1: ;;;;;;;;;;;;;;;;;;;;;
2: ; FPM Configuration ;
3: ;;;;;;;;;;;;;;;;;;;;;
4:
5: ; All relative paths in this configuration file are relative to PHP's install
6: ; prefix (@prefix@). This prefix can be dynamically changed by using the
7: ; '-p' argument from the command line.
8:
9: ; Include one or more files. If glob(3) exists, it is used to include a bunch of
10: ; files from a glob(3) pattern. This directive can be used everywhere in the
11: ; file.
12: ; Relative path can also be used. They will be prefixed by:
13: ; - the global prefix if it's been set (-p argument)
14: ; - @prefix@ otherwise
15: ;include=etc/fpm.d/*.conf
16:
17: ;;;;;;;;;;;;;;;;;;
18: ; Global Options ;
19: ;;;;;;;;;;;;;;;;;;
20:
21: [global]
22: ; Pid file
23: ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
24: ; Default Value: none
25: ;pid = run/php-fpm.pid
26:
27: ; Error log file
28: ; If it's set to "syslog", log is sent to syslogd instead of being written
29: ; in a local file.
30: ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
31: ; Default Value: log/php-fpm.log
32: ;error_log = log/php-fpm.log
33:
34: ; syslog_facility is used to specify what type of program is logging the
35: ; message. This lets syslogd specify that messages from different facilities
36: ; will be handled differently.
37: ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
38: ; Default Value: daemon
39: ;syslog.facility = daemon
40:
41: ; syslog_ident is prepended to every message. If you have multiple FPM
42: ; instances running on the same server, you can change the default value
43: ; which must suit common needs.
44: ; Default Value: php-fpm
45: ;syslog.ident = php-fpm
46:
47: ; Log level
48: ; Possible Values: alert, error, warning, notice, debug
49: ; Default Value: notice
50: ;log_level = notice
51:
52: ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
53: ; interval set by emergency_restart_interval then FPM will restart. A value
54: ; of '0' means 'Off'.
55: ; Default Value: 0
56: ;emergency_restart_threshold = 0
57:
58: ; Interval of time used by emergency_restart_interval to determine when
59: ; a graceful restart will be initiated. This can be useful to work around
60: ; accidental corruptions in an accelerator's shared memory.
61: ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
62: ; Default Unit: seconds
63: ; Default Value: 0
64: ;emergency_restart_interval = 0
65:
66: ; Time limit for child processes to wait for a reaction on signals from master.
67: ; Available units: s(econds), m(inutes), h(ours), or d(ays)
68: ; Default Unit: seconds
69: ; Default Value: 0
70: ;process_control_timeout = 0
71:
72: ; The maximum number of processes FPM will fork. This has been design to control
73: ; the global number of processes when using dynamic PM within a lot of pools.
74: ; Use it with caution.
75: ; Note: A value of 0 indicates no limit
76: ; Default Value: 0
77: ; process.max = 128
78:
79: ; Specify the nice(2) priority to apply to the master process (only if set)
80: ; The value can vary from -19 (highest priority) to 20 (lower priority)
81: ; Note: - It will only work if the FPM master process is launched as root
82: ; - The pool process will inherit the master process priority
83: ; unless it specified otherwise
84: ; Default Value: no set
85: ; process.priority = -19
86:
87: ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
88: ; Default Value: yes
89: ;daemonize = yes
90:
91: ; Set open file descriptor rlimit for the master process.
92: ; Default Value: system defined value
93: ;rlimit_files = 1024
94:
95: ; Set max core size rlimit for the master process.
96: ; Possible Values: 'unlimited' or an integer greater or equal to 0
97: ; Default Value: system defined value
98: ;rlimit_core = 0
99:
100: ; Specify the event mechanism FPM will use. The following is available:
101: ; - select (any POSIX os)
102: ; - poll (any POSIX os)
103: ; - epoll (linux >= 2.5.44)
104: ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
105: ; - /dev/poll (Solaris >= 7)
106: ; - port (Solaris >= 10)
107: ; Default Value: not set (auto detection)
108: ;events.mechanism = epoll
109:
110: ; When FPM is build with systemd integration, specify the interval,
111: ; in second, between health report notification to systemd.
112: ; Set to 0 to disable.
