[TMP] = /tmp
468: ;env[TMPDIR] = /tmp
469: ;env[TEMP] = /tmp
470:
471: ; Additional php.ini defines, specific to this pool of workers. These settings
472: ; overwrite the values previously defined in the php.ini. The directives are the
473: ; same as the PHP SAPI:
474: ; php_value/php_flag - you can set classic ini defines which can
475: ; be overwritten from PHP call 'ini_set'.
476: ; php_admin_value/php_admin_flag - these directives won't be overwritten by
477: ; PHP call 'ini_set'
478: ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
479:
480: ; Defining 'extension' will load the corresponding shared extension from
481: ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
482: ; overwrite previously defined php.ini values, but will append the new value
483: ; instead.
484:
485: ; Note: path INI options can be relative and will be expanded with the prefix
486: ; (pool, global or @prefix@)
487:
488: ; Default Value: nothing is defined by default except the values in php.ini and
489: ; specified at startup with the -d argument
490: ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
491: ;php_flag[display_errors] = off
492: ;php_admin_value[error_log] = /var/log/fpm-php.www.log
493: ;php_admin_flag[log_errors] = on
494: ;php_admin_value[memory_limit] = 32M
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to php-fpm.conf.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / php / sapi / fpm