113: ; Available Units: s(econds), m(inutes), h(ours)
114: ; Default Unit: seconds
115: ; Default value: 10
116: ;systemd_interval = 10
117:
118: ;;;;;;;;;;;;;;;;;;;;
119: ; Pool Definitions ;
120: ;;;;;;;;;;;;;;;;;;;;
121:
122: ; Multiple pools of child processes may be started with different listening
123: ; ports and different management options. The name of the pool will be
124: ; used in logs and stats. There is no limitation on the number of pools which
125: ; FPM can handle. Your system will tell you anyway :)
126:
127: ; Start a new pool named 'www'.
128: ; the variable $pool can we used in any directive and will be replaced by the
129: ; pool name ('www' here)
130: [www]
131:
132: ; Per pool prefix
133: ; It only applies on the following directives:
134: ; - 'slowlog'
135: ; - 'listen' (unixsocket)
136: ; - 'chroot'
137: ; - 'chdir'
138: ; - 'php_values'
139: ; - 'php_admin_values'
140: ; When not set, the global prefix (or @php_fpm_prefix@) applies instead.
141: ; Note: This directive can also be relative to the global prefix.
142: ; Default Value: none
143: ;prefix = /path/to/pools/$pool
144:
145: ; Unix user/group of processes
146: ; Note: The user is mandatory. If the group is not set, the default user's group
147: ; will be used.
148: user = @php_fpm_user@
149: group = @php_fpm_group@
150:
151: ; The address on which to accept FastCGI requests.
152: ; Valid syntaxes are:
153: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
154: ; a specific port;
155: ; 'port' - to listen on a TCP socket to all addresses on a
156: ; specific port;
157: ; '/path/to/unix/socket' - to listen on a unix socket.
158: ; Note: This value is mandatory.
159: listen = 127.0.0.1:9000
160:
161: ; Set listen(2) backlog.
162: ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
163: ;listen.backlog = 128
164:
165: ; Set permissions for unix socket, if one is used. In Linux, read/write
166: ; permissions must be set in order to allow connections from a web server. Many
167: ; BSD-derived systems allow connections regardless of permissions.
168: ; Default Values: user and group are set as the running user
169: ; mode is set to 0660
170: ;listen.owner = @php_fpm_user@
171: ;listen.group = @php_fpm_group@
172: ;listen.mode = 0660
173:
174: ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
175: ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
176: ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
177: ; must be separated by a comma. If this value is left blank, connections will be
178: ; accepted from any ip address.
179: ; Default Value: any
180: ;listen.allowed_clients = 127.0.0.1
181:
182: ; Specify the nice(2) priority to apply to the pool processes (only if set)
183: ; The value can vary from -19 (highest priority) to 20 (lower priority)
184: ; Note: - It will only work if the FPM master process is launched as root
185: ; - The pool processes will inherit the master process priority
186: ; unless it specified otherwise
187: ; Default Value: no set
188: ; process.priority = -19
189:
190: ; Choose how the process manager will control the number of child processes.
191: ; Possible Values:
192: ; static - a fixed number (pm.max_children) of child processes;
193: ; dynamic - the number of child processes are set dynamically based on the
194: ; following directives. With this process management, there will be
195: ; always at least 1 children.
196: ; pm.max_children - the maximum number of children that can
197: ; be alive at the same time.
198: ; pm.start_servers - the number of children created on startup.
199: ; pm.min_spare_servers - the minimum number of children in 'idle'
200: ; state (waiting to process). If the number
201: ; of 'idle' processes is less than this
202: ; number then some children will be created.
203: ; pm.max_spare_servers - the maximum number of children in 'idle'
204: ; state (waiting to process). If the number
205: ; of 'idle' processes is greater than this
206: ; number then some children will be killed.
207: ; ondemand - no children are created at startup. Children will be forked when
208: ; new requests will connect. The following parameter are used:
209: ; pm.max_children - the maximum number of children that
210: ; can be alive at the same time.
211: ; pm.process_idle_timeout - The number of seconds after which
212: ; an idle process will be killed.
213: ; Note: This value is mandatory.
214: pm = dynamic
215:
216: ; The number of child processes to be created when pm is set to 'static' and the
217: ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
218: ; This value sets the limit on the number of simultaneous requests that will be
219: ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
220: ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
221: ; CGI. The below defaults are based on a server without much resources. Don't
222: ; forget to tweak pm.* to fit your needs.
223: ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
224: ; Note: This value is mandatory.
225: pm.max_children = 5
226:
227: ; The number of child processes created on startup.
228: ; Note: Used only when pm is set to 'dynamic'
229: ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
230: pm.start_servers = 2
231:
232: ; The desired minimum number of idle server processes.
233: ; Note: Used only when pm is set to 'dynamic'
234: ; Note: Mandatory when pm is set to 'dynamic'
235: pm.min_spare_servers = 1
236:
237: ; The desired maximum number of idle server processes.
238: ; Note: Used only when pm is set to 'dynamic'
239: ; Note: Mandatory when pm is set to 'dynamic'
240: pm.max_spare_servers = 3
241:
242: ; The number of seconds after which an idle process will be killed.
243: ; Note: Used only when pm is set to 'ondemand'
244: ; Default Value: 10s
245: ;pm.process_idle_timeout = 10s;
246:
247: ; The number of requests each child process should execute before respawning.
248: ; This can be useful to work around memory leaks in 3rd party libraries. For
249: ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
250: ; Default Value: 0
251: ;pm.max_requests = 500
252:
253: ; The URI to view the FPM status page. If this value is not set, no URI will be
254: ; recognized as a status page. It shows the following informations:
255: ; pool - the name of the pool;
256: ; process manager - static, dynamic or ondemand;
257: ; start time - the date and time FPM has started;
258: ; start since - number of seconds since FPM has started;
259: ; accepted conn - the number of request accepted by the pool;
260: ; listen queue - the number of request in the queue of pending
261: ; connections (see backlog in listen(2));
262: ; max listen queue - the maximum number of requests in the queue
263: ; of pending connections since FPM has started;
264: ; listen queue len - the size of the socket queue of pending connections;
265: ; idle processes - the number of idle processes;
266: ; active processes - the number of active processes;
267: ; total processes - the number of idle + active processes;
268: ; max active processes - the maximum number of active processes since FPM
269: ; has started;
270: ; max children reached - number of times, the process limit has been reached,
271: ; when pm tries to start more children (works only for
272: ; pm 'dynamic' and 'ondemand');
273: ; Value are updated in real time.
274: ; Example output:
275: ; pool: www
276: ; process manager: static
277: ; start time: 01/Jul/2011:17:53:49 +0200
278: ; start since: 62636
279: ; accepted conn: 190460
280: ; listen queue: 0
281: ; max listen queue: 1
282: ; listen queue len: 42
283: ; idle processes: 4
284: ; active processes: 11
285: ; total processes: 15
286: ; max active processes: 12
287: ; max children reached: 0
288: ;
289: ; By default the status page output is formatted as text/plain. Passing either
290: ; 'html', 'xml' or 'json' in the query string will return the corresponding
291: ; output syntax. Example:
292: ; http://www.foo.bar/status
293: ; http://www.foo.bar/status?json
294: ; http://www.foo.bar/status?html
295: ; http://www.foo.bar/status?xml
296: ;
297: ; By default the status page only outputs short status. Passing 'full' in the
298: ; query string will also return status for each pool process.
299: ; Example:
300: ; http://www.foo.bar/status?full
301: ; http://www.foo.bar/status?json&full
302: ; http://www.foo.bar/status?html&full
303: ; http://www.foo.bar/status?xml&full
304: ; The Full status returns for each process:
305: ; pid - the PID of the process;
306: ; state - the state of the process (Idle, Running, ...);
307: ; start time - the date and time the process has started;
308: ; start since - the number of seconds since the process has started;
309: ; requests - the number of requests the process has served;
310: ; request duration - the duration in µs of the requests;
311: ; request method - the request method (GET, POST, ...);
312: ; request URI - the request URI with the query string;
313: ; content length - the content length of the request (only with POST);
314: ; user - the user (PHP_AUTH_USER) (or '-' if not set);
315: ; script - the main script called (or '-' if not set);
316: ; last request cpu - the %cpu the last request consumed
317: ; it's always 0 if the process is not in Idle state
318: ; because CPU calculation is done when the request
319: ; processing has terminated;
320: ; last request memory - the max amount of memory the last request consumed
321: ; it's always 0 if the process is not in Idle state
322: ; because memory calculation is done when the request
323: ; processing has terminated;
324: ; If the process is in Idle state, then informations are related to the
325: ; last request the process has served. Otherwise informations are related to
326: ; the current request being served.
327: ; Example output:
328: ; ************************
329: ; pid: 31330
330: ; state: Running
331: ; start time: 01/Jul/2011:17:53:49 +0200
332: ; start since: 63087
333: ; requests: 12808
334: ; request duration: 1250261
335: ; request method: GET
336: ; request URI: /test_mem.php?N=10000
337: ; content length: 0
338: ; user: -
339: ; script: /home/fat/web/docs/php/test_mem.php
340: ; last request cpu: 0.00
341: ; last request memory: 0
342: ;
343: ; Note: There is a real-time FPM status monitoring sample web page available
344: ; It's available in: @EXPANDED_DATADIR@/fpm/status.html
345: ;
346: ; Note: The value must start with a leading slash (/). The value can be
347: ; anything, but it may not be a good idea to use the .php extension or it
348: ; may conflict with a real PHP file.
349: ; Default Value: not set
350: ;pm.status_path = /status
351:
352: ; The ping URI to call the monitoring page of FPM. If this value is not set, no
353: ; URI will be recognized as a ping page. This could be used to test from outside
354: ; that FPM is alive and responding, or to
355: ; - create a graph of FPM availability (rrd or such);
356: ; - remove a server from a group if it is not responding (load balancing);
357: ; - trigger alerts for the operating team (24/7).
358: ; Note: The value must start with a leading slash (/). The value can be
359: ; anything, but it may not be a good idea to use the .php extension or it
360: ; may conflict with a real PHP file.
361: ; Default Value: not set
362: ;ping.path = /ping
363:
364: ; This directive may be used to customize the response of a ping request. The
365: ; response is formatted as text/plain with a 200 response code.
366: ; Default Value: pong
367: ;ping.response = pong
368:
369: ; The access log file
370: ; Default: not set
371: ;access.log = log/$pool.access.log
372:
373: ; The access log format.
374: ; The following syntax is allowed
375: ; %%: the '%' character
376: ; %C: %CPU used by the request
377: ; it can accept the following format:
378: ; - %{user}C for user CPU only
379: ; - %{system}C for system CPU only
380: ; - %{total}C for user + system CPU (default)
381: ; %d: time taken to serve the request
382: ; it can accept the following format:
383: ; - %{seconds}d (default)
384: ; - %{miliseconds}d
385: ; - %{mili}d
386: ; - %{microseconds}d
387: ; - %{micro}d
388: ; %e: an environment variable (same as $_ENV or $_SERVER)
389: ; it must be associated with embraces to specify the name of the env
390: ; variable. Some exemples:
391: ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
392: ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
393: ; %f: script filename
394: ; %l: content-length of the request (for POST request only)
395: ; %m: request method
396: ; %M: peak of memory allocated by PHP
397: ; it can accept the following format:
398: ; - %{bytes}M (default)
399: ; - %{kilobytes}M
400: ; - %{kilo}M
401: ; - %{megabytes}M
402: ; - %{mega}M
403: ; %n: pool name
404: ; %o: output header
405: ; it must be associated with embraces to specify the name of the header:
406: ; - %{Content-Type}o
407: ; - %{X-Powered-By}o
408: ; - %{Transfert-Encoding}o
409: ; - ....
410: ; %p: PID of the child that serviced the request
411: ; %P: PID of the parent of the child that serviced the request
412: ; %q: the query string
413: ; %Q: the '?' character if query string exists
414: ; %r: the request URI (without the query string, see %q and %Q)
415: ; %R: remote IP address
416: ; %s: status (response code)
417: ; %t: server time the request was received
418: ; it can accept a strftime(3) format:
419: ; %d/%b/%Y:%H:%M:%S %z (default)
420: ; %T: time the log has been written (the request has finished)
421: ; it can accept a strftime(3) format:
422: ; %d/%b/%Y:%H:%M:%S %z (default)
423: ; %u: remote user
424: ;
425: ; Default: "%R - %u %t \"%m %r\" %s"
426: ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
427:
428: ; The log file for slow requests
429: ; Default Value: not set
430: ; Note: slowlog is mandatory if request_slowlog_timeout is set
431: ;slowlog = log/$pool.log.slow
432:
433: ; The timeout for serving a single request after which a PHP backtrace will be
434: ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
435: ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
436: ; Default Value: 0
437: ;request_slowlog_timeout = 0
438:
439: ; The timeout for serving a single request after which the worker process will
440: ; be killed. This option should be used when the 'max_execution_time' ini option
441: ; does not stop script execution for some reason. A value of '0' means 'off'.
442: ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
443: ; Default Value: 0
444: ;request_terminate_timeout = 0
445:
446: ; Set open file descriptor rlimit.
447: ; Default Value: system defined value
448: ;rlimit_files = 1024
449:
450: ; Set max core size rlimit.
451: ; Possible Values: 'unlimited' or an integer greater or equal to 0
452: ; Default Value: system defined value
453: ;rlimit_core = 0
454:
455: ; Chroot to this directory at the start. This value must be defined as an
456: ; absolute path. When this value is not set, chroot is not used.
457: ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
458: ; of its subdirectories. If the pool prefix is not set, the global prefix
459: ; will be used instead.
460: ; Note: chrooting is a great security feature and should be used whenever
461: ; possible. However, all PHP paths will be relative to the chroot
462: ; (error_log, sessions.save_path, ...).
463: ; Default Value: not set
464: ;chroot =
465:
466: ; Chdir to this directory at the start.
467: ; Note: relative path can be used.
468: ; Default Value: current directory or / when chroot
469: ;chdir = /var/www
470:
471: ; Redirect worker stdout and stderr into main error log. If not set, stdout and
472: ; stderr will be redirected to /dev/null according to FastCGI specs.
473: ; Note: on highloaded environement, this can cause some delay in the page
474: ; process time (several ms).
475: ; Default Value: no
476: ;catch_workers_output = yes
477:
478: ; Clear environment in FPM workers
479: ; Prevents arbitrary environment variables from reaching FPM worker processes
480: ; by clearing the environment in workers before env vars specified in this
481: ; pool configuration are added.
482: ; Setting to "no" will make all environment variables available to PHP code
483: ; via getenv(), $_ENV and $_SERVER.
484: ; Default Value: yes
485: ;clear_env = no
486:
487: ; Limits the extensions of the main script FPM will allow to parse. This can
488: ; prevent configuration mistakes on the web server side. You should only limit
489: ; FPM to .php extensions to prevent malicious users to use other extensions to
490: ; exectute php code.
491: ; Note: set an empty value to allow all extensions.
492: ; Default Value: .php
493: ;security.limit_extensions = .php .php3 .php4 .php5
494:
495: ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
496: ; the current environment.
497: ; Default Value: clean env
498: ;env[HOSTNAME] = $HOSTNAME
499: ;env[PATH] = /usr/local/bin:/usr/bin:/bin
500: ;env[TMP] = /tmp
501: ;env[TMPDIR] = /tmp
502: ;env[TEMP] = /tmp
503:
504: ; Additional php.ini defines, specific to this pool of workers. These settings
505: ; overwrite the values previously defined in the php.ini. The directives are the
506: ; same as the PHP SAPI:
507: ; php_value/php_flag - you can set classic ini defines which can
508: ; be overwritten from PHP call 'ini_set'.
509: ; php_admin_value/php_admin_flag - these directives won't be overwritten by
510: ; PHP call 'ini_set'
511: ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
512:
513: ; Defining 'extension' will load the corresponding shared extension from
514: ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
515: ; overwrite previously defined php.ini values, but will append the new value
516: ; instead.
517:
518: ; Note: path INI options can be relative and will be expanded with the prefix
519: ; (pool, global or @prefix@)
520:
521: ; Default Value: nothing is defined by default except the values in php.ini and
522: ; specified at startup with the -d argument
523: ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
524: ;php_flag[display_errors] = off
525: ;php_admin_value[error_log] = /var/log/fpm-php.www.log
526: ;php_admin_flag[log_errors] = on
527: ;php_admin_value[memory_limit] = 32M
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to php-fpm.conf.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / embedaddon / php / sapi / fpm